Download, Install, License, and Update AutoPIPE Vessel V8i 33.01.00.11

Log onto the Bentley Web Site

Open internet explorer web site http://selectservices.bentley.com/en-US/

1. Select “Software Downloads”

2. Log into web site. If you do not have a current log, in please contact your local Bentley site administrator who can assist you with the correct information and permissions.

Download AutoPIPE Vessel 1. In the “Search By:” area, Select radio button next to “Product”, and select “AutoPIPE Products”

from drop down list

2. In the “Filter By” area, “Files Posted within last”, change from “6 months” to “ALL”.

3. Press the “Search” button at the bottom of the web site

4. Select the version of AutoPIPE Vessel to download. Place a check in the box next to the name and confirm that any dependencies have also been selected (Bentley IEG).

Note: The following screen shot may show different versions then currently available, but the steps to download are the same. Select a version to download. If you do not see check box next to the applications, you do not have download rights. Contact Bentley BRC or your account manager to discuss your options.

Note: Far right column notifies you of the OS for which the application is certified on. Installing the application on any other OS will be at your own risk and will not be supported

5. Scroll to the bottom of the web page, press “Continue” button located in the bottom right corner.

6. Select Delivery method, Default Download, you can chose Download or Burn CD (an official CD will be mailed). Press “Continue” button

7. Download Procedure Read the Legal Terms of Use statement. If you agree, press the “Accept” button. Then press the “Advanced Download Manager” button. Provide pathname to download the file to and finally press the “Start Download” button. Note: Sometimes users are unable to download software from Bentley SELECTservices website by clicking on the link ‘Download’. Here are the steps which should help:

1. Turn off a pop-up blocker in Internet Explorer by going to Tools -> Pop-up Blocker -> Turn Off Pop-up Blocker

2. Add www.bentley.com to Trusted Sites in IE by going to Tools -> Internet Options -> Security -> Trusted Sites -> Sites

3. Change a security level for this webpage to Low in IE by going to Tools -> Internet Options -> Security -> Trusted Sites -> Custom level… and change drop down list to Low.

8. Burn CD Procedure Select the “Continue” button, provide shipping information, and press the “Complete” button.

Other applications required to complete an installation:

1. Select Server V8 XM

2. Bentley IEG (only required for XM licensed applications that do not support trust licensing)

Download AutoPIPE Vessel Updates

AutoPIPE Vessel updates are created as needed. Notification of these updates are included in a Bentley Press release or Newsletter which is sent to those who have signed up to receive Select Newstream for Plant products. To subscribe / unsubscribe to Newstreams, 1. Visit https://login.bentley.com/personalinfo/index.cfm

2. Log onto the web site.

3. Click on “Tell us more about you”, link near the bottom of the page.

4. Select the “Newsletters” Tab at the top of the page

Place a check in the box next to “NewsStream for Plant”, “NewsStream for Building” and “Press Releases”

5. Press “Submit” button.

Otherwise, it is the end users responsibility to periodically check the following location for product updates

Use the instructions above to log on the Bentley web site and navigate to the Support Download web page.

1.In the Search By area, Select radio button next to “Product”, and select “AutoPIPE Products” from drop down list

2. In the Filter By section, change "Download Category" to "Enhancements and Updates", and “Files Posted within last” to “ALL”

3. Press the “Search” button at the bottom of the web site

4. Place a check in the box next to the name and confirm that any dependencies have also been selected.

5. Press “Continue” button

6. Select Delivery method, Default Download, you can chose Down load or Burn CD (an official CD will be mailed). Press “Continue” button

7. Download Procedure Read the Legal Terms of Use statement. If you agree, press the “Accept” button. Then press the “Advanced Download Manager” button. Provide pathname to download the file to and finally press the “Start Download” button.

8. Burn CD Procedure Select the “Continue” button, provide shipping information, and press the “Complete” button.

Install AutoPIPE Vessel V8i 9.3.x.x

Note: For those installing the application on Win 7 please see item #4 in this section below before continuing,

1. This procedure assumes that Select Server XM has been install and configured, If not please contact the license group to assist you.

2. Must log onto user’s computer with full Administration rights.

3. Install AutoPIPE Vessel V8i while accepting all the default settings.

a. Prefer that the application is not installed over a network connection; suggest that the EXE file is on the users system before starting the installation.

NOTE: If you have already installed AutoPIPE Vessel, completely uninstall all previous versions before proceeding.

b. Navigate to the EXE file download using the procedure above.

c. Double click on it to start the installation process.

If not already installed:

Ultimately the following is displayed:

d. Finished, with AutoPIPE Vessel install, continue with next section before starting the application.

Install AutoPIPE Vessel updates

If updates were available, install AutoPIPE Vessel updates using the procedure located in the update files. Please continue with next section before starting the application.

a. After installation, the computer should be rebooted.

Set-up License

There are two methods for License activation: automatically with the Product Activation Wizard, or manually using License Management Tool.

Method #1: Automatically with the Product Activation Wizard

The following screen is automatically displayed after AutoPIPE Vessel is installed:

a. Choose the correct Setting and press Next

b. Enter the correct Site Activation Key and press the Test Connection button, the Sever and Activation key should be verified, before continuing.

c. Select a country and Press the Next button

d. Verify the settings are correct and press the Finish Button:

e. If all they settings were correct the following is displayed:

Method #2: Manually using License Management Tool (LMT) a. The following screen is automatically displayed after AutoPIPE Vessel is installed:

Press the Cancel button.

b. Open License Management Tool:

Select the Start Button> Program> Bentley Engineering> AutoPIPE Vessel > License Management Tool.

c. After the application is opened, select Tools> Options> enter the correct Server Name and

Site Activation Key, then press the Test Connection button, the Sever and Activation key should be verified, before continuing.

d. Verify AutoPIPE Vessel is listed and 1 license is available.

Start the Program - AutoPIPE Vessel

Start the program by selecting the desktop Icon:

OR,

Select the Start Button> Program> Bentley Engineering> AutoPIPE Vessel > AutoPIPE Vessel.

If everything was correctly installed and licensed the following should be displayed, select a valid license option and press OK button to use the program:

Contact Bentley License Team

If your application is not licensed correctly due to License Management Tool issues, please contact the Bentley License department to verify your account status.

US - (800) 778-4277, opt 1, opt 2

Europe, Middle East, and Africa (+31) 023 5560555

Asia-Pacific +61 3 9697 8637

Troubleshooting:

1. If revert to demo,

a. Verify license is correctly displayed in LMT. Note, in LMT press F5 to refresh the listing.

b. Verify the internet connection and server connection.

c. Verify Select Server XM Dashboard Settings (i.e. Application restrictions, user restrictions, etc...) http://selectserver.bentley.com/bss/admin/

2. The following is displayed:

Answer: The program is in Demo Mode, correctly license the application as described above.