DPV® API 594 Dual Plate Wafer Check Valves - DELTA PACIFIC
Transcript of DPV® API 594 Dual Plate Wafer Check Valves - DELTA PACIFIC
Page1234567891011 Installation Bolting Data 2" to 2½"12 Installation Bolting Data 2½" to 6"13 Installation Bolting Data 6" to 12"14 Installation Bolting Data 12" to 18"15 Installation Bolting Data 20" to 24"16
DF = Double Flanged 71 = ANSI Class 125 Blank = for Raised Face FlangesL = Lug 72 = ANSI Class 150 R = for Ring Type Joint Flanges
W = Wafer 74 = ANSI Class 300 X = Special;76 = ANSI Class 600 Per Customer's Specifications77 = ANSI Class 90078 = ANSI Class 150079 = ANSI Class 2500
The above example, namely DPV® Fig. W72, shows an ANSI Class 150 Dual Plate Wafer Check Valvefor Installation between ANSI Class 150 Raised Face Flanges.
ANSI Class 2500
ANSI Class 300 ANSI Class 600 ANSI Class 900 ANSI Class 1500
Check Valve Design Features Standard Materials of Construction ANSI Class 150
Body Type
API 594 DUAL PLATE CHECK VALVES
Title
HOW TO ORDER
TABLE OF CONTENTS
Table of Contents Company Introduction
W 72
DELTA PACIFIC VALVE MFG CO1
Standard Terms and Conditions of Sale
End ConnectionsPressure Rating
Consistent product quality and availability of substantial stock makes DPV® a dependable choice for API 594 dual plate check valves where total reliability is of the utmost concern.
DPV® manufactures valves to industry and international standard specifications, or to customer specified requirements, both promptly and economically.
DPV® maintains an extensive quality system which complies with the requirements of major oil companies, industry standards and to the ISO 9000 Standard.
DPV® check valves are manufactured in compliance with the requirements of API 594 and pressure tested in accordance with API 594 (or API 598) standard.
Materials of construction include the ASTM A216 and ASTM A352 range of carbon steels, the ASTM A217 range of alloy steels, and the ASTM A351 and ASTM A890 range of corrosion-resistant steels; the pressure containing components being of high integrity castings.
In concert with customers' continual efforts to both reduce the cost of ownership and comply with local environmental requirements, DPV® check valves incorporate soft plug gaskets as standard for zero leakage from the valve body openings.
DPV® is an internationally registered trademark of D.P.S.I., New York, U.S.A.
Delta Pacific Valve Manufacturing Company
API 594 DUAL PLATE CHECK VALVES
COMPANY INTRODUCTION
DELTA PACIFIC VALVE MFG CO 2
Environmentally Friendly Valves
u Dual Plate Design Minimizes Valve Cracking u Design : API 594 Pressure and Reduces Valve Pressure Drop u Body Wall Thickness : API 594u Spring Loading on Plates Assists Valve Closing u Face-to-Face : API 594 to Ensure Tight Seal and Minimize Slamming u Testing : API 598u Pin Retaining Plugs Fitted with Graphite u For Fitting Flanges to : ASME B16.5 Gaskets for Firesafe and Leak-Free Seal ASME B16.47 Series Au Metal-to-Metal Seating Standard MSS SP-44u Resilient Seat Materials Available Upon Request u Drain Connections Available Upon Request
No.1234202122232425 Gasket (for Pipe Plug)3031
Note: Lug and Double Flanged available upon request.
2"to
14"16"to
24"30"to
48"
DELTA PACIFIC VALVE MFG CO3
Pipe Plug Hinge Pin
Body Plate
CHECK VALVE DESIGN FEATURES
Spring
API 594 DUAL PLATE CHECK VALVES
Typical Construction
Body-Lug Bearing Plate-Lug Bearing Spring Retainer
Eyebolt Nameplate
Stop Pin
Part Name
Horizontal PipelineValve Hinge Pin Perpendicular to Ground
Valve Plates Open Sideways Valve Plates Open UpwardsValve Hinge Pin Parallel to Ground
Vertical Pipeline
Cracking Pressure (psi)
0.15
0.15
0.15 0.60
0.45
0.30
Installation Orientation
Size
Valve
Note: Forged materials may be substituted in lieu of cast materials for the body at DPV®'s option.
Other materials available upon request.
1 2 5 9 10 13 1513Cr 304 HF Ni-Cu 316 Alloy 20 BronzeCA15 CF8 HF M-35-1 CF8M CN7M B6213Cr 304 HF Ni-Cu 316 Alloy 20 B6213Cr 304 HF Ni-Cu 316 Alloy 20 B6213Cr 304 HF Ni-Cu 316 Alloy 20 B6213Cr 304 HF Ni-Cu 316 Alloy 20 B6213Cr 304 HF Ni-Cu 316 Alloy 20 B62
A B C D E F G H I JHF HF HF HF HF HF HF NBR NBR NBR
CF8 CF8 CF8 CF8M CF8M M-35-1 A890 4A CF8 CF8 CF8M13Cr 304 F51 316 F51 Ni-Cu F51 13Cr 304 31613Cr 304 F51 316 F51 Ni-Cu F51 13Cr 304 31613Cr 304 316 316 316 Ni-Cu F51 13Cr 304 31613Cr 304 316 316 316 Ni-Cu F51 13Cr 304 31613Cr 304 316 316 316 Ni-Cu F51 13Cr 304 316
Note: Metal body seating surfaces will be supplied as a weld overlay.
Resilient seating materials will be located in body and bonded to the body seat area.
DELTA PACIFIC VALVE MFG CO 4
Stop Pin Body-Lug Bearing Plate-Lug Bearing Spring Retainer
DPV® Trim No.
Body Seating Surface Plate Hinge Pin
Body-Lug Bearing Plate-Lug Bearing Spring Retainer
Part
Body Seating Surface Plate Hinge Pin Stop Pin
Eyebolt ← Forged Steel →
Trim Materials
PartAPI 594 Trim No.
Spring ← ASTM B637 UNS N07750 → Gasket ← Flexible Graphite →
A890 Gr. 4A Pipe Plug A182 Gr. F304 A182 Gr. F304L A182 Gr. F316 A182 Gr. F316L A182 Gr. F51 Body A351 Gr. CF8 A351 Gr. CF3 A351 Gr. CF8M
PartCorrosion-Resistant Steels
ASME B16.34 Material Group Duplex2.1 2.2 UNS J92205
A351 Gr. CF3M
Gasket ← Flexible Graphite → Eyebolt ← Forged Steel →
Pipe Plug ASTM A105 ASTM A350 Grade LF2 Spring ← ASTM B637 UNS N07750 →
1.3 Body A216 Gr. WCB ASTM A352 Grade LCC ASTM A352 Grade LCB
API 594 DUAL PLATE CHECK VALVES
STANDARD MATERIALS OF CONSTRUCTION
PartASME B16.34 Material Group
Carbon Steel Impact Tested Carbon Steels1.1 1.2
285 psig @ -20 to 100 °F265 psig @ -50 to 100 °F290 psig @ -50 to 100 °F275 psig @ -50 to 100 °F275 psig @ -50 to 100 °F275 psig @ -50 to 100 °F275 psig @ -50 to 100 °F290 psig @ -50 to 100 °F
°F °F °F
(in.) (mm) (in.) (mm) (mm) (mm) (lb.) (kg.)2 50 2 3/8 60 102 56 70 4 2
2 1/2 65 2 5/8 67 121 73 120 7 33 80 2 7/8 73 133 87 190 9 44 100 2 7/8 73 171 108 340 13 66 150 3 7/8 98 219 160 870 31 148 200 5 127 276 210 1650 53 2410 250 5 3/4 146 337 267 2700 86 3912 300 7 1/8 181 406 310 4300 119 5414 350 7 1/4 184 448 356 5950 176 8016 400 7 1/2 191 511 405 8250 258 11718 450 8 203 546 456 10400 304 13820 500 8 5/8 219 603 505 12900 359 16324 600 8 3/4 222 714 605 19900 730 331
DELTA PACIFIC VALVE MFG CO5
Duplex
LCC
Maximum
Working Pressure
20 1/821 1/223 3/428 1/8
10 7/813 1/4
1617 5/8
4 3/45 1/46 3/48 5/8
15 15/1617 15/1619 7/8
23 13/16
8 1/410 1/2
12 3/1614
2 7/83 7/164 1/4
6 5/16
MaterialUNS S31600UNS N06625UNS N07750
Spring
Maximum
LCBWCB
Material
CF8MCF8
CF3MCF3
API 594 DUAL PLATE CHECK VALVES
Installation Dimensions
Body
DPV® Figure NumberW72
ANSI CLASS 150
2 3/16(in.)Outside Ø
4(in.)
Face-to-FaceSize Outlet Inside ØLNominal ØD
WeightCv
250600
1,000
ØD1
Working Temperature
740 psig @ -20 to 100 °F695 psig @ -50 to 100 °F750 psig @ -50 to 100 °F720 psig @ -50 to 100 °F720 psig @ -50 to 100 °F720 psig @ -50 to 100 °F720 psig @ -50 to 100 °F750 psig @ -50 to 100 °F
°F °F °F
(in.) (mm) (in.) (mm) (mm) (mm) (lb.) (kg.)2 50 2 3/8 60 108 59 70 7 3
2 1/2 65 2 5/8 67 127 73 120 9 43 80 2 7/8 73 146 87 190 13 64 100 2 7/8 73 178 108 340 18 86 150 3 7/8 98 248 160 870 40 188 200 5 127 305 210 1650 68 3110 250 5 3/4 146 359 267 2700 112 5112 300 7 1/8 181 419 310 4300 170 7714 350 8 3/4 222 483 356 5950 258 11716 400 9 1/8 232 537 405 8250 419 19018 450 10 3/8 264 594 456 10400 441 20020 500 11 1/2 292 651 505 12900 584 26524 600 12 1/2 318 772 608 19900 904 410
DELTA PACIFIC VALVE MFG CO 6
LCCCF3
CF3MCF8
Working PressureWCBLCB
CF8MDuplex
API 594 DUAL PLATE CHECK VALVES
ANSI CLASS 300
Installation Dimensions DPV® Figure NumberW74
Body MaximumMaterial
Spring MaximumMaterial Working Temperature
UNS S31600 250UNS N06625 600UNS N07750 1,000
Nominal L ØD ØD1Cv
(in.) (in.)
WeightSize Face-to-Face Outside Ø Outlet Inside Ø
4 1/4 2 5/165 2 7/8
5 3/4 3 7/167 4 1/4
9 3/4 6 5/1612 8 1/4
14 1/8 10 1/216 1/2 12 3/16
19 1421 1/8 15 15/16
30 3/8 23 15/16
23 3/8 17 15/1625 5/8 19 7/8
1,480 psig @ -20 to 100 °F1,395 psig @ -50 to 100 °F1,500 psig @ -50 to 100 °F1,440 psig @ -50 to 100 °F1,440 psig @ -50 to 100 °F1,440 psig @ -50 to 100 °F1,440 psig @ -50 to 100 °F1,500 psig @ -50 to 100 °F
°F °F °F
(in.) (mm) (in.) (mm) (mm) (mm) (lb.) (kg.)2 50 2 3/8 60 108 59 70 9 4
2 1/2 65 2 5/8 67 127 73 120 11 53 80 2 7/8 73 146 87 190 18 84 100 3 1/8 79 191 108 340 24 116 150 5 3/8 137 264 162 870 57 268 200 6 1/2 165 318 213 1650 121 5510 250 8 3/8 213 397 267 2600 209 9512 300 9 229 454 313 4300 309 14014 350 10 3/4 273 489 356 5500 492 22316 400 12 305 562 400 7750 794 36018 450 14 1/4 362 610 449 9900 871 39520 500 14 1/2 368 679 500 12300 1,142 51824 600 17 1/4 438 787 600 19300 1,843 836
Working Temperature
WeightCv
250600
1,000
ØD1Face-to-FaceSize Outlet Inside Ø
LNominal ØD
2 5/16(in.)Outside Ø
4 1/4(in.)
API 594 DUAL PLATE CHECK VALVES
Installation Dimensions
Body
DPV® Figure NumberW76
ANSI CLASS 600
LCBWCB
Material
CF8MCF8
CF3MCF3
Spring
Maximum
MaterialUNS S31600UNS N06625UNS N07750
2 7/83 7/164 1/46 3/88 3/810 1/2
12 5/1614
15 3/417 11/1619 11/1623 5/8
55 3/47 1/210 3/812 1/215 5/817 7/819 1/422 1/8
2426 3/4
31
Maximum
Working Pressure
Duplex
LCC
DELTA PACIFIC VALVE MFG CO7
2,220 psig @ -20 to 100 °F2,090 psig @ -50 to 100 °F2,250 psig @ -50 to 100 °F2,160 psig @ -50 to 100 °F2,160 psig @ -50 to 100 °F2,160 psig @ -50 to 100 °F2,160 psig @ -50 to 100 °F2,250 psig @ -50 to 100 °F
°F °F °F
(in.) (mm) (in.) (mm) (mm) (mm) (lb.) (kg.)2 50 2 3/4 70 140 59 70 18 8
2 1/2 65 3 1/4 83 162 73 120 24 113 80 3 1/4 83 165 90 190 31 144 100 4 102 203 108 340 44 206 150 6 1/4 159 286 162 850 93 428 200 8 1/8 206 356 213 1600 185 8410 250 9 1/2 241 432 267 2600 320 14512 300 11 1/2 292 495 313 4300 485 22014 350 14 356 518 356 5500 772 35016 400 15 1/8 384 578 400 7750 1,036 47018 450 17 3/4 451 635 449 9900 1,334 60520 500 17 3/4 451 695 495 12200 1,808 82024 600 19 1/2 495 835 600 19300 2,315 1,05032 7/8 23 5/8
25 17 11/1627 3/8 19 1/2
20 3/8 1422 3/4 15 3/4
17 10 1/219 1/2 12 5/16
11 1/4 6 3/814 8 3/8
6 1/2 3 9/168 4 1/4
5 1/2 2 5/166 3/8 2 7/8
WeightSize Face-to-Face Outside Ø Outlet Inside Ø
UNS N07750 1,000
Nominal L ØD ØD1Cv
(in.) (in.)
UNS S31600 250UNS N06625 600
Spring MaximumMaterial Working Temperature
API 594 DUAL PLATE CHECK VALVES
ANSI CLASS 900
Installation Dimensions DPV® Figure NumberW77
Body MaximumMaterial Working Pressure
WCBLCB
CF8MDuplex
LCCCF3
CF3MCF8
DELTA PACIFIC VALVE MFG CO 8
3,705 psig @ -20 to 100 °F3,480 psig @ -50 to 100 °F3,750 psig @ -50 to 100 °F3,600 psig @ -50 to 100 °F3,600 psig @ -50 to 100 °F3,600 psig @ -50 to 100 °F3,600 psig @ -50 to 100 °F3,750 psig @ -50 to 100 °F
°F °F °F
(in.) (mm) (in.) (mm) (mm) (mm) (lb.) (kg.)2 50 2 3/4 70 140 59 70 18 8
2 1/2 65 3 1/4 83 162 73 120 24 113 80 3 1/4 83 171 90 190 42 194 100 4 102 206 108 340 57 266 150 6 1/4 159 279 162 850 150 688 200 8 1/8 206 349 213 1600 287 13010 250 9 3/4 248 432 267 2600 463 21012 300 12 305 518 313 4300 847 38414 350 14 356 575 356 5500 1,213 55016 400 15 1/8 384 638 400 7750 1,400 635
Working Temperature
WeightCv
250600
1,000
ØD1Face-to-FaceSize Outlet Inside Ø
LNominal ØD
2 5/16(in.)Outside Ø
5 1/2(in.)
API 594 DUAL PLATE CHECK VALVES
Installation Dimensions
Body
DPV® Figure NumberW78
ANSI CLASS 1500
LCBWCB
Material
CF8MCF8
CF3MCF3
Spring
Maximum
MaterialUNS S31600UNS N06625UNS N07750
2 7/83 9/164 1/46 3/88 3/810 1/2
12 5/1614
15 3/4
6 3/86 3/48 1/8
1113 3/4
1720 3/822 5/825 1/8
Maximum
Working Pressure
Duplex
LCC
DELTA PACIFIC VALVE MFG CO9
6,170 psig @ -20 to 100 °F5,805 psig @ -50 to 100 °F6,250 psig @ -50 to 100 °F6,000 psig @ -50 to 100 °F6,000 psig @ -50 to 100 °F6,000 psig @ -50 to 100 °F6,000 psig @ -50 to 100 °F6,250 psig @ -50 to 100 °F
°F °F °F
(in.) (mm) (in.) (mm) (mm) (mm) (lb.) (kg.)2 50 2 3/4 70 143 48 50 22 10
2 1/2 65 3 1/4 83 165 59 80 40 183 80 3 3/8 86 194 68 110 57 264 100 4 1/8 105 232 94 250 88 406 150 6 1/4 159 314 162 850 198 908 200 8 1/8 206 384 186 1300 331 15010 250 10 254 473 232 2100 529 24012 300 12 305 546 271 3250 970 440
18 5/8 9 1/821 1/2 10 11/16
12 3/8 6 3/815 1/8 7 5/16
7 5/8 2 11/169 1/8 3 11/16
5 5/8 1 7/86 1/2 2 5/16
WeightSize Face-to-Face Outside Ø Outlet Inside Ø
UNS N07750 1,000
Nominal L ØD ØD1Cv
(in.) (in.)
UNS S31600 250UNS N06625 600
Spring MaximumMaterial Working Temperature
API 594 DUAL PLATE CHECK VALVES
ANSI CLASS 2500
Installation Dimensions DPV® Figure NumberW79
Body MaximumMaterial Working Pressure
WCBLCB
CF8MDuplex
LCCCF3
CF3MCF8
DELTA PACIFIC VALVE MFG CO 10
u Sizes 2" to 24" Connection Flangesshall conform to ASME B16.5
u Fully Threaded Stud Bolts shall be Used
u Heavy Series Hex Nuts shall be Used
u Spiral Wound Gaskets to ASME B16.20with an approximate CompressedThickness of 1/8" shall be Used
u Ring Type Joint Gaskets to ASME B16.20with an approximate Distance betweenFlanges to ASME B16.5
ANSI(in.) (mm) Class (in.) (mm) (mm) (in.) T.P.I.
146159152171171178222229222229254260159171171191191197248254
1 8900 7 1/2 191 81/4" R.F. 9 3/4
R27 R.T.J. 10
103/48
8 3/4
4 5/8 11
10
9
149
150
300
600
5 1/26 3/4
7 1/2
7 3/4
1500
8 1 81/4" R.F. 10
9
97/88
8 7/8
5/8
5/88
900
6 3/4
7
9
8
2500 6 3/4
6 1/2
6 1/2
R24 R.T.J.
R24 R.T.J.1/4" R.F.
R26 R.T.J.
11
300
600
5 127
127
11
11
R22 R.T.J.121
6 1/4
11 DELTA PACIFIC VALVE MFG CO
2 1/2 65
1/16" R.F. 6 1/4
1/16" R.F.
5/8
R23 R.T.J.
4 3/4
140
165
171
165
5
INSTALLATION BOLTING DATA
Facing
2
1/16" R.F.
1/16" R.F.
1/4" R.F.
1/4" R.F. 8 3/4
150
R23 R.T.J.
DUAL PLATE WAFER CHECK VALVES
ØBD
5 3/4
6
Typical Construction
ValveØBCD
50
SizeQty
6 3/4
1/4" R.F. 7 1/2
R25 R.T.J.
R26 R.T.J.
5 7/8R26 R.T.J.
1495 7/8
8 3/4
10 1/4
BL (Length)(in.)
4
6 3/4
Connection Flange Bolting
ANSI(in.) (mm) Class (in.) (mm) (mm) (in.) T.P.I.
248254286292171184184203203210235241267273318324171184191210235241279286305311368375203216229248318324362368
1/4" R.F. 14 1/4
1/4" R.F. 12 1/2R45 R.T.J.
12 1/214 1/2
318 12
99 3/4
8
8
12 3/4
12
12
1 3/8
10 5/8
11 1/2
270
292
1/16" R.F. 8R43 R.T.J. 8 1/2
12R37 R.T.J. 12 1/41/4" R.F. 14 1/2
9 1/2
10 3/4
241
27314 3/4
1/4" R.F.R27 R.T.J.1/4" R.F.
1/4" R.F.
R38 R.T.J.
R45 R.T.J.1/16" R.F.
R45 R.T.J.
10
(in.)9 3/4
10
DUAL PLATE WAFER CHECK VALVES
INSTALLATION BOLTING DATA
811 1/211 1/4
Size BL (Length)Qty
ØBDConnection Flange
3
168
168 8
7 1/47 1/4
1919 1/2
89 1/4
R31 R.T.J.
1/16" R.F.R29 R.T.J.1/16" R.F.
R31 R.T.J.1/4" R.F.
Facing
3/4
3/4
DELTA PACIFIC VALVE MFG CO
1/4" R.F.
900
203R35 R.T.J.
10 1/28
6 5/8
12
Valve
1/4" R.F.R31 R.T.J. 8 1/4
600
88
8
Bolting
10 3/412 1/212 3/46 3/4
229
191
R37 R.T.J.8
8
8
R32 R.T.J.1/16" R.F.
7 1/2
1/4" R.F.
8
7 1/47 1/2
R36 R.T.J.1/16" R.F.
8 1/49 1/4
8 1/2
200
216
1/4" R.F. 11
7 7/8
9 1/4 235R37 R.T.J. 11 1/4
1/4" R.F.R37 R.T.J. 9 1/2
80
1004900
1500
2500
600
150
300
150
ØBCD
652 1/21500
2500
8 203
229R28 R.T.J.
300
1500
2500
8
89
6 5/8
7 1/2
8
9
116 5/8
1 1/8 8
152
1 1/4
6 3/44
10
9
11
10
8
8
9
8
8
8
10
81506
150
300
600
900
9 1/2 241
8
8
8
8
7/8
1 1/8
1 1/4
5/8
3/4
7/8
1 1/8
1 1/4
1 1/2
3/4
1
1 1/8
ANSI(in.) (mm) Class (in.) (mm) (mm) (in.) T.P.I.
425432508521241254273292368375438438514514597616273279311330438445483489591603743775311318362381457464552559
23 3/4
12 1/4
13
DUAL PLATE WAFER CHECK VALVES
11
13
1/4" R.F.
10 3/4
R56 R.T.J. 12 1/2
R57 R.T.J. 15
DELTA PACIFIC VALVE MFG CO
R54 R.T.J.
1/16" R.F.
17 1/2
19 1/4
R57 R.T.J. 18 1/4
812 2 1/2
12
INSTALLATION BOLTING DATA
R52 R.T.J.
Valve Connection Flange BoltingSize
FacingØBCD BL (Length)
1/4" R.F.
21 1/4 540
362
1/4" R.F.
1/4" R.F.19
R53 R.T.J.
R53 R.T.J.
483
29 1/4
14 1/4
18
21 3/4
30 1/2
8
20 1 1/4
12 7/8 9
8
451
489
16 1 1/8
R57 R.T.J. 22533 20
1/16" R.F.
1/4" R.F.
1/4" R.F.
432
QtyØBD
(in.)
6 1501500
1/4" R.F.
25001/4" R.F.
1 3/8 8R46 R.T.J. 17
12 1/2 31816 3/4
12
2 8R47 R.T.J. 20 1/2
14 1/2 36820
8
8 200
1501/16" R.F.
3001/16" R.F.
6001/4" R.F.
9001/4" R.F.
3/4 10R48 R.T.J. 10
11 3/4 2989 1/2
8
7/8 9R49 R.T.J. 11 1/2
13 33010 3/4
12
1 1/8 8R49 R.T.J. 14 3/4
13 3/4 34914 1/2
12
1 3/8 8R49 R.T.J. 17 1/4
15 1/2 39417 1/4
12
15001/4" R.F.
15 1/2 394R50 R.T.J.
20 1/412 1 5/8 8
20 1/4
25001/4" R.F.
17 1/4 438R51 R.T.J.
23 1/212 2 8
24 1/4
10 250
1501/16" R.F.
600
1500
2500R55 R.T.J.
R53 R.T.J.1/16" R.F.
7/8 9
300 15 1/4 387 16 1 8
14 1/4
12 1/4
8
17 432 16 1 1/417 1/4
19900 18 1/2 470 16
12 1 7/8 823 1/4
12 300
150 17
300 17 3/4
600 19 1/4
900 21 1 3/8 8
8
1 3/8
ANSI(in.) (mm) Class (in.) (mm) (mm) (in.) T.P.I.
686705845622324337406425514521635648768768337343432445565572686692838870362368470483648654781800965997
16 1 1/8
R67 R.T.J. 34 1/414 1/4
1501/16" R.F.
22 3/4 578
8R66 R.T.J.
15001/4" R.F.
27 3/4 70533
16 2 1/2 8
2720
27 1/41 5/8
20 1 1/2 822 1/2
2017 1/2
1 1/4 8
9001/4" R.F.
57217
23 3/4 60322 1/4
22 1/2
24 1/4 616
3001/16" R.F.R65 R.T.J.
6001/4" R.F.
R65 R.T.J.
13 1/416 1 8
13 1/2150
1/16" R.F.21 1/4 540
R64 R.T.J.
30 1/416 2 1/4 8
30 1/41500
1/4" R.F.25 635
R63 R.T.J.
ØBD(in.)
8R62 R.T.J. 25 1/2
8R61 R.T.J.
2520 1 1/2
DELTA PACIFIC VALVE MFG CO 14
Valve Connection Flange BoltingSize
FacingØBCD BL (Length)
Qty
9001/4" R.F.
22 559
20 1/420
20 1/21 3/8
816 3/4
12 3/412
6001/4" R.F.
18 3/4 476
20 3/4 527
R59 R.T.J.
300 20 1/4 5141/16" R.F.R61 R.T.J.
12 2 3/4
13 1/41
1620 1 1/8
824 1/2
1501/16" R.F.
8
22 1/2 572
24 3/8 619
DUAL PLATE WAFER CHECK VALVES
INSTALLATION BOLTING DATA
2716 2 8
27 3/433 1/4
12 3001500
1/4" R.F.R58 R.T.J.
25001/4" R.F.
R60 R.T.J.
8R68 R.T.J. 14 1/2
3001/16" R.F.
24 3/4 62918 1/2
24 1 1/4 8R69 R.T.J. 19
6001/4" R.F.
25 3/4 65425 1/2
20 1 5/8 8R69 R.T.J. 25 3/4
9001/4" R.F.
27 68630 3/4
20 1 7/8
15001/4" R.F.
30 1/2 775 8R71 R.T.J. 39 1/4
8R70 R.T.J. 31 1/2
3816 2 3/4
14 350
16 400
18 450
ANSI(in.) (mm) Class (in.) (mm) (mm) (in.) T.P.I.
381394502521667679800819
1,0731,111400413552578768781933959
1,1751,219
2 1/2 8
1500 39 991 16 3 1/2 8
35 1/2
46 1/4
9001/4" R.F.
R79 R.T.J.1/4" R.F.
30 1/424 1 7/8 8
30 3/4600
1/4" R.F.33 838
R77 R.T.J.
21 3/424 1 1/2 8
22 3/4300
1/16" R.F.32 813
R77 R.T.J.
1 1/4 8R76 R.T.J. 16 1/4
29 1/2 74915 3/4
20
3 8R75 R.T.J. 43 3/4
32 3/4 83242 1/4
16
2 8R74 R.T.J. 32 1/4
29 1/2 74931 1/2
20
1 5/8 8R73 R.T.J. 26 3/4
28 1/2 72426 1/4
24
15001/4" R.F.
1501/16" R.F.
6001/4" R.F.
9001/4" R.F.
1 1/4 8R73 R.T.J. 20 1/2
27 68619 3/4
24
1 1/8 8R72 R.T.J. 15 1/2
25 63515
201501/16" R.F.
3001/16" R.F.
Valve Connection Flange BoltingSize
FacingØBCD BL (Length)
QtyØBD
(in.)
15
DUAL PLATE WAFER CHECK VALVES
37 3/4
48
36 3/4
DELTA PACIFIC VALVE MFG CO
902 20
INSTALLATION BOLTING DATA
R78 R.T.J.
20 500
24 600
CONTROLLING PROVISIONS AND ACCEPTANCEAll DPV sales are expressly subject to these terms and conditions, which govern and prevail regardless of any terms and conditions set forth to the contrary by the Buyer.
The Buyer's acceptance of these terms and conditions is evidenced by the Buyer's placement of order with DPV.
QUOTATIONS AND PRICESAll goods are priced F.O.B. our warehouse. Inland freight to destination is for account of the Buyer, either on collect basis, or prepaid and then billed by DPV for payment
by the Buyer. Unless otherwise stated in writing, all prices are valid for thirty (30) days only. Published prices are subject to changes without prior notice.
DELIVERYDelivery quoted is estimated based on availability of DPV's stock and/or production schedule at time of quotation/order, and is subject to changes in the event of prior
sales and re-scheduling to any occurences beyond the DPV 's control, though DPV, as a gesture of goodwill, will do its best stay as close as possible to the delivery
estimated. Title to the product(s) and risk of loss shall pass to the Buyer upon delivery to a common carrier or Buyer's transport. All claims of loss to the materials in
transit shall be filed by the Buyer directly with the carrier. All claims for shortages, corrections or deductions must be made to DPV within ten (10) days after receipt of
goods.
CANCELLATION AND RETURNAll cancellations and returns, etc., cannot be made without DPV's formal prior consent with a Return Authorization Number (RAN). A cancellation and re-stocking charge
will apply in accordance with DPV's Return Policy, which applies to all returns. Special items are not subject to cancellation or returns.
FORCE MAJEUREDPV is not to be held responsible for any delays in delivery, or defaults in completing an order or contract, due to force majeure such as strikes, work stoppages, fires,
floods, accidents, inability to obtain fuel and transportation means, vendors' delayed deliveries or materials, parts, components, goods, etc., to DPV, acts of God, and/or
any other causes beyond Seller's control.
TAXESAll DPV prices are exclusive of all taxes, which, if applicable under government laws, shall be wholly for the Buyer's account and to be fully paid by the Buyer only. Where
the Buyer is lawfully entitled to exemption from any tax, all necessary documentation must be provided by the Buyer to DPV to effect such exemption. Any taxes,
interests and penalties assessed against DPV on transactions which are otherwise determined as taxable, shall be borne by the Buyer. The term "Taxes" used here shall
include any impost, duty, levy or other charges imposed by any government or agency thereof upon the property, services or parties hereto, but shall not include those
measured by the net income of DPV.
ERRORSAll clerical and computational errors and/or omissions are exempted and are to be corrected by DPV.
LIMITED WARRANTYAll DPV products are guaranteed to the original Buyer only for a one (1) year period from and after the invoice date against defects in material and workmanship under
normal and proper use and service, and not caused or resulting from improper usage or application, improper installation, improper maintenace and repairs, modifications
or alterations, normal wear and tears, corrosion, erosion, or chemical attacks. DPV's obligation under this warranty is limited strictly to repairing or replacing, at it's
election, any parts or products determined by DPV to be defective, or refunding the purchasing price to the original Buyer. DPV shall bear normal surface transportation
cost for shipping the replacements, but shall not bear any losses, damages, installation, re-installation, enginering, or any other costs incurred thereof by the Buyer. The
Uniform Commercial Code (UCC) shall not apply to the sale, nor the Michigan statutes adopting the UCC. This warranty is expressly made in lieu of and excludes all
other warranties, guarantees, or representations expressed or implied. There are no implied warranties of merchantibility or fitness for a particular purpose.
EXCLUSIONSDo not use DPV products in aircraft or aerospace applications. No warranties, guarantees or representations of any kind are made with respect to such applications. The
Buyer assumes on their own all risks of any use in such applications and will indemnify and hold harmless DPV against and from any claims, costs (including attorney's
fees) and liabilities arising out of such use.
LIABILITYNotwithstanding any provision in the Buyer's order or elsewhere to the contrary, under no circumstances shall DPV be liable for any direct, indirect, special, consequential
or incidental damages (including but not limited to loss of revenue, loss of use, material, production or end products), or any other claims for damages arising out of the
purchase, delivery, installation or use of DPV products, whether claimed in contract, warranty, tort (including negligence) and delays, actual or imputed, or otherwise.
GOVERNING LAWThe contract shall be governed by, construed, and enforced in accordance with the laws of the State of New York in the United States of America. The provisions of the
"UN Convention on Contracts for the International Sale of Goods" shall not apply.
PARTIESThe abbreviaiton "DPV" referes to Delta Pacific Valve Mfg. Co., and the word "Buyer" refers to the Person, Party or Company purchasing goods and/or services from
Delta Pacific Valve Mfg. Co. (DPV).
DELTA PACIFIC VALVE MFG CO 16
DUAL PLATE WAFER CHECK VALVES
STANDARD TERMS AND CONDITIONS OF SALE
API 6D / BS 5351 Floating Ball Valves API 6D Trunnion Mounted Ball ValvesFire Tested & Certified to API 6FA & BS 6755 Pt. 2 Forged Steel, 3-Piece Bolted Body Design1-Pce & 2-Pce Body Design, Full & Reduced Bore ANSI Cl.150 to 2500, Full & Reduced BoreANSI Class 150 & 300, ½" to 12", WCB/LCC/CF8M Available in A105, LF2 and other Materials
API 609 Butterfly Valves, Wafer & Lug Body API 600 Cast Steel ValvesCategory A Concentric Disc and Seat Design Wedge Gate, Globe & Swing Check ValvesCategory B Eccentric Disc and Offset Seat ANSI Class 150 to 2500, 2" to 36"200 psi, ANSI Class 150 & 300, 2" to 24" Available in WCB, LCC and CF8M
Industrial Ball Valves - Investment Cast Industrial Strainers1-Piece, 2-Piece and 3-Piece Body Designs Y and Basket (Simplex & Duplex) TypesFull & Reduced Bore, NPT/SW/BW Ends ANSI Class 150 to 1500, ¼" to 16"ANSI Class 150 to 800, ½" to 4", WCB & CF8M Available in Cast Iron, Bronze, WCB & CF8M
Multi-Function Control Check Valves Pump Suction DiffusersY-Pattern Body, Cast & Ductile Iron, 2" to 14" Cast Iron and Ductile Iron MaterialsANSI Class 125, 150 & 300, Flanged Ends ANSI Class 125, 150 & 300, Flanged Ends
Distributed by:
Printed in U.S.A. Catalog# WCHK01 ©2006 All rights reserved by Delta Pacific Valve Mfg. Co., NY, U.S.A.
Tel: 44 (1638) 606 226 • Fax: 44 (1638) 606 227 • Email: [email protected] CB8 7SH, England, U.K.
10 Victoria Way, Studlands Park Industrial EstateDELTA PACIFIC MFG. LTD.
Corporate Head Office
DELTA PACIFIC VALVE MFG. CO.400 Oser Avenue, Unit 400
Hauppauge, New York 11788-3661 U.S.A.Tel: 1 (631) 231 1261 • Fax: 1 (631) 231 1794 • Email: [email protected]
OTHER PRODUCTS
England