Sentidos opuestos-Dime 1. A.P.G. V Sentidos opuestos-Dime 2.
Dime Nci Ones
-
Upload
julio-rosas-pezo -
Category
Documents
-
view
217 -
download
3
description
Transcript of Dime Nci Ones
![Page 1: Dime Nci Ones](https://reader036.fdocuments.net/reader036/viewer/2022082901/56d6bebb1a28ab3016935f51/html5/thumbnails/1.jpg)
EXPLORE the WORLD of PIPINGDOCS MATL SOCY PIPES FLANGES FTTG VALVES BOLTS GASKETS EQPT SPECIALS STEEL DIN STEAM OTHERS
Dimensions Reducing Thredolets® - MSS SP97
Class 3000NPS A B C
![Page 2: Dime Nci Ones](https://reader036.fdocuments.net/reader036/viewer/2022082901/56d6bebb1a28ab3016935f51/html5/thumbnails/2.jpg)
1/2 INCHMM
125.40
1.13/3235.71
15/1623.81
3/4 INCHMM
1.1/1626.98
1.23/3243.65
1.5/3229.36
1 INCHMM
1.5/1633.33
250.80
1.7/1636.51
1.1/4 INCHMM
1.5/1633.33
2.9/1665.08
1.3/444.45
1.1/2 INCHMM
1.3/834.92
2.27/3272.23
250.80
2 INCHMM
1.1/238.10
3.15/3288.10
2.9/1665.08
2.1/2 INCHMM
1.13/1646.03
4.1/16103.18
376.20
3 INCHMM
250.80
4.13/16122.23
3.11/1693.66
3.1/2 INCHMM
2.1/853.975
5.7/32132.55
4101.6
4 INCHMM
2.1/457.15
5.31/32151.60
4.3/4120.65
5 INCHMM
2.5/866.67
7.5/16185.73
5.9/16141.28
![Page 3: Dime Nci Ones](https://reader036.fdocuments.net/reader036/viewer/2022082901/56d6bebb1a28ab3016935f51/html5/thumbnails/3.jpg)
6 INCHMM
2.3/469.85
8.5/8219.07
6.11/16169.86
NPS A B C
Class 6000NPS A B C
1/2 INCHMM
1.1/431.75
1.23/3243.65
3/419.05
3/4 INCHMM
1.7/1636.51
1.61/6449.60
125.40
1 INCHMM
1.9/1639.68
2.7/1661.91
1.5/1633.33
1.1/4 INCHMM
1.5/841.27
2.23/3269.05
1.1/238.10
1.1/2 INCHMM
1.11/1642.86
3.1/482.55
1.15/1649.21
2 INCHMM
2.1/1652.38
4.1/32102.39
2.3/469.85
NPS A B C
General notes:
![Page 4: Dime Nci Ones](https://reader036.fdocuments.net/reader036/viewer/2022082901/56d6bebb1a28ab3016935f51/html5/thumbnails/4.jpg)
Root Gap - X - "Space" for welding the O'let is raised off the run pipe to establish proper weld gap by placing spacers, e.g. welding rods, under the fitting. This provides a uniform welding gap between the curvature of the run and base of fitting.
Threaded Ends are in accordance with ASME B1.20.1. Design per MSS SP-97. Source comes from Bonney Forge (except the sizes in millimeters). Thredolet® is a registered name. Another often used name is Threaded Outlet.
http://www.wermac.org/fittings/dimensions_thredolet_reducing_class-3000-6000.html