DETAIL A HC2 Coil Connectors · 2020. 8. 25. · Daniel Cetnik Nicholas Avery Daniel Cetnik Pin...
1
A2 SIZE SHEET SCALE 1 OF 1 1:9.09 REVISIONS RELEASED DCN No. 1204 DO NOT SCALE ISSUE 2 DR3342 Outline Drawing DRAWING No ISSUE TITLE DRAWN 2 MODIFIED HC2 DIMENSIONS ARE IN MILLIMETERS COPYRIGHT: THIS DRAWING AND THE INFORMATION CONTAINED THEREIN IS CONFIDENTIAL AND MUST NOT BE REPRODUCED, COPIED OR USED FOR ANY PURPOSE WHATSOEVER WITHOUT THE PRIOR PERMISSION OF BARTINGTON INSTRUMENTS LTD. Arhamis Lazaro THIRD ANGLE PROJECTION LINEAR: XX XX.X XX.XX TOLERANCES FOR MACHINING: (UNLESS OTHERWISE SPECIFIED) ANGULAR: XX XX.X XX.XX u0.5mm u0.2mm u0.1mm u0.5v u0.1v u0.05v SEE DCN NUMBER FOR DESIGN CHANGE HISTORY 24/05/2016 01/04/2015 06/08/2014 TECHNICAL INFORMATION No. OPERATION MANUAL No. DATASHEET No. TI3342 OM3342 DS3342 MECH' CHECK ELEC' CHECK 01/04/2015 PROJECT No USED ON D1319 Daniel Cetnik Nicholas Avery Daniel Cetnik Pin Function 1+ V+ 1- V- 2+ LINK 2- LINK Neutrik NL-4-MP HC2 Coil Connectors 3 HOLES M12 x 1.75 THRU' (4 LOCATIONS) 109 HOLES M8 x 1.25 THRU' 35.0 TYP 70.0 TYP 35.0 TYP 215.0 TYP 207.5 TYP 212.5 TYP 232.5 TYP HC2 TABLE (PLAN VIEW) R 20 TYP X Y Z AXIS ORIENTATION (POSITIVE) 495 q HOLES USED FOR ASSEMBLY 1226 1226 613.0 351.4 * R 150 TYP X Y Z 622 = = 1136 572.6 = = *DISTANCE TO TABLE FROM BASE 261.6 523.2 = = A DETAIL A 27.9 2 VIEW SHOWING COIL BRACKET PROTRUDING INTO COIL APERTURE
Transcript of DETAIL A HC2 Coil Connectors · 2020. 8. 25. · Daniel Cetnik Nicholas Avery Daniel Cetnik Pin...
-
A2SIZESHEET SCALE1 OF 1 1:9.09 REVISIONS
RELEASED
DCN No.
1204
DO NOT SCALE ISSUE
2
DR3342
Outline Drawing
DRAWING No ISSUE
TITLE
DRAWN
2
MODIFIED
HC2
DIMENSIONS ARE IN MILLIMETERS
COPYRIGHT: THIS DRAWING AND THE INFORMATIONCONTAINED THEREIN IS CONFIDENTIAL AND MUSTNOT BE REPRODUCED, COPIED OR USED FOR ANY
PURPOSE WHATSOEVER WITHOUT THE PRIORPERMISSION OF BARTINGTON INSTRUMENTS LTD.
Arhamis LazaroTHIRD ANGLEPROJECTION
LINEAR:XXXX.X XX.XX
TOLERANCES FOR MACHINING:(UNLESS OTHERWISE SPECIFIED)
ANGULAR:XXXX.X XX.XX
u0.5mmu0.2mmu0.1mm
u0.5vu0.1vu0.05v
SEE DCN NUMBERFOR DESIGNCHANGE HISTORY
24/05/2016
01/04/2015
06/08/2014
TECHNICAL INFORMATION No.
OPERATION MANUAL No.
DATASHEET No.
TI3342
OM3342
DS3342
MECH' CHECK
ELEC' CHECK 01/04/2015
PROJECT NoUSED ON
D1319
Daniel Cetnik
Nicholas Avery
Daniel Cetnik
Pin Function
1+ V+
1- V-
2+ LINK
2- LINK
Neutrik NL-4-MP
HC2 Coil Connectors
3 HOLES M12 x 1.75 THRU'(4 LOCATIONS)
109 HOLES M8 x 1.25 THRU'
35.0
TY
P
70.0TYP 35.0TYP
215.
0T
YP
207.
5T
YP
212.5 TYP
232.5 TYP
HC2 TABLE (PLAN VIEW)
R 20TYPX
Y
Z
AXIS ORIENTATION (POSITIVE)
495q
HOLES USEDFOR ASSEMBLY
1226
1226
613.
0
351.
4*
R 150TYP
X
Y
Z
622
==
1136
572.6= =
*DISTANCE TO TABLE FROM BASE
261.
6
523.
2=
=
A
DETAIL A
27.9
2
VIEW SHOWING COILBRACKET PROTRUDINGINTO COIL APERTURE
