DMC 1000 Digital Media Centerdl.owneriq.net/7/7809b626-06bd-4a0c-a001-2cb177dcdcc7.pdfDMC 1000...

ENG

LISH

DMC 1000 Digital Media CenterOWNER’S MANUAL

ENG

LISH

2083124_HK_DMC_1000_OM_ENG.qxp:34241_DMC250_ENG 15/08/08 10:49 Side 1

2 TABLE OF CONTENTS

3 Introduction4 Terminology6 Features8 Front Panel Controls

10 Front Panel Information Display12 Remote Control Functions14 Rear Panel Connections16 Setup and Connections17 Remote Control18 Digital Audio Connections19 Playback Basics19 Basic Play19 Disc Playback Features20 System Set-up20 Media Library Setup21 DVD Player Setup22 Audio Setup22 Video Setup23 General Setup23 Advanced Setup24 DMC Basics26 Operation32 Troubleshooting Guide34 Technical Specifications35 Appendix37 End User License Agreement

Table of Contents

2

NOTE: This player is designed and manu -factured for compatibility with RegionManagement Information that is encoded onmost DVD discs. This player is designed only for

playback of discs with Region Code 2, or fordiscs that do not contain Region Code infor -mation. If there is any other Region Code on adisc, that disc will not play on the DVD.

Declaration of Conformity

We, Harman Consumer Group, Inc.2, Route de Tours72500 Château-du-Loir,FRANCE

declare in own responsibility, that the product described inthis owner’s manual is in compliance with technicalstandards:

EN 55013:2001

EN 55020:2002

EN 61000-3-2:2000

EN 61000-3-3:1995+A1:2001

EN 60065:2002

Jurjen AmsterdamHarman Consumer Group, Inc.

12/07


INTRODUCTION 3

Introduction

Thank you for choosing the Harman Kardon DMC 1000The DMC 1000 merges a high-end DVD player,including upscaling to 1080p with an HDMI™output, with a media server capable of storing upto 60,000 songs on its 250Gb hard drive.Simultaneous playback of different tracks is possi-ble in up to four zones, or you may link any or allof the zones to each other.

Thanks to Gracenote® MusicID,®* all contentrecorded from a CD to the DMC 1000’s harddrive is identified by album name, artist andgenre, with additional information to show thetitle of each track. Even better, for most popularalbums, the DMC 1000 will display the cover artwhen connected to the Internet. The content isautomatically organized by the identificationfields and by the cover, and you may select it andprogram playlists to suit any mood or occasion.The graphical presentation of system content isavailable in both high-definition and standard-definition outputs, for crisp, easy-to-read displayson any video screen.

To enable you to get the maximum quality fromDVDs, the DVD is equipped with the latest indesign techniques, including advanced 10-bitvideo digital-to-analog converters (DAC) andVideo (composite), S-Video and RGB video (RGBvia SCART) outputs, to ensure that you get all thequality inherent in today’s DVD medium. For optimum playback of NTSC and PAL DVD withcompatible high-definition display devices, DVD isequipped with progressive component video outputs.

When used with an HDMI-compatibleaudio/video receiver and video display, the pro-gram quality is preserved. By passing an uncompressed signal, degradationis virtually nonexistent. And the single-cable connection eliminates the problem of wire management.

If you have not yet upgraded to an HDMI videodisplay, you may still enjoy pristine picture qualitywith the DMC 1000’s precision video DACs,which output a Y/Pr/Pb progressive-scan compo-nent signal and composite and S-video. Thus, no matter what type of video display used, you willsee images that are the closest thing to the original film or performance this side of your local theater.

When playing audio CDs, the playback quality is state-of-the-art, matching that of the finest play-ers available.

In addition to DVD and CD playback, the DMC1000 offers audio and still-image playback fromboth solid-state media cards and USB drives. Youcan even record analog sources such as your oldtapes, cassettes and even vinyl records (with anoptional, external phono preamp) to store virtual-ly any audio content for instant playback. And theDMC 1000 allows content to be transferred fromthe hard drive to the memory cards or a USBdrive, or even a recordable CD. This flexibility lets

you take your music with you in a wide range ofportable players, or in your car.

Additional features of the DMC 1000 includeiPod audio playback through Harman Kardon’soptional The Bridge accessory, with charging andnavigation available to any zone in your system.System control options include the unit’s backlitremote, optional external IR sensor/receivers, RS-232-based control for popular home automationsystems, custom-programmed home networkcontrol and even wireless control through aWindows Mobile®-based PDA when an optionalwireless bridge is connected.

If you have additional questions about this product or its installation or operation that arenot answered in this manual, please contact yourdealer, as he is your best source of local infor -mation.

� Plays a Wide Range of Video and AudioFormats, Including DVD-Video Discs,VCD, Standard CD Audio Discs, CD-R/RW,DVD-R/RW, DVD+R/RW, Audio Discs andMP3 Discs

� DVD playback upscaled to 1080p with HDMI 1.1 output for single-wire connections

� Front- and rear panel USB input forplaying compatible music or image filesfrom portable devices and for recordingmusic files

� Automatically records from CD to inter-nal Media Library (250GB HDD, equal to60.000 songs)

� Streams audio to up to four independ-ent zones simultaneously, allowing dif-ferent areas of the home to enjoyunique programs

� GraceNote music recognition service*for identification of album name, artistand genre, as well as displaying cover art

� Plays audio and video files from, andrecords from a CD to, solid-state mediacards or USB drives

� High-quality video reproduction withpixel-by-pixel processing, progressivescan output and 3/2 pull-down reconstruction

� High-Quality Video Playback 10-BitDACs, Progressive Scan and ComponentVideo Outputs

� Dolby Digital and DTS Data SignalOutput Through Both Optical andCoaxial Digital Audio Connections

� Audiophile-Grade Output DACs for theFinest Audio reproduction

� Easy-to-Use On-Screen NavigationSystem

� Playback of MP3 and Windows® WMAAudio Discs and JPEG image files

� Parental Lock Controls PreventUnauthorized Viewing of Restricted

Movies� Extensive Programming Capability for

Audio and Video Discs� Multiple Options for Language,

Soundtrack and Subtitle Selection� Multiple-Angle Capabilities With

Specially Encoded DVD Discs� Backlit, Ergonomically Designed

Remote Control

READ THIS BEFORE OPERATINGYOUR UNITInstall this DVD-Player in a well ventilated, cool,dry, clean place with at least 10 cm on the top, 10 cm on the left and right, and 10 cm at theback – away from direct sunlight, heat sources,vibration, dust, moisture, and/or cold.Avoid installing this unit where foreign objectmay fall onto this unit and/or this unit may beexposed to liquid dripping or splashing. On thetop of this unit, do not place:

– Burning objects (i.e. candles), as they maycause fire, damage to this unit, and/or personalinjury.

– Containers with liquid in them, as they may falland liquid may cause electrical shock to theuser and/or damage to this unit.

Do not cover this unit with a newspaper, table-cloth, curtain, etc. in order not to obstruct heatradiation. If the temperature inside this unit rises,it may cause fire, damage to this unit, and/or personal injury.

Install this unit near the AC outlet and where theAC power plug can be reached easily.

This unit is not disconnected from the AC powersource as long as it is connected to the wall outlet, even if this unit itself is turned off. Thisstate is called the standby mode. In this state,this unit is designed to consume a very smallquantity of power.

WARNINGTO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, DO NOT EXPOSE THIS APPLIANCETO RAIN OR MOISTURE.

* Music recognition technology and related data are provided by Gracenote. Gracenote is the industry standardin music recognition technology and related content delivery. For more information, visit www.gracenote.com.

ENG

LISH


4 TERMINOLOGY

TerminologySince they share some of the characteristics andtechnology of CD players, many of the terms andoperational concepts used in a DVD player aresimilar to what you may be familiar with from CDplayers and changers, or older video disc formatssuch as Laser Disc. However, if this is your firstDVD product, some of the terms used to describethe features of a DVD player may be unfamiliar.The following explanations should solve some ofthe mysteries of DVD, and help you to enjoy allthe power and flexibility of the DVD format andthe DVD.

With the arrival of DVD, disc data capacity hasincreased dramatically. On a DVD Video disc mostof this capacity is taken up by MPEG 2 video andthe multichannel movie soundtrack in DolbyDigital and/or DTS. This information is compressed.

Aspect Ratio: This is a description of the widthof a video image in relation to its height. A conventional video screen is four units wide forevery three units of height, that’s why the ratio iscalled ”4:3”. Newer wide aspect ratio video displays are 16 units wide for every nine units ofheight, making them more like the screen in amovie theater. The program material on a DVDmay be recorded in either format and, in addition, you may configure the DVD to playback in either format, depending on the features recorded on a disc.

Media Library: The Media Library refers to thecontent stored on the DMC 1000’s internal hard-disc drive. It contains all of the content that youhave transferred to the DMC 1000, includingcopies of audio CDs, captures of audio streamsfrom the Auxiliary Analog Audio Inputs, and MP3audio and JPEG image files transferred frommemory cards, discs or USB drives. The MediaLibrary automatically organizes the content sothat you may view it by track name, album, artist,genre, cover art (when available) or playlists thatyou have created. When a multizone system hasbeen connected, each zone may access differentcontent stored in the Media Library. When con-nected to other properly programmed devices inthe home using the Network Jack or the RS-232Port, the Media Library may be used as a server,allowing you to enjoy content throughout yourhome.

Multizone: A multizone system is used to dis-tribute audio to various rooms in the house sothat the occupants of each room may independ-ently choose different program material. TheDMC 1000 permits up to four different zones tostream audio simultaneously. Multizone control isusually set up by the custom installer, usingeither control devices connected to a home net-work, or devices connected to the DMC 1000’sRS-232 port.

Server: A server is a computer device with alarge amount of storage that delivers content toother devices. The DMC 1000 may be accessedas a server from a home network when appropri-ate devices are connected. When placed in ServerMode, the DMC 1000 may still be used as a serv-er, even though its four zones are inactive.

Zone: A zone is a section of a multizone systemin which all loudspeakers in the zone play thesame source program. By connecting the DMC1000’s audio outputs for a specific zone to amultichannel amplifier, you may include a num-ber of loudspeakers in a variety of room locationswithin the zone. Example: A four-channel amplifi-er connected to the Zone 2 Outputs may power apair of speakers in the living room and a stereoceiling speaker in the connected dining room, sothat you and your guests may enjoy the sameprogram anywhere within the zone.

Component Video: This form of video signaleliminates many of the artifacts of traditionalcomposite video signals by splitting the signalinto a separate luminance channel (the “Y” signal channel) and two color-difference signals(the Pr and Pb signal channels). With a component video connection, you will seegreater picture resolution and eliminate manypicture imperfections such as the moiré patternsoften seen on check-patterned cloth. However, inorder to benefit from component video, you musthave a video display with Y/Pr/Pb componentvideo inputs. Do not connect the componentvideo outputs of the DMC 1000 to the standardcomposite or S-video inputs of a TV or recorder.

HDCP (High-Bandwidth Digital ContentProtection): HDCP is the specification for protecting digitally encoded content from unauthorized copying when it is transmitted froma DVD player (or other video source) to a videodisplay using HDMI or DVI connections. In orderto take advantage of the high-resolution outputof the DMC 1000 via its HDMI output, your dis-play must be HDCP-compliant. Virtually all dis-plays with HDMI inputs are HDCP-compliant, butnot all DVI-equipped displays are. If you areusing the DMC 1000 with an optional HDMI-to-DVI cable or adapter, check the owner’s manualfor your display to determine whether it is HDCP-compliant.

HDMI™ (High-Definition MultimediaInterface™): HDMI is a serial-bus form of communication between the DVD player and thevideo display or audio/video receiver. With 5Gbpsof bandwidth, it is capable of passing uncompressed digital audio and high-definitiondigital video using a single cable. With HDMI, the DMC 1000 is capable of outputting high-resolution (720p or 1080p) video and 5.1-channel Dolby Digital or DTS digital audio,with the convenience of just a single cable connection.

JPEG Files: JPEG stands for the JointPhotographic Experts Group, which developed astandard for compressing still images, such asphotographs. JPEG files may be created on a personal computer by importing images from adigital camera, or scanning printed photographs.These files may be burned onto a compact disc.The DMC 1000 is capable of recognizing JPEGfiles and enabling you to view them on yourvideo screen.

Title: For a DVD, a title is defined as an entiremovie or program. There can be as many chapterswithin a title as the producers decide to include.Most discs include only one title, but some mayhave more than one, to give you a “DoubleFeature” presentation.

Chapter: DVD programs are divided into chapters and titles. Chapters are the sub-sectionsprogrammed into a single title on a disc.Chapters may be compared to the individualtracks on an audio CD.

Terminology


TERMINOLOGY 5

ENG

LISH

Terminology

RGB Video: This is a new form of video signalthat eliminates many of the artifacts of traditional composite video signals by splittingthe signal into the three fundamental colorsRed, Green and Blue (RGB). With an RGB con-nection (via SCART), you will see greater picture resolution and eliminate many picture imperfections such as the moiré patterns oftenseen on checkered patterned cloths. However, inorder to benefit from RGB video, you must havea video display with an RGB compatible SCARTinput.

Progressive Scan: Due to the immense datastorage capacity of DVD, images are nowadaysstored progressively (intact, rather than interlaced). This allow all of the lines in eachframe (odd and even) to be shown at the sametime. DMC 1000 comes with true progressivescan video output resulting in a 40% greaterlight output than a conventional TV and a stun-ningly detailed, high definition image withabsence of visible scanlines and motion artifacts.

WMA Files: WMA (Windows Media® Audio) isan audio compression format that was devel-oped by the Microsoft® Corporation for use withits Windows Media Player. WMA files can beeven smaller in size than MP3 files, while main-taining similar quality. The DMC 1000 is amongthose DVD players capable of playing discs con-taining WMA files. Note that Windows MediaPlayer uses other file formats; however, the DMC1000 is only capable of playing files that end inthe “.wma” extension. See page 27 for more information on WMA file support.

Multiple Angle: DVDs have the capability toshow up to four different views of the samescene in a program. When a disc is encoded withmultiple-angle information, pressing the Anglebutton will enable you to switch between thesedifferent views. Note that at present, few discstake advantage of this capability and, when theydo, the multiple-angle technology may only bepresent for short periods of time within the disc.Producers will usually insert some sort of icon orgraphic in the picture to alert you to the availability of multiple viewing angles.

Reading: This is a message that you will seeafter you´ve loaded the disc and the tray hasclosed. It refers to the fact that the player mustfirst examine the contents of the disc to see if itis a CD or DVD, and then extract the informationabout the type of material on the disc, such aslanguages, aspect ratios, subtitles, number oftitles and more. The slight delay while the contents of the disc are read is normal.

Resume: The operation of the Stop Button onthe DVD works differently from what you areused to on CD players. On a traditional CD player, when you press the Stop button, the unitdoes just that: it stops playback. On a CD player,when you press the start button again, the discstarts from the beginning. With the DVD, however, you have two options when playingDVD discs. Pressing Stop once will stop play-back, but it actually puts the unit in the Resumemode. This means that you can turn the machineoff and, when you press play the next time, thedisc will resume or continue from the point onthe disc where the Stop button was pressed. Thisis helpful if you are watching a movie and mustinterrupt your viewing session but wish to pickup where you left off. Pressing the Stop buttontwice will stop the machine in a traditional manner and, when the disc is played again, itwill start from the beginning.

In resume mode, the cover of the DVD will be displayed, if available. Otherwise, the Harman Kardon screen will appear.


6 FEATURES

High quality video• High Definition Multimedia Interface (HDMI)

for a single wire, digital connection to your HD-Ready screen.

• Advanced sophisticated 10-bit MPEG-2 videodecoding circuits.

• Direct RGB output via SCART (selectable) foroptimum video performance. SCART connectoralso configurable for Composite Video output.

• Pure PAL with NTSC disc due to true NTSC/PALconversion.

• Dual-layer compatibility for extended play DVD.• Progressive Scan component video ouputs

(NTSC and PAL)• Playback of JPEG image files

High quality digital audio• By connecting a DTS (Digital Theater Systems)

or a Dolby Digital decoder, you can enjoy highquality 5.1 digital surround sound from DTS orDolby Digital discs.

• With linear PCM audio at 16-24 bits and 44-96 kHz (also on digital output, see tablepage 16), audio quality exceeding that of CDbecomes possible.

• Optical and coaxial digital audio output.

Inputs• Memory Card Slot 1: SD/MMC, Memory Stick• Memory Card Slot 2: Compact Flash• USB: Flash drive, client devices only• Analog Audio: 2-channel• Remote Control IR

Outputs• Analog Audio:

Zone 1 (main zone): 6-channel (RCA jacks)Zones 2, 3 and 4: 2-channels per zone (RCA jacks)

• Remote Control IR• Digital audio: Coaxial and optical• Digital Audio/Video: HDMI• Analog Video: Composite, S-video and

component, Scart (RGB)

Data and Control Ports• Front- and rear-panel USB jacks for flash drives

and external USB hard drives (client only, FATor FAT32 formats only)

• Proprietary connection for iPod charging,audio* playback and navigation throughHarman Kardon’s The Bridge (sold separately)

• RS-232 port for bidirectional system control• RJ45 Ethernet jack for connection to broad-

band network (required for cover art)• Remote control IR input and output*Requires compatible iPod.

Memory Cards• Slot 1 accepts Secure Digital (SD), Multimedia

Card (MMC) and Memory Stick (compatiblewith Magic Gate) cards. Other card types maybe used with a compatible adapter, but are notguaranteed to be recognized by the DMC1000.

• Slot 2 accepts Compact Flash I (CF) cards, orcards using a Compact Flash 1-compatibleadapter.

• Cards with more than 1GB memory may notwork correctly.

• Video formats supported: MPEG-2 digital videofiles.

Recording Capabilities• Automatically records audio CDs to Media

Library (hard-disc drive)• Recording sources: Media Library, disc player,

memory cards, USB device, analog audio viarear-panel Auxiliary Analog Audio Inputs

• Recording destinations:� Media Library (from any source)� Data CD-R/RW disc, Memory Card installed

in Card Slot 1 or 2 or USB device (only fromplaylist programmed in Media Library)

• Recording speeds: CDs: 16x, AUX: 1x only• Recording quality: lossless (.wav), best (MP3:

320kb/sec), high (MP3: 256kb/sec), medium(MP3: 192kb/sec), basic (MP3: 128kb/sec)

• Recorded format: data files – original format;analog audio – .wav files; audio CDs – formatand sampling rate determined by recordingquality setting

Many convenient features• On-Screen Menu lcons for disc information or

player information and access to many majorfunctions of this unit.

• Subtitles may be displayed in one of numerouslanguages*.

• The multi-angle function allows you to choosethe viewing angle of scenes which were shotfrom a number of different angles (Limited toDVD’s recorded with multiple camera angles.)

• Multiple options for dialog language andsoundtrack selection (limited to DVD’s recordedwith multiple dialog languages or sound-tracks).

• Intuitive menu operating system.• 4 step Zoom (off, x1, x2, x3) play and pause.• Still-image rotation in 90-degree increments• Thumbnail still-image menu• User-selectable slideshow pace: slow,medium,

fast• Backlit, ergonomically designed remote control.• Future software upgrades accessible via

Internet. (See information below.)* The number of languages recorded depends on

the software.

Compatible with CD as well as DVD• The DMC 1000 will play any conventional Audio

CD or recordable (CD-R) or erasable CD (CD-RW), MP3, WMA (v9) or any VCD orDVD/Video with the region code 0 or 2.

Disc formats supported by this playerThe unit can play the following disc formats (8 cm and 12 cm size): • DVD• DVD-R• DVD-RW• DVD+R• DVD+RW• CD• CD-R• CD-RW• VCD• WMA (v9)

NOTE: Due to differences in the format of certain discs, it is possible that some discs mayinclude a mix of features that are not compatiblewith the DMC 1000. Similarly, although the DMC 1000 is capable of a wide range of fea-tures, not all discs include every capability of the DMC 1000 system. For example, although theDMC 1000 is compatible with multi-angle discs,that feature is only possible when the disc is specially encoded for multi pleangle play. In addition, the DMC 1000 is capable of playingback both Dolby Digital and DTS soundtracks, butthe number and types of tracks available will varyfrom disc to disc. To make certain that a specificfeature or soundtrack option is available, pleasecheck the options noted on the disc jacket.

Features


FEATURES 7

ENG

LISH

Features

� Playback capability for CD-R, CD-RW, WMA,JPEG, MP3, VCD/SVCD, DVD-R, DVD+R, DVD-RW and DVD+RW discs may vary due to variations in the quality of the disc and therecorder used to create the disc.

� The DMC 1000 is compatible with most discsrecorded with files encoded using MP3 orWindows Media 8, as well as JPEG stillimages. However, note that variations in theencoder or codec used and the bit rate of theencoding may affect the DMC 1000’s ability toplay back a specific disc. As a result, we cannot guarantee complete compatibility withall encoders and versions of the codecs. Forbest results, we recommend that MP3 files beencoded at bit rates ranging between 32kbpsand 320kbps. WMA files should be encoded atbit rates between 64kbps and 320kbps.Although the DMC 1000 is capable of playingsome WMA 9 files, not all features of version 9 are supported. JPEG files shouldcontain no more than 5 megapixels, and thefile size should be no larger than 5Mb.

The DMC 1000 will NOT play the following:• DVD discs with a Region Code other than 2• DVD-ROM data discs• DVD-RAM discs• DVD-Audio discs• SACD(TM)-discs• CD-I discs• CD-G discs• SVCD discs• Kodak Photo CD™ discs (Kodak Picture CD

discs, available to consumers, may be viewedusing the DMC 1000).

• Discs intended for use in video game consoles.• Discs recorded in the “VR” mode or at any

speed other than “SP”.• High-definition optical discs such as WMVHD,

HD-DVD and Blu-ray.

Memory Card CompatibilityThe following types of memory cards may beused with the DMC 1000:

The DMC 1000 will play most recordable memo-ry cards, but we cannot guarantee complete playback compatibility due to the wide variationin recorders and blank media.We cannot guarantee playback compatibility with cards having a memory capacity greater than 1 gigabyte.

• Both Secure Digital (SD) and MMC (MultimediaCard) memory cards may be used in Card Slot1. The smaller miniSD and microSD cards maybe used in Card Slot 1, but require an adapter(not included).

• Memory Stick cards may also be used in CardSlot 1. Original Memory Stick cards are compatible as is, but an adapter (not included)is required for the smaller Memory Stick Duocards.

• xD-Picture Card may be used in Card Slot 1.

• Compact Flash I cards may be used in CardSlot 2. Compact Flash II cards and microdrivesare not compatible with the DMC 1000.

• Card Slot 1 accepts only SD, MMC and MemoryStick cards. Card Slot 2 accepts only CompactFlash I cards. Do not attempt to install a card ina slot other than the one designated for itscard type.

• Cards with memory capacity greater than 8 gigabyte are not recommended for use withthe DMC 1000.

Card Slot 1Gently insert an SD, MMC or Memory Stick card,label-side up, pushing it all the way in until itclicks. Remove the card by gently pressing it inagain until it unlatches, then you may pull it outof the slot.

Card Slot 2Gently insert a Compact Flash I card, label-sideup, pushing it all the way until it is firmly seatedin the slot. Remove the card by pulling it out ofthe slot.

USB Device CompatibilityClient USB devices, such as flash drives and mostexternal or some portable hard disc drives, maybe connected to the DMC 1000’s front or rearpanel's USB port.

Many recent-model still cameras may also beconnected directly to the DMC 1000 via USB. Ingeneral, cameras or other USB devices that arecompatible with both Windows® and MacintoshOS computers may also be used with the DMC1000.

Do not connect a personal computer directly tothe DMC 1000. Due to their software design, theiPod, most other USB peripheral devices andaccessories – such as card readers, keyboardsand pointing devices – and software-specific dig-ital media players are not compatible with theUSB ports on the DMC 1000, even when placedin disc mode. To enjoy audio materials stored onyour compatible iPod, dock it in The Bridge(optional, and available from your HarmanKardon dealer).

Gently insert the connector end of your USBdevice into the USB Port, being careful to alignthe device’s plastic tongue to slide into the gapunderneath the port’s plastic tongue. Remove thedevice by pulling it out of the port.

Upgradeability via InternetThe ”firmware” controlling the functionality ofthe Harman Kardon DMC 1000 is fully upgradeable. In the event of future improvements to its operations and features, itwill be possible to download firmware upgradesfrom www.harmankardon.com/International/All you have to do is create a CD-R with the dataand insert it in the DMC 1000 for an automaticupgrade.

Packing List1 Harman Kardon DMC 1000 Player

1 Remote control

2 AAA batteries

1 HDMI cable

1 owner's manual

1 Power cord.


8 FRONT PANEL CONTROLS

IMPORTANT NOTE: The DMC 1000’s front-panel controls use advanced touch-sensitivetechnology. To use the front panel, place a fingerover any of the illuminated icons. A gentle tap isall that is necessary. Wait a few seconds for theDMC 1000 to process each command. Toremove fingerprints, wipe the front panel with adry microfiber cloth.

Power: When the DMC 1000 is connected toan AC power source and the rear-panel MasterPower Switch is on, this control will indicate oneof four power states:

• Full-Off Mode (dim blue) – The DMC1000, including its hard-disc drive, is fullypowered down.

• Sleep (Standby) Mode (amber) – TheDMC 1000 will not respond to any commandsother than to power on.

• Server Mode (amber) – The DMC 1000may be controlled via the RS-232 Port or theNetwork Connection, but the on-screen menusystem is off.

• Full-Power Mode (bright blue) – The DMC1000 operates normally.

The description of each mode and the DMC1000’s response to the power controls is shownin Table A7 in the Appendix.

� Main Information Display: This displaydelivers messages and status indications to helpyou operate the DMC 1000 player.

1 Power On/Off (Standby): Press the buttononce to turn the DMC 1000 player on, press itagain to put the unit in the Standby mode.

2 Open/Close: Press this button to open orclose the Disc Tray.

3 Disc Drawer.

4 Play/Pause: Press to initiate playback or toresume playback after Pause has been pressed.Press this button to momentarily pause play-back. To resume playback, press the buttonagain. If a DVD is playing, action will freeze anda still picture will be displayed when the buttonis pressed.

5 Stop: Press this button once to place thedisc in the Resume mode, which means thatplayback will stop, but as long as the tray is notopened or the disc changed, DVD playback willcontinue from the same point on the disc whenthe Play Button is pressed again. Resume willalso work if the unit was turned off. To stop adisc and have play start from the beginning,press the button twice.

6 Skip/Search (Previous): Press this buttonto move backward through the music tracks ona CD disc or the chapters on a DVD disc. Keepthe button pressed to search backwards at oneof the available speeds.

7 Skip/Search (Next): Press to move forwardthrough the music tracks on a CD or the chapters on a DVD disc. Keep the button pressedto search forwards at one of the availablespeeds.

8 Record: When an audio CD is loaded, or theAnalog Audio Inputs are selected as the source,press this button to view the Record tab of theon-screen menu. Pressing this button does notbegin the recording.

NOTE: It is not possible to record from one ofthe memory cards or the USB device to anyother media or to the USB device. It is also notpossible to transfer image or video files.However, an audio signal is always available atthe Analog Audio Outputs. You may make ana-log recordings from any source by connecting ananalog audio recorder to the rear-panel AnalogAudio Outputs.

9 Menu: Press to activate the on-screenmenu system, or to navigate back up one levelin the menu system.

NOTE: It is not possible to select a new sourcewhile the current source is playing or even whileit is paused. Press the Stop Button before select-ing a new source.

� Main Information Display1 Power On/Off (Standby)2 Open/Close3 Disc Drawer4 Play/Pause5 Stop

6 Skip/Search (Previous)7 Skip/Search (Next)8 Record9 MenuA Navigation ButtonsB Front Panel Door

C Card Slot 1D Card Slot 2E USB PortF Remote IR Sensor

1

3

87654 9 A B A

2 � EDCF

1 4 5 6 7 8 2 A 9

3 B � DC EF

Front Panel Controls


FRONT PANEL CONTROLS 9

ENG

LISHA Navigation and Enter Buttons: Use

these buttons to navigate the on-screen menus,and press the Enter Button to select an item.

B Front-Panel Door: Open this door toaccess the two Card Slots and the front-panelUSB Port. To open it, gently press on the trianglein the center of the door until it unlatches; thedoor will drop down. To close the door, removeall media, then press the door closed at thesame center location until you hear the latchclick. To avoid damaging the door, do not openor close it by grabbing the edges.

C Card Slot 1: Insert an SD, MMC or MemoryStick memory card into this slot by gently pushing it all the way in until it clicks. The slotalso accommodates miniSD, microSD andMemory Stick Duo cards when used with theappropriate adapter, available in most electronics and computer stores. Remove a cardfrom this slot by gently pushing it in until itunlatches, then pulling it all the way out of theslot.

D Card Slot 2: Insert a Compact Flash I memory card into this slot by gently pushing itall the way in until it is firmly seated in the slot.Remove it by pulling it all the way out of theslot.

E USB Port: Insert a USB client device’s connector into this port, being careful to correctly align the device’s plastic tongue withthe gap. Do not connect a computer to this port.

F Remote IR Sensor: This sensor receivesinfrared commands from the remote control.Make sure that it is not blocked, although anoptional IR sensor such as the Harman KardonHE 1000 may be connected to serve as an exter-nal sensor when the unit is located in a differentroom, installed behind cabinet doors or whenthe sensor is otherwise blocked. For best results,always point your remote control at the DMC1000’s front panel.

Front Panel Controls


10 FRONT PANEL INFORMATION DISPLAY

Front Panel Information Display

AA

L

BC

D EF

G H PI

J

KM N

O

DMC DVD SVCD USB 1 USB 2 CARD 1 CARD 2 AUX LAN 1A-BALL420ip 720ip 1080ip TITLE V.OFF TRACK CHAP DOLBY DTS HOUR MIN SEC

RAND REP

L

A

B

G DF

K C E NM J H

I

A Source/Disc Type IndicatorsB Playback-Mode IndicatorsC Audio Bitstream IndicatorsD Chapter/Track Number IndicatorsE Time IndicatorsF Title Indicators

G V-OFF IndicatorH Repeat IndicatorsI Message AreaJ Random IndicatorK NetworkL Video Output Indicators

M Angle IndicatorN Parental Lock Indicator

A Source Indicators: One of the Disc-TypeIndicators DMC [the Media Library], DVD, VCD,USB 1 [front], USB 2 [back], Card 1 [SD, MMC,Memory Stick, xD-Picture Card], Card 2 [CF], The Bridge or AUX will light to indicate the cur-rent media source. During a recording both thesource and destination media indicators willlight. Disc-Type Indicators: The DVD, CD, VCD orSVCD indicator will light to show the type of disccurrently being played.

B Playback-Mode Indicators: These indicators light to show the current playbackmode:

B Lights when a disc is playing in the normalmode

H Lights when the disc is in the Fast SearchForward mode. The on-screen banner displayindicates the selected speed (x2, x4, x8, x16)

1 Lights when the disc is paused.

G Lights when the disc is in the Fast SearchReverse mode. The on-screen banner displayindicates the selected speed (x2, x4, x8, x16)

C Audio Bitstream Indicators: When aDolby® Digital, DTS® or linear PCM digital audiosignal is present on the disc, one of these indicators will light.

D Chapter/Track Number Indicators: Whena DVD disc is playing, these two positions in thedisplay will show the current chapter. When aCD disc is playing they will show the currenttrack number.

E Time Indicators: These positions in theindicator will show the running time of a DVD inplay. When a CD is playing, these indicators willshow the current track time, time remaining inthe current track, or the total remaining time onthe disc.

NOTE: The Indicators DEF will also displaytext messages about the DVD’s status, includingLOADING when a disc is loading, POWER OFF when the unit is turned off, andDISC ERROR when a disc not compatiblewith the DVD is put into the play position.

F Title Indicators: These two positions in thedisplay will show the current title number whena DVD disc is playing.

G V-OFF Indicator: This indicator lights whenthe unit's video output has been turned off bypressing the V-OFF button on the remote control.

NOTE: The Video Off command will not affectthe HDMI Output because it may be in use foraudio. Avoid leaving the SETUP MENU on screenfor longer than a minute or two when using theHDMI Output, as the screen saver will not oper-ate on the SETUP MENUS and there is a dangerof “burning in” the image on plasma or CRT dis-plays.

H Repeat Indicators: These indicators lightwhen any of the Repeat functions are in use.

I Message Area: Various messages appear inthis two-line area. During media playback, thetrack count and time are displayed on the upperline, while identifying information scrolls on thelower line, depending on the media type.

J Random Indicator: This indicator lightswhen the unit is in the Random Play mode.

K Network: This indicator lights when theRJ45 jack is connected to a live network.


FRONT PANEL INFORMATION DISPLAY 11

ENG

LISH

Front Panel Information Display

L Video Output Indicators: Either the 576ior 576p indicator will light to indicate whetherthe Component Video Outputs are in progressivescan mode. When the Composite or S-VideoOutputs are in use, this indicator will alwaysindicate the default 576i (interlaced scan) set-ting, even if you attempt to change the OutputResolution setting in the Video Setup menu to ahigher video resolution. When the HDMI Outputis in use, its video resolution will be indicated.The HDMI Output will upscale source materialsto the higher resolution, as indicated in theVIDEO SETUP menu (explained in the InitialSetup section). You may change the Video OutResolution setting to a lower resolution toimprove picture quality using the VIDEO SETUPmenu. As you select a specific HDMI Outputvideo resolution and the DMC 1000 successfullydetermines that the video display is capable ofhandling that resolution, its indicator will lightand will appear briefly in the Message Displayand on screen.

M Angle Indicator: This indicator blinks whenalternative viewing angles are available on theDVD currently playing.

N Parental Lock Indicator: This indicatorlights when the parental-lock system is engagedin order to prevent anyone from changing the rating level without a code.


12 REMOTE CONTROL FUNCTIONS

Remote Control Functions

Q

N

�

�

O

8

H

9

7

F

B

J

I

M

G

6

C

K

0

5

L

P

A

E

4

�

D

�

�

�

3

1

2

�

0

1

2

3

4

5

6

7

8

9

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

�

�

�

�

�

�

�

POWER ON

POWER OFF

SUBTITLE

TITLE

ANGLE

AUDIO

ENTER

OPEN/CLOSE

SETUP

ARROWS

INFO

DISC MENU

PAUSE

STATUS

SKIP/STEP (PREVIOUS)

SKIP/STEP (NEXT)

PLAY

SEARCH/SLOW REVERSE

STOP

SEARCH/SLOW FORWARD

DIMMER

BACK

ZOOM

MENU

FIND

A-B Repeat

V.OFF

LIGHT

NUMERIC KEYS

PLAY MODE

CLEAR

IR EMITTER

VIDEO MODE

RECORD

0 POWER ON: Turns on the player when it isin standby mode (Harman Kardon logo appearson screen).

1 POWER OFF: Turns off the player to stand-by mode.

2 SUBTITLE: When a DVD is playing, press toselect a subtitle language or to turn subtitles off.

Note: Due to the variations in how DVD discsare authored, the subtitle languages displayedby the DMC 1000 may not accurately reflect theactual languages available on the disc. It is recommended that subtitles be selected usingthe disc’s menu.

3 TITLE: When a disc is playing, press tomake the player go back to the first section ofthe disc.

4 ANGLE: Press to access various cameraangles on a DVD (If the DVD contains multiplecamera angles) or to rotate JPEG images.

5 AUDIO: Press to access various audio languages on a DVD (If the DVD contains multiple audio streams).

6 ENTER: Press this button to activate a setting or option

7 OPEN/CLOSE: Press to open or close thedisc tray.

8 SETUP: Press this button to use the DMC 1000’s on-screen menu system to adjustthe player’s configuration settings.

9 ARROW buttons (M /N /K/L): Use tomove the cursor in the OSD. When the Zoomfunction is used with still images, use these but-tons to explore the enlarged image. While view-ing a still image, press the N Button to rotatethe image 90º clockwise, or the M Button torotate it 90º counterclockwise.

A INFO: Press for detailed informations onthe disc playing


REMOTE CONTROL FUNCTIONS 13

ENG

LISH

Remote Control Functions

B DISC MENU: Displays the actual DVD DiscMenu on the TV screen in play mode. Whenplaying discs with JPEG images, pressing thisbutton will access the thumbnails.

C PAUSE: Freezes a picture (with DVD/VCD)and pauses the playback signal (CD) when a discis playing. Press again for normal playback.

D STATUS: Press while a disc is playing toview banner display. Use the ARROW buttons tomove through the different features in theBanner Display.

E SKIP/STEP (Previous): Press to go tobeginning of current track. Press again quickly togo to beginning of previous track. After pressingthe PAUSE button, each press of this button willmove the image in reverse frame by frame.

F SKIP/STEP (Next): Press to go to begin-ning of next track. After pressing the PAUSE button, each press of this button will move theimage forwards frame by frame.

G PLAY: Begins to play disc (closes disc trayfirst, if it is open.)

H SEARCH/SLOW (REV): Allows you tosearch in reverse through a disc while it is inplay mode. Each time you press this button, thesearch speed changes as indicated by a numberof arrows on the right top of your screen.After pressing the PAUSE button, each press ofthis button will change the slow down speedindicated by a number of arrows in the right topof the screen.

I STOP: Stops playing a disc. When a disc isplaying, if you press STOP and PLAY, the disc willresume play, i.e. it will start from the same pointon the disc where the unit was stopped. If youpress STOP twice and the PLAY button, the discwill start play from the beginning.

J SEARCH/SLOW (FWD): Allows you tosearch forward through a disc while it is in playmode. Each time you press this button, thesearch speed changes as indicated by a numberof arrows on the right top of your screen.After pressing the PAUSE button, each press ofthis button will change the slow down speed asindicated by a number of arrows in the right topof the screen.

K DIMMER: Press to change the brightnessof the front panel display or to turn the displayoff completely in the following order: FULLBRIGHTNESS � HALF BRIGHTNESS � OFF � FULLBRIGHTNESS

L BACK: Press this button while viewing theDMC 1000’s Setup menus or Status Display toexit a drop down menu without making a selection. It has no effect on a disc’s menus.

M ZOOM: When a DVD or VCD is playing,press this button to zoom the picture so that it isenlarged. There are 4 steps to the zoom function, each progressively larger. Press througheach of the zoom stages to return to a normalpicture.

N Menu: Press to display the main menu formedia playback and control.

O Find: When browsing content from theMedia Library, press to search for any audiotrack stored on the system’s hard-disc drive.When the Find Track box opens, use the NumericKeys to enter the name of the desired track (seeNumeric Keys description). When a DVD is play-ing, press this button to display a dialog boxthat allows you to directly select a group, title,track or chapter as appropriate to the disc. Withthe correct cell in the dialog box highlighted, usethe Numeric Keys to enter the section of the discfrom which you would like playback to begin (itis not necessary to press the Enter Button). Thedisc will automatically jump to that section. Youmay also use the function to begin playbackfrom a specific time point in the track, chapter orfile, or on the disc (DVDs and CDs), sometimescalled Time Search. With the Time cell highlighted, use the Numeric Keys to enter up tosix digits that indicate the time from which youwould like playback to start. If you enter fewerthan six digits, press the Enter Button to complete the entry, and the disc will immediatelyjump to that point.

PA-B: Press to select section A-B and to playrepeatedly.

Q V.OFF: Press to turn off video output forimproved performance from audio-only discs.Press again to restore video output.

� LIGHT: Press to illuminate remote controller.

� NUMERIC KEYS: Select numbers by pressing these buttons. While managing theMedia Library, these buttons may also be usedto enter letters and punctuation when namingplaylists or content. A character-entry dialog boxwill appear to guide you, as shown in Figure 35on page 28. You may use the M /N /K/LNavigation Buttons to highlight the desiredcharacter key and press the Enter Button repeat-edly until the desired character is displayed inthe text bar at the top of the character-entry dia-log box. You may find it easier to press the corre-sponding Numeric Key to directly select charac-ters. Each press of a Numeric Key cycles throughthe upper- and lowercase letters or symbolsshown on the remote and on screen.

Use the alphabetic keys to jump to desired areasof the Media Library content. Example: Whiledisplaying the Media Library organized by artist,press any letter key to jump to the first artistwhose name begins with that letter.

� Play Mode: Press this button while a discis playing to display the Play Mode dialog box,which allows you to program Random or Repeatplayback and play lists.

� CLEAR: Press to remove the Banner menufrom the screen.

� IR EMITTER: This small, clear button-likedevice sends the IR commands from the remotecontrol to the DMC 1000. To ensure proper performance of the remote control, be sure topoint it toward the unit and do not cover it withyour fingers when sending remote commands.

� Video Mode: Press to cycle through theavailable video output settings. If you inadver-tently change the video setting in the on-screenmenu system and the picture is lost or scram-bled, press this button to return to a settingcompatible with your video display.

� Record: Press this button to open a menuthat allows you to record content from onemedia source to another.

• Audio CDs are automatically recorded to theMedia Library when they are inserted.

• Audio sources connected to the AuxiliaryAnalog Audio Inputs may only be recorded tothe Media Library. You may later transfer thatcontent from a playlist to a memory card, arecordable CD or a USB drive.

• To copy recordings from the Media Library to amemory card, a USB drive or a CD-R/RW disc,first create a playlist of the desired content. Ifthe content was originally imported to the Media Library from a memory card or USBdevice, the DMC 1000 automatically created aplaylist at that time.

• When using the pull-down menus to select arecording source (“From”) and a destination(“To”) only those sources with available con-tent will appear. The Auxiliary Analog AudioInputs will always appear, because the DMC1000 is not capable of detecting the presenceof an audio signal.


14 REAR PANEL CONNECTIONS

Rear Panel Connections

��

� �

��

� � � �

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark & the DTS logos and Symbol are trademarks of DTS, Inc. 1996-2007 DTS, Inc. All Rights Reserved.

� � � �

��

er,9anin

TSS,Re

�

�

Optical Digital Output� Coaxial Digital Output� AC Power Cord� Composite Video Output� S-Video Output� Component Video Outputs� Scart TV Output

� Remote Control Output� Remote Control Input� Zone 2/3/4 Analog Audio Outputs HDMI Output� Zone 1 Analog Audio Outputs� Analog Audio Input� The Bridge Connection

� Network Jack� USB Port� RS-232 Port Master Power Switch� Fan Vent

Optical Digital Output: Connect this jackto the optical digital input of an A/V receiver orsurround processor for Dolby Digital, DTS orPCM audio playback.

� Coaxial Digital Output: Connect this jackto the coaxial digital input of an A/V receiver orsurround processor for Dolby Digital, DTS orPCM audio playback.

NOTE: The coaxial digital output should only beconnected to a digital input. Even though it isthe same RCA-type connector as standard analog audio connections, DO NOT connect it toa conventional analog input jack.

Connect either the Optical Digital AudioOutput or the Coaxial Digital AudioOutput � to a corresponding digital audioinput on your receiver or processor, but not both.

� AC Power Cord: Connect this plug to anAC outlet. If the outlet is controlled by a switch,make certain that it is in the ON position.

� Composite Video Output: Connect thisjack to the video input on a television or videoprojector, or to a video input on an A/V receiveror processor if you are using that type of devicefor video input switching.

� S-Video Output: Connect this jack to theS-Video input on a television or video projector,or to an S-Video input on an A/V receiver orprocessor if you are using that type of device forS-Video input switching.

� Component Video Outputs: These out-puts carry the component video signals for connection to display monitors with componentvideo inputs. For standard analog TV's or projectors with inputs marked Y/Pr/Pb orY/Cr/Cb, connect these outputs to the correspon-ding inputs. If you have a high-definition televi-sion or projector that is compatible with highscan rate progressive video, connect these jacksto the “HD Component” inputs. Note that if youare using a progressive scan display device, then”Progressive” must be selected in the Video Set-up Menu in order to take advantage of the progressive scan circuitry. See page 22 for moreinformation on progressive scan video.

IMPORTANT: These jacks should NOT be connected to standard composite video inputs.

� SCART OUT (TV): If your TV has a SCARTsocket, you can connect a SCART cable to yourTV and to your DMC 1000 Player for improvedvideo quality. The SCART cable carries bothaudio and video. You can select Composite Videoor RGB video for that SCART connector’s videooutput signal.

� Remote Control Output: Connect thisjack to the infrared (IR) input jack of anothercompatible Harman Kardon remote controlledproduct to have the built-in Remote Sensor onthe DMC 1000 provide IR signals to other com-patible products.

� Remote Control Input: Connect the output of a remote infrared sensor, or theremote control output of another compatible Harman Kardon product, to this jack. This willenable the remote control to operate even whenthe front panel Remote Sensor on the DMC 1000 is blocked. This jack may also beused with compatible IR remote control-basedautomation systems.

� Zone 2/3/4 Analog Audio Outputs:When the DMC 1000 is being used for multi-zone operation, connect these jacks to the sepa-rate Zone inputs on your multiroom controller orhub, or the amplifiers feeding the multizone sys-tem.

HDMI Output: If you have an HDMI-com-patible receiver or video display device, connectthis output to an HDMI input on the receiver orvideo display for the highest-quality uncom-pressed digital audio and video available. Even ifyour receiver is not capable of processing audioin the HDMI format, you may still experience thesuperb reproduction of HDMI video.

If your video display has a DVI input, you mayuse an optional HDMI-to-DVI cable or adapterfor the connection to the display. In all cases, thevideo display must be HDCP-compliant in orderto use the HDMI output. For best results, we donot recommend HDMI connections in excess of 3meters..

The following audio formats may be output viathe HDMI connection:

Audio CD – 2-Channel PCM or 5.1-channel DTS

DVD-Video – Up to 5.1-channel Dolby Digital orDTS


REAR PANEL CONNECTIONS 15

ENG

LISH� Zone 1 Analog Audio Outputs: If you are

not using either HDMI or a separate optical orcoaxial digital audio connection for the Zone 1(Main Room) audio, connect these jacks to thematching inputs on your A/V receiver or sur-round processor. Connect the left- and right-channel jacks to the receiver to monitor an ana-log source connected to the Auxiliary Inputs dur-ing recording.

Note: You’ll find more details about allAudio/Video connections under Setup andConnections on the following pages.

� Analog Audio Inputs: Connect these jacksto an audio output on a source player like a tapedeck or record player for analog audio recording.

� The Bridge Connection: To use an iPod*as a source for the DMC 1000, enabling you toselect and listen to audio content and chargethe iPod, connect an optional Harman KardonThe Bridge here.*For iPod models with a dock connector.

� Network Jack: Connect this standard RJ45jack to a broadband network (Ethernet) connec-tion so that you may take full advantage ofGracenote MusicID, including obtaining cover artfor stored albums, updating both the databaseof album information and the system software,and connecting the DMC 1000 to a home net-work. When the network connection is “live,”the lights on either side of the jack will flash toindicate network activity.

� USB Port: This USB port is primarily intend-ed to connect an optional, external USB harddrive to back up the DMC 1000’s Media Library,although it may be used for content playback.DO NOT connect a computer or other hostdevice directly to the DMC 1000.

� RS-232 Port: Connect the DMC 1000 tocompatible system control and automation prod-ucts, using a standard RS-232 cable. As pro-gramming a control and automation system is acomplex task, requiring specific information andtraining, we recommend that you consult atrained installer.

Master Power Switch: Push this switchto the line position (I) to apply power to theDMC 1000, placing it in the “Full-Off” powermode. When the unit will not be used for anextended period of time, or whenever it is neces-sary to remove the unit from the AC power lines,push the switch to the circle position (0) to turnthe unit off.

� Fan Vent: This area contains vents used bythe DMC 1000’s fans to cool the system.Maintain a clearance of at least three inches tothe nearest surface, to avoid overheating theunit.


16 SETUP AND CONNECTIONS

Setup and Connections

Before connecting your DMC 1000,please:� Ensure that the power switch of this unit and

other equipment to be connected is set to offbefore commencing connection.

� Do not block ventilation holes of any of theequipment and arrange them so that air cancirculate freely.

� Read through the instructions before connecting other equipment.

� Ensure that you observe the color codingwhen connecting audio and video cables.

STEP ONE – Placement

Due to the heat generated by other system com-ponents, place the DMC 1000 on its own shelfrather than stacking it directly on another com-ponent. We do not recommend stacking othercomponents on top of the DMC 1000.

STEP TWO – Connect the DMC 1000 to an A/V Receiver or Processor(Preferred)

If the receiver is HDMI-capable and HDCP-com-pliant, connect the HDMI Output to thereceiver’s HDMI Input to carry both audio andvideo.

If the receiver has only a DVI input, use anHDMI-to-DVI adapter, and make a separateaudio connection.

If the receiver does not have an HDMI or DVIinput, select one video connection, in order ofpreference: component video �, S-video � orcomposite video �.

For non-HDMI products, a separate audio conne -ction is also required. If available, connect eitherthe Optical or Coaxial Digital Audio Outputto the corresponding input on the receiver.

The DMC 1000 is capable of outputting up tofour separate analog audio streams for use inmultizone systems. Zone 1 is used for the mainlistening room, and includes six channels.Connect the Zone 1 Analog Audio Outputs � toa receiver that does not have an available digitalaudio input. If digital audio connections havebeen made to the receiver, make an additionalconnection from the FL and FR jacks to thereceiver to monitor an analog source connectedto the Auxiliary Inputs during recording.

STEP THREE – Connect Media Sources

• Auxiliary Analog Audio Inputs �: Connect theline-level or “Tape” outputs of an analogdevice to these inputs. Do not connect aturntable without a phono preamp. Contactthe Harman Kardon Parts Department to pur-chase one.

• The Bridge �: Connect Harman Kardon’s TheBridge (sold separately) here to enjoy contentstored on a compatible iPod (not included).

• USB Devices ��: Connect a compatible USBclient device to either the front- or rear-panelUSB Port. The front-panel port is locatedbehind the dropdown door.

STEP FOUR – Connect the DMC 1000 to a Multizone System (Optional)

The DMC 1000 may be used with up to fourzones simultaneously, with any or all zoneslinked to each other. Zones 2, 3 and 4 are usedto distribute 2-channel audio to other locations.Zone ��1 is the main listening area. The sys-tem may be controlled remotely using theRemote IR Input, the RS-232 Port or a networkconnection.

Connect the Analog Audio Outputs for eachzone in the system to a receiver, processor, multi-zone controller or amplifier.

Connect the RS-232 Port � to a compatiblecontrol device using a standard null modemcable or adapter.

STEP FIVE – Connect the Remote IR Inputand Output

Connect the DMC 1000’s Remote IR Input �to the compatible IR output of another product,or to an IR receiver or controller, such as theoptional Harman Kardon HE 1000. When daisy-chaining devices to allow for remote control upand down the chain, connect the Remote IROutput � to the next product’s IR input. TheDMC 1000 is compatible with “stripped carrier”IR signals.

STEP SIX – Network Connection

Connect the Network Jack � to a router orEthernet-compatible controller. The network con-nection is used by Gracenote MusicID to obtain cover art and database updates via theInternet. When the Network connection is notused, Gracenote MusicID obtains the tags from adatabase stored internally on the DMC 1000’shard-disc drive.To use the DMC 1000 as a serveron a home network, use the Setup menu to lookup the settings automatically generated whenthe DMC 1000 is booted, and program yourhome network devices accordingly.

STEP SEVEN – Plug In AC Power

To avoid possible damage from a transientpower surge at plug-in, switch the Master PowerSwitch to the circle position (0). Plug the femaleend of the AC Power cord into the receptacle,and the male end into an unswitched AC outlet.Due to the DMC 1000’s power requirements, donot plug it into an accessory outlet on anothercomponent.

Connecting to a TV Only (Optional)When using the DMC 1000 with a television butno audio receiver or processor, connect it as follows. Make the Analog Audio Connection� and one of the Video Connections(Composite Video �, S-Video �,Component Video �). If your television orvideo display is HDMI-capable, you only need tomake the HDMI connection, as it handlesboth audio and video. Remember to plug in thepower cord.


REMOTE CONTROL 17

ENG

LISH

Remote Control

Battery installationInsert the batteries supplied while observing thecorrect (+) and (–) polarities.

Service life of batteries� The batteries normally last for about one year,

although this depends on how often, and forwhat operations, the remote control is used.

� If the remote control unit fails to work evenwhen it is operated near the player, replacethe batteries.

� Use size “AAA” batteries.

Notes:� Do not attempt to recharge, short-circuit,

disassemble, heat or throw the batteries intofire.

� Do not drop, step on or otherwise impact theremote control unit. This may damage theparts or lead to malfunction.

� Do not mix old and new batteries.

� Wipe away any leakage inside the remotecontrol unit, and install new batteries.

� If leakage should come into contact withparts of your body, wash it off thoroughlywith water.

� Batteries contain chemical substances and werecommend that you dispose of them properlyand in compliance with any local regulations.Do not simply throw them away but return toyour dealer or special battery disposal centers.

Remote control operation rangePoint the remote control unit from no more thanabout 7 m from the remote control sensor andwithin about 60 degrees of the front of the unit.

� The operating distance may vary according tothe brightness of the room.

Notes:� Do not point bright lights at the remote

control sensor.

� Do not place objects between the remotecontrol unit and the remote control sensor.

� Do not use this remote control unit whilesimultaneously operating the remote controlunit of any other equipment.


18 DIGITAL AUDIO CONNECTIONS

Digital Audio Connections

Audio output from the unit’s optical/coaxial digital audio output connectorGently push the cable plug through the built-inshutter that covers the optical digital audio output and connect the cable firmly so that theconfigurations of both the cable and the connector match.

Disc Sound recording Optical/coaxial digitalformat audio output

DVD Dolby Digital Dolby Digital bitstream (2-5.1ch) or PCM (2ch, 48kHz, 16-bit)††

Linear PCM Linear PCM (2ch) (48/96kHz, (48/96kHz, 16/20/24-bit) 16/20/24-bit)

DTS Bitstream or no output*

MPEG (2.0) MPEG bitstream (2ch)or linear PCM(2ch, 48kHz)

VCD MPEG-1 Linear PCM*CD-DA

CD Linear PCM Linear PCM (44.1kHz sampling)

MP3 Linear PCMMPEG-1 (44.1–48kHz,Audio depending onLayer 3) source, if digital

output formatselected as“Bitstream”).(48kHz if digital output format selected as “PCM”)

WMA Linear PCM(Windows (32–48kHz)Media Audio)

* Digital Format must be selected as “BITSTREAM“ or ”PCM” respectively in Menu

For your reference:� Dolby Digital (AC-3) is a digital sound

compression technique developed by theDolby Laboratories Licensing Corporation, supporting 5.1-channel surround sound, aswell as stereo (2-channel) sound, this technique enables a large quantity of sounddata to be efficiently recorded on a disc.

� Linear PCM is a signal recording format usedin CDs. While CDs are recorded in 44.1kHz/16 bit, DVDs are recorded in 48kHz/16 bit up to 96kHz /24 bit.

� If you have a Dolby Pro Logic Surrounddecoder connected to the DVD’s analogAUDIO OUT connectors, thanks to the”Downmix” function of the DVD you willobtain the full benefit of Pro Logic from thesame DVD movies that provide full 5.1-chan-nel Dolby Digital soundtracks, as well as fromtitles encoded with Dolby Surround.

� The DVD is designed to digitally output 96kHz-PCM audio with a 96kHz samplingrate. However, some 96kHz DVD's mayinclude copy protection codes that do notpermit digital output. For full 96kHz fidelityfrom these discs, use the analog outputs ofthe DVD.

IMPORTANT: If your surround processor/D/Aconverter does not support 96kHz PCM audio,you must use the DVD analog outputs for full 96kHz fidelity with these discs.

Caution for the optical/coaxialdigital audio outputs:� When connecting an amplifier (with an

optical/coaxial digital input ) which does notcontain a Dolby Digital (AC-3) or DTSdecoder, be sure to select ”PCM” as initialsetting in the ”Digital Output” menu (seealso page 19).Otherwise, any attempt to play a DVD maycause such a high level of noise that it maybe harmful to your ears and damage yourspeakers.

� CD’s can be played as they would normally be played.

Note:� Some first generation DTS decoders which do

not support DVD-DTS interface may not workproperly with the DMC 1000 player.

� Dolby Digital, DTS and PCM signals arepassed through the HDMI Output . Audio materials.

Notes when connecting the optical digital audio cable(optional)� Gently push the cable plug through the

built-in shutter that covers the optical digitalaudio output and connect the cable firmly sothat the configurations of both the cable andthe connector match.

Dolby Digital and DTSBoth Dolby Digital and DTS are audio formatsused to record 5.1-channel audio signals ontothe digital track of film. Both of these formatsprovide six separate channels: left, right, center,left rear, right rear, and common subwoofer. The latest 6.1-formats, Dolby Digital EX and DTS ES, even one (or two) additional "SurroundBack" channel for a center between the rears.

Remember, that Dolby Digital or DTS will onlyplay 5.1-channel sound if you’ve connected theoptical or coaxial output of the DMC 1000 play-er to a DTS or Dolby Digital receiver or decoderand if the disc was recorded in the Dolby Digitalor DTS format.


PLAYBACK BASICS 19

ENG

LISH

Playback Basics

Basic PlayPreparation1. Switch the TV ON and select its video input

connected to the DMC 1000.

2. Press POWER to turn on the unit, the DMC 1000 harman/kardon logo should appearnow on the screen. If that logo appears distorted on the screen or without any color,change the appropriate settings at the VideoSetting Sub menu according to your TV set andto the connection used between the DMC1000 and your TV.

3. When you see no video at all, not even the harman/kardon logo, check the setting of thevideo input used on your TV (most SCARTinputs on TVs can be configured in the TV´smenu). When you don´t succeed, connect yourTV with different cables to the DMC 1000, e.g.via Composite (yellow jacks) or S-Video cables,rather than per SCART to view the setupmenus until all appropriate ”Video menu” settings are made properly.

4. Switch on your A/V system’s power, if the player has been connected to such a system.

5. Press OPEN/CLOSE to open the disc tray.

6. Place a disc on the disc tray.

Hold the disc without touching either of its surfaces, position it with the side you wish to playfacing down, align it with the guides, and place itin its proper position.

� 3" (8 cm) discs or 5" (12 cm) discs can beused.

7. Press PLAY. The disc tray is automatically closedand play begins.

� When the disc tray is closed by pressingOPEN/CLOSE, play will start automatically.

� With most DVD’s, a Disc Menu appears on thescreen. Select specific menu item by usingARROW buttons on the remote, then pressENTER.

Disc Playback FeaturesSkipping tracks or titles/chaptersTo move forward or backward through the trackson a CD or the titles or chapters on a DVD, pressskip on the front panel or Previous/Next on theremote.

Fast Motion Playback/Fast Search1. To move forward or backward through the

DVD or CD disc being played at fast speed,press SEARCH on the remote. Once one ofthese buttons is pressed, the fast search willcontinue until PLAY is pressed.

There are four fast-play speeds. Each press of theSEARCH Buttons will cycle to the next speed inthe following order: x2, x4, x8, x16, x32, indicated by a number of arrow indicators on theright top of the screen.

2. Press PLAY at any time to resume normal playback.

Note that there will be no audio playback duringfast-forward or -reverse play of DVD discs. This isnormal for DVD, as A/V receivers and surroundprocessors cannot process the digital audiostreams during fast-play modes; audio will beheard during fast-play of conventional CD’s.

Freeze Frame and Frame Advance (with DVD only)1. Press PAUSE when a DVD is playing to freeze

the picture.

2. Each time you press one of the STEP (FWD orREV) buttons, the picture advances one frame.

3. Press PLAY to resume normal playback.

Slow Motion Playback (with DVD only)1. When a DVD disc is in pause or freeze frame

mode, you may move slowly forward or back-ward through the program being played at oneof the speeds by pressing the Slow Buttons onthe remote. Each press of the buttons willmove to the next speed, indicated by a numberof arrow indicators on the right top of thescreen.


Note that there will be no audio playback duringslow-forward or -reverse play of DVD discs. This isnormal for DVD, as A/V receivers and surroundprocessors cannot process the digital audiostreams during slow modes. Slow play is notavailable for CD.

Notes: Playback features may not be availableduring the opening credits of a movie. This isintended by the disc author and is not a failure ofthe DMC 1000.

Playback of a DVD with 96kHz/24-bit audiorequires the use of circuitry normally used forother features. Accordingly, Slow Play Reverseand Step Advance features are not available withthese discs.

Depending on the structure of a VCD disc, thefunctions Slow Reverse and Step Reverse may beprohibited or have no function and Fast Playback(Search) may not function.


20 SYSTEM SETUP

System Setup

Turn On the DMC 1000

The DMC 1000 has four power states, eachdesigned to minimize unnecessary power con-sumption.

The description of each mode and the DMC1000’s response to the power controls is shownin Table A7 in the Appendix.

IMPORTANT NOTE: When the HDMI Output isused, turn on the system components in reverseorder, starting with the video display, then anyreceiver or processor, and finally turn on the DMC1000.

The first time the system is used, turn it on as fol-lows:

Switch the Master Power Switch to the line posi-tion (I), placing the DMC 1000 in Full-Off powermode.

The “Start DMC 1000” message will appear onthe front panel, and the “Starting . . . ” messagewill appear on screen. Allow the system a fewminutes to fully start up.

The first time the DMC 1000 is turned on, theEnd User License Agreement (EULA) will appear.See Figure 1. The unit will not respond to anyother commands until you have scrolled throughthe entire agreement, and accepted its terms. Acopy of the complete EULA appears in the back of this manual, starting on page 37.

Figure 1 – End User Agreement

After you have accepted the EULA, the MainMenu will be displayed.

Figure 2 – Main Menu

The Main Menu is the usual starting point foreach listening or viewing session.

Display the Setup Menu

The first time the system is used, the Setup Menushould be configured. After Initial Setup is com-pleted, unless the user’s requirements change, it is usually not necessary to revisit the SetupMenu. Press the Setup Button to display the SetupMenu (see Figure 3).

Figure 3 – Media Library Setup Menu

The Setup Menu, as with all menus on the DMC1000, is navigated using the F/G/D/E NavigationButtons. Press the Enter Button to select an itemhighlighted on screen.

There are six Setup Menus: Media Library, DVDPlayer, Audio, Video, General and Advanced.

Media Library SetupThe Media Library Setup Menu determines whataction the DMC 1000 takes when an audio disc isloaded. Any time an audio CD is loaded, it is auto-matically copied at high speed to the MediaLibrary. The DMC 1000 does not play audio CDsdirectly from the disc; playback is from the MediaLibrary.

Audio Disc Insert Preferences: Select RecordOnly to copy the disc to the Media Library withoutplaying it, or Play and Record to begin playbackfrom the Media Library after recording com-mences.

Audio Encoding Quality: Select the format tobe used for recording audio CDs to the MediaLibrary.

• Basic (MP3: 128kb/sec)

• Medium (MP3: 192kb/sec)

• High (MP3: 256kb/sec)

• Best (MP3: 320kb/sec)

• Lossless (.wav)


SYSTEM SETUP 21

ENG

LISH

System Setup

DVD Player Setup

Figure 4

The DVD Player Setup menu (shown in Figure 4)contains settings that affect DVD playback. Theother media sources are not affected by thesesettings.

The DMC 1000’s Setup menu screens follow thesame basic format.Select a menu by highlighting its tab on the leftside of the screen. The menu’s settings will bepreviewed, but you will not be able to make anychanges. See Figure 2. Press the Enter Button tomake adjustments to the menu.

The first setting in the menu will automatically beselected. If you wish to change its value, pressthe Enter Button to view the available options ina dropdown menu. Use the KL Buttons to highlight the desiredoption, and press the Enter Button to select it.

If you wish to close the dropdown menu withoutchanging the setting, press the Back Button.

The DVD Player Setup Menu contains the following settings.

Preferred Subtitle Language: Defines yourpreferred subtitle language. Every time a disc willbe played that contains this subtitle language, itwill be shown automatically. If you do not findyour preferred language in the list of options, youcan select your preferred language by highlight-ing OTHER. Press ENTER and use the NavigationButtons to select your preferred language fromthe list shown on the screen. Note that onlythose languages will be available that are actual-ly on the DVD you would like to play. You canalso set the preferred subtitle language to OFF. Inthat case no subtitles will be shown.

Preferred Audio Language: Defines your preferred audio language. Every time a disc isplayed that contains this audio language, it willbe activated automatically. If you do not find yourpreferred language in the list of options, you canselect your preferred language by highlightingOTHER. Press ENTER and use the NavigationButtons to select your preferred language fromthe list shown on the screen. Note that onlythose languages will be available that are actual-ly on the DVD you would like to play.

Parental Control: Defines a password used tocontrol viewing of restricted programs. The fivestandard US rating symbols are ”G” (General,level 2), ”PG” (Parental Guidance, level 4),”PG13” (Parental Guidance and 13 years old,level 4), ”R” (Restricted, level 6) and ”NC 17”(from 17 years old, level 7). The DVD will accom-modate a total of eight rating steps, as set by theDVD creators. These additional steps allow formore critical control of program playback for allaudiences. Level 8: All DVDs can be played. Levels7 to 2: DVDs for general audiences/ children canbe played. Level 1: DVDs for children can beplayed; DVDs for adults/general audiences areprohibited. Follow the explanations on the screento set a new password.

Video Presentation Mode: Select Original todisplay videos and pictures in their native aspectratio, or Full when the DMC 1000 is connected toa 4:3 aspect ratio display.

When Full is selected, 16:9 materials will appearon 4:3 displays in “letterbox” format, with blackbars at the top and bottom of the screen. On16:9 displays, 16:9 materials will fill the screen,but 4:3 materials will appear with black or graybars on the left and right sides of the screen.

NOTE: The DMC 1000’s own menu screens arealways output in widescreen (16:9) mode at amaximum resolution of 720p, depending on thedisplay’s capabilities. When viewed on a 4:3 dis-play, the menu screens will appear in letterboxformat.

Dynamic Range Compression: When playingspecially encoded Dolby Digital DVDs, turn onDynamic Range Compression to reduce the levels of louder passages while maintaining the intelli-gibility of dialog and softer passages. This featureis useful to avoid disturbing others while watch-ing action-packed DVDs. This is similar to the“Night Mode” function on many DVD playersand A/V receivers.

DVD Bass Management: If all six of the Zone1 Analog Audio Outputs are connected to areceiver or processor that does not perform bassmanagement on its 6-channel audio inputs, turnthis setting on and configure the speaker settingsin the Audio Setup menu.

If the receiver is capable of analog bass manage-ment, leave this setting in the default Bypassmode and configure the receiver’s speaker set-tings. When this setting is off, the DMC 1000speaker settings will have no effect.

Select the Stereo/LtRt setting to output a 2-chan-nel recording, or a downmix of a surround-encod-ed program, through the Left- and Right-Channeljacks of the Zone 1 Analog Audio Outputs. Whenthe Bass Management setting is set to either ofthe other settings, these jacks will only output thefront left- and right-channel information, omittingthe center and surround information.

NOTE: The Stereo setting is required when eitherthe Digital Audio Out Format or HDMI Audio Outsettings in the Audio Setup menu are set toUncompressed (i.e., output a 2-channel PCM sig-nal).

Content Play Mode: This setting compensatesfor disc authoring errors that occur when theframe rate is not properly maintained during theconversion from film to video. It only affects pro-gressive scan display using the HDMI Output orthe Component Video Outputs. Three choices areavailable:

• Auto: This is the recommended setting. TheDMC 1000 analyzes the signals from the DVD,determines whether it was originally recordedon video or shot on film, and adjusts the outputaccordingly.

• Film: Choose this option for material that wasoriginally shot on film, even though you areviewing it on video via a DVD.

• Video: Choose this option for material thatwas shot directly to video, such as concerts andsports programming.


22 SYSTEM SETUP

Audio SetupEach setting applies to a certain type of audiooutput, but only for Zone 1. The audio output toZones 2, 3 and 4 is always full-range, 2-channelanalog line level.

Figure 5 – Audio Setup Menu

Speaker Setup: A dialog box appears, allowingyou to program the Speaker Size settings usedwith the Zone 1 (6-Channel) Analog AudioOutputs. The settings are dependent on the DVDBass Management setting in the DVD PlayerSetup menu.

• DVD Bass Management Bypass: This is thedefault system setting, and should be usedwhen the receiver or processor is capable ofperforming bass management. Configure thespeaker settings on the receiver. All mainspeakers default to the Large (full-range) set-ting, and the subwoofer is on. These settingsmay not be changed.

• DVD Bass Management On: Use this settingif the receiver is not capable of performing bassmanagement, to ensure that the low frequen-cies steered to each channel match the fre-quency-response capabilities of the speakers.

� The default settings are Small (only fre-quencies of 200Hz and higher are passed)for all of the main speakers, and the sub-woofer is on.

� With the left and right speakers set toLarge, the center speaker may be set toSmall or None, but not Large. Change theCenter and Surround settings to None forstereo mode when listening to 2-channelrecordings. The subwoofer will remain on.Use this configuration when you desire theadded power of a separate subwoofer forthe low frequencies.

� Change the left and right speaker settingto Small when using a speaker system con-sisting of small satellites and a subwoofer.The Center and Surround settings willautomatically change to Small, and theSubwoofer setting will remain on; neithersetting may be changed.

• DVD Bass Management Stereo/LtRt: Usethis setting to output a 2-channel signal with-out a separate low-frequency channel for thesubwoofer. The front left and right speakersdefault to the Large (full-range) setting, withthe center, surround and subwoofer speakersall disabled. These settings may not bechanged.

Select Save when you have finished your adjust-ments, or Cancel to return to the Audio SetupMenu without making any changes.

Digital Audio Out Format: If your systemincludes 5.1 digital audio surround decoding(Dolby Digital and/or DTS), select Compressed asthe digital output. In that case all audio signalswill be output with their original format. If yoursystem only includes stereo and/or Dolby ProLogic, select Uncompressed. Then all audio sig-nals will be output in PCM format only (DTS willoutput no signal).

HDMI Audio Out: This setting determines theformat of the audio output via the HDMI Output.It is dependent upon the capabilities of yourreceiver or video display (if the DMC 1000 is connected directly to a display). We recommendthat you leave it at the Auto setting, in whichcase the DMC 1000 will communicate with thedevice it’s connected to and automatically selecta setting that is compatible with that device.

• Auto: This is the default setting, and it is recommended that you leave the HDMI AudioOut line at this setting. The DMC 1000 willautomatically select the correct setting, basedon the capabilities of your receiver or video dis-play.

• Uncompressed: At this setting, all digitalaudio is decoded and output as PCM streams.For example, a DVD with a Dolby Digital sound-track will be decoded, and 5.1 PCM streams(one per channel) will be output through theHDMI Output for playback by your receiver.

• Compressed: This setting may be used withreceivers that are capable of decoding digitalmultichannel formats from the HDMI stream.

• Off: Use this setting if your receiver is notcapable of processing the audio portion of theHDMI stream and you have made a separatedigital audio connection from the DMC 1000 tothe receiver. No audio will be passed to theHDMI Output.

IMPORTANT NOTE: When the HDMI Output isactive for audio, the Optical and Coaxial DigitalAudio Outputs are muted. If the HDMI Output isbeing used for video only and the S/P-DIF outputsare required for audio, turn the HDMI Audio Outsetting Off.

Video Setup

The Video Setting Submenu contains the following settings. Follow the explanations in theInstruction Line on the bottom of your screen tochange the settings.

These settings are usually set automatically bythe DMC 1000, depending on which video out-put is in use. See Figure 6.

Figure 6 – Video Setup Menu

Video Output: When both the analog videooutputs and the HDMI Output are connected,select the desired video output. Both HDMI andthe analog video outputs are not available simul-taneously. Example: The HDMI Output is connect-ed to a display in the main listening room andthe Composite Video Output is being distributedto a multizone system.

System Setup


SYSTEM SETUP 23

ENG

LISH

System Setup

Output Resolution: This setting may be used tochange the video output resolution. It affects theComponent Video Outputs and the HDMI Output,but with different allowed settings dependingupon whether the HDMI Output is in use. Thissetting may also be changed by pressing theVideo Mode Button on the remote repeatedly tocycle through the available settings options.

• HDMI Output In Use: With the HDMI Outputconnected to another device, this settingdefaults to Auto, but you may change it to576p, 720p, 1080i or 1080p. We recommendleaving the setting at Auto, in which the DMC 1000 sets the video output based on thecapabilities of the device it is connected to. Ifyou attempt to select a video output resolutionthat your video display is not capable of han-dling, such as 1080p for a display that is only1080i-capable, you will not see a picture.

• HDMI Output Not In Use: When no device isconnected to the HDMI Output, this settingonly applies to the Component Video Outputs.Only two values are available: 576i (thedefault) and 576p. Select 576p only if yourvideo display’s component video inputs arecapable of handling a progressive scan signal.If it isn’t, you will see no picture or a distortedpicture when this setting is changed to 576p. Inthat case, press the Video Mode Button on theremote to correct it.

Picture Mode: Select from the Normal, Vivid,Sport and Nature picture settings to optimizeviewing of various types of programs. This settingis a matter of taste, and there is no incorrect set-ting.

Video Noise Reduction: We recommend thatyou leave this setting at the default “Off”. Ifvideo signal noise is observed when usingtheanalog video outputs, turn this setting on toreduce the noise and improve the picture quality.

General SetupThese general system settings should be accessedwith caution. See Figure 7. If you are uncertainabout the proper setting for any of these options,consult with your dealer or installer, or contactHarman Kardon Customer Service atwww.harmankardon.com.

Figure 7 – General Setup Menu

Software Update: When system softwareupdates are released, this setting will be usedduring the installation process. Do not make anychanges here unless instructed to do so.

Date & Time: The first time the DMC 1000 isused, set the local time and date here.

System Information: This setting displays thesoftware version number and the amount ofhard-disc space available. It is informational only.

Advanced SetupThe settings shown in Figure 8 should be usedwith caution. If you have any doubts aboutwhether it is appropriate to change these set-tings, consult with your Harman Kardon dealer orcustom installer.

Figure 8 – Advanced Setup Menu

Backup: This setting is used to back up the sys-tem and Media Library contents to a USB storagedevice.

Restore: This setting is used to restore a backupcopy of the system settings and Media Librarycontents. The existing contents of the MediaLibrary will be erased. Use this feature only in theunlikely event that the hard-disc drive in yourDMC 1000 has been replaced.

Reset Factory Defaults: This setting is used toreturn all of the Setup Menu settings to their fac-tory defaults. They will then have to be reconfig-ured as required for your application. The con-tents of the Media Library are not affected by thiscommand.

Network: When the DMC 1000 is connected toa network, the network settings are identifiedhere. These settings may be used with otherdevices when the DMC 1000 is to be used as amedia server as part of a home network. This fea-ture also allows you to test the network connec-tion to make certain that Internet access is avail-able. Press the “9” key on the remote twice, todisplay the Internet Protocol (IP) address on thefront panel.

Language Selected: Select the display lan-guage for the DMC 1000’s menus here. Choosefrom the default English, or Spanish, French,German or Italian.

Format USB: This command allows you to refor-mat a USB device, which completely erases thecontents of the drive. Exercise great cautionbefore reformatting a drive.

Now that your DMC 1000 has been installed andconfigured, it’s easy to enjoy your favorite audioand video programs from a variety of media,including DVDs, CDs, memory cards, USB drivesand the DMC 1000’s own Media Library.


24 DMC BASICS

DMC Basics

Turning On the DMC 1000

The DMC 1000 has four power states, eachdesigned to minimize unnecessary power con-sumption.

• Full-Off Mode (Dim Blue) – The DMC 1000,including its hard-disc drive, is fully powereddown, but is ready to be turned on using thefront panel or remote control.

• Sleep (Standby) Mode (Amber) – The DMC1000 will not respond to any commands otherthan to power on.

• Server Mode (Amber) – The DMC 1000may be controlled via the RS-232 Port or theNetwork Connection, but the on-screen menu system is off.

• Full-Power Mode (Bright Blue) – The DMC1000 operates normally.

See Table A7 in the Appendix for a description ofeach mode and the DMC 1000’s response to thepower controls.

NOTE: There is technically a fifth state of “nopower,” in which the power cord is unpluggedand/or the rear-panel Master Power Switch isturned off in the circle position (0). However, it is unlikely you will see this situation in normaluse.

Press the front-panel Power Control or remotePower On Button to turn on the DMC 1000when the Power Indicator is dim blue or amber.

When the Power Indicator is bright blue, pressthe front-panel Power Control or remote PowerOff Button to switch to Server Mode (PowerIndicator turns amber), or press and hold eithercontrol to turn the DMC 1000 fully off (PowerIndicator turns dim blue).

When the DMC 1000 is in Server Mode (PowerIndicator is amber and Server Mode message isdisplayed), press the Power Off Button on theremote to switch to Sleep Mode (Power Indicatorremains amber).

Using the DMC 1000

After turn-on, the DMC 1000 will display itsMain Menu (see Figure 9). If the Media Library isloaded with content, any cover art will appear ina mosaic in the background.


From the Main Menu, you may play content fromthe Media Library or select another source for

playback. You may program a Play Queue ofitems for immediate playback, or a Playlist that isstored for later retrieval. Record an audio streamfrom a device connected to the Auxiliary Inputs,or copy a playlist to any of the portable media,including a recordable CD, a memory card or aUSB drive. You may also control audio playbackin up to four separate zones at a time. The DMC1000’s sophisticated yet easy-to-use on-screenmenus will guide you at every stage.

Playing DVDs and CDs

With the DMC 1000 turned on, press theOpen/Close Button on the front panel or remote.Gently place the disc in the tray, making sure toseat it properly. Refer to the Media Compatibilitysection for details on which disc types may beplayed in the DMC 1000. Other disc types willnot play. The DMC 1000 will take a few momentsto read and identify the disc.

If the disc is a DVD, it will automatically beginplaying. Although we recommend using the disc’sown menu system for navigation, audio trackselection and subtitle language selection, see theDVD Playback section for instructions on usingthe DMC 1000’s commands for these functions.

If the disc is an audio CD, the DMC 1000 willautomatically copy it to the Media Library at highspeed, displaying the progress of the recordingas a percentage. The DMC 1000 is capable ofplaying back the recording almost as it is beingmade (if your unit has been set up for Play andRecord operation). Once the recording is com-pleted, you may remove the disc and continue tolisten to the content as it is played from theMedia Library.

When a CD or other music content is added tothe Media Library, the DMC 1000 accessesGracenote MusicID, which includes a vast onlinedatabase containing identifying information foralmost every commercial CD in existence, as wellas cover art for the vast majority of CDs. Thispowerful service enhances the listening experi-ence, as the user is able to view album, artist andtrack information and the cover art during play-back. This information is then stored in theMedia Library. A copy of the database resides inthe DMC 1000 so that even when it is not con-nected to the Internet, the identifying informa-tion for most popular CDs (except for cover art) isretrieved and stored with the audio in the MediaLibrary. However, for the latest and most com-plete version of the database, we recommendconnecting the DMC 1000 to a high-speedInternet access point. Music recognition technol-ogy and related data are provided by Gracenote.Gracenote is the industry standard in musicrecognition technology and related content deliv-ery. For more information, visitwww.gracenote.com.

NOTE: When no cover art is available, the DMC1000 will display a generic musical-note icon.This may occur if the DMC 1000 is not connectedto the Internet, if a noncommercial disc is loaded,

or in rare instances when there is a gap in thedatabase.

DVD Playback

The DMC 1000 supports all of the features andoptions of standard DVDs. However, not all discsoffer each option at all times. If the “FunctionProhibited” icon (Ø) appears, then you areattempting a function that is not available at thattime or with that media, and it does not indicatea problem with the DMC 1000.

Disc Playback Features

Skipping tracks or titles/chapters

To move forward or backward through the trackson a CD or the titles or chapters on a DVD, pressskip on the front panel or Previous/Next on theremote.

Fast Motion Playback/Fast Search

1. To move forward or backward through theDVD or CD disc being played at fast speed,press Search on the remote. Once one of thesebuttons is pressed, the fast search will contin-ue until Play is pressed.

There are four fast-play speeds. Each press of theSearch Buttons will cycle to the next speed in thefollowing order: x2, x4, x8, x16, indicated by anumber of arrow indicators on the right top ofthe screen.

2. Press PLAY at any time to resume normal playback.

Note that there will be no audio playback duringfast-forward or -reverse play of DVD discs. This isnormal for DVD, as A/V receivers and surroundprocessors cannot process the digital audiostreams during fast-play modes; audio will beheard during fast-play of conventional CD’s.

Freeze Frame and Frame Advance (with DVD only)

1. Press PAUSE when a DVD is playing to freezethe picture.

2. Each time you press one of the STEP (FWD orREV) buttons, the picture advances one frame.


Slow Motion Playback (with DVD only)

1. When a DVD disc is in pause or freeze framemode, you may move slowly forward or back-ward through the program being played atone of the speeds by pressing the SlowButtons on the remote. Each press of the buttons will move to the next speed, indicatedby a number of arrow indicators on the righttop of the screen.


Note that there will be no audio playback duringslow-forward or -reverse play of DVD discs. Thisis normal for DVD, as A/V receivers and surroundprocessors cannot process the digital audiostreams during slow modes. Slow play is notavailable for CD.


DMC BASICS 25

ENG

LISH

DMC Basics

Notes: Playback features may not be availableduring the opening credits of a movie. This isintended by the disc author and is not a failure ofthe DMC 1000.

Playback of a DVD with 96kHz/24-bit audiorequires the use of circuitry normally used forother features. Accordingly, Slow Play Reverseand Step Advance features are not available withthese discs.

Depending on the structure of a VCD disc, thefunctions Slow Reverse and Step Reverse may beprohibited or have no function and Fast Playback(Search) may not function.

Chapters and Titles

DVDs contain one or more features organized astitles. We recommend selecting titles using thedisc’s menu system, where they are identified by name.

Because titles can run for several hours, they aregenerally divided into chapters, each of which istypically no more than a few minutes long,encompassing one or more scenes. Chapterselection allows you to go straight to yourfavorite section of the movie, or to easily skippast sections you’ve already viewed. Most discsoffer a chapter selection menu that includesthumbnail images for easy identification.

To select a chapter or title by number, press theFind Button on the remote to display the FindMenu. See Figure 10. Pressing any Numeric Keywill also display the Find Menu, with the numbershown in the Chapter cell. Press the Enter Button

to jump directly to that chapter.

Figure 10 – Find Menu

To select a title by number, navigate to the Titlecell, enter the title number and press the EnterButton.

To begin play from a specific time location withinthe title, also known as “Time Search,” navigateto the Time cell and enter the desired startingpoint. Press the Enter Button, and play willimmediately begin at the selected time.

You may also select a title or chapter, using theStatus Display.

Using the On-Screen StatusDisplayWhen a DVD is playing, you may press theStatus Button D at any time to view a quicksummary of the disc’s playback status. The StatusBar not only gives you a snapshot of the unit’scurrent state; it also provides an easy way toselect a different title, chapter or track, or use thetime search feature.

Figure 11 – Status Display

• Title: This displays the current title on the left, and the total number of titles on the discon the right.

• Chapter: This displays the current chapter onthe left, and the total number of chapters onthe disc on the right.

• Time Display: This section of the displayshows the time corresponding to the type ofdisplay indicated in the Time Display Type.The Time Search function enables you to startplayback at any point in the program. Use theM N Navigation Buttons 9 to highlightthis display, and the numbers will change todashes. You may then use the Numeric Keysto enter the numbers corresponding to thetime on the disc at which you wish play tocommence. Press the Enter Button 6, andplay will immediately begin at the selectedtime position.

• Time Bar: This display is a graphic representation of the time elapsed for the titlebeing played. As the disc plays, the number ofbars will increase to reflect approximately what percentage of the title has been played thusfar.

Repeat Play: This setting controls whether thetracks are repeated.

Figure 12 – Play Mode Menu

• Track: Repeats the track currently playing untilplay is manually stopped. The “Repeat”Indicators will light in the front-panel display.

• All: Repeats all tracks on the disc until play ismanually stopped.The “Repeat” and “All” Indicators will light inthe front-panel display.

• Off: Normal playback of the current track followed by all remaining tracks on the disc,unless the Random or Programmed play functions have been selected.

A-B Repeat PlayThe Repeat A-B function allows you to select anyportion of a CD and have it repeat continuallyuntil the unit is manually stopped.

Figure 13 – A-B Repeat Display

To initiate a Repeat A-B playback sequence, follow these steps while a disc is playing:

1. Press the A-B Repeat Button P on theremote when you want to choose the begin-ning point; the Repeat icon appears in theupper right corner of the screen, followed byA- to indicate the beginning of the passageto be repeated.

2. Press the A-B Repeat Button P again tochoose the end point. Repeat A-B has beenset, and the A-B section will be played continuously.

3. Press the A-B Repeat Button P on theremote again to cancel Repeat A-B mode.

Video Off FeatureDuring CD playback, some listeners may prefer toturn off the DMC 1000’s video circuitry. Althoughthe video section is electrically isolated from theaudio section, some users may prefer to turn thevideo displays off during audio playback to prevent any possibility of interference betweenaudio and video. You may also wish to turn thevideo display off if you find the menu system distracting or unnecessary during CD playback.

IMPORTANT NOTE: It is strongly recommendedthat plasma video display owners use the VideoOff feature to avoid burn-in.

To turn the video displays off while a CD is playing, simply press the Video Off ButtonQ. Press the button again to restore the videooutput. The V-Off Indicator G will light toremind you that the video displays have beenturned off. Note that the video output will automatically be restored each time the DMC 1000 is turned on.


26 OPERATION

Genres: Displays your library organized intogenres. Select a genre and press the Enter Buttonto view all artists tagged with that genre.

Navigate to the desired sorting option and pressthe Enter Button to view the Media Library (seeFigure 15).

Figure 15 – Media Library

The Media Library lists the items (in this case,albums) in your collection, with the current selec-tion highlighted by a magnifying bar. The coverart, or an icon if the cover art could not befound, is highlighted. Press the Enter Button toexpand the album into a track view.

NOTE: You may have noticed that letters appearabove the Numeric Keys on the remote. The DMC1000 is capable of using alphabetic characters aswell as numbers, which allows you to search theMedia Library by entering the Numeric Key corre-sponding to the first letter of your selection. EachNumeric Key represents three letters. The firstpress jumps to the selections beginning with thefirst letter in the group, and the character-entrydialog box appears. You may enter additional let-ters to refine your search or change the first let-ter by navigating to the Clear command andrepeatedly pressing the Numeric Key until thedesired letter appears in the text bar. Navigate tothe Done command when you have finishedentering a search term. Alphanumeric entry isalso used to edit content tags and to nameplaylists. See Figure 16.

Figure 16 – Character-Entry Dialog Box

Use the F /G Navigation Buttons to scrollthrough the playback options described below.The availability of each of these options andcommands depends on how the Media Library issorted.

• Play Now: The current selection is playedimmediately, replacing other content in thePlay Queue. The Play Queue is a list of contentin line to be played. It is saved until the DMC1000 is powered down to Full-Off mode (dimblue).

• Add to Queue: The current selection is addedto the end of the Play Queue, and the mediacurrently playing continues until it is finished. The Play Queue may be accessed from theMain Menu.

• Add to Playlist: The current selection isadded to a new or existing playlist. A dialogbox will pop up, asking you to select from theexisting playlists or create a new one (seeFigure 17). The DMC 1000 is programmed withseveral empty playlists named to fit differentmoods or occasions, including Dance andDinner. Up to four playlists are shown at atime. The playlists may be accessed from theMain Menu.

Figure 17 – Select a Playlist

• View Artists: Available when the MediaLibrary is sorted by genre, this command dis-plays all artists within the selected genre.

• View Albums: Available when the MediaLibrary is sorted by artist, this commandexpands the current artist to view all of his orher albums in the library.

• View All Tracks: Expands the current albuminto a track view.

• Open Playlist: Available when the MediaLibrary is sorted by playlists, this commandopens the list.

• Edit Name: Available when the Media Libraryis sorted by playlists, this command allows youto rename the playlist if you no longer want touse the name selected when the playlist wascreated.

Operation

Audio Playback From the Media Library

The DMC 1000’s Media Library makes it easy tostore all of your audio content in one place forconvenient playback in your main home theaterroom, in three remote “zones” (if you have set upthe DMC 1000 as part of a multizone system), ona device connected to a home network, or any-where else when you transfer the content toportable media.

When you first turn on the DMC 1000, theassumption is that you will most likely want tolisten to content stored in your Media Library, and the Main Menu (see Figure 14) is configured thatway.


Press the Enter Button to select the highlighted“Play” option, and the DMC 1000 will offer youa variety of sorting options. Large music collec-tions may be easier to manage when sorted byartist or album. As shown in Figure 14, you mayselect from one of six possible sorts, or views, ofthe Media Library.

Cover Art: Displays a mosaic of album coversretrieved by Gracenote MusicID when the DMC1000 is connected to the Internet. Cover artmay be organized alphabetically by name, byartist or in the order added, starting with themost recent additions. As described below, usethe M / N /K/LNavigation Buttons to movethe “magnifying glass” to the desired album,and press the Enter Button to see the playbackoptions.

Tracks: Displays all tracks individually in alpha-betical order. The tracks may be organized alpha-betically by name, artist, album or in the orderadded, starting with the most recent additions.

Artists: Displays all artists in alphabetical order.Select an artist and press the Enter Button toview his or her albums.

Albums: Displays all albums in alphabeticalorder. Select an album and press the Enter Buttonto display its tracks.

Playlists: Displays all playlists you have pro-grammed.


OPERATION 27

ENG

LISH

Operation

• Edit Info: This command is available fortracks and albums only. A dialog box appears,allowing you to edit the identifying informa-tion, including renaming tracks. See Figure 18.The box is slightly different when the MediaLibrary is sorted by tracks. A character-entrydialog box appears when you select any fieldfor editing. See Figure 16 and the note on theprevious page. Select the Find Info commandto activate Gracenote MusicID.

Figure 18 – Edit Info Dialog Box

• Delete: Select this command if you wish toremove the content from the Media Library. Beaware that the DMC 1000 does not play audioCD content directly from the disc. If you loadthe CD again, it will be recopied to the MediaLibrary.

Cover Art Sort

You may have noticed the cover art mosaic thatappears in the background of the Main Menuwhen you turn on the DMC 1000. With the MainMenu on screen, select the Cover Art sortingoption for the Media Library and the focus shiftsto this mosaic. Use the Navigation Buttons to move the “magnifying glass” to the desiredalbum cover, identifying the artist and album.

Press the Enter Button to display the playbackoptions: Play, Add to Queue, Add to Playlist,View Album, Edit Info and Delete Album. SelectView Album to switch to the regular MediaLibrary view with the album expanded to viewthe tracks. The other playback commands func-tion in the same way as in the Media Libraryview.

NOTE: When no cover art is available (e.g., ifthe DMC 1000 was not connected to theInternet when the CD was loaded, if the disc isnoncommercial or if there is a gap in the data-base), the album will not appear in the Cover Artsort, although you may select it when viewingthe Media Library by Tracks, Artists, Albums,Playlists or Genres. A musical note icon, such asthe one shown in Figure 18, will appear in placeof the missing cover art.

Data Media

The DMC 1000 recognizes media containingdata files in the MP3, JPEG and WAV formats.

Load a data CD in the disc player, or insert amemory card in the appropriate card slot, orconnect a USB drive to either USB Port, and thedevice will be available for selection as a mediasource in the Main Menu. See Figure 19.

Figure 19 – Source Selection

When a data source is selected, the only sortingoptions are Audio and Photos. Select one, andthe regular Media Library will appear, exceptthat unlike audio CDs, which are organized asalbums containing individual tracks for eachsong, data sources are organized as folders con-taining individual files for each song or stillimage. However, navigation of the content issimilar to audio. See Figure 20.

Figure 20 – Data CD

Press the Enter Button to expand a folder, orselect the Go Up command to collapse it. Theother commands function as usual, and the Addto Library command allows you to import thecontent to the Media Library for playback afterthe media has been removed from the DMC1000.

The Play Queue and Playlists

The DMC 1000 allows you to program playliststhat are saved for future playback, plus a playqueue of items for immediate play.

The Play Queue

The Play Queue is simply a list of all items thatare queued up to be played. There are two waysto add an item to the play queue:

1. Display the desired content on screen byselecting the correct source (the MediaLibrary, a card slot, a data CD or a USBdevice) and selecting the audio or still-imagecontent. Scroll to the desired content, e.g., asong track or file, use the F/G NavigationButtons to highlight the Play Now command,and press the Enter Button. The existing PlayQueue will stop and add the selected item,which will begin playing immediately. The pre-vious Play Queue items will be deleted.

2. With the desired content on screen and theitem selected, use the F/G NavigationButtons to highlight the Add to Queue com-mand. Press the Enter Button to add the itemto the end of the Play Queue.


28 OPERATION

Operation

To view the play queue, press the Menu Buttonto display the Main Menu, and navigate to thePlay Queue line. Press the Enter Button. The PlayQueue is preserved unless the DMC 1000 ispowered down to Full-Off mode (by pressingand holding the Power Off Button on the remoteso that the front-panel Power Indicator turnsdim blue). If the Play Queue line in the MainMenu is dimmed, the Play Queue has beenerased.

The Play Queue is not available during DVDplayback, or when The Bridge is the mediasource.

You may create playlists that are permanentlysaved by name for future playback.

Programming a Playlist

Playlists are not only a convenient way to store aqueue of your favorite songs, but they arerequired to transfer audio from the MediaLibrary to any of the portable media. See theContent Transfer section for more information.

To program a playlist, display the desired con-tent on screen by selecting the correct source(the Media Library, a card slot, a data CD or aUSB device) and selecting the audio or still-image content. Scroll to the desired content,e.g., a song track or file, use the F/GNavigation Buttons to highlight the Add toPlaylist command, and press the Enter Button.

A pop-up screen will prompt you to select froman existing playlist, to name a new playlist, or toselect an empty prenamed playlist, such asDance or Chill. See Figure 21. If you select oneof the prenamed playlists and have already usedthat name, a number will be added to the end todifferentiate the new playlist. The pop-up dialogbox displays up to four playlists at a time. Scrollup or down to view the remaining playlists.

Figure 21 – Select a Playlist

Playlists may be edited by selecting the PlaylistView from the Media Library. Press the MenuButton to view the Main Menu, and navigate tothe Playlists view in the Media Library. Press theEnter Button, and scroll to the desired playlist.The commands function as expected:

• Play Now: Plays the selected playlist immedi-ately, adding it to the Play Queue.

• Add to Queue: Adds the selected playlist tothe end of the Play Queue.

• Add to Playlist: Adds the selected playlist toa new or existing playlist.

• Open Playlist: Opens the playlist to allowediting of individual tracks, including removinga track from the playlist, changing the track’sorder within the list, selecting the track forimmediate play, adding the track to the Play Queue or a playlist, editing thetrack’s identifying information or deleting thetrack from the Media Library.

• Edit Name: Opens the character-entry dialogbox to rename the playlist.

• Delete Playlist: Deletes the playlist (but notits contents) from the Media Library.

Using

The Bridge is an optional dock that may be usedwith a compatible iPod (not included). When TheBridge is connected to its proprietary input onthe DMC 1000 and the iPod is docked, you mayenjoy the audio and still-image materials storedon your iPod.

When an iPod is docked in The Bridge, the IPODFOUND message will appear on the front panel,and a banner with The Bridge icon and theDetected message will appear on screen. TheiPod will be in “disc mode,” and its screen willdisplay the “OK to disconnect” message. Do not physically undock the iPod while its content isplaying. However, you may select the Undockcommand at any time.

Select The Bridge as the media source from theMain Menu. The menu shown in Figure 22 will

appear.

Figure 22 – The Bridge menu

Navigate the contents of the iPod in a similarmanner to other data media sources. Selectbetween the audio (music) and still-image(photo) content. When Music is selected, youmay sort it using views similar to those in theiPod’s own menu: Playlists, Artists, Albums,Songs, Podcasts, Genres, Composers or AudioBooks.

Only three options are available for iPod con-tent:

Play Now: Begins play of the selected itemimmediately. The Play Queue is erased.

Open: If an individual track is selected, it beginsplay immediately. If the selected item is in anyother category, e.g., an artist or album, this com-mand opens the item so you may view its con-tents.


OPERATION 29

ENG

LISH

Operation

Undock iPod: This command ends play of anycontent on the iPod and returns to the MediaLibrary view of the Main Menu. The iPod’s ownmenu appears on its screen. To resume playback,physically undock the iPod from The Bridge andredock it.

Press the Back Button to return to the previousmenu level, similar to pressing the Menu buttonon the iPod itself.

You may not import content from the iPod to theMedia Library, and you may not add the iPod’scontent to the Play Queue or a playlist. You maynot record from the Media Library to an iPoddocked in The Bridge. These are limitations of theiPod’s design, and do not reflect a problem withthe DMC 1000.

NOTE: The Bridge may not be compatible withsome iPod models, particularly the iPhone andthe iPod touch. To enjoy content stored on thesedevices, connect a cable from the device's head-phone output to the DMC 1000's AuxiliaryAnalog Audio Inputs.

Auxiliary Analog Audio Inputs

In addition to digital media, the DMC 1000 alsoaccommodates analog source devices, such ascassette decks and turntables, but mainly as arecording source. Connect the device to the rear-panel Auxiliary Inputs.

IMPORTANT NOTE: Do not connect a turntabledirectly to the DMC 1000 unless it includes anonboard phono preamp or is connected to anexternal phono preamp which is then pluggedinto the Auxiliary Inputs. Phono preamps may beavailable from specialty audio shops or electron-ics stores.

The device connected to the Auxiliary Inputs isnot available for source selection in the usualmanner. It is selected as a recording source, asdescribed in the Content Transfer section,although it is possible to monitor the sourcewithout making a recording.

Content Transfer

One of the DMC 1000’s most exciting features isits ability to transfer content from one type ofmedia to another, and to store your library of music on its internal hard-disc drive.

The method for making recordings varies slightly,depending on the source media.

Audio CDs

As soon as an audio CD is loaded, the DMC1000 begins the process of copying it to theMedia Library at high speed. It displays theprogress of the recording as a percentage record-ed.

At the same time, the DMC 1000 automaticallybegins playing the copy of the CD from theMedia Library, if you have programmed the DMC1000’s Setup Menu to do so.

The DMC 1000 uses Gracenote MusicID to iden-tify the CD, tag it with the correct informationand import the album cover art, if available. If theDMC 1000 is not connected to the Internet,Gracenote MusicID will tag the content using theoffline database stored on the DMC 1000’s hard-disc drive; however, it will not display any coverart. For homemade discs, the service will attemptto identify the content based on any tags thatwere created when the disc was recorded.

After the DMC 1000 has finished copying the CDto the Media Library, you may remove the discand store it.

NOTE: The DMC 1000 initially copies the CD to.wav files. If you have adjusted the AudioEncoding Quality setting in the Media LibrarySetup menu to one of the MP3 formats, the DMC1000 will then encode the .wav files as MP3 filesat the specified sampling rate. If you attempt totransfer the CD from the Media Library to amemory card, recordable CD or USB drive beforethe encoding is completed, the files will be trans-ferred as .wav files. Since .wav files are muchlarger than MP3 files, depending on your desti-nation media, you may not have enough space tocomplete the transfer.

Data CDs

Data CDs are discs that contain sound and imagefiles. They are recognized when loaded, but oper-ation is handled differently.

To transfer the CD’s content to the Media Library:

1. Select it as a playback source, and view theaudio files. Still-image files may not be addedto the Media Library.

2. The CD is listed as a single folder, which youmay expand as usual. Select the Add to Libraryoption to import it to the Media Library. Audiofiles are transferred in their original format,e.g., as MP3 files.

Auxiliary Inputs

With the analog audio device connected to theAuxiliary Inputs and the media loaded, eitherpress the Record Button, or press the MenuButton to view the Main Menu. Scroll to theRecord line and press the Enter Button.

Select “Auxiliary” from the dropdown menu asthe recording source. See Figure 23.

Figure 23 – Select a Recording Source

Next, select the Media Library (the only option)as the recording destination. The screen shown inFigure 24 will appear.

Figure 24 – Record From the Auxiliary Inputs

Select the Listen to Aux In option to monitor theanalog device. Begin playing the device, and cueit up to the desired starting point. Example: mostcassette tapes include about five seconds ofblank leader tape, plus additional blank tape atthe beginning. Play until the audio begins so asto minimize the amount of dead air in therecording.


30 OPERATION

Operation

NOTE: The DMC 1000 does not detect the pres-ence or absence of an audio signal at theAuxiliary Inputs.

When you are ready to begin the recording,select the Start Recording option and begin play-back of the analog device. You may experiment by making several recordings and deleting thoseyou don’t want.

While the recording is in progress, a screen simi-lar to the one shown in Figure 25 will appear.

Figure 25 – Recording in Progress

Make a note of the file name automatically gen-erated by the DMC 1000 to easily locate therecording later. The DMC 1000 also displays theelapsed time, and a graphic and numeric displayof the space available on the hard-disc drive.

Select the Pause Recording option to pause therecording without starting a new file whenrecording is resumed. This feature is useful if youwish to record a series of audio tracks as one filewhile skipping breaks in between, such as whenrecording an entire side of a cassette tape intoone file.

Select the Stop Recording option to end record-ing of the file. The screen shown in Figure 26 willappear.

Figure 26 – Recording Complete

Select Done if you are finished, or Record Next torecord another track, which returns to the screenshown in Figure 25, allowing you to cue up thenext track.

To locate the newly recorded tracks, view theMedia Library by Track and by Last Added. Thetrack will be displayed at the top of the list. Youmay also sort the Track view by Name, lookingfor tracks starting with “AUX.” You may wish toview the Tracks by Artist, as all tracks with artist“Unknown” will be listed first, and the record-ings will appear here.

Select the Edit Info option to rename the tracksand add other identifying information. Enter asmuch information as possible about the track toenable Gracenote MusicID to locate any cover artand properly tag the track. This is particularlyuseful when you have recorded commercialalbums from cassette, vinyl or other analogmedia.

Media Library

You may transfer audio content from the MediaLibrary to any of the portable media – memorycards installed in the card slots, a USB deviceconnected to one of the USB Ports, or a record-able CD loaded in the Disc Player.

1. Create a playlist of the desired content. ThePlay Queue may not be used for this purpose.

2. Press the Record Button, or select the Recordcommand from the Main Menu, and select theMedia Library as the source, with the othermedia as the destination.

NOTES: • When a blank recordable CD has been loaded,

you will be presented with the options ofrecording it as an audio disc or as an MP3 disc.Audio discs conform to the “red book” stan-dard and may be played in any standard CDplayer. Many CD players are not capable ofplaying MP3 discs. Check with the manufactur-er of the player for more information.

• Any standard CD-R disc may be used. SpecialMusic/Audio Recordable CDs are not required.

3. The DMC 1000 will display the playlists in theMedia Library. Select one or more playlists for recording.

4. When all selections have been made, selectthe “Record Selected” option to begin thetransfer.

Selections are transferred in the same format inwhich they are stored in the Media Library. Thus,if your CDs are automatically recorded to theMedia Library in the MP3 format, they will betransferred to the portable media as MP3s.Analog audio streams are recorded from theAuxiliary Inputs as lossless WAV files, and aretransferred in that format to the portable media.

NOTE: If recordings made from the AuxiliaryAnalog Audio Inputs were tagged by GracenoteMusicID, the DMC 1000 will generate new filenames in the format of [artist] – [three-digit track number].wav. The tags will be transferred to theportable media with the file. Thus, if you uploadthe file from the media to your PC using softwarethat is capable of recognizing the tags, the trackwill appear with its correct song title and otherinformation.

Solid-State Media

You may transfer content from any of the solid-state media (memory cards or USB device) to theMedia Library in a similar fashion to recordingfrom the Media Library. However, it is not neces-sary to create a playlist, since the data media arealready organized as file folders.

1. Press the Record Button, or select the Recordcommand from the Main Menu, and select thesolid-state media as the source, with theMedia Library (the only option) as the destina-tion.

2. The DMC 1000 will display the folders andfiles stored on the media. Select one or moreitems for recording.

3. When all selections have been made, selectthe “Record Selected” option to begin thetransfer.

NOTE: Content may only be transferred from oneof the solid-state media to the Media Library, notfrom one of the solid-state media to the other. Ifyou wish to transfer content from one type ofmedia to another, first add the content to theMedia Library, and then record it to the othertype of media.


OPERATION 31

ENG

LISH

Operation

Multizone Operation

The DMC 1000 is capable of streaming audio toup to four independent zones simultaneously,allowing users in different areas of the home toenjoy unique programs. The zones may easily belinked or unlinked to each other, to play the sameprogram in more than one zone. Manage thezones by displaying the Main Menu and selectingthe Zones command. The screen shown in Figure27 will appear.

Figure 27 – Zones Menu

Zone 1 is the current zone, as indicated by thecheckmark in the box to its left. Each zone isassigned a different color box, indicating none ofthe zones are linked to other zones.

To rename a zone, highlight the button contain-ing its name and press the Enter Button. Selectone of the default names, such as Den or DiningRoom, or create a new name. The DMC 1000’scharacter-entry dialog box will appear to guideyou. (See Figure 16.)

To link zones together, highlight the line for whatwill be the “master” zone. If other zones are linked to the master zone, con-tent playing in the master zone is streamed toany zones linked to it. Select the Zone Linksoption, and then select one or more of the otherthree zones to link to the master zone.

To unlink zones, highlight the master zone andselect the Zone Links option. Click on a linkedzone to select it for unlinking.

To begin playback in any zone, navigate to itsline, make sure the colored box to the left of thezone name is highlighted and press the EnterButton. A checkmark will appear in the box. Pressthe Menu Button to display the Main Menu, andthe current zone, along with any other zoneslinked to it, will be identified in the upper rightcorner of the video display. Select content for playback in that zone as usual.

When you return to the Zones menu, the coverart for the current selection, or a generic iconwhen no cover art was found, appears to the leftof the line for each active zone.

Interrupt playback to any zone by navigating to itand selecting the Pause Playback option. TheDMC 1000 will remember its location in the cur-rent selection when the Play Button is pressed toresume playback. When the Stop Playback optionis selected, the DMC 1000 will not remember thelocation, and when the Play Button is pressed,playback will start from the beginning of theselection.


32 TROUBLESHOOTING GUIDE

Troubleshooting Guide

TroubleShooting GuideSymptom Possible Cause Solution

Unit does not turn on • No AC power • Check AC power plug and make certain any switchedoutlet is turned on.

• Make sure Master Power Switch on rear panel is turned on to the “1” position.

• If DMC 1000 was in “Full-Off” Power Mode (Power Indicator dim blue), wait for system to reboot.

Disc does not play • Disc loaded improperly • Load disc label-side up; align the disc with the guides and place it in its proper position.

• Incorrect disc type • Check to see that disc is CD, CD-R, CD-RW, VCD, MP3, WMA,JPEG, DVD-R, DVD-RW, DVD+R, DVD+RW (standard conforming), or DVD-Video; other types will not play.

• Invalid Region Code • Use Region 2 or Open Region (0) disc only. • Rating is above parental preset • Enter password to override or change rating settings.

No picture • Intermittent connections • Check all video connections.• Wrong input • Check input selection of TV or receiver. • Progressive Scan output selected • Use Progressive Scan mode only with compatible TV. If needed, press

the Progressive Scan/Interlaced Button L to toggle to the correct mode.

• Video Off feature active • Press Video Off Button Q to reactivate video circuitry (see page 26)• HDMI Output A is connected to a • The HDMI Output A may not be used with video displays that are not

video display that is not HDCP-compliant. HDCP-compliant. Unplug the cable and select another audio and video connection (see pages 13 through 14).

• HDMI communications need to be reset • Turn off all HDMI devices (DMC 1000, receiver, TV). Turn ondevices in this order: TV, then receiver, then DMC 1000.

No sound • Intermittent connections • Check all audio connections.• Incorrect digital audio selection • Check digital audio settings.• DVD disc is in fast or slow mode • There is no audio playback on DVD discs during fast or slow modes.• Surround receiver not compatible • Use analog audio outputs.

with 96kHz PCM audio• Incorrect zone selection • Use the Zones command in the Main Menu to select the

desired zone for playback.• Zone not linked to active zone • Use the Zones command in the Main Menu to link or unlink

zones to each other.• Attempting to use Coaxial or Optical • The HDMI and other digital audio outputs are not available at

Digital Audio Output with HDMI the same time. To use the Coaxial or Optical Digital Audio Outputs,Output active change the HDMI Audio Out setting in the Audio Setup menu to Off.

Picture is distorted or jumps during • MPEG-2 decoding • It is a normal artifact of DVD playback for pictures to jump or show fast forward or reverse play some distortion during rapid play.

• DTS decoding • Due to the format of DTS recordings, fast-play may overshoot or undershoot desired place.

Some remote buttons do not operate • Function not permitted at this time • With most discs, some functions are not permitted at certain during DVD play; prohibited symbol times (e.g., Track Skip) or at all (e.g., direct audio track selection).appears (see below)

The OSD menu is in a foreign language • Incorrect OSD language • Change the display language selection.

The symbol appears • Requested function not available at • Certain functions may be disabled by the DVD itself during this time passages of a disc.

Picture is displayed in the • Incorrect match of aspect ratio settings • Change aspect ratio settings.wrong aspect ratio to disc

Remote control inoperative • Weak batteries • Change both batteries.• Sensor is blocked • Clear path to sensor or use optional outboard remote sensor.

Disc will not copy to VCR • Copy protection • Many DVDs are encoded with copy protection to prevent copying to VCR.

Password not accepted. • Incorrect password being used or • Factory default password “1234” always remains active.password has been forgotten.


TROUBLESHOOTING GUIDE 33

ENG

LISH

Screen saver not activated • Screen saver will not activate when • Clear Setup menus or press Video Off Button to avoid Setup menus are displayed burn-in on plasma and CRT displays.

Cannot program playlist • Current source is other than • Playlists may only be programmed from content stored Media Library in the Media Library. Transfer the other source’s content

to the Media Library, view it from within the Media Library and then create a playlist.

Unable to select desired media • No media is present • Insert the appropriate memory card into one of the cardsource slots, or a USB flash drive into the USB Port

• Wrong type of USB drive was inserted • Only USB flash drives that do not function as stand alone in USB Port MP3 players are compatible

• Media was not inserted correctly • Remove media and carefully insert according to theinstructions on page 7


34 TECHNICAL SPECIFICATIONS

Technical Specifications

Applicable Disc: Disc formats: 5 inch (12 cm) or 3 inch (8 cm) DVD Video, Standard conforming DVD+RW, DVD+R, DVD-R, DVD-RW, VCD, CD, CD-R, MP3, WMA, JPEG or CD-RW discs,Region code: DVD Movie disc with Code 2 or 0 only.DVD-Layers: Single Side/Single Layer, Single Side/Dual Layer, Dual Side/Single Layer, Dual Side/Dual LayerAudio formats: Linear PCM, MPEG, Windows Media® 9, Dolby Digital or DTS Audio discsStill-image format: JPEG

Memory cards Slot 1: Secure Digital (SD), Multimedia Card (MMC) and Memory Stick (compatible with Magic Gate) cards. Other cardtypes may be used with a compatible adapter, but are not guaranteed to be recognized by the DMC 1000 Slot 2: CompactFlash I (CF) cards, or cards using a Compact Flash 1-compatible adapter Card Capacity: Up to 1 GB

USB Port: Up to USB 2.0-compatible solid-state flash drives

Video Signal System: PAL /NTSC

HDMI™ Output: Video: 576p, 720p, 1080i, 1080pHDMI Version 1.1a-compliantHDCP Version 1.1-compliant

Composite Video Output: 1 Vp-p/75 Ohms, sync negative polarity

S Video Output: Y/Luminance: 1 Vp-p/75 Ohms, sync negative polarityC/Chrominance: 0.286 Vp-p

Component Video Output: Y: 1 Vp-p/75 Ohms, sync negative polarity

Cr: 0.7 Vp-p/75 Ohms

Cb: 0.7 Vp-p/75 Ohms

Analog Audio Output: 2 Vrms max

Frequency Response: DVD (Linear PCM): 2Hz - 22kHz (48kHz sampling)2Hz - 44kHz (96kHz sampling)

CD: 2Hz - 20kHz

Signal/Noise Ratio (SNR): 105 dB (A-weighted)

Dynamic Range: DVD: 100dB (18 Bit) / 105dB (20 Bit)CD/DVD: 96dB (16 Bit)

THD/1kHz: DVD/CD: 0.0025 %

Wow & Flutter: Below Measurable Limits

AC Power: 100 - 240 V/50 ~ 60 Hz

Power Consumption: 12 Watts (Standby) /60 Watts (Max)

Dimensions (WxHxD): 440 x 103 x 405 mm

Weight: 8.7 kg

Depth measurement includes knobs and connectors.Height measurement includes feet and chassis.All specifications subject to change without notice.Harman Kardon and Logic 7 are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries.Designed to Entertain and Guide+Play are trademark of Harman International Industries, Incorporated.Manufactured under license from Dolby Laboratories. Dolby, Dolby Digital, ProLogic and the double-D symbol are trademarks of Dolby Laboratories. Blu-ray Disc is a trademark of the Blu-ray Disc Association.HD-DVD is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC). iPod is a trademark of Apple Inc., registered in the U.S. and other countries. Muze is a registered trademark of Muze Inc.xD-Picture Card is a trademark of Olympus Optical Co. Ltd.This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by MacrovisionCorporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing usesonly unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logosand Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.Microsoft, Windows and WMA are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.Kodak is a registered trademark, and Photo CD is a trademark, of Eastman Kodak Company.DivX, DivX Certified, and associated logos are trademarks of DivX Networks, Inc and are used under license.Memory Stick, MagicGate, Memory Stick Duo and SACD are trademarks or registered trademarks of Sony Corporation.CompactFlash is a trademark of the CompactFlash Association.Guide + Play is a trademark of Harman International Industries, Incorporated. The SD logo is a trademark. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rightsowned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home andother limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.


APPENDIX 35

ENG

LISH

Appendix

Appendix – Default settings and worksheets

Table A1 – Media Library Setup Menu

Setting Default Your Settings

Auto Disc Insert Preferences Play & Record

Audio Encoding Quality MP3 192kbps (Medium)

Table A2 – DVD Player Setup Menu


Preferred Subtitle Language Off

Preferred Audio Language English

Parental Control Level Off

Video Presentation Mode Original

Dynamic Range Compression Off

DVD Bass Management Off

Table A3 – Audio Setup Menu


Speaker Setup Front L & R: Large Front L & R: Surround L & R: Large Surround L & R: Center: Large Center: Subwoofer: Yes Subwoofer:

Digital Audio Out Format Compressed

HDMI Audio Out Auto

Table A4 – Video Setup Menu


Video Output Depends on physical connections.

Output Resolution Depends on physical connections:Analog (composite or S-video): 480iAnalog (component): 480pHDMI: Auto

Table A5 – General Setup MenuNOTE: These settings are not adjusted in normal use.

Setting Purpose Your Settings

Software Update If a system software upgrade Not used.becomes available in the future,download it to a CD and follow the instructions here.

Date & Time Set system date and time after a reset. Adjusted only after a reset.

System Information Displays software version and Not used.hard-disc drive usage.


36 APPENDIX

Table A6 – Advanced Setup Menu

Setting Purpose Your Settings

Backup Backs up hard-disc drive as a After your custom installer transfers your precaution. music collection to the Media Library, he

or she should back it up as a precaution.

Restore In case the hard-disc drive is replaced, Keep your backup of the Media Library restores the Media Library from updated.the last version that was backed up.

Reset Factory Defaults System reset. Use only as a last resort. Requires reconfiguring all system settings. The Media Library’s contents are not affected.

Network Displays network identification Ethernet: parameters. IP Address:Subnet Mask:Gateway Address: DNS 1:DNS 2:Proxy Address:Proxy Port Number:

Language Selected Sets system display language. Default is English.

Format USB Reformats a USB device, Exercise extreme caution before usingerasing all content. this command.

Table A7 – Power Modes

Power Indicator Functionality Front-Panel Remote Control Remote Control Mode Power Control Power On Power Off

Full-Off Mode Dim blue System powered down System boots and goes System boots and goes No actionto Full-Power Mode to Full-Power Mode

Sleep Mode Amber Standby; unit is ready Full-Power Mode Full-Power Mode No actionfor quick turn-on

Server Mode Amber Remote-zone and Full-Power Mode Full-Power Mode Sleep Modenetwork control available; on-screen menus off

Full-Power Bright blue Operates normally Single press › No action Single press ›Server Mode Server ModePress and hold › Press and hold › Full-Off Mode Full-Off Mode

Appendix


EULA 37

ENG

LISH

1. Grant of License. Subject to the restrictions definedin this Agreement, You are permitted to use theSoftware solely as a part of and in connection withyour use of the Product for personal entertainmentand enjoyment purposes.

2. License Restrictions. You will not, or assist or directany third person to: (i) extract, separate, remove orotherwise copy the Software; (ii) disassemble,decompile, reverse engineer or otherwise convertany part of the Software to source code or ahuman-perceivable form; (iii) adapt, modify or cre-ate a derivative work of the Software; (iv) distrib-ute, encumber, lease, rent, sell, transmit, transfer, orotherwise dispose of the Software, in whole or inpart, except You may transfer the Software uponand as an intact part of a permanent and permissi-ble transfer of the Product; or (v) use the Softwarewith any other product or for any other purpose.

3. Ownership of Software. The Software consists ofHarman’s proprietary software and softwareobtained from third-party licensors. You acknowl-edge that the Software is the sole property ofHarman and its licensors. Harman and its licensorsretain all rights, title and interest in and to theSoftware, including any and all modifications,updates, derivative works and all associated intel-lectual property rights therein. Except as expresslygranted to You under the terms of this Agreement,Harman does not grant You any right, title or inter-est in or to the Software. You will not delete,remove or otherwise alter any copyright, trade-mark, confidentiality or other proprietary noticeappearing in the Software. You will not take anyaction to jeopardize, limit or interfere in any man-ner with Harman’s or its licensors’ ownership of theSoftware. Harman reserves the sole and exclusiveright at its discretion to assert claims against thirdparties for infringement or misappropriation of itsintellectual property rights in the Software.

4. Termination. This Agreement is effective until termi-nated by Harman. Your rights to use the Productand Software will automatically terminate, with orwithout notice, upon any violation or breach of thisAgreement by You, in which case you will immedi-ately stop all use of the Product and Software..

5. SEPARATE LIMITED WARRANTY. HARMAN OFFERS ALIMITED WARRANTY TO YOU FOR YOUR USE OFTHE PRODUCT AS DEFINED BY THE HARMAN LIM-ITED WARRANTY INCLUDED WITH THE PRODUCT(“LIMITED WARRANTY”). THIS AGREEMENT DOESNOT CONTAIN OR CONSTITUTE A NEW OR SEPA-RATE WARRANTY REGARDING THE PRODUCT OR

SOFTWARE AND DOES NOT MODIFY OR EXTENDTHE LIMITED WARRANTY. THIS AGREEMENT DOESNOT: (I) PROVIDE YOU ANY ADDITIONAL REME-DIES; OR (II) CONSTITUTE A MODIFICATION OREXTENSION OF THE REMEDIES AVAILABLE TO YOUAS SET FORTH IN THE LIMITED WARRANTY.

6. DISCLAIMER OF WARRANTIES. TO THE MAXIMUMEXTENT PERMITTED BY APPLICABLE LAW, HAR-MAN PROVIDES THE SOFTWARE “AS IS” ANDWITHOUT WARRANTY. HARMAN DISCLAIMS ALLCOMMON LAW AND STATUTORY WARRANTIES ASTO THE CONDITION, QUALITY, FITNESS, MAINTE-NANCE AND USE OF THE SOFTWARE, INCLUDINGAND WITHOUT LIMITATION, THE WARRANTIES OFMERCHANTABILITY, FITNESS FOR ANY PARTICU-LAR PURPOSE OR NON-INFRINGEMENT OF THIRDPARTY INTELLECTUAL PROPERTY RIGHTS. NO HAR-MAN DEALER, AGENT OR EMPLOYEE IS AUTHOR-IZED TO CREATE, MODIFY, EXTEND OR OTHERWISEMAKE ANY WARRANTY ON BEHALF OF HARMAN.

7. LIMITATION OF LIABILITY. TO THE MAXIMUMEXTENT PERMITTED BY APPLICABLE LAW, IN NOEVENT WILL HARMAN, INCLUDING ITS PARENTCOMPANY, AFFILIATES, EQUITY HOLDERS, DIREC-TORS, OFFICERS, EMPLOYEES AND AGENTS, OR ITSSUPPLIERS BE LIABLE TO YOU OR ANY THIRD-PARTY FOR ANY INCIDENTAL, INDIRECT, SPECIAL,REMOTE, EXEMPLARY, PUNITIVE OR CONSEQUEN-TIAL DAMAGES, INCLUDING AND WITHOUT LIMI-TATION, COSTS OF PROCUREMENT OF SUBSTI-TUTE OR REPLACEMENT PRODUCTS, LOSS OFINFORMATION, DATA OR CONTENT, LOSS OF REV-ENUE OR PROFITS OR ATTORNEY’S FEES, ARISINGFROM OR CAUSED BY, DIRECTLY OR INDIRECTLY,THE SALE OR USE OF OR INABILITY TO USE THESOFTWARE OR PRODUCT, REGARDLESS OF THEFORM OF ACTION, WHETHER IN CONTRACT, TORT,STRICT LIABILITY OR OTHERWISE AT LAW OR INEQUITY, EVEN IF HARMAN HAS BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES. THIS LIMITA-TION SHALL BE EFFECTIVE EVEN IF ANY REMEDYIN THIS AGREEMENT OR OTHERWISE PROVIDED BYHARMAN FAILS OF ITS ESSENTIAL PURPOSE. TOTHE EXTENT PERMITTED BY APPLICABLE LAW, INNO EVENT WILL HARMAN’S TOTAL AND AGGRE-GATE LIABILITY FOR ANY AND ALL CLAIMS UNDERTHIS AGREEMENT OR ARISING FROM THE SOFT-WARE, REGARDLESS OF THE FORM OF ACTION,WHETHER IN CONTRACT, TORT, STRICT LIABILITYOR OTHERWISE, AT LAW OR IN EQUITY, EXCEEDTHE PURCHASE PRICE OF THE PRODUCT.

8. Irreparable Harm. You agree that Your breach orthreatened breach of any provision of thisAgreement will cause irreparable harm to Harmanfor which a remedy at law would be inadequate.Harman is entitled to seek all available remedies atlaw and in equity, including injunctive relief, toenforce any provision of this Agreement and torestrain You from adapting, disclosing, distributing,modifying, publishing, transferring, using or other-wise disposing of the Software, in whole or in part,directly or indirectly, in breach of this Agreement.

9. U.S. Government Restricted Rights. Use, duplicationand disclosure by the U.S. Government is subject torestrictions set forth in this Agreement.

10. Export Restrictions. You will obey the laws and reg-ulations of the United States governing exports andre-exports of the Product and/or Software.

11. Governing Law. This Agreement shall be governedby and construed in accordance with the substan-tive laws of the state of New York, excluding allapplicable laws pertaining to conflicts of law andthe United Nations Convention on Contracts for theInternational Sale of Goods.

12. Limitation of Transfer. The Software and this licenseto use the Software is transferable, provided that:(i) all Software updates are included in the transfer;(ii) You do not retain a copy of the Software; (iii) You transfer theSoftware upon and as an intact part of a perma-nent and permissible transfer of the Product; and(iv) the transferee agrees to be bound by the termsand conditions of this Agreement in connectionwith the use of the Product. The terms and condi-tions of this Agreement will bind and inure to thebenefit of such permitted transferees.

13. Survival. Sections 3, 4, 6, 7, 11 and 13 will survivethe termination and expiration of this Agreement.

14. Entire Agreement. This Agreement is the completeand final agreement between You and Harman withrespect to the subject matter of this Agreement. Tothe extent that any terms of any Harman policies orprograms for support services conflict with theterms of this Agreement, the terms of thisAgreement shall control.

15. Severability. If any court or other tribunal of compe-tent jurisdiction finds or holds any provision of this Agreement to be void, invalid, ille-gal or otherwise unenforceable the remaining pro-visions of this Agreement will remain in full forceand effect.

Eula

END-USER LICENSE AGREEMENT (EULA)

IMPORTANT. READ CAREFULLY. THIS END-USER LICENSE AGREEMENT (“AGREEMENT”) DEFINES THE LEGALAGREEMENT BETWEEN YOU (INDIVIDUAL OR ENTITY) AND HARMAN CONSUMER GROUP, INC. (“HARMAN”). YOU ARE PERMITTED TO USE THE DMC1000 (“PRODUCT”) AND THE SOFTWARE CONTAINED AND EMBEDDED IN THE PRODUCT (“SOFTWARE”) ONLY IF YOU ACCEPT ALL OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT. BY USING THE PRODUCT AND SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE TERMSAND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO BE BOUND, YOU MUST STOP USING THEPRODUCT AND SOFTWARE. YOU AND HARMAN AGREE AS FOLLOWS:


38 EULA

16. Copyright Notices, Attributions and Licenses. Someof Harman’s licensors require the reproduction ofcertain copyright notices and authorship attributionin Harman’s documentation. Such notices, attribu-tions and licenses are as follows:

LAME-3.93.1. © 2002 Steve [email protected] The Software contained inthe Product uses the LAME software. LAME islicensed to Harman and You under the GNU LesserGeneral Public License – Version 2.1, see below forlicense terms. Harman does not modify the LAMEsoftware. For more information visithttp://www.mp3dev.org.

Libtar-1.2.11. © 1998-2003 University of IllinoisBoard of Trustees, © 1998-2003 Mark D. Rothall.All rights reserved. http://www.feep.net/libtar.Redistribution and use in source and binary forms,with or without modification, are permitted provid-ed that the following conditions are met: (1)Redistributions of source code must retain theabove copyright notice, this list of conditions andthe following disclaimer; (2) Redistributions in bina-ry form must reproduce the above copyright notice,this list of conditions and the following disclaimerin the documentation and/or other materials pro-vided with the distribution; and (3) Neither thename of the <ORGANIZATION> nor the names ofits contributors may be used to endorse or promoteproducts derived from this software without specificprior written permission. THIS SOFTWARE IS PRO-VIDED BY THE COPYRIGHT HOLDERS AND CON-TRIBUTORS "AS IS" AND ANY EXPRESS ORIMPLIED WARRANTIES, INCLUDING, BUT NOT LIM-ITED TO, THE IMPLIED WARRANTIES OF MER-CHANTABILITY AND FITNESS FOR A PARTICULARPURPOSE ARE DISCLAIMED. IN NO EVENT SHALLTHE COPYRIGHT OWNER OR CONTRIBUTORS BELIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAM-AGES (INCLUDING, BUT NOT LIMITED TO, PRO-CUREMENT OF SUBSTITUTE GOODS OR SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESSINTERRUPTION) HOWEVER CAUSED AND ON ANYTHEORY OF LIABILITY, WHETHER IN CONTRACT,STRICT LIABILITY, OR TORT (INCLUDING NEGLI-GENCE OR OTHERWISE) ARISING IN ANY WAY OUTOF THE USE OF THIS SOFTWARE, EVEN IF ADVISEDOF THE POSSIBILITY OF SUCH DAMAGE.

Libxm-2.6.19. © 1998-2003 Daniel Veillard. Formore information visit http://xmlsoft.org/.Permission is hereby granted, free of charge, to anyperson obtaining a copy of this software and asso-ciated documentation files (the “Software”), todeal in the Software without restriction, includingwithout limitation the rights to use, copy, modify,merge, publish, distribute, sublicense, and/or sellcopies of the Software, and to permit persons towhom the Software is furnished to do so, subject tothe following conditions: The above copyrightnotice and this permission notice shall be includedin all copies or substantial portions of the Software.THE SOFTWARE IS PROVIDED “AS IS,” WITHOUTWARRANTY OF ANY KIND, EXPRESS OR IMPLIED,INCLUDING BUT NOT LIMITED TO THE WAR-

RANTIES OF MERCHANTABILITY, FITNESS FOR APARTICULAR PURPOSE AND NONINFRINGEMENT.IN NO EVENT SHALL THE AUTHORS OR COPY-RIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAM-AGES OR OTHER LIABILITY, WHETHER IN ANACTION OF CONTRACT, TORT OR OTHERWISE,ARISING FROM, OUT OF OR IN CONNECTIONWITH THE SOFTWARE OR THE USE OR OTHERDEALINGS IN THE SOFTWARE.

Gracenote EULA

Gracenote and Muze® Terms of Use

This device contains software from Gracenote, Inc.of 2000 Powell St. Emeryville, California 94608(“Gracenote”) and may include portions of contentbelonging to or licensed from Muze Inc. of 304Hudson Street, New York, New York 10013(“Muze”).

The software from Gracenote (the “GracenoteSoftware”) enables this device to do disc and musicfile identification and obtain music-related informa-tion, including name, artist, track, and title informa-tion (“Gracenote Data”) from online servers(“Gracenote Servers”), and to perform other func-tions. You may use Gracenote Data only by meansof the intended End User functions of this device.

You agree that you will use the content from Muze(“Muze Content”), Gracenote Data, the GracenoteSoftware, and Gracenote Servers for your own per-sonal, non-commercial use only. You agree not toassign, copy, transfer or transmit the Muze Content,Gracenote Software or any Gracenote Data (exceptin a Tag associated with a music file) to any thirdparty. YOU AGREE NOT TO USE OR EXPLOIT MUZECONTENT, GRACENOTE DATA, THE GRACENOTESOFTWARE, OR GRACENOTE SERVERS, EXCEPT ASEXPRESSLY PERMITTED HEREIN.

You agree that your non-exclusive licenses to usethe Muze Content, Gracenote Data, the GracenoteSoftware, and Gracenote Servers will terminate ifyou violate these restrictions. If your licenses termi-nate, you agree to cease any and all use of theMuze Content, Gracenote Data, the GracenoteSoftware, and Gracenote Servers. Gracenote andMuze, respectively, reserve all rights in GracenoteData, the Gracenote Software, and the GracenoteServers and Muze Content, including all ownershiprights. Under no circumstances will eitherGracenote or Muze become liable for any paymentto you for any information that you provide, includ-ing any copyrighted material or music file informa-tion. You agree that Gracenote and/or Muze mayenforce its respective rights, collectively or sepa-rately, under this agreement against you, directly ineach company's own name.

Gracenote uses a unique identifier to track queriesfor statistical purposes. The purpose of a randomlyassigned numeric identifier is to allow Gracenote tocount queries without knowing anything aboutwho you are. For more information, see the webpage at www.gracenote.com for the GracenotePrivacy Policy.

THE GRACENOTE SOFTWARE, EACH ITEM OF GRA-CENOTE DATA AND THE MUZE CONTENT ARELICENSED TO YOU “AS IS.” NEITHER GRACENOTENOR MUZE MAKES ANY REPRESENTATIONS ORWARRANTIES, EXPRESS OR IMPLIED, REGARDINGTHE ACCURACY OF ANY GRACENOTE DATA FROMTHE GRACENOTE SERVERS OR MUZE CONTENT.GRACENOTE AND MUZE COLLECTIVELY AND SEPA-RATELY RESERVE THE RIGHT TO DELETE DATAAND/OR CONTENT FROM THE COMPANIES’RESPECTIVE SERVERS OR, IN THE CASE OF GRA-CENOTE, CHANGE DATA CATEGORIES FOR ANYCAUSE THAT GRACENOTE DEEMS SUFFICIENT. NOWARRANTY IS MADE THAT EITHER MUZE CON-TENT OR THE GRACENOTE SOFTWARE OR GRA-CENOTE SERVERS ARE ERROR-FREE OR THAT THEFUNCTIONING OF THE GRACENOTE SOFTWARE ORGRACENOTE SERVERS WILL BE UNINTERRUPTED.GRACENOTE IS NOT OBLIGATED TO PROVIDE YOUWITH ANY ENHANCED OR ADDITIONAL DATATYPES THAT GRACENOTE MAY CHOOSE TO PRO-VIDE IN THE FUTURE AND IS FREE TO DISCONTIN-UE ITS ONLINE SERVICES AT ANY TIME. GRA-CENOTE AND MUZE DISCLAIM ALL WARRANTIESEXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMIT-ED TO, IMPLIED WARRANTIES OF MERCHANTABILI-TY, FITNESS FOR A PARTICULAR PURPOSE, TITLE,AND NON-INFRINGEMENT. NEITHER GRACENOTENOR MUZE WARRANTS THE RESULTS THAT WILLBE OBTAINED BY YOUR USE OF THE GRACENOTESOFTWARE OR ANY GRACENOTE SERVER. IN NOCASE WILL GRACENOTE OR MUZE BE LIABLE FORANY CONSEQUENTIAL OR INCIDENTAL DAMAGESOR FOR ANY LOST PROFITS OR LOST REVENUESFOR ANY REASON WHATSOEVER. © Gracenote2006

17. Open Source. Certain libraries are licensed to Youunder the terms of the GNU Lesser General PublicLicense, Version 2.1 (“GNU LGPL”). Harman is notallowed to sub-license the GNU LGPL libraries toYou as You are deemed to have Your own directlicense from the original licensee. Harman does notmodify these libraries in any way. Harman herebyoffers to You, upon Your request and for the actualcosts of materials and shipping, all source code andobject code files for all GNU LGPL libraries con-tained in the Software.

18. GNU Lesser General Public License, Version 2.1,February 1999

Preamble: The licenses for most software aredesigned to take away your freedom to share andchange it. By contrast, the GNU General PublicLicenses are intended to guarantee your freedom toshare and change free software – to make sure thesoftware is free for all its users. This license, theLesser General Public License, applies to some spe-cially designated software packages – typicallylibraries – of the Free Software Foundation andother authors who decide to use it. You can use ittoo, but we suggest you first think carefully aboutwhether this license or the ordinary General PublicLicense is the better strategy to use in any particular case, based on the explanationsbelow.

Eula


EULA 39

ENG

LISHWhen we speak of free software, we are referring

to freedom of use, not price. Our General PublicLicenses are designed to make sure that you havethe freedom to distribute copies of free software(and charge for this service if you wish); that youreceive source code or can get it if you want it; thatyou can change the software and use pieces of it innew free programs; and that you are informed thatyou can do these things.

To protect your rights, we need to make restrictionsthat forbid distributors to deny you these rights orto ask you to surrender these rights. These restric-tions translate to certain responsibilities for you ifyou distribute copies of the library or if you modifyit. For example, if you distribute copies of thelibrary, whether gratis or for a fee, you must givethe recipients all the rights that we gave you. Youmust make sure that they, too, receive or can getthe source code. If you link other code with thelibrary, you must provide complete object files tothe recipients, so that they can relink them with thelibrary after making changes to the library andrecompiling it. And you must show them theseterms so they know their rights. We protect yourrights with a two-step method: (1) we copyright thelibrary, and (2) we offer you this license, whichgives you legal permission to copy, distributeand/or modify the library. To protect each distribu-tor, we want to make it very clear that there is nowarranty for the free library. Also, if the library ismodified by someone else and passed on, therecipients should know that what they have is notthe original version, so that the original author’sreputation will not be affected by problems thatmight be introduced by others. Finally, softwarepatents pose a constant threat to the existence ofany free program. We wish to make sure that acompany cannot effectively restrict the users of afree program by obtaining a restrictive license froma patent holder. Therefore, we insist that any patentlicense obtained for a version of the library must beconsistent with the full freedom of use specified inthis license. Most GNU software, including somelibraries, is covered by the ordinary GNU GeneralPublic License. This license, the GNU Lesser GeneralPublic License, applies to certain designatedlibraries, and is quite different from the ordinaryGeneral Public License. We use this license for cer-tain libraries in order to permit linking thoselibraries into non-free programs. When a program islinked with a library, whether statically or using ashared library, the combination of the two is legallyspeaking a combined work, a derivative of the original library. The ordinaryGeneral Public License therefore permits such link-ing only if the entire combination fits its criteria offreedom. The Lesser General Public License permitsmore lax criteria for linking other code with thelibrary. We call this license the “Lesser” GeneralPublic License because it does Less to protect theuser’s freedom than the ordinary General PublicLicense. It also provides other free software devel-opers Less of an advantage over competing non-free programs. These disadvantages are the reasonwe use the ordinary General Public License for

many libraries. However, the Lesser license providesadvantages in certain special circumstances. Forexample, on rare occasions, there may be a specialneed to encourage the widest possible use of a cer-tain library, so that it becomes a de-facto standard.To achieve this, non-free programs must be allowedto use the library. A more frequent case is that afree library does the same job as widely used non-free libraries. In this case, there is little to gain bylimiting the free library to free software only, so weuse the Lesser General Public License. In othercases, permission to use a particular library in non-free programs enables a greater number of peopleto use a large body of free software. For example,permission to use the GNU C Library in non-freeprograms enables many more people to use thewhole GNU operating system, as well as its variant,the GNU/Linux operating system. Although theLesser General Public License is Less protective ofthe users’ freedom, it does ensure that the user ofa program that is linked with the Library has thefreedom and the wherewithal to run that programusing a modified version of the Library. The preciseterms and conditions for copying, distribution andmodification follow. Pay close attention to the dif-ference between a “work based on the library” anda “work that uses the library.” The former containscode derived from the library, whereas the lattermust be combined with the library in order to run.

Terms and Conditions for Copying, Distribution andmodification

0. This License Agreement applies to any softwarelibrary or other program which contains a noticeplaced by the copyright holder or other authorizedparty saying it may be distributed under the terms of this Lesser GeneralPublic License (also called “this License”). Eachlicensee is addressed as “You.”

A “library” means a collection of software functionsand/or data prepared so as to be convenientlylinked with application programs (which use someof those functions and data) to form executables.

The “Library,” below, refers to any such softwarelibrary or work which has been distributed underthese terms. A “work based on the Library” meanseither the Library or any derivative work undercopyright law: that is to say, a work containing theLibrary or a portion of it, either verbatim or withmodifications and/or translated straightforwardlyinto another language. (Hereinafter, translation isincluded without limitation in the term “modifica-tion.”)

“Source code” for a work means the preferred formof the work for making modifications to it. For alibrary, complete source code means all the sourcecode for all modules it contains, plus any associat-ed interface definition files, plus the scripts used tocontrol compilation and installation of the library.

Activities other than copying, distribution and mod-ification are not covered by this License; they areoutside its scope. The act of running a programusing the Library is not restricted, and output fromsuch a program is covered only if its contents con-

stitute a work based on the Library (independent ofthe use of the Library in a tool for writing it).Whether that is true depends on what the Librarydoes and what the program that uses the Librarydoes.

1. You may copy and distribute verbatim copies of theLibrary’s complete source code as you receive it, inany medium, provided that you conspicuously andappropriately publish on each copy an appropriatecopyright notice and disclaimer of warranty; keepintact all the notices that refer to this License andto the absence of any warranty; and distribute acopy of this License along with the Library.

You may charge a fee for the physical act of trans-ferring a copy, and you may at your option offerwarranty protection in exchange for a fee.

2. You may modify your copy or copies of the Library orany portion of it, thus forming a work based on theLibrary, and copy and distribute such modificationsor work under the terms of Section 1 above, provid-ed that you also meet all of these conditions: a) The modified work must itself be a softwarelibrary; b) You must cause the files modified to carryprominent notices stating that you changed thefiles and the date of any change; and c) You mustcause the whole of the work to be licensed at nocharge to all third parties under the terms of thisLicense; and d) If a facility in the modified Libraryrefers to a function or a table of data to be sup-plied by an application program that uses the facili-ty, other than as an argument passed when thefacility is invoked, then you must make a good faitheffort to ensure that, in the event an applicationdoes not supply such function or table, the facilitystill operates, and performs whatever part of itspurpose remains meaningful. (For example, a func-tion in a library to compute square roots has a pur-pose that is entirely well-defined independent ofthe application. Therefore, Subsection 2d requiresthat any application-supplied function or table usedby this function must be optional: if the applicationdoes not supply it, the square root function muststill compute square roots.)

These requirements apply to the modified work as awhole. If identifiable sections of that work are notderived from the Library, and can be reasonablyconsidered independent and separate works inthemselves, then this License, and its terms, do notapply to those sections when you distribute themas separate works. But when you distribute the same sections as part of a wholewhich is a work based on the Library, the distribu-tion of the whole must be on the terms of thisLicense, whose permissions for other licenseesextend to the entire whole, and thus to each andevery part regardless of who wrote it.

Thus, it is not the intent of this section to claimrights or contest your rights to work written entirelyby you; rather, the intent is to exercise the right tocontrol the distribution of derivative or collectiveworks based on the Library.

Eula


40 EULA

In addition, mere aggregation of another work notbased on the Library with the Library (or with awork based on the Library) on a volume of a stor-age or distribution medium does not bring theother work under the scope of this License.

3. You may opt to apply the terms of the ordinaryGNU General Public License instead of this Licenseto a given copy of the Library. To do this, you mustalter all the notices that refer to this License, sothat they refer to the ordinary GNU General PublicLicense, version 2, instead of to this License. (If anewer version than version 2 of the ordinary GNUGeneral Public License has appeared, then you canspecify that version instead if you wish.) Do notmake any other change in these notices.

Once this change is made in a given copy, it is irre-versible for that copy, so the ordinary GNU GeneralPublic License applies to all subsequent copies andderivative works made from that copy.

This option is useful when you wish to copy part ofthe code of the Library into a program that is not alibrary.

4. You may copy and distribute the Library (or a por-tion or derivative of it, under Section 2) in objectcode or executable form under the terms ofSections 1 and 2 above provided that you accom-pany it with the complete corresponding machine-readable source code, which must be distributedunder the terms of Sections 1 and 2 above on amedium customarily used for software interchange.

If distribution of object code is made by offeringaccess to copy from a designated place, then offer-ing equivalent access to copy the source code fromthe same place satisfies the requirement to distrib-ute the source code, even though third parties are not compelled to copy the source along with theobject code.

5. A program that contains no derivative of any por-tion of the Library, but is designed to work with theLibrary by being compiled or linked with it, is calleda “work that uses the Library.” Such a work, in iso-lation, is not a derivative work of the Library, andtherefore falls outside the scope of this License.

However, linking a “work that uses the Library”with the Library creates an executable that is aderivative of the Library (because it contains por-tions of the Library), rather than a “work that usesthe library.” The executable is therefore covered bythis License. Section 6 states terms for distributionof such executables.

When a “work that uses the Library” uses materialfrom a header file that is part of the Library, theobject code for the work may be a derivative workof the Library even though the source code is not.Whether this is true is especially significant if thework can be linked without the Library, or if thework is itself a library. The threshold for this to betrue is not precisely defined by law.

If such an object file uses only numerical parame-ters, data structure layouts and accessors, andsmall macros and small inline functions (ten lines or

less in length), then the use of the object file isunrestricted, regardless of whether it is legally aderivative work. (Executables containing this objectcode plus portions of the Library will still fall underSection 6.)

Otherwise, if the work is a derivative of the Library,you may distribute the object code for the workunder the terms of Section 6. Any executables con-taining that work also fall under Section 6, whetheror not they are linked directly with the Library itself.

6. As an exception to the Sections above, you mayalso combine or link a “work that uses the Library”with the Library to produce a work containing por-tions of the Library, and distribute that work underterms of your choice, provided that the terms per-mit modification of the work for the customer'sown use and reverse engineering for debuggingsuch modifications.

You must give prominent notice with each copy ofthe work that the Library is used in it and that theLibrary and its use are covered by this License. Youmust supply a copy of this License. If the work dur-ing execution displays copyright notices, you mustinclude the copyright notice for the Library amongthem, as well as a reference directing the user tothe copy of this License. Also, you must do one ofthese things: a) Accompany the work with the com-plete corresponding machine-readable source codefor the Library including whatever changes wereused in the work (which must be distributed underSections 1 and 2 above); and, if the work is an exe-cutable linked with the Library, with the completemachine-readable “work that uses the Library,” asobject code and/or source code, so that the usercan modify the Library and then relink to produce amodified executable containing the modifiedLibrary. (It is understood that the user who changesthe contents of definitions files in the Library willnot necessarily be able to recompile the applicationto use the modified definitions.); b) Use a suitableshared library mechanism for linking with theLibrary. A suitable mechanism is one that (1) usesat run time a copy of the library already present onthe user's computer system, rather than copyinglibrary functions into the executable, and (2) willoperate properly with a modified version of thelibrary, if the user installs one, as long as the modi-fied version is interface-compatible with the versionthat the work was made with; c) Accompany thework with a written offer, valid for at least threeyears, to give the same user the materials specifiedin Subsection 6a, above, for a charge no more thanthe cost of performing this distribution; d) If distribution of thework is made by offering access to copy from adesignated place, offer equivalent access to copythe above specified materials from the same place;and e) Verify that the user has already received acopy of these materials or that you have alreadysent this user a copy.

For an executable, the required form of the “workthat uses the Library” must include any data andutility programs needed for reproducing the exe-

cutable from it. However, as a special exception,the materials to be distributed need not includeanything that is normally distributed (in eithersource or binary form) with the major components(compiler, kernel, and so on) of the operating sys-tem on which the executable runs, unless that com-ponent itself accompanies the executable.

It may happen that this requirement contradicts thelicense restrictions of other proprietary libraries thatdo not normally accompany the operating system.Such a contradiction means you cannot use boththem and the Library together in an executable thatyou distribute.

7. You may place library facilities that are a workbased on the Library side-by-side in a single librarytogether with other library facilities not covered bythis License, and distribute such a combined library, provided thatthe separate distribution of the work based on theLibrary and of the other library facilities is otherwisepermitted, and provided that you do these two things: a)Accompany the combined library with a copy of thesame work based on the Library, uncombined withany other library facilities. This must be distributed under the terms of theSections above; and b) Give prominent notice withthe combined library of the fact that part of it is awork based on the Library, and explaining where tofind the accompanying uncombined form of thesame work.

8. You may not copy, modify, sublicense, link with, ordistribute the Library except as expressly providedunder this License. Any attempt otherwise to copy,modify, sublicense, link with, or distribute theLibrary is void, and will automatically terminateyour rights under this License. However, partieswho have received copies, or rights, from you underthis License will not have their licenses terminatedso long as such parties remain in full compliance.

9. You are not required to accept this License, sinceyou have not signed it. However, nothing elsegrants you permission to modify or distribute theLibrary or its derivative works. These actions areprohibited by law if you do not accept this License.Therefore, by modifying or distributing the Library(or any work based on the Library), you indicateyour acceptance of this License to do so, and all itsterms and conditions for copying, distributing ormodifying the Library or works based on it.

10. Each time you redistribute the Library (or any workbased on the Library), the recipient automaticallyreceives a license from the original licensor to copy,distribute, link with or modify the Library subject to these terms andconditions. You may not impose any further restrictions on the recipients’ exercise of therights granted herein. You are not responsible forenforcing compliance by third parties with thisLicense.

Eula


EULA 41

ENG

LISH11. If, as a consequence of a court judgment or allega-

tion of patent infringement or for any other reason(not limited to patent issues), conditions areimposed on you (whether by court order, agree-ment or otherwise) that contradict the conditions ofthis License, they do not excuse you from the condi-tions of this License. If you cannot distribute so asto satisfy simultaneously your obligations under thisLicense and any other pertinent obligations, then asa consequence you may not distribute the Library atall. For example, if a patent license would not per-mit royalty-free redistribution of the Library by allthose who receive copies directly or indirectlythrough you, then the only way you could satisfyboth it and this License would be to refrain entirelyfrom distribution of the Library.

If any portion of this section is held invalid or unen-forceable under any particular circumstance, the balance of the section is intendedto apply, and the section as a whole is intended toapply in other circumstances.

It is not the purpose of this section to induce you toinfringe any patents or other property right claimsor to contest validity of any such claims; this sectionhas the sole purpose of protecting the integrity ofthe free software distribution system which isimplemented by public license practices. Many peo-ple have made generous contributions to the widerange of software distributed through that systemin reliance on consistent application of that system;it is up to the author/donor to decide if he or she iswilling to distribute software through any other sys-tem and a licensee cannot impose that choice.

This section is intended to make thoroughly clearwhat is believed to be a consequence of the rest ofthis License.

12. If the distribution and/or use of the Library isrestricted in certain countries either by patents orby copyrighted interfaces, the original copyrightholder who places the Library under this Licensemay add an explicit geographical distribution limi-tation excluding those countries, so that distribu-tion is permitted only in or among countries notthus excluded. In such case, this License incorpo-rates the limitation as if written in the body of this License.

13. The Free Software Foundation may publish revisedand/or new versions of the Lesser General PublicLicense from time to time. Such new versions willbe similar in spirit to the present version, but maydiffer in detail to address new problems or con-cerns.

Each version is given a distinguishing version num-ber. If the Library specifies a version number of thisLicense which applies to it and “any later version,”you have the option of following the terms andconditions either of that version or of any later ver-sion published by the Free Software Foundation. Ifthe Library does not specify a license version num-ber, you may choose any version ever published bythe Free Software Foundation.

14. If you wish to incorporate parts of the Library intoother free programs whose distribution conditionsare incompatible with these, write to the author toask for permission. For software which is copyright-ed by the Free Software Foundation, write to theFree Software Foundation; we sometimes makeexceptions for this. Our decision will be guided bythe two goals of preserving the free status of allderivatives of our free software and of promotingthe sharing and reuse of software generally.

NO WARRANTY

15. BECAUSE THE LIBRARY IS LICENSED FREE OFCHARGE, THERE IS NO WARRANTY FOR THELIBRARY, TO THE EXTENT PERMITTED BY APPLICA-BLE LAW. EXCEPT WHEN OTHERWISE STATED INWRITING THE COPYRIGHT HOLDERS AND/OROTHER PARTIES PROVIDE THE LIBRARY “AS IS”WITHOUT WARRANTY OF ANY KIND, EITHEREXPRESSED OR IMPLIED, INCLUDING, BUT NOTLIMITED TO, THE IMPLIED WARRANTIES OF MER-CHANTABILITY AND FITNESS FOR A PARTICULARPURPOSE. THE ENTIRE RISK AS TO THE QUALITYAND PERFORMANCE OF THE LIBRARY IS WITHYOU. SHOULD THE LIBRARY PROVE DEFECTIVE,YOU ASSUME THE COST OF ALL NECESSARY SERV-ICING, REPAIR OR CORRECTION.

16. IN NO EVENT UNLESS REQUIRED BY APPLICABLELAW OR AGREED TO IN WRITING WILL ANY COPY-RIGHT HOLDER, OR ANY OTHER PARTY WHO MAYMODIFY AND/OR REDISTRIBUTE THE LIBRARY ASPERMITTED ABOVE, BE LIABLE TO YOU FOR DAM-AGES, INCLUDING ANY GENERAL, SPECIAL, INCI-DENTAL OR CONSEQUENTIAL DAMAGES ARISINGOUT OF THE USE OR INABILITY TO USE THELIBRARY (INCLUDING BUT NOT LIMITED TO LOSSOF DATA OR DATA BEING RENDERED INACCU-RATE OR LOSSES SUSTAINED BY YOU OR THIRDPARTIES OR A FAILURE OF THE LIBRARY TO OPER-ATE WITH ANY OTHER SOFTWARE), EVEN IF SUCHHOLDER OR OTHER PARTY HAS BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES.

Eula


250 Crossways Park Drive, Woodbury, New York 11797www.harmankardon.comHarman Consumer Group, Inc.:2, Route de Tours, 72500 Château-du-Loir, France© 2007 Harman Kardon, Incorporated Partnumber: 25A08G-0DMC0-Q00


DMC 1000 Digital Media Centerdl.owneriq.net/7/7809b626-06bd-4a0c-a001-2cb177dcdcc7.pdfDMC 1000...

Documents

Transcript of DMC 1000 Digital Media Centerdl.owneriq.net/7/7809b626-06bd-4a0c-a001-2cb177dcdcc7.pdfDMC 1000...