Domonial Wireless Alarm System

TCPA Keyfobs

July 2013

Honeywell Proprietary

Honeywell.com

2

TCPA Keyfobs

• Ergonomic and compact design

• Multiple accessories fitting all usages

• Water resistance

• LED to acknowledge successful command

• Backward compatibility – TCPA1B: 1-button -> emulation of TCM800HF (on Domonial)

– TCPA2B: 2-button -> emulation of TCBPA8M-1 (on Domonial)

– See compatibility table for other panels

• Added value functions – Panic Alarm, Drive of actuators, Arming/Disarming, Door bell (with

upcoming new panel firmware)

– Supervision (with upcoming new panel firmware)

Honeywell Proprietary

Honeywell.com

3

Wireless Keyfobs Range

Honeywell Proprietary

Honeywell.com

4

Compatibility with other Panels

Honeywell Proprietary

Honeywell.com

5

TCPA1B 1-Button Panic Alarm Keyfob

APPLICATIONS

• Panic/Hold-up alarm

• Life comfort

• User supervision

BENEFITS

• Usable all time

• Simple to operate

• Well fitting design

• Long battery life

KEY FEATURES

• Panic Alarm (default)

• Multi-wear accessories

• Water resistant IP67

• Supervised (upcoming)

• Status LED

• 4 years battery life

• Alpha, V2, Alpha Russia

radio protocols

• Backward compatible

• Other optional modes: • Home automation

• Doorbell (upcoming)

• User supervision (upcoming)

Honeywell Proprietary

Honeywell.com

6

TCPA2B 2-Button Panic Alarm Keyfob

APPLICATIONS

• Panic/Hold-up alarm

• Life comfort

• User supervision

BENEFITS

• Usable all time

• Simple to operate

• Well fitting design

• Long battery life

KEY FEATURES

• Panic Alarm (default)

• Multi-wear accessories

• Water resistant IP67

• Supervised (upcoming)

• Status LED

• 4 years battery life

• Alpha, V2, Alpha Russia

radio protocols

• Backward compatible

• Other optional modes: • Home automation

• Setting/Unsetting

• User supervision (upcoming)

Stickers

included

Honeywell Proprietary

Honeywell.com

7

Multi-wear Accessories Included

Pendant

Belt clip / Wall/Desk mount

Keychain

Wristband

Honeywell Proprietary

Honeywell.com

8

Wall/Desk Mount of Bracket Accessory

Possible hole

positions for

wall or desk

mount

• Make a hole in the predefined hole positions.

• Use screws with a head thickness of less than 2mm

Honeywell Proprietary

Honeywell.com

9

Enrolment on Domonial

REGISTRATION PROCEDURE

• First, set the panel to registration mode

• To start registration, press the keyfob button for 5

seconds. The LED will start blinking.

• The keyfob will try to register with the following

sequence of radio protocols: Alpha, V2, Alpha Russia

• On DomoPC 6.0 the keyfob are enroled with the

« TCB800M » type. The new « TCPA1B » or

« TCPA2B » type are supported starting from

DomoPC 6.2

• After the first registration, to enroll again the keyfob

with a different panel remove and put the battery

back before starting the registration procedure

Honeywell Proprietary

Honeywell.com

10

TCPA1B Configuration

CONFIGURATION VIA DOMOPC

• Select the wanted button behavior on the Alert column of the

Keyfobs/Standard settings window for the registered keyfob

• Current panels only offer Alert1/2/3 options. Other optional

TCPA1B modes will be supported by upcoming panel SW

Honeywell Proprietary

Honeywell.com

11

TCPA2B Configuration – DomoPC 6.0

CONFIGURATION VIA DOMOPC 6.0

• Select the wanted buttons behavior using the following

Keyfobs settings: • Long push (2s) of both buttons Standard tab / Alert column

• Right button Advanced tab / «Ctrl+Part Arm» column

• Left button Advanced tab / «Ctrl+Arm» column

• Short push (300ms) of both buttons Advanced tab / «Ctrl+Disarm» column

• Current panels only offer some options. Other optional

TCPA2B modes will be supported by upcoming panel SW

Honeywell Proprietary

Honeywell.com

12

TCPA2B Configuration – DomoPC 6.2

CONFIGURATION VIA DOMOPC 6.2

• Select the wanted buttons behavior using the

following settings in the Keyfobs Advanced tab: • Short push (300ms) of both buttons Short double push

• Long push (2s) of both buttons Long double push

• Right button

• Left button

• Current panels only offer some options. Other

optional TCPA2B modes will be supported by

upcoming panel SW

Honeywell Proprietary

Honeywell.com

13

Battery Replacement

BATTERY REPLACEMENT

1. Remove 4 screws (①) and lift off cover.

2. Using a small flat-blade screwdriver remove old battery (②).

3. Insert new battery by placing new battery under the gold tab

and then pressing down (③). Ensure the positive (+) side of

battery is face up after installation

4. Align cover and attach with 4 screws

NOTE: When replacing the battery, wait a minimum of 10 seconds prior to

installing the new battery

Honeywell Proprietary

Honeywell.com

14

Battery Lifetime

BATTERY LIFETIME

• Battery lifetime depends on number of activations per

month and supervision period

• Protocol alpha example: more than 4 years of lifetime

with 200 activations per month without supervision

Honeywell Proprietary

Honeywell.com

15

THANK YOU

Honeywell Proprietary

Honeywell.com

16

Enrolment on Vista (1/2)

SELECTION OF THE PROTOCOL

• To work with Vista + 5882EUHS, TCPA1B/TCPA2B must

be set into V2 protocol

• This must be done BEFORE enrolment on panel − TCPA1B: press the button for 5sec

− TCPA2B: press simultaneously both buttons for 5sec

• Then, the keyfob LED will blink during 10-15sec

• Without any « answer » coming back in ALPHA or

RUSSIA protocol, the keyfob will be automatically set in

V2

• IMPORTANT: This must be done before setting the panel

into enrolment mode.

Honeywell Proprietary

Honeywell.com

17

Enrolment on Vista (2/2)

ENROLMENT As any other keyfob working with Vista panels, enrolment

will be done by pressing the button(s) on panel request.

1. Enter in programming mode (install code +8+0+0)

2. Enter in zone programming (*56)

3. Select zone where keyfob will be enrolled

4. Choose appropriate zone type (mostly 06-07: panic

silent or audible, or any other type desired)

5. Select RF button

6. For enrolment, on panel request, press the keyfob

button (TCPA1B) or the 2 buttons simultaneously

(TCPA2B)

7. Press the button(s) again, and if requested confirm a

3rd time

8. Program then alpha description, pass to another zone

or exit zone programming with 00.

10 Input S/N L

AXXX-XXXX 1

Xmit to Confirm

Press * to Skip