Document No. : CL-F-SKF Version: vG2 · Brazil Company SKF Lubrication Systems Brazil Address Av....

Program book/Guidelines for SKF Lubrication Systems – SKF Products

Document No. : CL-F-SKF

Version: vG2.2

Original Date: 9-15-2009 Revision Date: 1-31-2014

Central Manufacturing Engineering SKF Lubrication Solutions

Page No.: 2 of 62 Document No.: CL-F-SKF Version G2.2 Original Date: 09-15-2009 Revised Date: 01-31-2014

Document Management Information

The controlled version of this document is the one stored on the GMPT Machinery and Equipment Specifications website. Any printed copy is an uncontrolled copy. The user shall verify with the website that he/she is using the appropriate version of the specification for the specific project he/she is working on. Any questions or comments with respect to this specification should be directed to the project engineer for the specific project in question.

Revision Date

Version No.

Document Name

Revision

Paragraph Affected

Revised By

09-15-2009 G1.0 CL-F-SKF First Version Released All SKF

11-01-2010 G1.1 CL-F-SKF

Filtration level changed to 10 micron from 25 micron on several units. Updated several part numbers. Added float switch

3.4.1, 3.4.2, 3.5.3, 3.5.5,3.6.3 5.21, 5.22, 5.23, 5.24, 5.29, 5.32, 5.33, 5.34

Dan Schultz

08-16-2012 G1.2 CL-F-SKF

Level switch technical clarification stating W1 is for NLGI 2 grease and W2 is for NLGI 000, 00, 0, and 1

5.19, 5.20 R. Reynolds

02-04-2013 G2.0 CL-F-SKF

Added clear plastic reservoirs. Added more oil+air /mist products Added new piston pump option. Secondary 4mm plastic lines. Quick connect fittings, 4mm

3.5.1, 3.5.2 3.3.4 - 3.3.7 3.7.3 3.11, 5.42 3.10, 5.41

R. Reynolds

04-19-2013 G2.1 CL-F-SKF Added note "Engineering Approval Required" to Series 170 System

3.3.5 R. Reynolds

01-31-2014

G2.2

CL-F-SKF

Changed part numbers to match drawings. Fixed hydraulic symbol Updated hyperlink Removed circuit diagram, updated hyperlink Added country codes Added country codes, removed MF pump Removed MFE pump Added country codes Updated part numbers Updated part number, added hyperlink to brochure Added index section for oil streak sensors Added hyperlink to brochure Updated drawing Added drawing of SL-33 Updated drawings

3.1.1-3.14 3.2.4 3.2.5 3.2.6 3.3.2 3.4.1 3.5.2, 3.5.4 3.6.1, 3.6.2 3.7.3 3.8.4 3.8.5 3.9.1-3.9.3 5.2 5.13 5.18, 5.19

S. Moninger



Changed to drawing of pump only Added drawings Removed MFE-BW30-V59 Changed drawing Fixed drawing Changed drawing Updated drawing

5.21 5.22 5.23 5.24-5.29 5.30 5.31 5.40, 5.41



Contents

1. GENERAL INFORMATION....................................................................................................................................5

1.1. Scope of Document............................................................................................................................................5

1.2. Voltage specifications for AC motors..............................................................................................................5

2. TECHNICAL, PROJECT AND SALES SUPPORT CONTACTS..........................................................................6

2.1. Technical Support..............................................................................................................................................6

2.2. Project and Sales Contacts……………………………………………………......................….............................7

3. PRODUCT OVERVIEW…………………………………………………………………....………................................8

3.1. Piston distributor system…………………………………………………...........………......................................8

3.2. Progressive feeder system………………………………………………………..................................................9

3.3. Oil Air Lubrication…………………………………………………………........…….............................................10

3.4. Pumps……………………………………………………………………............……..............................................11

3.5. Gear and piston pump units with reservoir for oil…………………………....……........................................11

3.6. Pump units for fluid grease…………….…………………………………..........................................................11

3.7. Piston pumps electrically powered for fluid grease and grease…….........…............................................12

3.8. Control and monitoring units……………………………………..............………..............................................12

3.9. Filters………………………………………………………………….............……..................................................13

3.10. Quick Connect Fittings for secondary plastic lines.....................................................................................13

3.11. Secondary distribution lines - 4 mm plastic tubing.....................................................................................14

4. SAMPLE LUBRICATION CHARTS………………………………………………………...…...................................15

4.1. Single line parallel piston distributors……………………………………....…................................................15

4.2. Single line series progressive system………………………………......………..............................................16

4.3. Grease nipple lubrication…………………………………………..........….........................................................17

5. TECHNICAL DATA / FORMATION……………………………………………………….....…….............................18

5.1. 320 Metering units for oil and fluid grease with solderless tube connection............................................18

5.2. 320 Metering units for oil and fluid grease with quick connectors…...........…….......................................19

5.3. 340 Piston distributors for oil with solderless tube connection………...........……....................................20

5.4. 340 Piston distributors for oil with quick connectors…………………...…..................................................21

5.5. 340 Piston distributors for fluid grease with solderless tube connection.................................................22

5.6. 340 Piston distributors for fluid grease with quick connectors…..............…............................................23

5.7. 350 Piston distributors for oil with solderless tube connection……......………..........................................24

5.8. 350 Piston distributors for oil with quick connectors…………...................................................................25

5.9. 350 Piston distributors for fluid grease with solderless tube connection................................................26



5.10. 350 Piston distributors for fluid grease with quick connectors…………...……….....................................27

5.11. 390 Piston distributors for oil with solderless tube connection………………..……..................................28

5.12. 390 Piston distributors for fluid grease with solderless tube connection…..……....................................29

5.13. SL-33 Injector manifold………………………………………………………………………………………….……30

5.14. VPG progressive feeder…………………..……………………………………......………...................................31

5.15. VPBG progressive feeder………………………………………………………......………..................................32

5.16. VPKG progressive feeder……………………………………………………………..……..................................33

5.17. VPG-VEN Zone control valve……………………………………………………………….……………………….34

5.18. Oil + Air unit………………………………………………………………………………….…................................35

5.19. MV Mixing valves for oil + air lubrication MV20x-20-V58-VS…………………………..................................37

5.20. KFG1-5W1-V57+924 Piston pump electrically operated for grease NLGI 2 "only"...................................38

5.21. KFG1-5W2-V57+924 Piston pump electrically operated for grease NLGI 000, 00, 0, and 1.....................39

5.22. MFE5 – Units for oil…………………………………………………...………………......…..................................40

5.23. MFE5 – units with reservoir for oil……………………………………………………...…..................................42

5.24. MFE5-KW3-V59………………..………...………………………………………………..........................................43

5.25. MFE5-BW3-V59……………………………………………………………………………….………………………..44

5.26. MFE2-KW3F-V58E+*** for fluid grease…………………………….………………………………………………45

5.27. MFE2-KW6F-V58E+*** for fluid grease…………………………………………………………………………….46

5.28. KFB1 lube unit for fluid grease with 1 liter reservoir……………..…………………………………………….47

5.29. P-886-BW*-V58 units for oil…………………………………………...……………………………………………..48

5.30. Float switch for minimum level with pre-warning WS35-S30-***……………...………………………………50

5.31. Float switch for minimum level with pre-warning WS35-2-XXX-V71………………..………………………..51

5.32. Float switch for fluid grease BK6.U117-V57…………………………………………….………………………..52

5.33. 176-190-000 digital pressure switch…………………………………………….………………………………….53

5.34. VCM - Mist type lubrication............................................................................................................................54

5.35. Series 170 System for part lubrication with internal controls....................................................................55

5.36. VSR System for part lubrication with external controls.............................................................................56

5.37. LGTPN Spray Nozzle Assemblies for oil/air.................................................................................................57

5.38. Quick Connect Fittings for Secondary lines, 4 mm plastic........................................................................58

5.39. WVN Secondary Distribution Lines, 4 mm plastic tubing...........................................................................59

5.40. 278517 Piston pump electrically operated for grease.................................................................................60

5.41. 278518 Piston pump electrically operated for grease.................................................................................61



1. General Information 1.1. Scope of Document

This delivery specification covers basic conditions for the design of lubrication systems for manufacturing equipment and production facilities. This standard promotes machine uptime, system commonality, operating functionality and reduced central lubrication equipment lifecycle costs.

1.2. Voltage specifications for AC motors

Voltage specifications may vary from plant to plant. Consult the responsible GMPT Controls Engineer for the correct voltage in compliance with the project requirements.



2. Technical, Project and Sales Support Contacts 2.1. Technical Support

North America Europe

Company SKF Lubrication Systems USA, Inc. SKF Lubrication Systems

Germany

Address 2115 Aluminum Ave Hampton, VA. 23661

Motzener Str.35/37 12277 Berlin

Phone 757-951-0370 +49-30-720020

Website www.skf.com lubrication www.skf.com lubrication

Local Support Frank Casinelli Sean Moninger Uwe Lipinski

Office (757) 951-0370 (757) 951-0370 +49-30-72002235

Mobile (248) 982-7411 n/a n/a

Fax (757) 951-0369 (757) 951-0369 +49-30-72002481

E-mail [email protected] [email protected] [email protected]

Brazil P.R. China East Asia

Company SKF Lubrication Systems Brazil

SKF Lubrication Systems China

SKF Lubrication Systems

Japan Ltd.

Address

Av. Marginal do Ribeirao do Cristais, 200 Plato B – Bloco 1100 Joranesia, Cajamar, San Paulo – 07750-000

No 377 Bansongyuan Road Shanghai, PRC

1-15-22 Imagone Higashi-Osaka Osaka 578-0903

Phone +55-11-44488200 +86-21-53068866 +81-729-642500

Website www.skf.com lubrication www.skf.com lubrication www.skf.com lubrication

Local Support Andre Tamaki Tony Dia Frank Allgeier

Office +55-11-992102962 +86-21-53068866 +81-729-643551

Mobile +55-11-992102962 n/a n/a

Fax n/a n/a +81-729-651258

E-mail [email protected] [email protected] [email protected]

http://www.skf.com/group/products/lubrication-solutions/index.html?alias=www.skf.com/lubrication


mailto:[email protected]





http://www.skf.com/group/products/lubrication-solutions/index.html?alias=www.skf.com/lubricationhttp://www.skf.com/group/products/lubrication-solutions/index.html?alias=www.skf.com/lubrication

mailto:[email protected]?subject=GM%20Powertrain%20Project%20book





2.2. Project and Sales Contacts

North America Europe East Asia

Company

Morrell Inc. SKF Lubrication Systems USA, Inc.

SKF Lubrication Systems Germany

SKF Lubrication Systems Japan Ltd.

Address 3333 Bald Mountain Rd. Auburn Hills, MI. 48326

2115 Aluminum Ave. Hampton, VA. 23661

Motzener Str. 35/37 12277 Berlin

1-15-22 Imagone Higashi-Osaka Osaka 578-0903

Phone (248) 373-1600 (757) 951-0370 +49-30-720020 +81-729-642500

Website www.morrellinfo.com www.skf.com lubrication www.skf.com lubrication www.skf.com lubrication

Project Contact Chris Ernst Frank Casinelli Karin Schirocki Frank Allgeier

Office (248) 830-7072 (757) 951-0370 +49-30-72002294 +81-729-643551 Mobile n/a (248) 982-7411 n/a n/a

FAX n/a (757) 951-0369 +49-30-72002481 +81-729-651258

E-Mail [email protected] [email protected] [email protected] [email protected]

Brazil

Company SKF Lubrication Systems Brazil

Address Av. Marginal do Ribeirao do Cristais, 200 Plato B – Bloco 1100 Joranesia, Cajamar, San Paulo – 07750-000

Phone +55 11 4619 93 40

Website www.skf.com lubrication

Project Contact Franklin Dias

Office +55-11-994805537 Mobile +55-11-994805537

Fax +55-11-46199199

Email [email protected]

http://www.morrellinfo.com/

http://www.skf.com/lubrication

http://www.skf.com/lubrication

http://www.skf.com/group/products/lubrication-solutions/index.html?alias=www.skf.com/lubricationhttp://www.skf.com/group/products/lubrication-solutions/index.html?alias=www.skf.com/lubrication










3. Product Overview 3.1. Piston distributor system

Section No.

Section Title Symbol SKF – No. Remark GM – No.

3.1.1.

Single line parallel systems piston distributors for oil with quick connector

320-401-31-VS 320-402-31-VS 320-403-31-VS 320-406-31-VS 320-410-31-VS 320-416-31-VS 342-1XX-000-V57* 343-1XX-X00-V57* 345-1XX-XXX* 352-0XX-000-VS-V57* 353-0XX-X00-VS-V57* 355-0XX-XXX-VS-V57*

0.01 cm³ 0.02 cm³ 0.03 cm³ 0.06 cm³ 0.10 cm³ 0.16 cm³ see drawing

3.1.2.

Single line parallel systems piston distributors for oil with solderless tube connection

320-401-31 320-402-31 320-403-31 320-406-31 320-410-31 320-416-31 342-4xx-000-V57* 343-4xx-x00-V57* 345-4xx-xxx-V57* 352-0xx-000-V57* 353-0xx-x00-V57* 355-0xx-xxx-V57* 392-00x-000-V57* 393-0xx-x00-V57*

0.01 cm³ 0.02 cm³ 0.03 cm³ 0.06 cm³ 0.10 cm³ 0.16 cm³ see drawing

3.1.3.

Single line parallel systems piston distributors for fluid grease with quick connectors

321-403-31-VS 321-406-31-VS 321-410-31-VS 342-9xx-000-V57* 343-9xx-x00-V57* 345-9xx-xxx-V57* 352-1xx-000-VS-V57* 353-1xx-x00-VS-V57* 355-1xx-xxx-VS-V57*

0.03 cm3 0.06 cm3 0.10 cm3 see drawing



3.2. Progressive feeder system

Section No.

Section Title Symbol SKF-No. Remark GM – No.

3.2.1 Progressive feeder

section feeder

VPG-3-xxx

VPG-4-xxx

VPG-5-xxx

VPG-6-xxx

VPG-7-xxx

VPG-8-xxx

VPG-9-xxx VPG-10-xxx

3.2.2

Progressive feeder

Section feeder

(for gantries only)

VPKG-3-xxx

VPKG-4-xxx

VPKG-5-xxx

VPKG-6-xxx

VPKG-7-xxx

VPKG-8-xxx

VPKG-9-xxx VPKG-10-xxx

3.1.4.

Single line parallel system piston distributors for fluid grease with solderless tube connection

321-403-31 321-406-31 321-410-31 342-5xx-000-V57* 343-5xx-x00-V57* 345-5xx-xxx-V57* 352-1x0-000-V57* 353-1xx-x00-V57* 355-1xx-xxx-V57* 392-1xx-000-V57* 393-1xx-x00-V57*

0.03 cm3 0.06 cm3 0.10 cm3 see drawing

3.1.5

Single line injector system for fluid grease. Available with single outlet or up to 5 outlets Lincoln Centro-Matic Grease Injectors

85351-1 85351-2 85351-3 85351-4 85351-5 SL-33 Brochure

Output: Adjustable from: 0.016 cm3 to 0.049 cm3

See Drawing

http://www.lincolnindustrial.com/Catalogs/_English/00-MAIN_Catalogs/Centro-Matic.pdf



G

3.23

Progressive feeder

Block feeder

(for manual grease-nipple systems only)

VPBG-3-xxx

VPBG-4-xxx

VPBG-5-xxx

VPBG-6-xxx

VPBG-7-xxx

VPBG-8-xxx

VPBG-9-xxx VPBG-10-xxx

3.2.4 Zone control valve

VPG-VEN-S1-V57+924

3.2.5 Blockage indicator for VPG

VPG-UE16-2 VPG-UE32-2 VPG-UE50-3 VPG-UE63-2 VPG-UE80-2 VPG-UE100-2

16 bar 32 bar 50 bar 63 bar 80 bar 100 bar

3.2.6

Cycle indicator

Auxiliary equipment

Pin 1: +10-35VDC

Pin 2: Output

Pin 3: Common

177-300-094

177-300-095 177-300-097

VPG VPKG VPBG

3.3. Oil Air Lubrication

Section No.


3.3.1 Oil+air mixing valves

MV202-20-V58-VS MV203-20-V58-VS MV204-20-V58-VS MV205-20-V58-VS MV206-20-V58-VS MV207-20-V58-VS MV208-20-V58-VS

3.3.2 Oil+air unit See drawings

OLA**-V58A+*** OLA**-V58N+***

V58A includes motor for Asia CCC certified V58N includes motor for North America/Europe UL and CSA certified

3.3.4 Oil micron unit for Oil Mist lubrication See drawings VCM-2000-KW3-SP2

Consult Engineering for recommended configuration

3.3.5 Series 170 System for part lubrication with internal controls Engineering Approval Required!!

See drawings 170-GD-***

Engineering Approval Required!!

http://www.skf.com/binary/149-34298/1-0107-6-EN.pdf

http://www.skf.com/binary/149-34298/1-0107-6-EN.pdf



3.4. Pump units without reservoir for oil

Section No.


3.4.1 Oil gear, gerotor and vane pumps

See drawing MFE*-V58A-+*** MFE*-V58E-+*** MFE*-V58N-+***

FLMF-*** 143-012-***+***

V58A includes motor for Asia CCC certified V58E and V58N include motor for Europe/North America UL and CSA certified

3.4.2 Fluid grease gear pumps MFE2-F-***-V58+***

3.4.3 Piston pump for piston distributor pneumatically operated for oil

P-886 30 cm³/stroke

3.5. Gear and piston pump units with reservoir for oil

3.3.6 VSR System for part lubrication with external controls

See drawings VSR-GD-***

3.3.7 LGTPN Spray Nozzle Assemblies for oil/air

See drawings LGTPN-*-NY-**-*** LGTCN-*-NY-**-*** LGTFN-*-NY-**-***

pinpoint cone fan

Section No.


3.5.1 Oil gear pump units for piston-distributor with clear reservoir

See drawing

MFE5-KW3-V59+*** MFE5-KW6-V59+***

3.5.2 Oil gear pump units for progressive feeder with clear reservoir

MF2-KW6-V59+***

3.5.3 Oil gear pump units for piston distributor with metal reservoir

See drawing

MFE5-BW*-V59+***

3.5.4 Oil gear pump units for progressive feeder with metal reservoir

MF*-BW*-V59+***

3.5.5 Oil piston pump units for assembly lubrication

See drawing

P-886-BW7-V58 P-886-BW16-V58

http://www.skf.com/binary/12-32142/1-1204-EN.pdf




3.6. Pump units for fluid grease

Section No.

Section Title Symbol SKF – No. Remark GM – No

3.6.1

Gear pump unit with 3L clear reservoir for fluid grease for Parallel systems with piston distributors (The signal of level switch must be evaluated as pre-warning signal. The machine has to be switched off after 300 working cycles by PLC) (Minimum-level)

See drawing

MFE2-KW3F-V58A+*** MFE2-KW3F-V58E+*** MFE2-KW3F-V58N+***

V58A includes motor for Asia CCC certified V58E and V58N include motor for Europe/North America UL and CSA certified

3.6.2

Gear pump unit

with 6L clear reservoir for fluid

grease for piston distributor

See drawing

MFE2-KW6F-V58A MFE2-KW6F-V58E+*** MFE2-KW6F-V58N

V58A includes motor for Asia CCC certified V58E and V58N include motors for Europe/North America UL and CSA certified

3.6.3

Compact unit for gantries for fluid

grease. With Walther quick

disconnect.

See drawing

KFB1-M-W-S2+924

3.7. Piston pumps electrically powered for fluid grease and grease

Section No.


3.7.1

Piston pumps with

capacitive level switch for

fluid grease

See drawing

KFG1-5W2-V57+924 KFG3-5W2-V57+924

2 kg 5 kg

3.7.2

Piston pumps with

mechanical level switch for

grease:

See drawing

KFG1-5W1-V57+924 KFG3-5W1-V57+924 KFA1-M-W-V57+924

2 kg 5 kg 1 kg

3.7.3

Piston pump with reservoir

for single line parallel

systems for up to NLGI 2

grease. Pump includes

reservoir, pressure switch

and relief valve.

See drawing

278517 278518

4 liter 8 liter

3.8. Control and monitoring units

Section No.


3.8.1 Level switch for oil

WS35-S-XXX-V71 WS35-S30+***



L

PF

F

3.8.2 Level switch for fluid grease

BK6.U117-V57

3.8.3 Oil pressure switch, electronic

176-190-000 IFM: PN7002

3.8.4 Flow monitor micro flow, electronic

GS300 GS304* 171-100-*** 171-210-***

3.8.5 Oil-streak sensor

GS4011-S*** GS6011-S***

3.9. Filters

Section No.


3.9.1 Oil filter

169-460-185-V57

25 µm

3.9.2 Oil filter

169-460-087-V57 10 µm

3.9.3 Oil filter for oil + air systems

169-460-260-V57

3 µm

3.10. Quick Connect Fittings for Secondary lines, 4 mm

Section No.


3.10.1

Push to connect fittings for 4 mm O.D. plastic tubing; elbows, swivel banjos, and straight adapters

See drawing for commonly used items Brochure 1-0103-EN Fittings and Accessories

http://www.skf.com/binary/12-32184/1-1704-EN.pdf%E2%80%8E




http://www.skf.com/binary/12-32184/1-1704-EN.pdf%e2%80%8e/index.html

http://www.skf.com/binary/12-32184/1-1704-EN.pdf%e2%80%8e/index.html








3.11. Secondary Distribution Lines - 4 mm plastic tubing

Section No.


3.11.1

Flexible 4 mm tubing for Oil and Fluid Greases up to NLGI grade 00

WVN716-RO4X0.85

36 bar

3.11.2 Semi-Rigid 4 mm tubing for Greases up to NLGI grade 2

WVN715-RO4X0.85 72 bar



4. Sample lubrication charts 4.1. Single line parallel piston distributors



4.2. Singe line series progressive system



4.3. Grease nipple lubrication



5. Technical data / information 5.1. 320 Metering units for oil and fluid grease with solderless tube connection



5.2. 320 metering units for oil and fluid grease with quick connectors



5.3. 340 piston distributors for oil with solderless tube connection



5.4. 340 Piston distributors for oil with quick connectors



5.5. 340 Piston distributors for fluid grease with solderless tube connection



5.6. 340 Piston distributors for fluid grease with quick connectors



5.7. 350 Piston distributors for oil with solderless tube connection



5.8. 350 Piston distributors for oil with quick connectors



5.10. 350 Piston distributors for fluid grease with quick connectors



5.11. 390 Piston distributors for oil with solderless tube connection



5.13. SL-33 Injector Manifold



5.14. VPG progressive feeder



5.15. VPBG Progressive feeder – for manual grease – nipple systems only



5.16. VPKG Progressive feeder



5.17. VPG-VEN Zone control valve



5.18. Oil + Air units 5.18.1. OLA**-**V58A+XXX



5.18.2. OLA**-**V58N+XXX



5.19. MV Mixing valves for Oil+air lubrication MV20X-20-V58-VS



5.20. KFG1-5W1-V57+924 Piston pump electrically operated for grease NLGI 2 "only"



5.21. KFG1-5W2-V57+924 Piston pump electrically operated for grease NLGI 000, 00, 0, and 1



5.22. MFE5 – Units for oil 5.22.1. MFE5-V58A+***



5.22.2. MFE5-V58N+***



5.23. MFE5 – Units with reservoir for oil

MFE5-BW3-V59+***

MFE5-BW7-V59+***

MFE5-BW16-V59+***

MFE5-KW3-V59+***

Part no. A B C D E F

MFE5-BW3-V59* 220x110 240 170 380 295 170

MFE5-BW7-V59* 300x140 320 220 430 375 250

MFE5-BW16-V59* 400x124 430 305 510 465 285

MFE5-BW30-V59* 430x240 500 380 600 510 430



5.24. MFE5-KW3-V59



5.25. MFE5-BW3-V59



5.26. MFE2-KW3F-V58E+*** for fluid grease



5.27. MFE2-KW6F-V58E+*** for fluid grease



5.28. KFB1 lube unit for fluid grease with 1 liter reservoir



5.29. P-886-BW* units for oil 5.29.1. P-886-BW7-V58



5.29.2. P-886-BW16-V58



5.30. Float switch for minimum level with pre-warning WS35-S30+***



5.31. Float switch for minimum level with pre-warning WS35-2-***-V71



5.32. Float switch for fluid grease BK6.U117-V57



5.33. 176-190-000 Digital pressure switch



5.34. VCM – Mist type lubrication



5.35. Series 170 system for part lubrication with internal controls



5.36. VSR System for part lubrication with external controls



5.37. LGPTN Spray nozzle assemblies for oil/air



5.38. Quick Connect Fittings for secondary lines, 4 mm plastic



5.39. Secondary distribution lines - 4 mm plastic tubing



5.40. 278517 Piston pump electrically operated for grease, 4 liters



5.41. 278518 Piston pump electrically operated for grease, 8 liters

Document No. : CL-F-SKF Version: vG2 · Brazil Company SKF Lubrication Systems Brazil Address Av....

Documents

Transcript of Document No. : CL-F-SKF Version: vG2 · Brazil Company SKF Lubrication Systems Brazil Address Av....