www.�irsecurity.com/proMNTNX1R_INSTALLATION_DIAGRAM_EN_R2

Dimension (units: mm)

Weight (corner mount adapter only): 1.7kg / 3.7lbs

MNTNX1RCorner Mount Adapter

Make sure to install in an area that can support the weight of the camera and accessories.

Package Contents

Compatible Products

MNTNV16WMNTNV16CMNTNB1XJMNTNB1XJW

DNZ30TL2RMNTNZ30C

Visit www.�irsecurity.com/pro for the latest compatibility list

Corner Mount Adapter 1pcs M8x25 Hex Bolt 4pcsSpring Washer 4pcsFlat Washer 4pcs

170.

0

119.

0

80.0

119.

090

.0

24384.048.0

Φ100.0Φ35.0

Φ56.0

Φ84.0

4-M8 EQU

4-M84-M66-M4

40.0

8-Φ9.0

130.0

138.

0

80.0

Corner Mount Adapter

M8×60 Bolt 4pcs

M8×25 Hex Bolt 4pcs

Flat Washer 4pcsSpring Washer 4pcsNut 4pcs

Spring Washer 4pcsFlat Washer 4pcs

13

2

4

Mark 4 holes through the corner mount adapter.

Drill holes into the surface. Insert the M8x60 bolts (4pcs) into the holes.

Place the corner mount against the wall. Use 1pcs spring washer, 1pcs �at washer, and 1pcs nut on each M8x60 bolt (4pcs) to secure the corner mount adapter to the surface.

5

Place 1pcs spring washer and 1pcs �at washer on each M8x25 hex bolt (4pcs). Attach the mount (not included) to the corner mount adapter using the M8x25 hex bolts (4pcs).

M8x60 Hex Bolt 4pcsSpring Washer 4pcsFlat Washer 4pcsNut 4pcs