DMX RGB, RGB-WHITE, RGB-AMBER & TUNABLE WHITE • 0-10V …€¦ · • DMX RGB, RGB-WHITE,...

SPEC CLiP3 dynamic 04_20_IQa of 9

1961 McGaw Ave. • Irvine, CA 92614 • (949) 442-1601 • tempollc.com

CONSTRUCTION• Light weight polymeric components.

• 12” long low profile modules in 1’, 2’, 3’, 4’, 5’ or 6’ fixture lengths.

• Rigid (R) design for straight runs and Serpentine (S) design for curves.

• Join sections and create continuous runs up to 16’ from one power supply

• Easily replaceable LED printed circuit boards

• Proprietary quick wire connection device provides ease of installation

• CSA damp location listed for indoor use

• Meets MRI room requirements

OPTICS / LENS / DIFFUSER• Low profile frosted lens.

FEATURES• 1600K - Lowest CCT available in market for Tunable

White and Warm dim.

• White LEDs with standard CRI of 80+

• All LED’s are selected and placed on the printed circuit boards via Tempo Industries’ UniBin™ process which ensures consistent hue and color within the entire run. Color variations are held to within a maximum of a 2-step MacAdam ellipse.

• Operating temperature range of -20ºC to 50ºC

• Power Supply Total Harmonic Distortion <20%, Power Factor >0.9

24VDC 4-CHANNEL RGB-W & RGB-APower System - 120-277VAC Input, 24VDC Output,

96W, DMX/RDM LED Driver

Controls - DMX512 Wall Mount Touch Controller • Sensitive Touch Glass Panel • RGB-W(A) Color Touch Wheel • 3 Preset Zones

RGB-W Performance - 6W/ft, 472 total lm/ft: Red - 80lm/ft; Green - 168lm/ft; Blue - 44 lm/ft; 3000K - 180lm/ft

Max Run Length - 16 feet (per 100w power supply.)

24VDC 3-CHANNEL RGB & TUNABLE WHITEPower System - 120-277VAC Input, 24VDC Output,

96W, DMX/RDM LED Driver

Controls - DMX512 Wall Mount Touch Controller • Sensitive Touch Glass Panel • Kelvin Color Touch Wheel (Tunable White) • RGB Color Touch Wheel (RGB) • 3 Preset Zones / 6 Preset Kelvin Temp Settings

RGB Performance - 6W/ft, 292 total lm/ft: Red - 80lm/ft; Green - 168lm/ft; Blue - 44 lm/ft

TW Performance - 6W/ft, 613 total lm/ft: 2000K - 157lm/ft; 3000K - 222lm/ft; 4000K - 234 lm/ft

Max Run Length - 16 feet (per 100w power supply.)

24VDC 2-CHANNEL WARM DIM (0-10V)Power System

• 120-277VAC Input, 24VDC Output, LED Driver 100W and 60W options. • 0-10V Warm Dim 2-Channel Control Module 100W max

Controls - 0-10V Wall Mount Dimmer Switch

Performance - 4W/ft (2W per channel cross-fade utilizes only 2W/ft max). 2000K - 157lm/ft; 2700K - 200lm/ft

Max Run Length - 48 feet (per 100w power supply and 100w Control Module.)

APPLICATIONComplete 24V systems with controllers produces uniform illumination designed to accent and highlight spaces such as small coves, under cabinets or millwork. RGB-W, RGB-A, RGB and Tunable White features Tempo supplied DMX driver and intelligent touch control keypad for easy color changing and white color tuning. Warm Dim features 2 channel system with 0-10V dimming control. Designed with modular CLiP® (Configurable Lighting Platform), CLiP 3 dynamic provides options to suit multiple application requirements. Meets MRI room requirements with non-ferrous components and mounting brackets.

CLiP 3 dynamic • DMX RGB, RGB-WHITE, RGB-AMBER & TUNABLE WHITE • 0-10V WARM DIM

PROJECT:

TYPE:

WARRANTYTempo provides a 5-year limited warranty.

86,000 HOURS L85 LUMEN MAINTENANCELED Luminaires will reach 85% of initial lumen output at or beyond 86,000 hours at 25°C.

Buy TempoBuy American

0.9 in[23 mm]

0.9 in[23 mm]

12.0 in[305 mm]

12.0 in[305 mm]

0.7 in[18 mm]

2 foot nominal length24.7”

2 foot

3 foot

4 foot

5 foot

6 foot





0.7 in[18 mm]

Up to 90° rotation between 1 foot modules.

(Top View)

90°




ORDERING INFORMATION

TUNABLE WHITE (3-CHANNEL DMX)

RGB, RGB-W, RGA-A (3 OR 4 CHANNEL DMX)

WARM DIM (2-CHANNEL 0-10V)

C3D -

FL

-0

-6

-RGB LG

-Series Platform Optic/Lens/Diffuser Module Spacing

Watts/Foot

Color Temp Finish Fixture Length

CLiP 3Dynamic

R

S

Rigid

Serpentine

FL Frosted Lens 0 0” 6 6W/ft RGB

RGBW30

RGBA

Red/Green/Blue

RGB-White 3000K*

RGB-Amber

LG Light Gray

123456

1 foot2 foot3 foot4 foot5 foot6 foot

C3D -

FL

-0

-6

-LG


Watts/Foot

Color Temp* Finish Fixture Length

CLiP 3Dynamic

R

S

Rigid

Serpentine

FL Frosted Lens 0 0” 6 6W/ft 3TW1S

3TW2S

2000K/3000K/4000K, 80+ CRI 1600K/3000K/5000K, 80+ CRI

LG Light Gray

123456


C3D -

FL

-0

-4

-LG


Watts/Foot

Color Temp** Finish Fixture Length

CLiP 3Dynamic

R

S

Rigid

Serpentine

FL Frosted Lens 0 0” 4 4W/ft* 2WD1S

2WD2S

2000K/2700K, 80+ CRI 1600K/2700K, 80+ CRI

LG Light Gray

123456


*2W/ft per Kelvin temp channel with cross-fade between channels utilizes only 2W/ft maximum at any setting.** Other color temp mixtures available. Consult factory for details.

*Optional white color temps available: 2200K, 2700K, 3500K, 4000K.

*Other color temp mixtures available. Consult factory for details.



RGB, RGB-W, RGB-A DMX POWER SUPPLIES/CONTROLLER

PWR-UNV-EM-96-DMX 120-277VAC Input, 24V DC Output, 96W, DMX/RDM (includes resistor for end of run DMX signal termination)

PCC-DMX-S1-RGB RGB-(W/A) wall mount touch controller, DMX512; 3 Zones. 100-240VAC input, 12VDC output power supply included. Controller & Power Supply mounts in single gang box (supplied by other).

PCC-DMX-N1 Optional Nicolaudie (Stick-DE3+) DMX Controller, DMX512 (x2), wall mount in single or double gang box. 1024 DMX channels. Control 340 RGP fixture runs. Included AC/DC power supply, Micro SD card and USB Cable.

TUNABLE WHITE DMX POWER SUPPLIES/CONTROLLER

PWR-UNV-EM-96-DMX 120-277VAC Input, 24V DC Output, 96W, DMX/RDM (includes resistor for end of run DMX signal termination)

PCC-DMX-S1-TW Tunable White wall mount touch controller, DMX512; 100-240VAC input, 12VDC output power supply included. Controller & Power Supply mounts in single gang box (supplied by other).

WARM DIM 0-10V POWER SUPPLIES/CONTROLLER Note: Warm Dim fixture is 2 watts per channel with cross-fade for max power draw of 2W/ft

PWR-UNV-EM-100-WDM 120-277VAC, 24V DC Output, 100W Non-Dimming Driver & Warm Dim Module (Warm Dim Module controls 0-10V dimming)

PWR-UNV-EM-60-WDM 120-277VAC, 24V DC Output, 60W Non-Dimming Driver & Warm Dim Module (Warm Dim Module controls 0-10V dimming)

PDS-010-WM-WH 0-10V Wall Mount Dimmer Switch, (Lutron DIva)

SURGE SUPPRESSION DEVICE Tempo furnished surge suppression device must be installed on each supplying branch circuit to comply with 5-year warranty.

SSD-120 120V Branch Circuit

SSD-277 277V Branch Circuit

POWER FEED CABLES Additional lengths available, contact factory

PFC-24V-5-F-36 24V Power Feed, 5-Wire/5-Pin Female Connector, 36 inches

PFC-24V-5-F-240 24V Power Feed, 5-Wire/5-Pin Female Connector, 240 inches (Max Length Power Feed)

JUMPER FEED CABLES Additional lengths available, contact factory

JFC-24V-5-MF-36 24V Jumper Feed, 5-Wire/5-Pin Male/Female Connectors, 36 inches

MOUNTING HARDWARE 18” maximum recommended spacing between mounting clips

C3A-MTGBRKT-SURF Set of 25 plastic Mounting Clips (screws included) 18” maximum recommended spacing between mounting clips.

C3A-MTGBRKT-SURF-20 Set of 25 plastic, 20º Mounting clips (screws included) 18” maximum recommended spacing between mounting clips.

C3A-MTGBRKT-SHIELD-BD 6 foot Aluminum mounting shield, bright dip finish. Requires C3A-MTGBRKT-SURF brackets to install fixture into mounting shield. Contact factory for additional finish options.

C3A-MNTSCREW-BRS Non Ferrous Brass mounting screw only for C3R mounting clip. (Meets MRI room requirements)


SYSTEM INTEGRATION ACCESSORIES




DIMENSIONAL INFORMATION

C3D-R (Rigid Platform)

C3D-S (Serpentine Platform)

0.9 in[23 mm]

0.9 in[23 mm]

12.0 in[305 mm]

12.0 in[305 mm]

0.7 in[18 mm]


2 foot

3 foot

4 foot

5 foot

6 foot





0.7 in[18 mm]


(Top View)

90°

0.9 in[23 mm]

0.9 in[23 mm]

12.0 in[305 mm]

12.0 in[305 mm]

0.7 in[18 mm]


2 foot

3 foot

4 foot

5 foot

6 foot





0.7 in[18 mm]


(Top View)

90°

0.9 in[23 mm]

0.9 in[23 mm]

12.0 in[305 mm]

12.0 in[305 mm]

0.7 in[18 mm]


2 foot

3 foot

4 foot

5 foot

6 foot





0.7 in[18 mm]


(Top View)

90°



C3A-MTGBRKT-SURF C3A-MTGBRKT-SURF-20

0.1 in

0.4 in 0.8 in

0.9 in

0.2 in

1.0 in 0.4 in 0.8 in

0.9 in

20° 0.2”

.56”

1.1 in

18” maximum recommended spacing between mounting clips. 18” maximum recommended spacing between mounting clips.



C3A-MTGBRKT-SHIELD

1.8 in

1.2 in1.1 in

0.6 in

27°

RequiresC3A-MTGBRKT-SURF

to install C3R into shield



CLiP 3 dynamic • DMX RGB, RGB-WHITE, RGB-AMBER & TUNABLE WHITE


9.65”

1.3”

2.6”

DMX LED DRIVER(PWR-UNV-EM-96-DMX)

Dimensions

LED

OU

TP

UT

1/R-

2/G-

3/B-

4/W-

Back Enter Up Down

DM

X51

2IN

PU

T

N

L

INP

UT

100-277VA

C

D+

D-

GND

NC

NC

NC

NC

DMX LED DRIVER96W MAX

100V-277V ACPower Input

Digital Display

DMX512Signal Input

Common Output (+)CH 1: R/WW Output (-)CH 2: G/NW Output (-)Common Output (+)CH 3: B/CW Output (-)CH 4: White Output (-)

Back Enter Up Down




Red, Green & Blue channels: Tap to turn o�/on.Press & hold to increase &decrease light intensity.

Scenes 1, 2 & 3: Press and hold to save color.Tap to recall the saved color.

E�ects: Tap to play/pause 10 built-ine�ects. Press & hold to changerunning speed of e�ects.

White channel*: Tap to turn o�/on.Press & hold to increase &decrease light intensity.

Touch color wheel:Touch to select R/G/B

color mix.

Power on/o�

RGB & White Mix*:Tap to select Warm, Natural

or Cool White RGB mixes.

Brightness:Press & hold to increase &

decrease light intensity.

Decrease Brightness:Press & hold to decrease

light intensity.

Touch color wheel:Touch to select color temp.

Cool Channel:Press & hold for cooler white.

Increase Brightness:Press & hold to increaselight intensity.

Zones 1, 2 & 3:Tap to choose zone.Hold down to turn on/o�corresponding zone.

Warm Channel:Press & hold for warmer white.

Power on/o�

Scenes 1, 2 & 3:Press and hold to save scene.Tap to recall the saved scene.

V- D+D-V+ GND

DC INPUT DMX OUTPUT

0.75”

0.4”

1.72”

3.25”2.6”

3.0”

4.75”

Wall Mounted Touch ControllerRGB DMX512

Wall Mounted Touch ControllerTunable White DMX512

Dimensions

*Only works with RGBW �xtures.



V+ GrayR- RedG- GreenB- BlueW- White (RGB-W & RGB-A only)

LED

OU

TP

UT

1/R-

2/G-

3/B-

4/W-

Back Enter Up Down

DM

X51

2IN

PU

T

N

L

INP

UT

10 0-277VA

C

D+

D-

GND

NC

NC

NC

NC

LED

OU

TP

UT

1/R-

2/G-

3/B-

4/W-

Back Enter Up Down

DM

X51

2IN

PU

T

N

L

INP

UT

100 -2 77VA

C

D+

D-

GND

NC

NC

NC

NC

LED

OU

TP

UT

1/R-

2/G-

3/B-

4/W-

Back Enter Up Down

DM

X51

2IN

PU

T

N

L

INP

UT

100 -2 77VA

C

D+

D-

GND

NC

NC

NC

NC

CLiP 3 Power Feed Cable

CLiP 3

CLiP 3

CLiP 3

120 ohm, 1W Resistor

(Supplied with Driver)

For termination of DMX signal.Only use one Resistor on the last driver in line

when using multiple drivers.

Neutral

Line

Neutral

Line

Neutral

Line

V- D+D-V+ GND

DC INPUT DMX OUTPUT

12VDC Out

SuppliedAC/DC

Adapter

100V-240V AC

100V

-277

V AC

100V

-277

V AC

100V

-277

V AC

Neu

tral

(Blu

e)

Line

(Bro

wn)






DMXTouch

Controller(RGB or Tunable White)

Wiring DiagramDMX RGB; RGB-W; RGB-A; TW

Note: White wire from CLiP 3 power feed only usedfor RGB-W and RGB-A. Cap White wire for RGB & TW.




Tempo Industries reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program. Please consult www.tempoindustries.com for the most up-to-date specifications and technical data.

CLiP 3 dynamic • 0-10V WARM DIM

Line/Hot (Black)

120-270 VAC50/60 Hz Line/Hot (Red)

Red/White

Neutral (White)

DC +

DC -

Line (Black)

Ground(Green)

Purple

Gray

0-10V Control + (Purple)

0-10V Control - (Gray)

To CLiP 3Warm Dim

Fixture

0-10V Dimmer SwitchPDS-010-WM-WH

VIN 1 - (Black)

VIN 2 - (Black)

VIN 2 + (Red)

Cool + (Yellow)

Cool - (Blue)

Warm + (Yellow)

Warm - (Blue)

CLiP 3 Power Feed CablePFC-24V-5-F-36

VIN 1 + (Red)Wam DimControl Module

PCM-010-WD

24VDCPower Supply

Ground(Green)

Wiring Diagram0-10V Warm Dim

Neutral (White)

DMX RGB, RGB-WHITE, RGB-AMBER & TUNABLE WHITE • 0-10V …€¦ · • DMX RGB, RGB-WHITE,...

Documents

Transcript of DMX RGB, RGB-WHITE, RGB-AMBER & TUNABLE WHITE • 0-10V …€¦ · • DMX RGB, RGB-WHITE,...