Digital Menu Board Ceiling Mount Installation Instructions · 2019. 9. 12. · Digital Menu Board...
Transcript of Digital Menu Board Ceiling Mount Installation Instructions · 2019. 9. 12. · Digital Menu Board...
www.microndisplaysolutions.com
Digital Menu Board Ceiling Mount
Installation Instructions
M2T4249C M3T4249C
Digital Menu Board 4249 Ceiling Mount Installation Manual Page 2 Rev. 04/19
Table of Contents
Important Safety Instructions............................................................................................................................. 3
Models and Specifications .................................................................................................................................. 4
Configuration and Drawings .............................................................................................................................. 5
Package Contents .............................................................................................................................................. 6
Step 1 – Using a Two (2) Wide or Three (3) Wide Mount Only ....................................................................... 7
Step 2A – Joining 2W and 3W Menu Board Mounts to make a 4W or Greater Mount (42” & 43”) .................. 8
Step 2B – Joining 2W and 3W Menu Board Mounts to make a 5W or Greater Mount (46”+) .......................... 9
Step 3 – Mounting to Ceiling ......................................................................................................................... 10
Step 4 – Tilt Mechanism Adjustment ............................................................................................................ 10
Step 5 – Attaching End Caps .......................................................................................................................... 10
Step 6 – Attaching VESA Panel Brackets & Mounting Monitors .................................................................... 11
Step 7 – Installing Monitor Security Locks (Optional Item) ........................................................................... 12
Step 8 – Installing Cable Tie Clamps (Optional Item) ..................................................................................... 12
Warranty ........................................................................................................................................................... 13
Digital Menu Board 4249 Ceiling Mount Installation Manual Page 3 Rev. 04/19
Important Safety Instructions
Use the following safety guidelines to help protect you during the installation, especially with installing the video panels to mount and when access to panels is required to ensure your own personal safety.
• Read all the installation instructions before installing the mounting solution.
• Read and follow all important safety instructions.
• Depending on size of mount, two (2) persons may be required for installation.
• Please ensure all safety precautions are followed when working with heights.
CAUTION: Before you begin any of the installation procedures read and follow the warnings and important safety instructions within the manual.
WARNING!
FAILURE TO FOLLOW INSTRUCTIONS ON ACCESSING BEHIND PANELS AND SERVICING PANELS MAY RESULT IN POSSIBLE PERSONAL INJURY AND DAMAGE TO VIDEO PANELS DUE FROM FALLING!
BEFORE INSTALLING THE MOUNT, ENSURE THE CEILING IS STRUCTUALLY SOUND AND ABLE TO PROPERLY SUPPORT THE COMBINED WEIGHT OF MOUNT AND VIDEO PANELS!
Cat No. M2T4249C and M3T4249C
Tested and Evaluated to CSA Model Code SPE-1000, Clause 6.2.8. Testé et évalué selon le code de modèle CSA SPE-1000, article 6.2.8
Warning: Maximum hanging load 100 Kg for M2T4249C and 120 Kg for M3T4249C. Attention: Charge maximale suspendue 100 Kg pour M2T4249C et 120 Kg pour M3T4249C.
Digital Menu Board 4249 Ceiling Mount Installation Manual Page 4 Rev. 04/19
Models and Specifications
Product M2T4249C M3T4249C
Type 2 Wide Tilt Menu Board 3 Wide Tilt Menu Board
Screen Sizes 42” to 49”
Tilt 0 to 15 Degrees
Vesa 200 to 400
Security Locks Included
Weight Load 100 kg 120 kg
Dimensions (WxHxD)
With 00 Tilt 1800 x 240 x 100mm 2750 x 240 x 100
Dimensions (WxHxD)
With 150 Tilt 1800 x 240 x 150mm 2750 x 240 x 150mm
Note:
• For 42” to 43” screens sizes, the use of Joiner Rail Assembly not required.
• For greater than 43” screen sizes when joining Digital Menu Board mounts together to make overall 4 wide or larger mount please add 400mm at each joining point to arrive at overall length.
Digital Menu Board 4249 Ceiling Mount Installation Manual Page 5 Rev. 04/19
Configuration
M2T4249C
M3T4249C
Digital Menu Board 4249 Ceiling Mount Installation Manual Page 6 Rev. 04/19
Package Contents Description Model Qty Picture
Preassembled Mount P/N# MD4249CF 2T4249C 1
Part A
Preassembled Mount P/N# MD4249CL (Left) P/N# MD4249CR (Right)
3T4249C 2
Part A
Joiner Rail Assembly – Small (provided if 2 more mounts ordered) P/N# MD4517JR
2T4249C 3T4249C 2
Part JRS
Joiner Rail Assembly – Large (provided if 2 or more mounts ordered) P/N# MD4590JR
2T4249C 3T4249C 1
Part JRL
Panel VESA Bracket P/N# VBM4249
2T4249C 4
Part B
3T4249C 6
End Cap – Small (May be already installed) P/N# MD1044
2T4249C 3T4249C 4
Part ECS
End Cap – Large (May be already installed) P/N# MD1009
2T4249C 3T4249C 2
Part ECL
Hardware P/N# MD4249H
2T4249C 2
Part H 3T4249C 3
Cable Tie Clamp P/N# MD1006
2T4249C 3
Part CC 3T4249C 3
Security Lock P/N# MD1026
2T4249C 2
Part SL
3T4249C 3
Digital Menu Board 4249 Ceiling Mount Installation Manual Page 7 Rev. 04/19
Step 1 – Using a 2 Wide or 3 Wide Mount Only Instructions Diagrams For a two (2) wide mount proceed to Step 3.
Fig. 1A
For a three (3) wide mount the left and right sections need to be joined together using the four (4) joiner bars supplied. See figure 1B. Once they are joined together, tighten screws using 4mm hex wrench. See figure 1C, and 1D.
Fig. 1B
Fig. 1C Fig. 1D
Digital Menu Board 4249 Ceiling Mount Installation Manual Page 8 Rev. 04/19
Step 2A – Joining 2W & 3W Mounts to make a 4W or > (For 42” & 43”) Mount Type Instructions Diagrams For configurations requiring 4W or 6W. • Join a 2W+2W menu
board mount by using the Joiner Bars removed from Joiner Rail Assemblies provided (Part JRS and JRL). See fig.2A, 2B.
• Place Joiner Bars as shown in fig. 2C.
• Tighten screws using 4mm hex wrench once they are in place. See fig. 2D and 2E.
• If required, reposition pipe flanges to desired position.
Fig. 2A Fig. 2B
Fig. 2C
Fig. 2D Fig. 2E
For configurations requiring 5W. • Join a 2W+3W menu
board mount by using the Joiner Bars removed from Joiner Rail Assemblies provided (Part JRS and JRL). See fig.2A, 2B.
• Place Joiner Bars as shown in fig. 2F.
• Tighten screws using 4mm hex wrench once they are in place. See fig. 2D, and 2E.
• If required, reposition pipe flanges.
Fig. 2F
For configurations requiring 6W. • Join a 3W+3W menu
board mount by using the Joiner Bars removed from Joiner Rail Assemblies provided (Part JRS and JRL). See fig.2A, 2B.
• Place Joiner Bars as shown in fig. 2G.
• Tighten screws using 4mm hex wrench once they are in place. See fig. 2D, and 2E.
• If required, reposition pipe flanges.
Fig. 2G
Digital Menu Board 4249 Ceiling Mount Installation Manual Page 9 Rev. 04/19
Step 2B – Joining 2W & 3W Mounts to make a 4W or > (46”+) Mount Type Instructions Diagrams For configurations requiring 4 wide or 6 wide menu boards. • Join a 2W+2W menu
board mount using both Joiner Rail Assemblies provided (Part JRS and JRL). See fig.2A, 2B, 2C.
• Tighten screws using 4mm hex wrench once they are in place. See fig. 2D and 2E.
• If required, reposition pipe flanges to desired position.
Fig. 2A Fig. 2B
Fig. 2C
Fig. 2D Fig. 2E
For configurations requiring 5 wide menu boards. • Join a 2W+3W menu
board mount using both Joiner Rail Assemblies provided (Part JRS and JRL). See fig.2A, 2B, and 2F.
• Tighten screws using 4mm hex wrench once they are in place. See fig. 2D, and 2E.
• If required, reposition pipe flanges.
Fig. 2F
For configurations requiring 6 wide menu boards. • Join a 3W+3W menu
board mount using both Joiner Rail Assemblies provided (Part JRS and JRL). See fig.2A, 2B, and 2G.
• Tighten screws using 4mm hex wrench once they are in place. See fig. 2D, and 2E.
• If required, reposition pipe flanges.
Fig. 2G
Digital Menu Board 4249 Ceiling Mount Installation Manual Page 10 Rev. 04/19
Step 3 –Mounting to Ceiling Instructions Diagrams Attach menu board mount to ceiling structure using threaded pipe.
Step 4 –Tilt Mechanism Adjustment
Instructions Diagrams For a 2 wide mount there is a tilt adjustment mechanism at each end. For a 3 wide mount there are four (4) tilt adjustment mechanisms. The maximum tilt angle is 15 Degrees. • To set desired tilt angle, loosen the tilt
adjustment screws using a 4mm Allen wrench.
• Once you have the desired tilt angle
tighten the tilt adjustment screws.
Fig. 4A
Step 5 – Attaching End Caps Instructions Diagrams • Install the small Black End Caps (if not
already installed) on both ends of mount. See figure 5A, and 5B.
• Use clear silicone (optional) to affix End
Caps.
• Install large End Caps (if not already installed) on both ends as shown in fig. 5A, and 5C by tapping into place.
Fig. 5A Fig. 5B Fig. 5C
Tilt adjustment screw
Tilt safety screw.
DO NOT ADJUST
Small End Cap
Large End Cap
Digital Menu Board 4249 Ceiling Mount Installation Manual Page 11 Rev. 04/19
Step 6 –Attaching VESA Panel Brackets & Mounting Monitors Instructions Diagrams • Remove monitors to be installed from
their cartons and attach the Panel VESA Brackets (Part B) to back of monitors at the VESA mounts as shown in figure 6A. Mounting hardware is provided (Part F).
• The mounting hardware consists of
various lengths of M6 and M8 screws to accommodate different manufacturer specifications.
• If M6 size screws are required, you will
need to use the white M8 reducer sleeves provided. See figure 6B and 6C.
IMPORTANT The video connections and placement of AC plug will vary by model and brand. In the event any of the cabling is in line with the Panel VESA Bracket and interferes, the use of shims/plastic spacers will be required to extend VESA Panel Bracket outwards.
Fig. 6A
Fig. 6B Fig. 6C
• Lift each monitor and position so the upper and lower clamps on each VESA Panel Bracket slide into the t-slot of the frame assembly. See figure 6D.
• Gently slide monitor into desired
position along frame assembly.
• Repeat for each monitor.
Fig. 6D
If you still need assistance with the installation, we are a phone call away at (905)-828-1662.
Digital Menu Board 4249 Ceiling Mount Installation Manual Page 12 Rev. 04/19
Step 7 – Installing Monitor Security Locks (Optional Item) Instructions Diagrams The Monitor Security Locks (Part SL) are used to secure monitor to Top Rail. • Place one (1) Monitor Security Lock on
either the left or right Top Panel Clamp for each monitor. See Figure 7A.
• Once the Monitor Security Lock has
been positioned directly on top of panel clamp, secure the lock by tightening the two (2) screws. See Figure 7B.
Fig. 7A
Fig. 7B
Step 8 – Installing Cable Tie Clamps (Optional Item)
Instructions Diagrams The Cable Tie Clamps are used for cable management and/or to fasten media player to frame assembly, etc. • Insert Cable Tie Clamps where desired
into t-slot and then rotate the Cable Tie Clamp 900 to secure in place.
• Thread cable tie thru the Cable Tie
Clamp as required.
Fig. 8A Fig. 8B
Digital Menu Board 4249 Ceiling Mount Installation Manual Page 13 Rev. 04/19
Warranty Micron Display Solutions (“MICRON”) warrants to the first purchaser for this product (“Product”), when shipped in its original container and sold or distributed in Canada by Micron or by an authorized Micron dealer, and Product was not sold “as is” or “sales final” that the Product will be free from defects in material and workmanship for a period of three (3) years and will within the warranty period, either repair the defective Product or provide the purchaser a replacement of the defective Product.
This warranty does not apply to any appearance items of the product nor to the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, which has been altered or modified in design or construction, or if the serial number or model number affixed to Product has been removed, defaced, changed, altered or tampered with.
Micron Display Solutions 2679 Bristol Circle, Unit 6
Oakville, Ontario L6H 6Z8
(905)-828-1662 www.microndisplaysolutions.com