Diagnostic equipment for vehicles Trailer Socket...

Diagnostic equipment for vehicles

Trailer Socket Tester

Trailer Socket Tester 24 V 7 Poles

Application

• Testing of the socket on the towing vehicle

Product advantages

• Complete indicator test through load resistances

• Rubber protection taps for contacts

• Clear reading through labeled LEDs with clamp indication

possible

Article

No.

Article

Designation

PU

Piece

138965 Trailer Socket Tester 1

V1.7.6.5/IN

T_P_

MP120/1/12-08-17/#780125[36920]

4.1


Radiator Testing Instruments and Supplies

Test Control Unit 50400

Application

• Used for controlling of the complete cooling system with

leak and loss of pressure

Properties

Quick coupling and safety pressure relief valve,

Range 0-2 bar

Delivery amount

• Includes standard adapter (Ø 57 mm) with lock bayonet

Article

No.

Article

Designation

PU

Piece

305316 Cooling system tester 50 400 1

Accessories available PU

044823 Flexible hose 50 cm 1

Carbon Dioxide Leak Tester

Application

• Rapid and easy detection of leaking parts in cylinder head

gasket, cylinder head and engine block

• Secure detection thanks to discolouration of the reaction

liquid

• For all water cooled engines

Article

No.

Article

Designation

PU

Piece

111961 26470 Leak Tester Set complete 1

Scope of supply Amount

127558 26471 Carbon Dioxide Leak Tester 1

110680 Reactions Liquid 300ml 1

112275 Rinsing Liquid 300ml 1

V1.

7.6.

5/IN

T_P_

MP1

20/2

/12-

08-1

7/#7

1935

0[38

789]

4.2


Adapter for Tester 50400

Properties

Adapter with bayonet lock

Image 1 Image 2 Image 3 Image 4

Image

No.

Article

No.

Article

Designation

Ø

mm

PU

Piece

1 416851 Cooler adapter 50433 45 1

2 305251 Cooler adapter 50 460 47 1

3 305243 Cooler adapter 50 420 57 1

4 145832 Universal Adaptor KL-0124-620 60 1

Adapter for Tester 50400

Properties

Adapter with plastic screwing cap

Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7

Image

No.

Article

No.

Article

Designation

Threads PU

Piece

1 305278 Cooler adapter 50423 45,6 x 3 1

2 305260 Cooler adapter 50422 48 x 3 1

3 305286 Cooler adapter 50431 52 x 3 1

4 305294 Cooler adapter 50432 52 x 3 1

5 412767 Cooler adapter 50438 54 x 4 1

6 141024 Cooler adapter 50465 63 x 3 1

7 145833 Adapter for Japanese vehicles - 1

V1.7.6.5/IN

T_P_

MP120/2/12-08-17/#719350[38789]

4.3


Battery Testing / Charging / Servicing Devices

Battery Charging Device BHFB 05 12 V

Microprocessor controlled battery charging device for lead/acid, gel, calcium and AGM (felt) batteries

Product advantages

• Charging 5 A to 12 A – allows perfect, fast and gentle

charging of batteries

• Usage range batteries from 10 Ah to 200 Ah, suitable for

many vehicle batteries

• Batteries can be charged in mounted status

• Reliable protection of the board electronics, control devices,

airbag etc.

• Reverse polarity protection

• Ability to charge continuously/leave charging – ideal for

seasonal vehicles

• Splashproof and Dustproof

• Recommended of Daimler AG

Technical data

Power: 5 A/12 A switchable

Cable length: 180 cm

Dimensions (W x D x H): Approx. 195 x 95 x 57 mm

Weight: Approx. 0.8 kg

Article

No.

Article

Designation

PU

Piece

120780 Battery Charging Device BHFB 05 12V 1

Battery Tester 210

Application

• Testing of 12 V batteries and generators

Product advantages

• Easy operation with fast results almost after 15 seconds

• Suitable for all standard batteries and batteries with GEL

technology

• The test does not strain the battery, due to testing at low

voltage no sparks or overheating and thus no harm to the

electronics

Properties

Digital display with lighting, stable case with soft framing, the

testing of the batteries is performed in accordance with the

standards EN, DIN, IEC, SAE and JS, including reverse polarity

Delivery amount

• Nylon transport case

Article

No.

Article

Designation

PU

Piece

030976 Battery Tester 210 1

Spares PU

150340 Pole Pliers 1

150341 Pole Pliers 1

V1.

7.6.

5/IN

T_P_

MP1

20/3

/12-

08-1

7/#7

8013

2[37

057]

4.4


Battery Charging / Servicing Device BHFL16A / 6 + 12 Volt

Microprocessor controlled battery charging / servicingdevice for lead/acid, gel, calcium and AGM (felt) batteriesand maintenance free batteries

Product advantages

• Monitoring free 100 % full charging of vehicle batteries

• Field of application of batteries from 4 Ah to 300 Ah

• Service charge program-> supports CAN BUS systems with

diagnosis, service, and customer service (“flashing”) so that

the battery still remains fully charged when switched on or

being used.

• Support operation up to max. 16 A -> voltage maintenance

during the changing of the battery prevents data loss


airbag etc.

• Short circuit and reverse polarity protection

• Reactivating program for the charging of fully discharged

batteries

• Ability to charge continiously/leave charging

• Self protection function

• Recommended by Daimler AG

Technical data

Charging voltage: 7.4 V respectively 14.4 V

Nominal charging current: 16 A

Characteristics: IUoU

Temperature: 0 °C up to 35 °C

Cooling: Convection and via casing

Nominal current: 180 V – 260 V 50/60 Hz

Convection and via casing nominal current: 1.8 A (at full

charging current)

Protection type: IP 20

Dimensions (W x D x H): Approx. 250 x 142 x 115 mm

Weight: 1.4 kg

Note

• Warning: Real 16 amperes arithmetically at 14.4 volts

• Manual selectable charging levels: 6 V - 2 A / 12 V - 2 A / 12 V

- 8 A / 12 V - 16 A

Article

No.

Article

Designation

PU

Piece

059522 Battery Charging / Servicing Device BHFL 16A 1

V1.7.6.5/IN

T_P_

MP120/3/12-08-17/#780132[37057]

4.5


Battery Charging / Servicing Device BHFL65A / 12 + 24 Volt

Microprocessor controlled battery charging / service devicefor lead/acid, gel, calcium and AGM (felt) batteries andmaintenance free batteries

Product advantages

• Monitoring-free 100% full charging of vehicle batteries

• Field of application of batteries from 10 Ah to 1000 Ah

• Service -> supports CAN BUS systems with diagnosis,

service, customer service (“flashing”) so that the battery still

remains fully charged when switched on or being used.

• Support operation up to max. 65 A -> voltage maintenance

during the changing of the battery prevents

• LCD-display -> easy operation, current information is simply

read


airbag etc.

• Short circuit and reverse polraity protection

• Reactivating program for the charging of fully discharged

batteries

• Ability to charge continuously/leave charging

• Self protection function

• Wall mounting possible

• Recommended by Daimler AG and Porsche

Technical data

Charging voltage: 14.4 respectively 28.8 V

Nominal charging current: 65 A (12 V) respectively 35 A (24 V)

Charging characteristics: IUoU

Environment temperature: 0 °C up to 35 °C

Cooling: Temperature controlled

Fan nominal voltage: 180 V – 260 V 50/60 Hz

Power consumption from network: 5.2 A (at full charging

current)

Protection type: IP 20

Dimensions (W x D x H): approx. 283 x 303 x 100 mm

Weight: 3.8 kg

Note

• Warning: Real 16 amperes arithmetically at 14.4 volts

• Manually selectable charging levels: 6 V - 2 A / 12 V - 2 A / 12

V - 8 A / 12 V - 16 A

Article

No.

Article

Designation

PU

Piece

059523 Battery Charging / Servicing Device BHFL 65A 1

V1.

7.6.

5/IN

T_P_

MP1

20/3

/12-

08-1

7/#7

8013

2[37

057]

4.6


Battery Tester with Printer

Application

• 12 V Starter batteries, lead acid, AGM and GEL

• 12 V Starter and charging systems

Product advantages

• Tests lead acid (liquid), AGM (felt) and GEL batteries

• Possible to test discharged batteries

• 5 button operation -> simple button selection of the

temperature parameters and the menu functions

• Tester and printer in one -> fast test results and test result

document for the customer

• Workshop address can be entered and is also visible on the

print out

• Servo-Technology recognizes bad connections. A good

connection is guaranteed through the movement of the

connection clamps and thus correct testing

• The actual cold start performance and the charging status of

the battery, the starter and charging systems are diagnosed

and printed

• Surface voltage procedure-> the device recognizes a surface

voltage, which may distort the test result. By switching on

the consumer (light, fan...), the surface voltage can be

eliminated

• Temperature-compensation

• Recognition of defect cells

• Reverse polarity protection

• 19 languages can be set

Technical data

Standards: EN, DIN, SAE and IEC

Operation ranges: 100 – 900 A

Operation ranges: 100 – 550 A

Voltmeter: 0 to 30 VDC +/- 0.05 VDC

Display: 2 lines LCD-Graphic display

Operating temperature: -18 °C to +50 °C

Cable length: 533.4 mm

Dimensions: 230 mm x 102 mm x 65 mm

Weight: 499 g

Article

No.

Article

Designation

PU

Piece

043285 Battery Tester with Printer 35P 1

V1.7.6.5/IN

T_P_

MP120/3/12-08-17/#780132[37057]

4.7


Motometer Compression Recorder

Compression Pressure Recorder – Set forOtto and Diesel Engines

Delivery amount

• 1 Compression Pressure Recorder Otto Engine 3.5 – 17.5 bar

• 1 Compression Pressure Recorder Diesel Engine 10 – 40 bar

or 10 – 60 bar

• 1 Pressure Hose

• 3 Extensions 70 mm, 105 mm and 140 mm

• 1 Gusset

• 1 Straight Nipple Adapter

• 3 Rubber Cones with Nozzles

• 2 Packages containing Diagram Sheets Otto/Diesel

• 1 List for Connection Nipples/User Guide

Article

No.

Article

Designation

PU

Piece

104747 Compression Pressure Recorder 1


Compression Pressure Recorder – Set for toEngines

Delivery amount

• 1 Compression Pressure Recorder 3.5 – 17.5 bar

• 1 Pressure Hose

• 3 Extensions 70 mm, 105 mm and 140 mm

• 1 Gusset


• 3 Rubber Cones with Nozzles

• 1 Package containing Diagram Sheets


Article

No.

Article

Designation

PU

Piece


Compression Pressure Recorder – Set forDiesel Engines

Delivery amount

• 1 Compression Pressure Recorder Diesel Engine 10 – 40 bar

or 10 – 60 bar

• 1 Pressure Hose


• 1 Package containing Diagram Sheets


Article

No.

Article

Designation

PU

Piece

306622 Compression Pressure Recorder Set 1

306630 Compression Pressure Recorder Set 1

V1.

7.6.

5/IN

T_P_

MP1

20/4

/11-

11-1

8/#7

8013

9[38

501]

4.8


Hoses

Properties

SK 1001 with quick coupling and nipple

SK with 2001 screw connection

SK 2001 SK 1001

Article

No.

Article

Designation

Length

mm

PU

Piece

207098 High pressure hose SK 2001, for diesel

engines

285 1

306584 Pressure hose SK 1001, for gasoline and

diesel engines

350 1

Rubber Cone with or without Nozzles

Properties

With quick coupling, for gasoline engines Prod. no.

306525 Prod. no.

306606

Prod. no.

104748 Prod. no.

306592

Prod. no.

306533Prod. no.

207071

Article

No.

Article

Designation

Ø

mm

PU

Piece

306525 Rubber cone with 63 ° nozzle SK 1007 17 1

306606 Rubber cone 63 ° SK 0500 17 1

104748 Rubber cone with 63 ° nozzle SK 1013 21 1

306533 Rubber cone 30 ° SK 0200 21 1

207071 Rubber cone 30 ° with socket SK 1006 21 1

306592 Rubber cone 63 ° SK 0400 21 1

Back Pressure Valve

Article

No.

Article

Designation

PU

Piece

207080 Check valve SK 1003 1

Nipple Adapter

Properties

With quick coupling, for diesel engines, link between the

nipple and compressor pressure recorder Art.-No. 306657

Art.-No. 306649

Article

No.

Article

Designation

PU

Piece

306649 Nipple SK 1008 1

306657 Nipple SK 1008 1

V1.7.6.5/IN

T_P_

MP120/4/11-11-18/#780139[38501]

4.9


Extensions

Art.-No. 306568, 306541 Art.-No. 207233

Art.-No. 306576

Article

No.

Article

Designation

Length

mm

PU

Piece

306568 Extension, SK 1003 70 1

306576 Extension, SK 1002 105 1

306541 Extension SK 1005 140 1

207233 Extension, SK 2003 155 1

Connection Nipple for Nozzle HolderOpening (D)

Art.-No. 124646

Art.-No. 124652

Art.-No. 124645

Article

No.

Article

Designation

PU

Piece

124645 Nipple 1

124646 Nipple 1

124652 Nipple 1

Connection Nipple for Glow Plug Hole (G)

Art.-No. 104732

Art.-No. 124635 Art.-No. 124638

Art.-No. 124640

Art.-No. 124637

Article

No.

Article

Designation

PU

Piece

104732 Nipple 1

124637 Nipple

Slider Plate

Application

• Fixing of the graph sheets

Article

No.

Article

Designation

PU

Piece

207063 Slider Plate 1

V1.

7.6.

5/IN

T_P_

MP1

20/4

/11-

11-1

8/#7

8013

9[38

501]

4.10


Contact Handle

Application

• Starter activity

Product advantages

• The handle enablesa pressure test, which is required or can

be performed by 1 person

• The handle enables a pressure test is required by 1 person

• The handle can be fitted to all pressure recorders

Article

No.

Article

Designation

PU

Piece

207047 Contact Handle 1

Chart Sheets

Properties

Design UK 12 = gasoline engine max. 12 bar

Design UK 17.5 = gasoline engine max. 17.5 bar

Design DM 40 = diesel engine max. 40 bar

Design DM 60 = diesel engine max.60 bar

Article

No.

Article

Designation

Content

Piece

PU

Piece

167614 UK chart sheets 12 SB 400 1

167622 Chart sheets SB UK 17.5 400 1

167630 Chart sheets DM 40 SB 400 1

929107 Chart sheets 60 SB DM 400 1

V1.7.6.5/IN

T_P_

MP120/4/11-11-18/#780139[38501]

4.11


Battery Acid/Frost Protection Tester

Frost Protection Tester for Coolant

Application

• Testing the percentage of frost protection (Ethandiol,

Ethylenglykol) in the coolant

Product advantages

• Direct reading of all motor temperatures by using the same

control procedure

• Turning valve prevents dripping

• Reading the value scale guarantees a simple, quick and

exact measurement

• No need to hold the instrument vertically thanks to the

pendulum indicator

• Solid plastic housing

Article

No.

Article

Designation

PU

Piece

140089 Frost protection tester for coolant 1

Antifreeze and coolant tester for windowwashing system

Application

• Used for checking the antifreeze component in the

windshield washer

Product advantages

• Quick reading through color and numerical scale

• Robust design with plastic cylinder

Properties

For isopropanol / methanol / water mixture, display range from

0 ° C to -30 ° C

Article

No.

Article

Designation

PU

Piece

140091 Antifreeze tester 1

V1.

7.6.

5/IN

T_P_

MP1

20/5

/12-

08-1

7/#7

1935

6[38

657]

4.12


Antifreeze, radiator, windshield washer andbattery acid tester FT 2030

Application

• Control of cooler, plate frost protection and battery acid

Product advantages

• 1 device for three different tests

• Result can be already measured with a test drop

• Adjustable eyepiece to balance individual vision

• Scale display is easily visible

Properties

G12 antifreeze suitable for (Audi ), frost protection G12 suitable

Article

No.

Article

Designation

PU

Piece

204773 Antifreeze tester 1

Spares PU

119525 Replacement plate 1

Battery Acid Tester

Application

• Checking the density of cars batteries acid

Product advantages

• Quick reading through color and numerical scale

• Robust design with plastic cylinder

Properties

Selection of 1:10 to 1:30 kg / dm ³ is possible

Article

No.

Article

Designation

PU

Piece

140092 Battery Acid Tester 1

V1.7.6.5/IN

T_P_

MP120/5/12-08-17/#719356[38657]

4.13


Headlight Adjustment Device

Headlight Adjustment Device with MirrorVisor

Application

• Controlling and testing of headlights of any type of

motorbike, car as well as lorry

• Precise and fast adjustment of vehicle headlights (normal

beam, full beam and fog light)

Product advantages

• Controlling of normal beam, full beam and fog light

• 2 photodiodes for normal beam, full beam intensity

• Pre-selection button for normal beam, full beam intensity

• Easy alignment of the device with help of a mirror visor

• Alignment of the optical box with help of an internal spirit

level

• An easy height adjustment of the casing guaranteed by

spring balancer

• Polycarbonate optical lens

• Also appropriate for Xenon headlights

Technical data

Operating height min: 240 mm

Operating height max: 1410 mm

Width: 600 mm

Length: 670 mm

Heigth: 1740 mm

Weight: 30 kg

Properties

Mechanical headlight adjustment device with mirror visor and

analogous lux meter

Article

No.

Article

Designation

PU

Piece

047894 Headlight Adjustment Device with Mirror Visor 1


639842 Cover for Headlight Adjustment Device 1

V1.

7.6.

5/IN

T_P_

MP1

20/6

/12-

08-1

7/#7

8012

9[36

977]

4.14


Digital Video Endoscope

Digital Video Endoscope

Product advantages

• Perfect picture and video quality thanks to a special camera

Base station with LCD TFT 3.5" monitor

Integrated SD-memory card slot (up to 2 GB) inside the base

station

Charge control indicator on the hand-held unit

Internal microphone in the hand-held unit

Greatest possible angle of view thanks to the special

camera, probe head and attachement reflector

Probe head with 0°

Probe head with dimmable LED technology

Probe made from scratch resistant sapphire glass can be

added on Camera sleeve made of stainless steel

Durable color marking of different attachment reflectors

No use of glass fiber cable which makes the probes more

blend insensitive

Quick change of the probes through the standard adapter

system

Optimal handling through the wireless, radio-controlled

transfer of data

Easy operation with digital and multilingual menu navigation

Recording through photo, video and voice recording

Connection to a TV is possible

Technical data

Monitor: 16.7 Mio. colors

Frame rate: ~30 bps

Image storage format: JPEG (640 x 480)

Compression format: MPEG4

Starting size: NTSC and PAL

Transmitter frequency: 2.4 GHz 4 channels

Battery: Li-Polymer 3.7 V

Recharging time: Approx. 2 h

Operating time: Approx. 4 h

Operating temperature: -20 °C up to 75 °C

Voice guidance: 14 languages

Properties

All in one: Display, recorder, integrated light source and LCD

monitor, portable and independant power supply system

Hand haled to rechage on

base station

Digital Video- Endoscope Set

Included in delievery

Add on reflector

70°

Add on reflector

90°

Add on reflector

110°

Gauging

reflector

Article

No.

Article

Designation

PU

Piece

082749 Digital Video Endoscope Set 1

V1.7.6.5/IN

T_P_

MP120/7/12-08-17/#743956[658484]

4.15



Base Station with LCD Monitor 1

Hand-held unit 1

Probe Ø 5.5 mm, 1 with Nose Camera 0°, spiral cable semi-

rigid

1

Battery recharging unit 110 V/220 V 1

1 GB SD Flash memory card 1

Attachment reflector 70° 1



AV Cable 2 m 1

Cleaning set for camera head and reflectors 1

Software CD and dongle 1

Gauging reflector 1

Plastic case (air seal) incl. foam insert 1

User manual 1


082750 Probe Ø 5.5 mm / 0° semi-rigid sprial 1m

082751 Probe Ø 5.5 mm / 0° PVC fully flexible 2m 1

082752 Probe Ø 5.5 mm / 0° PVC fully flexible 3m

082753 Probe Ø 5.5 mm / 90° semi-rigid spiral 1m

082754 Probe Ø 5.5 mm / 90° PVC fully flexible 2m

082755 Probe Ø 5.5 mm / 90° PVC fully flexible 3m 1

097419 Probe Ø 3.9 mm / 90° semi-rigid spiral 1m

V1.

7.6.

5/IN

T_P_

MP1

20/7

/12-

08-1

7/#7

4395

6[65

8484

]

4.16


Diverse Testing Devices

Diesel Injection Nozzle Tester

Application

• Testing of diesel injection nozzles in detached status

• Testing of injection pressure and atomization

Main user

Car repair shops, truck repair shops

Product advantages

• Reservoir for collecting fuel during the test procedure

• Glass splash protection against injury and spray fog

• Table mounting of the tester is possible

Article

No.

Article

Designation

PU

Piece

107818 Diesel Injection Nozzle Tester 1

Spares PU

114799 Splash Protection for Injection Nozzle Tester 1

Engine Stethoscope

Application

• Fast localization of knocking, dragging and bearing sounds

due to ultra sensitive sound detector

Delivery amount

• Incl. sensor extension for hard to reach areas

Note

• Attention must be paid whilst the engine is running

Article

No.

Article

Designation

PU

Piece

823454 Engine Stethoscope 1

V1.7.6.5/IN

T_P_

MP120/8/12-08-17/#780154[42274]

4.17


Service Gauge Devices

Vehicle Usage Service Interval Resetter A/V

Note

• The vehicles in the table below indicate the starting model.

• Newer manufacture years are automatically suitable.

• Touran, Golf V and Touareg are not suitable

VW Man. year Audi Man. year Ford Man. year Skoda Man. year SEAT Man. year

Sharan 96- A3 97- Galaxy 96- Octavia 97- Alhambra 96-

Polo 98- A4 95- Arosa 97-

Passat 97- A6/100 95-

Golf IV 98- A8 96-

Lupo alle TT alle

T4 alle

Beetle alle

Bora alle

Vehicle Usage Service Interval Resetter Multi

Note

• The vehicles in the table below indicate the starting model.

• Newer manufacture years are automatically suitable.

• Touran, Golf V and Touareg are not suitable

VW Man. year Audi Man. year Ford Man. year Skoda Man. year SEAT Man. year BMW Man. year

Sharan 96 A3 97 Galaxy 96 Octavia 97 Alhambra 96 alle 87

Polo 98 A4 95 Felicia alle OBD Arosa 97 alle OBD

Passat 97 A6/100 95

Golf IV 98 A8 96

Lupo alle TT alle

T4 alle

Beetle alle

Bora alle

V1.

7.6.

5/IN

T_P_

MP1

20/9

/12-

08-1

7/#7

8015

8[88

464]

4.18


Service Interval Resetter CAN Bus

Service Interval Resetter BMW CAN

All BMW Models man year 1987 to 03/2006

Application

• Resetting of the oil service and inspection interval displays

Main user

Car repair shops

Product advantages

• This service interval resetter resets the microprocessor

controlled by the according to the instructions of the vehicle

manufacturer.

• Both plugs (20 pole BMW and OBD-II plug) united in one

device

• Compact construction of the interval resetter

• Easy operating surface / foil keyboard

• Protection class IP 67; extremely stable against humidity,

dirt, oils and mechanical loading

• 24 month guarantee

Technical data

Operating voltage: 12 VDC

Power consumption: 30 mA

Weight: Approx. 220 g

Temperature range: -10°C/+40°C

Protection class: IP 67

Adaptation: 20 pole BMW socket or OBD-II

Properties

The digital resetter communicates, depending on

vehicle model, via the 20 pole BMW service socket or the

OBD-II socket with the vehicle electronics

Delivery amount

• Service Interval Resetter

• User Guide

Detail Operating Surface

BMW-Model

3 5 7 X3 X5 Z3 Z4 Z8 Mini Rover from

manu. year

2001

E30 E34 E32 E83 E63 E36/7 E85 E52 75

E36 E39 E38 E36/8

E46

Article

No.

Article

Designation

PU

Piece

049916 Service Interval Resetter BMW-CAN 1 V1.7.6.5/IN

T_P_

MP120/10/12-08-17/#780164[431323]

4.19


Service Interval Resetter VAG CAN

Audi, Seat, Skoda and VW vehicles all models up to MY06/2006

Application

• Resetting of the oil service and inspection interval displays

(oil, Service, IN1, IN2, insp., or airbag control light)

Main user

Car repair shops

Product advantages

• Automatic vehicle identification

• Automatic re-programming of the service interval display

according to manufacturer guidelines

• A long-life service value can additionally be read and re-

programmed if necessary

• With CAN Bus vehicles, the airbag failure memory and thus

the airbag control light in the combi instrument can be

deleted

• The service interval resetter can be updated

• Protection class IP 67; extreme stable against humidity, dirt,

oils and mechanical loading

• 24 months guarantee

Technical data

Operation voltage: 12 VDC

Power consumption: 100 mA

Temperature range: -10°C/+40°C

Weight: ca. 230 g

Protection class: IP 67

Adaptation: OBD II

Properties

The service interval resetter VAG CAN for the service interval

display communicates via the OBD II socket with the vehicle.

Reset occurs automatically via K line or CAN line protocol

Delivery amount

• Servive interval resetter

• User manual

Audi

til. man. year 06/2006

VW


Seat


Skoda


Ford


A 100 /Man. year 95-97 Golf IV Arosa Octavia Galaxy

A2 Golf V Ibiza Fabia Galaxy 2.8

A3 Bora / Jetta Cordoba Superb

A4 / A4 Cabrio Polo Toledo

A6 / A6 Allrad Fox Alhambra

A8 Lupo Leon

TT New Beetle Altea

S2 New Beetle Cabrio

S4 Passat

S6 Sharan

S8 Touareg

Q7 Touran

Phaeton

Caddy

T4- / T5-Bus

Article

No.

Article

Designation

PU

Piece

049915 Service Interval Resetter VAG CAN 1

V1.

7.6.

5/IN

T_P_

MP1

20/1

0/12

-08-

17/#

7801

64[4

3132

3]

4.20

Torque wrenches

Torque Wrenches

Torque Wrench "Topline" Measuring Range2.5 – 320 Nm

Application

• Precise tightening and control of screw connections

Product advantages

• With automatic triggering (acoustic and tangible) when the

set value has been reached

• Permanent scaling, which is resistant to shock and impact

• Clockwise and counter-clockwise tightening with set value by

means of toggle ratchet

• Reduced danger of slipping and injury thanks to handle with

collar and rotating ring

• Fine-scaling, as it is precisely adjustable to 0.5 Nm or 1 Nm

Properties

Accuracy of +/- 3% of the scale value (in the direction of

operation), acc. to DIN EN ISO 6789, safe fixation of the value

due to locking at the rotating ring

Delivery amount

• With test certificate

Article

No.

Article

Designation

Measuring range

Nm

Drive

inches

Length

mm

PU

Piece

025669 Torque Wrench 2,5 - 25 1/4" 232 1

025670 Torque Wrench 10 - 60 3/8" 320 1

025671 Torque Wrench 40 - 200 1/2" 512 1

025672 Torque Wrench 60 - 320 1/2" 632 1

Torque Wrench Measuring Range 300 - 800Nm

Product advantages

• With automatic triggering (acoustic and tangible) when the

set value has been reached

• Permanent scaling, which is resistant to shock and impact



• Reduced danger of slipping and injury thanks to handle with

collar and rotating ring

• Fine-scaling, as it is precisely adjustable to 0.5 Nm or 1 Nm

Properties

Accuracy of +/- 2% of the scale value (in the direction of

operation), acc. to DIN EN ISO 6789:2003 (D)

Delivery amount


Article

No.

Article

Designation

Measuring range

Nm

Drive

inches

Length

mm

PU

Piece

047838 Torque Wrench 300 - 800 3/4" 1280 1

V1.7.6.5/IN

T_P_

MP100/1/12-08-17/#780168[131051]

4.21

Torque wrenches

Rotation Angle Measurement Device

Application

• Angle-controlled screw tightening

Product advantages

• Attachable on all 1⁄2“ torque wrenches

• With magnetic and alligator clamp for locking/fixation

Article

No.

Article

Designation

PU

Piece

207268 Rotation Angle Meas. Device 1

Torque Wrench Gauge Range 400 - 1000 Nm

Product advantages

• With automatical release, can be heard and felt upon

reaching the set value

• Release power 590 N (~ approx. 60 kg)

• Continuous scaling, therefore insensitive to impact and fall

effect



• Turning head for additional locking of the setting

• 2 parts, detachable, in bag

Properties

Accuracy of +/- 3 % of scale value (in usage direction)

according to DIN EN ISO 6789:2003 (D)

Delivery amount

• With test certificate, bag and unlocking tool

Article

No.

Article

Designation

Measuring Range

Nm

Drive

inches

Length

mm

PU

Piece

051826 Torque Wrench 400 - 1000 3/4" 1788 1

V1.

7.6.

5/IN

T_P_

MP1

00/1

/12-

08-1

7/#7

8016

8[13

1051

]

4.22

Torque wrenches

Torque Wrench Measuring Range 2 - 750 Nm

Application

• Precise tightening of screw connections

Product advantages

• Accuracy of +/- 3% of the set scale value

• Micrometer setting guarantees exact and quick setting of the

required value

• Safe operation due to ergonomic handle, no slipping

• Acoustic signal shows that the set value has been reached

Delivery amount


2 — 25 Nm 5 — 60 Nm

75 — 400 Nm

140 — 750 Nm

Repositioning

square

replacement part

Article

No.

Article

Designation

Measuring range

Nm

Drive

inches

Length

mm

PU

Piece

000597 Torque Wrench 2 - 25 1/4" 350

001297 Torque Wrench 5 - 60 3/8" 350

000600 Torque Wrench 20 - 200 1/2" 480

000601 Torque Wrench 60 - 300 1/2" 575

000602 Torque Wrench 75 - 400 1/2" 625

000603 Torque Wrench 140 - 750 3/4" 1230

Spares Drive

inches

PU

Piece

114487 Torque Wrench 1/2" 1



V1.7.6.5/IN

T_P_

MP100/1/12-08-17/#780168[131051]

4.23

Torque wrenches

Torque Wrench with Repositioning Square Wrench

Torque Wrench with Repositioning SquareWrench Measuring Range 1 - 750 Nm

Application

• Precise tightening and control of screw connections

Product advantages

• Large inspection window with magnifying effect

• Scale in Nm and lbf/ft division for precise adjustment

• Additional micrometer scale in Nm for an accurate and fine

adjustment

• Robust 60-tooth ratchet mechanism

• Ergonomic, hand-friendly two-component handle for easy

operation

• Change of the operating direction (inversing and

counterclockwise suit) effected by the drive square

• Simple setting of the torque by pulling out and inserting the

slide button on the handle end

• The achievement of the desired torque is indicated audible

and tactile signals

Properties

Accuracy of + / - 3% of the preset scale value (in operating

direction), according to DIN EN ISO 6789

Delivery amount

• With inspection certificate

Note

• After use, relieve spring and set to the lowest value!

Art.-No. 86470

Art.-No. 86472 Art.-No. 86467

Detail 1/4"

Detail 3/8"

Detail 1/2"

Article

No.

Article

Designation

Measuring range

Nm

Drive

inches

Length

mm

PU

Piece

086467 Torque Wrench 1 - 25 1/4" 289

086472 Torque Wrench 5 - 50 3/8" 350

086468 Torque Wrench 20 - 200 1/2" 500

086469 Torque Wrench 60 - 320 1/2" 585

086470 Torque Wrench 80 - 420 1/2" 678

086471 Torque Wrench 140 - 750 3/4" 1250

Repositioning Square Wrench

Properties

Mushroom square made of chrome-vanadium steel with

ballistic protection

Art.-No. 88084

Art.-No. 88087

Art.-No. 88088

Art.-No. 88090

Article

No.

Article

Designation

Length

mm

PU

Piece

088084 Torque Wrench Repositioning Square 3/8" - 1/4" 33 1

088087 Torque Wrench Repositioning Square 3/8" 33 1

088088 Torque Wrench Repositioning Square 1/2" - 3/8" 52 1

088090 Torque Wrench Repositioning Square 1/2 " 52 1

115076 Torque Wrench 71 1

V1.

7.6.

5/IN

T_P_

MP1

00/3

/12-

08-1

7/#8

4119

9[70

8578

]

4.24

Electronic measuring instrument

Multimeter

Multimeter Testing Device

Application

• Suitable for measuring and error detection in electric

variables in the control

Product advantages

• Multiple measuring device for electricity, voltage, resistance,

capacity, diode, transistor and continuity control

Technical data

Voltage DC: 0.2 – 600V

Voltage AC: 0.2 – 600V

DC current: 0.2 mA – 10 A

AC current: 2 mA – 10 A

Resistance: 200 Ohm – 20 M Ohm

Double insulation: 600V Cat. II/ 300 V Cat. III

Dimensions L x W x H: 165 x 85 x 40 mm

Properties

Large LCD display 3 1/2", overload protection

Delivery amount

• Incl. measurement wires, batteries

Article

No.

Article

Designation

PU

Piece

119836 Multimeter Testing Device 1


144333 Measuring wires, 2 parts 1

144131 Safety Clip Testing Probes Set red/black 1

144129 Alligator clip set red/black 1

144130 Safety measuring wire set red/black

144128 Safety test probes set red/black 1

Multimeter Measuring Wire Set

Product advantages

• Multi-purpose measuring wire set with 4 mm safety plug-in

Technical data

Current: up to 16 A

Voltage category: CAT III/1000 V

Alligator clips: CAT II/300 V

Article

No.

Article

Designation

PU

Piece

138968 Multimeter measuring line set 1

Content Amount

144131 Safety Clip Testing Probes Set red/black 1

144130 Safety measuring wire set red/black 1

144129 Alligator clip set red/black 1

144128 Safety test probes set red/black 1

V1.7.6.5/IN

T_P_

MP110/1/12-08-17/#780174[37012]

4.25


Testing Device for Electronic Equipment

Testboy Professional

Application

• Testing of direct and alternating voltage of 1 2 – 690 V via

LED display, acoustical and visual continuity tests between 0

to 50 0 ohm, testing of the direction of the rotar y field, FI

trigger at 30 mA, phase search > 100 V

Product advantages

• One-handed operation via guide lugs

• Visual warning of life-threatening voltages via flashing LEDs

• Measuring probe protector which cannot be lost

Properties

Dust proof and water-jet proof (IP 65), tested and approved

acc. to TÜV/GS IEC/EN 61 243-3, 3 year manufacturer warranty

Delivery amount

• 2 x micro batteries (prod. no. 010525)

Article

No.

Article

Designation

PU

Piece

169216 Testboy Professional 1

Testboy 20

Application

• Visual continuity test up to 20 ohm, acoustic continuity test

up to 250 ohm

• Contact free voltage test

• 1 pin phase search

Product advantages

• LED torch function

• Insulated connection sockets and break-proof casing

Properties

Resistant against ingress of foreign objects and water jets (IP

44), tested and approved acc. to TÜV/GS IEC/EN 61010, 3 year

manufacturer warranty

Delivery amount

• 3 x mignon batteries (prod. no. 010524)

Article

No.

Article

Designation

PU

Piece

169217 Testboy 20 1

V1.

7.6.

5/IN

T_P_

MP1

10/2

/12-

08-1

7/#7

8017

8[88

478]

4.26


Testboy 100

Application

• Contact free determination of alternating voltage (120–

1000V) with cable connectors, power outlets, fuses,

switching devices, contact boxes, lights and light chains

• Detection of cable breaks

Product advantages

• With LED torch function

Properties

Resistant against ingress of foreign objects and water jets (IP

44)

Delivery amount

• 2 x micro batteries (prod. no. 010525)

Article

No.

Article

Designation

PU

Piece

156731 Testboy line tester

V1.7.6.5/IN

T_P_

MP110/2/12-08-17/#780178[88478]

4.27


Various Measuring Tools

Magnetic Field Tester

Checking magnetic fields contactlessly and fast

Application

• Testing of solenoid valve in hydraulic and pneumatic control

systems, relays, solenoids and solenoid valve by machine

tools

Product advantages

• Direct contact with the probe is often not necessary (cover

panels usually do not have to be removed). Tip lights up

when a magnetic field is present.

• With integrated high performance LED, which provides bright

and white light

Properties

Handy– Suitable for every bag or case, tested by TÜV/GS , 3

year warranty

Article

No.

Article

Designation

PU

Piece

043344 Magnetic Field Tester 1

Digital Clamp-on Ammeter

Application

• Change and equal voltage measurement ( AC and DC

voltage )

• Change and dc measurement (e.g. charging current dynamo,

leakage currents, cable disruptions)

• Resistance measurement

• Continuity and diode test

Product advantages

• Compact, handy device for versatile use with direct digital

LCD display

Technical data

Alternating voltage(DC): 0.1 V – 600 V

Direct volatge (AC): 0.1 V – 600 V

Alternating current (DC): 0.01 A – 400 A

Direct current (AC): 0.01 A – 400 A

Resistance: 0 - 400 Ohm

Way of proetction: IP 30

Weigth: 210 g

Dimensions: 194 x 72 x 35 mm

Length of test leads: 1.30 m

Properties

Battery change indicator, 3-year manufacturer's warranty,

tested by TÜV / GS (German Technical Inspection Association/

Safety Tested)

Delivery amount

• Current clamp, 2 test leads, case, 2 micro batteries (prod. no.

010525)

Article

No.

Article

Designation

PU

Piece

043345 Digital clamp-on ammeter 1

V1.

7.6.

5/IN

T_P_

MP1

10/3

/12-

08-1

7/#7

2070

7[40

859]

4.28


Pliers Ammeter

Application

• Performance measurement of the generator

• Consumption measurement of the electric motor (starter,

wiper motor)

Properties

Measurement of DC and AC up to 2000 A, range from 200 A

to 2000 A can be selected

Multimeter

Accessories

Connection Diagram

Article

No.

Article

Designation

PU

Piece

145308 Pliers ammeter 1


250000 Multimeter Testing Device

Strobe Lamp for Gasoline Engines

Application

• Test: Preignition, engine speed, closing angle

• Can be used as a voltmeter

Properties

Digital display

Delivery amount

• Includes carrying case

Article

No.

Article

Designation

PU

Piece

149974 Strobe Lamp 1

V1.7.6.5/IN

T_P_

MP110/3/12-08-17/#720707[40859]

4.29


Multifunction Control Light Tester

Application

• Used for localization of short circuits and bad mass contacts,

contuinity test of electrical components, such as supporter

electronics, relays, cooler blasts, fuel out-pump , lamps,

window controls etc.

Product advantages

• Polarity test without reversal

• Visual and acoustic display function

• Safety through self-test and short circuit protection

Delivery amount

• Including 6 m test cable with alligator clip

Connection diagram

Article

No.

Article

Designation

PU

Piece

116339 Multifunction Control Light Tester 1

Car Check Voltage Tester

Voltage Tester DC Voltage 3 – 48 V

Application

• Trouble-shooting of electrical components

Product advantages

• Polarity testing without reversal

• With pointed tip for insulated cables including crocodile

clamp

• Cable tester with LED-indicator

• Hooks for difficult to access wires

Connecting Illustration

Article

No.

Article

Designation

PU

Piece

715972 Car Check Voltage Tester 3-48 V 1

Test Lamp Metal

DC voltage tester 6-24 V

Application

• Testing / troubleshooting of electronic components such as

ignition, lighting system, etc.

Properties

With piercing tip for insulated wire and alligator clip

Delivery amount

• Includes protective cap for lancing tip

Article

No.

Article

Designation

PU

Piece

013560 Test Lamp 1

Spares PU

145179 Bulb for testing lamp 18V/3W 1

668338 Crocodile Clip 5A 10

V1.

7.6.

5/IN

T_P_

MP1

10/3

/12-

08-1

7/#7

2070

7[40

859]

4.30


Voltage Tester Screwdriver

Properties

Insulated blade, can be used up to 250 V

Article

No.

Article

Designation

Blades

B x L mm

Total

length mm

PU

Piece

066885 Slotted Voltage Detector

Screwdriver

3 x 65 140 1

Brake Fluid Tester BFT 1

Application

• Checking the brake fluid for sharing of the water content

Product advantages

• Test result will be immediately read off

• Simple test - by test plug in the reservoir or brake cylinder

Properties

Suitable for brake fluid DOT 3 and DOT Class 4, status

indication through LEDs

Article

No.

Article

Designation

PU

Piece

326240 Brake Fluid Tester 1


010521 E-Block LR 61 battery 1

V1.7.6.5/IN

T_P_

MP110/3/12-08-17/#720707[40859]

4.31


Gas Leak Detector

Application

• For the detection of gases (eg methane, natural gas, ethane,

butane, propane, hydrogen, carbon monoxide) in engine

rooms and leaks in vehicle lines with gas powered vehicles

Product advantages

• Illuminated sensor head - also visible in dark areas where the

leakage is

• Flexible swan neck of 460 mm - Ensures even hard to reach

areas are accessible

• Easy to use - easy to adjust the sensitivity through

adjustment wheel

• LED display of gas concentration to 1 vol% (= 10.000 ppm =

10.000 ml / m³)

Technical data

Sensor type: Solid state semiconductor

Sensitivity: < 50 ppm methane

Probe length: 460 mm

Operation time: 5 hours

Weight: 460 grm

Properties

Rugged, waterproof housing controlled, optical and acoustic

display, optical display battery status, processor

Delivery amount

• 1 gas leak detector

1 block battery 9 V

1 plastic case

Article

No.

Article

Designation

PU

Piece

011645 Gas Leak Detector 1

Brake Fluid Tester DOT 4

Application

• Handy tester for determination of brake fluid performance

DOT 4

Product advantages

• 5 light emitting diodes for accurate indication of water

content in the brake fluid in the following levels:

0%, <1%, 2%, 3%,> 4% -> fast and accurate result

Results are easy to read

• Simple and quick measurement of brake fluid performance

• Small and handy -> always at hand

• Robust, with a protective cap for professional use

• TÜV (German Association for Technical Inspection) certified

safety (EN 61010)

• Can be used in car, truck, motorcycle, workshop and service

areas

Delivery amount

• Battery is also included

Article

No.

Article

Designation

PU

Piece

049919 Brake Fluid Tester DOT 4 1

059638 Battery A23 1/10

V1.

7.6.

5/IN

T_P_

MP1

10/3

/12-

08-1

7/#7

2070

7[40

859]

4.32


Temperature Scale

Thermo Control

Non contact infra-red temperature measuring unit withlaser pointer

Product advantages

• Handy, practical and applicable in all areas

• Quick and simple surface temperature measurement at the

touch of a button

Properties

Measurement range -18 °C up to +260 °C

Temperature Measurement of

Brakes

Temperature Measurement of

Radiator

Temperature Measurement of Air

Conditioning/Heater

Temperature Measurement of the

Thermostat

Article

No.

Article

Designation

PU

Piece

151417 Thermo Control 1


010521 E-Block LR 61 battery 1

V1.7.6.5/IN

T_P_

MP110/4/12-08-17/#719361[59485]

4.33


Temperature Gauge with K-Type Sensor

Thermo Control with K-Type Sensor

Infrared laser thermometer for connection of a K-TypeThermo Sensor

Product advantages

• Touch-free measuring (via infrared/laser) and contact

measurement (via K-Type sensor) is possible -> multiple uses

• High measuring ranges

• Fast response time -> measuring result rapidly available

• °C/°F switching -> measuring in celsius and fahrenheit

possible

• Engageable laser point with LED torch

• Engageable LCD display lighting

• Value memory for min. and max. values

• Difference value determination (DIF) between highest and

lowest measurement value

• Possible to set continuous measuring

• Possible to set alarm values (HAL and LOW)

• Average determination (AVG) of the temperature

measurement

• Possible to set the emission degree (= energy radiation

characteristics of the material to be measured)

• Automatic switch off after approx. 60 seconds

• Revolver form -> handy

• Compact, stable construction

• TÜV/GS tested (German Association for Technical Inspection

(Safety Tested)

Technical data

Measurement accuracy with touch-free measurement up to

35 ° C: /- 1.0 °C

Measurement accuracy with touch-free measurement from

35 °C -to 500 °C: +/- 2 % or 2 °C

Measurement accuracy with thermo sensor: +/- 1 % or 1 °C

Storage temperature: 0 °C up to 50 °C

Emission value: 0,95 adjustable 0.1 up to 1

Resolution: 0.1 °C

Response time: 1 s

Distance to Spot (DTS=measurement dot size): 12:1

Dimensions: 48.8 x 132.7 x 146.0 mm

Weight: 221.8 g

Properties

Measuring range with touch-free measurement from -60 °C to

+500 °C

Measuring range with optional K-Type sensor from -64 °C to

+1400 °C

Note

• Complies with the requirements of the valid European and

national guidelines EN 60825-1, EN 61001; 6-3:2001, EN

631000; 6-1:2001

Article

No.

Article

Designation

PU

Piece

059055 Thermo Control with K-Type Sensor 1


010525 Micro Battery LR03 2

K-Type Sensor Measuring Range -50°C to 200°C 1

Nylon Storage Bag 1

V1.

7.6.

5/IN

T_P_

MP1

10/5

/12-

08-1

7/#7

8018

3[61

6275

]

4.34

Mechanical measuring equipment

Quality Measuring Tools for Metal Processing

Scribers

Properties

With hard metal marking-out tops, scribe case mechanics with

aluminium case

Scriber Straight/Bent

Scriber Event Mechanics

Scriber with hard metal clip

Article

No.

Article

Designation

Length

mm

PU

Piece

169083 Scribe Mechanics Case 150 1

169085 Scriber with Carbide Clip 150 1

133398 Scriber steel straight / curved needle-Ø 4 mm 250 1


169084 Substitute needle case mechanics 1

Angled Stop

Properties

Zinc coated design

Article

No.

Article

Designation

Length

mm

Width

mm

PU

Piece

133368 Angled Stop 150 100 1

133369 Angled Stop 200 130 1

133371 Angled Stop 300 180 1

Precision Workshop Angle

Properties

Fine sharpened testing surfaces, special steel with stop

square, according to DIN 875/II

Article

No.

Article

Designation

Length

mm

Width

mm

PU

Piece

133365 Precision Workshop Angle 100 70 1




V1.7.6.5/IN

T_P_

MP140/1/11-09-16/#743562[743544]

4.35


Precision-Bevelled Steel Square

Application

• Tests are according to the splitting methods of the light

Properties

Low profile, stainless steel, hardened and finely polished,

according to DIN 875/00

Article

No.

Article

Designation

Length

mm

Width

mm

PU

Piece

133372 Precision-Bevelled Steel Square 100 70 1

Miter Square

Properties

With 135° angle, testing surfaces and fine shaped side

surfaces, with stop, according to DIN 875/II

Article

No.

Article

Designation

Length

mm

Width

mm

PU

Piece

133389 Miter Square 150 100 1

Flange Angle

Application

• Alignment of the flanges

Properties

Galvanized design, testing surfaces and fine sharpened faces

Article

No.

Article

Designation

Length

mm

Width

mm

PU

Piece

133390 Flange Angle 400 400 1

Sliding Steel Bevel

Properties

3 part, with winged nut, zinc coated, plant surfaces and

polished sides, special steel, chrome finish

Article

No.

Article

Designation

Length

mm

PU

Piece

133394 Sliding Steel Bevel 200 1

133395 Sliding Steel Bevel 300 1

V1.

7.6.

5/IN

T_P_

MP1

40/1

/11-

09-1

6/#7

4356

2[74

3544

]

4.36


Precision Protractor

Properties

Measuring range 0° – 180°, line scale with

1° graduation, scale finish in satin chrome,

with locking screw, special steel with chrome finish

Article

No.

Article

Designation

Protractor

mm

Length

mm

PU

Piece

133385 Precision Protractor 120 150 1

133386 Precision Protractor 150 200 1

High-Precision Spring Divider

Properties

With square axle stub, chromed with a quick release nut and

hardened tips.

Article

No.

Article

Designation

Length

mm

PU

Piece

133355 High-Precision Spring Divider 200 1

133356 High-Precision Spring Divider 300 1

Precision Marking Gauges

Properties

Flat design, tempered with mm-graduation, hardened marking-

out edge, matt chrome

stainless steel rail, with vernier reading of 0.10 mm

Article

No.

Article

Designation

Measuring range

mm

PU

Piece

133397 Precision Marking Gauges 200 1

Steel Rules

Properties

Stainless steel, flexible steel, top division 1 / 2 mm, lower edge

1/1 mm, according to DIN ISO 2768m/EG II

Article

No.

Article

Designation

Length

m

PU

Piece

133379 Measuring Rules 0,3 1

133380 Measuring Rules 0,5 1

133381 Measuring Rules 1 1

V1.7.6.5/IN

T_P_

MP140/1/11-09-16/#743562[743544]

4.37


Feeler GaugesApplication

• Measurement of valve clearance, spark gap with spark plugs

Feeler Gauge

With bracket and chain

Properties

With brackets and cast-on plastic handle

Article

No.

Article

Designation

PU

Piece

292656 Feeler Gauge 1

Content Measuring range

mm

Amount

283045 Feeler Gauge 0,05 1












Feeler Gauge Fans

Delivery amount

• Product number 69 868 with 13 sheet gauges:

0.05 - 0.1 - 0.15 to 0.2 - 0.25 - 0.3 -

0.4 to 0.5 - 0.6 - 0.7 to 0.8 - 0.9 - 1.0 mm

• Model 69 850 with 5 sheets of gauges: 0.1 - 0.2 - 0.25 - 0.3 -

0.4 mm

Article

No.

Article

Designation

Measuring

range

mm

PU

Piece

069868 Feeler Gauge 0,05 - 1 1

069850 Feeler Gauge 0,1 - 0,4 1

V1.

7.6.

5/IN

T_P_

MP1

40/2

/12-

08-1

7/#7

8020

4[10

6632

]

4.38


Vernier Caliper

Digital Vernier Caliper

Technical data

Resolution: 0.01 mm

Measuring accuracy: 0.02 mm

Properties

With data output RS 232C, stainless steel, hardened design,

LCD display, "0" setting status is

possible at any position, in accordance with DIN 862

Delivery amount

• Digital vernier caliper in a plastic box

• 1 button cell V76PX (product no. 169448)

Article

No.

Article

Designation

Meßbereich

mm

PU

Piece

169091 Digital Vernier Caliper 150 1

High-Precision Pocket Vernier Caliper

Application

• Interior, exterior, depth and height measurements

Technical data

Measuring jaws: 40 mm

Properties

Stainless steel and hardened, vernier and main part chrome

matt, in accordance with DIN 862

With locking screw

With torque determination

Article

No.

Article

Designation

Measuring

range

mm

Vernier

gauge

mm

PU

Piece

161691 Pocket Vernier Caliper,

with Torque

Determination

150 0,05 1

133376 Pocket Vernier Caliper,

with Locking Screw

150 0,05 1

High-Precision Depth Vernier Caliper

Properties

Caliper with locking screw, stainless steel, hardened and

precision-ground, according to DIN 861

Article

No.

Article

Designation

Measuring

range

mm

Vernier

caliper

mm

PU

Piece

133375 High-Precision Depth

Vernier Caliper

200 0,05 1 V1.7.6.5/IN

T_P_

MP140/3/12-08-17/#743515[83711]

4.39


Workshop Venier Calipers

Properties

Stainless hardened steel, with locking screw, chromed scale

and vernier, in accordance with DIN 862

Delivery amount

• Workshop caliper

• Wooden box

Article

No.

Article

Designation

Measuring

range

mm

Vernier

gauge

mm

PU

Piece

133373 Workshop Venier Calipers 300 0,05 1

Vernier Calipers for Brake Disks

Application

• Used for measuring the thickness of brake disks whilst being

installed

Technical data

Measuring of side length: 80 mm

Total length: 215 mm

Article

No.

Article

Designation

Measuring

range

mm

Vernier

gauge

mm

PU

Piece

006656 Vernier Caliper for Brake

Disk

60 0,1 1

Calipers for Brake Drums

Technical data

Vernier caliper length: 150 mm

Internal measuring range: 50 – 500 mm

External measuring range: 0 – 500 mm

Article

No.

Article

Designation

Measuring

range

mm

PU

Piece

141685 Calipers for Brake Drums 500 1

Exterior Micrometer

Technical data

Thread pitch: 0.5 mm

Reading meter drum: Ø 18 mm

Reading meter: 0.01 mm

Properties

Measuring drum and hull dull chromium-plated, measuring

surfaces, fitted with hard metal , in accordance with DIN 86

Delivery amount

• Wooden box

Article

No.

Article

Designation

Measuring range

mm

PU

Piece

126896 Exterior Micrometer 0 - 25 1

133374 Exterior Micrometer 25 - 50 1

V1.

7.6.

5/IN

T_P_

MP1

40/3

/12-

08-1

7/#7

4351

5[83

711]

4.40

Miscellaneous

Funnel

Tinplate Funnel

Application

• Used in industry and workshops

Product advantages

• Oil-, gasoline- and acid-proof

• Flexible metal outlet with thread

• Replaceable, fine screens made of brass

• High overflow rim serves as splash protection

Technical data

Material: tinplate

Length of outlet pipe: 300 mm

Discharge-Ø: 18 mm

Article

No.

Article

Designation

Funnel-Ø

mm

Capacity l PU

Piece

141649 Funnel 160 1,2 1

141650 Funnel 200 3,2 1

Plastic Funnel Straight

Product advantages

• Break-safe polyethylene

• Oil-, gasoline- and chemicals-resistant


Article

No.

Article

Designation

Funnel-Ø

mm

PU

Piece

741523 Funnel 100 1

741531 Funnel 200 1

Plastic Funnel Angled

Product advantages

• Break-safe polyethylene

• Oil-, gasoline- and chemicals-resistant


Article

No.

Article

Designation

Funnel-Ø

mm

Capacity l PU

Piece

141651 Funnel 160 1,3 1

V1.7.6.5/IN

T_P_

MP150/1/12-08-17/#780223[38455]

4.41

Miscellaneous

Refilling- / Metering Containers

Refill Bottle

Application

• Refilling battery water

Product advantages

• Clean — no leakage hanks to pressure cap

Properties

Stable plastic design with handle

Article

No.

Article

Designation

Bottle

Capacity l

PU

Piece

145893 Battery Water Refilling Bottle 2,0 1

Spares PU

149935 Spout for refill bottle 1

Workshop Oil Cup

Product advantages

• Polyethylene containers

• Double brass pump

• Spray aluminum tube, length: 165 mm

Article

No.

Article

Designation

Capacity l PU

Piece

099982 Workshop Oil Cup with Double Oil Pump 0,3 1

Oil Can

Properties

Metal

Article

No.

Article

Designation

Capacity l PU

Piece

069949 Metal Oil Can 0,25 1

Oiler

Properties

Plastic

Article

No.

Article

Designation

Capacity l PU

Piece

069957 Plastic Design 0,16 1

V1.

7.6.

5/IN

T_P_

MP1

50/2

/12-

08-1

7/#7

8022

8[38

519]

4.42

Miscellaneous

Marking Tools and Accessories

Marking and Labeling Set ProfessionalMarker

Application

• Marking of practically any material, dry or wet

• Graphite lead: wood, paper, cardboard

• Wax lead: metal, plastic, glass, brick, tile, rubber, ceramics,

concrete

Product advantages

• Handy size, fits in a shirt pocket and is always

readily at hand

• Extremely robust: the 5 mm lead of the pen does not break,

even when being dropped

• No-smeared hands, as lead is optimally positiioned and can

be adjusted at the push of a button

• Wax leads practically insoluble in water but markings can be

removed through wiping

Delivery amount

• Set: 2 marking pens, 5 graphite leads, 5 yellow wax leads

and 5 red wax leads

Article

No.

Article

Designation

PU

Piece

017343 Marking and Labeling Set Professional Marker 1


023296 Graphite Lead Set (5 pieces) 1

023295 Wax Lead Set (5 pieces), yellow 1

023294 Wax Lead Set (5 pieces), red 1

028911 Professional Marker Pencil 1

V1.7.6.5/IN

T_P_

MP150/3/12-08-17/#780234[59320]

4.43

Miscellaneous

Marking Chalk

Application

• Marks metal, stone, concrete, wood and cardboard

Properties

Available in 4 colors, heat resistant, 11 cm long lead, practical

case holder with mechanics

Note

• Can be washed out of textiles with water

Article

No.

Article

Designation

Color PU

Piece

082495 Marking Chalk white 12

082599 Marking Chalk yellow 12

082644 Marking Chalk blue 12

082735 Marking Chalk red 12


083871 Holder for Marking Chalk 1

Carpenter Pencil

Properties

Handy pencil with hard, flat lead

V1.

7.6.

5/IN

T_P_

MP1

50/3

/12-

08-1

7/#7

8023

4[59

320]

4.44

Miscellaneous

Calibrated Vessel

Measuring Cup 1

Properties

Break resistant, oil- and acid-proof;, blue grounded ml scale

division, handle and spout

Note

• Graduated scale in 50 ml or 100 ml increments

Article

No.

Article

Designation

Capacity PU

Piece

741469 Measuring Cup 1,0 1




Measuring Cup 2

Properties

Tin plate, oil- and acid-proof, available with flexible spout or

funnel outlet

Article

No.

Article

Designation

Capacity I PU

Piece




Measuring Cup 3

Properties

Tin plate, oil- and acid-proof, available with flexible spout or

funnel outlet

Article

No.

Article

Designation

Capacity

l

PU

Piece



V1.7.6.5/IN

T_P_

MP150/4/12-08-17/#780216[38441]

4.45

Miscellaneous

Measuring Cup

Properties

Break-resistant, oil- and gasoline-proof, scale-division, funnel-

shaped spout with flexible spout hose

Note

• Scale divisions in 250 mm or 500 mm increments

Article

No.

Article

Designation

Capacity I PU

Piece




Measuring Cup

Properties

Tin-plated, funnel outlet, only for oil, diesel, waste oil

Note

• Not suitable for liquids with a flash point below 55 ° C water-

corroding liquids (antifreeze)

Article

No.

Article

Designation

Capacity

l

PU

Piece



Plastic Measuring Bucket

Properties

Plastic PE (polyethylene), white, with stamped internal scaling,

with handle

Article

No.

Article

Designation

Capacity

l

PU

Piece

099792 Plastic Measuring Bucket 10,0

Colored Measuring Cup

Properties

With measuring scale, made of unbreakable plastic, stable

Article

No.

Article

Designation

Capacity l PU

Piece

170735 Colored Measuring Cup 0,4 100



V1.

7.6.

5/IN

T_P_

MP1

50/4

/12-

08-1

7/#7

8021

6[38

441]

4.46

Diagnostic equipment for vehicles Trailer Socket...

Documents

Transcript of Diagnostic equipment for vehicles Trailer Socket...