DIGITOOL Universal Fume Extractor DataSheet...including Mimaki, Mutoh, Roland, Epson, HP…...

2
© 2014 DIGIPRINT SUPPLIES™. All rights reserved. Reproduction in whole or in part without written permission is prohibited. All other brands and product names are registered trademarks or trademarks of their respective owners. Design & specifications are subject to change without notice. Some functions may require options, which may or may not be available at time of launch. Every company has the responsibility for the health and safety of their employees and this is a legal requirement in many countries. Whereas most grand format solvent printers are equipped with an air purification system, many wide format printers work without air purification in many printshops. This represents a risk that can be easily resolved with a small investment. DIGIPRINT SUPPLIES Universal Fume Extractor is designed for the filtration of hazardous fumes and dusts generated by digital eco- solvent, dye-sublimation, solvent and UV printer. Fume extraction helps protect health, keep the performance of the printer at the highest level and decrease environmental pollution. Ink fumes from printers should be controlled as they are unpleasant in the production environment and can cause headaches and nausea. DIGITOOL fume extractor draws the contaminated fumes released by the printer when the ink is applied, heated and dried or cured. The fumes are then drawn through 4 powerful filters where the contaminants are captured : two pre-filters remove the big and heavy particles smoke and dust, a main HEPA filter removes the small particles and a special gas-filter absorbs the odours and the toxic gas. The filtered clean air can then be returned to the workplace. DIGITOOL fume extractor is available with universal connections for all common printer models including Mimaki, Mutoh, Roland, Epson, HP… Universal Fume Extractor Universal Fume Extractor Installed Avoid big risk with a small investment DIGITOOL Universal Fume Extractor DATASHEET

Transcript of DIGITOOL Universal Fume Extractor DataSheet...including Mimaki, Mutoh, Roland, Epson, HP…...

Page 1: DIGITOOL Universal Fume Extractor DataSheet...including Mimaki, Mutoh, Roland, Epson, HP… Universal Fume Extractor Universal Fume Extractor Installed Avoid big risk with a small

© 2014 DIGIPRINT SUPPLIES™. All rights reserved. Reproduction in whole or in part without written permission is prohibited. All other brands and product names are registered trademarks or trademarks of their respective owners. Design & specifi cations are subject to change without notice. Some functions may require options, which may or may not be available at time of launch.

Every company has the responsibility for the health and safety of their employees and this is a legal requirement in many countries. Whereas most grand format solvent printers are equipped with an air purifi cation system, many wide format printers work without air purifi cation in many printshops. This represents a risk that can be easily resolved with a small investment.

DIGIPRINT SUPPLIES Universal Fume Extractor is designed for the fi ltration of hazardous fumes and dusts generated by digital eco-solvent, dye-sublimation, solvent and UV printer. Fume extraction helps protect health, keep the performance of the printer at the highest level and decrease environmental pollution.

Ink fumes from printers should be controlled as they are unpleasant in the production environment and can cause headaches and nausea.

DIGITOOL fume extractor draws the contaminated fumes released by the printer when the ink is applied, heated and dried or cured. The fumes are then drawn

through 4 powerful fi lters where the contaminants are captured : two pre-fi lters remove the big and heavy particles smoke and dust, a main HEPA fi lter removes the small particles and a special gas-fi lter absorbs the odours and the toxic gas. The fi ltered clean air can then be returned to the workplace.

DIGITOOL fume extractor is available with universal connections for all common printer models including Mimaki, Mutoh, Roland, Epson, HP…

Universal Fume Extractor

Universal Fume Extractor Installed

Avoid big risk with a small investment

DIGITOOL Universal Fume ExtractorDATASHEET

Page 2: DIGITOOL Universal Fume Extractor DataSheet...including Mimaki, Mutoh, Roland, Epson, HP… Universal Fume Extractor Universal Fume Extractor Installed Avoid big risk with a small

© 2014 DIGIPRINT SUPPLIES™. All rights reserved. Reproduction in whole or in part without written permission is prohibited. All other brands and product names are registered trademarks or trademarks of their respective owners. Design & specifications are subject to change without notice. Some functions may require options, which may or may not be available at time of launch.

FEATURES & BENEFITS• Keeps the working environment free of fumes and smells.• Universal system with a small foot print that can be used with a wide variety of printers.• Sturdy metal enclosure with easy access to filter for cleaning / replacing.• Industry standard robust blower motor guarantees a long life span.• Special sound-absorbing materials and a low-noise blower assure minimum noise impact on the working environment.• 4 layer filter modules for optimal filtration, protecting your operators from hazardous fumes and particles.• Easy operation• ISO certified• One year warranty .

G3 PRIM

ARY

FILTER

5 μm and bigger

between 1 and 5 μm

between 0.01 and 1 μm

gas

F5 MED

IUM

FILTERH

13 MA

INFILTER (H

EPA)

GA

S FILTER(AC

TIVATED CA

RBON

)

FRESHA

IR

The Filtration process

PRODUCT SPECIFICATIONS

Maximum Airflow: 1.000 m3/hInput Power 750WPower: 220V / 50HzAir Pressure 2000 PaFilters: 4 filters (ranging from 0.01 to 5 μm)Filtration Rate: > 99.7% @ 0.3 μmNoise Rate: < 60 dBADimensions 500 x 500 x 1250 mmWeight: 75 kgInlet Diameter: 200mmCompatibility: ROLAND (SP-300 / SP-540 / VP-300 / VP-540 / VS-

300 / VS-420 / VS-540 / VS-640 / RS-640 / SJ-645ex / SJ-745ex / SJ-1000 / SJ-1045ex / XC-540 / XJ-540 / XJ-640 / SJ-740 / SC-540 / SC-545ex)MIMAKI (JV3 / JV33 / JV5 / JV34 / CJV30 / UJF-3042 / UJF-605/ JF / JFX / UJV-100 / UJF-160)MUTOH (Rockhopper / Blizzard / Spitfire / Viper / ValueJet / Osprey / Zephyr)EPSON (Stylus Pro GS6000 / SureColor Family)HP (8000s / 9000s / 10000s)SEIKO (ColorPainter 64s / 100s / H-74s / H-104s / V-64s / W-54s / W-64s / M-64s)

APPLICATION

Print usin eco-solvent,dye-sublimation, solvent or

UV inks

Extract hazardous fumes and dusts using the

Universal Fume Extractor

Keep your working environment healthy and

clean.

Print Fresh AirExtract

DIGITOOL Universal Fume ExtractorDATASHEET