G:\IES Projects\2014 Projects\14021 Quirk West Building\Contract Documents\14021 DM-100.dwg
AutoCAD SHX Text
SCALE: 1/8"= 1'-0"
AutoCAD SHX Text
REMOVE AND DISPOSE OF EXISTING EXHAUST FAN. REMOVE AND DISPOSE OF EXISTING AIR HANDLING UNIT. REMOVE AND DISPOSE OF EXISTING DIFFUSER/GRILLE, AND ASSOCIATED DUCTWORK AS SHOWN BY HATCH. REMOVE AND DISPOSE OF EXISTING BASEBOARD HEATING CAP PIPING FOR FUTURE USE. REMOVE DUCTWORK FOR SHAFT RELOCATION AS SHOWN BY HATCH. RELOCATE COOLING TOWER PIPING AS REQUIRED BY SHAFT RELOCATION FROM THE ELEVATOR EXPANSION/REPLACEMENT.
G:\IES Projects\2014 Projects\14021 Quirk West Building\Contract Documents\14021 DM-101.dwg
AutoCAD SHX Text
SCALE: 1/8"= 1'-0"
AutoCAD SHX Text
REMOVE AND DISPOSE OF EXISTING EXHAUST FAN. REMOVE AND DISPOSE OF EXISTING AIR HANDLING UNIT. REMOVE AND DISPOSE OF EXISTING DIFFUSER/GRILLE, AND ASSOCIATED DUCTWORK AS SHOWN BY HATCH. REMOVE AND DISPOSE OF EXISTING BASEBOARD HEATING CAP PIPING FOR FUTURE USE. REMOVE DUCTWORK FOR SHAFT RELOCATION AS SHOWN BY HATCH. RELOCATE COOLING TOWER PIPING AS REQUIRED BY SHAFT RELOCATION FROM THE ELEVATOR EXPANSION/REPLACEMENT.
G:\IES Projects\2014 Projects\14021 Quirk West Building\Contract Documents\14021 DM-102.dwg
AutoCAD SHX Text
SCALE: 1/8"= 1'-0"
AutoCAD SHX Text
REMOVE AND DISPOSE OF EXISTING EXHAUST FAN. REMOVE AND DISPOSE OF EXISTING AIR HANDLING UNIT. REMOVE AND DISPOSE OF EXISTING DIFFUSER/GRILLE, AND ASSOCIATED DUCTWORK AS SHOWN BY HATCH. REMOVE AND DISPOSE OF EXISTING BASEBOARD HEATING CAP PIPING FOR FUTURE USE. REMOVE DUCTWORK FOR SHAFT RELOCATION AS SHOWN BY HATCH. RELOCATE COOLING TOWER PIPING AS REQUIRED BY SHAFT RELOCATION FROM THE ELEVATOR EXPANSION/REPLACEMENT.
TYPICAL DUCT DETAILS WITH SINGLE LINE REPRESENTATION
ENERGY RECOVERY VENTILATOR DETAIL
ROOF TOP CONDENSING UNIT DETAIL
ERV-1 ASSOCIATED HOT WATER COIL DETAIL
AIR HANDLING UNIT DRAIN TRAP DETAIL
EQUIPMENT SUPPORT ROOF CURB DETAIL
BASEBOARD RADIATION DETAIL
ROOF MOUNTED EXHAUST FAN DETAIL
AutoCAD SHX Text
G:\IES Projects\2014 Projects\14021 Quirk West Building\Contract Documents\14021 M-200.dwg
AutoCAD SHX Text
NOTES: : 1. PROVIDE VOLUME DAMPERS IN EVERY MAIN SUPPLY BRANCH AND DIFFUSER BRANCH AS SHOWN ABOVE. 2. PROVIDE VOLUME DAMPER IN EVERY MAIN RETURN BRANCH AND DIFFUSER BRANCH. 3. PROVIDE VOLUME DAMPER IN EVERY MAIN EXHAUST BRANCH AND DIFFUSER BRANCH. 4. PROVIDE ADDITIONAL VOLUME DAMPERS AS SHOWN ON CONTRACT DOCUMENTS. 5. PROVIDE ADDITIONAL VOLUME DAMPERS AS REQUIRED FOR BALANCING OF SUPPLY, RETURN AND EXHAUST AIR SYSTEMS.
AutoCAD SHX Text
DIFFUSER BRANCH
AutoCAD SHX Text
DUCT (TYPICAL)
AutoCAD SHX Text
VD
AutoCAD SHX Text
VD
AutoCAD SHX Text
(TYPICAL)
AutoCAD SHX Text
VOLUME DAMPER
AutoCAD SHX Text
MAIN BRANCH DUCT
AutoCAD SHX Text
VD
AutoCAD SHX Text
VD
AutoCAD SHX Text
MAIN SUPPLY DUCT
AutoCAD SHX Text
PROVIDE HARD DUCTWORK CONNECTION TO DIFFUSER, TYPICAL.
AutoCAD SHX Text
VOLUME DAMPER SHALL BE LOCATED MINIMUM 5'-0" FROM DIFFUSER, TYPICAL.
AutoCAD SHX Text
N.T.S.
AutoCAD SHX Text
FINISHED CEILING
AutoCAD SHX Text
NOTES: 1.FLEXIBLE DUCTWORK TO HAVE A FLEXIBLE DUCTWORK TO HAVE A MAXIMUM RADIUS TURN OF 90°2.FLEXIBLE DUCTWORK IS NOT TO FLEXIBLE DUCTWORK IS NOT TO LAY ON CEILING STRUCTURE
AutoCAD SHX Text
1/4" x 1/2" LONG SHEETMETAL SCREW
AutoCAD SHX Text
ATTACH FLEXIBLE DUCTWORK TO SQUARE TO ROUND TRANSITION WITH NYLON STRAP. SEAL JOINT WITH DUCT TAPE.
AutoCAD SHX Text
SQUARE TO ROUND TRANSITION
AutoCAD SHX Text
CEILING PAD
AutoCAD SHX Text
CEILING GRID
AutoCAD SHX Text
FLUSH MOUNTED CENTER OF CEILING PAD CEILING DIFFUSER
AutoCAD SHX Text
SLIP/DRIVE FULL LENGTH OF T-BAR CEILING GRID. ATTACH TO DIFFUSER WITH (2) 1/4" SHEETMETAL SCREWS. TYPICAL FOR BOTH SIDES OF DIFFUSER.
AutoCAD SHX Text
OPPOSED BLADE DAMPER
AutoCAD SHX Text
INSULATED DUCT SIZE PER PLANS. MAXIMUM LENGTH SHALL NOT EXCEED 8'-0".
AutoCAD SHX Text
24 GAUGE GALVANIZED SHEETMETAL HANGER ATTACH TO STRUCTURE ABOVE
AutoCAD SHX Text
N.T.S.
AutoCAD SHX Text
SHEETMETAL SCREW
AutoCAD SHX Text
1/4"x1/2" LONG SHEETMETAL SCREW
AutoCAD SHX Text
26 GAUGE GALVANIZED SHEETMETAL HANGER. ATTACH TO STRUCTURE ABOVE.
AutoCAD SHX Text
INSULATED DUCTWORK SIZE PER PLANS
AutoCAD SHX Text
OPPOSED BLADE BUTTERFLY DAMPER
AutoCAD SHX Text
FLUSH MOUNTED CEILING DIFFUSER LOCATED AT CENTER OF CEILING TILE
AutoCAD SHX Text
FINISHED CEILING
AutoCAD SHX Text
N.T.S.
AutoCAD SHX Text
FINISHED CEILING
AutoCAD SHX Text
NOTES: 1.FLEXIBLE DUCTWORK TO HAVE A FLEXIBLE DUCTWORK TO HAVE A MAXIMUM RADIUS TURN OF 90°2.FLEXIBLE DUCTWORK IS NOT TO FLEXIBLE DUCTWORK IS NOT TO LAY ON CEILING STRUCTURE
AutoCAD SHX Text
1/4" x 1/2" LONG SHEETMETAL SCREW
AutoCAD SHX Text
ATTACH FLEXIBLE DUCTWORK TO SQUARE TO ROUND TRANSITION WITH NYLON STRAP. SEAL JOINT WITH DUCT TAPE.
AutoCAD SHX Text
SQUARE TO ROUND TRANSITION
AutoCAD SHX Text
CEILING PAD
AutoCAD SHX Text
CEILING GRID
AutoCAD SHX Text
T-BAR LAY-IN CEILING DIFFUSER
AutoCAD SHX Text
SLIP/DRIVE FULL LENGTH OF T-BAR CEILING GRID. ATTACH TO DIFFUSER WITH (2) 1/4" SHEETMETAL SCREWS. TYPICAL FOR BOTH SIDES OF DIFFUSER.
AutoCAD SHX Text
OPPOSED BLADE BUTTERFLY DAMPER
AutoCAD SHX Text
INSULATED SIZE PER PLANS. MAXIMUM LENGTH SHALL NOT EXCEED 6'-0".
AutoCAD SHX Text
24 GAUGE GALVANIZED SHHETMETAL HANGER ATTACH TO STRUCTURE ABOVE
AutoCAD SHX Text
N.T.S.
AutoCAD SHX Text
SCALE: N.T.S.
AutoCAD SHX Text
SCALE: N.T.S.
AutoCAD SHX Text
PULL ROD
AutoCAD SHX Text
SPLITTER DAMPER
AutoCAD SHX Text
SPLITTER DAMPER
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
PULL ROD
AutoCAD SHX Text
45°TAP
AutoCAD SHX Text
OBD
AutoCAD SHX Text
LONG RADIUS TEE SUPPLY DUCTS ONLY
AutoCAD SHX Text
D+D1
AutoCAD SHX Text
D
AutoCAD SHX Text
D1
AutoCAD SHX Text
AIR FLOW
AutoCAD SHX Text
LONG RADIUS TEE RETURN DUCTS ONLY
AutoCAD SHX Text
1 1/2W
AutoCAD SHX Text
AIR FLOW
AutoCAD SHX Text
TAKEOFF RETURN DUCTS ONLY
AutoCAD SHX Text
AIR FLOW
AutoCAD SHX Text
45°
AutoCAD SHX Text
20°
AutoCAD SHX Text
TAKEOFF SUPPLY DUCTS ONLY
AutoCAD SHX Text
45°
AutoCAD SHX Text
AIR FLOW
AutoCAD SHX Text
30°
AutoCAD SHX Text
TAKEOFF SUPPLY DUCTS ONLY
AutoCAD SHX Text
D1
AutoCAD SHX Text
D+D1
AutoCAD SHX Text
D
AutoCAD SHX Text
AIR FLOW
AutoCAD SHX Text
20°
AutoCAD SHX Text
TYPICAL TURNING VANE SUPPLY AND RETURN DUCTS
AutoCAD SHX Text
1"R
AutoCAD SHX Text
2"R
AutoCAD SHX Text
1"
AutoCAD SHX Text
1"
AutoCAD SHX Text
1"
AutoCAD SHX Text
1"
AutoCAD SHX Text
SQUARE ELBOW SUPPLY AND RETURN DUCTS
AutoCAD SHX Text
DOUBLE THICKNESS TURNING VANES
AutoCAD SHX Text
FULL RADIUS ELBOW SUPPLY AND RETURN DUCTS
AutoCAD SHX Text
1 1/2 W
AutoCAD SHX Text
FLOOR
AutoCAD SHX Text
SD
AutoCAD SHX Text
SD
AutoCAD SHX Text
TO EXHAUST LOUVER
AutoCAD SHX Text
INTERNAL DUCT LINING FOR FIRST 10' SUPPLY AND EXHAUST.
AutoCAD SHX Text
N.T.S
AutoCAD SHX Text
DUCTWORK SIZE PER PLAN
AutoCAD SHX Text
TO SUPPLY LOUVER
AutoCAD SHX Text
4" HOUSEKEEPING PAD
AutoCAD SHX Text
ELECTRIC DISCONNECT AND CONDUIT BY DIV. 16
AutoCAD SHX Text
SMOKE DETECTOR
AutoCAD SHX Text
EXHAUST FROM SPACE
AutoCAD SHX Text
DUCTWORK SIZE PER PLAN
AutoCAD SHX Text
SUPPLY TO SPACE
AutoCAD SHX Text
CONTROL WIRE BY DIV. 15 CONDUIT RUN BY DIV. 16
AutoCAD SHX Text
MINIMUM 12" HIGH PREFABRICATED AND INSULATED EQUIPMENT SUPPORT CURB BY MECHANICAL CONTRACTOR. TYPICAL OF TWO (2) FOR CONDENSING UNIT.
AutoCAD SHX Text
ROOF DECK
AutoCAD SHX Text
ROOF INSULATION
AutoCAD SHX Text
EQUIPMENT SHALL BE SECURELY FASTENED TO SUPPORT CURB TO RESIST ALL GRAVITY, WIND AND SEISMIC LOADS.
AutoCAD SHX Text
EQUIPMENT
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
FUSED DISCONNECT SWITCH BY DIVISION 16
AutoCAD SHX Text
6"X6"X8" HIGH COPPER PITCH POCKET WITH WITH CAP. SOLDER ALL JOINTS FOR A WATERTIGHT INSTALLATION.
AutoCAD SHX Text
ROOF FLASHING
AutoCAD SHX Text
CANT STRIP
AutoCAD SHX Text
SERVICE VALVES
AutoCAD SHX Text
CONDENSING UNIT
AutoCAD SHX Text
EQUIPMENT SUPPORT
AutoCAD SHX Text
ROOF FLASHING
AutoCAD SHX Text
CANT STRIP
AutoCAD SHX Text
EQUIPMENT SUPPORT EXTEND 6" BEYOND FULL LENGTH OF CONDENSING UNIT.
AutoCAD SHX Text
N.T.S.
AutoCAD SHX Text
PITCH DN.
AutoCAD SHX Text
PITCH UP
AutoCAD SHX Text
BALL VALVE (TYPICAL)
AutoCAD SHX Text
1 " DIA RETURN PIPE14" DIA RETURN PIPE
AutoCAD SHX Text
1 " DIA SUPPLY PIPE14" DIA SUPPLY PIPE
AutoCAD SHX Text
STRAINER WITH BRASS CAP IN DRAIN DISCHARGE
AutoCAD SHX Text
CONTROL VALVE
AutoCAD SHX Text
MANUAL AIR VENT (TYPICAL)
AutoCAD SHX Text
BALL VALVE WITH BRASS CAP
AutoCAD SHX Text
UNION (TYPICAL
AutoCAD SHX Text
UNION (TYPICAL)
AutoCAD SHX Text
DRAIN PAN
AutoCAD SHX Text
CONDENSATE DRAIN LIONE. SIZE PER PLANS.
AutoCAD SHX Text
CLEAN OUT
AutoCAD SHX Text
PITCH DOWN TOWARD DRAIN
AutoCAD SHX Text
CLEAN OUT
AutoCAD SHX Text
TO FLOOR DRAIN. TERMINATE OPEN END OVER FLOOR DRAIN
AutoCAD SHX Text
FIN-TUBE ELEMENT
AutoCAD SHX Text
BALL VALVE (SHUTOFF)
AutoCAD SHX Text
RETURN HTR
AutoCAD SHX Text
FINISHED FLOOR
AutoCAD SHX Text
COLUMB TYPICAL
AutoCAD SHX Text
TOP OF ENCLOSURE 18" A.F.F.
AutoCAD SHX Text
BOTTOM OF ENCLOSURE 4" A.F.F. MIN.
AutoCAD SHX Text
T
AutoCAD SHX Text
SUPPLY HTS
AutoCAD SHX Text
N.T.S.
AutoCAD SHX Text
N.T.S.
AutoCAD SHX Text
N.T.S.
AutoCAD SHX Text
CONTROL VALVE
AutoCAD SHX Text
N.T.S.
AutoCAD SHX Text
COUNTERFLASHING BY GENERAL CONTRACTOR CAULK AND SEAL BETWEEN CURB AND FLASHING AND COUNTERFLASHING
G:\IES Projects\2014 Projects\14021 Quirk West Building\Contract Documents\14021 M-201.dwg
AutoCAD SHX Text
ABOVE FINISHED FLOOR
AutoCAD SHX Text
AFF
AutoCAD SHX Text
AIR HANDLING UNIT
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AMBIENT
AutoCAD SHX Text
AMB
AutoCAD SHX Text
AMPERE (AMP, AMPS)
AutoCAD SHX Text
AMP
AutoCAD SHX Text
BALANCE
AutoCAD SHX Text
BAL
AutoCAD SHX Text
BRITISH THERMAL UNIT
AutoCAD SHX Text
BTU
AutoCAD SHX Text
CAPACITY
AutoCAD SHX Text
CAP
AutoCAD SHX Text
CUBIC FEET PER MINUTE
AutoCAD SHX Text
CFM
AutoCAD SHX Text
CHILLED WATER SUPPLY
AutoCAD SHX Text
CHWS
AutoCAD SHX Text
CHILLED WATER RETURN
AutoCAD SHX Text
CHWR
AutoCAD SHX Text
COOLING
AutoCAD SHX Text
CLG
AutoCAD SHX Text
CONDENSING UNIT
AutoCAD SHX Text
CU
AutoCAD SHX Text
ENTERING AIR TEMPERATURE
AutoCAD SHX Text
EAT
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
EF
AutoCAD SHX Text
EXTERNAL STATIC PRESSURE
AutoCAD SHX Text
ESP
AutoCAD SHX Text
EXPANSION TANK
AutoCAD SHX Text
ET
AutoCAD SHX Text
ENTERING WATER TEMPERATURE
AutoCAD SHX Text
EWT
AutoCAD SHX Text
EXHAUST
AutoCAD SHX Text
EXH
AutoCAD SHX Text
DEGREES FAHRENHEIT
AutoCAD SHX Text
%%DF
AutoCAD SHX Text
FIRE DAMPER
AutoCAD SHX Text
FD
AutoCAD SHX Text
FEET PER MINUTE
AutoCAD SHX Text
FPM
AutoCAD SHX Text
FEET
AutoCAD SHX Text
FT
AutoCAD SHX Text
FIN TUBE RADIATION
AutoCAD SHX Text
FTR
AutoCAD SHX Text
GALLONS PER HOUR
AutoCAD SHX Text
GPH
AutoCAD SHX Text
GALLONS PER MINUTE
AutoCAD SHX Text
GPM
AutoCAD SHX Text
HOT WATER COIL
AutoCAD SHX Text
HWC
AutoCAD SHX Text
HORSE POWER
AutoCAD SHX Text
HP
AutoCAD SHX Text
HEATING RETURN (HOT WATER)
AutoCAD SHX Text
HTR
AutoCAD SHX Text
HEATING SUPPLY (HOT WATER)
AutoCAD SHX Text
HTS
AutoCAD SHX Text
HEATING
AutoCAD SHX Text
HTG
AutoCAD SHX Text
FREQUENCY
AutoCAD SHX Text
Hz
AutoCAD SHX Text
INCH
AutoCAD SHX Text
IN.
AutoCAD SHX Text
INCHES WATER GAUGE
AutoCAD SHX Text
IN. WG
AutoCAD SHX Text
LEAVING AIR TEMPERATURE
AutoCAD SHX Text
LAT
AutoCAD SHX Text
POUNDS
AutoCAD SHX Text
LBS
AutoCAD SHX Text
LEAVING WATER TEMPERATURE
AutoCAD SHX Text
LWT
AutoCAD SHX Text
BTU PER HOUR (THOUSAND)
AutoCAD SHX Text
MBH
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
N.T.S.
AutoCAD SHX Text
OUTSIDE AIR
AutoCAD SHX Text
O.A.
AutoCAD SHX Text
OPEN END DUCT
AutoCAD SHX Text
OED
AutoCAD SHX Text
PUMP
AutoCAD SHX Text
P-1
AutoCAD SHX Text
PRESSURE DROP
AutoCAD SHX Text
PD
AutoCAD SHX Text
PHASE
AutoCAD SHX Text
PH
AutoCAD SHX Text
POUNDS PER SQUARE INCH
AutoCAD SHX Text
PSI
AutoCAD SHX Text
REGISTER DIFFUSER GRILLE
AutoCAD SHX Text
RDG
AutoCAD SHX Text
RETURN
AutoCAD SHX Text
RET
AutoCAD SHX Text
RELATIVE HUMIDITY
AutoCAD SHX Text
RH
AutoCAD SHX Text
ROTATIONS PER MINUTE
AutoCAD SHX Text
RPM
AutoCAD SHX Text
SQUARE FEET
AutoCAD SHX Text
SQ.FT.
AutoCAD SHX Text
SUPPLY
AutoCAD SHX Text
SUP
AutoCAD SHX Text
TEMPERATURE & PRESSURE RELIEF VALVE
AutoCAD SHX Text
T&P
AutoCAD SHX Text
TYPICAL
AutoCAD SHX Text
TYP
AutoCAD SHX Text
UNIT HEATER
AutoCAD SHX Text
UH
AutoCAD SHX Text
UNLESS OTHERWISE NOTED
AutoCAD SHX Text
UON
AutoCAD SHX Text
VOLUME DAMPER
AutoCAD SHX Text
VD
AutoCAD SHX Text
VERIFY IN FIELD
AutoCAD SHX Text
VIF
AutoCAD SHX Text
WET BULB
AutoCAD SHX Text
WB
AutoCAD SHX Text
HUMIDIFIER
AutoCAD SHX Text
H-1
AutoCAD SHX Text
POUNDS PER HOUR
AutoCAD SHX Text
LBS/HR
AutoCAD SHX Text
SUMP PUMP
AutoCAD SHX Text
SP-1
AutoCAD SHX Text
WORKING PRESSURE
AutoCAD SHX Text
WP
AutoCAD SHX Text
ZONE CONTROLLER
AutoCAD SHX Text
ZC
AutoCAD SHX Text
ZONE VALVE
AutoCAD SHX Text
ZV
AutoCAD SHX Text
AIR FLOW DIRECTION INDICATOR - RETURN
AutoCAD SHX Text
AIR FLOW DIRECTION INDICATOR - SUPPLY
AutoCAD SHX Text
M
AutoCAD SHX Text
1.THE MECHANICAL CONTRACTOR SHALL REMOVE ALL MECHANICAL THE MECHANICAL CONTRACTOR SHALL REMOVE ALL MECHANICAL EQUIPMENT, ACCESSORIES, CONTROLS AND ASSOCIATED PIPING AS SHOWN OR INDICATED ON THE DRAWINGS. 2.NO EQUIPMENT OR DEVICES THAT HAVE BEEN DISCONNECTED AND OR NO EQUIPMENT OR DEVICES THAT HAVE BEEN DISCONNECTED AND OR ABANDONED SHALL REMAIN. 3.THE MECHANICAL CONTRACTOR SHALL VISIT THE SITE AND BECOME THE MECHANICAL CONTRACTOR SHALL VISIT THE SITE AND BECOME FAMILIAR WITH THE EXISTING SYSTEMS AND CONDITIONS IN AREAS OF RENOVATION. 4.ANY SYSTEMS OR EQUIPMENT TO REMAIN ACTIVE DURING RENOVATION ANY SYSTEMS OR EQUIPMENT TO REMAIN ACTIVE DURING RENOVATION SHALL BE KEPT IN OPERATION BY PROVIDING TEMPORARY CONNECTIONS AS REQUIRED UNTIL NEW SYSTEMS ARE INSTALLED AND OPERATIONAL. 5.THE MECHANICAL CONTRACTOR SHALL COORDINATE WITH THE OWNER, THE MECHANICAL CONTRACTOR SHALL COORDINATE WITH THE OWNER, CM, AND OR GENERAL CONTRACTOR ANY AND ALL PHASING OF THE MECHANICAL DEMOLITION WORK IN ORDER TO SATISFY THE CONSTRUCTION SCHEDULE AND OWNERS OCCUPANCY REQUIREMENTS. 6.ANY MECHANICAL EQUIPMENT TO BE REMOVED AND REUSED OR ANY MECHANICAL EQUIPMENT TO BE REMOVED AND REUSED OR TURNED OVER TO THE OWNER, AT OWNERS REQUEST, OR AS INDICATED ON THE DRAWINGS SHALL BE CAREFULLY REMOVED AND STORED TO PREVENT DAMAGE. 7.THE MECHANICAL CONTRACTOR SHALL ALSO REVIEW THE THE MECHANICAL CONTRACTOR SHALL ALSO REVIEW THE ARCHITECTURAL DEMOLITION DRAWINGS AS PART OF THIS CONTRACT FOR ADDITIONAL INFORMATION AND REQUIREMENTS. 8.ALL SERVICE INTERRUPTIONS SHALL BE COORDINATED AND APPROVED ALL SERVICE INTERRUPTIONS SHALL BE COORDINATED AND APPROVED WITH THE OWNER IN ADVANCE PRIOR TO COMMENCEMENT OF ANY WORK. 9.THE MECHANICAL CONTRACTOR SHALL COORDINATE HIS DEMOLITION THE MECHANICAL CONTRACTOR SHALL COORDINATE HIS DEMOLITION WORK WITH THAT OF OTHER TRADES IN ORDER TO AVOID CONFLICTS.
AutoCAD SHX Text
CONNECT TO EXISTING
AutoCAD SHX Text
OR
AutoCAD SHX Text
PIPE EXPANSION FITTING (AT BLDG. EXP.JOINTS)
AutoCAD SHX Text
PIPE DROP
AutoCAD SHX Text
PIPE RISE
AutoCAD SHX Text
PIPE ANCHOR
AutoCAD SHX Text
PLUGGED OR CAPPED PIPE
AutoCAD SHX Text
PIPE GUIDE or SLEEVE
AutoCAD SHX Text
GAS PRESSURE REGULATOR
AutoCAD SHX Text
TEMPERATURE GAUGE
AutoCAD SHX Text
PRESSURE GAUGE
AutoCAD SHX Text
STRAINER - 'Y' TYPE
AutoCAD SHX Text
UNION
AutoCAD SHX Text
BALANCING VALVE
AutoCAD SHX Text
BALL VALVE
AutoCAD SHX Text
CHECK VALVE
AutoCAD SHX Text
3-WAY VALVE (MOTORIZED)
AutoCAD SHX Text
SOLENOID VALVE
AutoCAD SHX Text
GAS VALVE (BALL OR PLUG)
AutoCAD SHX Text
HOSE BIBB (H.B.)
AutoCAD SHX Text
TEMPERATURE & PRESSURE RELIEF VALVE (T&P)
AutoCAD SHX Text
CIRCULATOR PUMP
AutoCAD SHX Text
REFRIGERANT SUCTION LINE
AutoCAD SHX Text
RLL
AutoCAD SHX Text
RSL
AutoCAD SHX Text
HOT WATER RETURN - HEATING
AutoCAD SHX Text
CONDENSATE WASTE
AutoCAD SHX Text
HOT WATER SUPPLY - HEATING
AutoCAD SHX Text
HTS
AutoCAD SHX Text
CD
AutoCAD SHX Text
HTR
AutoCAD SHX Text
REFRIGERANT LIQUID LINE
AutoCAD SHX Text
DIRECTION OF FLOW
AutoCAD SHX Text
PIPE DOWN
AutoCAD SHX Text
GRILLE/REGISTER - RETURN
AutoCAD SHX Text
GRILLE/REGISTER - EXHAUST
AutoCAD SHX Text
DUCT RISER - RETURN/EXHAUST
AutoCAD SHX Text
DUCT DROP - RETURN/EXHAUST
AutoCAD SHX Text
DUCT RISER - SUPPLY/COMBUSTION AIR
AutoCAD SHX Text
DUCT DROP - SUPPLY/COMBUSTION AIR
AutoCAD SHX Text
T
AutoCAD SHX Text
THERMOSTAT
AutoCAD SHX Text
VOLUME DAMPER
AutoCAD SHX Text
MOTORIZED DAMPER
AutoCAD SHX Text
REDUCER
AutoCAD SHX Text
EXISTING TO BE REMOVED
AutoCAD SHX Text
DIFFUSER/GRILLE - SUPPLY
AutoCAD SHX Text
ROUND DUCT DN
AutoCAD SHX Text
ROUND DUCT UP
AutoCAD SHX Text
1.THESE GENERAL NOTES ARE APPLICABLE TO ALL MECHANICAL DRAWINGS. THESE GENERAL NOTES ARE APPLICABLE TO ALL MECHANICAL DRAWINGS. 2.DRAWINGS ARE DIAGRAMMATIC AND SHOW GENERAL INTENT OF WORK. DRAWINGS ARE DIAGRAMMATIC AND SHOW GENERAL INTENT OF WORK. SEE DETAILS, SCHEDULES AND SPECIFICATIONS FOR ADDITIONAL INFORMATION. 3.MECHANICAL CONTRACTOR MUST REVIEW DRAWINGS OF THE OTHER MECHANICAL CONTRACTOR MUST REVIEW DRAWINGS OF THE OTHER TRADES AS PART OF THIS CONTRACT FOR ADDITIONAL WORK REQUIRED AND OR COORDINATION OF HIS WORK FOR OPERATIONS OR CONNECTIONS TO OTHER SYSTEMS. 4.CONTROLS FOR EXISTING EQUIPMENT SHALL BE BY OTHERS AND ARE CONTROLS FOR EXISTING EQUIPMENT SHALL BE BY OTHERS AND ARE NOT PART OF THIS CONTRACT.
AutoCAD SHX Text
NOTES: 1.PROVIDE CONDENSATE TO NEAREST APPROPRIATE FLOOR DRAIN PROVIDE CONDENSATE TO NEAREST APPROPRIATE FLOOR DRAIN 2.PROVIDE REFRIGERANT PIPING BETWEEN INDOOR UNIT AND OUTDOOR UNIT PER MANUFACTURERS RECOMMENDATION PROVIDE REFRIGERANT PIPING BETWEEN INDOOR UNIT AND OUTDOOR UNIT PER MANUFACTURERS RECOMMENDATION 3.PROVIDE ELECTRONIC CONTROLS TO SATISFY THE SEQUENCE OF OPERATIONPROVIDE ELECTRONIC CONTROLS TO SATISFY THE SEQUENCE OF OPERATION
AutoCAD SHX Text
GENERAL DATA
AutoCAD SHX Text
DX COIL DATA
AutoCAD SHX Text
HOT WATER COIL DATA
AutoCAD SHX Text
ELECTRICAL DATA
AutoCAD SHX Text
NOTES
AutoCAD SHX Text
SYMBOL
AutoCAD SHX Text
MANUFACTURER MODEL NUMBER
AutoCAD SHX Text
AREA SERVED
AutoCAD SHX Text
LOCATION
AutoCAD SHX Text
COOLING (CFM)
AutoCAD SHX Text
HEATING (CFM)
AutoCAD SHX Text
ESP (IN)
AutoCAD SHX Text
MOTH/HP
AutoCAD SHX Text
O.A.
AutoCAD SHX Text
TOTAL COOLING (MBH)
AutoCAD SHX Text
SENSIBLE COOLING (MBH)
AutoCAD SHX Text
ROOM TEMP (DEG F°)
AutoCAD SHX Text
REL HUM %
AutoCAD SHX Text
DEW POINT TEMP (DEG F°)
AutoCAD SHX Text
FACE VELOCITY (FPM)
AutoCAD SHX Text
#HIGH/ ROW/ F.P.I.
AutoCAD SHX Text
TOTAL HEATING (MBH)
AutoCAD SHX Text
EAT (DEG F°)
AutoCAD SHX Text
LAT (DEG F°)
AutoCAD SHX Text
AIR PD (IN. WG)
AutoCAD SHX Text
WATER FLOW (GPM)
AutoCAD SHX Text
EWT (DEG F°)
AutoCAD SHX Text
LWT (DEG F°)
AutoCAD SHX Text
WPD (FT)
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text
MOP
AutoCAD SHX Text
MCA-VOLT-PH
AutoCAD SHX Text
DHU-1
AutoCAD SHX Text
POOL PAK HCDV3500-3.0E-DEE-R410
AutoCAD SHX Text
030 POOL
AutoCAD SHX Text
124 MECH
AutoCAD SHX Text
5000
AutoCAD SHX Text
5000
AutoCAD SHX Text
1.20
AutoCAD SHX Text
1/3.0
AutoCAD SHX Text
1400
AutoCAD SHX Text
139
AutoCAD SHX Text
75
AutoCAD SHX Text
84
AutoCAD SHX Text
60
AutoCAD SHX Text
69
AutoCAD SHX Text
800
AutoCAD SHX Text
2/10
AutoCAD SHX Text
218
AutoCAD SHX Text
78
AutoCAD SHX Text
118.2
AutoCAD SHX Text
.44
AutoCAD SHX Text
22.3
AutoCAD SHX Text
180
AutoCAD SHX Text
160
AutoCAD SHX Text
3.4
AutoCAD SHX Text
ELECTRONIC
AutoCAD SHX Text
40
AutoCAD SHX Text
29-460-3
AutoCAD SHX Text
1, 2, 3
AutoCAD SHX Text
DHU-2
AutoCAD SHX Text
POOL PAK HCDV3500-3.0E-DEE-R410
AutoCAD SHX Text
030 POOL
AutoCAD SHX Text
124 MECH
AutoCAD SHX Text
5000
AutoCAD SHX Text
5000
AutoCAD SHX Text
1.20
AutoCAD SHX Text
1/3.0
AutoCAD SHX Text
1400
AutoCAD SHX Text
139
AutoCAD SHX Text
75
AutoCAD SHX Text
84
AutoCAD SHX Text
60
AutoCAD SHX Text
69
AutoCAD SHX Text
800
AutoCAD SHX Text
2/10
AutoCAD SHX Text
218
AutoCAD SHX Text
78
AutoCAD SHX Text
118.2
AutoCAD SHX Text
.44
AutoCAD SHX Text
22.3
AutoCAD SHX Text
180
AutoCAD SHX Text
160
AutoCAD SHX Text
3.4
AutoCAD SHX Text
ELECTRONIC
AutoCAD SHX Text
40
AutoCAD SHX Text
29-460-3
AutoCAD SHX Text
1, 2, 3
AutoCAD SHX Text
DESIGNATIONS:
AutoCAD SHX Text
NECK
AutoCAD SHX Text
SYMBOL
AutoCAD SHX Text
S1-150
AutoCAD SHX Text
6"%%C
AutoCAD SHX Text
TYPES: L.S.-LINEAR SLOT -LINEAR SLOT LINEAR SLOT L.B.-LINEAR BAR -LINEAR BAR LINEAR BAR D.D.-DIRECTIONAL DIFFUSER -DIRECTIONAL DIFFUSER DIRECTIONAL DIFFUSER P.F.-PERFORATED FACE -PERFORATED FACE PERFORATED FACE L.F.-LOUVERED FACE -LOUVERED FACE LOUVERED FACE C.C.-CUBE CORE -CUBE CORE CUBE CORE S.W.-SIDE WALL -SIDE WALL SIDE WALL S.W./C.G.-SIDE WALL OR CEILING NOTES: 1.SQUARE TO ROUND TRANSITION. SQUARE TO ROUND TRANSITION. 2.OPPOSED BLADE DAMPER. OPPOSED BLADE DAMPER. 3.DOUBLE DEFLECTION. DOUBLE DEFLECTION. 4.FACE VELOCITY 600 FPM MAX. FACE VELOCITY 600 FPM MAX. 5.45 DEFLECTION (FIXED). 45° DEFLECTION (FIXED).6.45 DEFLECTION (FULLY ADJUSTABLE). 45° DEFLECTION (FULLY ADJUSTABLE).7.NC LEVEL NOT TO EXCEED 25. NC LEVEL NOT TO EXCEED 25. 8.INSULATED PLENUM BOOT. INSULATED PLENUM BOOT. 9.HINGED CORE WITH 1" DISPOSABLE FILTER.HINGED CORE WITH 1" DISPOSABLE FILTER.
AutoCAD SHX Text
SIZE
AutoCAD SHX Text
TYPICAL RDG
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
(CFM)
AutoCAD SHX Text
SYMBOL
AutoCAD SHX Text
MANUFACTURER MODEL NUMBER
AutoCAD SHX Text
DUTY
AutoCAD SHX Text
TYPE
AutoCAD SHX Text
BORDER TYPE
AutoCAD SHX Text
CONSTRUCTION
AutoCAD SHX Text
NOTES
AutoCAD SHX Text
OBD
AutoCAD SHX Text
FRAME
AutoCAD SHX Text
BLADES
AutoCAD SHX Text
S1
AutoCAD SHX Text
PRICE AMD
AutoCAD SHX Text
SUPPLY
AutoCAD SHX Text
DD
AutoCAD SHX Text
T-BAR LAY-IN
AutoCAD SHX Text
-
AutoCAD SHX Text
ALUM
AutoCAD SHX Text
ALUM
AutoCAD SHX Text
4, 7
AutoCAD SHX Text
S2
AutoCAD SHX Text
KEES 1A
AutoCAD SHX Text
SUPPLY
AutoCAD SHX Text
CC
AutoCAD SHX Text
FLUSH
AutoCAD SHX Text
-
AutoCAD SHX Text
STAINLESS STEEL
AutoCAD SHX Text
STAINLESS STEEL
AutoCAD SHX Text
4, 7
AutoCAD SHX Text
R1
AutoCAD SHX Text
PRICE 635
AutoCAD SHX Text
RETURN
AutoCAD SHX Text
LF
AutoCAD SHX Text
FLUSH
AutoCAD SHX Text
-
AutoCAD SHX Text
ALUM
AutoCAD SHX Text
ALUM
AutoCAD SHX Text
4, 7
AutoCAD SHX Text
E1
AutoCAD SHX Text
PRICE 81
AutoCAD SHX Text
EXHAUST
AutoCAD SHX Text
CC
AutoCAD SHX Text
FLUSH
AutoCAD SHX Text
-
AutoCAD SHX Text
ALUM
AutoCAD SHX Text
ALUM
AutoCAD SHX Text
4, 7
AutoCAD SHX Text
R2/E2
AutoCAD SHX Text
KEES SSEC
AutoCAD SHX Text
RETURN/ EXHAUST
AutoCAD SHX Text
CC
AutoCAD SHX Text
FLUSH
AutoCAD SHX Text
-
AutoCAD SHX Text
STAINLESS STEEL
AutoCAD SHX Text
STAINLESS STEEL
AutoCAD SHX Text
4, 7
AutoCAD SHX Text
SYMBOL
AutoCAD SHX Text
MANUFACTURER MODEL NUMBER
AutoCAD SHX Text
LOCATION
AutoCAD SHX Text
O.A. CFM
AutoCAD SHX Text
O.A. ESP (IN. WG)
AutoCAD SHX Text
O.A. MOTOR HP
AutoCAD SHX Text
EXHAUST (CFM)
AutoCAD SHX Text
EXHAUST ESP (IN. WG)
AutoCAD SHX Text
EXHAUST MOTOR HP
AutoCAD SHX Text
WINTER DESIGN PARAMETERS
AutoCAD SHX Text
WINTER SUPPLY TEMP (DB/WB DEG)
AutoCAD SHX Text
HOT WATER COIL
AutoCAD SHX Text
SUMMER DESIGN PARAMETERS
AutoCAD SHX Text
SUMMER SUPPLY TEMP (DB/WB DEG)
AutoCAD SHX Text
MOTOR DATA MCA-VOLT-PH
AutoCAD SHX Text
MOP
AutoCAD SHX Text
FILTER (%EFF-SIZE)
AutoCAD SHX Text
WEIGHT (LBS)
AutoCAD SHX Text
NOTES
AutoCAD SHX Text
O.A. (DB/WB)
AutoCAD SHX Text
INDOOR (DB)
AutoCAD SHX Text
FLOW (GPM)
AutoCAD SHX Text
CAPACITY (MBH)
AutoCAD SHX Text
# HIGH/# WIDE ROWS/F.P.I.
AutoCAD SHX Text
VELOCITY (FPM)
AutoCAD SHX Text
EAT/LAT (DEG F)
AutoCAD SHX Text
EWT/LWT (DEG F)
AutoCAD SHX Text
APD (IN WS)
AutoCAD SHX Text
WPD (IN WS)
AutoCAD SHX Text
O.A. (DB/WB)
AutoCAD SHX Text
INDOOR (DB)
AutoCAD SHX Text
ERV-1
AutoCAD SHX Text
RENEWAIRE HE2XINH
AutoCAD SHX Text
124 MECHANICAL
AutoCAD SHX Text
1600
AutoCAD SHX Text
0.5
AutoCAD SHX Text
1.5
AutoCAD SHX Text
1600
AutoCAD SHX Text
1.0
AutoCAD SHX Text
2.0
AutoCAD SHX Text
2.0/0.3
AutoCAD SHX Text
70
AutoCAD SHX Text
48.9/39.3
AutoCAD SHX Text
9.0
AutoCAD SHX Text
90
AutoCAD SHX Text
20"x30"/2/10
AutoCAD SHX Text
800
AutoCAD SHX Text
48.9/109.6
AutoCAD SHX Text
180/157.2
AutoCAD SHX Text
1.9
AutoCAD SHX Text
91.0/73.0
AutoCAD SHX Text
75
AutoCAD SHX Text
80.0/67.8
AutoCAD SHX Text
6.0-460-3
AutoCAD SHX Text
15
AutoCAD SHX Text
MERV 8
AutoCAD SHX Text
414
AutoCAD SHX Text
1, 2, 3, 4, 5
AutoCAD SHX Text
NOTES: 1.PROVIDE FUSE DISCONNECT PROVIDE FUSE DISCONNECT 2.PROVIDE DOUBLE WALL CONSTRUCTION PROVIDE DOUBLE WALL CONSTRUCTION 3.PROVIDE MOTORIZED ISOLATION DAMPERS ON BOTH AIRSTREAMS PROVIDE MOTORIZED ISOLATION DAMPERS ON BOTH AIRSTREAMS 4.PROVIDE FACTORY MOUNTED FILTER ALARMS (2) PROVIDE FACTORY MOUNTED FILTER ALARMS (2) 5.PROVIDE MANUFACTURE RECOMMENDED ELECTRONIC CONTROLSPROVIDE MANUFACTURE RECOMMENDED ELECTRONIC CONTROLS
AutoCAD SHX Text
SYMBOL
AutoCAD SHX Text
MANUFACTURER MODEL NUMBER
AutoCAD SHX Text
TYPE
AutoCAD SHX Text
SYSTEM SERVED
AutoCAD SHX Text
TOTAL CAPACITY MBH
AutoCAD SHX Text
SENS. CAPACITY MBH
AutoCAD SHX Text
SUCTION TEMP
AutoCAD SHX Text
AMB AIR TEMP DEG F
AutoCAD SHX Text
ELECTRICAL DATA MCA-VOLT-PH
AutoCAD SHX Text
CU-1
AutoCAD SHX Text
POOL PAK ACC0161
AutoCAD SHX Text
DX
AutoCAD SHX Text
DHU-1
AutoCAD SHX Text
139
AutoCAD SHX Text
75
AutoCAD SHX Text
91
AutoCAD SHX Text
-460-3
AutoCAD SHX Text
CU-2
AutoCAD SHX Text
POOL PAK ACC0161
AutoCAD SHX Text
DX
AutoCAD SHX Text
DHU-2
AutoCAD SHX Text
139
AutoCAD SHX Text
75
AutoCAD SHX Text
91
AutoCAD SHX Text
-460-3
AutoCAD SHX Text
SYMBOL
AutoCAD SHX Text
MANUFACTUER MODEL NUMBER
AutoCAD SHX Text
HOT WATER CAPACITY BTU/HR/LF
AutoCAD SHX Text
EWT (DEG F)
AutoCAD SHX Text
TUBE SIZE
AutoCAD SHX Text
FINS PER FOOT
AutoCAD SHX Text
INSTALLATION HT
AutoCAD SHX Text
ENCLOSURE HT
AutoCAD SHX Text
NOTES
AutoCAD SHX Text
FTR-1
AutoCAD SHX Text
SLANT FIN FS-14
AutoCAD SHX Text
1400
AutoCAD SHX Text
180
AutoCAD SHX Text
3/4
AutoCAD SHX Text
40
AutoCAD SHX Text
18"
AutoCAD SHX Text
14"
AutoCAD SHX Text
1,2
AutoCAD SHX Text
NOTES: 1.PROVIDE END CAPS PROVIDE END CAPS 2.PROVIDE TWO-TIER ELEMENT C-340 PROVIDE TWO-TIER ELEMENT C-340
AutoCAD SHX Text
SYMBOL
AutoCAD SHX Text
MANUFACTURER MODEL NUMBER
AutoCAD SHX Text
SYSTEM SERVED
AutoCAD SHX Text
TYPE
AutoCAD SHX Text
AIR FLOW (CFM)
AutoCAD SHX Text
TOTAL CAPACITY MBH
AutoCAD SHX Text
EAT DEG F°DB
AutoCAD SHX Text
LAT DEG F°DB
AutoCAD SHX Text
WATER FLOW GPM
AutoCAD SHX Text
WATER P.D. FT. HD
AutoCAD SHX Text
EWT/LWT DEG F°
AutoCAD SHX Text
AIR P.D. IN. WG
AutoCAD SHX Text
CC-1
AutoCAD SHX Text
ADP AHW-2417
AutoCAD SHX Text
ERV-1
AutoCAD SHX Text
HW
AutoCAD SHX Text
1600
AutoCAD SHX Text
107
AutoCAD SHX Text
48.9
AutoCAD SHX Text
109.6
AutoCAD SHX Text
9.6
AutoCAD SHX Text
1.9
AutoCAD SHX Text
180/157.2
AutoCAD SHX Text
HW = HOT WATER
AutoCAD SHX Text
FLEXIBLE CONNECTION
AutoCAD SHX Text
FC
AutoCAD SHX Text
SYMBOL
AutoCAD SHX Text
MANUFACTURER MODEL NUMBER
AutoCAD SHX Text
LOCATION/ SERVING
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
TYPE
AutoCAD SHX Text
AIR FLOW CFM
AutoCAD SHX Text
ESP IN. WS.
AutoCAD SHX Text
FAN RPM
AutoCAD SHX Text
DRIVE
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text
BHP (W)
AutoCAD SHX Text
HP (W)
AutoCAD SHX Text
ELECTRICAL V-PH-RPM
AutoCAD SHX Text
SONES (LWA)
AutoCAD SHX Text
NOTES
AutoCAD SHX Text
EF-A
AutoCAD SHX Text
GREENHECK VG-143-3/4
AutoCAD SHX Text
ON ROOF
AutoCAD SHX Text
LOCKERS 232, 233
AutoCAD SHX Text
DOWNBLAST
AutoCAD SHX Text
1990
AutoCAD SHX Text
125
AutoCAD SHX Text
1200
AutoCAD SHX Text
DIRECT
AutoCAD SHX Text
TIME CLOCK
AutoCAD SHX Text
.41
AutoCAD SHX Text
3/4
AutoCAD SHX Text
120-1-1200
AutoCAD SHX Text
12.0
AutoCAD SHX Text
1, 2, 3, 4, 5
AutoCAD SHX Text
EF-B
AutoCAD SHX Text
GREENHECK VG-143-3/4
AutoCAD SHX Text
ON ROOF
AutoCAD SHX Text
LOCKERS
AutoCAD SHX Text
DOWNBLAST
AutoCAD SHX Text
2200
AutoCAD SHX Text
125
AutoCAD SHX Text
1300
AutoCAD SHX Text
DIRECT
AutoCAD SHX Text
TIME CLOCK
AutoCAD SHX Text
.41
AutoCAD SHX Text
3/4
AutoCAD SHX Text
120-1-1200
AutoCAD SHX Text
13.0
AutoCAD SHX Text
1, 2, 3, 4, 5
AutoCAD SHX Text
NOTES: 1.PROVIDE ROOF CURB PROVIDE ROOF CURB 2.PROVIDE BACK DRAFT DAMPER PROVIDE BACK DRAFT DAMPER 3.PROVIDE BIRD SCREEN PROVIDE BIRD SCREEN 4.PROVIDE SPEED CONTROLLER PROVIDE SPEED CONTROLLER 5.PROVIDE TIME CLOCKPROVIDE TIME CLOCK