DIN ISO 815

ICS 83.060 Elastomere – Bestimmung des Druckverformungsrestes bei Umgebungs-, erhöhten oder niedrigen Temperaturen (ISO 815 : 1991 + Corrigendum 1 : 1993) This standard incorporates International Standard ISO 815 Rubber, vulcanized or thermoplastic – Determination of compression set at ambient, elevated or low temperatures (including Technical Corrigendum 1 : 1993). A comma is used as the decimal marker. National foreword This standard has been prepared by ISO/TC 45. The responsible German body involved in its preparation was the Normenausschuss Materialprüfung (Ma- terials Testing Standards Committee), Technical Committee Prüfung der physikalischen Eigenschaften von Kautschuk und Elastomeren. The DIN Standards corresponding to the International Standards referred to in clause 2 of the ISO Standard are as follows: ISO 471 DIN ISO 471 ISO 4648 DIN 53534 ISO 4661-1 DIN ISO 4661-1 Amendments DIN 53517, April 1987 edition, has been superseded by the specifications of DIN ISO 815. Previous editions DIN 53511-3: 1940x-12; DIN 53517: 1960-07, 1987-04; DIN 53517-1: 1972-01; DIN 53517-2: 1972-01. National Annex NA Standard referred to (and not included in Normative references) DIN 53534 Determination of the linear dimensions of rubber test pieces and products Ref. No. DIN ISO 815 : 2000-03 English price group 09 Sales No. 0409 07.00 DEUTSCHE NORM March 2000 ISO 815 { ISO Standard comprises 11 pages. © No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). Vulcanized and thermoplastic rubber Determination of compression set at ambient, elevated or low temperatures (ISO 815 : 1991 + Technical Corrigendum 1 : 1993) Supersedes DIN 53517, April 1987 edition.

Upload
jastreb-sxe
Category

Documents
view
2.943
download
274

TAGS:

Embed Size (px):

description

standard

Transcript of DIN ISO 815

ICS 83.060

Elastomere Bestimmung des Druckverformungsrestes beiUmgebungs-, erhhten oder niedrigen Temperaturen(ISO 815 : 1991 + Corrigendum 1 : 1993)

This standard incorporates International Standard

ISO 815 Rubber, vulcanized or thermoplastic Determination of compression set at ambient, elevated orlow temperatures (including Technical Corrigendum 1 : 1993).

A comma is used as the decimal marker.

National forewordThis standard has been prepared by ISO/TC 45.The responsible German body involved in its preparation was the Normenausschuss Materialprfung (Ma-terials Testing Standards Committee), Technical Committee Prfung der physikalischen Eigenschaften vonKautschuk und Elastomeren.The DIN Standards corresponding to the International Standards referred to in clause 2 of the ISO Standardare as follows:

ISO 471 DIN ISO 471ISO 4648 DIN 53534ISO 4661-1 DIN ISO 4661-1

AmendmentsDIN 53517, April 1987 edition, has been superseded by the specifications of DIN ISO 815.

Previous editionsDIN 53511-3: 1940x-12; DIN 53517: 1960-07, 1987-04; DIN 53517-1: 1972-01; DIN 53517-2: 1972-01.

National Annex NAStandard referred to(and not included in Normative references)

DIN 53534 Determination of the linear dimensions of rubber test pieces and products

Ref. No. DIN ISO 815 : 2000-03English price group 09 Sales No. 0409

07.00

DEUTSCHE NORM March 2000

ISO 815{

ISO Standard comprises 11 pages.

No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

Vulcanized and thermoplastic rubberDetermination of compression set at ambient, elevated or

low temperatures(ISO 815 : 1991 + Technical Corrigendum 1 : 1993)

Supersedes DIN 53517,April 1987 edition.
Page 1ISO 815 : 1991

Rubber, vulcanized or thermoplasticDetermination of compression set at ambient, elevated or low temperatures
Page 2ISO 815 : 1991
Page 3ISO 815 : 1991
Page 4ISO 815 : 1991
Page 5ISO 815 : 1991
Page 6ISO 815 : 1991
Page 7ISO 815 : 1991
Page 8ISO 815 : 1991
Page 9ISO 815 : 1991
Page 10ISO 815 : 1991
Page 11ISO 815 : 1991

Beuth Verlag GmbH2001-12-11T15:50:29+010012163 BerlinDIN Deutsches Institut fuer Normung e. V.Dokument ist zertifiziert