Design Technology Documented Evidence
5
Model Design For this project, I designed a ceiling lamp in the shape of da Vinci’s flying machine. Above is the original design from the internet and I originally used this to help me make my final design in google sketch (pic below) but since this is much clearer, I will use this to guide me through out the process of making this model instead. nnn This week I started to make the product. The first few steps are just to collect materials and measure how much I need before cutting them. Those part were easy enough but it took up so much time that I almost spent the whole week doing it. Since it was also my first Design Technology class, I find it a bit hard to use the machines but after the first week it gets much easier to operate properly. At this point I’m a little bit behind on my schedule because I underestimated this step. D OCUMENTED Evidence the P A R T O N E Friday, November 25, 2011
-
Upload
annisa-leialohilani -
Category
Documents
-
view
223 -
download
0
description
The process of making my DT product
Transcript of Design Technology Documented Evidence
Model Design For this project, I designed a
ceiling lamp in the shape of da Vinci’s flying machine. Above is
the original design from the internet and I originally used this to help me make my final
design in google sketch (pic below) but since this is much
clearer, I will use this to guide me through out the process of making this model instead.
nnn
This week I started to make the product. The first few steps are just to collect materials and
measure how much I need before cutting them. Those part were easy enough but it took up so much time that I almost spent the whole week
doing it.
Since it was also my first Design Technology class, I find it a bit hard to use the machines but after the first week it gets much easier to operate properly. At this point I’m a little bit behind on my schedule because I underestimated this step.
DOCUMENTEDEvidencethe
P A R T O N E
Friday, November 25, 2011
Friday, November 25, 2011
P A R T T H R E E
That’s me sanding down one of the round parts for
the frame
And that’s me and Gavin after he asked me what the heck am I doing
sanding them when he’s the one who told me to do
it in the first place
She’s gluing all the parts
together
CONTINUING THE FRAME
THIS WEEK I AM COMPLETING THE MAIN FRAME WITH THE EXTRA PARTS SUCH AS
THE WHEELS FOR EACH SIDE OF THE FRAME AND TWO OTHER ONES ON TOP FOR
SUPPORTING THE WINGS.
I ALSO MADE A COUPLE MORE PARTS FROM DOWELING FOR SUPPORTING THE WINGS
AND SMOOTH THEM WITH SAND PAPER BEFORE STICKING THEM IN. AT THIS POINT I
AM BACK ON TRACK ON MY TIME LINE BECAUSE MAKING THE SMALL PIECES ARE
APPARENTLY MUCH FASTER THAN THE MAIN FRAME.
Friday, November 25, 2011
For this couple of lessons, I made a pair of wings and tail for the plane. I drew
the shapes on a piece of cardboard and cut it out using scissors which I find a
bit hard to do.
Next week, I want to start painting my product!
DocumentedEvidence P A R T F O U R
Friday, November 25, 2011
D O C U M E N T E D E V I D E N C E
PART FIVEPainting
This week, I managed t o paint the whole model for only two lessons. At first I paint it with light brown that looks awful but then I changed the color to a darker shade even though I personally think it looks better not painted at all and the best
part, I’m finished just in time!Uno took these picture of m
e
painting the model and
gluing back the wings after it
fell off
Friday, November 25, 2011
