Device Boxes with the - Hubbell Canada | Manufacturer of...

2
www.hubbell-canada.com/wiring Eliminates short circuits and arc faults caused by over- tightening of metal clamps No screwing needed with the PRESTO™ plastic clamp Increase in usable space No screws or metal clamps interfering while wiring Time saving! Just push the cable through the PRESTO™ clamp and wire as usual! No knockouts to remove. No need for fastening clamp screws The PRESTO™ clamp is resistant to cold temperatures The PRESTO™ clamps are made of engineered resin, tested and approved to perform in cold temperatures Avoid tearing vapor barrier with protruding clamp screws No protruding screws behind the box Ergonomic benefits - less tools to carry Tool-less cable insertion Unique design accommodates rework application Re-usable clamps - Cables can be pulled out of the box, by lifting the interior tab of the clamp with pliers and pulling out the cable at the same time Flexible application A provisional hole allows screwing a Universal metal clamp in the box, if the PRESTO™ clamp is removed Hubbell has listened and delivered. With contractors' input, we have designed and produced the PRESTO™ cable clamp for tradeSELECT™ metal device boxes. This patented self-gripping cable clamp removes any risk of arc fault or short circuit produced by over-tightening clamp screws. Additionally, the clamp design improves the speed and ease of installation. Each PRESTO clamp entry is certified for 1 x NMD cable of 14/2 to 10/2 or 14/3 to 10/3. MADE IN CANADA Step 1 Step 2 Step 3 (Strip the cables if desired, to the needed length) Step 1: Position the cable / wires Step 2: Push cable through clamp to desired length Step 3: If required, adjust cable by pulling on the tab at the center of the clamp with pliers. Easy as 1, 2, 3 Benefits Features Device Boxes with the

Transcript of Device Boxes with the - Hubbell Canada | Manufacturer of...

www.hubbell-canada.com/wiring

Eliminates short circuits and arc faults caused by over-tightening of metal clamps No screwing needed with the PRESTO™ plastic clamp

Increase in usable space No screws or metal clamps interfering while wiring

Time saving! Just push the cable through the PRESTO™ clamp and wire as usual!

No knockouts to remove. No need for fastening clamp screws

The PRESTO™ clamp is resistant to cold temperatures The PRESTO™ clamps are made of engineered resin, tested and approved to perform in cold temperatures

Avoid tearing vapor barrier with protruding clamp screws No protruding screws behind the box

Ergonomic benefits - less tools to carry Tool-less cable insertion

Unique design accommodates rework applicationRe-usable clamps - Cables can be pulled out of the box, by lifting the interior tab of the clamp with pliers and pulling out the cable at the same time

Flexible application A provisional hole allows screwing a Universal metal clamp in the box, if the PRESTO™ clamp is removed

Hubbell has listened and delivered. With contractors' input, we have designed and produced the PRESTO™ cable clamp for tradeSELECT™ metal device boxes. This patented self-gripping cable clamp removes any risk of arc fault or short circuit produced by over-tightening clamp screws. Additionally, the clamp design improves the speed and ease of installation.Each PRESTO clamp entry is certified for 1 x NMD cable of 14/2 to 10/2 or 14/3 to 10/3. MADE IN

CANADA

Step 1 Step 2 Step 3

(Strip the cables if desired, to the needed length) Step 1: Position the cable / wires

Step 2: Push cable through clamp to desired length

Step 3: If required, adjust cable by pulling on the tab at the center of the clamp with pliers.

Easy as 1, 2, 3

Benefits Features

Device Boxes with the

H3380-H3417spaceBoxFinal.indd 1 14/06/2016 11:07:20 AM

www.hubbell-canada.com/wiring

Hubbell Canada LP • Electrical Systems • 870 Brock Road South • Pickering, ON L1W 1Z8 Phone (905) 839-1138 • FAX (905) 839-9108 Printed in Canada. Specifications subject to change without notice. H3380 rev.05/16

1104LHP 1304LHP 1804LHP 1104LRWP(Rework)

2104LLEP** 2304LLEP** 3104LHP

1104LHPU 1304LHPU 1804LHPU 1104LRWPU(Rework)

2104LLEPU** 2304LLEPU** 3104LHPU

Discover some other members of the family!

Part No.Capacity

cubic inch /cubic cm GangableNon-

Gangable

Self-Gripping Cable

Clamps(Qty of Entries)

Universal Cable

Clamps(Qty of Entries)

Master Case Quantity

Dimensions: 2" x 3" x 2-1/2" Deep

1104LHP 12.5 / 204 3 4 50

1104LHPU 12.5 / 204 3 2 2 50

1304LHP 14.5 / 238 3 4 50

1304LHPU 14.5 / 238 3 2 2 50

1804LHP 16 / 262 3 4 40

1804LHPU 16 / 262 3 2 2 40

1104LRWP 12.5 / 204 3 4 40

1104LRWPU 12.5 / 204 3 2 2 40

2104LLEP ** 12.5 / 204 3 4 50

2104LLEPU ** 12.5 / 204 3 2 2 50

2304LLEP ** 14.5 / 238 3 4 50

2304LLEPU ** 14.5 / 238 3 2 2 50

3104LHP 16 / 262 3 4 50

3104LHPU 16 / 262 3 2 2 50

Note: Each PRESTO™ clamp entry is certified for 1 x NMD cable of 14/2 to 10/2 or 14/3 to 10/3.Universal clamps can be used with NMD or AC 14/2 - 8/2 or 14/3 - 8/3 cable.

** Also available in 2 gang and 3 gang models. Contact Hubbell Canada for details.

H3380-H3417spaceBoxFinal.indd 2 14/06/2016 11:07:28 AM