DIFFERENTIAL CONNECTOR - Fujitsu · 2014. 12. 18. · • Skew within Differential Pair: 14.4ps (2...

1Dimensions are in millimeters (inches) http://us.fujitsu.com/connectorsSpecifications subject to change

DIFFERENTIAL CONNECTORFCN-260(D) Series microGiGaCN™

n SPECIFICATIONS n MATERIALS

nFEATuRES • I/O Connector designed for high speed differential

signal applications. • Matched Impedance (100 ohms ±10%) • Low insertion loss • Low cross talk • Adopted by InfiniBand as 10G Ethernet, SAS, & sATA for 4x/12x Interface

metI slairetaM

rotalusnI )0-V49LU(niseRPCL

rotcudnoC yollAreppoC

gnitalP

)SOGAP(gnitalPdloG:tcatnoCiN-dPrevotaocdloG:lanimreT

gnitalpcniZ:revoC

Product Specification are subject to change, please check our website (www.fcai.fujitsu.com) for the latest specifications.

metI snoitacificepS

erutarepmetgnitarepOegnar C˚501+otC˚55-

gnitartnerruC )langis(A5.0CA )dnuorg(A1CA

gnitaregatloV V03CA

ecnatsisertcatnoC)ecnatsiserrotcudnochtiw(

)langis(.xamsmhom08dnuorg(.xamsmhom53

ecnatsisernoitalusnI muminimsmhoM0001

gnidnatshtiwcirtceleiDegatlov etunim1rofV005CA

ytilibaruD selcyc052

ecrofnoitresnI )riap8(.xamN03 )riap42(.xamN06

ecroflwardhtiW )riap8(.nimN7 )riap42(.nimN5.01

RoHS Compliant

microGiGaCN™ FCN- 260 (D) Series

Dimensions are in millimeters (inches) http://us.fujitsu.com/connectorsSpecifications subject to change 2

The MicroGigaCN offers a cost-effective I/O solution for high-speed applications in data and telecommunications convergence (voice, data, video and storage). It offers four or twelve link widths, offering a scalable performance range of 500Mbps to 6Gbps per link to meet the needs of entry-level and high-end enterprise systems. Forward crosstalk is less than 4% at 100 pico second pulse-rise time (four-pair switching). Fujitsu Components designed the MicroGiGaCN to specifically address the requirements for a high speed differential signal I/O connector.

The MicroGiGaCN offers a unique solution to LVDS, InfiniBand, 10G Ethernet, 3G/6G SAS & SATA, and other high speed I/O applications. InfiniBand, IEEE802.3AR, SAS, & SATA have selected Fujitsu’s connector for the 4x and 12x I/O connector interface. The performance requirements of the connector system were tested with cable to simulate the actual requirements of an OEM System manufacturer. Our test data includes the parasitic effects of the PCB, along with measurements of a completed I/O cable assembly.

• Matched Impedance: 93.6 to 109.9 ohms @ 100 ps Trise • Low Cross Talk: NEXT 3.8% @ 100pc Trise (4 pairs switching, 2 connectors and 10 meters of cable)

• Low Insertion Loss: 2.3dB @ 2.5Gb/s (1.25GHz, 1 Meter Cable Assembly) • Skew within Differential Pair: 14.4ps (2 connectors and 2 meter of cable) • Skew pair to pair: 21.2ps (2 connectors and 2 meter of cable)

Product Specification are subject to change, please check our website (http://us.fujitsu.com/connectors) for the latest specifications.

Electrical Performance in out testing:



Fujitsu Components has designed the mechanical features of the connector to provide space saving footprint that will allow for 3 4x I/O connectors to mount onto a PCI form, or 2 12x. As RFI/EMI are critical elements in high performance cable assemblies, Fujitsu Components provides the surface mount sockets with an EMI Ground Spring on the face of the connector, to insure that the metal surface of the connector makes sufficient contact with the metal face of the card bracket. The latching mechanism of the backshell offers a lanyard system for ease of un-mating the I/O plug connector/cable assembly from the SMT I/O socket. The die cast backshell offers excellent RFI/EMI characteristics. The backshell uses a ferrule and

Connector Internal Struture

unique ground spring system to provide 360 degree contact of the cable shield to the backshell, which, combined with the solid interconnect of the socket to faceplate, offers low AC coupling termination. The current version of the I/O plug comes with an attached paddlecard for wire termination. Fujitsu offers the paddlecard in either an equalized or un-equalized version (see factory for details of the equalized version). Standard product offering will be un-equalized. As there are multiple applications for the paddlecard, with industry and customer specific wire termination, Fujitsu Components offers options to customers of providing the I/O plug connector with custom paddlecards (consult factory).

Basic Concept for Differential Transfer

+

-

+

-

1.27 mm

+

-

0.75 mm1.5 mm

Ground/Power contactDifferential pair contact

Virtual ground plane

Sectional View (Connection area)Basic Concept for Differential Transfer

Outer shield

Patent pending

Product Specification are subject to change, please check our website (http://us.fujitsu.com/connectors) for the latest specifications.



n DIMENSIONSCABLE I/O jACk SCREw LOCk TyPE

J1J2

J3Y

XS(mx2)G(n)

9.6 (0.378)6.75 (0.266)

GasketS(2)

G(1)

S(1)Detail X

2-M2.5

Shield coverHexagon screw

G(1)S(1)

S(2)

G(n)S(mx2)S(mx2-1)

Ground contact

Signal contact1.5 (0.59)

1.5 (0.59)

YX

S(mx2-1)

12 (

0.47

2)

1.2 (0.47)

5.8 (0.228) max.

7.39 +0.30 (0.291 +0.012 )0

Solder post

10.0

75(0

.397

)

1.3(0.051)

(Center of dimension value 1.3mm (0.51in)

6.1 (0.240)

9.2 (0.362)

¿4

7.6

+0.1

0-0

.15

(0.2

99 +

0.00

4 )

-0.0

06

Detail Scale

X5/1

S(1)

S(2)G(1)

Detail A

J4 6 (0.236)

0.5 (0.019)0.15 (0.006)

0.15 (0.006)

Detail A

G(n)

2-ø2.2±0.05 (P.T.H.)(2-ø0.087±0.002)

Edge of P.C.B.

S(mx2)S(mx2-1)

Recommended P.C.B. dimensions

J5J4 ±0.05 (0.002)

8.9 (0.350)6(0.236)

Detail B

9 (0.3

54)

4.6

0 -0.0

5(0

.181

0

)

-0.0

025.

9±0.

05(0

.232

±0.0

02)

6.7

0 -0.0

5(0

.264

0

)

-0.0

02

Detail B

[(p-1)x0.5±0.05] (0.019±0.002) 2.

6+0.

050

2.6+

0.05

0

(0.1

02+0

.002

)0

(0.1

02+0

.002

)0

0.25+0.050(0.009+0.002)0

0.25+0.050(0.009+0.002)0 G(1)

S(2)S(1)

n DIMENSIONS

CABLE I/O jACk SCREw LOCk TyPEFCN-268D0**-G/ 0 *NO MOLD PIN

Unit: mm (in.)

Unit: mm (in.)

Part Number m n p J1 J2 J3 J4 J5

FCN-268D008-G/0* 1-8 1-9 1-2529.8

(1.173)20.15

(0.793)17.25

(0.679)18

(0.709)20.9

(0.823)

FCN-268D024-G/0* 1-24 1-25 1-7353.8

(2.118)44.15

(1.738)41.25

(1.624)42

(1.654)44.9

(1.768)



CABLE I/O jACk SCREw LOCk TyPEFCN-268D0**-G/ 1 * wITH ALIGNMENT PINFCN-268D0**-G/ 2 * wITH CRuSH PINn DIMENSIONS

Part Number m n p J6 J7 J8

FCN-268D008-G/1*FCN-268D008-G/2* 1-8 1-9 1-25

14.5(0.571)

19.25(0.758)

22.15(0.872)

FCN-268D024-G/1*FCN-268D024-G/2* 1-24 1-25 1-73

38.1(1.516)

43.25(1.703)

46.15(1.817)

Part Number m n p J9 J10 J11

FCN-268D008-G/3* 1-8 1-9 1-25 14.5 (0.571) 19.25 (0.758) 22.15 (0.872)

FCN-268D024-G/3* 1-24 1-25 1-73 38.1 (1.516) 43.25 (1.703) 46.15 (1.817)

Detail H

J10J9

Detail G

Detail G

4.75 (0.187)

0.15(0.006)

0.15(0.006)

0.5 (0.019)

1.25(0.049)

ø1.8(0.070)(Alignment pin)

Detail H

1.5 (0.059)

1.8

(0.7

0)

G(1)S(2)S(1)

0.305±0.025 (0.012±0.001)0.305±0.025

(0.012±0.001)

[(p-1)x0.5+1.25±0.05] (0.019+0.049±0.002)

2.6+

0.05

0

(0.1

02+0

.002

)0 (0

.102

+0.0

02)

0

2-ø1.82+0.05 (0.072+0.002)

Detail J

2.6+

0.05

0

00

Detail J

9 (0.3

54)

3.9

±0.0

5(0

.154

)4.

6 0 -0.0

5(0.

181

0

)

-0.0

02

6.7

0 -0.0

5(0

.264

0

)

-0.0

02

7.65 (0.301)4.75±0.05 (0.187±0.002)

J10±0.05 (0.002)J9±0.05 (0.002)

G(n)ø

2-ø

2.2±

0.05

(P.T

.H.)

(2-ø

0.08

7)

Edge of P.C.B.

S(mx2)S(mx2-1)

J11±0.05 (0.002)

5.9

0 -0.0

5(0.

232

0

)

-0.0

02

n DIMENSIONS

CABLE I/O jACk SCREwLOCk TyPEFCN-268D0**-G/ * * SOLDER POST LENGTH

Detail DDetail C

Detail C

J6

J7 4.75 (0.187)

0.15(0.006) 0.15

(0.006)

0.5(0.019)

1.25(0.049) 4.1(0.161) 1.

075

(0.0

42)

Detail D

2-ø1.8(0.070)

Crush pin4-0.15 (0.006)

Detail D2-ø1.8(0.070)

1.88

(0.0

74)

G(1)S(2)S(1)

0.305±0.025 (0.012±0.001)0.305±0.025

(0.012±0.001)

[(p-1)x0.5+1.25±0.05] (0.019+0.049±0.002)

(0.1

02+0

.002

)0

2.6+

0.05

0

ø1.82+0.050 (0.072+0.002)0

(0.1

02+0

.002

)0

2.6+

0.05

0

Detail E

Detail F

¿1.8

2+0.

050

(0.0

72+0

.002

)0

2.6±0.05 (T.H.)(0.102±0.002)

Detail E

9 (0.3

54)

3.9

±0.0

5(0

.154

)4.

6 0 -0.0

5(0

.181

0

)

-0.0

02

6.7

0 -0.0

5

(0.2

64 0

)-0

.002

6.7

0 -0.0

5

(0.2

64 0

)-0

.002

7.65 (0.301)4.75±0.05 (0.187±0.002)

J8J7±0.05 (0.002)

J6±0.05 (0.002)

Detail F

G(n)

2-ø2.2±0.05 (P.T.H.)(2-ø0.087)

Edge of P.C.B.

S(mx2)S(mx2-1)

5.9

0 -0.0

5(0

.232

0

)

-0.0

02

Unit: mm (in.)

CABLE I/O jACk SCREw LOCk TyPEFCN-268D0**-G/ 3 * wITH DIAMOND PINn DIMENSIONS

Unit: mm (in.)

Unit: mm (in.)

Part Number P.C.B. thickness J12

FCN-268D0**-G/*0 1.6 (0.063)2.352

(0.092)

FCN-268D0**-G/*1 2.4(0.0940)3.125

(0.123)

fcn-268d0**-G/*3 4.0(0.157)4.725

(0.186)



(1)

Panel

4.97

5(0

.196

)

1.85 (0.073)[3.9](0.154)

[5.9](0.232)

P.C.B.

Recommended panel cutout position

J13 ±0.1(0.004)J14 ±0.1(0.004)J15 ±0.1(0.004)

10û 10û

Panel cutoutRecommended thickness of panel: 1±0.1mm (0.039±0.004)

2- 3.4 (0.134) 10.3

±0.1

(0.4

06±0

.004

)2.5

maxR0

.3 ma

x

n DIMENSIONS

CABLE I/O jACk SCREw LOCk TyPEFCN-268D0**-G/ * * PANEL CuTOuT (REFERENCE)

Part Number m n J13 J14 J15

FCN-268D008-G/** 1-8 1-927

(1.063)24

(0.945)19.7

(0.776)

FCN-268D024-G/** 1-24 1-2551

(2.008)48

(1.890)43.7

(1.720)

Unit: mm (in.)



FCN-264D - vERTICAL MOuNT SOCkETS, LATCH STyLE

n PART NuMBERS

nDIMENSIONS

Part Number Pair m n p A B C D E

FCN-264D008-G/**FCN-264D008-G/***

8 1-8 1-9 1-2517.675(0.696)

14.5(0.571)

17.7(0.697)

22.7(0.894)

19.7(0.776)

FCN-264D024-G/**FCN-264D024-G/***

24 1-24 1-24 1-7341.675(1.641)

38.5(1.516)

41.7(1.642)

46.7(1.839)

43.7(1.720)

Part Number F: Panel Thickness G: Lock Plate Thickness

FCN-264D008-G/**FCN-264D024-G/**

1.00.5: FCN-260A622 FCN-260A626

FCN-264D008-G/**1FCN-264D024-G/**1

1.20.3: FCN-260A632 FCN-260A636

Part Number P.W.B. Thickness H

FCN-264D0**-G/*DFCN-264D0**-G/*D1

1.6 2.325

FCN-264D0**-G/*FFCN-264D0**-G/*F1

2.4 3.125

FCN-264D0**-G/*KFCN-264D0**-G/*K1

4.0 4.725

S [2m]G[n]

S[2m-1]

A

12 (0.4

72)

3(0.118)

7.175 (0.282)S[2]G[1]

S[1]1.5 (0.059) TYPsignal contact

1.588 (0.063) TYPground contact

1 (0.039)0.025 (0.001)

X

4.7(0.185)Detail V

ZZ

3.9

(0.1

54)

10.3

(0.4

06)

13 (0

.512

)

CB

0.5 (0.020) TYPTerminal pitch

2-Ø1.8 (2-Ø0.070)

1.25(0.049)

3.2(0.126)

6.7

(0.2

64)

6.45

(0.2

54)

0.3

(0.0

12)

0.3 (0.012)

Detail V(contact lead))

1 (0

.039

)

Mold pin(Mold pin type)

FCN-264D0 * *-G/ * *, -G/ * * *

FCN-264D0 * *-G/ * *, -G/ * * *(Recommended P.W.B. thickness)

I/O panel

H

(F)

G

(Alignment pin type)FCN-264D0 * *-G/ 1 *, -G/ 1 * *

(Alignment pin type)FCN-264D0 * *-G/ 2 *, -G/ 2 * *

2-Ø1.8 (0.071)Ø1.8 (0.071)

4-R

0.15

(0.0

06)

2-1.

88 (0

.074

)

Lock Plate Thickness:

Solder Post Length:

Unit: mm (in.)



n DIMENSIONS4X / 12X RIGHT ANGLE MOuNT SOCkETS wITH LATCHES

n DIMENSIONS

G (n) (G25)2-¿2.2±0.05 (0.087±0.002) (P.T.H.)

S(mx2) (S48)S(mx2-1) (S47) Recommended P.W.B. dimensions

C±0.05 (0.002)D±0.05 (0.002)

3.2 ±0.05(0.126±0.002)Detail D

3.9±

0.00

5(0

.153

±0.0

02)

Edge of P.W.B.

2.6 ±0.05(0.102±0.002) (T.H.) Ø1.82 +0.050

(0.072 +0.002 )0

(T.H.)

5.9±

0.05

(0.2

32±0

.002

)6.

65 0 -0

.05

(0.2

62 0

)-0

.002

1.82

+0.

05

(0.0

72 +

0.00

2 )

(T.H

.)

00

4.6

0 -0.0

5(0

.181

0

)

-0.0

02

1.5(0.059) x (n-1) + 1.25±0.05 (0.049±0.002)Ground pitch

1.5(0.059) x (m-1) + 2±0.05 (0.079±0.002)Signal pitch

0.5±0.05 (0.02±0.002)

0.305±0.025(0.012±0.001)

0.305±0.025(0.012±0.001)

2.6

+0.0

5

(0.1

02 +

0.00

2 )

00

2.6

+0.0

5

(0.1

02 +

0.00

2 )

00

Detail D

B

BD

A

G(n) (G25)

12 (0.4

72)

S(mx2-1) (S47)

S(mx2) (S48)3 (0.118)

7.175(0.282)

S2G1

S1BD1.5(0.059) x (m-1) Signal contact

1.5(0.059) x (n-1) -0.75(0.030Ground contact

Detail E

Detail C

BD

6.4±

0.1

(0

.252

±0.0

04)

6.15

(0.2

42)

0.3

(0.0

12)

G(n) (G25)

S(mx2-1) (S47)S(mx2) (S48)

Detail B

3.2(0.126)

10.3

±0.1

(0.4

06±0

.004

)

7.2±

0.1

(0.2

83±0

.004

)

EF

Panel cutout

6.45 (0.254)

4.1 (0.161)6.1 (0.240)9.2 (0.362)

C 0.3 (0.182)

1.07

5(0.

042)

X

Detail A

Z Z

Detail E

1.5(0.059) x (n-1) + 1.25±0 (0.049)Ground terminal pitch

1.5(0.059) x (m-1) + 2 (0.079)Signal terminal pitch Detail C

S2

S1

G10.5 (0.020)

R0.3

max

.

0.15 (0.006)

1.88

(0.0

74)

Detail B

Spring

Section Z-Z(board pin)

1.3(0.051)

1.2

(0.0

47)

Section Y-Y

Insulator

Ground contact

Unless otherwise specified, dimensions are in millimeters (inches) and tolerances are ±0.5mm (±0.020 inches).ÊCopolarity shall be less than 0.1mm (0.004 in.)This drawing shows FCN-268D024-G/2F

Crush Pin Option

¿1.80-0.05¿0.0710-0.002

Unit: mm (in.)

Unit: mm (in.)



n PART NuMBERS

Fujitsu has developed 3 different versions of the board mount connector to meet various mounting processes: FCN-268D0xx-G/1* Added alignment post for robotic placement (recommended) FCN-268D0xx-G/2* Added crush pin feature - for manual placement (recommended) FCN-268D0xx-G/0* Original Design for optical robotic placement to the PCB

Each connector is shipped with 1 piece of FCN-260A622 retention clip. To order connector and retention clip separately, please contact factory for part number.

FCN-268T-T514/H

For Assembly instructions, please see the Lock Plate Hand Tool Instruction Manual

Retention Clip

riaP.B.W.P

kcihtssen

X m n A B C D E F hsurC niP

D1/G-800D862-NCF 8 6.1 )360.0(4.2

)490.0( 8-1 9-158.42)879.0(

576.71)696.0(

7.71)796.0(

5.41)175.0(

1.0±7.22)400.±498.(

1.0±7.91)400.±677.( on

D2/G-800D862-NCF 8 6.1 )360.0(4.2

)490.0( 8-1 9-158.42)879.0(

576.71)696.0(

7.71)796.0(

5.41)175.0(

1.0±7.22)400.±498.(

1.0±7.91)400.±677.( sey

F1/G-800D862-NCF 8 4.2 )490.0(2.3

)621.0( 8-1 9-158.42)879.0(

576.71)696.0(

7.71)796.0(

5.41)175.0(

1.0±7.22)400.±498.(

1.0±7.91)400.±677.( on

F2/G-800D862-NCF 8 4.2 )490.0(2.3

)621.0( 8-1 9-158.42)879.0(

576.71)696.0(

7.71)796.0(

5.41)175.0(

1.0±7.22)400.±498.(

1.0±7.91)400.±677.( sey

K1/G-800D862-NCF 8 0.4 )751.0(8.4

)981.0( 8-1 9-158.42)879.0(

576.71)696.0(

7.71)796.0(

5.41)175.0(

1.0±7.22)400.±498.(

1.0±7.91)400.±677.( on

K2/G-800D862-NCF 8 0.4 )751.0(8.4

)981.0( 8-1 9-158.42)879.0(

576.71)696.0(

7.71)796.0(

5.41)175.0(

1.0±7.22)400.±498.(

1.0±7.91)400.±677.( sey

D1/G-420D862-NCF 42 6.1 )360.0(4.2

)490.0( 42-1 52-158.84)329.1(

576.14)146.1(

7.14)246.1(

5.83)615.1(

1.0±7.64)400.±938.1(

1.0±7.34)400.±027.1( on

D2/G-420D862-NCF 42 6.1 )360.0(4.2

)490.0( 42-1 52-158.84)329.1(

576.14)146.1(

7.14)246.1(

5.83)615.1(

1.0±7.64)400.±938.1(

1.0±7.34)400.±027.1( sey

F1/G-420D862-NCF 42 4.2 )490.0(2.3

)621.0( 42-1 52-158.84)329.1(

576.14)146.1(

7.14)246.1(

5.83)615.1(

1.0±7.64)400.±938.1(

1.0±7.34)400.±027.1( on

F2/G-420D862-NCF 42 4.2 )490.0(2.3

)621.0( 42-1 52-158.84)329.1(

576.14)146.1(

7.14)246.1(

5.83)615.1(

1.0±7.64)400.±938.1(

1.0±7.34)400.±027.1( sey

K1/G-420D862-NCF 42 0.4 )751.0(8.4

)981.0( 42-1 52-158.84)329.1(

576.14)146.1(

7.14)246.1(

5.83)615.1(

1.0±7.64)400.±938.1(

1.0±7.34)400.±027.1( on

K2/G-420D862-NCF 42 0.4 )751.0(8.4

)981.0( 42-1 52-158.84)329.1(

576.14)146.1(

7.14)246.1(

5.83)615.1(

1.0±7.64)400.±938.1(

1.0±7.34)400.±027.1( sey

4X / 12X RIGHT ANGLE MOuNT SOCkETS wITH LATCHES wITH ALIGNMENT POST OR CRuSH PIN OPTION

Retention Clip Hand Tool

epyT .oNtraP ssenkcihT lenapO/Ifo A B C D E

X4226A062-NCF )930.0(0.1 44.32

)329.0(54.22)488.0(

05.02)708.0(

54.02)508.0(

)20.0(5.0

236A062-NCF )740.0(2.1 )21.0(3.0

X21626A062-NCF )930.0(0.1 54.74

)868.1(54.64)928.1(

05.44)257.1(

54.44)57.1(

)20.0(5.0

636A062-NCF )740.0(2.1 )21.0(3.0

ABC

D

5.4 (0.213)

6.4 (0.252)

5.8 (0.228)

0.5(0.020)

6.3 (0.24

8)E±0.05(0.002

n PART NuMBERS



n PART NuMBERS

nDIMENSIONS

4X / 12X RIGHT ANGLE MOuNT CONNECTOR SOCkET wITH LATCHES wITH MOuNTING EARS

Unit: mm (in.)

S2G1

S(mx2) (S16)

S(mx2-1) (S15)G(n) (G9)

12 (0

.482

)7.

2 (0

.283

)

S11.5 (0.059) TYP

1.5 (0.059) TYPSignal contact

2M 2.5

With positioning pin (diamond type)

Ground contact

0.3

(0.0

12)

6.4

±0.1

(0.2

52±0

.004

)6.

15(0

.242

) Detail B

Detail CF

E

Detail AG(n) (9)

S(2xm) (S16)

S(m2-1) (S15)

¯ 1.8 0-0.05(¯ 0.071 0-0.002)

3.2 (0.126)

CDBA]

12.525 (0.493)9.675 (0.381)6.92 (0.272)

3 (0.118)

Balancer

1.5 (0.059)

1.8

(0.0

71)

Detail A

Section Z-Z

0.3(0.012)

60û

Terminal pitch1.25 (0.049)

Detail C

S2S1

G10.15±0.01 0.006±0.0004)

0.15±0.01(0.006±0.0004)

0.5 (0.019) TYP

0.05A

0.05A

A

4.1(0.161)

6.1 (0.240)9.2 (0.362)

1.07

5 (0

.042

)X

(2.4

) [0.

094]

1.2±

0.00

5(0

.047

±0.0

02)

1.3±0.005(0.051±0.002)

Section Z-Z(board pin)

10.0

75 (0

.397

)0.

3±0.

05(0

.012

±0.0

02)

Section X-X

Differentialsignal contacts

Gasket

Section Y-Y

InsulatorGroundcontact

Partnumber PairP.W.B.thick-ness

X m n A B C D E F

FCN-268D008-G/3L-R 8 1.6(0.063)2.4

(0.094) 1-8 1-924.85

(0.978)17.675(0.696)

23.025(0.906)

20.175(0.794)

17.7(0.673)

14.5(0.571)

FCN-268D008-G/3M-R 8 2.4(0.094)3.2

(0.126) 1-8 1-924.85

(0.978)17.675(0.696)

23.025(0.906)

20.175(0.794)

17.7(0.673)

14.5(0.571)

FCN-268D008-G/3P-R 8 4.0(0.157)4.8

(0.189) 1-8 1-924.85

(0.978)17.675(0.696)

23.025(0.906)

20.175(0.794)

17.7(0.673)

14.5(0.571)

FCN-268D024-G/3L-R 24 1.6(0.063)2.4

(0.094) 1-24 1-2548.85

(1.923)41.675(1.641)

47.025(1.851)

44.175(1.739)

41.7(1.642)

38.5(1.516)

FCN-268D024-G/3M-R 24 2.4(0.094)3.2

(0.126) 1-24 1-2548.85

(1.923)41.675(1.641)

47.025(1.851)

44.175(1.739)

41.7(1.642)

38.5(1.516)

FCN-268D024-G/3P-R 24 4.0(0.157)4.8

(0.189) 1-24 1-2548.85

(1.923)41.675(1.641)

47.025(1.851)

44.175(1.739)

41.7(1.642)

38.5(1.516)



n PART NuMBERS

nRECOMMENDED FOOTPRINT DIMENSIONS

Unit: mm (in.)

Partnumber PairP.W.B.thick-ness

G H I J K L

FCN-268D008-G/3L-R 8 1.6(0.063)29.85

(1.175)22.7

(0.894)19.7

(0.776)25.025(0.895)

16.075(0.633)

16.65(0.656)

FCN-268D008-G/3M-R 8 2.4(0.094)29.85

(1.175)22.7

(0.894)19.7

(0.776)25.025(0.895)

16.075(0.633)

16.65(0.656)

FCN-268D008-G/3P-R 8 4.0(0.157)29.85

(1.175)22.7

(0.894)19.7

(0.776)25.025(0.895)

16.075(0.633)

16.65(0.656)

FCN-268D024-G/3L-R 24 1.6(0.063)53.85

(2.095)46.7

(1.839)43.7

(1.720)49.025(1.930)

38.075(1.499)

40.65(1.600)

FCN-268D024-G/3M-R 24 2.4(0.094)53.85

(2.095)46.7

(1.839)43.7

(1.720)49.025(1.930)

38.075(1.499)

40.65(1.600)

FCN-268D024-G/3P-R 24 4.0(0.157)53.85

(2.095)46.7

(1.839)43.7

(1.720)49.025(1.930)

38.075(1.499)

40.65(1.600)

G(n) (G9)2- ¯2.2±0.05(0.088±0.002)

0.12A(P.T.H.)

(0.2

640

)

Connector mounting area

10.525(0.414)

J

E

KF

3.2(0.126)1.575(0.062)

2- ¯1.82+0.05(0.072+0.002)

0

0

Detail D

2.6

(0.1

02)

3.9±

0.05

(0.1

53±0

.002

)5.

9±0.

05(0

.232

±0.0

02)

6.70

-0.0

5-0

.002

9 (0

.354

)

AEdge of P.W.B.

S(mx2) (S16)

S(mx2-1) (S15)

(0.1

810

)4.

60-0

.05

-0.0

02

Recommended P.W.B. dimension

0.1A(T.H.)

(0.0

.102

+0.0

02)

2.6+

+0.0

50 0

(0.0

.102

+0.0

02)

2.6+

+0.0

50 0

0.305±0.025(0.012±0.001)

0.305±0.025(0.012±0.001)

0.05A0.05A

0.5 TYP

1.25Detail D

A

G1S2S1

R 0.3m

ax.

Panel cutout t=1.0±0.1 (0.039±0.004)

G±0.1 (1.175)

H±0.1 (0.894)I±0.1 (0.776)

10.3

±0.

1 (0

.406

±0.0

04)

7.2

±0.1

(0.2

83±0

.004

)

2Ð¯ 3

Nozzle vacuum area (reference)

L

(5.5

5)[0

.219

]

4X / 12X RIGHT ANGLE MOuNT CONNECTOR SOCkET wITH LATCHES, wITH MOuNTING EARS



n PART NuMBERS

Unit: mm (in.)

Fujitsu has developed 3 different versions of the board mount connector to meet various mounting processes:FCN-268D0xx-G/1* Added alignment post for robotic placement (recommended) FCN-268D0xx-G/2* Added crush pin feature - for manual placement (recommended) FCN-268D0xx-G/0* Original Design for optical robotic placement to the PCB

nDIMENSIONS4X I/O CONNECTOR SOCkET

Differential signalcontacts

GasketInsulator

Ground contact

Lock plate

Detail A

Section X-X

Detail A

6.45(0.245) 6.1

(0.240)9.2(0.362)

Spring

Detail B

Detail B

0.5(0.393)

Detail C

2-¯2.2±0.05(2-¯0.087±0.002)

Detail D15.7±0.05(0.618±0.002)

5.2±0.05(0.205±0.002)

5.9±

0.05

(0.2

32±0

.002

)

6.70

(0

.264

0

)

0.00

2-0

.05

4.60

(0

.181

0

)

0.00

2-0

.05

Detail D Recommended P.W.B. DimensionEdge of P.W.B.

2.6+

0.05

(0

.102

+0.0

02 )

00

0.25+0.05 (0.010+0.002 )0

0

2.6+

0.05

(0

.102

+0.0

02 )

00

0.5±0.03(0.012±0.001)Section Y-Y

S2

G9

S16S15

S2

G1

S1

S2

G1

S1

G9

S16 S15

1.5 x (m-1) (Signal terminal pitch)

1.5 x (m-1)-0.75 (0.030)(Ground terminal pitch)

1.5 x (m-1) ±0.03 (0.001) (Signal pitch)

1.5 x (n-1)-0.75 ±0.003(0.030±0.001)(Ground pitch)

24.9 (0.980)17.7 (0.697) 7.2

(0.283)

12 (0

.472

)

S16

G9

S15

G1

S1XY

XY

1.5 x (m-1) (Signal contact)

1.5 x (n-1)-0.75 (0.030)(Ground contact)

Detail C

X

Differential signal contacts

GasketInsulator

Ground contact

Lock plate

Detail A

Section X-X7.2(0.283)

6.45(0.245) 6.1

(0.240)9.2(0.362)

Spring

Detail B

12 (0

.472

)Detail B

0.5(0.393)

Detail C

2-¯2.2±0.05(2-¯0.087±0.002)

39.7±0.05(1.563±0.002)

5.2±0.05(0.205±0.002)

5.9±

0.05

(0.2

32±0

.002

)6.

70

(0.2

640

)0.

002

-0.0

5

Detail DRecommended P.W.B. Dimension

Edge of P.W.B.

2.6+

0.05

(0

.102

+0.0

02 )

00

0.25+0.05 (0.010+0.002 )

2.6+

0.05

(0

.102

+0.0

02 )

00

0.5±0.03(0.012±0.001)

Section Y-Y

0.25+0.05 (0.010+0.002 )

Detail D

Detail A

41.7 (1.642)48.9 (1.925)

1.5 x (m-1) (Signal contact)1.5 x (n-1)-0.75 (0.030)(Ground contact)

1.5 x (m-1) (Signal terminal pitch)1.5 x (n-1)-0.75 (0.030)(Ground terminal pitch)

1.5 x (m-1) ±0.03(0.001) (Signal pitch)1.5 x (n-1)-0.75±0.03(0.030±0.001 )(Ground pitch)

S2G1

S1

Detail C

S2

G1S1S48

G25

S47

S48

G25

S47

S2

G1

S1

Gasket

S48

G25

S474.60

(0.1

810

)0.

002

-0.0

5

X

Unit: mm (in.)

rebmuNtraP X BCPdednemmoceR ssenkcihT

D0/G-800D862-NCF 4.2 6.1

F0/G-800D862-NCF 2.3 4.2

K0/G-800D862-NCF 8.4 0.4

rebmuNtraP X BCPdednemmoceR ssenkcihT

D0/G-420D862-NCF 4.2 6.1

F0/G-420D862-NCF 2.3 4.2

K0/G-420D862-NCF 8.4 0.4

n PART NuMBER

n DIMENSIONS12X I/O CONNECTOR SOCkET


4X / 12X SOCkETS wITH LATCHES



nREFERENCE4X / 12X PLuG CONNECTOR wITH INFINIBAND STyLE PCB

Unit: mm (in.)

S4S4 S(mx2) (S48)

BC

S2

S1G1 {1.5 x (m-1)}

Signal contact{1.5 x (n-1) -0.75} Ground contact

S (mx2) (S48)

G(n) (G25)

S (mx2-1) (S47)

3.2

(0.1

26)

S3S1 S (mx2-1) (S47)

(D)

Detail F

E

Slot of guard for miss insertion to cover

Solder pad

18.1

(0.7

13)

(9.5

5) [0

.376

]

(7.0

5) [0

.278

]

Chip resistorChip capacitorDetail F

Equalized



n PART NuMBERS4X / 12X PLuG CONNECTOR wITH INFINIBAND STyLE PCB (CABLE MOuNT)

Non-Equalized Plug kits

Equalized Plug kits 4x Plug kits - Equalized

Uses Leaded Solder RoHS 6/6 (lead free solder) Data SpeedsFCN-261R008-G/0 FCN-261R008-G/0L 4x up to 3.2Gbps

FCN-261R008-G/5 FCN-261R008-G/5L 4x up to 7Gbps

FCN-261R024-G/0 FCN-261R024-G/0L 12x up to 3.2GbpsFCN-261R024-G/5 FCN-261R024-G/5L 12x up to 7Gbps

Uses Leaded Solder RoHS 6/6 (lead free solder) Data Speeds Equalized Pair

FCN-261R008-G/3#08 FCN-261R008-G/3L#08 IB SDR 8 meter, 24AWG 1-4



FCN-261R008-G/3A#08 FCN-261R008-G/3AL#08 IB SDR 8 meter, 26AWG 1-4



FCN-261R008-G/6#08 FCN-261R008-G/6L#08 IB DDR 8 meter, 24AWG 1-4



FCN-261R008-G/6A#08 FCN-261R008-G/6AL#08 IB DDR 8 meter, 26AWG 1-4

FCN-261R008-G/6A#10 FCN-261R008-G/6AL#10 IB DDR 8 meter, 26AWG 1-4

12x Plug kits - Equalized

Uses Leaded Solder RoHS 6/6 (lead free solder) Data Speeds Equalized Pair

FCN-261R024-G/3#08 FCN-261R024-G/3L#08 12x IB SDR 8 meter, 24AWG 1-12



FCN-261R024-G/3A#08 FCN-261R024-G/3AL#08 12x IB SDR 8 meter, 26AWG 1-12



FCN-261R024-G/6#08 FCN-261R024-G/6L#08 12x IB DDR 8 meter, 24AWG 1-12



FCN-261R024-G/6A#08 FCN-261R024-G/6AL#08 12x IB DDR 8 meter, 26AWG 1-12

FCN-261R024-G/6A#10 FCN-261R024-G/6AL#10 12x IB DDR 8 meter, 26AWG 1-12IB SDR = InfiniBand Single Data rate - 2.5Gbps IB DDR = InfiniBand Double Data rate - 5Gbps Equalized circuits are optimized for cable length / wire AWG



n PART NuMBERS

nDIMENSIONS

4X / 12X PLuG CONNECTOR wITHOuT PCBRECOMMENDED PADDLE CARD OuTLINE

Unit: mm (in.)

3.45±0.1(0.136±0.004)

2±0.1(0.079±0.004)

J±0.1 (37.95) [1.494]H±0.1 (36.5) [1.437]

17±0

.1(0

.669

±0.0

04)

1±0.

1(0

.669

±0.0

39)

14.6

±0.1

(0.5

75±0

.039

)

G±0.1 (38.2) [1.504]1.7±0.1(0.067±0.039)

5.5±

0.1

Pad

cen

ter

(0.2

17±0

.004

)5.

25±0

.1 (0

.507

±0.0

04)

3±0.

1 (0

.120

±0.0

04)

G±0.5 (36) [1.417]1.5±0.05 (0.059±0.002)0.75±0.05 (0.030±0.002)0.45±0.05 (0.018±0.002)

1.6±

0.1

(0.0

63±0

.004

)

1.5±0.05 (0.059±0.002)0.45±0.05 (0.018±0.002)

E±0.5 (34.5) [1.358]

{1.5x(m-1)} [0.059]

{1.5x(n-1)-0.75} [0.059 (n-1)-0.030]

B (34.5) [1.358]C(36) [1.417)

3.2

(0.1

26)

rebmuNtraP riaP m n B C

A/G-800R162-NCF 8 8-1 9-1 )314.0(5.01 )274.0(0.21

A/G-420R162-NCF 21 42-1 52-1 )853.1(5.43 )714.1(0.63



4X / 12X BACkSHELL kITS, wITH LATCHESCABLE I/O PLuG COvER

22.9

(0.9

02)

71.9

(2.8

31)

49(1

.929

)8.

7(0.

342)

7.2 (0.283)

10.3

(0.4

06)

8.3(

0.32

7)

n PART NuMBERS

nDIMENSIONS

Unit: mm (in.)

Standard Backshell Kit Backshell Kit w/Pull TabFCN-260C008-A/L0 FCN-260C008-A/LAFCN-260C008-C/L0 FCN-260C008-C/LA

FCN-260C024-A/L0 FCN-260C024-A/LAFCN-260C024-C/L0 FCN-260C024-C/LA

4x pull tab = FCN-260A90512x pull tabl = FCN-260A902

Backshell key plug = FCN-260A802



n DIMENSIONS

REFERENCE4X CABLE MOuNT PLuG wITH BACkSHELL

Differential signal contacts

Insulator

Ground contact

Section X-X

24.9 (0.980)17.7 (0.697)7.2

(0.283)

Section Y-Y

10.3

(0.4

05)

8.3(

0.32

7)

14.4

(0.5

67)

49.1

(1.9

33)

72.1

(2.8

39)

23 (0

.906

)

18.1 (0.713)


1.5 x (n-1)-0.75 (0.030)(Ground contact)

Latch Color Blue

Color Blue

Unit: mm (in.)

Plug: FCN-261R008-G/0x

n PART NuMBER

Backshell Kit: FCN-260C008-A/L0

Drawing reflects plug and backshell together. Backshell Kit is backshell and hardware only. Plug is not included and must be ordered separately.

Notes: * FCN-261R0xx-G/x is shipped with protective pastic cover over mating face of connector to protect contacts during shipping and cable assembly process. * Equalization available - please consult factory.

Differential signal contactsInsulator

Ground contact

48.9 (1.925)41.7 (1.642)7.2

(0.283)

10.3

(0.4

05)

8.3(

0.32

7)

21 (0

.827

)

49.1

(1.9

33)

72.1

(2.8

39)

23 (0

.906

)

42.1 (1.657)

10.5

(0.4

13)


1.5 x (n-1)-0.75(0.030)(Ground contact)

S2

G1S1

S48

G25S47

Latch

Section X-X Section Y-Y

Color Blue

Color Blue

n DIMENSIONS

REFERENCE12X CABLE MOuNT PLuG wITH BACkSHELL

Plug: FCN-261R024-G/xn PART NuMBER

Backshell Kit: FCN-260C024-A/L0

Unit: mm (in.)




n DIMENSIONS

4X LOOPBACk MODuLE - 8 PAIRSFCN-261z008 (ROHS 5/6) - discontinued, replaced by:FCN-261z008L (ROHS 6/6)

17.7 (0.697)

14.4

(0.5

67)

10.3

(0.4

06)

8.7

(0.3

46)

Screw M2.5

7.2 (0.283)

(24.9)[0.980] 49 (1.929) 22.9 (0.902)

7.2

(0.2

83)

S2

S1

S47

S48

n DIMENSIONS

12X LOOPBACk MODuLE - 8 PAIRSFCN-261z024 (ROHS 5/6)- discontinued, replaced by:FCN-261z024L (ROHS 6/6)

7.2(0.283)

41.7 (1.642)

(48.9) [1.925]

21 (0.827)

10.3 (0.406)

8.3 (0.327)

49 (1.929) 20.9 (0.823)

9.61

(0.039)

Unit: mm (in.)

Unit: mm (in.)

S2

S1

S15

S16



n DIMENSIONS4X / 12X BACkSHELL kIT, THuMBSCREwS

Thumb screw

Z

10.5

(0

.413

)

(key slot depth)6.7 (0.264)

Aligner Inner ferrule

Ferrule

Section Z-Z

Spring

49 (1

.929

)

Z

Key (append)

7.7

min

(key

slo

t)

2-M2.5

C4

10.3

(0.4

06)

ScrewK1±0.05 (0.002) (key)K2±0.05 (0.002) (key)

3.75 ±0.05 (0.148±0.002)(key)0.75 ±0.05 (0.029±0.002)(key)

1.7 min.(key slot width)

2.25 ±0.05 (0.089±0.002)(key)

K3±0.05 (0.002)(key)K4±0.05 (0.002)(key)

6.75(0.266) 9.65

(0.380)

C3C2C1

Unit: mm (in.)

n PART NuMBERSPart Number Pair No. C1 C2 C3 C4 K1 K2 K3 K4

FCN-260C008-A/S3 8 29.8(1.173)20.15

(0.793)17.25

(0.679)14.4

(0.567)9.75

(0.384)6.75

(0.266)5.25

(0.207)8.25

(0.325)

FCN-260C024-A/S3 2453.8

(2.118)44.15

(1.738)41.25

(1.624)21.0

(0.827)33.75

(1.329)30.75

(1.211)29.25

(1.152)32.25

(1.270)



FCN-237T-T109/H Hand Press

Ferrule Crimp Dies

Both the press and ferrule crimp tool are required for the ferrule crimp process.

Ferrule Crimp Dies

Note that additional tooling will be added to cover smaller wire bundle O.D.s. Please check with factory.

n ASSEMBLy TOOLS

Part Number Applicable Backshell Applicable Cable OD NotesFCN-261T-T002/H FCN-260C008-A/L0 9.53±0.4 Normally 8 pair, 24AWG

FCN-260C008-A/S3 0.375±0.015FCN-261T-T103/H FCN-260C008-C/L0 8.38±0.4 Normally 8 pair, 26AWG or

28AWGFCN-260C008-C/S3 0.330±0.015FCN-261T-T101/H FCN260C024-C/L1 12.32±0.04

0.485±0.015Normally 24 pair, 26AWG

FCN260C024-C/L1SFCN260C024-C/R1SFCN260C024-C/4FCN260C024-E/L1 10.287±0.4

0.405±0.015Normally 22 pair, 28AWG

FCN260C024-E/L0 11.05±0.40.435±0.015

Normally 24 pair, 28AWG

FCN-261T-T103/H FCN-260C024-C/L2FCN-260C024-C/L5

FCN-261T-T105/H FCN-260C024-A/L0 15.49±0.4 Normally 24 pair, 24AWGFCN-260C024-A/S3 0.610±0.015FCN-260C024-A/LA



1. Set the crimping dies onto the hand press

n INSTRuCTIONS FOR CABLE ASSEMBLy

2. A ferrule and a spring are put on the cable.

a. Strip the cable insulator and put the spring, which shall be moved at the position where it does not interfere with assembly process.

c. A ferrule is put on the position of 2mm from the end of the jacket

e. A shield of pair wires passed through the aligner, and solder the wires onto the paddle card.

After a set is completed

b. The shield braid is turnd back and cut the length of 13mm (0.512 in.)

d. Strip the shield pair of wires (27mm [1.063in.] from the ring edge) and then wire insulation (27.5mm [1.082 in.]).

27mm(1.063)

27.5mm(1.082)

Spring13mm (0.512 in.)

2mm (0.079 in.)



3. Ferrule crimping:

To explain the process clearly, the following photos do not have a paddle card.

a. Set the cable onto right side of the jig, and end of the jig, ferrule edges are made to become parallel, and surface of provisional crimp and the connector made to parallel, pre-crimp the ferrule until part A, D hit parts B, E. (The ferrule becomes an eclipse).

para

llel

Connector

elbaC].ni[)mm(X

riaP GWA

8 42 ]314.0[5.01

42 42 ]416.0[06.51

b. Confirm that lever is tightened hardly. If it isn't, a lever shall be pulled to the front and tightened.

c. Set the cable at the table cavity at the left side. (The ferrule edge/end face shall be parallel to the jig).

If a ring is not able to be inserted into the hollow, loosen with the lever, and insert the ferrule again. Then tighten with the lever.

X(mm)[in.]

d. Crimp ferrule until parts A, D hit parts B, E.

e. Hand press is returned to the original position, and loosened with the lever pulling forward.

f. Crimp completion.



Check Y dimension:

Y (mm) [in]

elbaC].ni[)mm(Y

riaP GWA

8 42 ]524.0[8.01

42 42 ]036.0[00.61

4. Turn back the jacket and cut in the ferrule edge.

cut in the ferrule edge

5. Installation of cover:

g. Set the cable and soldered with the paddle card into the outer cover. (#1 pin position side of the connector shall be on top) and put another cover, and set the spring, which is initially put on the cable, at the edge of the ferrule and install it inside and then fix the covers with the screws.



japanFujitsu Component LimitedGotanda-Chuo Building3-5, Higashigotanda 2-chome, Shinagawa-kuTokyo 141, JapanTel: (81-3) 5449-7010Fax: (81-3) 5449-2626Email: [email protected]: www.fcl.fujitsu.com

North and South AmericaFujitsu Components America, Inc.250 E. Caribbean DriveSunnyvale, CA 94089 U.S.A.Tel: (1-408) 745-4900Fax: (1-408) 745-4970Email: [email protected]: http://us.fujitsu.com/printers/

EuropeFujitsu Components Europe B.V.Diamantlaan 252132 WV HoofddorpNetherlandsTel: (31-23) 5560910Fax: (31-23) 5560950Email: [email protected]: emea.fujitsu.com/components/

Asia PacificFujitsu Components Asia Ltd.102E Pasir Panjang Road#01-01 Citilink Warehouse ComplexSingapore 118529Tel: (65) 6375-8560Fax: (65) 6273-3021Email: [email protected]: http://www.fujitsu.com/sg/services/micro/components/

Fujitsu Components International Headquarter Offices

©2012 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.

Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.Rev. September 13, 2012.

DIFFERENTIAL CONNECTOR - Fujitsu · 2014. 12. 18. · • Skew within Differential Pair: 14.4ps (2...

Documents

Transcript of DIFFERENTIAL CONNECTOR - Fujitsu · 2014. 12. 18. · • Skew within Differential Pair: 14.4ps (2...