Dieci SL Mixer Powerpoint v2016
-
Upload
bob-gamboa -
Category
Documents
-
view
57 -
download
5
Transcript of Dieci SL Mixer Powerpoint v2016
1
Self Loading
Exclusive Philippine DistributorQuality Concrete Construction
Products Phils. Inc.
DIECI
Made in Italy
Dieci Self-loading Truck Mixer 4 Models
4
Specifications L3500 L 4700 F 7000Drum Capacity 3.5 m³ 4.7 m³ 7.0 m³
Concrete Yield 2.5 m³ 3.5 m³ 5.0 m³
Loading Shovel Capacity 0.500 m³ 0.600 m³ 0.600 m³
Water Tank Capacity 700 L 700 L 820 L
Max. Speed 27 kph 27 kph 27 kph
Loading System Self-Loading Self-Loading Self-Loading
Unloading 3 side unloading 3 side unloading Rear Unloading
Dry Weight 6.15 Tons 6.70 Tons 7.40 Tons
Ground Clearance, mm 385 mm 385 mm 420 mm
L x W x H, mm 5060 x 2400 x 3470 5470 x 2400 x 3850 6475 x 2330 x 3990
Engine/Power Iveco NEF- NA/80hp Iveco NEF-TC/ 102hp Iveco NEF -TA/128hp
Engine Displacement 4.5 cm³ 4.5 cm³ 4.5 cm³
Intake Turbo Compressor Turbo Compressor After Cooler Turbo Compressor
Diesel Tank Capacity 90 L / 20 Gal 90 L / 20 Gal 90 L / 20 Gal
OPTIONAL PARTS: Air Conditioning Unit, Power Spray,
Specifications
ISOLATED JOB SITE
NUMBER OF TRIPS 6 X CYCLE
RAW MATS ON SITE
CONDITIONS WHEN DISCHARGING CRITICAL SET UP FACTORS
TO ACHIEVE MAXIMUM CYCLE
SET UP PUMPS
AND DISCHARGE
CEMENT
MOBILE OR TRAILER PUMP CRETE MANPOWER UNLOADING CAPABILITIES
DIECI SELF LOADING MIXERS
27KM/H = 3.3 KMS = ONLY 7.5 MINS TRAVEL TO DISCHARGE LOACATION
DIECI SELF-LOADING MIXER OPERATION
25 MINS LOAD RAW MATS INTO DRUM
25 MINS MIXING
45 MINS SET UP PUMP
CYCLE TIME
45 MINS DISCHARGING 7.5 MINS TO GO BACK
Rated Capacity 5 cu.m. 2.5 Hrs x 6 Cycles /15Hrs• Loading time: 25 mins Max• Mixing Time: 25 mins• Travel Time: 27km / hour ( loaded) say 7.5 Minutes for distance of 3.3kms • Pump set up time: 45 mins/ set up concrete pump x number of locations• Discharging cement into project site: 45 mins to discharge 5cu.m.• Waiting Time/Rest Time Cycle: 15 mins• Complete Cycle/ 15 hrs: Six ( 6 ) Complete trips of loading and discharging l 1x
5cum F-7000 Model= 6 Cycles ; 1x3.5cu.m. L-4700 Model = 5 CyclesNote: Operating Cycle varies on Team effort and Operator Skills
Advantages vs. Ready Mix Cement Delivery• No Truck Mixer needed. Flexible working time vs. set hour of scheduled RMC delivery• Reduce early hardening of cement due to travel time ( traffic ).• No need for Batching Plant; Saves expensive cost of batching plant and truck mixers • No Municaipal Permits to put up a batching plant or register Truck Mixers with LTO• Reduce Manpower – Dieci Self Loading Mixer is a One-Man Operation
Longevity of Euro Parts • Heavy Duty Iveco NEF Engine ( made in Spain ) Bosh Rexroth Hydrostatic
Transmission ( German ) Dana Spicer Axel Driveshaft Cylinders ( Italy ) All Euro Parts • Uses Mineral Oil Fuels which is 3 times or cheaper than synthetic oils; Also uses
regular Diesel Fuel available here in the Phils. Economical Save on 20% on Fuel Cost
RAW MATERIAL ON SITE
CAN OPERATE ON ROUGH TERRAIN
DIECI Self Loading Mixer Features and Advantages
ON SITE UNLOAD
RMC Transit Mixer Limitations vs. DIECI SL Mixer ability to operate in distant locations
NO BATCHING PLANT NEARBY
DRYING TIME OF RMC
DELIVERY
RMC NOT AVAILABLE
CAN TRAVERSE TIGHT AND INCLINE ROADS
SERVICES ISOLATED PROJECT LOCATIONS
CHOOSE CENTRAL RAW
MATERIAL AREA
DIECI Self Loading Mixer Best for Isolated Projects within Proximity
CENTRAL RAW
MATERIAL AREA
Plan for other Equipment needed like a Truck Mounted Concrete Pump or Trailer
SUPPORT EQUIPMENT
Proj
ect
D
Proj
ect A
Proj
ect B
Proj
ect C
Road
s an
d Su
bdi
visio
ns
Hous
ing
War
ehou
se
Build
ing
TYPE OF PROJECT
DIECI Self Loading Mixer Advantages• The advantage of Dieci Self loading truck mixers produce your
ready mix in the actual job site and deliver it to several nearby job sites instead of mixing it at the batching plant and delivering to a remote location
• It can produce ready mix as much as 5 cubic meter every 2.5 hours and repeat the cycle six ( 6 ) times per day.
• Critical to develop is the learning curve with oading, mixing, pump set up discharging and turnaround time
• It has its own in-truck built in batching equipment with an electronic weighing system with sensors , self-loading equipment i.e. shovel and drum, on-board water system and an auxiliary pump and engine in the self-loading mixer truck .
• Save on the cost on the investment of a batching plant and truck mixers. Also saves on manpower and provides accuracy.
10
AN ALL TERRAIN MOBILE BATCHING PLANT• All-in-One “ON SITE” mixing, Self Loading and Unloading Capability• Rough Terrain Transportation• Rotating Driver’s Seat• Ideal for tight and isolated work site• Raw materials at the jobsite capable of batching up to 5cum per cycle• Electronic Weighing System wit multi sensor in shovel and drum reads mix
SELF LOADING CAPABILITY• Built-in Bucket for Raw material Scooping or Loading
3 SIDE UNLOADING CAPABILITY• REAR unloading• LEFT SIDE unloading• RIGHT SIDE unloading
ARTICULATED STEERING • 2 wheels Front Steering – for long no load long distance travelling• Beam Steering – to steer at the least possible radius• Transversal or Crab Steering – to move diagonally
SAFETY FEATURES• ROPS and FOPS• Dead Man’s Switch• Starting Only in Neutral Gear Shift
DIECI Self Loading Mixer Features
11
DIECI Under Chasis
1. Transaxel2. Driveshaft3. Hydraulic motor4. Diesel engine5. Variable displacement pump6. 2-speed transmission7. Hoses8. 8 Steering cylinder9. 9 Planitary final drive
123456789
THE HYDROSTATIC SYSTEM
HYDROSTATIC SYSTEM WITH “DA”• THE BOSH REXROTH HYDROSTATIC TRANSMISSION IS MADE
IN GERMANY
• THIS SYSTEM IS COUPLED WITH THE 74 KW TURBO ENGINE AND WITH THE 94 AND 103 KW TURBO-INTERCOOLER ENGINE. THIS IS USED IN THE DIECI SL MIXER F-7000
• IT HAS 2 MECHANICAL GEARS DUE TO THE GEARBOX AND ITS MAIN FEATURE, THE INFINITE GEARS OF THE SYSTEM PUMP-MOTOR
• WITH TWO SMALL HOSES FROM THE PUMP, THE SYSTEM SEND TO THE MOTOR A PRESSURE INFORMATION. WITH THIS THE MOTOR SET ITSELF IN THE MOST SUITABLE DISPLACEMENT FOR THE WORKING CONDITIONS OF THE MACHINE
HYDROSTATIC SYSTEM WITH “EZ”
• THE BOSH REXROTH HYDROSTATIC TRANSMISSION IS MADE IN GERMANY
• THIS HYDROSTATIC SYSTEM IS COUPLED WITH THE 60 KW ASPIRATE ENGINE. THIS IS USED IN SMALLER MODELS
• THIS SYSTEM HAS 4 GEARS, YOU CAN CHANGE THEM MANUALLY
• IT HAS 2 MECHANICAL GEAR DUE TO THE GEARBOX
• IT HAS 2 ELECTROHYDRAULIC GEARS DUE TO THE MAX/MIN DISPLACEMENT OF THE MOTOR
VARIABLE DISPLACEMENT PUMP
Electronic Weighing System with Printer
3-Side Unloading with Rotating Drivers Seat
Loading Shovel
FUEL EFFICIENCY
QUALITY CONCRETEDieci Heavy Equipment SL F-7000 MixerOPERATING REVENUE
Cost of Investment: VAT Included 6,500,000 VAT Excluded 5,803,571
Yearly Depreciation 1,160,714.29
1st year 2nd year 3rd year
AMOUNT % AMOUNT % AMOUNT %
Benefits (based on P3800 Ready Mix Cost) 34,200,000.00 34,200,000.00 34,200,000.00 (P3800 x 6 cycles x 25 days in a mo. x 12 months x 3.5 / 5 cu.m load)
Benefits 34,200,000.00 100.00 34,200,000.00 100.00 34,200,000.00 100.00 Raw Materials 24,068,376.83 70.38 24,068,376.83 70.38 24,068,376.83 70.38 Gross Profit 10,131,623.17 29.62 10,131,623.17 29.62 10,131,623.17 29.62
Operating Expenses:Labor Cost 562,500.00 1.64 562,500.00 1.64 562,500.00 1.64 Repairs & Maintenance 594,000.00 1.74 990,000.00 2.89 1,320,000.00 3.86 Depreciation 1,160,714.29 3.39 1,160,714.29 3.39 1,160,714.29 3.39 Admin (3%) 1,026,000.00 3.00 1,026,000.00 3.00 1,026,000.00 3.00 Total 3,343,214.29 9.78 3,739,214.29 10.93 4,069,214.29 11.90
Operating Revenue 6,788,408.88 19.85 6,392,408.88 18.69 6,062,408.88 17.73
Raw Materials3. 5 cu.m. to
kg
UNIT PRICE KGUNIT
PRICE / 3.5 CU M
TOTAL COST PER 3.5 CU M
X 6 CYCLES
X 25 DAYS IN A MONTH x 12 months
A B C D = B / C E = D x A F = E x 6 G = F x 25 H = G x 12
S1/ 3/8/ 3/4 MIX 6,000 775.00 1,480 0.52 3,141.89 18,851.35 471,283.78 5,655,405.41
CEMENT 1,600 208.00 40 5.20 8,320.00 49,920.00 1,248,000.00 14,976,000.00
SAND 3,000 850.00 1,400 0.61 1,821.43 10,928.57 273,214.29 3,278,571.43
WATER 880 0.10 88.00 528.00 13,200.00 158,400.00
TOTAL COST FOR ONE YEAR 24,068,376.83
Labor NO. OF MANPOWER
NO. OF HOURS HOURLY RATE DAILY
RATE MONTHLY YEARLY
LABOR OPERATOR 1 10 187.50 1,875.00 46,875.00 562,500.00
Repairs 1st year 2nd year 3rd year
Preventive Maintenance
220,000.00
385,000.00
550,000.00
Corrective Maintenance
330,000.00
550,000.00
770,000.00
Training Travel and Misc
44,000.00
55,000.00
66,000.00
Total Maintenance Cost
594,000.00
990,000.00
1,320,000.00
QUALITY CONCRETEDieci Heavy Equipment SL L-4700 MixerOPERATING REVENUE
Cost of Investment: VAT Included 5,500,000 VAT Excluded 4,910,714
Yearly Depreciation 982,142.86
1st year 2nd year 3rd year
AMOUNT % AMOUNT % AMOUNT %
Benefits (based on P3800 Ready Mix Cost) 23,940,000.00 23,940,000.00 23,940,000.00 (P3800 x 6 cycles x 25 days in a mo. x 12 months x 3.5 / 5 cu.m load)
Benefits 23,940,000.00 100.00 23,940,000.00 100.00 23,940,000.00 100.00 Raw Materials 16,847,863.78 70.38 16,847,863.78 70.38 16,847,863.78 70.38 Gross Profit 7,092,136.22 29.62 7,092,136.22 29.62 7,092,136.22 29.62
Operating Expenses:Labor Cost 562,500.00 2.35 562,500.00 2.35 562,500.00 2.35 Repairs & Maintenance 540,000.00 2.26 900,000.00 3.76 1,200,000.00 5.01 Depreciation 982,142.86 4.10 982,142.86 4.10 982,142.86 4.10 Admin (3%) 718,200.00 3.00 718,200.00 3.00 718,200.00 3.00 Total 2,802,842.86 11.71 3,162,842.86 13.21 3,462,842.86 14.46
Operating Revenue 4,289,293.36 17.92 3,929,293.36 16.41 3,629,293.36 15.16
Raw Materials 3. 5 cu.m. to kg
UNIT PRICE KGUNIT
PRICE / 3.5 CU M
TOTAL COST PER 3.5 CU M
X 6 CYCLES
X 25 DAYS IN A MONTH x 12 months
A B C D = B / C E = D x A F = E x 6 G = F x 25 H = G x 12
S1/ 3/8/ 3/4 MIX 4,200 775.00 1,480 0.52 2,199.32 13,195.95 329,898.65 3,958,783.78
CEMENT 1,120 208.00 40 5.20 5,824.00 34,944.00 873,600.00 10,483,200.00
SAND 2,100 850.00 1,400 0.61 1,275.00 7,650.00 191,250.00 2,295,000.00
WATER 616 0.10 61.60 369.60 9,240.00 110,880.00
TOTAL COST FOR ONE YEAR 16,847,863.78
Labor NO. OF MANPOWER
NO. OF HOURS HOURLY RATE DAILY
RATE MONTHLY YEARLY
LABOR OPERATOR 1 10 187.50 1,875.00 46,875.00 562,500.00
Repairs 1st year 2nd year 3rd year
Preventive Maintenance
200,000.00
350,000.00
500,000.00
Corrective Maintenance
300,000.00
500,000.00
700,000.00
Training Travel and Misc
40,000.00
50,000.00
60,000.00
Total Maintenance Cost
540,000.00
900,000.00
1,200,000.00
QUALITY CONCRETE
Dieci Heavy Equipment SL Mixer L-4700
RATE OF RETURN OF INVESTMENT (ROI)
Cost of Investment: VAT Included 5,500,000 Yearly Depr. 982,143 5 Yrs to depreciate
VAT Excluded 4,910,714
Let CI represent the Cost of Investment (VAT Excluded) 4,910,714
RATE OF RETURN Average Operating Revenue (AOR) 3,949,293
80.42%OF INVESTMENT Investment 4,910,714
AVERAGE NET(AOR + D) - (AOR x 30%) 3,746,648
CASH INFLOW
PAYBACK Cost of Invesment 4,910,714 1.31 years
PERIOD Average Net Cash Inflow 3,746,648
YEAR
OPERATING REVENUE RATE OF ROI (Before
tax)OR % to SALES NET CASH INFLOW PAYBACK PERIOD
REMARKSYEARLYA B = A / C1 C = (A+D) - (A x 30%) D = CI / C
1 YR 4,289,293 87.35% 17.92 3,984,648 1.23 2 YRS 3,929,293 80.01% 16.41 3,732,648 1.32 Viability Point3 YRS 3,629,293 73.91% 15.16 3,522,648 1.39
Average 3,949,293 3,746,648
=
=
=
QUALITY CONCRETE
Dieci Heavy Equipment SL Mixer F-7000
RATE OF RETURN OF INVESTMENT (ROI)
Cost of Investment: VAT Included 6,500,000 Yearly Depr. 1,160,714 5 Yrs to depreciate
VAT Excluded 5,803,571
Let CI represent the Cost of Investment (VAT Excluded) 5,803,571
RATE OF RETURN Average Operating Revenue (AOR) 6,414,409
110.53%OF INVESTMENT Investment 5,803,571
AVERAGE NET(AOR + D) - (AOR x 30%) 5,650,801
CASH INFLOW
PAYBACK Cost of Invesment 5,803,571 1.03 years
PERIOD Average Net Cash Inflow 5,650,801
YEAR
OPERATING REVENUE RATE OF ROI (Before
tax)OR % to SALES NET CASH INFLOW PAYBACK PERIOD
REMARKSYEARLY
A B = A / C1 C = (A+D) - (A x 30%) D = CI / C1 YR 6,788,409 116.97% 17.92 5,912,601 0.98 2 YRS 6,392,409 110.15% 16.41 5,635,401 1.03 Viability Point3 YRS 6,062,409 104.46% 15.16 5,404,401 1.07
Average 6,414,409 5,650,801
=
=
=
Other Dieci Telehandler Products