DialogP_sm_Chapter_7-3_3-2008 pecas.pdf

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 1

BA-TE-DE08C M.KAY Dialog+_sm_Chapter 7-3_3-2008.doc/pdf <080602> yymmdd B. Braun Avitum AG

Contact your LocalB. Braun Representative

for Service Support

Spare Parts List The spare parts list (edition 3/2008, edition date 2008-06-02)is valid with immediate effect. All previous spare parts listsare invalid.

Refurbished Spare Parts Conditions for Delivery of Refurbished Spare Parts (dependingon availability):Defective spare parts must be sent back with theaccompanying documents (Material Return Form) to B. BraunAvitum AG via the representative of the respective country forthe ability to supply refurbished spare parts. The condition andthe version of the defective spare parts must allow a qualifiedrefurbishment.

Backward Compatibilityof Spare Parts

New spare parts always have article numbers with numericcharacters and are backward compatible unless otherwisespecified in the spare parts list. If a spare part is modified the lastdigit of the article number changes to an alphabetic characterwith the initial index A. These spare parts are in principlebackward compatible to the previous article number (numeric oralphanumeric - with or without an index). See table with anexample for the switch mode power supply SMPS.

34519572

34514740

3451957A

3451474A

3451957B

3451474B

3451957C3451957D

- new numerical art. no.

- new numerical art. no.- backward compatible

- present alphanumerical art. no.- backward compatible

- alphanumerical art. no.- initial index A- backward compatible

- alphanumerical art. no.- initial index A- backward compatible

B. Braun Avitum AGSchwarzenberger Weg 73 - 79

34212 MelsungenGermany

Technical Hotline (Germany): Tel. No.: +49 5661 71 3796

Technical Support (Germany): Tel. No.: +49 5661 71 3500

Spare Parts (Germany): Tel. No.: +49 5661 71 3662E-Mail: [email protected]

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 2


B. Braun Avitum AGWareneingang - Service

Schwarzenberger Weg 73-79

D-34212 MelsungenGermany

Reason for returning the part (please tick !):

Warranty return (replacement to be ordered separately) ----------------"Defective part for refurbishment --------------------------------------"Wrong shipment -----------------------------------------------------"Complaint sample (use complaint form for details) ---------------------"Part returned for investigation ----------------------------------------"Part returned for disposal by the manufacturer -------------------------"

Sender: Name of Company: ....................................................................................................................................................................................................

..........................................................................................................................................................................................................................................................

............................................................................................................................... City: ...............................................................................................................

Country: .............................................................................................................. Name of responsible person: ..................................................................

Customer number: ........................................................................................... Telephone/e-mail: .....................................................................................

Returned part: Article number: ................................................................. Part serial number: ...................................................................................

Part description: .........................................................................................................................................................................................................................

Description of the defect: ........................................................................................................................................................................................................

..........................................................................................................................................................................................................................................................

From machine type: .................................................. Serial number: ................................................. Working hours: .......................................

Software Version: ......................................................... Description of the problem on the machine: ....................................................................

..........................................................................................................................................................................................................................................................

..........................................................................................................................................................................................................................................................

The described defect appears: Intermittently " Permanently " (please tick !)

Cleaned/disinfected: Cleaned " yes Disinfected " yes (please tick !)

Disinfectant: ......................................................................................................................................................................

Cleaning and Disinfection of Spare Parts Used in a Dialog MachineAll spare parts sent by the customer to the B. Braun representative for repair, complaint, refurbishment, technical analysis orwarranty must be cleaned and disinfected (exception: boards). Spare parts considerably soiled, damaged or not disinfected arescrapped.

Packaging Notice:Each returned part must be properly packed to prevent any damage during transportation due to mechanical impact ordue to electrostatic discharge. The safest way to prevent damage is by using the packaging material from the new sparepart and by packing the returned part exactly in the same way.Returned parts containing electronic components (electrostatic sensitive devices) must be packed in special ESD packagingmaterial. Only shielded bags or antistatic bags may be used. Unprotected electronic parts (e.g. wrapped in normal plastic bags orparts padded with Styrofoam) are assumed to be damaged by electrostatic discharge and will be scrapped.

Material Return Form

This form must be attached to every spare part sent back to your B. Braun representative!Spare parts without this form are scraped.

Please Copy!

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 3


!

Copyright This technical documentation remains with all rights the property of B. Braun Avitum AG.

Commissioning and Service Only trained personnel must commission and service the Dialog.Servicing must only be performed with proper tools, calibration equipment and be in accordancewith the most recent revision of this service manual/technical information, which must be clearlyand thoroughly understood.

Prevent Electrical Shock Hazard Switch off the Dialog and disconnect unit from mains if you have to open the machine forservicing.Do not touch any exposed wiring or conductive surfaces while the Dialog is opened. The voltagespresent when electrical power is connected to the Dialog can cause serious injury or death.

High Voltage in TFT Monitor If a battery option is present in the machine:High voltage can be present at the backlight inverter board BIB in the TFT monitor, even if themachine has been disconnected from mains. Pull out the battery compartment in the baseplatform and switch off the battery voltage before opening the machine!

Protective Conductor in TFT Housing If the TFT housing had to be opened during a service job, the tight seat of the protectiveconductors in the TFT housing must be checked.

Connection and Operation Service Board The service board must only be operated in the TSM service program. If the service board isconnected to the Dialog it is prohibited to connect a patient to the Dialog and to run a therapy.

Prevent Chemical Burns and Scalding During servicing on running machines: prevent chemical burns and scalding of the skin due tothe penetration of disinfectant or hot liquid.

Contaminated Machines Protective gear should be worn in case of servicing of assumed contaminated machines.

Cover in Rear Door Servicing of mechanical assembly groups (components in contact with fluid): the black cover inthe rear door must be assembled during servicing because it serves as a spray protection for theassembled printed circuit boards.

Tubing Tubing must be replaced only by the same tubing type/length and identical installation manner.Make sure that the tubings in the machine are not kinked or twisted after servicing (e.g. if sub-racks are pulled out and inserted again). The tubing must not touch moving/rotating components(e.g. motors of gear pumps).

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 4


Wiring Wiring must be replaced only by the same cable type/length and identical installation manner. Thecables must not touch moving/rotating components (e.g. motors of gear pumps).

O-rings Always check o-rings from disassembled groups/components and replace if necessary.

ESD Requirements Pay attention to ESD requirements, because electronic components are sensitive to electrostaticdischarges.

Figures The displayed figures can differ slightly from the machines on site, due to different hardwarestatuses.

Calibration Only perform a calibration after the Dialog has reached working temperature.

You should save the calibration data to the hard disk drive before you exit the TSM serviceprogram: TSM Main Menu, File Operations, Save Calibration Data.

Battery Option High voltage can be present in the basic housing and TFT monitor due to the battery, even if theDialog has been disconnected from mains. Pull out the battery compartment in the base platformand switch off the battery voltage before opening the machine.

Fuses If fuses are replaced they must exactly match the type and rating specified by the manufacturer inthe spare parts list/technical information. Where applicable: fuses must be approved by UL/CSA.

Spare Parts Only use original spare parts manufactured and sold by B. Braun Avitum AG.

TSM Service Program Only activate the TSM service program for service activities. It is prohibited to connect a patient tothe Dialog and to run a therapy if the TSM service program is activated in the Dialog.If the TSM service program is activated the audible alarm is switched off.The TSM service program is started in the service mode: supervisor board, hardware switch K1,position 2.

Software The software is installed in the software mode: supervisor board, hardware switch K1, position 3.Therapy Mode After completion of all procedures switch back to the therapy mode: supervisor board, hardware

switch K1, position 0.

Function Check Check the respective function of the assembly group/component after servicing.A complete function check must be performed after every service, according to the operatinginstructions.

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 5


Table of Contents Page

7.1 Sub-Racks 7-87.2 Solenoid Valves 7-97.3 Water Inlet Sub-Rack 7-107.3.1 Upline Tank 7-147.4 DF Sub-Rack 7-157.4.1 DF Distribution Manifold 7-167.4.2 Piston Pumps 7-187.5 UF Sub-Rack 7-197.5.1 Balance Chamber 2 7-207.5.2 Air Separator Assembly Group 7-217.6 Top Level Sub-Rack 7-227.6.1 Motherboard GX1LCD 7-227.6.2 Motherboard GX1LCD with USB Connector 7-237.6.3 LVDS Adapter Settings for TFT Display 7-247.7 Rear Door 7-257.7.1 Compatibility Table for Boards 7-277.7.2 Switch Mode Power Supply SMPS (Benning) 7-287.7.2.1 Compatibility Table SMPS (Benning) 7-297.8 Front Door 7-307.9 Basic Housing 7-337.9.1 Concentrate Suction Rods 7-357.9.2 Rinsing Chambers for Concentrate Suction Rods 7-367.9.3 Central Concentrate Supply (Option) 7-387.9.4 Rinsing Bridges 7-407.9.4.1 Rinsing Bridge 3 7-40

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 6


Page

7.9.4.2 Rinsing Bridge 4 (Short) 7-437.10 TFT Monitor 7-467.11 Test and Calibration Equipment and Tools 7-487.12 Service Kits 7-507.13 Software 7-517.13.1 Compatibility Table Software 7-527.14 Miscellaneous 7-537.15 HDF Bag (Option) 7-557.15.1 Flow Detector 7-567.15.2 UF Piston Pump 7-577.15.3 HFS Board 7-577.16 Staff Call (Option) 7-587.17 Bicarbonate Cartridge Holder with Valve (Option) 7-597.17.1 BIC Cartridge Holder with Valve 7-597.17.2 Air Separator LAB2/Valve VBICP and Valve VVB 7-607.17.2.1 Valve VBICP and Valve VVB (without Air Separator LAB2) 7-617.17.3 Air Separator LAB1, Throttle DBK and Valve VBKO/VBKS 7-627.17.4 BIC Cartridge Holder Boards 7-637.18 HDF Online (Option) 7-647.18.1 Substitution Port 7-657.18.2 UF Sub-Rack HDF Online 7-667.18.3 Valve Block HDF Online 7-677.18.4 Boards HDF Online 7-68

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 7


Page

7.18.5 DF/HDF Filter Holder HDF Online 7-697.19 Automatic Blood Pressure Measurement ABPM (Option) 7-717.19.1 Automatic Blood Pressure Measurement ABPM Module M2000 7-717.19.1.1 Compatibility Table ABPM Module M2000 7-727.19.2 Automatic Blood Pressure Measurement ABPM Module M2005 7-737.19.2.1 Compatibility Table ABPM Module M2005 7-747.20 Battery (Option) 7-757.20.1 Battery Sub-Rack 7-767.21 Nexadia -/WAN-BSL (Option) 7-777.22 Card Reader (Option) 7-787.23 Spare Parts List Alphabetical Order 7-797.24 Changes/Modifications in Spare Parts List 7-95

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 8Pos. Art. No. Qty. Description Comments


7.1 Sub-Racks1 - Top level sub-rack see paragraph 7.6 for

single parts

2 - UF sub-rack see paragraph 7.5 forsingle parts

3 - DF sub-rack see paragraph 7.4 forsingle parts

4 - Water inlet sub-rack see paragraph 7.3 forsingle parts



2

1

AB C

1a

7.2 Solenoid Valves1 3451902B 1 Solenoid valve 2/2 way coil straight, connector/flange (AKM)

(pay attention to bottom notes)

1a 34560270 1 Solenoid valve 2/2 way coil straight, connector/flange (DPP)(pay attention to bottom notes)

2 3451906B 1 Solenoid valve 2/2 way coil straight, connector/connector (AKM)

Notes forSolenoid Valve 3451902B

Self-Locking Nut ADo not readjust the self-locking nut A, because the nutis assembled with a definedtorque (1.3 Nm ± 10 %).

The position of the magnet coilcan be adapted to the assemblylocation, i.e. the coil can becarefully turned (B or C)without loosening the self-locking nut A. The procedure isonly permissible if the coil canbe turned without much effort.

1iiiiii

2ivv

iv 1 x Screw 40x10v 1 x Washer 4.2

i 1 x Screw M4ii 2 x Spring Washer 4.2iii 1 x Washer 4.2



7.3 Water Inlet Sub-Rack1 3451902B 1 Solenoid valve 2/2 way coil straight, connector/flange (AKM)

1 34560270 1 Solenoid valve 2/2 way coil straight, connector/flange (DPP)

2 34770852 5 O-ring 11.1 x 1.6

3 3477084A 5 Tubing connector ∅ 7 x 1/8" plastic

4 3451727B 1 Throttle 0.4 bar

4 3451664B 1 Throttle 1.3 bar for Dialog with HDF online

4 34570683 20 O-ring 4.47 x 1.78

5 3451969B 1 Heater element 120 V/1800 W lubricate thread and assemble heater

5 34519580 1 Heater element 240 V/1800 W element only hand-tight

5 34516018 1 Seal for heater element

5 34519378 1 Cylinder for heater element

PE

RVE

18

17

2,3EP

PE

EK

16

17

7

2,12

TSHE(LAB1)

KP

4

2,3

2,3

1

2,3

13,14,15

5 6

7

6

2,3

16

92,10 2,811

VZ/RVDA assembled on the rinsingchambers for the concentrate suctionrods (see paragraph 7.9.2 for details).



Water Inlet Sub-Rack6 3451614B 1 Temperature sensor without connector

6 3477104A 10 O-ring 8.3 x 2.4

7 34511342 1 Glass cylinder

7 34771158 2 Seal

7 34513540 1 Sieve disc

7 34771166 20 O-ring 3.68 x 1.78

8 34570306 5 Reducer tubing connector

9 34516069 1 Throttle 0 - 4 bar

10 34517243 1 Tubing connector ∅ 7 x 1/8" stainless steel



13 34560165 1 Upline tank with lid see separate figure

5

4

2,3

2,3

1

6

7

6

2,12

2,12

92,10 2,8

2,3

2,3

11

13,14,15

2,3

VZ/RVDA assembled on the rinsingchambers for the concentrate suctionrods (see paragraph 7.9.2 for details).



19

Water Inlet Sub-Rack16 34560319 1 Gear pump (Micropump

version 2) with magnet,without motor

Micropump version 2 (replaces Gather pump) forEP only. EP assembled in horizontal position fromserial no. 22657/90207 either with adapter A or

modified degassing block B

16 3451663A 1 Motor

16 34770950 20 O-ring 8.0 x 1.6

17 34516131 1 Pressure sensor - 660 mbar

17 34773762 10 O-ring 9.25 x 1.78

18 34516123 1 Proportional control valve

19 34511547 1 Heat exchanger(option)

insulation material and cable ties are obsolete and notrequired after replacement or retrofitting the option

MicropumpVersion 1

MicropumpVersion 2

H PE

2,37

18

17

16

2,3

6

13,14,15

9

11



Water Inlet Sub-RackA 34514856 1 Retrofit kit adapter for degassing

pump EP:1 x adapter, 2 x o-ring, 4 x screw M4x20,8 x spring washer ,4 x washer, assembly instructions

degassing pump EP can beassembled in horizontal position

via adapter 1 (see figure A)

EP

B

H

PEEP

9

11

2,37

18

172,12

16

2,3

2,3

6

13,14,15

EP1 A

H

VB

EP PE

16 2,122,3

5

13

17



7.3.1 Upline Tank13 34560165 1 Upline tank with lid version 2

with extruded tubing connectors

14 3451604B 1 Level sensor complete with float ball

15 34560246 1 Float ball incl. o-ring the o-ring B must be assembled additionallyduring the assembly of the float ball A

(see figure)

14

15

A

B

13,14,15



7.4 DF Sub-Rack1 3451416B 1 DF distribution manifold

(preassembled)with throttle, without tubing connector

see separate figure for single parts

2 - - KP piston pump with vibration dampener see separate figure forsingle parts paragraph 7.4.2

3 - - UFP piston pump with vibrationdampener

see separate figure forsingle parts paragraph 7.4.2

4 - - BICP piston pump with vibrationdampener

see separate figure forsingle parts paragraph 7.4.2

321 4 1



9,10

11,12,13,14

6,7,8 2,5 2,4 3

1,2

11

14

12

13

1067

8

7.4.1 DF Distribution Manifold1 34515330 1 Gear pump (Micropump version

1) with magnet, without motorMicropump version 1 for FPE/FPA only.

FPE and FPA must be from same type (mixedassembly not permissible)

1 3451663A 1 Motor

2 34770950 20 O-ring 8.0 x 1.6

3 34771140 20 O-ring 3.1 x 1.6

4 3451610B 1 END conductivity sensor

5 3451611B 1 Bicarbonate conductivity sensor

6 34570373 10 Plug (long)

7 3451614B 1 Temperature sensor without connector

8 3477104A 10 O-ring 8.3 x 2.4


10 34770852 5 O-ring 11.1 x 1.6

11 34770925 5 Plug

12 34771050 10 Pressure spring 500 mmHg

13 34772928 3 Centre disc

14 34771085 5 Seal

MicropumpVersion 1

MicropumpVersion 2



DF Distribution Manifold15 34570381 10 Plug (short)

16 3477103A 2 Tubing connector ∅ 3.5 x 1/8" plastic

16 34514961 1 Reducer tubing connector ∅ 8 x 1/8" if necessary substitute for tubingconnector A


18 34570683 20 O-ring 4.47 x 1.78

- 34514953 1 Reducer if necessary insert for RVB

RVFPE

TSD-S

TSD

9,10 17,18 9,10

7,8,15

7,8,15

10,16

9,10

RVB

A



1

4

1 1

3 3

B

A

7.4.2 Piston Pumps1 3451749E 1 Piston pump for UF/BICP/KP piston pump. Return valve additionally

necessary for standard UF piston pump.

2 3451789D 1 Piston pump (HDF bagoption)

for HDF bag option.return valve not necessary

3 34519246 1 Reed sensor complete4 34514988 1 Return valve, incl.

2 x tubing clamps,2 x cable ties

return valve RV necessary for standard UFPreplaces one-way bearing 3451754A.

(serial no. 24488,24491-24497,24499-24501,24503-24506,24508-24515,24525-24527 and from serial no. 24531/90549).

5 34560556 1 Motor for piston pump6 34560572 1 Bell joint for piston pump7 34560602 1 Pump body for piston pump8 34560564 1 Plastic elbow for piston pump- 7703848 1 Assembly jig (motor piston pump) required for motor assembly

3

2

5

63

7

5

83

7

VBP

VABK1

VABK2

VDABK1

VDABK2

BK1

BK2

MSBK2

MSBK1

VLA

LAFS

FBK2FPA LA

RVFPA

C B

UFPRV

C B

UFPRV



VEBK1

VDA

VEBK2

VABK2 VDABK1

VDABK2 VABK1

VDEBK2

MSBK2

MSBK1

VDEBK1

BK1/2

VLA

RVFPA

VBP

DDE

LA

FPA

1 27.5 UF Sub-Rack

1 - - Balance chamber 2 see separate figure

2 - - Air separator complete see separate figure



1 2 1

34

1 2 1

34

7.5.1 Balance Chamber 21 3451902B 1 Solenoid valve 2/2 way manuf. AKM only, coil straight, connector/flange

1 34770852 5 O-ring 11.1 x 1.62 3451897A 1 Repair kit balance

chamberfor complete replacement of both membranes, incl. all o-

rings/assembly parts (self-locking nuts, screws, springs etc.)

2 3451615A 2 Membrane for balance chamber3 34519092 1 Coil3 34770976 10 O-ring 15.6 x 1.783 3451665A 2 Membrane position sensor board exchange as pair only

4 3451906B 1 Solenoid valve 2/2 way manuf. AKM only,coil straight, connector/connector

- 34570195 20 Tubing clamp SNP-1.5 ∅ 7-8 mm plastic

- 34570209 20 Tubing clamp SNP-4 ∅ 10-11 mm plastic

180o



1,2

2,34

5,6

2,710

10

6,92,8

7.5.2 Air Separator Assembly Group1 3451902B 1 Solenoid valve 2/2 way coil straight, connector/flange (AKM)


2 34770852 5 O-ring 11.1 x 1.6


4 34515330 1 Gear pump (Micropump version1) with magnet, without motor

Micropump version 1 for FPE/FPA only.FPE and FPA must be same type (mixed

assembly not permissible)

4 3451663A 1 Motor


6 34570683 20 O-ring 4.47 x 1.78


8 3477103A 2 Tubing connector ∅ 3.5 x 1/8" plastic


10 3456018A 1 Housing with lid (air separator)

10 34560190 1 Lid (air separator)

180o

MicropumpVersion 1

MicropumpVersion 2



7.6 Top Level Sub-Rack7.6.1 Motherboard GX1LCD

1 3451458A 1 Hard disk drive 40 GB

2 3451404A 1 Motherboard GX1LCD ex works the BIOS of the GX1LCD is set toBIOS version 1.9 (for SW ≥ 7.58)

2 34514791 1 SODIM module 64 MB

2 34519327 1 Battery BR2032, 3V

3 3451419A 1 Low voltage differentialsignal adapter LVDS

setting for TFT display: see paragraph 7.10.1LVDS adapter setting for TFT display

4 34516662 1 Floppy disk drive 3.5"

1 2 3

LVDS

GX1LCDHard Disk Drive

Floppy Disk Drive FDD

Red dot conductor 1Roter Farbpunkt Ader 1

4



7.6.2 Motherboard GX1LCD with USB Connection1 3451458A 1 Hard disk drive 40 GB

2 3451404A 1 Motherboard GX1LCD ex works the BIOS of the GX1LCD is set toBIOS version 1.9 (for SW ≥ 7.58)

2 34514791 1 SODIM module 64 MB

2 34519327 1 Battery BR2032, 3V

3 3451419A 1 Low voltage differentialsignal adapter LVDS

setting for TFT display: see paragraph 7.10.1LVDS adapter setting for TFT display

- 34560238 1 Ground cable compl. (TLC sub-rack)

2 1

USB

Hard Disk Drive

3



7.6.3 LVDS Adapter Setting for TFT Display- 3451419A 1 Low voltage differential signal

adapter LVDSon GX1LCD motherboard

LVDS Adapter Version 1

DIL Switch BoeHydis/Samsung(3.3 V)

1 2 43 5 6

ON

OFF

DIL Switch Philips(5.0 V)

1 2 43 5 6

ON

OFF

LVDS Adapter Version 2



HOP BIC-KV

PB2 PB1

Supervisor Board SB

Controller Board CB

SMPS

98 2

1

3

4

5

6

7

7.7 Rear Door- 34560424 1 Internal cover rear door- 39410625 1 Cap ∅ 44 mm for internal cover

1 34517610 1 Fan 80 x 80 mm with connector1 34570284 5 Dust filter

Power Boards PB2 34519424 1 Power board 1 version 2 see 7.7.1

3 34514201 1 Power board 2 version 3 see 7.7.1

3 34514236 1 Power board 2 version 3 for HDF bag, see 7.7.1

Supervisor Board SB4 3451461A 1 Supervisor board version 3 for SMPS (Benning)

Controller Board CB5 3451921B 1 Controller board 2 MB

Switch Mode Power Supply SMPS6 - - Switch mode power supply see separate figure

TSHE Board/HFS 2 Board7 34514210 1 Heater inlet temperature sensor TSHE board for SB version 2

7 34514228 1 HFS 2 board with TSHE for HDF bag

BIC-KV Board8 34560149 1 BIC cartridge holder valve BIC-KV board

HDF Online Power HOP Board9 34519475 1 HDF online power HOP board version 2



10

Rear Door10 3451059A 1 Mains switch

10 34770003 5 Protection cap for mains switch

11b 3451441A 1 Tubing holder/fan cover 11b replaces 11acompatible to crank 12a/12b

12a 34518355 1 Crank for blood pump compatible to tubing holder 11a/11b

12b 34560157 1 Crank for blood pump compatible to tubing holder 11b0

11a

11b

12a

12b



7.7.1 Compatibility Table for BoardsArt. No. Dialog

(Power SupplyAscom/Delta)

Dialog(HDF Online +PowerSupply Ascom/Delta)

Dialog AdvancedSMPS

(Benning)

Dialog+SMPS

(Benning)

Supervisor Communication SC Board Version 2(with SMD potentiometer for volume)

34519416(3810801X)

X X X NA

Power Board 1 Version 2 34519424(3810808X)

X X X X

Power Board 2 Version 2(for piston pumps)

34519432(3810809X)

X X X -

Power Board 2 HDF Version 2(for HDF bag)

34519440(3810813X)

X(HDF bag)

- X(HDF bag)

-

Power Board 2 Version 3(for SAKV-SG)

34514201(3810834X)

- - - X

Power Board 2 HDF Version 3(for HDF bag)

34514236(3810841X)

- - - X(HDF bag)

BIC-KV Board Version 2(for BIC cartridge holder)

34560149(3810811X)

X X X X

HOP Board Version 2(for HDF online)

34519475(3810812X)

- X(HDF online)

X(HDF online)

X(HDF online)

SN Board Version 2 3451945A(3810810X)

X X X X

MSBK Board 3451665A(3810671X)

X X X X

Controller Board 1 MB 3451627E(3810645X)

X - - -

Controller Board 2 MB 3451921B(3810843X)

X(≥ 5.XX)

X X X

Supervisor Board Version 3(for mains power supply Ascom/Delta)

3451499B(38108601)

X X - -

Supervisor Board Version 3(for switch mode power supply SMPS Benning)

3451461A(38108600)

- - X X

• After the replacement of a supervisor or controller board: the LLS or LLC software must be reinstalled if the LLS or LLC software does not match with the software version in the machine. These boards are always delivered withthe latest LLS/LLC software versions!

• You will require the bootloader version 0.07 for the supervisor board for SMPS because the board is delivered with the latest LLS software, e.g. software 8.2X for Dialog+!



7.7.2 Switch Mode Power Supply SMPS (Benning)- 3451474B 1 Switch mode power supply SMPS

version 12see table 7.7.2.1

- 719287B 1 Switch mode power supply SMPSversion 12

refurbished part, see table 7.7.2.1

F1/F2 34570462 10 Fuse T6.25 A (6.3 x 32 mm)

F3/F4 34570160 10 Fuse T3.15 A (TR5)

F5/F6 34771328 10 Fuse F12 A (6.3 x 32 mm) for 230 V

F5/F6 34570187 10 Fuse M20 A (6.3 x 32 mm) for 110/120 V

F301 34570160 10 Fuse T3.15 A (TR5)

F302 34570470 10 Fuse T5 A (TR5)

F303 34570160 10 Fuse T3.15 A (TR5)

F304 34570160 10 Fuse T3.15 A (TR5)

F401 34570160 10 Fuse T3.15 A (TR5)

F402 34570470 10 Fuse T5 A (TR5)

F403 34518819 10 Fuse T1.25 A (TR5)

F600 34570179 10 Fuse M10 A (6.3 x 32 mm)

F601 34570160 10 Fuse T3.15 A (TR5)

F602 34570160 10 Fuse T3.15 A (TR5)

K3/K4 34514775 2 Relay (12 V) for 24 V

C114/C115 34519912 2 Capacitor 1F

H104 34560580 1 Buzzer

- 34560416 10 Plug for buzzer

P7

P8

P101X100

P2

P13

P9

+-P3

P5

P4

P10

P12F401

F402

F403

F303

F304

F6

F3F4

F1 F2

F5

X3X1

X2PE3 N3 L3 N2 L2

PE L N PE L1 N1X1.3 X1.1 X1.2 X1.6 X1.5 X1.4

F302

F301

K4K3

C115

C114

H104

F602

F601

TypeSNTN/PN XXXXXX 11Opt.

Art/KindHzVA



Switch Mode Power Supply SMPS (Benning)

7.7.2.1 Compatibility Table SMPS (Benning)SMPS Type Plate (TN/PN) Dialog Advanced Dialog+

719284(≤ B) (revision ≤ 8) XXXXXX≤8 X -

3451957(C/D)/719284(C/D) (revision 9/10) XXXXXX9/10 X X

34514740(A)/7192878(A) (Revision 11) XXXXXX≥11 X X

3451474B/719287B (Revision 12) XXXXXX≥12 X Xex works

P7

P8

P101X100

P2

P13

P9

+-P3

P5

P4

P10

P12F401

F402

F403

F303

F304

F6

F3F4

F1 F2

F5

X3X1

X2PE3 N3 L3 N2 L2

PE L N PE L1 N1X1.3 X1.1 X1.2 X1.6 X1.5 X1.4

F302

F301

K4 K3

C115

C114

H104

F602

F601

TypeSNTN/PN XXXXXX 11Opt.

Art/KindHzVA



7.8 Front Door1 34516352 1 Pressure sensor see also position 24

2 3457058A 5 Manometer connection (white), for PBS/SN with plastic nut A and

2 3451833A 5 Manometer connection (red), for PA/PBE safety disc B (pay attention to

2 3451884A 5 Manometer connection (blue), for PV correct assembly, see left figure)

3 39971260 m PUR tubing 3.6 x 1.1 for manometer connection (filter)

4 34516409 1 Filter

5 3451432B 1 Heparin pump Compact

5a 34514732 1 Syringe holder

5b 34570640 5 Dummy plug

5c 34570667 1 Clamp

5d 34570659 1 Unlocking lever set

6 34570535 1 Single tubing holder ∅ 6.8 mm

7 34570543 1 Double tubing holder ∅ 6.8 mm

8 34570527 1 Single holder, smallx

9 34570616 5 Latch

10 3451411B 1 Blood pump without roller without light barrier

10 719288B 1 Blood pump without roller refurbished part, without light barrier

11 34516689 1 Roller 8x12 for blood pump

- 7703708 1 Grease SKD 4002 100 g tube (to lubricate the needlebearing of the roller)

12 3451669E 1 Cover for blood pump without hinge pin (see separate figure)

12a 34560025 1 Magnet ∅ 5 mm for cover

12b 34560033 1 Metal disc ∅ 10 mm for cover

13 34519823 2 Hinge pin with interior thread hinge pin

- 7702736 1 Extraction tool for hinge pin with interior thread tool, for hinge pin

14 34516670 1 Seal for blood pump

PV PA PBS/SN PBE

SN SN

PBA PBV

SAD

HP

SAKASAKV-SG

1,2,3,4 5 1,2,3,4

6,7

10,11.12,13,14,15,16

98

6,717

18

1920

21

8

23,22

Pos. 2

AB

5a 5b 5c 5d



Front Door15 34517138 1 Reed sensor with contacts and o-ring 3.68 x 1.7816 34560076 1 Single needle board

17 34570560 1 Single tubing holder ∅ 6 mm

18 3451415A 1 Cover complete

19 3456000A 1 Rotary magnet for SAKA

19 34570578 1 Cover with tubing holder for SAKA

19a 34570675 10 Soft stopper for SAKA, set for 10 rotary magnets, with 20 x 4 mm,10 x 3 mm, replaces o-ring art.. no. 34570624

20 34514107 1 Rotary magnet (currentless closed) for SAKV-SG

20 34514317 1 Cover with tubing holder for SAKV-SG

20a 34570624 9 O-ring 7.0 x 1.5 for SAKV-SG

21 3456005C 1 SAD version 3 withred detector

backwards compatible to version 2If cover for SAD is present: a ball head allen key 2.5/3 is

required for bottom screw behind rotary magnet.

22 34570551 1 Double holder, big

23 34570519 1 Single holder, big

4 41 1 5

4

10,14,1521

1

2019

18

16

4 mm4 mm

3 mm

19a

20a

12

12b

12a



Front Door1 34516352 1 Pressure sensor with cable

24 34514970 1 Pressure sensor to solder in boardsee also position 1

(serial no. 23531-23532,23558-23562and from serial no. 23563)

25 34560297 1 Pressure sensor board (triple) for machine with single pump(3 pressure sensors)

26 34560300 1 Pressure sensor board (fivefold) for machine with double pump(5 pressure sensors)

1 1

1

24

25

24

26



Floppy Disk Drive FDD

Red dot conductor 1Roter Farbpunkt Ader 1

9

12,11,10 2

3

6

5

4

7,8

17.9 Basic Housing

1 3451962A 1 IV pole version 2 height adjustable

2 3451439A 1 Holder, top

3 3451438A 1 Holder, bottom

4 34514716 1 Interference filter/230 V with mains cord,without mains connector

4 34511628 1 Mains cord, without connector 230/240 V

5 34517804 1 Front panel, bottom

6 34514309 1 Base platform

6 34519564 1 Silicone profile

7 34514350 1 Swivel caster

8 34514368 1 Swivel caster with brake

7

8

3451489A

3451490A

1

1

Swivel caster

Swivel caster with brake

(serial no. 23369,23527-23541,23543-23544, 3546, 23552,23555-23565,23568,

23571,23577,23580-23587, 23589-23591,23593,23595, 23599,23601-23602,23605-23606,23614-23615,23631,90402-90404

and from serial no. 23633,90405).

9 34516662 1 Floppy disk drive 3.5"

10 34514147 1 ABPM interface board M2000 for ABPM module 2000see 7.19 for details

11 - - ABPM module M2000 withoutinterface board

replaced by ABPM moduleM2005, see 7.19.2 for details

12 3451487A 1 ABPM module M2005 (integratedinterface board) incl. assembly angle

FW 4.0, see 7.19 for detailsbackwards compatible to

M2000/M1050

- 34514929 1 Loudspeaker

R5

R6

R7

10 11

12



1314

78

12

Basic Housing12 34518029 1 Strain relief

13 34560122 1 Double tubing connector 11xM12 stainless steel, for water inlet

14 34560130 1 Double tubing connector 11xM12 plastic, for dialysate outlet

- 34770852 5 O-ring 11.1 x 1.6

- 34771271 10 Tubing clamp 15/9

- 34515143 m PVC tubing 10 x 3, red per meter (for water inlet)

- 34515151 m PVC tubing 10 x 3, black per meter (for dialysate outlet)

- 39972348 m Silicone tubing 8 x 3.2, red per meterexternal high temperature tubing

- 39224538 1 Single ear clamp 17.5 for external high temperature tubing



7.9.1 Concentrate Suction Rods1 3451726A 1 Feed-through connector

2 39972011 m Silicone tubing 2.9 x 3 per meter (transparent)

3 34517782 5 Disposable filter

4 39972313 m Silicone tubing 5 x 1.5, blue per meter

5 39972305 m Silicone tubing 5 x 1.5, red per meter

6 34514759 1 Male connector (blue) with o-rings

7 34514767 1 Male connector (red) with o-rings

8 34570004 5 O-ring 9.3 x 2.4

9 39971414 m Silicone tubing 3.2 x 1.6 per meter

10 3451728A 1 PE tube 4 x 1 with silicone tubing

2

3

1

45

76

10

98



12

34,5

75,68

9

RVDA

VZ

7.9.2 Rinsing Chambers for Concentrate Suction Rods1 34514120 1 Retainer for suction rod

2 34514767 1 Male connector (red) with o-rings

3 34514759 1 Male connector (blue) with o-rings

4 3451902B 1 Solenoid valve 2/2 way coil straight, connector/flange (AKM)


5 34770852 5 O-ring 11.1 x 1.6



7 3451664B 1 Throttle 1.3 bar for Dialog with HDF online

7 34570683 20 O-ring 4.47 x 1.78


9 34517138 1 Reed sensor with contacts and o-ring 3.68 x 1.78

- 34570306 5 Reducer tubing connector



1 9 2 3

84,55,675,6RVDA

VZ

Rinsing Chambers for Concentrate Suction Rods



7.9.3 Central Concentrate Supply (Option)1 34514678 1 Connection nipple

2 34514597 1 Suction coupling

2 34570438 5 O-ring 8.0 x 1.25

3 39972313 m Silicone tubing 5 x 1.5, blue per meter

4 39239829 m Tubing, white per meter


6 3451728A 1 PE tube 4 x 1 with silicone tubing

7 39971414 m Silicone tubing 3.2 x 1.6 per meter

8 34570004 5 O-ring 9.3 x 2.4

9 34514651 2 Suction nipple with o-rings 9.3 x 2.4

1

2

3

3

54

5

6

789



Central Concentrate Supply (Option)3 39972313 m Silicone tubing 5 x 1.5, blue per meter


3

51

35



VD

Blue

to Dialyser

from Dialyser

Red

1,2 2,3 4 5

67,8

10,9,813,12,11

VDE

7.9.4 Rinsing Bridges7.9.4.1 Rinsing Bridge 3

1 3451445A 1 Dialyser coupling, red

2 34990445 5 O-ring for dialyser coupling

3 3451446A 1 Dialyser coupling, blue

4 34773550 20 Membrane for dialyser coupling

5 39236315 m Silicone tubing 5 x 3 per meter




8 34770852 5 O-ring 11.1 x 1.6

9 34517251 1 Tubing connector ∅ 3.5 x 1/8" stainless steel

10 34517294 1 Suction set with tubing, suction port and black lid for disinfection

10 34514562 1 Suction set with tubing, suction port and yellow lid for disinfection

10 8903409 m PVC tubing 3.5 x 1 for disinfection, per meter

10 34512675 1 Suction port for suction tubing

11 34511792 1 Tubing coupling


13 34771255 20 O-ring 14 x 1.5

14 34773762 10 O-ring 9.25 x 1.78

14



1 2 3 4 5 6

4321

Rinsing Bridge 3- 3451898A 1 Repair kit rinsing bridge for the complete replacement of all

small parts in the disinfection valve

1 34570012 10 O-ring 2.7 x 1.5 for valve tappet

2 34517332 2 Pressure spring for valve tappet

3 3477106A 5 O-ring 6.4 x 1.3 for cover valve tappet

4 34517324 2 Valve tappet for VD

5 34570457 10 O-ring 5.0 x 1.6 for eccecntric shaft

6 3451659D 1 Servomotor with board for VD,servomotor and board must be

exchanged together



VDPDA

VDE

BL

4,5 2,3

16,15,14

16,7,8,9,10,11

Rinsing Bridge 31 3451908C 1 Blood leak detector 3 replaces version 2



3 34770852 5 O-ring 11.1 x 1.6

4 3451657B 1 Pressure sensor

5 34773762 10 O-ring 9.25 x 1.78






11 3451659D 1 Servomotor with board for VD

12 34514490 1 Rinsing bridge 3 housing

13 34516603 1 Fork light barrier for servomotor



16 34771255 20 O-ring 14 x 1.5

17 34773762 10 O-ring 9.25 x 1.78

PDABL

VDE

VD

1 2,3 4,5 6,7,8,9,10,11

1213

17



VD

1,2 2,3 4 5 6 7,8

11,10,814,13,12

VDE

9

BL

Blue

to Dialyser

from Dialyser

Red

7.9.4.2 Rinsing Bridge 4 (Short)1 3451445A 1 Dialyser coupling, red

2 34990445 5 O-ring for dialyser coupling



5 39236315 m Silicone tubing 5 x 3 per meter




8 34770852 5 O-ring 11.1 x 1.6

9 3451908C 1 Blood leak detector 3 replaces version 2

10 34517251 1 Tubing connector ∅ 3.5 x 1/8" stainless steel

11 34517294 1 Suction set with tubing, suction port and black lid for disinfection

11 34514562 1 Suction set with tubing, suction port and yellow lid for disinfection

11 8903409 m PVC tubing 3.5 x 1 for disinfection, per meter

11 34512675 1 Suction port for suction tubing



14 34771255 20 O-ring 14 x 1.5

15 34773762 10 O-ring 9.25 x 1.78

15



61 2 3 4 5

4321

Rinsing Bridge 4- 3451898A 1 Repair kit rinsing bridge for the complete replacement of all

small parts in the disinfection valve






6 3451659D 1 Servomotor with board for VD,servomotor and board must be

exchanged together



Rinsing Bridge 41 3451908C 1 Blood leak detector 3 replaces version 2



3 34770852 5 O-ring 11.1 x 1.6

4 3451657B 1 Pressure sensor

5 34773762 10 O-ring 9.25 x 1.78






11 3451659D 1 Servomotor with board for VD

12 34514627 1 Rinsing bridge 4 housing

13 34516603 1 Fork light barrier for servomotor



16 34771255 20 O-ring 14 x 1.5

17 34773762 10 O-ring 9.25 x 1.78

PDA VD

1 2,3 4,5 6,7,8,9,10,11

1213

VDA

BL

VD PDA VDE

BL

4,5 2,3

16,15,14

16,7,8,9,10,11

17



12

3

7.10 TFT Monitor1 34514260 1 Touch screen for TFT

2 3451491A 1 Front panel complete with membrane

3 34514880 1 Membrane



TFT Monitor4 3451428A 1 Front panel board FPB

5 3451429A 1 Optical status display board OSD

6 34514252 1 Backlight inverter board BIB for Philips TFT

6 34514686 1 Backlight inverter board BIB for Boe Hydis TFT

7 34514643 1 Retrofit kit TFT display(Boe Hydis)

required for replacement of TFT display(Philips) against TFT display

(Boe Hydis/Samsung)

7 3451463B 1 TFT display 15“(Boe Hydis orSamsung)

(serial no. 21358-21359,21362-21363,21365,21367-21368,21370-21374,21378,21381-21382,21384, 21390-

21406,21408-21416,21418,21421,90108-90110 and fromserial no. 21424/90111)

6 34514279 1 Touch controller boardTCB version 1

until serial number 21759/90122 (and 21763..21765,21770..21771, 21774, 21776..21777, 21784, 21797,

21802, 21820, 21822..21825)

6 34514600 1 Touch controller boardTCB version 2

from serial number 21760/90123 (except 21763..21765,21770..21771, 21774, 21776..21777, 21784, 21797,

21802, 21820, 21822..21825)

- 3451419A 1 Low voltage differential signaladapter LVDS

on GX1LCD motherboard(setting for TFT display:

see paragraph 7.6.3)

4

5675 8



7.11 Test and Calibration Equipment and Tools

Inspection for Calibration Equipment# Calibration equipment is subject to inspection and

must be checked and calibrated in regular intervals.# 7701357 1 Manometer 0-4 bar

# 34511571 1 Manometer 2.5 bar

- 770085A 1 Flow meter 1.1 l/min

- 7700911 1 Reference solution (red) for calibration blood leak detector

# 7702493 1 Template 1.4/1.5 for tubing clamp

- 7702655 1 Service board SMPS for switch mode power supply SMPSfor watchdog generation and voltage check of

SMPS

- 34518614 1 Program adapter for memory card

- 7703503 1 Bootloader version0.07

Bootloader for supervisor board for Dialog/DialogAdvanced and Dialog+. Is backward compatible to old

bootloader and replaces art. no. 34518584

# - - Dialysis measurementinstrument HDM 99XPFor example manufacturer:IBP Instruments GmbHInternet: www:ibpmt.com

for temperature, conductivity,flow and pressure measurement

for details contact manufacturer directly

- - - Crossover cable RS 232 for HDM 99 RS 232 interfacefor details contact IBP directly

# - - Secutest SIIIFor example manufacturer:GMC Instruments GroupInternet: www:gmc-instruments.com

for electrical safety checkaccording to EN 60601-1/IEC 601-1

for details contact manufacturerdirectly

- - - Balance (e.g. Pocket Balance)For example manufacturer:Kern & Sohn GmbHInternet: www:kern-sohn.com

for calibration of UFP, BICP and KP

for details contact manufacturerdirectly



Test and Calibration Equipment and Tools- 7701756 1 Extraction tool set (AMP)

# 7701713 1 Calibration weight (10 kg) with marked weight for calibrationof the load cell

# 7701861 1 Graduated cylinder 250 ml

# 7702302 1 Volumetric flask 500 ml for the calibration of the UF pistonpump/HDF option

- 7702310 10 Syringe 1 ml for the calibration of the UF pistonpump only/HDF option

Not for medical use!

- 7702736 1 Extraction tool for hinge pinwith interior thread

for cover without thread (blood pump)

- 770203A 1 Stopcock system with fivestopcocks, incl. lines

for the combined calibration of thepressure sensors (5 x original Perfusor

lines 50 cm

- 8255172 1 Original Perfusor line 50 cm

- 7703090 1 Measurement chamber 500 ml for function test ABPM module

- 7701497 1 Special socket spanner ∅ 18 mm for assembly of MFC socket

- 7107232 1 External MFC/LAN connection cable for network

- 7703589 1 Crossover cable RJ45 for network

- 7703597 1 Coupling (female/female) RJ45 for network

- 7703635 1 Extension cable D-sub 9 pin (male/female) for network

- 7703643 1 Chip card for BSL-Nexadia for network

- 7703473 1 Test plug RS 232 for network

- 7703856 1 Chip card for card reader

- 7703805 1 Male to male connector Adapter to connect both dialysercouplings for the measurement of the

patient leakage current

- 770284A 1 DCI cable, external

- 7703848 1 Assembly jig (motor for piston pump) required for motor assembly



7.12 Service Kits- 3451893C 1 Maintenance kit Dialog/Dialog Advanced/Dialog+

consisting of:6 x Disposable filter for FVD, FB, FK, FBK1, FBK2, FBIC2.1 m Dialyser tubing (silicone tubing 5 x 3)1.1 m Suction tubing for concentrate (Silicone tubing 2.9 x 3)0.95 m Suction tubing (3.5 x 1) for disinfectant compl. with yellowlabelling and suction port6 cm Suction tubing blue for concentrate (silicone tubing 5 x 1.5)6 cm Suction tubing red/white for concentrate (silicone tubing 5 x 1.5)1 x Dust filter for fan rear door1 x Reference solution for blood leak detector2 x O-ring for dialyser couplings2 x Membrane for dialyser couplings2 x O-ring (9.2 x 2.7) for BIC cartridge holder with valve, version 2 (ifoption present)4 x O-ring (9.3 x 2.4) for suction rod2 x O-ring (8 x 1.25) for suction coupling central concentrate supply (ifoption present)

all parts areincluded which

are requiredfor the

exchangeduring a

preventivemaintenance

- 3451897A 1 Repair kit balance chamber for the complete replacement ofboth membranes, incl. all o-ringsand assembly parts (self-locking

nuts, screws, springs etc.)

- 34560513 1 Retrofit kit LAB2 the air separator LAB2 with BICP can beretrofitted for BIC option without

LAB2/BICP (see paragraph 7.17.2.1)

1 34514856 1 Retrofit kit adapter for degassingpump EP:Adapter (position 1)2 x o-ring, 4 x screw M4x20, 8 x spring washer,4 x washer, Assembly instructions

degassing pump EP can beassembled in horizontal position via

adapter 1 (see figure)

- 34560106 1 Repair kit BIC cartridge holder:2 x valve with piercing spike version 2, 1 x swivelarm version 2 and 1 x housing top

for the exchange of:valve with piercing spike version 1,

swivel arm version 1 and housingtop

EP1



7.13 Software- 770722 1 Software update 7.22 5 diskettes for TLC/LLS

update from SW 7.21 to SW 7.22

- 7703651 1 Software 7.22 5 diskettes for TLC/LLS andmemory card for LLC

- 7703724 1 Software 7.52 6 Diskettes for TLC/LLS andmemory card for LLC

- 7703716 1 Patch diskette V7.52 1 diskette for TLC 7.52update from SW 7.51 to SW 7.52

- 7703732 1 Software update 7.52 6 diskettes for TLC/LLSas substitute for defective diskettes

- 770753 1 Software 7.53 6 Diskettes for TLC/LLS andmemory card for LLC

- 7707530 1 Software update 7.53 6 diskettes for TLC/LLSas substitute for defective diskettes

- 770757 1 Software 7.58 USB stick for TLC/LLS, memory card for LLC


- 7707590 1 Software-Update 7.59 USB stick for TLC/LLS


- 7703767 1 USB cable for SW ≥ 7.58

- 7703775 1 USB reset adapter for SW ≥ 7.58

- 7703783 1 BIOS update diskette version 1.8/1.9 for Dialog Advanced/Dialog+

- 7703554 1 CD Remote Bedside Link List ReBeLL version1.5.13

for network

- 7703562 1 CD WAN-BSL firmware version 1.0.4.8 for WAN-BSL only

- 7703821 1 Reactivation diskette bioLogic RR ≥ SW 7.58

- 7703864 1 Field service utility FSU version 2.00 for SW ≥ 7.58



7.13.1 Software Compatibility Table

Software (ex Works) BIOS Dialog DialogAdvanced

DialogAdvanced

Dialog+

POS-460 GX1LCD POS-460 GX1LCD GX1LCD(ex Works)

GX1LCD

Software 3.46 (QNX2) - X - - - - -

Software 3.48 (QNX2) 1.8 - X - - - -

Software 5.35 (QNX2) - - - X - - -

Software 5.36 (QNX2) 1.8 - - - X - -

Software 6.XX (QNX4) 1.8 - - - - X -

Software 7.21 to 7.52 (QNX4) 1.8/1.9 - - - - - X

Software Update 7.53 (Linux)Diskettes with TLC/LLS SW only

if SW 7.52 is present

1.8/1.9 - - - - - X

Software 7.58 (Linux) 1.8/1.9 - - - - - X

Software 7.59 (Linux) 1.9 - - - - - X

Software Update 7.59 (Linux)USB Stick with TLC/LLS SW only

if SW 7.52 is present

1.9 - - - - - X

Software ≥ 8.20 (Linux) 1.9 - - - - - X



7.14 Miscellaneous- 3784 0053 m Tubing 12 x 2 (RAL 9001) per meter

Note: See also chapter 6 (Tubing Diagrams) - 3784 0096 m Silicone tubing 8 x 2 per meter

- 39972100 m Silicone tubing 6 x 3 per meter

- 39971007 m Silicone tubing 6 x 1.75, red per meter, internal high temperature tubing

- 39238032 1 Single ear clamp 13.3 for internal high temperature tubing

- 39972348 m Silicone tubing 8 x 3.2, red per meter, external high temperature tubing

- 39224538 1 Single ear clamp 17.5 for external high temperature tubing

- 39972321 m Reinforced tubing 6 x 1.75 per meter

- 39236315 m Silicone tubing 5 x 3 per meter

- 39972313 m Silicone tubing 5 x 1.5, blue per meter

- 39972305 m Silicone tubing 5 x 1.5, red per meter

- 39971260 m PUR tubing 3.6 x 1.1 per meter

- 8903409 m PVC tubing 3.5 x 1 per meter

- 39972011 m Silicone tubing 2.9 x 3 per meter

- 39971414 m Silicone tubing 3.2 1.6 per meter

- 39972445 m Silicone tubing 2 x 3, transparent per meter

- 39971210 m Silicone tubing 2 x 1.5 per meter

- 34515143 m PVC tubing 10 x 3, red per meter

- 34515151 m PVC tubing 10 x 3, black per meter

- 39239829 m Tubing, white per meter



- 34570365 20 Tubing clamp SNP-6 ∅ 11.4-13 mm plastic

- 34517766 10 Canister lid, red with retainer for suction rod

- 34517774 10 Canister lid, blue with retainer for suction rod

- 3399 0492 m Spiral band per meter

- 34773770 5 Y-Tubing connector 6 mm

- 39237648 1 Y-Tubing connector 8 mm

A BxA x B Tubing



Miscellaneous- 3950 8013 1 Threaded insert M4 a drill ∅ 5.7 mm is required for the threaded insert M4

Note: Do not exceed max. drilling depth 11 mm +0.1(see left figure)

- 7703619 1 Touch-up pen pale green

- 7703627 1 Touch-up pen light grey

- 7702345 1 Silicone grease 410

- 7702353 1 Silicone rubber adhesive (white) RTV 162

- 7702388 1 Silicone rubber adhesive (transparent) RTV 118

- 34501207 1 Screw locking paint (yellow)

- 3922 7146 1 Teflon tape

- 7702809 1 Terminal grease 50 ml

1 34570322 10 Grounding for sub-racks d consisting of:screw a, terminal b, tooth lock washer c,washer e, spring washer f, nut g

pay attention to correctassembly sequence!

- 7703708 1 Grease SKD 4002 100 g tube(to lubricate the needle bearing of the roller)

11

60 o

1 +0.15.7+0.1

a1

bcdefg



1

234

5

67

8

3

9

1011

127.15 HDF (Option)

1 3451740A 1 Load cell

2 34514406 1 Membrane keyboard

3 34517413 1 Microswitch without spring lever

3 3313 2658 1 Spring lever

4 3451759A 1 Substitution air detector (SUBAD)

4 34560378 1 Substitution air detector (SUBAD) V2 not backward compatible

5 3451744A 1 Trapezoid thread nut

6 3451877A 1 Air detector board (ADB) if SLB is present

6 34517839 1 Substitution supervisor board 2 (SSB 2) backwards compatible(if SLB is not present)

7 34517375 1 Shaft adapter

8 34517456 1 DC gear motor

9 3451736B 1 Substitution drive board 2 (SAB2)

10 34570314 5 Single tubing holder (black)

10 34774106 10 Thread forming screw 50 x 8

11 34518673 1 Clamp

12 3451876B 1 Single load cell board (SLB)



7.15.1 Flow Detector1 34770925 5 Plug not upwards compatible to pos. 6,

because longer plug

2 34770852 5 O-ring 11.1 x 1.6


4 34772928 3 Centre disc not upwards compatible to pos. 7,because shorter centre disc

5 34771085 5 Seal

6 34514937 1 Plug not backwards compatible to pos. 1,because shorter plug

7 34514945 1 Centre disc not backwards compatible to pos. 4,because higher centre disc

8 3451787A 1 HFD board

123

45

623

57

86



7.15.2 UF Piston Pump1 3451789D 1 Piston pump (HDF bag option) one-way bearing not necessary

7.15.3 HFS Board2 34514228 1 HFS 2 board with TSHE

PowerBoard 2

PowerBoard 1

Supervisor Board

2HFSBoard

1



7.16 Staff Call (Option)1 34517685 1 Staff call board

DYN AUS

STAT (Default)DYN

1



1

2 2

2

3

9

4 5 6

6

7

7

8

7.17 Bicarbonate Cartridge Holder with Valve (Option)7.17.1 BIC Cartridge Holder with Valve

1 3451439A 1 Holder, top

2 3451953A 1 Valve with piercing spike version 1complete with o-ring

not upward compatible

2 34560084 1 Valve with piercing spike version 2complete with o-ring

not backward compatiblebatch no. ≥ 019-05-01 on valve housing

batch no. 1489-04 on valve housingor 07—05-N or 08-05-N on valve bottom

3 3451437A 1 Housing, top incl. thread forming screws 22 x 12

4 34514422 1 Cover for top housing incl. thread forming screws 22 x 12

5 34519866 1 Slide ring

6 34519548 1 Swivel arm version 1 not upward compatiblefor valve with piercing spike version 1 only

6 34560092 1 Swivel arm version 2 not backward compatiblefor valve with piercing spike version 2 only

7 34570594 10 O-ring 9.2 x 2.7

7 34570241 5 O-ring 9.19 x 2.62 alternative

8 34570420 5 Pressure spring

9 34514430 1 Housing, bottom incl. thread forming screws 22 x 12

10 34514449 1 Cover for bottom housing incl. thread forming screws 22 x 12

11 34517138 1 Reed sensor with contacts and o-ring3.68 x 1.78

bottom BIC cartridge holder

- 34517782 5 Disposable filter filter FBIC

2

10

11

Pos. 6Version 1 Version 2

19.7mm



7.17.2 Air Separator LAB2/Valve VBICP and Valve VVB1 3451906B 1 Solenoid valve 2/2 way coil straight, connector/connector (AKM)

2 34770852 5 O-ring 11.1 x 1.6


3 34570233 5 O-ring 26.64 x 2.62


BICP

KP

UFP

ENDLF

BICLF

RVB

RVK

FPE

RVFPE

VVB

VBICP

LAB2

1,2 3 2,4



7.17.2.1 Valve VBICP and VVB (without *Air Separator LAB2)1 3451906B 1 Solenoid valve 2/2 way coil straight, connector/connector (AKM)

* Air separator LAB2 was replaced by Y piece. Air separator LAB2/VBICP can be retrofitted with the retrofit kit LAB2

2 34770852 5 O-ring 11.1 x 1.6

- 34560513 1 Retrofit kit LAB2 retrofit kit consists of:• LAB2• VBICP• Tubing• Assembly instructionsBICP

KP

UFP

ENDLF

BICLF

RVB

RVK

FPE

RVFPE

VVBVBICP

1,2 1,2



LAB1

VBKOVBKS

VBKSDBK

DBK7 8

4

4

1,2

1,2

5

6

2,3

2,3

7.17.3 Air Separator LAB1, Throttle DBK and Valve VBKO/VBKS1 3477103A 2 Tubing connector ∅ 3.5 x 1/8" plastic

2 34770852 5 O-ring 11.1 x 1.6


4 34770925 5 Plug

5 34770852 5 O-ring 11.1 x 1.6


7 34771352 3 Centre disc






7.17.4 BIC Cartridge Holder Boards1 34560149 1 BIC-KV board

2 34514228 1 HFS 2 board with TSHE

2

1

PowerBoard 2

PowerBoard 1

Supervisor Board

HFSBoard

BIC-KVBoard



7.18 HDF Online (Option)1 - - Substitution port see separate figure

- - - UF sub-rack see separate figure

PV PA PBS/SN PBE

SN SN

PBA PBV

SAD

HP

SAKASAKV-SG

1



7.18.1 Substitution Port1 3451448A 1 Substitution port complete

2 34570349 5 Pressure spring ∅ 4.6 x 14 mm

3 3457035A 2 Quadring 12.37 x 2.62 incl. spacer

4 34560017 1 Substitution connector stainless steel, without o-ring

5 3477106A 5 O-ring 6.4 x 1.3


1

4,53

2

6

4,5

6

A or A+B (A=Quadring; B=Spacer)

AB

AB



VDA

VSAAVSAEVEBK1

VEBK2

VABK2 VDABK1

FPA

RVFPA

LA

VDFFVLA

DDE

MSBK2

MSBK1

HFB

VBE

VBP

VSB

VABK1

VDEBK2

VDEBK1

3

1,2

3

4

3

1,2

7.18.2 UF Sub-Rack HDF Online1 3451906B 1 Solenoid valve 2/2 way manuf. AKM only, coil straight,

connector/connector

2 34770852 5 O-ring 11.1 x 1.6

3 3451902B 1 Solenoid valve 2/2 way manuf. AKM only, coil straight, connector/flange

4 - - Valve block see separate figure



VBE

HFB

VSB

VBP

1

2

3

7.18.3 Valve Block HDF Online1 39237591 1 Hydrophobe filter

2 34519009 1 Solenoid valve 3/2 way



VBEHFB

VSB

VBP

2

4

1



7.18.4 Boards HDF Online1 34519475 1 HOP board version 2

2 34514201 1 Power board 2 version 3

3 34519114 1 HOA board

HOPBoard

BIC-KVBoard

HOABoard

PowerBoard 2

PowerBoard 1

Supervisor Board

Controller Board

Switch Mode Power SupplySMPS

2

1

3



3

3

7.18.5 DF/HDF Filter Holder HDF Online1 - - Filter holder complete

version 1filter holder version 1 can be replaced by

a pair of filter holders version 2(see version 2)


3 34570632 10 O-ring 12.1 x 2.7

2

1

1

2

2



DF/HDF Filter Holder HDF Online1 34560041 1 Filter holder complete version 2 also see filter holder version 1


3 3451445A 1 Dialyser coupling, red


3 34990445 5 O-ring


1

2

2

3

3

3

Red/Rot

Red/Rot

Blue/Blau

Blue/Blau

Red/RotBlue/Blau



7.19 Automatic Blood Pressure Measurement ABPM (Option)7.19.1 Automatic Blood Pressure Measurement ABPM Module M2000

1 34514147 1 ABPM interface board M2000

2 - - ABPM module M2000 withoutinterface board

replaced by ABPM moduleM2005, see 7.19.2 for details

- 34518517 1 Coupling (ABPM) for pressure tubing

R5

R6

R7

1 2



7.19.1.1 Compatibility Table ABPM Module M2000

ABPM Module Motherboard(Factory Setting)

M2000 Dialog/Dialog Advanced

POS-460

Dialog+

GX1LCD34514147 (ABPM interface board M2000) X *- *X

* The factory setting of the interface board isfor the GX1LCD motherboard.

GX1LCD Motherboard (Factory Setting):R5/R6/R7 are assembled.

POS-460 Motherboard:Unsolder R5/R6/R7 (zero ohm resistors) and solder theseresistors in position R2/R3/R4 for POS-460 motherboard.

R2

R3

R4

R5

R6

R7

ABPM InterfaceBoard M2000



7.19.2 Automatic Blood Pressure Measurement ABPM Module M20051 3451487A 1 ABPM module M2005 (integrated

interface board) incl. assemblyangle

FW 4.0, backwards compatible toM2000/M1050

firmware version of ABPMmodule on sticker:Version C (FW):X.X

1

P2P1Version CX.X



7.19.2.1 Compatibility Table ABPM Module M2005

P1P2

DIL1 2 43 5 61

1ON

DIL Switch: Default GX1LCD (ex Works)

OFF

DIL Switch

Position of DIL Switches for POS-460 Motherboard

Position of DIL Switches for GX1LCD Motherboard

1 2 43 5 6ON

OFF

1 2 43 5 6ON

OFF

DIL Switch1 3 52 4 6

POS-460 ON ON

ON

OFF

OFF

OFF

GX1LCD(default) O

N

ON ON

OFF

OFF OFF



1

7.20 Battery (Option)The battery (rechargeable) contains diluted sulfric acid, a very toxic substance.If the battery leaks and the liquid inside spills on the skin or clothing,immediately wash it off with plenty of clean water.

If the liquid splashes into the eyes, immediately flush the eyes with plenty ofclean water and consult a doctor. Sulfric acid in the eyes may cause loss ofeyesight and acid on the skin will cause burns.

Pay attention to the included documentation of the battery supplier!

1 - - Battery sub-rack see separate figure



SMPSP3

blue/blau

green/yellowgrün/gelb

brown/braun

blue/blaublue/blau

brownbraun

brownbraun

brownbraun

green/yellowgrün/gelb

1

1

7.20.1 Battery Sub-RackIf a battery must be replaced exchange the complete battery set!

Prevent shorts in the battery compartment during disassembly and assembly:Please pay attention to the correct assembly/disassembly sequence during theconnection and disconnection of the battery.Connection:Connect the (+) terminal then the (-) terminal. Then connect the ground leadto the compartment plate.Disconnection:Disconnect the (-) terminal and the ground lead and then the (+) terminal.

1 34519599 1 Battery (rechargeable) set12 V/17 Ah, incl. cable ties

2 x battery (rechargeable) 12 V/17 Ahprior to assembly: slightly grease the

battery terminals with terminal grease

- 7702809 1 Terminal grease 50 ml



7.21 Nexadia -BSL/WAN-BSL (Option)1 34514554 1 Bedside link board (BSL board) without firmware

1

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 78Art. No. Qty. Description


7.22 Card Reader (Option)1 34560548 1 Card reader board

1

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 79Art. No. Qty. Description


7.23 Spare Parts List Alphabetical Order

Please note that the spare parts have been listed using a nomenclaturehierarchy structure, because the common approach for searching aspecific spare part would be in a structured way.

How to search and find a specific spare part

Some examples:

Controller board 2 MB

Search for the keyword board and look for controller to find the wantedspare part number.

3451921B 1 Board, controller, 2 MB

Solenoid valve

Search for the keyword valve and look for solenoid to find the requiredspare part number.

3451902B

3451906B

34560270

1

1

1

Solenoid valve 2/2 way



Spare Parts List as PDF File

You can easily search and find in PDF files using the Adobe Reader (clickon right mouse button: Search).

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 80

Spare Parts List Alphabetical OrderArt. No. Qty. Description


3451419A 1 Adapter, low voltage differential signal, LVDS

34518614 1 Adapter, program for memory card

34517375 1 Adapter, shaft

7703775 1 Adapter, USB reset

7702388 1 Adhesive, silicone rubber, (transparent) RTV 118

7702353 1 Adhesive, silicone rubber, (white) RTV 162

34519548 1 Arm, swivel, version 1

34560092 1 Arm, swivel, version 2

34560246 1 Ball, float, incl. o-ring

3399 0492 m Band, spiral

34519599 1 Battery (rechargeable) set 12 V/17 Ah, incl. cable ties

34519327 1 Battery BR2032, 3V

34514147 1 Board, ABPM interface, M2000

3451877A 1 Board, air detector, (ADB)

34514686 1 Board, backlight inverter, BIB for Boe Hydis TFT

34514252 1 Board, backlight inverter, BIB for Philips TFT

34514554 1 Board, bedside link, (BSL board)

34560149 1 Board, BIC-KV

34560548 1 Board, card reader

3451921B 1 Board, controller, 2 MB

3451428A 1 Board, front panel, FPB

34519475 1 Board, HDF online power HOP, version 2

3451787A 1 Board, HFD

34514228 1 Board, HFS 2, with TSHE

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 81



34519114 1 Board, HOA

34519475 1 Board, HOP, version 2

3451665A 1 Board, membrane position sensor

3451429A 1 Board, optical status display, OSD

34519424 1 Board, power, 1 version 2



34560297 1 Board, pressure sensor, (triple)

34560300 1 Board, pressure sensor, (fivefold)

7702655 1 Board, service, SMPS

3451876B 1 Board, single load cell, (SLB)

34560076 1 Board, single needle

34517685 1 Board, staff call

3451736B 1 Board, substitution drive, 2 (SAB2)

34517839 1 Board, substitution supervisor, 2 (SSB 2)

3451461A 1 Board, supervisor, version 3

34514600 1 Board, touch controller, TCB version 2

34560602 1 Body, pump, for piston pump

7703503 1 Bootloader version 0.07

34514490 1 Bridge, rinsing, 3 housing

34514627 1 Bridge, rinsing, 4 housing

34560580 1 Buzzer

7703589 1 Cable, crossover, RJ45

770284A 1 Cable, DCI, external

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 82



7703635 1 Cable, extension, D-sub 9 pin (male/female)

7107232 1 Cable, external MFC/LAN connection

34560238 1 Cable, ground, compl., (TLC sub-rack)

7703767 1 Cable, USB

39410625 1 Cap ∅ 44 mm

34770003 5 Cap, protection, for mains switch

34519912 2 Capacitor 1F

7703643 1 Card, chip, for BSL-Nexadia

7703856 1 Card, chip, for card reader

34514350 1 Caster, swivel

3451489A 1 Caster, swivel

34514368 1 Caster, swivel, with brake

3451490A 1 Caster, swivel, with brake

3451740A 1 Cell, load

7703090 1 Chamber, measurement, 500 ml

34518673 1 Clamp

34570667 1 Clamp

39238032 1 Clamp, single ear, 13.3

39224538 1 Clamp, single ear, 17.5

34771271 10 Clamp, tubing, 15/9

34570195 20 Clamp, tubing, SNP-1.5 ∅ 7-8 mm

34570209 20 Clamp, tubing, SNP-4 ∅ 10-11 mm

34570365 20 Clamp, tubing, SNP-6 ∅ 11.4-13 mm

34519092 1 Coil

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 83



3451884A 5 Connection, manometer, (blue)

3451833A 5 Connection, manometer, (red)

3457058A 5 Connection, manometer, (white)

3451726A 1 Connector, feed-through

7703805 1 Connector, male to male

34514759 1 Connector, male, (blue) with o-rings

34514767 1 Connector, male, (red) with o-rings

34514961 5 Connector, reducer tubing

34570306 5 Connector, reducer tubing

34560017 1 Connector, substitution (stainless steel)

34560130 1 Connector, double tubing, 11xM12, plastic

34560122 1 Connector, double tubing, 11xM12, stainless steel

3477103A 2 Connector, tubing, ∅ 3.5 x 1/8"

34517251 1 Connector, tubing, ∅ 3.5 x 1/8"

3477084A 5 Connector, tubing, ∅ 7 x 1/8"

34517243 1 Connector, tubing, ∅ 7 x 1/8"

3451916A 5 Connector, tubing, ∅ 8 x 1/8"

34773770 5 Connector, Y-tubing, 6mm

39237648 1 Connector, Y-tubing, 8mm

34511628 1 Cord, mains, without connector 230/240 V

34518517 1 Coupling (ABPM)

7703597 1 Coupling (female/female) RJ45

3451445A 1 Coupling, dialyser, red

34514597 1 Coupling, suction

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 84



34511792 1 Coupling, tubing

3451415A 1 Cover complete

3451669E 1 Cover for blood pump

34514449 1 Cover for bottom housing

34514422 1 Cover for top housing

34560424 1 Cover, internal, rear door

34570578 1 Cover with tubing holder

34514317 1 Cover with tubing holder

34518355 1 Crank for blood pump

34560157 1 Crank for blood pump

34519378 1 Cylinder for heater element

34511342 1 Cylinder, glass

7701861 1 Cylinder, graduated, 250 ml

3451908C 1 Detector, blood leak, 3

3451759A 1 Detector, substitution air, (SUBAD)

34560378 1 Detector, substitution air, (SUBAD), V2

34514945 1 Disc, centre



34560033 1 Disc, metal, ∅ 10 mm

7703783 1 Diskette, BIOS update, version 1.8/1.9

7703716 1 Diskette, patch V7.52

7703821 1 Diskette, reactivation, bioLogic RR ≥ SW 7.58

3451463B 1 Display, 15”, TFT, (Boe Hydis or Samsung)

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 85



34516662 1 Drive, floppy disk, 3.5"

3451458A 1 Drive, hard disk, 40 GB

34560564 1 Elbow, plastic, for piston pump

34517610 1 Fan 80 x 80 mm with connector

34516409 1 Filter

34517782 5 Filter, disposable

34570284 5 Filter, dust

39237591 1 Filter, hydrophobe

34514716 1 Filter, interference, /230 V with mains cord, without mainsconnector

7703562 1 Firmware, CD WAN-BSL, version 1.0.4.8

7702302 1 Flask, volumetric, 500 ml

770085A 1 Flow meter 1.1 l/min

34518819 10 Fuse T1.25 A (TR5)

34570160 10 Fuse T3.15 A (TR5)

34570470 10 Fuse T5 A (TR5)

34570462 10 Fuse T6.25 A (6.3 x 32 mm)

34570179 10 Fuse M10 A (6.3 x 32 mm)

34771328 10 Fuse F12 A (6.3 x 32 mm)

34570187 10 Fuse M20 A (6.3 x 32 mm)

7702345 1 Grease, silicone, 410

7703708 1 Grease SKD 4002

7702809 1 Grease, terminal, 50 ml

34570322 10 Grounding for sub-racks

34511547 1 Heat exchanger (option)

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 86



3451969B 1 Heater element 120V / 1800 W

34519580 1 Heater element 240V / 1800 W

34519823 2 Hinge pin with interior thread

3451438A 1 Holder, bottom

34570551 1 Holder, double, big

34570543 1 Holder, double tubing

34560041 1 Holder, filter, version 2, complete

34570519 1 Holder, single, big

34570535 1 Holder, single tubing

34570560 1 Holder, single tubing

34570314 5 Holder, single tubing (black)

34570527 1 Holder, single, small

34514732 1 Holder, syringe

3451439A 1 Holder, top

3451441A 1 Holder, tubing, fan cover

3456018A 1 Housing with lid (air separator)

34514430 1 Housing, bottom

3451437A 1 Housing, top

3950 8013 1 Insert, threaded, M4

7703848 1 Jig, assembly, (motor piston pump)

34560572 1 Joint, bell, for piston pump

34514406 1 Keyboard, membrane

3451893C 1 Kit, maintenance, Dialog/Dialog Advanced/Dialog+

3451897A 1 Kit, repair, balance chamber

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 87



34560106 1 Kit, repair, BIC cartridge holder

3451898A 1 Kit, repair, rinsing bridge

34514856 1 Kit, retrofit, adapter for degassing pump EP

34560513 1 Kit, retrofit, LAB2

34514643 1 Kit, retrofit, TFT display (Boe Hydis)

34570616 5 Latch

3313 2658 1 Lever, spring

34570659 1 Lever, unlocking, set

34560190 1 Lid (air separator)

34517774 10 Lid, canister, blue

34517766 10 Lid, canister, red

34516603 1 Light barrier, fork, for servomotor

34514929 1 Loudspeaker

34560025 1 Magnet

3456000A 1 Magnet, rotary

34514107 1 Magnet, rotary, (currentless closed)

3451416B 1 Manifold, DF distribution, (preassembled)

7701357 1 Manometer 0-4 bar

34511571 1 Manometer 2.5 bar

34514880 1 Membrane

3451615A 2 Membrane for balance chamber

34773550 20 Membrane for dialyser coupling

34517413 1 Microswitch without spring lever

3451487A 1 Module, ABPM, M2005 (integrated interface board)

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 88



34514791 1 Module, SODIM, 64 MB

3451404A 1 Motherboard GX1LCD

3451663A 1 Motor

34517456 1 Motor, DC gear

34560556 1 Motor for piston pump

3451659D 1 Motor, servo, with board

34514678 1 Nipple, connection

34514651 2 Nipple, suction, with o-rings 9.3 x 2.4

3451744A 1 Nut, trapezoid thread

8255172 1 Original Perfusor line 50 cm

34990445 5 O-ring

34570012 10 O-ring 2.7 x 1.5

34771140 20 O-ring 3.1 x 1.6

34771166 20 O-ring 3.68 x 1.78

34570683 20 O-ring 4.47 x 1.78

34570457 10 O-ring 5.0 x 1.6

3477106A 5 O-ring 6.4 x 1.3

34570624 9 O-ring 7.0 x 1.5

34570438 5 O-ring 8.0 x 1.25

34770950 20 O-ring 8.0 x 1.6

3477104A 10 O-ring 8.3 x 2.4

34570241 5 O-ring 9.19 x 2.62

34570594 10 O-ring 9.2 x 2.7

34773762 10 O-ring 9.25 x 1.78

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 89



34570004 5 O-ring 9.3 x 2.4

34770852 5 O-ring 11.1 x 1.6

34570632 10 O-ring 12.1 x 2.7

34771255 20 O-ring 14 x 1.5

34770976 10 O-ring 15.6 x 1.78

34570233 5 O-ring 26.64 x 2.62

34501207 1 Paint, screw locking, (yellow)

34517804 1 Panel, front, bottom

3451491A 1 Panel, front, compl. with membrane

7703627 1 Pen, touch-up, light grey

7703619 1 Pen, touch-up, pale green

34514309 1 Platform, base

34514937 1 Plug

34770925 5 Plug

34570373 10 Plug (long)

34570381 10 Plug (short)

34560416 10 Plug for buzzer

34570640 5 Plug, dummy

7703473 1 Plug, test, RS 232

3451962A 1 Pole, IV, version 2

3451448A 1 Port, substitution, complete

34512675 1 Port, suction

3451474B 1 Power supply, switch mode, SMPS, version 12

719287B 1 Power supply, switch mode, SMPS, version 12

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 90



34519564 1 Profile, silicone

3451411B 1 Pump, blood, without roller

719288B 1 Pump, blood, without roller

34515330 1 Pump, gear, (Micropump version 1) with magnet, without motor

34560319 1 Pump, gear, (Micropump version 2) with magnet, without motor

3451432B 1 Pump, heparin, Compact

3451749E 1 Pump, piston

3451789D 1 Pump, piston, (HDF bag option)

3457035A 2 Quadring 12.37 x 2.62 incl. spacer

34514953 1 Reducer

34514775 1 Relay (12 V)

34518029 1 Relief, strain

34514120 1 Retainer for suction rod

34519866 1 Ring, slide

34516689 1 Roller 8x12 for blood pump

3456005C 1 SAD version 3 with red detector

34774106 10 Screw, thread forming, 50 x 8

34771158 2 Seal

34771085 5 Seal

34516670 1 Seal for blood pump

34516018 1 Seal for heater element

3451611B 1 Sensor, bicarbonate conductivity,

3451610B 1 Sensor, END conductivity

34514210 1 Sensor, heater inlet temperature, TSHE board

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 91



3451604B 1 Sensor, level, complete

34514970 1 Sensor, pressure

34516352 1 Sensor, pressure

3451657B 1 Sensor, pressure

34516131 1 Sensor, pressure - 660 mbar

34517138 1 Sensor, reed, with contacts and o-ring 3.68 x 1.78

34519246 1 Sensor, reed, complete

3451614B 1 Sensor, temperature

34517294 1 Set, suction, with tubing, suction port and black lid

34514562 1 Set, suction, with tubing, suction port and yellow lid

34513540 1 Sieve disc

7703651 1 Software 7.22

7703724 1 Software 7.52

770753 1 Software 7.53

770759 1 Software 7.59

770824 1 Software 8.24

770722 1 Software update 7.22




7703554 1 Software, CD Remote Bedside Link List ReBeLL version 1.5.13

7700911 1 Solution, reference, (red)

7701497 1 Spanner, special socket, ∅ 18 mm

34517332 2 Spring, pressure

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 92



34570420 5 Spring, pressure

34570349 5 Spring, pressure ∅ 4.6 x 14 mm

34771093 10 Spring, pressure 100 mmHg



770203A 1 Stopcock system with five stopcocks, incl. lines

34570675 10 Stopper, soft

3451059A 1 Switch, mains

7702310 10 Syringe 1 ml

34560165 1 Tank, upline, with lid

3922 7146 1 Tape, teflon

34517324 2 Tappet, valve

7702493 1 Template 1.4/1.5

34516069 1 Throttle 0 - 4 bar

3451727B 1 Throttle 0.4 bar

3451664B 1 Throttle 1.3 bar

7702736 1 Tool, extraction, for hinge pin with interior thread

7701756 1 Tool, extraction, set (AMP)

34514260 1 Touch screen for TFT

3451728A 1 Tube, PE, 4 x 1

3784 0053 m Tubing 12 x 2 (RAL 9001)

39972321 m Tubing, reinforced, 6 x 1.75

39971260 m Tubing, PUR, 3.6 x 1.1

34515151 m Tubing, PVC, 10 x 3, black

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 93



34515143 m Tubing, PVC, 10 x 3, red

8903409 m Tubing, PVC, 3.5 x 1

39972445 m Tubing, silicone, transparent, 2 x 3

39236315 m Tubing, silicone, 5 x 3

39972100 m Tubing, silicone, 6 x 3

3784 0096 m Tubing, silicone, 8 x 2

39971007 m Tubing, silicone, 6 x 1.75, red

39972011 m Tubing, silicone, 3.3 x 2.85


39971210 m Tubing, silicone, 2 x 1.5

39972313 m Tubing, silicone, 5 x 1.5, blue


39971414 m Tubing, silicone, 3.2 x 1.6

39239829 m Tubing, white

7703864 1 Utility, field service, FSU version 2.00

3451953A 1 Valve with piercing spike version 1 complete with o-ring

34560084 1 Valve with piercing spike version 2 complete with o-ring

34516123 1 Valve, proportional control

34514988 1 Valve, return

3451906B 1 Valve, solenoid, 2/2 way

3451902B 1 Valve, solenoid, 2/2 way

34560270 1 Valve, solenoid, 2/2 way

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 94



34519009 1 Valve, solenoid, 3/2 way

7701713 1 Weight, calibration, (10 kg)

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 95

Page Pos. Old Art. No. Description New Art. No. Description Cause of Change/Modification


7.24 Changes/Modifications in Spare Parts List

All changes and modifications are listed since the last edition of thisspare parts list (from edition 2-2005/edition date 2006-10-11 to edition3-2008/edition date 2008-06-02).

7-2 - - - - - Supplemented Material Return Form (cleaningand disinfection of spare parts)

7-9 1a - - 34560270 Solenoid valve 2/2 way new art. no.

7-10 1 - - 34560270 Solenoid valve 2/2 way new art. no.

7-10 4 34771000 O-ring 5.0 x 1.5 34570683 O-ring 4.47 x 1.78 new art. no.

7-10 5 3451969A Heater element 120 V/1800 W 3451969B Heater element 120 V/1800 W new art. no.

7-12 16 3451413A Gear pump (Gather) with magnet,without motor

34560319 Gear pump (Micropump version 2)with magnet, without motor

new art. no. (Micropump version 2 replacesGather pump, for degassing pump EP only)

7-14 14 3451604A Level sensor complete with floatball

3451604B Level sensor complete new art. no./modified purchase text


- - obsolete

7-16 1 719289A Gear pump (Gather) withoutmagnet, without motor

- - obsolete

7-16 1 34515330 Gear pump (Micropump) withmagnet, without motor

- Gear pump (Micropump version 1)with magnet, without motor

modified purchase text (Micropump version 1for FPE/FPA only)

7-16 4 3451610A END conductivity sensor 3451610B END conductivity sensor new art. no.

7-16 5 3451611A Bicarbonate conductivity sensor 3451611B Bicarbonate conductivity sensor new art. no.

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 96




7-18 1 3451749C Piston pump 3451749E Piston pump new art. no.

7-18 2 3451789C UFP piston pump (HDF option) 3451789D Piston pump (HDF bag option) new art. no./modified purchase text

7-18 5 - - 34560556 Motor for piston pump new art. no.

7-18 6 - - 34560572 Bell joint for piston pump new art. no.

7-18 7 - - 34560602 Pump body for piston pump new art. no.

7-18 8 - - 34560564 Plastic elbow for piston pump new art. no.

7-18 - - - 7703848 Assembly jig (motor piston pump) new art. no.

7-20 3 34516654 Membrane position sensor board 3451665A Membrane position sensor board new art. no./exchange as pair only



- - obsolete

7-21 4 34515330 Gear pump (Micropump) withmagnet, without motor

- Gear pump (Micropump version 1)with magnet, without motor

modified purchase text (Micropump version 1for FPE/FPA only)


7-21 10 34560181 Housing with lid (air separator) 3456018A Housing with lid (air separator) new art. no.

7-22 1 34514589 Hard disk drive 40 GB 3451458A Hard disk drive 40 GB new art. no.

7-22 3 34514198 Low voltage differential signaladapter LVDS

3451419A Low voltage differential signaladapter LVDS

new art. no.

7-23 1 34514589 Hard disk drive 40 GB 3451458A Hard disk drive 40 GB new art. no.

7-23 3 34514198 Low voltage differential signaladapter LVDS


new art. no.

7-24 - - - - - new paragraph (setting for LVDS adapter)

7-25 - 34519726 Internal cover rear door 34560424 Internal cover rear door new art. no.

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 97



7-28 - 34514740 Switch mode power supply SMPS 3451474B Switch mode power supply SMPSversion 12

new art. no.

7-28 - 7192878 Switch mode power supply SMPS 719287B Switch mode power supply SMPSversion 12

new art. no.

7-28 F600 34570179 Fuse M10 A (TR5) - Fuse M10 A (6.3 x 32 mm) modified purchase text

7-28 K3/K4 34514775 Relay (24 V) - Relay (12 V) modified purchase text

7-28 H104 34503447 Buzzer 34560580 Buzzer new art. no.

7-28 - - - 34560416 Plug for buzzer new art. no.

7-29 - - - 3451474B Switch mode power supply SMPSversion 12

new art. no.

7-29 - - - 719287B Switch mode power supply SMPSversion 12

new art. no.

7-30 5 3451432A Heparin pump Compact 3451432B Heparin pump Compact new art. no.

7-30 5b - - 34570640 Dummy plug new art. no.

7-30 5c - - 34570667 Clamp new art. no.

7-30 5d - - 34570659 Unlocking lever set new art. no.

7-31 19 34560009 Rotary magnet complete 3456000A Rotary magnet new art. no./modified purchase text

7-31 19a - - 34570675 Soft stopper new art. no. (replaces o-ring art. no.34570624)

7-31 21 3456005B SAD version 3 with red detector 3456005C SAD version 3 with red detector new art. no.

7-32 1 34516352 Pressure sensor - - new on page

7-32 25 - - 34560297 Pressure sensor board (triple) new art. no.

7-32 26 - - 34560300 Pressure sensor board (fivefold) new art. no.

7-33 1 34519629 Infusion pole 3451962A IV pole version 2 new art. no./modified purchase text

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 98



7-33 4 34511628 Mains cord, without connector - Mains cord, without connector230/240 V

modified purchase text

7-33 7 34514899 Swivel caster 3451489A Swivel caster new art. no.

7-33 8 34514902 Swivel caster with brake 3451490A Swivel caster with brake new art. no.

7-33 12 34514872 ABPM module M2005 (integratedinterface board) incl. assemblyangle

3451487A ABPM module M2005 (integratedinterface board) incl. assemblyangle

new art. no.

7-33 - 34514929 Loudspeaker - - relocated from page 7-47 to 7-33



7-38 1 34570004 O-ring 9.3 x 2.4 - - obsolete

7-38 1 34514031 Valve with seal - - obsolete


7-40 14 - - 34773762 O-ring 9.25 x 1.78 new art. no.


7-42 4 3451657A Pressure sensor 3451657B Pressure sensor new art. no.

7-42 17 - - 34773762 O-ring 9.25 x 1.78 new art. no.


7-43 15 - - 34773762 O-ring 9.25 x 1.78 new art. no.


7-45 4 3451657A Pressure sensor 3451657B Pressure sensor new art. no.

7-45 17 - - 34773762 O-ring 9.25 x 1.78 new art. no.

7-47 7 34514635 TFT monitor 3451463B TFT display 15“ new art. no./modified purchase text

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 99



7-47 - 34514198 Low voltage differential signaladapter LVDS


new art. no.

7-47 - 34514929 Loudspeaker - - relocated from page 7-47 to 7-33

7-48 - 7700857 Flow measurement set 0.1 - 1.2l/min

770085A Flow meter 1.1 l/min new art. no./modified purchase text

7-49 - 7702035 Stopcock system with fivestopcocks

770203A Stopcock system with fivestopcocks, incl. lines

new art. no./modified purchase text

7-49 - - - 8255172 Original Perfusor line 50 cm new art. no.

7-49 - 7703643 Chip card - Chip card for BSL-Nexadia modified purchase text

7-49 - - - 7703856 Chip card for card reader new art. no.

7-49 - - - 770284A DCI cable, external new art. no.

7-49 - - - 7703848 Assembly jig (motor for pistonpump)

new art. no.

7-50 - - - 34560513 Retrofit kit LAB2 new art. no.

7-51 - - - 770753 Software 7.53 new art. no.

7-51 - - - 7707530 Software update 7.53 new art. no.


7-51 - - - 7707590 Software update 7.59 new art. no.


7-51 - - - 7703864 Field service utility FSU version2.00

new art. no.

7-52 - - - - - extended compatibility table for software

7-53 - - - 39972445 Silicone tubing 2 x 3, transparent new art. no. (for BIC cartridge holder)

7-53 - - - 34773770 Y-Tubing connector 6 mm new art. no.

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 100



7-53 - - - 39237648 Y-Tubing connector 8 mm new art. no.

7-55 1 34517405 Load cell 3451740A Load cell new art. no.

7-55 4 - - 34560378 Substitution air detector (SUBAD)V2

new art. no.

7-55 9 3451736A Substitution drive board 2 (SAB2) 3451736B Substitution drive board 2 (SAB2) new art. no.

7-55 12 3451876A Single load cell board (SLB) 3451876B Single load cell board (SLB) new art. no.

7-57 1 3451789C UF piston pump (HDF option) 3451789D Piston pump (HDF bag option) new art. no./modified purchase text

7-61 - - - 34560513 Retrofit kit LAB2 new art. no.

7-71 - 34518517 Coupling - Coupling (ABPM) modified purchase text

7-73 1 34514872 ABPM module M2005 (integratedinterface board) incl. assemblyangle

3451487A ABPM module M2005 (integratedinterface board) incl. assemblyangle

new art. no.

7-78 1 - - 34560548 Card reader board new art. no.

7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 101

NotesArt. No. Qty. Description


7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 102



7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 103



7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 104



7 . S p a r e P a r t s L i s t 3 / 2 0 0 8 7 - 105



DialogP_sm_Chapter_7-3_3-2008 pecas.pdf

Documents

Transcript of DialogP_sm_Chapter_7-3_3-2008 pecas.pdf