Diesel Exhaust Fluid Transfer Pumps › ... › brochure › r8600_f100-457.pdf · Standard Port...
Transcript of Diesel Exhaust Fluid Transfer Pumps › ... › brochure › r8600_f100-457.pdf · Standard Port...
Diesel Exhaust Fluid Transfer Pumps
Built to stand up to the demands of every DEF transfer application.
Flojet’s motor driven diaphragm pumps provide best value for the dollar in commercial, construction, and agriculture environments – whether continuous or intermittent use applications, these pumps are ready to perform whenever needed. These Continuous Duty capable, “On Demand” Diaphragm pumps for DEF fluids offer a “sealless” dynamic rotating design. The UL/CE certifications assure compliance with electrical safety standards.
Features and Benefits
• UL Listed & CE certified; assures compliance with electrical safety standards
• Demand Pump / Pressure Switch turns pump on and off as needed
• Dry run capable – no damage if pump is run after tote empties
• Multiple fluid connection options available – (Barb, BSP)
• Seal-less pump (no shaft seal) leads to reduced maintenance
• Dry priming ability up to 10 feet (3.05m)
• Integral Thermal Protection provides an extra layer of safety
12/24 VDC models configured with alligator clips for convenience and versatility
3/4” HB Fitting 3/4 inch HB Elbow Fitting 1” BSP Fitting
Specifications
Motor Design Permanent Magnet TENV
Voltage Options 12 VDC; 24 VDC; 115 VAC 50/60 Hz
Pump Head Material Glass Filled Nylon
Diaphragm Elastomer TPV - Thermoplastic Vulcanizates (PP/EP Blend)
Check Valve Materials EPDM
Maximum Flow Rate 6.0 GPM (22.7 LPM) Open Flow
Maximum Pressure Shut Off @ 35 PSI (2.4 BAR)
Duty Cycle Continuous up to 30 PSI (2.1 BAR) operating pressure
Weight 7.6 LBS (3.5 kg)
Agency Compliance CE certified (DC models); cULus listed (AC model)
Standard Port Options Straight 3/4” HB; Straight 1” BSP
Other Ports Available 3/4” & 1” Elbow HB; Straight 1” HB
Diesel Exhaust Fluid Transfer Pumps
USAXylem, Inc.17942 CowanIrvine, CA 92614Tel (949) 608-3900Fax (949) 609-3887
UKXylem, Inc.Bingley Road, HoddesdonHertfordshire EN11 OBUTel +44 (0) 1992 450145Fax +44 (0) 1992 467132
GERMANYXylem, Inc.Oststrasse 2822844 NorderstedtTel +49-40-53 53 73-0Fax +49-40-53 53 73-11
© 2016 Xylem, Inc. All rights reserved. Flojet is a trademark of Xylem Inc. or one of its subsidiaries. F100-457 Rev A 12/2016
Warranty: All products of the company are sold and all services of the company are offered subject to the company’s warranty and termsand conditions of sale, copies of which will be furnished upon request. The information provided herein is for guidance only, it does notconstitute a guarantee of the performance or specification of any individual product or component.
www.xyleminc.com
CHINAXylem, Inc.30/F, Tower A Hongqiao City Center of Shanghai100 Zunyi Road, Shanghai 200051, ChinaTel +(86) 21 2208 2888Fax + (86) 21 2208 2999
ITALYXylem, Inc.Via Tommaseo, 620059 Vimercate, MilanoTel +39 039 685 2323Fax +39 039 666 307
5.09(129,3)
3.19(81)
3.09(78,5)
4.72(120)
4.03(102,4)
10.60(269,1)
.20(5,1)3.86
(98,1)(41,3)
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 (3.8) (7.6) (11.4) (15.1) (18.9) (22.7) (26.5)
FLOW RATE GPM (LPM)
40(2.8)
30(2.0)
20(1.4)
10(0.7)
0
PSI
(BA
R)
Part No. GPM (LPM) Volts Max
AmpsSwitch Off PSI (Bar) Included Port Fittings Agency
Compliance Power Connection
R8600604A 6.0 (22.7) 12 VDC 15.0 35 (2.4)
3/4” Straight HB, qty 21” Straight BSP, qty 1
CE 8’ leads with alligator clips
R8600608A 6.0 (22.7) 12 VDC 15.0 35 (2.4) CE 18” stripped wire leads
R8600612A 6.0 (22.7) 24 VDC 8.0 35 (2.4) CE 8’ leads with alligator clips
R8600616A 6.0 (22.7) 24 VDC 8.0 35 (2.4) CE 18” stripped wire leads
08600504A 6.0 (22.7) 115 VAC 1.6 35 (2.4) cULus 6’ cord with 3 prong plug
Dimensional DrawingDimensions shown in inches and (mm)
2.25(57,2)
1.63
Head Flow Chart