Digimatic Height Gauge - thomasskinner.com fileThe first double-sided, multi-edge face milling...

Call 604-207-3117 or 1-866-999-3117 - Place your order online at www.thomasskinner.com

Offers valid May 1st through July 15th, 2016

Be part of our growing online community!

CoroMill® 745The first double-sided, multi-edge face milling concept with the cutting performance of a positive single-sided concept.

CoroTurn® 300Effective, high-quality turning with chip control and long, predictable tool life.

The single most important feature of CoroMill® 745 is the unconventional insert inclination angle. It provides a large positive angle on the main cutting edge for a positive cutting action, leading to excellent chip formation, a smooth, soft sound and low power consumption.Features & Benefits- 14 usable cutting edges per insert.

With CoroTurn® 300 Sandvik Coromant is breaking new grounds within general turning. This 8-edged system is a unique concept that helps you achieve efficient and secure machining to lower your cost per part.Features & Benefits- Chip control and long, predictable tool life High-precision coolant from above controls the chip breaking for secure machining, while under coolant controls the temperature for long and predictable tool life.

- Eight-edged smartness Ensures good heat transformation for predictable performance and wear. More edges mean fewer inserts, which leads to improved inventory control.

- Coolant supply Over and under coolant delivery! By plugging the coolant holes, you can choose between using just over - or under- coolant, or both — which is the standard set-up.

Patented insert positioning system

Secure tip seat with easy insert

indexing

Strong cutter body KP ISO application

area

P ISO application area

- The double-sided multi-edge design is a cost-efficient solution. It offers high productivity and a low cost per edge.

- Reliable tool with secure performance guarantees trouble-free machining.

- The innovative design provides a light cutting action with excellent chip formation, a smooth soft sound and low power consumption.

- Easy handling and secure positioning of inserts for reliable machining.

- Cutter diameters available 2.5”- 10” (63mm - 250mm)

ZertivoTM Grade GC1130 Steel milling evolutionBringing you peace of mind with Zertivo™ grade GC1130- Clean and intact edge offers secure machining with long and predictable insert life

- High metal removal rate even in difficult and unstable conditions

- Great performance in both dry and wet machining

Ask about the expanded GC1130 product offering now available

new innovation

available

May 1

The p63 portable dot peen system is particularly suited for use with heavy or oversized components. Thanks to its portable and compact design, it fits easily into difficult-to-access places. The ergonomic design of the handle and back plate creates a sturdy, well-balanced machine suitable for longterm operation as it reduces user fatigue.

e1-p63c Compact Portable Dot Peen Marking System

Contact your Thomas Skinner Sales Representative for a product demo.

Benefits█ High Mobility

One of the most compact marking guns in the world

█ Ergonomic Design Excellent balancing and comfortable operation

█ Easy to Operate HD colour display with intuitive software

█ Robust Lightweight cast aluminum body for intensive use Order # Price $

E1P63C $6,950FOB Quebec

Digimatic Height Gauge Series 192 - Standard Type w/SPC• Easy-to-use standard type• Carbide-tipped scriber is provided• Double-column structure ensures high measuring accuracy• Coarse/fine feed switching• Measuring range: 0 - 12”• Resolution: .0005 - .0002”• Accuracy: ±.001”• With SPC data output

*Special pricing valid on in-stock units only.

Order # Reg. List $ Special $MTI-19263010 $1,486 $966

Centre Finder• Hardened and ground on all surfaces• Shank Diameter: 3/8”• Tip Diameter: .200”

See page 2 for additional

Mitutoyo products!

SAVE 34%

SAVE 15%

Order # Reg. List $ Special $MTI-050103 $33 $28


Special Offers. Incredible Savings.

BUY ONE GET ONE FREEReceive a FREE CKB6 or CKB5 Shank of any taper type and gauge length with the purchase of any Big Kaiser CK6 2-50 & 2-54 or CK5 2-32 precision finish boring head.Rules:- Promo Code “PROMO-FPKAI”- Applies to both digital and analog boring head purchases- Requires the purchase of all necessary components at normal list price needed to complete the boring head

assembly (applicable boring bar, insert holder, etc.) with the exception of inserts- CKB Smart Damper, Angle Head or Hi-Jet Holder not applicable as free shank

BUY TWO GET ONE FREEBuy two conventional tool holders of any taper type, gauge length or diameter and receive a FREE conventional tool holder of lesser or equal value.Rules:- Promo Code “PROMO-FPBIG”- Applies to standard shell mill holders, end mill holders and shrink fit holders with BCV, BBT, HSK, BIG

CAPTO and CKB tapers- Mix and match tool holder types, interfaces, sizes, gauge lengths, etc.- Lowest valued product(s) will be invoiced at $0.00- Smart Damper and Angle Heads with these outputs are not applicable

BIG KAISER Finish Boring Heads• EWN & EWD are pre-balanced, EWB is balanceable• EWN/EWB analog readout with dial resolution of .0002”/Ø (.00005” w/ Vernier)• EWD digital heads feature .00005”/Ø resolution• Center mount boring bars

EWN/EWB/EWD 2-32• CK5 modular connection, adaptable to virtually any spindle taper & size• Boring range Ø.079”-1.260”

EWN/EWB 2-50 & EWD 2-54• CK6 modular connection, adaptable to virtually any spindle taper & size• EWN 2-50XL boring range Ø.079”-3.150” (side mount insert holder for

Ø3.150”-6.000”)• EWB 2-50 boring range Ø.079”-1.969”• EWD 2-54 boring range Ø.079”-2.126”

BIG KAISER End Mill, Shell Mill & Shrink Fit Holders• Available in BCV/BBT/HSK/CKB/BIG CAPTO dual

contact interfaces• Dual contact provides added rigidity and

process repeatability• Large variety of incremental gauge lengths

and diameters• Excellent inventory• Inch sizes for traditional metric interfaces like

BBT and HSK• Metric sizes for traditional inch interfaces like CV• New High Rigidity shell mill holders made to

2009 ASME B5.50 (CAT) standard (no safe zone)

HIGHER PERFORMANCESUPERIOR FINISH

LONGER TOOL LIFE

U-WAVE Wireless SystemThe U-WAVE system enables easy wireless data communication from a measuring tool to a PC using the Digimatic protocol.• Measurement efficiency is improved by eliminating the long and

cumbersome data cables• The user friendly interface allows data to be loaded into any

software product that accepts keyboard input, such as Excel* or Notepad

Contact your Thomas Skinner Sales Representative today for complete details!

Inside Micrometers

Outside Micrometer Sets

QUALITY PRODUCTS FROM A BRAND YOU CAN TRUST...PRECISION IS OUR PROFESSION!

• Wide range of ID measurements with interchangeable rods

• Sizes of interchangeable rods can be adjusted with spacing collars

Mitutoyo Micrometers have carbide measuring faces!MTI-103137

MTI-103220Range Graduation Order # Reg. List $ Special $

0-25mm 0.01mm 103-137 $116 $93.50 4-5”

.0001”MTI-103219* $201 $162.50

5-6” MTI-103220* $217 $175.00 6-7” MTI-103221* $242 $189.00 6-7”

.001”103-183 $220 $172.00

12-13” 103-189 $440 $344.00 13-14” 103-190 $455 $356.00

*.0001” reading is obtained with vernier

MTI-10390840

RangeNo. of Mic’s

No. of Standards Graduation Order # Reg. List $ Special $

0-3” 3 2 .0001” MTI-103922 $437 $342 0-150mm 6 5 0.01mm 103-913-50 $1,071 $835

0-12” 12 11 .0001” MTI-10390840 $2,283 $1,758

MTI-103922

MTI-141-233

Range GraduationMic Head

Travel # of Rods Order # Reg. List $ Special $2-12”

.001”.5” 5 MTI-141233 $254 $205

8-20” 1” 3 141-121 $449 $351

NEW Coolant Proof Caliper IP67... 22% larger LCD display height of 9mm for improved visibility!... increased battery life from 3 to 5 years!• Simple one-switch design is easy and ergonomic• 100% air leak test ensures every caliper is compliant• Battery cap does not require

a screw driver for battery replacement

• No SPC output

Order # Reg. List $ Special $500-752-20 $251 $202500-753-20 $338 $273

ModelMicrometer

Heads Order # Reg. List $ Special $TM-505B Optional 176-818A $4,738 $4,050

TM-A505B Included 176-820A $6,922 $5,925

NEW Toolmaker’s Microscopes Series 176 - TM505• New LED illuminators provide enhanced observation for higher

accuracy and resolution• Illumination intensity can be adjusted• Included standard accessories create an overall magnification of

30X. Magnifications can be changed from 20 - 200X by using optional objectives and/or eyepieces

• Modified base design with lateral notch for lifting ease• Models TM-505B/TM-A505B: 2 x 2”/ 50 x 50mm measuring

range, 6 x 6” / 152 x 152mm table size, usable area of stage glass 3.8 x 3.8” / 96 x 96mm

Outside Micrometers... all Mitutoyo Micrometers have carbide

measuring faces• Hammertone baked enamel finish• Ratchet stop• With standard setting rods (except for 0-25mm model)

Watch a How-to video... Mitutoyo Caliper to PC Made Easy

SAVE 15%

UPTO

SAVE 20%

UPTO

SAVE 22%

UPTO

SAVE 22%

UPTO

SAVE 23%

UPTO


Haas High-Speed Universal Machining CentreDesigned for 3+2 machining and full 5-axis machining

All Haas Machines F.O.B. OXNARD, CAUMC-750 SS Starting at $186,995 (USD)

All Haas Machines F.O.B. OXNARD, CA

DT-1 Starting at $54,995 (USD)All Haas Machines F.O.B. OXNARD, CA

DM-1 Starting at $64,995 (USD)

Constant Evolution = Higher Productivity

DT-1 Drill/Tap CentreThe DT-1 is a compact, high-speed drill and tap machine with full milling capabilities.

Highlights:• Next Generation Haas Control (NGC)• Highest acceleration rates of all Haas

machines• Lowest tool change time • Reliable mechanical tool changer

design• Good fit for the TRT100 for a low

cost 5-axis machine - Full 5-axis machine in the

smallest footprint

Standard Features:• 20” x 16” 15.5” travels (x, y, x)• BT30 taper spindle• 15 HP vector drive• 15,000 rpm• 2400 ipm rapids• High-speed 20+1 side-mount

tool changer• 20,000 rpm spindle (option)• Through-spindle coolant system(optional)• Dual chip augers (optional)• Programmable coolant nozzle (optional)and so much more!

The DT-1 features a high-speed side-mount tool changer that swaps tools quickly to keep non-cutting time to a minimum.

The Haas-built BT30 taper inline direct-drive spindle provides 15,000 rpm for

high-speed milling, and allows rigid tapping at speeds up

to 5000 rpm.

The DM-1 features a high-speed side-mount tool changer that swaps tools quickly to keep non-cutting time to a minimum.

The Haas-built 40-taper inline direct-drive spindle provides

15,000 rpm for high-speedmilling, and allows high-speed

rigid tapping.

The UMC-750SS’s high-speed trunnion table offers 150 deg/sec rapids to quickly position parts to nearly any angle for 5-sided (3+2) machining, or provide full simultaneous 5-axis motion for contouring and complex machining.

The UMC-750SS is equipped with a 15,000-rpm inline direct-drive spindle, and comes standard with Haas Automation’s powerful high-speed machining control software.

The UMC-750SS is a 5-axis 40-taper vertical machining center with 30” x 20” x 20” travels and an integrated high-speed trunnion table. The machine is equipped with a powerful 15,000-rpm inline direct-drive spindle driven by a 30-HP vector drive system, and comes standard with a high-speed 40+1 high-speed tool side-mount tool changer.

Features and Options:• Next Generation Haas Control (NGC)• Fully 5-axis capable• 1200 ipm (30.5 mpm) rapids• 150°/second rotary speeds• Wireless Intuitive Probing System

standard• Programmable coolant nozzle (optional)• Through-spindle coolant (optional)• Chip conveyor (optional)• Through-Tool Air Blast (TAB) - Supplies high-pressure air through cutting tool - Separate M-codes; functions like TSC - Easy to switch between air and coolant

Thomas Skinner is proud to be the exclusive Haas distributor for Western

Canada. For a complete list of Haas products please visit www.haascnc.com.

FOB Special $ Model Type of Machine Location List $ (USD) (USD)

EC-1600YZT 4-axis HMC s/n 2054444 Vancouver, BC $323,575 $283,820 Mini Mill* CNC VMC s/n 1120329 Edmonton, AB $38,485 $35,275 ST-20* CNC Horizontal Lathe s/n 3104924 Calgary, AB $79,970 $72,255 ST-20* CNC Horizontal Lathe s/n 3104925 Winnipeg, MB $80,670 $72,955 ST-20* CNC Horizontal Lathe s/n 3100851 Richmond, BC $79,970 $69,655 ST-35 CNC Horizontal Lathe BB s/n 3101379 Edmonton, AB $109,470 $97,995 ST-45 CNC Horizontal Lathe BB s/n 3100900 Vancouver, BC $223,565 $193,900 VF-2* CNC VMC s/n 1129132 Calgary, AB $89,545 $80,810 VF-2* CNC VMC s/n 1129135 Winnipeg, MB $90,345 $81,610 VF-2* CNC VMC s/n 1129134 Edmonton, AB $89,545 $80,810 VF-3 CNC VMC s/n 1117085 Vancouver, BC $109,050 $93,410

CURRENT CNC MACHINE TOOL INVENTORY LIST

NEW Next Generation Haas Control (NGC)Simplicity, Consistency, PerformanceThe Next Generation Control (NGC) is the latest update to the machine tool industry’s most user-friendly control. The NGC features an improved user interface, with more consistent and intuitive navigation. The layout and screens are very similar to the past Haas controls, but are better organized and easier to read with updated colours and graphics.

The NGC will allow for future innovation and enhanced features for the Haas control.

The Haas website offers you so much... your personal Haas How-to assistant is @ Haascnc.comStart at the HaasCNC.com home page, where you’ll find everything about Haas machines, and a little bit of everything else. Use Customer Services to access Haas Parts, the DIY Center, Financing and Service.

HaasParts.com Need maintenance items, service replace parts, or ideas on how to enhance your Haas machine for better throughput?Look to the official Haas parts site no matter what your needs.

DIY.HaasCNC.comFind the help you need to make the most of your Haas machine.3 G-Codes / M-Codes3 Operator’s Manuals3 Installation Requirements

FinancingYour factory solution for Haas Equipment Financing3 Personalized Service3 Fast Credit Decisions3 NO Prepayment Penalty

Haas SupportFrom the moment you hit the home page Haas Support is ready to assist you... ‘Hello, please enter your question here and a Haas Expert will assist you.’

*Machines lightly used at the Skills Competition - available to ship mid-May. Special pricing listed is valid on in stock machines only. Please contact us for complete information on the machine configurations.

DM-1 Drill/Mill CentreThe DM-1 is a compact, high-speed machining centre built with proven Haas components and sub-assemblies. It is identical in construction and specifications to the DT-1, but with the substitution of a Haas 40-taper inline spindle and an 18+1 tool changer.

Highlights:• Next Generation Haas Control (NGC)• NEW 40-taper spindle• High-speed 18+1 side-mount tool

changer• Reliable mechanical tool change design• Quick tool change time

Standard Features:• 20” x 16” x 15.5” travels (x, y, x)• 15 HP vector drive• 15,000 rpm• 2400 ipm rapids• Inline direct-drive• Through-spindle coolant

system(optional)• Dual chip augers (optional)• Programmable coolant nozzle (optional)and so much more!


• Serrations are ground, not machined. Jaws do not have to be machined every time.

• High quality, consistent material.• Extremely large assortment of jaws to fit most

model of chucks.• Made in Germany.• Schunk Chuck Jaw App (Apple/Android) simplifies

selection and crossover.• Ground Slots. • Heat Treatable Material.• Jaws will fit other Kitagawa models and

brands ie: Samchully, Autoblok.

Find the jaws you need by using the Schunk

Quick Finder Tool

Applix Taps Overview• Designed for use in multiple applications.• Manufactured from premium quality Powdered Metal.• Will cut a wide range of materials including carbon steel, steel alloys, stainless steel,

aluminum, cast iron, copper, brass and bronze.• DIN lengths with ANSI shanks allow for extra reach when compared with standard

ANSI taps.• TiCN (Titanium Carbon Nitride) coating provides extra hardness = longer tool life and

better performance • Available in Coolant Through.• Available in inch and metric sizes.

PFX Parabolic Drill Overview• Premium Cobalt High Speed Steel (HSS-E) combines the properties of retained hot

hardness and toughness. • Multiple Applications- Ideal for working in a wide range of materials.• All drills feature a parabolic flute design for increased chip space and improved chip

evacuation capabilities. • Parabolic flute design allows greater hole depths to be achieved in some cases without the

need for pecking. • A thick web increases the structural strength of the drill for greater rigidity and minimizes

the risk of drill breakage. • In addition, the special point geometry promotes excellent centering - eliminating the

requirement for a pilot hole - and reduces thrust force and power requirements.• PFX drills come in 3xd, 5xd, 10xd, 20xd, and 25xd.

PFX Screw Machine Drill Multi-Application, Premium Cobalt Screw Machine Length Parabolic Flute for Advanced Chip Removal - Series A920

PFX Jobber Length Drill Premium Cobalt Jobber Length Parabolic Flute for Advanced Chip Removal - Series A900

MANY OTHER SIZES AVAILABLE!

d1 l2 l1

Order # Special $Øh8

Inch mm mm1/16 22 48 DOR-0046340 $9.15 5/64 25 51 DOR-0046395 $8.40 3/32 32 57 DOR-0046449 $8.20 7/64 38 67 DOR-0046494 $8.40 1/8 41 70 DOR-0046548 $7.00

9/64 44 73 DOR-0046593 $8.95 3/16 59 89 DOR-0046746 $9.00 7/32 64 95 DOR-0046852 $20.00 1/4 70 102 DOR-0046951 $17.35

5/16 81 114 DOR-0047170 $29.25 3/8 92 127 DOR-0047392 $30.45

7/16 103 140 DOR-0047545 $66.50 31/64 111 149 DOR-0047620 $78.70 1/2 101 151 DOR-0047644 $120.60

• Heavy-Duty parabolic flute design allows greater drilling depths in one pass.

• Notched point improves chip formation. • Premium cobalt base material increases

wear resistance.• Bright finish improves chip flow in soft or

non-ferrous materials. • 3XD• Point angle 130 degree.

• Heavy-Duty parabolic flute design allows greater drilling depths in one pass.

• Notched Point improves chip formation. • Premium cobalt base material increases

wear resistance. • Bright finish improves chip flow in soft or

non-ferrous materials. • 6XD. • Point angle 130 degree.

Applix MXL Spiral Flute Taps Semi-Bottoming Series 1676AP • Designed for blind hole tapping in a

variety of materials with a hardness up to 350HB

• Inch sizes available in sizes #4 to 1” UNC/UNF• Metric sizes available M4 to M24 MANY OTHER SIZES AVAILABLE!

Spiral Flute - ANSI shank, DIN lengthSize Order # Special $

#4 - 40 PTD-46204912 $19.80#10 - 32 PTD-46204895 $19.801/4 - 20 PTD-46204892 $21.905/16 - 18 PTD-46204903 $26.903/8 - 16 PTD-46204900 $31.257/16 - 14 PTD-46204908 $46.601/2 - 13 PTD-46204890 $54.95

Applix MXP Spiral Point TapsSeries 1672AP Plug Chamfer • Designed for through hole tapping

in a variety of materials with a hardness up to 350HB

• Inch sizes available in Sizes #4 to 1” UNC/UNF• Metric sizes available M4 to M24 MANY OTHER SIZES AVAILABLE!

Spiral Point - ANSI shank, DIN lengthSize Order # Special $

#8 - 32 PTD-46204869 $13.80 #10 - 32 PTD-46204852 $13.80 1/4 - 20 PTD-46204849 $15.30 5/16 - 18 PTD-46204860 $17.05 3/8 - 16 PTD-46204857 $19.40 7/16 - 14 PTD-46204865 $25.10 1/2 - 13 PTD-46204847 $29.00

MANY OTHER SIZES AVAILABLE!

d1 l2 l1

Order # Special $Øh8

Inch mm mm1/16 16 41 DOR-0050644 $7.20 5/64 17 43 DOR-0050705 $6.65 3/32 19 41 DOR-0050767 $6.50 7/64 21 46 DOR-0050835 $6.65 1/8 22 48 DOR-0050880 $6.60 9/64 24 49 DOR-0050934 $4.85 3/16 29 56 DOR-0051092 $8.80 7/32 32 60 DOR-0051207 $11.30 1/4 35 64 DOR-0051313 $10.60 5/16 41 71 DOR-0051542 $14.25 3/8 46 79 DOR-0051887 $25.05

13/32 49 84 DOR-0051795 $24.25 1/2 57 95 DOR-0052044 $39.80

www.thomasskinner.com*Under 50 Lbs. on stock consumable products.

FREE SHIPPING

! FREE SHIPPIN

G! FREE SHIPPING! FREE

SH

IPPI

NG

! FRE

E

SHIPPING!

FREESHIPPING

Place your order online

& receive FREE

SHIPPING*

Milled Serration Other Brand

Ground Serration from Schunk

Check the SCHUNK Quick Finder Tool

www.us.schunk.com/bqf

Contact your Thomas Skinner Sales Representative for complete details!

Chuck Type Chuck Dia. Description Order # Special $

Kitagawa

8” KM-WBL 80 SCH-0132601 $74.006” KM-WB 61 SCH-0130128 $73.008” KM-WB 88 SCH-0132139 $52.508” KM-WB 85 SCH-0132127 $99.0010” KM-WB 110 SCH-0132140 $71.0010” KM-WB 106 SCH-0132152 $125.0012” KM-WB 126 SCH-0132131 $90.0012” KM-WB 127 SCH-0132148 $148.0015” KM-WB 153 SCH-0132132 $213.50

Aluminum

Kitagawa8” KM-WBAL 80 0132522 $137.0010” KM-WBAL 100 0132523 $148.00

SMW-Autoblok 18” & 20” SWB 400 0120107 $325.00

Note: Prices listed are for sets of 3

SAVE 20%

SAVE 18%


Quality, productivity, efficiency.Okuma is the industry’s only single-source provider, with the CNC machine, drive, motors, encoders, spindle and CNC control all manufactured by Okuma. Okuma’s innovative and reliable CNC machining technology, paired with comprehensive, localized service protection, allows users to run continuously with confidence and maximize profitability. Together Okuma and Thomas Skinner & Son empower our customers enabling competitive advantage in today’s demanding business environments.

— Robust machines...offering better cuts for longer— Consistently tight tolerances...only achieved by hand scraping— Top in class...best Japanese machine in the world— Quiet...energy efficient

Thermo-FriendlyConcept

Standard

MA-H SeriesWhen your business calls for a machine that delivers high productivity without compromising on accuracy, look to the MA-H Series of horizontal machining centres. This proven design platform boasts a series of engineering features guaranteed to achieve results. A high-speed axis feed of 60 m/min provides near instant access to parts, improving productivity and nearly eliminating the need to hold inventory.

A wide range of spindles offers full horsepower from low to high RPM’s. And for extremely high accuracy, Okuma’s double sleeve spindle cooling system balances the spindle head temperature to prevent deformation and ensuring continuous, consistent accuracy. The MA-H Series is the place to turn for the fast creation of precision-crafted components, a true advance in profitability. Multi FMS systems can be field installed and comes standard with a 40 ATC expandable Matrix Magazine up to 218 tools.

MA-600HIIThe MA-600HII horizontal machining centre achieves everything from highly accurate, steady machining of mass production to long, continuous die/mold applications. From heavy-duty cutting to fine, precision work, this HMC is available with a variety of spindles to offer performance to suit a multitude of manufacturing requirements.• Max Travels: 29.37" x 35.43" x 39.37"• Rotary Pallet Size: 24.80" x 24.80"

MA-800HThis high-performance machine gives improved productivity with a large machining area, high-speed rapid feedrate, and reduced running costs thanks to longer spindle service life, easier maintenance, and outstanding lubrication control.• Max Travels: 55.12" x 57.09"• Rotary Pallet Size: 31.50" x 31.50"

MA-12500HBuilt on an integral bed and base and designed with reinforcing ribs for increased stability and load carrying capacity, the MA-12500H incorporates Okuma's exclusive Thermo-Friendly Concept to achieve unparalleled thermal stability and accuracy. Standardly-equipped with a 50 taper 6,000 rpm, 60/50 horsepower spindle, it is also available with either a 12,000 rpm wide range spindle or 4,500 rpm heavy duty spindle. With a maximum load capacity of 11,000 pounds and rapid traverse (X, Y, Z) of 1,653 ipm, the machine provides a good balance of speed and cutting power for machining of aluminum alloys, cast iron and difficult-to-machine materials.• Max Travels: 86.61" x 64.96• Rotary Pallet Size: 49.21" x 49.21"

Collision Avoidance System

Machining Navi

Optional

MA-600HII

MA-12500H

MB-H Series

Thermo-FriendlyConcept

Optional

Collision Avoidance System

Machining Navi

MB-4000H

MB-5000H

The MB-H series provides a unique combination of high-speed and power in a small footprint. Highly productive with a high speed spindle and reduced non-cutting time, the MB-H series is built on the Okuma Thermo-Friendly Concept which enables the machine to predict and counter thermal deformation, ensuring consistent accuracy. Comes standard with a 48 ATC expandable Matrix Magazine up to 218 tools.MB-4000HA high-speed, thermally-stable horizontal machining centre that offers quick acceleration, short tool changes and high power to improve productivity. Part of the Affordable Excellence collection of machines, the MB-4000H can be outfitted with either a 15K or a 20K rpm spindle. • Max Travels: 22.05" x 22.05" x 24.61"• Rotary Pallet Size: 15.75" x 15.75"• Spindle Type: CAT40 (HSK-A63 optional)

MB-5000HAs listed above for the MB-4000H and can run with an FMS pallet system.• Max Travels: 30" x 30" x 30"• Rotary Pallet Size: 19.69" x 19.69"• Spindle Type: CAT40 (HSK-A63 optional)


Coolant & Coolant MaintenanceSolutions

Minimix A more compact and portable version of the Jetmix. The Minimix is an ideal alternative to hand mixing pail users. It offers economic advantages, by guaranteeing the correct emulsion every time.

Description Order # Price $Jetmix w/drum mount BLA-9275DRUM $1,915.00

Minimix BLA-9259PC $785.00 55 gal drum extension

kit for Minimix BLA-9255PC $90.00

GOOD QUALITYBrix RefractometersMeasures Coolant ConcentrationFeatures• Comfortable eyepiece• Easy to read, bright scale• Adjustable focus for easy reading• Textured sleeve for easy gripping• Includes carrying case

Brix Range Accuracy Order # Price $0-10 ±0.1% OPT10 $180

Keep your coolant clean with a Tramp Oil Skimmer!

A Keller TKO Skimmer rapidly sweeps out tramp oil, cleans and aerates the entire sump.

Order #TK0-6B Tramp Oil Separator: Includes

Pre-filter, 1/2” Air Diaphram Pump, 6 Gallon Coalescing Tank & 555-07 lnlet Device.

Optional ShelfThe unit may be set on the floor adjacent to the sump

or hung on the machine tool using a magnet shelf (#CLO1)

shown above

Benefitsn Extended tool life, improved parts finishn Smoke and odor eliminationn Multiplied coolant life = much less machine downtime,

greatly reduced coolant purchase & disposal costsn Cost savings

Featuresn Patented permanent oil separating (coalescing) element, never needs changingn Rugged high flow 1/2” air-operated pump provides rapid tramp oil removal,

circulates and aerates entire sumpn Compact inlet device can access any pumpn No electricals — sets up in minutes — requires minimal operator attention

How the TKO Skimmer worksn Self-priming air operated pump pulls the tramp oil/coolant mixture from the surface

of the sump through the floating inlet device, then through a cartridge filter which removes any chips from the fluid

n The fluid mixture is then pumped through the patented Keller all-plastic separator element immersed in the separator tank

n The cleaned coolant continuously returns to the sumpn The oil layer collects on the top of the separator tank and occasionally drains into a

waste oil container by simply opening the oil drain valve

Specifications

Footprint: 14” x 14” Height: 24” Weight: 39 lbs Compressed air requirements: 0.5 SCFM @ 20 to 125 psi

Blasocut BC 935 SWBlasocut BC 935 SW is a water-miscible, mineral and ester oil based, boron and chlorine free cutting fluid with minimal residue. This product is characterized by strong pH and long term stability. It is designed for the use in soft water.

Range of applicationUniversal machining and grinding fluid for steel, alloyed steels, cast iron, aluminum, titanium and other tough to machine alloys. Ideal for both individually filled machines as well as centralized systems.

PropertiesGood cutting performance Ü

Good rinsing behavior Ü

Mild formulation without Ü bactericide

BenefitsUniversally applicable, long tool life, increased productivityClean machines and parts, economical consumption (low top off rates)Good human and skin compatibility

B-Cool 755B-Cool 755 is a water miscible, mineral oil based, chlorine free cutting fluid. The characteristics of this product are low foaming behavior in hard and soft water with good stability, good protection from corrosion and low consumption.

Range of applicationB-Cool 755 is qualified for machining of hard and soft aluminumalloys, titanium, nickel-based alloys, steel alloys including heat-resistant steel and stainless steel.

PropertiesVery high stability of the ÜemulsionVery low foaming behavior Ü in hard conditions and soft waterOutstanding rinsing Ü behavior

BenefitsEconomical through long sump life low disposal costIdeal for high cutting speeds and high pressure

Very low consumption

Blaser coolant delivers outstanding cutting performanceBlaser coolants are more concentrated so you use less product, therefore you have a much lower consumption rate with better performance, longer tool life and shorter cycle times.

Jetmix Save time. Save money.Inexpensive Coolant Management• Improperly mixed coolant leads to

decreased tool life and premature sump failure

• Less usage: No split out due to poorly mixed coolant

• Aides in controlling concentration in machinesEasy to Use• No orifices to change• Excellent operator acceptance• Easy to adjust - No more guesswork!One-Time Investment• The Jetmix provides years of maintenance-free service• Investment payback in as little as one monthSuperior to Competitive Mixers• Cavitation creates smaller oil droplets• High output, wide concentration range• Prevents water from entering coolant concentrate• No drips, no mess!

BETTER QUALITYRefractometer The refractometer is an indispensable aid for simple and quick measurement of the concentration of water-miscible cutting fluids. The correct concentration of cutting fluids is a critical requirement for optimum performance.This easily operated tester is therefore a valuable aid in preventing possible problems within the production process.One or two drops of the fluid to be tested are placed on the surface of the prism and covered with the plastic cover. The concentration can be read immediately with the built-in eyepiece. The reading is made by means of the border between light and dark zones on the scale. The scale range is Brix 0.0 to 33.0%.

Specifications B-Cool 755Foam control betterSuitable for hard water >180 ppm bestHard metals / tough alloys bestSoft aluminum bestSteel / irons conditionalAluminum / non-ferrous yesGrinding < 200 grit wheel conditionalGrinding > 200 grit wheel conditionalConcentration range 7-15Refractometer factor 1Refractometer range 7-15Order # (18.8 L) BLA-11755010019Price $ $325Order # (208 L) BLA-11755010208Price $ $3,225

FOB THOMAS SKINNER WAREHOUSE

Specifications BC 935 SWFoam control betterSuitable for hard water >180 ppm noHard metals / tough alloys betterSoft aluminum betterSteel / irons yesAluminum / non-ferrous yesGrinding < 200 grit wheel yesGrinding > 200 grit wheel yesConcentration range 3-15Refractometer factor 1.5Refractometer range 3-15BC935 Order # (18.8 L) 1935020019Price $ $285BC935 SW Order # (208 L) BLA-01935650208Price $ $2,650BC935 Order # (208 L) BLA-11755010019Price $ $2,485

FOB THOMAS SKINNER WAREHOUSE

Order # Price $BLA-9288 $265


Incredibly AccurateHYDMECH recognizes the importance of accuracy in each and every cut you make.

H-14A Automatic Horizontal Band SawDesigned for high production cutting with a carbide tipped blade, the H-14A is unlike anything on the market. With an enclosed design for superior safety, this machine uses 66% less energy than competing models due to on-demand hydraulics which only operate when needed.

Its 25 mm remnant length option, reduces material waste and SAVES YOU MONEY!• Heavy duty cast iron saw head• 14" x 14" capacity• Automatic multi-indexing up to 24” in a single stroke• 1-1/4" x 15'2" blade• Split front vise allows for 4.7” remnant• 8.8 HP VFD. True direct drive, no belts or pulleys• Programmable automatic PLC allows for 100 jobs and 20 in queue• 88" W x 63"L x 78"H

Using Carbide blades can save you up to 50%...• Increased blade speed • Increased feed rate• Faster cut times

Contact Thomas Skinner and arrange for your Guaranteed Trial Offer. Ask for the NEW Lenox catalogue filled with helpful information and personalized with Thomas Skinner part numbers!

Raise the bar on cutting performance, make the switch to Lenox today!

LC-185VS shown with

optional chip tray

See why is the #1 choice for

Milling Machines

LC-20 Series VSG & VHSHEAVY DUTY MILLING MACHINES

LC-185 & LC-1 1/2VERTICAL MILLING MACHINES

SPINDLENi-Cr alloy steel spindles are supported by three super precision preloaded angular contact ball bearings.

SPINDLENi-Cr alloy steel, supported by TWO precision angular contact and one ball bearing to ensure rigidity AND a third bearing at the top of the spindle.

LEADSCREW UNITUnique double nuts and backlash adjusting design allows for easy adjustment. Phosphorus Bronze nuts on the leadscrews.

MILLING HEADSUses dynamically balanced pulleys, precision bearings and selectively fitted quill and housing for smooth speed changing.

GEAR AND QUILLChromed-coated and mirror finished quill to fit each individual quill housing offers extreme high spindle accuracy/stability.

MAIN COMPONENTSThe major components are made from certified Meehanite GC casting. Column and base is a single piece casting.

EXCLUSIVE VARI-DISC DESIGNThe vari-disc is treated with HD polymer at the inside diameter using a patented process.

GEAR DRIVEN LONGITUDINAL FEEDThe table is driven by a steel gear box with 12 speed changes and rapid traverse for positioning of work piece.

ENLARGED TURRET CLAMPING SURFACEProvides 70% more contacting area than other similar models.

LC-20SVG & LC-20VHS comes with a Power Drawbar.

BOX WAY DESIGN FOR HEAVY DUTY WORKBoth the knee and saddle travel on box ways that ensure great stability even under heavy machining conditions.

CENTER MOUNTED CROSS FEED LEADSCREWPrevents exposure of the leadscrew to metal chips, cutting oil and dirt.

TURCITE-B COATED WAYSTable ways are treated with Turcite-B coatings that has excellent oil retention properties and high resistance to wear.

ADJUSTABLE BACKLASH NUTBacklashes between the nuts and the leadscrews are adjustable for proper tension. Phosphorus Bronze nuts on the leadscrews.

UNIQUE HEAD TILTING SYSTEMThe Ram adapter is designed with (8) T-bolt clamping system allowing the large vertical head to be tilted at all angels, front and back. The patented design greatly increases the stability and rigidity.

F.O.B. LOCAL THOMAS SKINNER WAREHOUSE

MODEL LC-20VSG Vertical LC-20VHS Ver./Hor.Table size 56 x 10”Longitudinal travel (manual max) 36.2”Cross travel 16.3”Vertical travel (knee)(manual max) 18”Order # LON-LC20VSG LON-LC20VHSRegular $ $25,495 $32,895 Special $ $22,995 $27,495**While stock lastsF.O.B. LOCAL THOMAS SKINNER WAREHOUSE

MODEL LC-1-1/2VSL LC-185VSTable size 50 x 9” 51 x 10”Longitudinal travel (manual max) 36” 31”Cross travel 12” 16.3”Vertical travel (knee)(manual max) 16” 15.3”Order # LON-LC112VSL LON-LC185VSRegular $ $14,200 $17,750Special $ $12,795 $13,495**While stock lasts

LC-20VSG & LC-20VHS come complete with a

Factory Installed 3-axis Mitutoyo DRO!

LC-185 & LC-1 1/2 come complete with a

Factory Installed 3-axis Mitutoyo DRO!

Pre-Price Increase Machines Available Now

Beat the Price $Increase!

Model Order # Capacity Blade Motor Operation Current Price After % of Stock (HP) Price Increase Increase Avail.

S - SERIES S20 HYD-S20 13” H x 18” W 1” 2 Manual $11,500 $14,500 26% 1 S20-P HYD-S20A 13” H x 18” W 1” 3 Semi-Automatic $16,300 $18,500 13.5% 1 S20-A HYD-S20P 13” H x 18” W 1” 3 Automatic $26,500 $32,900 24% 2 S23-A HYD-S23A 16” H x 20” W 1.25” 8.8 Automatic $35,500 $42,500 20% 1

H - SERIES H-14A HYD-H14A 14” H x 14” W 1.25” 8.8 Automatic $40,900 $49,500 21% 1All prices are F.O.B. Woodstock, ON. Installation extra.

‘CURRENT PRICE’ AVAILABLE ON IN STOCK MACHINES ONLY.

Receive TWO FREE Lenox Bi-Metal Band Saw Blades plus a (5) gallon container of Cutting Fluid with the purchase of a NEW Hydmech Band Saw! Call for complete details.

UNIQUE HEAD TILTING SYSTEMThe Ram adapter is designed with (6) T-bolt clamping system allowing the large vertical head to be tilted at all angels, front and back. The patented design greatly increases the stability and rigidity.

SAVE 24%

UPTO

SAVE 16%

UPTO

SAVE 26%

UPTO


VANCOUVER 13880 Vulcan Way Richmond, BC V6V 1K6

EDMONTON9407 - 51st AvenueEdmonton, AB T6E 4W8

CALGARY4540 - 50th Avenue SECalgary, AB T2B 3R4

WINNIPEG820-D Berry StreetWinnipeg, MB R3H 1H2

Central Reception 604-276-2131 or 1-800-567-2131

Customer Service / Inside Sales 604-207-3117 or 1-866-999-3117

Service & Parts 604-207-3100 or 1-866-779-2131

Visit our website www.thomasskinner.com

PRICES IN EFFECT MAY 1ST THROUGH JULY 15TH, 2016 UNLESS OTHERWISE STATED. All CNC machines are F.O.B. as shown while quantities last. We have tried to be as accurate as possible, however, there may be some errors in text, specifications or price. Please confirm text, specifications and price with your Customer Service Representative.

All items are new unless otherwise indicated. Pictures of items may not be exactly as shown. All products are priced in Canadian dollars unless otherwise stated. All products are F.O.B. Thomas Skinner Branch unless otherwise stated. Prices are in effect until quantities last or while manufacturers special discounts are in effect.

THOMAS SKINNER SHIPPING POLICY

FREE Shipping on all stock consumable product orders over $100 & under

50lbs. Items will be shipped ground. Overnight air is available from any Thomas Skinner branch

direct to you for just $5. (Must be over $100 & under 10lbs to qualify for Overnight Air, available in BC, AB, SK and MB only)

FREE SHIPPING

! FREE SHIPPIN

G! FREE SHIPPING! FREE

SH

IPPI

NG

! FRE

E

SHIPPING!

FREESHIPPING

6 Reasons why Customers should buy parts from Thomas Skinner: 1. Largest inventory of parts in Western Canada 2. Best Customer Service team in Western Canada

(highly trained team of Parts CSR’s, Service Coordination, Service Technicians and Technical Support)

3. OEM supplied parts covered by 90 day factory warranty 4. Competitive pricing and terms available5. Direct link to factory support and knowledge base for

quick resolution to issues6. We’ve been in business for 112 years and we stand

behind our customers

Call Our Service Department: 604-207-3100 or 1-866-779-2131

THOMAS SKINNER MACHINE SERVICE

Its standard Nine Cutting Axes (X1, Y1, Z1, X2, Y2, Z2, X3, Y3, Z3, C1, and C2) along with B0 Series Abile Programming Software can make easy work of your toughest applications.The benefit of a 9-axis machine is that it has three cutting tools, all cutting a single part simultaneously, and all three tools have independent feed rates. The result is shorter cycle times, which all part manufacturers continually strive for. The 20 mm capacity boasts a 10,000 rpm main spindle speed and a 12,000 rpm back spindle speed. It can house 28 tools and is equipped with a Fanuc 31i-B CNC.

Item BW209ZWorking barstock dia. Ø3 to Ø20 mm

Max. machining length

210 mm (Stationary guide bushing), 80 mm (Carrier type rotary guide bushing)

170 mm (Direct-drive rotary guide bushing), 45 mm (Guide bush less) *2

Max. main spindle drilling dia. Ø10Max. main spindle tapping dia. M10Max. back spindle chucking dia. Ø20Max. back spindle drilling dia. Ø8Max. back spindle tapping dia. M8Max. cross drilling dia. Ø6Max. cross tapping dia. M5 x 0.8Main spindle speed 200 to 10,000 min-1

Back spindle speed 200 to 12,000 min-1

Total tool storage capacity 28 tools

Tool size12 mm x 12 mm x 85 mm (T04, T05, T06, T16, T17),16 mm x 16 mm x 85

mm (T07, T18)

Main spindle motor 3 / 5 HPBack spindle motor 2 / 3 HPPrice $ $202,400* usd

*FOB USA Shipping Point

BW209ZState of the art Swiss Turning CentreSplit-slide CNC Precision LatheThe BW209Z offers simultaneous 3 path control on independent tool posts which allows for diverse part processing, including pinch turning and pinch milling.

See the BW209Z in

action!

Variable HelixSeries V4S & V4RAlCrN Coating• Helix geometry varies over

length of flutes• Variable flute design helps

with chip evacuation in lots and pockets

• PCT (Polish Carbide Treatment) enhances tool life by 20%

Variable HelixSeries V5 AlCrN Coating• Effective for

trochoidal milling• Minimizes burr

on part• Staggered flutes to

control harmonics• Variable flute design

helps with chip evacuation in slots and pockets

• Any size over 3/8” is available with weldon flat

Recommended for Titanium, Inconel, and SteelsThe combination of an extended flute length with a weldon flat may cause the flute washout to reach inside some end mill holders.

High Performance End Mills

V5 Variable Helix End Mill - AlCrN Coating

d1 l1 l2 rOrder # Special $Diameter Overall Length Flute Length Corner Radius

1/4” 2” 3/8” - 50007 $23.651/4” 2” 3/8” .015” 50008 $27.401/4” 2-1/2” 3/4” .015” 50012 $30.353/8” 2” 1/2” - 50029 $38.603/8” 2” 1/2” .015” 50031 $44.203/8” 2” 1/2” .020” 50032 $44.203/8” 2-1/2” 1” - 50034 $45.103/8” 2-1/2” 1” .015” 50035 $48.003/8” 2-1/2” 1” .020” 50036 $48.003/8” 2-1/2” 1” .030” 50037 $48.001/2” 3” 1” - 50056 $67.501/2” 3” 1” .010” 50108 $82.001/2” 3” 1” .020” 50057 $82.001/2” 4” 1-5/8” - 50436 $91.301/2” 4” 1-5/8” .010” 50438 $96.901/2” 4” 1-5/8” .020” 50440 $96.901/2” 4” 1-5/8” .030” 50442 $96.905/8” 3-1/2” 1-1/4” - 50069 $124.505/8” 3-1/2” 1-1/4” .030” 50071 $130.503/4” 4” 1-1/2” - 50082 $177.503/4” 4” 1-1/2” .030” 50083 $187.203/4” 4” 1-1/2” .060” 50084 $187.20

OTHER SIZES ARE AVAILABLE

V4S Variable Helix End Mill - Square End AlCrN Coating

d1 l1 l2

Order # Special $Diameter Overall Length Flute Length

1/4” 2” 3/8” 50540 $22.451/4” 2-1/2” 3/4” 50238 $25.30

5/16” 2-1/2” 13/16” 50239 $36.103/8” 2” 1/2” 50542 $36.553/8” 2-1/2” 1” GAR-50241 $42.601/2” 3” 2-1/2” 50543 $59.801/2” 3” 1” GAR-50452 $63.751/2” 4” 1-5/8” 50578 $86.255/8” 3” 3/4” 50545 $112.005/8” 3-1/2” 1-1/4” 50246 $117.603/4” 4” 1” 50549 $167.853/4” 4” 1-1/2” 50248 $167.85


V4R Variable Helix End Mill - Corner Radius AlCrN Coating

d1 l1 l2 rOrder # Special $Diameter Overall Length Flute Length Corner Radius

1/4” 2-1/2” 3/4” .010” 50207 $28.701/4” 2-1/2” 3/4” .015” GAR-50208 $28.701/4” 2-1/2” 3/4” .030” 50209 $28.705/16” 2-1/2” 13/16” .020” 50210 $28.703/8” 2” 1/2” .020” 50494 $41.753/8” 2-1/2” 1” .010” GAR-50216 $45.403/8” 2-1/2” 1” .020” GAR-50217 $45.403/8” 2-1/2” 1” .030” 50218 $45.40

50496 1/2” 2-1/2” 5/8” GAR-50496 $70.251/2” 3” 1” .010” GAR-50379 $78.401/2” 3” 1” .020” GAR-50381 $78.401/2” 3” 1” .030” 50383 $78.401/2” 4” 1-5/8” .010” 50580 $92.701/2” 4” 1-5/8” .020” 50582 $92.701/2” 4” 1-5/8” .030” 50584 $92.701/2” 4” 1-5/8” .040” 50586 $92.701/2” 6” 5/8” .020” 50594 $144.20


SAVE 30%

• Minimizes burr on part

• Any size over 3/8” is available with Weldon flat

Recommended for Titanium, Inconel, and SteelsThe combination of an extended flute length with a weldon flat may cause the flute washout to reach inside some end mill holders.

SAVE 30%

Digimatic Height Gauge - thomasskinner.com fileThe first double-sided, multi-edge face milling...

Documents

Transcript of Digimatic Height Gauge - thomasskinner.com fileThe first double-sided, multi-edge face milling...