Drawing appied to Technology 1 ESO
description
Transcript of Drawing appied to Technology 1 ESO
![Page 1: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/1.jpg)
Unit 2.Drawing applied to technology
![Page 2: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/2.jpg)
What are we going to see in this unit? 2.1 Drawing tools and how to use them 2.2 Drafts and sketches 2.3 Drafting scale 2.4 Diedric system 2.5 Marking and standardizing
Unit 2.Drawing applied to technology
![Page 3: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/3.jpg)
2.1 Drawing materials and instruments
Paper Paper is made of cellulose that is obtained from trees The paper size that we use is A4 . It is the result of
dividing 1 m2 (A0) four times by half the longest side.
![Page 4: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/4.jpg)
2.1 Drawing materials and instruments
Pencil A pencil has a lead covered with wood. The
lead is made with graphite and clay
clay
Graphite
Lead
Wood cover
![Page 5: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/5.jpg)
2.1 Drawing materials and instruments
Pencil hardness The more clay it contains the harder the lead will be. We use letter H for hard pencils and letter B for soft ones. Hard: H Soft: B
Very hard Hard Medium Soft Very soft
6H 5H 4H 3H 2H H HB B 2B 3B 4B 5B 6B
less clay More clay
Technique draw Artistic draw
![Page 6: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/6.jpg)
2.1 Drawing materials and instruments
Mechanical pencils They hold a graphite lead. They can be used for technical drawing (if used )with a soft lead.
ERASERS Erasers are made of rubber, they absorb graphite and erase it.
![Page 7: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/7.jpg)
2.1 DRAWING TOOLS
THE RULER It is a precision tool that makes it possible to measure and to transfer a distance. TRIANGULAR SET SQUARE A set square is a tool for drawing perpendicular (vertical) and parallel lines and for obtaining angles. There are 2 types of trianglular set squares A 45 degree A 60
degree
![Page 8: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/8.jpg)
2.1 Drawing materials and instruments The Compass It is used for drawing circles and angles
Advice: sharpen the lead tip by rubbing it on a fingernail file
![Page 9: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/9.jpg)
2.2 DRAFT AND SKETCH
DRAFT: It is a free hand drawing (just with a pencil). We show an idea or object without totally defining it.
See picture in Page 41
![Page 10: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/10.jpg)
2.2 DRAFT AND SKETCH
DRAFT: It is a free hand drawing (just with a pencil). We show an idea or object without totally defining it.
See picture in Page 40
![Page 11: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/11.jpg)
2.2 DRAFT AND SKETCH
ATTENTION! A DRAFT IS NOT A BAD DRAWING AND A SKETCH IS NOT A GOOD DRAWING !!!!!!
![Page 12: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/12.jpg)
2.2 DRAFT AND SKETCH
The sketch: It is a free hand drawing too, but it includes the measures, therefore it shows the precise size and a shape similar to the final drawing.
measure
Page 41
![Page 13: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/13.jpg)
2.2 DRAFT AND SKETCH
The difference between them is that the draft gives us a simple idea of the object and the sketch gives us a complete defined picture with measures
DRAFT SKETCH
![Page 14: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/14.jpg)
2.2 DRAFT AND SKETCH
Activity: draw the draft and sketch of your pencil
![Page 15: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/15.jpg)
2.3 Drafting scale
We define scale as the relation between the drawing size and the real object
A model uses a reduction scale
![Page 16: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/16.jpg)
1.3 Drafting scale 1:500000
The Drawing size
The Real size
![Page 17: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/17.jpg)
2.3 Drafting scale
1:2
The Drawing size
The Real size
Page 38
![Page 18: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/18.jpg)
2.3 Drafting scale
200 reality 1cm drawing
1:200
1 cm measured on the drawing is equivalent to 200cm in reality
Page 38
![Page 19: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/19.jpg)
2.3 Drafting scale Scale types:
• Reduction scale: it is used to represent big objects, so they can be drawn on paper – We usually use: 1:2 1:5 1:10…
In this example we have reduced 1000 times the real size of the tree
1:1000 Real drawn Real Real
![Page 20: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/20.jpg)
2.3 Drafting scale Enlargement scale: it is used to represent small objects so we can see them on paper
– It is used: 2:1 5:1 10:1 …
In this example the drawing is two times the real object
2:1 2:1
Drawing
Real
Safety pin
![Page 21: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/21.jpg)
2.3 Drafting scale
An example of scale application • Let’s draw a pencil that is 10cm high
and 1cm wide using different scales: 1:1, 2:1, 1:2, 1:4 1cm
10cm
![Page 22: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/22.jpg)
2.3 Drafting scale
Scale 2:1
High wide
Drawn 2
Real 1 10 1
Real
2:1
![Page 23: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/23.jpg)
2.3 Drafting scale
Scale 1:2
High wide
Drawn 1
Real 2 10 1
2:1
Real
1:2
![Page 24: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/24.jpg)
2.3 Drafting scale
Scale 1:4
High wide
Drawn 1
Real 4 10 1
Real
2:1
1:2
1:4
Real
2:1
1:2
Real
1:2
2:1
Real
1:2
![Page 25: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/25.jpg)
2.3 Drafting scale
Scale exercise • This drawing is 4,5cm long and 2,5 cm
high, if we have used a 1:100 scale How high and long is the real car?
4.5cm
2.5cm
![Page 26: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/26.jpg)
2.3 Drafting scale
Scale 1:100
Long High
Drawn 1 4,5 2,5
Real 100
4.5c
m
2.5cm
![Page 27: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/27.jpg)
2.3 Drafting scale
Scale 1:100
Long High
Drawn 1 4,5 2,5
Real 100 450 250
4.5c
m
2.5cm
![Page 28: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/28.jpg)
2.3 Drafting scale
• Activity: Let’s draw a plan of your classroom using
your feet and your hands applying the suitable scale to draw it
1 foot: 20cm 1 hand: 10cm
![Page 29: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/29.jpg)
feet are equivalent to cm
hands = cm
Hands= cm
Therefore we have
2.3 Drafting scale
hands x 10cm/hand= cm hands x cm/hand= cm
feet x 20cm/foot= cm
feet x 20cm/foot= cm
![Page 30: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/30.jpg)
feet are equivalent to cm
hands = cm
Hands= cm
Therefore we have
2.3 Drafting scale
Long 9 hands x 10cm/hand= 90 cm Wide 7 hands x 10cm/hand= 70 cm Long 32 feet x 20cm/foot=640 cm Wide 23 feet x 20cm/foot=460 cm
![Page 31: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/31.jpg)
2.3 Drafting scale
Which scale could we use to draw the classroom and your desks on your notebooks?
length width
Classroom 620cm 480cm
Desk 72cm 54cm
![Page 32: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/32.jpg)
Classroom Long wide
Drawn 1
Real 100 620 460
Desks Long wide
Drawn 1
Real 100 90 70
2.3 Drafting scale Let’s use the 1:100 scale, so the drawing will be 100 times smaller than reality
![Page 33: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/33.jpg)
2.4 Diedric system 07/12/2011 Drawing exam: Scale, Views and marking
![Page 34: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/34.jpg)
2.4 Diedric system The diedric system represents the objects using a perpendicular projection on a plane
![Page 35: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/35.jpg)
2.4 Diedric system
Where do we have to be situated to see these objects like circles?
![Page 36: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/36.jpg)
2.4 Diedric system
![Page 37: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/37.jpg)
2.4 Diedric system The projection or VIEW consists of drawing just what we see when we are perpendicular to the object and to the plane
Page 28
![Page 38: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/38.jpg)
Floor view
Front view Right Profile view
1
2
4 5
6
Rayo proyectante
3
1
2
3
4 5
6
7
7 8
© Pedro J. Castela
![Page 39: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/39.jpg)
Floor view
Front view Right Profile view
![Page 40: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/40.jpg)
Floor view
Front view
Right Profile view
1
2
7
4 5
6
3
© Pedro J. Castela
![Page 41: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/41.jpg)
Floor view
Front view
Right Profile view
1
2
4 5
6
3
7
© Pedro J. Castela
![Page 42: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/42.jpg)
1
2
4 5 6
3
7
1
2
3
4 5
6
7
8
© Pedro J. Castela Floor view
Front view Right Profile view
![Page 43: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/43.jpg)
2.4 Diedric system To define an object we only need 3 views, floor, front and
profile: Floor view: from the top of the object Front view: facing the object Profile view: from the side
Left Profile view
Floor view
Front view
Front view
Floor view
Left Profile view
![Page 44: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/44.jpg)
2.4 Diedric system IMPORTANT: Follow these rules
The same height: the object has the same height on the floor and on the profile views
The same width: on the front and on the floor views
The same depth: on the floor and on the profile views
![Page 45: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/45.jpg)
2.4 Diedric system
Diedric Rules The front is usually indicated with an arrow The views distribution
The front is always on top of the floor The profile is situated the other way around,
that is, the left profile is situated on the right
front
floor
Left profile Right profile
floor
front
![Page 46: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/46.jpg)
Draw the left profile, floor and front view of your pencil case. Use a 1:4 scale
front
floor
Left profile
![Page 47: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/47.jpg)
Draw the left profile, floor and front view of my tamagochi. Use a 1:4 scale
front
floor
Left profile
![Page 48: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/48.jpg)
2.4 Diedric system
Insert video
![Page 49: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/49.jpg)
2.4 Diedric system
Insert video
![Page 50: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/50.jpg)
2.4 Diedric system
Exercise: Draw the front, left profile and floor views of the class chair
front
floor
Left profile
![Page 51: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/51.jpg)
2.4 Diedric system
Check with your rule that all lines are matched
![Page 52: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/52.jpg)
2.4 Diedric system
Correct with RED color your exercise and copy my picture
![Page 53: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/53.jpg)
2.4 Diedric system Exercise 11: Complete the views of the following objects
Page 31
You have to use Pencil Rules Draw big PICTURES
![Page 54: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/54.jpg)
2.4 Diedric system Exercise 11: Complete the views of the following objects
![Page 55: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/55.jpg)
2.4 Diedric system Exercise 11: Complete the views of the following objects
![Page 56: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/56.jpg)
2.4 Diedric system Exercise 11: Complete the views of the following objects
![Page 57: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/57.jpg)
Vamos a ver cómo se dibujan las vistas de la pieza mostrada en la figura, utilizando un papel cuadriculado (cuadrícula grande), de manera que cada cuadrícula de la pieza equivale a una cuadrícula del papel.
© Pedro J. Castela Haz clic para continuar
2.4 Diedric system
![Page 58: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/58.jpg)
A
B
Para dibujar la vista de alzado nos fijamos en cuánto mide la pieza de ancho (A = 5) y de alto (B = 6) y dibujamos un rectángulo de esas medidas. Sólo tienes que contar los cuadritos.
ALZADO
© Pedro J. Castela Haz clic para continuar
2.4 Diedric system
![Page 59: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/59.jpg)
La cara que tenemos más cerca mide D = 2 cuadros de altura, por tanto trazamos una línea a dos cuadros de la base del rectángulo que contiene a la vista de alzado.
D
A
B
ALZADO
© Pedro J. Castela Haz clic para continuar
2.4 Diedric system
![Page 60: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/60.jpg)
Para terminar la vista de alzado, observa que tanto la rampa como la cara vertical tienen la misma altura (4 cuadros). Sin embargo, la rampa tiene 2 cuadros de ancho y la cara vertical 3.
D
A
B
ALZADO
La cara vertical y la rampa tienen la misma altura.
© Pedro J. Castela Haz clic para continuar
2.4 Diedric system
![Page 61: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/61.jpg)
La vista en planta se sitúa justo debajo de la vista de alzado y en ella vemos la pieza desde arriba. Sus dimensiones serán A = 5 y C = 5, es decir, un cuadrado de 5 x 5.
D
A
B
PLANTA
C
© Pedro J. Castela Haz clic para continuar
2.4 Diedric system
![Page 62: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/62.jpg)
Para dibujar la cara superior observemos que E = 2 cuadros. Por tanto, trazamos una línea paralela a la cara superior del cuadrado que contiene a la vista en planta, a una distancia de 2 cuadros.
D
A
B
PLANTA
E
C
© Pedro J. Castela Haz clic para continuar
2.4 Diedric system
![Page 63: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/63.jpg)
Para dibujar la cara inferior y la rampa observemos que las dos tienen una profundidad de 3 cuadros, pero distinto ancho. Por tanto, trazamos una línea que separe ambas caras, de manera que la rampa tenga 2 cuadros de ancho.
D
A
B
PLANTA
E
C
La cara inferior y la rampa tienen la misma profundidad.
© Pedro J. Castela Haz clic para continuar
2.4 Diedric system
![Page 64: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/64.jpg)
La vista de perfil izquierdo se dibuja a la derecha del alzado, a su misma altura. En principio, dibujamos un rectángulo de altura B = 6 y ancho C = 5 cuadros. Después borraremos las líneas que sobren.
D
A
B
PERFIL IZQUIERDO E
C
C
B
© Pedro J. Castela Haz clic para continuar
![Page 65: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/65.jpg)
Observemos que la cara más cercana tiene forma de L. Por tanto, la dibujamos así, teniendo en cuenta las dimensiones D = 2 y E = 2 cuadros.
D
A
B
PERFIL IZQUIERDO E
C
C
B
E
D
© Pedro J. Castela Haz clic para continuar
2.4 Diedric system
![Page 66: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/66.jpg)
La cara correspondiente a la rampa tiene forma de triángulo rectángulo. Observa que la rampa tiene una altura de 4 cuadros y una profundidad de 3cuadros. Su longitud no importa. Para terminar, borramos las líneas que sobran.
D
A
B
PERFIL IZQUIERDO E
C
C
B
E
D
© Pedro J. Castela Haz clic para continuar
2.4 Diedric system
![Page 67: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/67.jpg)
Este sería el resultado final. La vista de alzado y la vista en planta están en la misma vertical y tienen el mismo ancho (A), mientras que las vistas de alzado y de perfil están en la misma horizontal y tienen la misma altura (B).
© Pedro J. Castela Haz clic para continuar
2.4 Diedric system
![Page 68: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/68.jpg)
2.4 Diedric system Non visible lines: when we know there is a hidden
line we have to draw it using a discontinuous line
hidden line
![Page 69: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/69.jpg)
2.4 Diedric system
Activity: draw the front, floor and right profile views of this figure colouring each face in one colour.
![Page 70: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/70.jpg)
2.4 Diedric system
Activity: draw the front, floor y left profile views of this figure colouring each face in a different colour.
![Page 71: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/71.jpg)
Tabla vistas
Completa Esta tabla
Solución
![Page 72: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/72.jpg)
Ejercicio para casa. 46 y 48 de la página 46 : realiza el perfil derecho, alzado y planta de estas figuras
Ejercicio para casa. 46 y 48
Solución
![Page 73: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/73.jpg)
2.5 Marking and standardizing
Marking is the standard language that engineers use to define the size, materials and properties of an object so that anyone can understand it
![Page 74: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/74.jpg)
2.5 Marking and standardizing 2.- Lines
Measures are in mm, other units are marked The lines are:
Thick continuous lines: are used to outline objects Thick discontinuous lines: indicate hidden lines Thin continuous lines: are used for auxiliary measures and
reference lines. Dots and thin discontinuous lines: indicate a circumference or
cylinder axis
![Page 75: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/75.jpg)
2.5 Marking and standardizing
Measure line
Auxuliary Line
Measure
Circumference axis line
Reference line
![Page 76: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/76.jpg)
Measure line ends
Measures position
2.5 Marking and standardizing
![Page 77: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/77.jpg)
Activity: Draw the front, left profile and floor views of these objects marking the measures. Apply the correct scale
2.5 Marking and standardizing
![Page 78: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/78.jpg)
You have to use a frame
2.5 Marking and standardizing
![Page 79: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/79.jpg)
2.5 Marking and standardizing
The measure lines: We place them parallel to
the edge and slightly separated
They are limited by the auxiliary lines
The arrows are thin and elongated, they go from one side to the other
Marking follows some rules
![Page 80: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/80.jpg)
2.5 Marking and standardizing
Auxiliary lines We place them
perpendicular to the measure lines
They cross the measure line a little bit
They never cut the measure line
![Page 81: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/81.jpg)
2.5 Marking and standardizing The measures:
We indicate the real measure in milimetres, but “mm” is never written
They are placed above the measure line, never under it
We only use the extrictly necessary measures
![Page 82: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/82.jpg)
Solución Tabla vistas
Ejercicio
![Page 83: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/83.jpg)
Ejercicio para casa. 46 y 48
![Page 84: Drawing appied to Technology 1 ESO](https://reader034.fdocuments.net/reader034/viewer/2022042601/547ddb78b4af9fef158b54db/html5/thumbnails/84.jpg)
Ejercicio para casa. 46 y 48
Ejercicio