DOC27 Artwork Guidelines - Ambroplastics · reviewed: Jul 18 UNCONTROLLED IF PRINTED DOC27 ISSUE...

1
UNCONTROLLED IF PRINTED reviewed: Jul 18 DOC27 ISSUE No. 01 Packaging & Presentation bespoke Artwork Submission Guidelines - Print Check Email / Send link to: General Artwork Notes: Printing with White: Artwork for Screen print: Artwork for CMYK: Clear / Coloured material: Accepted File Formats: [email protected] or [email protected] Proof read your artwork before submission.(Names, addresses etc)……... Designs that run off the edge of the product to have a minimum of 3mm bleed………………………………………………………………………… Be sure to outline all text as paths or include fonts used with your artwork and embed all linked images…………………………………………… Please ensure any raster images are at least 300dpi to ensure a good result………………………………………………………………………… Be mindful of components that may be present such as rivets that may need to be avoided when setting your artwork…………………………… For any files larger than 10MB we suggest using wetransfer.com…………… Make White areas of artwork a solid spot colour and label this clearly in the swatches panel. eg ‘White’ - C=0,M=100,Y=0,K=0’…………………… Screen printed artwork should be set up in Spot colours with Pantone references. If you do not have a Pantone reference we can also match to a supplied colour swatch or previous sample……………………… Our standard inks have a satin finish, if you require a Gloss finish please clearly state this at time of quote/order so we can specify UV inks………… Does your artwork contain half tones? We print half tones at 55dpi as standard. Please contact us for advice regarding halftones…………........Set artwork up in CMYK colour space not RGB……………………………… Artwork printed onto clear or coloured material may require a white underpin to achieve colour match, this is subject to artwork design, ask for details and advice………………………………………………………… Please ensure that all artwork for print is supplied in line with these specifications. Ambro cannot accept responsibility for print errors or late deliveries where artwork has been supplied incorrectly.

Transcript of DOC27 Artwork Guidelines - Ambroplastics · reviewed: Jul 18 UNCONTROLLED IF PRINTED DOC27 ISSUE...

Page 1: DOC27 Artwork Guidelines - Ambroplastics · reviewed: Jul 18 UNCONTROLLED IF PRINTED DOC27 ISSUE No. 01 Packaging & Presentation bespoke Artwork Submission Guidelines - Print Check

UNCONTROLLED IF PRINTEDreviewed: Jul 18 DOC27 ISSUE No. 01

Packaging &Presentation

bespoke

Artwork Submission Guidelines - Print

Check

Email / Send link to:

General Artwork Notes:

Printing with White:

Artwork for Screen print:

Artwork for CMYK:

Clear / Coloured material:

Accepted File Formats:

[email protected] or [email protected]

Proof read your artwork before submission.(Names, addresses etc)……....

Designs that run off the edge of the product to have a minimum of3mm bleed…………………………………………………………………………

Be sure to outline all text as paths or include fonts used with yourartwork and embed all linked images………………………………………………

Please ensure any raster images are at least 300dpi to ensure a good result……………………………………………………………………………

Be mindful of components that may be present such as rivets thatmay need to be avoided when setting your artwork………………………………

For any files larger than 10MB we suggest using wetransfer.com………………

Make White areas of artwork a solid spot colour and label this clearlyin the swatches panel. eg ‘White’ - C=0,M=100,Y=0,K=0’…………………………

Screen printed artwork should be set up in Spot colours with Pantonereferences. If you do not have a Pantone reference we can alsomatch to a supplied colour swatch or previous sample…………………………

Our standard inks have a satin finish, if you require a Gloss finish pleaseclearly state this at time of quote/order so we can specify UV inks……………

Does your artwork contain half tones? We print half tones at 55dpi asstandard. Please contact us for advice regarding halftones…………........…

Set artwork up in CMYK colour space not RGB……………………………………

Artwork printed onto clear or coloured material may require a whiteunderpin to achieve colour match, this is subject to artwork design, ask for details and advice……………………………………………………………

� � � � �

Please ensure that all artwork for print is supplied in line with these specifications. Ambro cannotaccept responsibility for print errors or late deliveries where artwork has been supplied incorrectly.