Device Server Sales-Kit IAG ICOM PM Robin Lin 2013, Q4.
-
Upload
dario-corwin -
Category
Documents
-
view
216 -
download
2
Transcript of Device Server Sales-Kit IAG ICOM PM Robin Lin 2013, Q4.
Device Server Sales-KitDevice Server Sales-Kit
IAG ICOM PMRobin Lin
2013, Q4
Intelligent Automation, Seamless IntegrationIntelligent Automation, Seamless Integration
Application Layer
Service Layer
Network Layer
Sensor Layer
Advantech IoT Product Development FrameworkAdvantech IoT Product Development Framework
Managem
ent
Environment Monitoring
IndustryMonitoring
Building Automation
Intelligent Transport
Public Security
Smart HomeSmart Grid
Scheduling Suite Data AnalysisSCADA Geo. Infor
Data Concentrator
NGNMulti-
Network Integration
ConnectionD
evice
Simplify The Way You ConnectSimplify The Way You Connect
Communication TechnologiesGPRS
3G
Wi-Fi EthernetFiber Optic
Smart ConnectionPenetrate
Vertical Markets
Connect TechnologiesTransportation,
coal mining, smart grid, and IT market
From serial to mobile connectivity , transparent
information
DevelopICOM FCP
Serial
DEVICE CONNECTIVITY
-Device Server-iGateway
iGateway : Device Connection Solution for IoT World
iGateway : Device Connection Solution for IoT World
Application Layer
Service Layer
Network Layer
Sensor Layer
Managem
ent
Environment Monitoring
IndustryMonitoring
Building Automation
Intelligent Transport
Public Security
Smart HomeSmart Grid
Scheduling Suite Data AnalysisSCADA Geo. Infor
Data Concentrator
NGNMulti-
Network Integration
ConnectionD
evice
GPRS IP Gateway
3G IP Gateway
Ethernet Device Server
WLAN Device Server
iGateway Product Portfolio
Serial to Cellular IP Gateway-4-band GPRS support-Accurate & Reliable backup solution(dual-SIM & SD card)-Advanced function (VPN & SMS tunneling)
Serial to Wi-Fi Device Server-802.11 b/g/n standard support-Infrastructure, Ad-Hoc and peer-to-peer mode support
Serial to Ethernet Device Server-Redundant Ethernet/Power input-Flexible and easy to use design-ESD/EFT/isolation protection
Modbus Data Gateway-Modbus RTU/ASCII to Modbus/TCP-Reduntant Ethernet/Power input
Serial to Ethernet Device Server
Serial Device ServerSerial Device Server
EthernetEthernet
EthernetEthernet
Simplify the Complexity
What if You Could…What if You Could…
Quickly and easily replace limited distance serial connection with an anywhere/anytime access– Leverage existing Ethernet and IP networking infrastructure – Access anywhere if there’s network connection– No distance limitations!
RS-232
RS-232
RS-232
Device Server
LAN / WAN
Weakness and ChallengesWeakness and Challenges
Only one Ethernet connection impacts stability
Data Loss according to Ethernet disconnection
Typically serial port will be occupied by dedicated PC/Host
Other PC/Hosts can not share the serial data
PLC RTU
Device Server
Temp:????Pressure:????
Marquee Display
RS-422/485
RS-232
RS-422/485
Barcode Scanner
It all Starts with Our Device ServerIt all Starts with Our Device Server
Device Server is a gateway between serial devices and Ethernet (TCP/IP)
Serial data is encapsulated in IP packets and transported over the network - like a letter in an envelope via the postal service
Dual Ethernet connection for full redundancy solution
Ethernet
RS-232/422/485Serial
Device Server
RS-232/422/485 Serial NetworkEthernet
Panel / Label Printer
ADAM-5000
Primary
Secondary
EKI-152/1522/1524 Hardware OverviewEKI-152/1522/1524 Hardware Overview• Dual 12 ~ 48 Vdc
inputs• Reverse power
polarity protection• Fault relay for
external PLC/controller
• IP30 metal chassis
• Din-rail or wall mount
• Wide operating temperature -10 ~ 60C
• Dual/Redundant 10/100Base-Tx Ethernet ports
• Built-in 1.5KV magnetic isolation protection
• 1/2/4-port RS-232/422/485 software selectable serial ports
• D-Sub9 convert to terminal connector accessory is available
: OPT1-DB9-AE
• Serial ESD protection: 15KV for all signals
• 1KV burst (EFT), 0.5KV surge protection for power inputs
EKI-1528/1526 Hardware OverviewEKI-1528/1526 Hardware Overview
• IP30 metal chassis• Front-end LED display• Wide operating temp. (-10 ~
60C)
• Hardware reset button
• Restore to default• Serial console port
• Supports 110 ~ 240 VAC/VDC power input
• Dual 10/100Base-Tx Ethernet ports for LAN redundancy
• 8/16-port RS-232/422/485 software selectable serial ports
• 15KV ESD protection for all signals
• RJ45 connectors
Advantech Serial Device Server UtilityAdvantech Serial Device Server Utility
Network enable existing COM-port based software For Windows 2000/XP/Vista/7 (both 32/64-bit) Supports up to 4096 virtual COM ports Auto configuring all serial ports by simple clicking Easy setting thru. 3 Steps setup wizard to create Virtual COM port
Serial Device Server Operating ModesSerial Device Server Operating Modes
There are several modes of operation, depending on application requirements
Typical modes are:– TCP server w/ COM redirector (VCOM)– TCP Server (devices polled by host PC)– TCP Client (event driven devices – barcode scanner) – Pair Configuration (Peer-to-Peer: serial extension cord)
Mode: TCP Server w/Redirector (VCOM)Mode: TCP Server w/Redirector (VCOM)
COM port redirection software (included in the utility) is installed on computer
Remote devices are addressed as virtual COM ports Application:
– Legacy PC-based software application
Windows
Native COMPort Driver
Legacy Application Software
Virtual COM Port
Ethernet
Host Computer
EthernetRS-232
DeviceServer
Serial
Mode: TCP Server (Polled)Mode: TCP Server (Polled)
Connection is initiated by the host computer Applications: some OPC servers & IP-aware software
Serial DevicesEthernet
Panel / Label Printer
PAC/PLC
TCP Frame
Marquee Display
Mode: TCP Client (Event Handling)Mode: TCP Client (Event Handling)
Connection is initiated by the Device Server Data destination is specified at Device Server setup Applications: barcode/RFID scanner, GPS receiver, etc.
Serial DevicesEthernet
RFID Scanner
Barcode Scanner
Mode: Pair Connection (Peer to Peer)Mode: Pair Connection (Peer to Peer)
Connection is initiated by either Serial Device Server Application: an RS-232 extension cord,
interconnecting devices over LAN/WAN
Ethernet
RS-232
Device
Server
Device
Server
RS-232
Application: ManufacturingApplication: Manufacturing
Remote PCL programming/diagnostics
Benefits• Time Savings – remote access
from your desktop or laptop (via VPN)• Increased Flexibility – access
any device from any desktop/laptop• Reduced Cost – leverage
existing IP LAN/WAN infrastructure instead of installing dedicated cabling
Ethernet
RS-232
EKI-1521Device Server
Host Computer with COM Port Redirection
Application: 高雄日月光半导体 产线控管Application: 高雄日月光半导体 产线控管 Network enabled barcode scanners
Benefits• Rapid Integration – Quickly
and easily connect disparate devices• Increased Flexibility –
overcome distance limitations of serial devices
Ethernet
EKI-1521Device Server
Host Computer with COM Port RedirectionSupports up to 4096 ports
RS-232
EKI-1521Device Server
RS-232
Application: Taipei MRT PIDSApplication: Taipei MRT PIDS
Benefits• Quick response time (Below 10ms) – Update
information in time and without data lost• Independent operation mode for each port –
Supports to connect various serial devices on site
Control Center
EKI-2741F EKI-2741F
Fiber Fiber (to next station)
RS-422RS-485
Plasma TV
LED Display
EKI-2528
Application solution: Power substationApplication solution: Power substation• Robustness by IEC60870-2-1 conformity.• milliseconds accurate clock synchronization (DCF77, GPS,
IEC60870-5-101/104, NTP)• IEC60870-5-101 to -104, IEC61850 and DNP3
communication standards.• Power 1mS SOE (Sequence Of Event )
Key Selling FeaturesKey Selling Features
High baud rate and extreme data throughput– Ensure the high volume transmission needs– Ex. Batch transfer…etc
Quick response time (below 10ms) for each port– Specially suitable for manufacturing automation and critical
communication– Ex. Gaming machine
SNMP and e-mail alert to report status instantly– SNMP MIB-II for network management– SNMP trap and mail alert for warning status be changed
Key Selling Features (cont’)Key Selling Features (cont’)
Dual Ethernet connection for LAN redundancy– It will switch to backup Ethernet connection automatically
when the major LAN be disconnected
Multi-Access and COM port sharing– Multi hosts can share the COM port data or access the COM
port in sequence
Rich configuration methods– Windows utility, WEB interface, telnet, and serial console
Serial to WiFi Device Server
EKI-135X Hardware OverviewEKI-135X Hardware Overview• Dual 12 ~ 48 Vdc
inputs• Reverse power
polarity protection• Fault relay for
external PLC/controller
• IP30 metal chassis
• Din-rail or wall mount
• Wide operating temperature -10 ~ 55C
• Wi-Fi 802.11b/g
• Serial ports RS-232/422/485 software selectable
• D-Sub9 convert to terminal connector accessory is available
: OPT1-DB9-AE
• Serial ESD protection: 15KV for all signals
• 1KV burst (EFT), 0.5KV surge protection for power inputs
EKI-135x Wireless Device Server w/COM port redirectorEKI-135x Wireless Device Server w/COM port redirector
COM port redirection software is installed on host Remote devices are addressed as a virtual COM port
RS-232/422/485 Serial NetworkEthernet
ADAM-5000Virtual COM port
Temperature Controller
EKI-6311GN
Wireless AP
Application: Remote LED DisplayApplication: Remote LED Display
Benefits• Transparency – No changes
required to RS-232 based display or software
• Cost Savings – Rapid installation
without the need to pull or bury communications cable
Ethernet
RS-232
EKI-1352Device Server
Host Computer with COM Port Redirection
802.11b/g Access Point
Device Server Apps: OEM TelematicsDevice Server Apps: OEM Telematics
Management via local 802.11b wireless
Benefits• Rapid Time to Market – Quickly add
wireless access to any device with a serial port• Time Savings – replace manual record
keeping keeping (fares, mileage, etc.) with automatic download on returning to the depot• Reduced Cost – optimize maintenance
with better access to vehicle performance data
Ethernet EKI-1351
Wireless Device Server
Host Compute
r802.11b/g
Access Point
EKI-6311GN802.11n Wireless AP
EKI-6311GN802.11n Wireless AP
EKI-1352Wireless Device Server
EKI-1352Wireless Device Server
Application: AGV (Automated Guided Vehicle)Application: AGV (Automated Guided Vehicle)
PLC P2P Wireless connectionPLC P2P Wireless connection
Wireless Device Servers 802.11 b/g wireless
connection Virtual Serial Tunnel
– By simple configuration– Wireless connection– No program change
Connect to each moving devices
Wireless Network(Virtual Serial Tunnel)
EKI-1351EKI-1351
EKI-1351
EKI-1351
PLC
PLC
Country: JapanCustomer: Diatrend
Serial to Cellular IP Gateway
Serial to GPRS IP Gateway featureSerial to GPRS IP Gateway feature
CompactCompact and Slim with solid mountingAdvanced
Supports versatile gateway featuresEfficient
Supports various communication interfacesSimplicity
Easy to use software featuresAccurate
High redundancy with dual SIM and SD slots for data bufferingReliability
Robust HW design
Dual Power Inputs (12 to 48 VDC)Reverse Power Polarity ProtectionFault Relay for external PLC/Controller
Dual SIMSD Slot
5 Band GPRS
Serial PortsRS-
232/422/485
Serial ESD Protection: 15KV2KV EFT/Surge protection for Power2KV isolation (EKI-1321)
EKI-132x Hardware OverviewEKI-132x Hardware Overview
10/100/1000
Ethernet
EKI-1321 : 1-portEKI-1322 : 2-port
Operating Temp
-30 to 65°C
Simplicity: Reduced Software Complexity Simplicity: Reduced Software Complexity
Advantech Device Server Utility
Easy Configuration thru Web
3~5 Steps to startup…
INTERNET
Accurate, Highly backup solution Accurate, Highly backup solution
INTERNET
RemoteControlRoom
Ethernet
Ethernet
RS-232 RS-232
ADAM-5510MUNO-2171
TrafficInformation
Display Board
TC BOX
TC BOX
WeatherSensor
Fog Station, Wind Speed, Rainfall
75~921.6K any baud rate setting Dual SIM for communication Redundancy SD card for data buffering…
Modbus Device Server
Overview (Modbus Gateway)Overview (Modbus Gateway)
What is Modbus Gateway• A gateway that converts Modbus/RTU or
Modbus/ASCII to Modbus/TCP
Why use Modbus Gateway• In some situation that SCADA queries
Modbus/TCP data while device only supports Modbus/RTU, we need a Modbus Gateway to do the conversion
• Modbus Gateway extends transmission distance of RTU devices via network connection
Modbus OverviewModbus Overview
Communications protocol introducedin the mid 1970’s by Modicon
Now an open standard with broad vendor support
Most popular industrial protocol world-wide Implementation is master/slave
(client/server) Modbus ASCII
Asynchronous serial (RS-232/422/485) Oldest of implementations
Modbus RTU Asynchronous serial (RS-232/422/485) Most efficient (binary), and most popular
Modbus TCP Ethernet and TCP/IP networks only
Modbus Master
Modbus Slave
Modbus RTU RS-485
http://www.modbus.org
How Do You Bridge the Modbus Gap?How Do You Bridge the Modbus Gap?
Most new equipment is Modbus/TCP Modbus serial and Ethernet versions
not designed to work with each other Large installed bases of Modbus serial
► How do you preserve current investments?
► Is there a way to bridge the old and new?
► What about serial only Modbus devices?
You Need Modbus Gateways !You Need Modbus Gateways !
• Converter of Modbus/TCP and Modbus/RTU, Modbus/ASCII
• Extends transmission distance of RTU devices via network connection
EKI-1221/1222/1224 Hardware OverviewEKI-1221/1222/1224 Hardware Overview• Dual 12 ~ 48 Vdc
inputs• Reverse power
polarity protection• Fault relay for
external PLC/controller
• IP30 metal chassis
• Din-rail or wall mount
• Wide operating temperature -10 ~ 60C
• Dual/Redundant 10/100Base-Tx Ethernet ports
• Built-in 1.5KV magnetic isolation protection
• Serial ports RS-232/422/485 software selectable
• D-Sub9 convert to terminal connector accessory is available
: OPT1-DB9-AE
• Serial ESD protection: 15KV for all signals
• 1KV burst (EFT), 0.5KV surge protection for power inputs
EKI-1221D/1222D Hardware OverviewEKI-1221D/1222D Hardware Overview• Dual 12 ~ 48 Vdc
inputs• Reverse power
polarity protection• Fault relay for
external PLC/controller
• IP30 metal chassis
• Din-rail or wall mount
• Wide operating temperature -10 ~ 60C
• Dual/Redundant 10/100Base-Tx Ethernet ports
• Built-in 1.5KV magnetic isolation protection
• Serial ports RS-232/422/485 software selectable
• D-Sub9 convert to terminal connector accessory is available
: OPT1-DB9-AE
• Serial ESD protection: 15KV for all signals
• 1KV burst (EFT), 0.5KV surge protection for power inputs
• Build-in Ethernet Switch function
FeaturesFeatures
Baud rate from 50 to 921.6K bps Dual Ethernet Port
– Daisy Chain Feature– Auto By-Pass– Multiple TCP Master from different domain– Multiple TCP Slave to different domain
Easy to use– Auto searching slave ID
Dual Power Input
Dual Ethernet RedundancyDual Ethernet Redundancy
Dual connection enables an alternative backup session
RS-232
HMI
Modbus RTU/ASCII Master devices
Modbus/TCP Slave devices
Ethernet #1
Ethernet #2
Dual Ethernet ConnectionDual Ethernet Connection
Multiple TCP master from different domain
Modbus/TCP master devices
Modbus/TCP master devices
Ethernet #1
Ethernet #2
Modbus/RTU Slave device
Dual Ethernet ConnectionDual Ethernet Connection
RTC master to TCP slaves on different domain
Modbus/TCP slave devicesModbus/TCP slave devices
Ethernet #1
Ethernet #2
Modbus/RTU Master device
Easy to UseEasy to Use
Utility will search related slave ID automatically
Host Computer
RS-485
Modbus RTU/ASCII
Slave DevicesID:1 ID:3 ID:4 ID:2
7
Ethernet
Modbus RTU/ASCII Master
EKI-1221/1222/1224 Modbus GatewaysEKI-1221/1222/1224 Modbus Gateways
Integrated hardware/software solutionto connect serial and Ethernet devices Modbus/TCP to Modbus ASCII or RTU Modbus ASCII or RTU to Modbus/TCP
Transparent – no changes required toattached devices/equipment
Preserve installed equipment investments Integrate devices without Ethernet
EKI-1221: 1-portEKI-1222: 2-portEKI-1224: 4-port
Modbus/TCPEthernet
Modbus RTU
RS-485
ModbusGateway
EKI-1221D/122D Modbus Gateways w/ Daisy ChainEKI-1221D/122D Modbus Gateways w/ Daisy Chain
With the same function as EKI-122x Modbus Gateway
Build-in ethernet switch to allow daisy chain connection
EKI-1221D: 1-portEKI-1222D: 2-port
Modbus/TCPEthernet
ModbusGateway
ModbusGateway
Modbus RTU
RS-485
Modbus RTU
RS-485
Key Feature - Daisy-chain ConnectionKey Feature - Daisy-chain Connection
Built-in Ethernet switches to allow Daisy-chain connection
Helping improve scalability Saving wiring cost
legacy
Modbus Gateway Basic Application Scenario
Modbus Gateway Basic Application Scenario
The “Serial” device acts as a slave device that will be polled by
Ethernet Master device.
Daisy-Chain Application ScenarioDaisy-Chain Application Scenario
Benefit Daisy-chain for easy wiring Brain/coupler-less Flexible serial-port selection Multiple mounting methods
Selection Guide
Easy SelectionEasy Selection
How many serial devices to connect? If more than 1 device , how apart are they? Serial tunneling or Modbus Gateway? Wired or Wireless? Panel (Din-rail) or rack-mount configuration?