Don Red Ding Com Instructions

download Don Red Ding Com Instructions

of 12

Transcript of Don Red Ding Com Instructions

  • 8/9/2019 Don Red Ding Com Instructions

    1/12

    11/28/09 UpdateTopbacking up my main address fileBLOG Instructionsblog template inside the tagChange Host PC Access CodeEmbed a Blog:embedding Smugmug SlideshowFinePrintfilter TagMac Mac network and vistaNikon load from camera and send to Smugmug and (later) facebook

    (Not on this page, must go to link)New Instructions in PDF -Linda use this-click hereOld Instructions in html -Linda ignore

    Rename.exesend up videos? with Star Explorerstretch your homepagetoday.pdupdates for Upper Roomview only the content that was delivered securlyvista computers on home workgroupsmugmug Wide galleries

    Star address

    Mac network and vista

    Rename USING Rename.exe and PicasoRenamining or renumbering photos

    1. Put in order with Picasa

    2. just move around to where I want.1. select all2. then rename in bactch3. Used make album but for some rason did not work well4. It is a good way to get al names where I want but the rename wassssx not too good

    3. Use the new prograsm called "F:\Program Files\rename\rename.exe"1. set to no sort2. $$$ equals digits at end3. Leave chage blank4. then fill in the chage to with the new prefix5. remove nu,mber divider so will be nothing6. cannot use time in name and that is too bad

    Thunderbird Mail Sort# re: Call For Help - Thunderbird resets my sort order 6/19/2008 3:41 AM Aalok Karnik You know what. I had the exact same error in Thunderbird 2.0.0.14 (and its reallyannoying). Here's what I did to make it go away. I am not sure if this is a fix in the true sense but it works.

    1. click on the inbox A2. the email list seems sorted in the wrong order (oldest first)3. change the sort order to group sort (View -> Sort By -> Grouped by Sort)4. change the sort order to unthreaded (View -> Sort By -> Unthreaded)5. click on the date column to make it sort the right way (newest emails first)6. click on another folder (saay inbox B)7. click on inbox A . .. and the sort order seems to persist (somehow !!!)

    ... hope this helps !

    BLOG Instructions

    -------- Original Message --------

    Sure Bill we can talk. I think you already worked through this but the notes might help.See my answers to your questions in your email below.If you do not have little pictures here, this is no good for you. I hope the images are here.

    I want to come over and work with you on your computer. We could do at my house but I believe it would be better for you to be learning on yourcomputer as we talk. There are lots of gadgets that can be added but you will not need (many of) them , but it will be something new aboutcomputers you can learn.

    1>First go to this link which I set up for you to practice (looks like you have already been there, good)http://funforbill.blogspot.com/

    2>Try to sign in, in upper right hand side

    Subject:[Fwd: Blogs]Date:Sun, 14 Jun 2009 03:59:15 -0400

    From:[email protected]:Bill Spier

    Page 1 of 12instructions

    5/19/2010http://donredding.com/instructions.htmlPDF created with pdfFactory Pro trial version www.pdffactory.com

    http://funforbill.blogspot.com/mailto:[email protected]:[email protected]:%[email protected]%3Ehttp://donredding.com/instructions.htmlhttp://www.pdffactory.com/http://www.pdffactory.com/http://donredding.com/instructions.htmlmailto:%[email protected]%3Emailto:[email protected]://funforbill.blogspot.com/
  • 8/9/2019 Don Red Ding Com Instructions

    2/12

    2.1>It will ask you to signin to google and the blog, maybe not in this oder. Any way for both username(email) isxxxxxx.gmailandpassword is xxxxxxx

    2.2>

    with username ofoursecondhelping.gmail

    and a password ofbuick2212

    2.3>select "view Blog" of FUN FOR BILL blog

    3>Please change template from the hot pink to another, ie select another template (the whole background and arrangement of the blog) as now used to something else. Clickon "customize" (up to right)Select "Customize"

    Page 2 of 12instructions

    5/19/2010http://donredding.com/instructions.htmlPDF created with pdfFactory Pro trial version www.pdffactory.com

    http://donredding.com/instructions.htmlhttp://www.pdffactory.com/http://www.pdffactory.com/http://donredding.com/instructions.html
  • 8/9/2019 Don Red Ding Com Instructions

    3/12

    3.1> and then select "pick new template"

    " (over on left middle).3.2>Select another template, then click to save and then to view blog

    4> Click View Blog

    4>Now, how about making / click on "New Post" -

    6>Write something

    7> "Publish" new post

    Page 3 of 12instructions

    5/19/2010http://donredding.com/instructions.htmlPDF created with pdfFactory Pro trial version www.pdffactory.com

    http://donredding.com/instructions.htmlhttp://www.pdffactory.com/http://www.pdffactory.com/http://donredding.com/instructions.html
  • 8/9/2019 Don Red Ding Com Instructions

    4/12

    8>View Blog

    9>Edit Blog, click on pencil

    10>Type something, then "Publish," then view

    11> Now do another new post and tell me something . .goto #4 above ....

    Let me know if you do all this ok or what questions you have.

    -------- Original Message --------

    Don,

    Can we set up a time for you to walk me through "blogging"? (Ok, when could I come over to your house next week?)

    In the meantime, a few questions come to mind (which will show my ignorance about this whole process).....when someone wants to leave a blog, doeshe/she first establish a Google blog account? Does Google maintain a list of "blogspots", a directory of sorts for someone looking for this web site? NO, a

    Subject:BlogsDate:Sat, 13 Jun 2009 16:54:29 EDT

    From:[email protected]:[email protected]

    Page 4 of 12instructions

    5/19/2010http://donredding.com/instructions.htmlPDF created with pdfFactory Pro trial version www.pdffactory.com

    mailto:[email protected]:[email protected]:[email protected]:[email protected]://donredding.com/instructions.htmlhttp://www.pdffactory.com/http://www.pdffactory.com/http://donredding.com/instructions.htmlmailto:[email protected]:[email protected]
  • 8/9/2019 Don Red Ding Com Instructions

    5/12

    person can leave a "Comment" which you can look at and ok, then it shows up. This is not like twitter or facebook which is a lot of interaction. See mycomment on the blog that we are playing with at http://funforbill.blogspot.com/

    You type, then click "Post Comment"

    then get back to blog page by clicking "Home"

    -----------------------------------Bill's latest email and questions:

    Will I be able to edit/delete/add pictures without affecting them on Smugmug? Yes, you can add your own pictures direct from your computer or link toany picture on Smugmug even if you did not send up the picture to Smugmug.. I usually use links to smugmug but one can have the pictures onthe blog itself. Here is the screen for pictures. It is found in "Customize" then "Add agadget" then "Pictures"

    The link line above is where someone will goto if they click the picture, the image can be from your computer or any http address (meaning fromthe web)such as http://donredding.smugmug.com/gallery/3086320_jhVyQ/1/479350409_7iHcz/Large

    What do you think about having a small sign on my truck each Saturday morning while collecting food that says something like "Now you can blog us atwww.oursecondhelping.blogspot.com"? I think that is fine. I do envision it being your main website

    This is really going to be fun once I get the hang of it. Many thanks again for setting it up. Well, it will let you (and me for as long as you want ) do entries

    Page 5 of 12instructions

    5/19/2010http://donredding.com/instructions.htmlPDF created with pdfFactory Pro trial version www.pdffactory.com

    http://funforbill.blogspot.com/http://donredding.smugmug.com/gallery/3086320_jhVyQ/1/479350409_7iHcz/Largehttp://www.oursecondhelping.blogspot.com/http://donredding.com/instructions.htmlhttp://www.pdffactory.com/http://www.pdffactory.com/http://donredding.com/instructions.htmlhttp://www.oursecondhelping.blogspot.com/http://donredding.smugmug.com/gallery/3086320_jhVyQ/1/479350409_7iHcz/Largehttp://funforbill.blogspot.com/
  • 8/9/2019 Don Red Ding Com Instructions

    6/12

    without a cost though the name is sure long now as www.oursecondhelping.blogspot.com. I just could not get the name I know we would prefer.

    I want to come over and work with you on your computer. We could do at my house but I believe it would be better for you to be learning on yourcomputer as we talk. There are lots of gadgets that can be added but you will not need (many of) them , but it will be something new aboutcomputers you can learn. Here is the one I have for our Bible Study group. I have just obtained permission to link to the Churchhttp://www.mpumc.org/church-life/content-page.cfm/min_id/93/min_cont_id/301Please look at it and notice the slideshow and pictures and links and labels and readings and archives.

    Where are you by the way this Sunday morning?

    don

    Bill

    Hi Bill

    Bet you are busy right now with your Second Helping collections. I have spent the Saturday morning on Second Helping too.

    I have been thinking about fixing a web site so you can work with it and I have designed a blog for your consideration for the 2010 season using the Googlefree Blog service.

    I have a number of Blogs and enjoyed learning about them. They are easy to work with, much more so that Powweb and you might even enjoy playing withit.

    Our email address is [email protected] is the free mail service by Google. Our pass word is buick2212. To sign in to the blog you have to use an email address so I made the one and usedgmail.

    I tried to get the blog address to include secondhelping, asecondhelping, thesecondhelping but all were taken so I ended up with oursecondhelping as inhttp://oursecondhelping.blogspot.com/. If we do not llke it we of course do not have to use it but none of those I mentioned are available.

    I have used a template which makes the page look much like the one http://www.secondhelping.us/but we/you can play with many others to get the lookand feel you want. To get to the templates you would go to customize and then templates.

    I have added a slideshow and a few other things which we can remove if you want. I have an entry on the blog with notes similar to these telling what I amdoing so you might want to check that out. We can remove that later. Find at bottom of the blog page.

    Also, I created a blog for us to experiment with and we will not worry if one of us messes up something so feel free to test it.It is at http://funforbill.blogspot.com/You will have to sign in withoursecondhelping.gmail

    and password of buick2212, all small letters.

    Have fun Bill and we will talk later.

    don6/6/09--------------------------------

    Here is some inf from both the blogs

    >From http://oursecondhelping.blogspot.com/This will be removed later or "hidden"Here is what I have done: to set up a new blog at http://oursecondhelping.blogspot.com/1> Since it is easy to set up a blog, I have done so to make it easy for Bill to edit (also, right now)2> There is no cost for this3>I wanted to set up blog address as http://secondhelping.blogspot.com/or http://asecondhelping.blogspot.com/but they were notavaiable. http://oursecondhelping.blogspot.com/was available so I took it.4> The title when one opens the Blog is A Second Helping but that has nothing to do with the http address.5> I tested this on my blog account and then realized my whole piurpose was to have it so Bill could help if he wanted . I rememberedwith Julie when I did this that the blog address I used would not be avaiable for 90 days BUT it has changed now and I was able to set

    up new account using ourhelpinghands, etc6>I was able to get the slideshow working off Smugmug with the code I used earlier at church.7> I am unable now to figure out how to delete the http://somesecondhelping.blogspot.com/I set up to do the transfer. I will do thatlater.8> to edit the account use the email address and a password.9> In the profile I am a team member , I am not sure what that is but I need to figure that out and maybe move.10> In the Profile for team member "don" I notice for some of the links that they are needing another password to enter so that is fine11> the Template may be changed very easily, go to customize, then to "Pick new template" and play around with various ones. Theone I picked seemed to let me make it look more like the original site, though there is nothing sacred about that one.12> I will save (export) this blog so if we mess up we will not lose all the work.Posted by Our Second Helping at 1:25 AM 0 comments-----------------------------

    Page 6 of 12instructions

    5/19/2010http://donredding.com/instructions.htmlPDF created with pdfFactory Pro trial version www.pdffactory.com

    http://www.oursecondhelping.blogspot.com/http://www.mpumc.org/churchmailto:[email protected]://oursecondhelping.blogspot.com/http://www.secondhelping.us/http://funforbill.blogspot.com/http://oursecondhelping.blogspot.com/http://oursecondhelping.blogspot.com/http://secondhelping.blogspot.com/http://asecondhelping.blogspot.com/http://oursecondhelping.blogspot.com/http://somesecondhelping.blogspot.com/http://donredding.com/instructions.htmlhttp://www.pdffactory.com/http://www.pdffactory.com/http://donredding.com/instructions.htmlhttp://somesecondhelping.blogspot.com/http://oursecondhelping.blogspot.com/http://asecondhelping.blogspot.com/http://secondhelping.blogspot.com/http://oursecondhelping.blogspot.com/http://oursecondhelping.blogspot.com/http://funforbill.blogspot.com/http://www.secondhelping.us/http://oursecondhelping.blogspot.com/mailto:[email protected]://www.mpumc.org/churchhttp://www.oursecondhelping.blogspot.com/
  • 8/9/2019 Don Red Ding Com Instructions

    7/12

    From http://funforbill.blogspot.com/

    Bill, after you sign in (upper right screen) I bet one of the first things you will want to do is change this Pink template. To change template click on customize (up to right) andthen select change template (over on left middle). Why not do that now. then edit this entry some.

    Toedit any entry, find the litle pencil at the bottomand click on it. See if you can edit this line right now

    The entries are sorted by date and time with the most recent late. You can adjust that however by clicking on "post options" in the box where you are typing or editing a newentry. "post options" may be found on the lower left side of the box you use to make the entry. See if you can change this posting date to June 1, 2009

    Also, you will want to know what labels are. You ADD them to make it easier to find some particular subject though we probably will not have much use for that. Anyway

    notice below this entry the label for "instructions" Click on it and see what happens.

    You can add a title to each entry. If you leave it blank it picks up the first line as t itle for archives listing over to the right but puts date in as title above

    Also maybe when in edit, run the spell checker and correct my errors, thanks.

    Now whay not creeat a new entry. I will be checking on you!

    ---------

    ../../AppData/Local/Temp/moz-screenshot.jpg (missing 7/3/09)

    Step 1: Add the following line to your blog template inside the tag (copy-paste should work) To Top

    #noprint {display: none;}

    // Hide unwanted elements

    body {background:fff; color:000;}

    // Black text on White background

    a {text-decoration: underline; color:00f;}

    //Underline Hyperlinks in blue

    }

    Step 2: Identify all the areas (or HTML elements) in your blog template that you want to hide in the printer friendly version, ie the sections that you don't want to appear in theprint copy. Enclose them under .. tags. I will show you an example below:

    Lets say our HTML is something like:

    How do I run FinePrint? To Top

    FinePrint is a printer driver and is selected as the printer from your application.See Feature Tour>>

    Can I change the size of fonts?

    Font sizes are limited by the amount of free margin. You can reduce the amount of margin in the Margin control by setting it to "none". If you are using a browser, you canturn off the printing of the URL in the Page Setup dialog box in your browser. This may help increase the amount of available margin.

    Page 7 of 12instructions

    5/19/2010http://donredding.com/instructions.htmlPDF created with pdfFactory Pro trial version www.pdffactory.com

    http://funforbill.blogspot.com/http://donredding.com/instructions.htmlhttp://www.pdffactory.com/http://www.pdffactory.com/http://donredding.com/instructions.htmlhttp://funforbill.blogspot.com/
  • 8/9/2019 Don Red Ding Com Instructions

    8/12

    Why are the top and bottom margins so big in booklet and 2 up mode?

    This is due to the difference in aspect ratio between a full sheet of letter paper and a half sheet. A half sheet of letter paper is taller with respect to its width than a full sizesheet. This leads to more space vertically. To get around the problem, you can use the "FinePrint 2up letter" size paper which can be selected in either the FinePrint Propertiesor in the Page Setup of your application if FinePrint is the selected printer.

    Why are my printouts cut off on the r ight hand side when printing web pages?

    This problem can usually be fixed by reducing the margins from the Page Setup dialog box of your browser.

    Why do I experience slow printing when using FinePrint?

    Try uninstalling all printers and then reinstalling them, testing with FinePrint after each installation. This should solve the problem.

    Set up so LSMxp (and my XP) can access vista with password of xxxxxx. I was unable to remember my password so I changed it by clicking the system icon on right andchange password then forgot password. I cannot imagine I did not have this info somewhere I am addhng to my password keeper on w98To Top

    Change Host PC Access Code

    To Top

    You will be required to change your access code anytime you disable One-Time-Passwords or RADIUS. In addition if you are a GoToMyPC Pro or Corporate account user,your administrator may require you to change your access code on a regular basis.

    GoToMyPC Security Tutorial

    To change your host PC access code:

    1. Go to the host PC whose access code you want to change.

    2. Make sure that the GoToMyPC service is running (look for icon in the system tray).

    3. Right-click on the GoToMyPC icon in the system tray and select Change Access Code.

    4. Enter your oldAccess Code.

    5. Enter your new Access Code.

    6. Re-enter your new Access Code to confirm.

    7. Click OK.

    There is a tag column as well, you can show this by clicking on the little box at the right-hand end of the column headers and selecting "Tag".

    To Top

    Satr

    How do I get StarExplorer to send up videos?

    Don,

    if they are currently rejected by S*E, go to Tools|Options, Upload and

    enable Video and make sure video extension you need is on the list.

    Depending on the typical size you may also need to drastically

    increase the timeout or switch to "no-wait" mode when uploading large

    videos.HTH

    Nikolai

    On Mon, Jun 8, 2009 at 12:39 PM, donRedding wrote:

    > Sorry, I asked this once before but forget. How do I get it to send up

    > videos?

    >

    > thanks

    >

    > don

    view only the content that was delivered securly To Top

    Page 8 of 12instructions

    5/19/2010http://donredding.com/instructions.htmlPDF created with pdfFactory Pro trial version www.pdffactory.com

    mailto:donRedding%[email protected]%3Ehttp://donredding.com/instructions.htmlhttp://www.pdffactory.com/http://www.pdffactory.com/http://donredding.com/instructions.htmlmailto:donRedding%[email protected]%3E
  • 8/9/2019 Don Red Ding Com Instructions

    9/12

    To download the content a user would now have to c lick on theNo button. As we know, most people using the web only scan text and avoid reading it if at all possible! They

    will usually go for the Yes button if there is not an OKbutton.

    Some sites are going to find that their secure pages in IE 8 have the following problems:

    l Any non-secure HTTP image beacons used for analytics data gathering will often be ignoredl The page may not display or even work correctly if it relies on non-secure images, CSS or Javascript

    Therefore, avoiding mixed content on HTTPS pages is even more important now that IE 8 has been released. It often becomes an issue when using third party services such asanalytics or Content Delivery Networks (CDN). For example, we avoided the use of Google hosted Ajax libraries on our site until Google added HTTPS support.

    As mention in the previous blog post, an IE user you can disable this warning by:

    1. Going to Tools->Internet Options->Security2. Select the Security tab3. Click the Custom Level button4. In the Miscellaneous section change Display mixed content to Enable

    To Top

    Instructions for backing up my main address file To Top1> which is in Acess2>and is on the 5695 d drive at d:\data_5695|Data_access3> and in file called address5695.mdb4> Use the usb HP Personal Media Drive5>Ok to use cables I use for the Maxtors6.> be sure network ok from Vista to 5695 and7> Connect HPPMD to Vista is way I did 6/10/088> On Vista open 5695 to the d:\data_5695|Data_access/address5695.mdb9>On the HPPMD directory of "5695 only access address file" first rename the previous backup file.10> Then copy the new file. I note 307,308 size did not change from 12/04/2006 old one of address5695.old.mdb11> Update these instructions12> Probably should do this backup at least quarterly and I will put on to Yahoo

    stretch your homepage To TopHi Don,

    Try adding this to your CSS box:

    .homepage #homepage {margin-left: 15px;margin-right: 15px;min-width: 755px;width: auto;_width: expression(document.documentElement.clientWidth < 790? "760px" : "auto");}

    That will stretch your homepage. I hope this helps, Don. Please let us know if you need anything else!

    Take care,WendeeSupport Hero

    Re: cannot get to vista computers on home workgroup To TopPosted: 12-26-2008, 07:29 PMHiMaybe this can Help, successful Sharing involves some general considerationin Network settings, http://www.ezlan.net/sharing.htmlAs well as specific adjustment of each computer according to what it isallowed to be shared.Vista File and Printer Sharing-http://technet.microsoft.com/en-us/l.../bb727037.aspxWindows XP File Sharing -http://support.microsoft.com/default...b;en-us;304040Printer Sharing XP -http://www.microsoft.com/windowsxp/u...utt_july2.mspxWindows Native Firewall setting for Sharing XP -http://support.microsoft.com/kb/875357Windows XP patch for Sharing with Vista -

    Page 9 of 12instructions

    5/19/2010http://donredding.com/instructions.htmlPDF created with pdfFactory Pro trial version www.pdffactory.com

    http://www.ezlan.net/sharing.htmlhttp://technet.microsoft.com/enhttp://support.microsoft.com/default...b;enhttp://www.microsoft.com/windowsxp/u...utt_july2.mspxhttp://support.microsoft.com/kb/875357http://donredding.com/instructions.htmlhttp://www.pdffactory.com/http://www.pdffactory.com/http://donredding.com/instructions.htmlhttp://support.microsoft.com/kb/875357http://www.microsoft.com/windowsxp/u...utt_july2.mspxhttp://support.microsoft.com/default...b;enhttp://technet.microsoft.com/enhttp://www.ezlan.net/sharing.html
  • 8/9/2019 Don Red Ding Com Instructions

    10/12

    http://support.microsoft.com/kb/922120Jack (MVP-Networking).

    To Top

    Instructions for stretching Smugmug Home pages, etc To Top

    Hi Don, here's how: http://www.dgrin.com/showthread.php?t=93221Ask any questions there in that thread on Dgrin, thanks!

    I hope this helps! Please holler back if you have more questions, I or our team will be here for you!

    All the best,

    AndyCOO & House ProfessionalSmugMugwww.moonriverphotography.com

    Christine, this is for youInstructions for embedding Smugmug Slideshow: To Top

    Below is the code I am using on some of my pages such as :http://donreddingsrunc1959.blogspot.com/

    Enter the above code and replace theAlbumID andAlbumKey references with the ones from your smugmug gallery

    Change the URL ( so when one clicks on it, they go to your smugmug pages, if you do not want this I can figure out how to stop it.) (This i

    don

    5/22/09

    3:50 pm

    Instructions on How to Embed a Blog: To Top

    >

    >1. Open up a blog by going to www.blogger.com

    >

    >2. In the section you want to edit click the button in the upper

    >left hand corner labeled "Source." This will allow you to see the HTML

    >code of your webpage.

    >

    >3. Copy the following HTML code:

    >

    >

    >4. Paste the code where you want the blog to appear in relation to

    >the other objects on your page. You might have to experiment a few times

    >in order to perfect the positioning. You can do this by pushing the

    >"Source" button and switching back to the graphical view.

    3 4

    /* Open Wide! Demo here: http://www.wolfsnap.com */

    .galleries #homepage,

    #content.userKeywords,

    #header_wrapper, #footer_wrapper, #cobrand_footer,

    #category, #subcategory, #header,

    #smugmug, .smugmug #header, .smugmug #footer {

    margin-left: 15px;

    margin-right: 15px;

    min-width: 755px;

    width: auto;

    _width: expression(document.documentElement.clientWidth < 790? "760px" : "auto")

    }

    Page 10 of 12instructions

    5/19/2010http://donredding.com/instructions.htmlPDF created with pdfFactory Pro trial version www.pdffactory.com

    http://support.microsoft.com/kb/922120http://www.dgrin.com/showthread.php?t=93221http://www.moonriverphotography.com/http://donreddingsrunc1959.blogspot.com/http://www.smugmug.com/ria/ShizamSlides-2007090601.swfhttp://www.smugmug.com/ria/ShizamSlides-2007090601.swfhttp://www.blogger.com/http://www.yourwebsitenamehere.com/http://www.wolfsnap.com/http://donredding.com/instructions.htmlhttp://www.pdffactory.com/http://www.pdffactory.com/http://donredding.com/instructions.htmlhttp://www.wolfsnap.com/http://www.yourwebsitenamehere.com/http://www.blogger.com/http://www.smugmug.com/ria/ShizamSlides-2007090601.swfhttp://www.smugmug.com/ria/ShizamSlides-2007090601.swfhttp://donreddingsrunc1959.blogspot.com/http://www.moonriverphotography.com/http://www.dgrin.com/showthread.php?t=93221http://support.microsoft.com/kb/922120
  • 8/9/2019 Don Red Ding Com Instructions

    11/12

    >

    >5. You can adjust the size of the blog by changing the numbers in

    >the HTML code that read width="740" height="950"

    >

    >6. Save your content and you're done!

    Instructions for weekly updates for Upper Room and Thursday Men's Bible for the Noon Men's Bible Study To Top1> Scan current Bible reading for day (Paperport, 0ok)

    Put in Bible/noon men's bible groupScan as pdfPrint to FinePrint

    2>Go tohttp://www.donredding.com/2009biblestudyschedule.htmland copy the day's readings from Bible

    3> goto Bible Search athttp://www.biblegateway.com/passage/

    4> PAste in and edit the link from ScheduleMark 9: 2 - 13, Proverbs 18: 24, Ecclesiastes 4: 8 - 12Can all go on one line!!(JUst discovered 5/21/09)Print to Fine Print

    5> Go to Email and selectGo to other church/ upper room/This Week newdelete and remove last week and duplicatesSelect the current week's readings of upper Roommove to this weekelect and printremove extra pagesselect all this week

    Print6> Go to Fine print

    remove extra pagesprint by/to PDF ProSave as today.pdfgo to internet and checkhttp://www.donredding.com/today.pdf

    7> Send up to Powweb from don/documents/0www to /htdocs8> Go to MAc

    download today.pdf on to desktop

    To Top

    STAR ADDRESSownbey star 20080917moz-screenshot-107.jpg

    To Top

    Routine for developing "today.pdf" each Week (Updated 2/15/2010)

    1. See other instructions for Upper Room to get Devotional Bible copy

    Page 11 of 12instructions

    5/19/2010http://donredding.com/instructions.htmlPDF created with pdfFactory Pro trial version www.pdffactory.com

    http://www.donredding.com/2009biblestudyschedule.htmlhttp://www.biblegateway.com/passage/http://www.donredding.com/today.pdfhttp://donredding.com/instructions.htmlhttp://www.pdffactory.com/http://www.pdffactory.com/http://donredding.com/instructions.htmlhttp://www.donredding.com/today.pdfhttp://www.biblegateway.com/passage/http://www.donredding.com/2009biblestudyschedule.html
  • 8/9/2019 Don Red Ding Com Instructions

    12/12

    1. Instructions for weekly updates for Upper Room and Thursday Men's Bible for the Noon Men's Bible Study To Top1. Use Paperport to Scan current Bible reading for day (Paperport, 0ok) Put in Bible/noon men's bible group in Oaoerport Scan as pdf Print to FinePrint2. Go to http://www.donredding.com/2009biblestudyschedule.html and copy the day's readings from Bible3. goto Bible Search at http://www.biblegateway.com/passage/4. Paste in and edit the link from Schedule. EXAMPLE: Mark 9: 2 - 13, Proverbs 18: 24, Ecclesiastes 4: 8 - 12 Can all go on one line!!(JUst discovered

    5/21/09) Print to Fine Print5. (This is variation on #2 Below, not sure which is best)6. Go to Email and select Go to other church/ upper room/This Week new7. delete and remove last week and duplicates8. Select the current week's readings of upper Room9. move to this week

    10. elect and print

    11. remove extra pages12. select all this week13. Print14. Go to Fine print15. remove extra pages16. print by/to PDF Pro17. Save as today.pdf18. go to internet and checkhttp://www.donredding.com/today.pdf19. Send up to Powweb from don/documents/0www to /htdocs20. Go to MAc21. download today.pdf on to desktop

    2. VARIATON:1. Open email for the day sometime after it arrives at 5 a.m.2. Print it to fine Print.3. Remove any extra pages4. In Fineprint Open the current thursday info/copy with page number name for week in Men's Devotional Bible (ex 1150.fp)

    3. Go to Fineprint Jobs and move latest (probably on top) to bottom4. If "stamps" there, remove check mark (as will number in pdf)5. Save to page number name for week in Men's Devotional Bible (ex 1150.pdf)

    6. print to pdf7. click stamps for page number8. pdf print9. Save to Owww directory as today.pdf

    10. Close out Fineprint and pdf pro11. Open WS_FTP12. Watch out for Double Printing as I just did (can tell by size, through Monday was 578 k)13. find today.pdf and send to main directory on line14. doublecheck the size to see if all looks ok15. Open seamonkey/browser to to on line16. go to http://www.donredding.com/today.pdfand takes 12 seconds first time (on Monday) to open17. Double Check18. Close WS_FTP19. Close FinePrint20. Close Browser21. Revise these instructions as needed

    Page 12 of 12instructions

    5/19/2010h //d ddi /i i h l

    http://www.donredding.com/2009biblestudyschedule.htmlhttp://www.biblegateway.com/passage/http://www.donredding.com/today.pdfhttp://www.donredding.com/today.pdfhttp://donredding.com/instructions.htmlhttp://donredding.com/instructions.htmlhttp://www.donredding.com/today.pdfhttp://www.donredding.com/today.pdfhttp://www.biblegateway.com/passage/http://www.donredding.com/2009biblestudyschedule.html