Dockweiler BPE Spec
1
Dockweiler AG An der Autobahn 10/20 · D-19306 Neustadt-Glewe · Germany · Tel. +49 (0)38757 58-0 · Fax +49 (0)38757 58-222 · e-mail: [email protected] · www.dockweiler.com C7/07/P7/07 Material TP316L, the chemical compositions in accordance to Table DT-3 ASME BPE Chemical Composition in weights % C max. 0.035 Ni = 10.00 – 15.00 Cr = 16.00 – 18.00 P max. 0.040 Mn max. 2.00 Si max 0.75 Mo = 2.00 – 3.00 S = 0.005 – 0.017 further materials on request Dimensions 1/4“ x 0.035 (6.35 x 0.89 mm) to 6” x 0.109 (152.40 x 2.77 mm) Technical terms of delivery Tubes According to ASTM A 269 / A 270, DIN EN 10217-7 / DIN EN 10216-5 Length 5900 - 6090 mm (max. 10% short lengths possible) Fittings Tube components: Prematerial according to ASTM A 269 / A 270, DIN EN 10217-7 / 10216-5 Machined components: Prematerial according to ASTM A 479, DIN EN 10088-3, DIN 17440 Tolerances According to ASTM A 269 / A 270 (pharmaceutical tubes) or DIN EN ISO 1127 - D4/T3 Ends Tubes and fittings are prepared for orbital welding Tolerances Tubes According to ASTM A269 and A270, S2 and DIN EN ISO 1127/ D4/T3 Fittings According to ASME BPE, section DT Surface options inner surface: As per ASME BPE, section SF, Table SF3 Tubes and fittings mechanically polished mechanically polished and electropolished Ra max Ra max μin μm μin μm SF1 20 0.51 SF4 15 0.38 Outer surface: Tubes and Fittings Ra ≤ 0.80 μm (32 μin) Inner surface treatment Tubes Electropolishing procedure Spec. HE 175 4VN Fittings Electropolishing procedure Spec. HE 111 4VN Hardness max.180 HV 5/90 HRB Test procedures • Verification of basic test certificate • Verification of dimensions • Visual control • Roughness measurements • Endoscopic inspection of bright finished tubes Marking - Dockweiler - ASME BPE - Surface symbol as per ASME BPE, section SF - Dockweiler no. (batch no.) - Heat number - Material type - Dimension Documentation Certified Test Report (3.1) as per DIN EN 10204 and ASTM A450 for the prematerial Packaging and Delivery Ends are closed with PE/PA foils and PE caps. Tubes and fittings are individually sealed in PE foil, marked with a white sticker „Dockweiler BPE“, electropolished parts with white sticker „Dockweiler BPE ep“. Delivery of tubes in tubular container or wooden crate, of fittings in strong cardboard box or wooden crate with shock absorbing filler.
description
ASME BPE standard, Dockweiler tube, pharmaceutical grade tubing and fitting system
Transcript of Dockweiler BPE Spec
Dockweiler AGAn der Autobahn 10/20 · D-19306 Neustadt-Glewe · Germany · Tel. +49 (0)38757 58-0 · Fax +49 (0)38757 58-222 · e-mail: [email protected] · www.dockweiler.comC
7/07
/P7/
07
Material TP316L, the chemical compositions in accordance to Table DT-3ASME BPE
Chemical Composition in weights% C max. 0.035 Ni = 10.00 – 15.00Cr = 16.00 – 18.00 P max. 0.040Mn max. 2.00 Si max 0.75Mo = 2.00 – 3.00 S = 0.005 – 0.017further materials on request
Dimensions 1/4“ x 0.035 (6.35 x 0.89 mm) to 6” x 0.109 (152.40 x 2.77 mm)
Technical terms of deliveryTubes According to ASTM A 269 / A 270, DIN EN 10217-7 / DIN EN 10216-5Length 5900 - 6090 mm (max. 10% short lengths possible)Fittings Tube components:
Prematerial according to ASTM A 269 / A 270, DIN EN 10217-7 / 10216-5Machined components: Prematerial according to ASTM A 479, DIN EN 10088-3, DIN 17440
Tolerances According to ASTM A 269 / A 270 (pharmaceutical tubes) or DIN EN ISO 1127 - D4/T3Ends Tubes and fittings are prepared for orbital welding
TolerancesTubes According to ASTM A269 and A270, S2 and DIN EN ISO 1127/ D4/T3Fittings According to ASME BPE, section DT
Surface options inner surface: As per ASME BPE, section SF, Table SF3Tubes and fittings mechanically polished mechanically polished and electropolished
Ra max Ra maxµin µm µin µmSF1 20 0.51 SF4 15 0.38Outer surface: Tubes and Fittings Ra ≤ 0.80 µm (32 µin)
Inner surface treatmentTubes Electropolishing procedure Spec. HE 175 4VNFittings Electropolishing procedure Spec. HE 111 4VN
Hardness max.180 HV 5/90 HRB
Test procedures • Verification of basic test certificate• Verification of dimensions• Visual control• Roughness measurements• Endoscopic inspection of bright finished tubes
Marking - Dockweiler- ASME BPE- Surface symbol as per ASME BPE, section SF- Dockweiler no. (batch no.)- Heat number- Material type- Dimension
Documentation Certified Test Report (3.1) as per DIN EN 10204 and ASTM A450 for the prematerial
Packaging and Delivery Ends are closed with PE/PA foils and PE caps. Tubes and fittings are individually sealed in PE foil, marked with a white sticker „Dockweiler BPE“, electropolished parts with white sticker „Dockweiler BPE ep“. Delivery of tubes in tubular container or wooden crate, of fittings in strong cardboard box or wooden crate with shock absorbing filler.
Dockw.Spezi-08-GB 15.05.2008 15:29 Uhr Seite 9
