Digital recording system (Geo Physics)
-
Upload
junaid-sanwal -
Category
Science
-
view
70 -
download
1
Transcript of Digital recording system (Geo Physics)
Submitted by:
Muhammad Junaid YounisHafiz Zohaib Tariq Muhammad UmairSaqlain AbbasZaheer-ul-Din Babar
Submitted to:
Mam Aqsa Malik
Introduction
Components of Digital recording system
Octal Number system
Hexa Number system
Binary & Decimal number
Magnetic Tape
Procedure of recording the seismic signals
Properties of Digital recording system
Disadvantage of Digital recording system
Process of recording the seismic waves in Digital form.
It developed in 1963.
It based on binary numbers(0,1).
Multiplexer:It is high speed switch.It connect to each geophone signal and forwed it.It forwed the signals.
Capacitor:It charge by the incoming signals.
Amplifier:It enhance the signals.
A/D converter:It has different combination of standard voltages.It provide the exact voltages combination according to signals.
Formatter:Voltage pulses are converted into control signals.These signals activate the Recorder.
Digital recorder:It record the signals and paste on the magnetic tape.
The base of the octal number system is 8 which is 2^3
i.e 2^3=8
Octal Binary
0 000
1 001
2 010
3 011
4 100
5 101
6 110
7 111
The base of the hexa decimal number system is 16 which is 2^4i.e 2^4=16The base of the hexa decimal number system is 16 which is 2^4i.e 2^4=16
Hexa Binary
0 0000
1 0001
2 0010
3 0011
4 0100
5 0101
6 0110
7 0111
Hexa Binary
8 1000
9 1001
10 1010
11 1011
12 1100
13 1101
14 1110
15 1111
The binary numbers are 0,1
The decimal number is 2452 245
2 122-1
2 61-0
2 30-1
2 15-0
2 7-1
2 3-1
1-1
245=11110101
Conversion of decimal into Binary number
Magnetic Tape
• It is a medium for magnetic recording , made of a thin magnetizable coating on a long, narrow strip of plastic film. •It was developed in Germany, based on magnetic wire recording. •Devices that record and play back audio and video using magnetic tape aretaperecorders and video tape recorders.• A device that stores computer data on magnetic tape is a tape drive.
Bit
Word
Word
Byte
1. Its width is 1/2 – 1 inch.
2. One square is called Bit.
3. Single row of Bit is called Byte.
Digital recording system(Figure)
::
Geophone
Seismic cableMultiplexer
A/D Converter
Formatter
Digital tape recorder
Digital tape
Multiplexer:It is high speed switch.It connect to each geophone signal and forwed it.It forwed the signals.
Capacitor:It charge by the incoming signals.
Amplifier:It enhance the signals.
A/D converter:It has different combination of standard voltages.It provide the exact voltages combination according to signals.
Formatter:Voltage pulses are converted into control signals.These signals activate the Recorder.
Digital recorder:It record the signals and paste on the magnetic tape.
1. It is time save process
2. Its components easy to transport
3. It comprise only binary numbers(0,1)
4. It stored the maximum data on magnetic tape
Disadvantage of Digital recording system
The overlapping or mix up data provide.
These systems have poor multi users interfaces.
Data can become corrupted.
Confusing array of formats and recording systems.