Design task 2Design and Technology

Step one Step two

Step three

Select Create a Drawing Click on A4 and Finish

You are ready to start

Design task 2

Tool bar

Menu’sMenuColour/Effects

View option

Design task 2Draw and write down the function of each tool in the tool bar. This will help you with learning how to use Serif.

Design task 2Design and Technology

In this task you will learn how to:

• use the quick shapes tool

• draw freehand

• layer objects

• rotate objects

• create a graphic drawing of a dragon

Design task 2

2. Repeat the process until you get an eye ball. Each circle needs to get smaller. Use the Fill Tool to add colour

1. Firstly, draw a circle using the shape tool in the quick shape box

Design task 2

4. To arrange the head underneath the eye, use the top toolbar – click on arrange > order objects > send to back.

3. Use the freehand drawing tool to create the top of the dragon’s head (the shape of the head is drawn like a chicken drumstick.) Then colour/fill this in using either red or an effect of your choice.

Design task 2

6. Draw a circle for the nostril placing this on the end of the dragon nose.

5. Use the freehand drawing tool to create the top of the dragon’s nose (drawn like a sausage) Then colour/fill this using either dark red or an effect available in SerifDraw.

Design task 2Design and Technology

8. Draw a tooth, then copy and paste to create a full set of teeth.

7. Use the freehand drawing tool to create the gums. A sausage shape again. Arrange the gums in place and send to back.

Design task 2

10. Draw the bottom of the jaw, using the freehand tool, something similar to the shape a pipe.

9. Copy and paste the row of teeth and turn them upside down using the rotate tool.

Design task 2

11. Add further detail for example horns, neck and tongue to achieve the final appearance of the dragon.

Design task 2

Task

Print your Dragon off and stick it in the space…..just like above