DESIGN, PROJECT STRATEGY AND INNOVATION Interior ... Documents/Interior... · Interior design...
Transcript of DESIGN, PROJECT STRATEGY AND INNOVATION Interior ... Documents/Interior... · Interior design...
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
The Interior Guidelines Mission is to promote interiors conducive to healing and science through the application of a consistent vocabulary of timeless and sophisticated materials, finishes, and visible design elements which evoke a sense of well-being for our patients, families and staff.
MISSION STATEMENT
JANUARY 2018 INTRODUCTION
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
GUIDELINES
GUIDELINES GOALS• Create a universal and scalable approach to the design of NYP facilities that is highly functional,
durable and aesthetically appropriate with a focus on the NYP brand and the propagation of consistent interiors
• Selected materials and applications that enhance patient and staff safety • Balance the need to respect strongly-held individual preferences by consistently applying
institutional standards• Build an efficient design process by specifying proven products, with the potential of shortening
project schedules and added durability.• Provide for greater project budget control by anticipating costs related to interior projects
REGULATORY AND CODE COMPLIANCE• Local and state building codes• Life Safety and NFPA• FGI standards for Outpatient Facilities, including Planning, Design Construction and
Commissioning• IESNA RP 29 – Lighting for Hospitals and Healthcare Facilities• All applicable to the program usage
NEW YORK PRESBYTERIAN - LIFE SAFETY GUIDELINES• Interior wall and ceiling finishes, including exposed interior surfaces of buildings such as fixed
or movable walls, partitions and columns have a flame spread rating of Class A. (NFPA 101 2012 10.2, 18.3.3.1, 18.3.3.2)
‒ The reduction in class of interior finish for a sprinkler system as prescribed in 10.2.8.1 is permitted. Class B interior wall and ceiling finish materials shall be permitted in any location where Class A is required.
‒ Individual rooms not exceeding four persons may have a Class A or B finish. (18.3.3.2.1) ‒ Lower half of corridor walls, not exceeding 4 feet in height, may have a Class A or B flame
spread rating. (18.3.3.2.2)• Interior floor finishes shall comply with 10.2. Floor finishes in exit enclosures and exit access
corridors and spaces not separated by walls that resist the passage of smoke shall be Class I or II. (NFPA 101 2012 18.3.3.3.1, 18.3.3.3.2, 18.3.3.3.3, 10.2, 10.2.7.1, 10.2.7.2)
JANUARY 2018 INTRODUCTION
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
DESIGN, PROJECT STRATEGY AND INNOVATION TEAM
TEAM GOALS• Meet the quality and aesthetic goals of NYP Senior Leadership• Document and deploy enterprise-wide guidelines for architectural materials and finishes • Support capital project teams achieve institutional design goals design document reviews and
materials and finishes consultations • Support the F.A.C.E. program with interior design and furniture specifications • Support the Direct Project and Facilities Project Requests(F.P.R.) program with interior design
and furniture specification when a design consultant is not engaged • Oversee the enterprise-wide art program through the curation of new pieces that meet Dr.
Corwin’s vision for a cohesive, contemporary and valuable collection
PROCESSInterior Design Guidelines The Guidelines are foundational to NYP’s consistent approach to interiors and include:• Materials and finishes with proven durability and enhanced lifecycle in order to maintain a
State of Good Repair• Universal and scalable selections based upon project type and budget• Furniture selected for ease of maintenance, durability and appropriate ergonomic featuresTeam Responsibilities:• Research, document and deploy Interior Guidelines of Materials and Finishes and Furniture
Guidelines • In-Service to NYP teams• Orientation of new architectural design consultants to the Guidelines program• Collaboration with NYP Procurement on furniture dealer issues and contracts• Collaboration on campus wide Master Paint Plan initiatives• Collaboration with other internal subject matter experts such as Epidemiology, Safety, Facilities
Operations, EVS on the Guidelines selections
CAPITAL PROJECTSAll projects other than infrastructure are reviewed by the team at each phase as a cross check for compliance to the Guidelines • Review of feasibility reports, SD, DD, CD and millwork shop drawings • Review of Materials and Finishes are managed through team meetings with the FDC PM and
design team. • FF+E close-outs – the team is responsible for assessing that FF+E documentation meets the
close-out requirements• On-going design support and documentation review of Major Capital • Recommends design consultant selections based upon project scope to FDC Directors• Responsible for the interior design integration of Regional Hospitals and Medical Group
JANUARY 2018 INTRODUCTION
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
DESIGN, PROJECT STRATEGY AND INNOVATION TEAM F.A.C.E.Interior design services for all projects including patient room refurbishments and special projects at all campuses. Team responsibilities include:• Programming client needs• Space planning, floor plans• Selection of materials, finishes and furniture• Review of the architectural documentation provided by the F.A.C.E. team
FURNITURE, DIRECT PROJECTS AND FACILITIES PROJECT REQUEST (F.P.R. program)Interior design services for all Direct and F.P.R. projects that have a design component. These projects can range in complexity from a simple task chair replacement to the design and specification of the Milstein lobby furniture package. Team responsibilities include:• Selection of materials and finishes for F.O. managed projects• Approximately $2M is spent year over year on these furniture purchases
ART PROGRAMOversee of the art selection process, responsibilities include:• Consistently apply Dr. Corwin’s vision for contemporary art urchases to grow the NYP collection.• Project liaison to Donors and Trustees, including design, art and Signage review and approvals.• Recommend the art consultants that are in line with the project scope and budget.• Review selections to ensure alignment with Hospital’s vision for art in public spaces.• Review selections for alignment with budget.• Management of the - Art Inventory Tracking program.
JANUARY 2018 INTRODUCTION
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
JANUARY 2018 INTRODUCTION
New York Presbyterian | Interior Guidelines - Furniture | Appendix
169Reissued: September 15, 2011
Project Name
ItemProduct Name
model Number
Description
FinishesColor Name/Number
material size
Installation method
manufacturer
local Contact/Phone
Email Address
ItemProduct Name
model Number
Description
FinishesColor Name/Number
material size
Installation method
manufacturer
local Contact/Phone
Email Address
Special Instructions1. see finish plans for locations.
Finish Specifications
Project location
NYP Project #
material Type
Architects Tag
Room Name/Room #
New York Presbyterian | Interior Guidelines - Furniture | Appendix
170 Reissued: September 15, 2011
Project Name
ItemProduct Name
model Number
Description
FinishesTrim
Frame
misc. Features
manufacturer
local Contact/Phone
Email Address
UpholsteryName
Number
Color
Content
Durability
Finish/Backing
Cleaning Code
manufacturer
local Contact/Phone
Email Address
Special Instructions1. submit (2) current finish samples for all items to architect for approval prior to fabrication.2. manufacturer/ Dealer to submit in writing any deviation to above specification.3. see furniture plans for quantities.4. All furniture must be tagged with room number locations.5. All fabric must be backed according to manufacturers recommendations.7. Dealer is responsible to confirm, extend or establish fabric reserve in appropriate quantities.8. Dealer is responsible to verify model numbers.
Furniture Specifications
Project location
NYP Project #
Furniture Type
Architects Tag
Room Name/Room #
https://enet.nyp.org/sites/facilities/default.aspx
• The NYP Interior Guidelines for Finishes as well as Furniture an be found on the NYP Facilities portal along with the record sheet formats.
Finishes and Furniture Record Sheets templates.
Completed record sheets are part of the mandatory Project Closeout phase and are to be submitted through Unifier to the FDC Project Manager.
DOCUMENTATION | Furniture and Finishes Record Templates
DESCRIPTION NOTES
Finishes Record Sheet Format Furniture Record Sheet Format
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
TABLE OF CONTENTS
JANUARY 2018 INTRODUCTION
REFERENCE PROJECTS 1Building LobbiesDepartment ReceptionClinical CorridorsNurse StationIn-Patient BedroomsEmergency DepartmentExam RoomDiagnostic/Treatment Rooms/Operating RoomsAdministrative Offices and ConferencingRestroomsHolding and Storage Rooms
CEILINGS 2Acoustical Tile - Armstrong
DOORS & FRAMES 3High Impact Doors - Masonite
FLOORING & TILE 4Vinyl Tile - Armstrong ExcelonSolid Vinyl Tile - Johnsonite Cortina GrandeSolid Vinyl Tile - Johnsonite GemstoneLuxury Vinyl Tile Faux Wood - VariousLuxury Vinyl Tile Faux Texture - VariousLuxury Vinyl Tile Faux Stone - VariousHomogeneous/Heterogeneous Sheet - VariousPoured and Tile Terrazzo - VariousLobby Porcelain Tile - VariousUtility Room Tile - ProspecRestroom Warm PaletteRestroom Cool Palette
WALLS - PROTECTION/FINISHES/TILE 5Paint Palette - AdultPaint Palette - PEDSWall Protection - Pawling Wall Protection - Construction SpecialtiesWall Base - JohnsoniteWall Coverings/Wall Panels - VariousSolid Surface - CorianThin Porcelain Tile - VariousArchitectural Glass - VariousDecorative Stone Walls - VariousThermoplastic Sheet - VariousHigh Pressure Laminate - VariousDrywall Projection Molding - Gordon InteriorsBed Locater - Wittrock HealthcareHand Sanitizer Back Panel - custom
MILLWORK AND CASEWORK 6High Pressure Laminate - VariousSolid Surface - VariousLaboratory/Pharmacy - VariousMockett - Storage DrawerMillwork - General Details
HARDWARE 7Pull Out Bins - HafeleTrash Chute - Arch HardwareWaste Chute - KarranRecessed Cabinet Pull - HafeleRecessed Cabinet Pull - SchwinnAmenity Grab Bar - WingItsAmenity Coat Hook - WingItsCoat hook - ASIMulti Coat Hooks - GlaroMulti Coat Hooks - SafcoCounter Leg - MockettCounter Post - MockettCounter Bracket Flush - RakksCounter Bracket Surface - RakksShelf Supports - HafeleCabinet Locks - CompXWire Management - MockettGrommet - MockettTrim Protector Bar - Assa AbloyTrim Protector Bar - Keedex Wall Mounted Door stop - Assa AbloySecurity Hangers - MagnussonCoat Rack - Magnusson
SHADES & CURTAINS 8Cubicle Curtains - Maharam/C-SWindow Shades - Mechoshade PLUMBING - TOILET AND BATH 9Handwash Sinks - KarranToilet Partitions - VariousFolding Shower Seat - ASIFolding Shower Seat - HewiBed Pan Holder - VenduraAmenity Shower Shelf - GingerAccessory Shelf - ASIDispensers and Containers - ASI/Bobrick Hand Dryer - DysonSink Trap Cover - ZurnChanging Table - KoalaKare
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
The images on the following pages illustrate an aesthetic that is representative of the NYP approach to interior design. They communicate the timeless and sophisticated corporate brand of Patients First, Quality and Safety.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
David Koch Center
Building Lobbies
CUMC Adult Emergency
Lower Manhattan William Street CUMC Heart Center
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
Building Lobbies Dura
bilit
y
Cost
($’s
rela
tive
to c
ateg
ory)
Mai
nten
ance
Aest
hetic
s
Life
cycl
e Co
st
WallsPaint e $ e e e
3MM porcelain panels w/ stainless steel trim l $$ l l l
Thermo foil/Phenolic panels w/stainless steel trim 8 $$ 8 8 8
Glass panel with metal trim e $$$ e l e
Stone tiles/panels l $$$ l l l
CeilingsGWB ceilings 8 $ 8 8 8
Acoustical tile l $ 8 e 8
Decoustics or other specialty ceilings e $$$ e l e
Armstrong Metalworks tile l $$ l 8 8
Desk and Millwork Solid surface or Engineered Stone l $$ l l l
Natural Stone l $$$ l l l
Floor/Wall BaseFloorazzo/Floorazzo, Nurazzo/Nurazzo l $$ l l l
Porcelain Tile/Tile l $$ l l l
Terrazzo/Terrazzo l $$$$ l l l
Stone/Stone l $$$$ l l l
Stainless Steel Wall base e $$ e 8 e
Solid Surface Base Option (for glass or tile walls) 8 $$ 8 8 8
NOTE: materials other than those listed above will require an Interiors Team review during the Feasibility phase to insure compliance to the Guidelines and compatibility to the budget.
KEYPoor e
Good 8 Excellent l
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
Department Reception
WCMC Starr 3 Hematology Oncology WCMW Petrie Women’s Imaging
ACN - Center for Special Studies - Outpatient, off siteCUMC Eye Clinic
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
Department Reception Dura
bilit
y
Cost
(rel
ative
to c
ateg
ory)
Mai
nten
ance
Aest
hetic
s
Life
cycl
e Co
st
WallsPaint w/plastic rub strip e $ e e e
Paint w/stainless steel bumper 8 $ 8 e 8
Wall covering or acoustic panels e $$ 8 l 8
Stainless steel corner guards/end caps 8 $$ 8 8 8
Accent Walls3MM porcelain panels l $$ l l l
Thermo foil/Phenolic accent wall 8 $$ 8 8 8
Glass panels with metal trim 8 $$$ e l l
Stone tiles/panels l $$$ l l l
CeilingsGWB ceilings 8 $ 8 8 8
Acoustical tile l $ 8 e 8
Decoustics or other specialty ceilings e $$$ e l e
Armstrong Metalworks tile l $$ l 8 l
Desk Solid surface or Engineered Stone l $$ l l l
Natural Stone l $$$ l l l
FloorVinyl tile (VCT), rubber base e e e e e
Luxury Vinyl Tile/Vinyl Enhanced Tile (VET), rubber base 8 $$ 8 8 8
Porcelain Tile/Tile l $$$ 8 8 8
Nurazzo or Floorazzo, coordinating base l $$$$ l l l
Stainless Steel wall base option e $$ e 8 e
Solid Surface Base Option (for glass or tile walls) 8 $$ 8 8 8
DoorsHollow metal doors and frames 8 $ e e e
PVC skin, high impact edge l $$ l l l
Architectural metal and glass l $$$ l l l
NOTE: materials other than those listed above will require an Interiors Team review during the Feasibility phase to insure compliance to the Guidelines and compatibility to the budget.
KEYPoor e
Good 8 Excellent l
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
Lower Manhattan Hospital - Inpatient
Clinical Corridors
ACN - Center for Special Studies - Outpatient, off site
CUMC PEDS HemOnc Outpatient in hospital corridor DHK - Outpatient, off-site
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
Clinical Corridors Dura
bilit
y
Cost
($’s
rela
tive
to c
ateg
ory)
Mai
nten
ance
Aest
hetic
s
Life
cycl
e Co
st
WallsPaint with plastic handrail/crash rail e $ e e e
Paint with stainless steel handrail/crash rail l $$ e 8 l
Stainless steel corner guards/end caps l $$ 8 8 l
Phenolic/Thermofoil/PLAM panel at room entry 8 $$$ 8 l 8
CeilingsAcoustical Tile 8 $ 8 8 8
Floor (consider adjacent flooring)Vinyl tile (VCT), rubber wall base e $ e e e
Luxury Vinyl Tile/Vinyl Enhanced Tile (VET), rubber wall base 8 $ 8 8 8
Vinyl sheet, integral base 8 $$ 8 8 8
Linoleum sheet or tile, integral base or rubber base 8 $$ 8 8 8
DoorsHollow Metal e $ l e e
Hospital stop frames 8 $$ l l e
PVC skin, high impact edge l $$ l l l
Metal + glass frame wall system-huddle room, Corian panels 8 $$$ 8 8 8
KEYPoor e
Good 8 Excellent l
NOTE: materials other than those listed above will require an Interiors Team review during the Feasibility phase to insure compliance to the Guidelines and compatibility to the budget.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
WCMC Sackler Greenberg 2 Allen Hospital Endo Prep and Recovery
CUMC Milstein In-Patient WCMC Greenberg
Nurse Station
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
Nurse Station/Huddle Rooms Dura
bilit
y
Cost
($’s
rela
tive
to c
ateg
ory)
Mai
nten
ance
Aest
hetic
s
Life
cycl
e Co
st
WallsPaint plastic rub strip e $ e e e
Paint with plastic bumper e $ e e e
Paint with stainless steel bumper 8 $$ 8 8 8
Stainless steel corner guards/end caps 8 $$ 8 8 8
Metal frame/Corian panel/glass - wall system for huddle room 8 $$ 8 8 8
CeilingsAcoustical tile l $ 8 e 8
Armstrong Metalworks tile l $$ l 8 8
Nurse Station DeskCorian work surface and outer shell, PLAM interior l $ l l l
Corian with accent resin panel 8 $$ l l l
Floor (consider adjacent flooring)
Vinyl tile (VCT) e $ e e e
Luxury Vinyl Tile/Vinyl Enhanced Tile (VET) 8 $ 8 8 8
Vinyl sheet, integral base 8 $$ 8 8 8
Linoleum sheet or tile, integral base or rubber base 8 $$ 8 8 8
Storage Upper and Lower CabinetsCasework with slant top, GWB soffit or fascia panel l $$ l l l
Custom plastic laminate w/3mm edge 8 $$ 8 l 8
DoorsHollow Metal e $ l e e
Hospital stop frames 8 $$ l l e
PVC skin, high impact edge l $$ l l l
Metal + glass frame wall system-huddle room, Corian panels 8 $$ 8 8 8
KEYPoor e
Good 8 Excellent l
NOTE: materials other than those listed above will require an Interiors Team review during the Feasibility phase to insure compliance to the Guidelines and compatibility to the budget.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
WCMC Sackler
In-Patient Bedrooms
WCMC Greenberg
Allen Hospital Spine Lower Manhattan - Birthing Suite
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
In-Patient Bedrooms Dura
bilit
y
Cost
($’s
rela
tive
to c
ateg
ory)
Mai
nten
ance
Aest
hetic
s
Life
cycl
e Co
st
Footwall
Paint w/plastic rub strip e $ e e e
Paint with stainless steel bumper e $$ 8 8 8
Corian accent wainscot or crash rail l $$ l l l
PLAM panels w/SST trim e $$ 8 8 8
3mm porcelain wall panel w/SST trim l $$$ l l l
Thermo foil/Phenolic panels w/SST trim l $$$ l l l
Headwall Wall mounted bed locater e $ e e e
Corian headwall panel e $$ 8 8 8
Prefab headwall panel system, phenolic or Corian panels l $$$$ l l l
Floor (consider adjacent flooring)Vinyl tile (VCT), rubber wall base e $ e e e
Luxury Vinyl Tile/Vinyl Enhanced Tile (VET), rubber wall base 8 $ 8 8 8
Vinyl sheet, integral base 8 $$ 8 8 8
Linoleum sheet or tile, integral base or rubber base 8 $$ 8 8 8
CeilingsAcoustical tile l $ 8 e 8
Hand wash Counter/Back splash/SinkCorian/Corian/Integral stainless steel sink l $$ l l l
Wardrobe and CaseworkCasework with slant top, GWB soffit or fascia panel l $$ l l l
Custom plastic laminate w/3mm edge 8 $$ 8 l 8
Prefab headwall system component l $$$$ l l l
DoorsHollow Metal e $ l e e
Hospital stop frames 8 $$ l l e
PVC skin, high impact edge l $$ l l l
KEYPoor e
Good 8 Excellent l
NOTE: materials other than those listed above will require an Interiors Team review during the Feasibility phase to insure compliance to the Guidelines and compatibility to the budget.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
WCMC Lisa Perry Emergency Department
Emergency Department
CUMC Adult Emergency Department
CUMC Adult Emergency Department Hudson Valley Emergency Department
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
Emergency Department Dura
bilit
y
Cost
($’s
rela
tive
to c
ateg
ory)
Mai
nten
ance
Aest
hetic
s
Life
cycl
e Co
st
Walls
Paint w/plastic rub strip e $ e e e
Paint with stainless steel bumper e $$ 8 8 8
3mm porcelain panels with SST trim l $$$ l l l
Stainless steel corner guards/end caps 8 $$ 8 8 8
Headwall Wall mounted bed locater e $ e e e
Corian headwall panel e $$ 8 8 8
Prefab headwall panel system, phenolic or Corian panels l $$$$ l l l
Floor (consider adjacent flooring)Vinyl tile (VCT), rubber wall base e $ e e e
Luxury Vinyl Tile/Vinyl Enhanced Tile (VET), rubber wall base 8 $ 8 8 8
Vinyl sheet, integral base 8 $$ 8 8 8
Linoleum sheet or tile, integral base or rubber base 8 $$ 8 8 8
Floorazzo/Terrazzo/Nurazzo l $$$$ l l l
CeilingsAcoustical tile l $ 8 e 8
Armstrong Metalworks tile l $$ l 8 8
Hand wash counter/backsplash /sinkWall hung American Standard ICU sink 8 $ 8 e 8
Corian/Corian/Integral stainless steel sink l $$ l l l
Nurse station desk
Corian work surface and outer shell, PLAM interior l $ l l l
Corian with accent resin panel 8 $$ l l l
Storage Upper and Lower CabinetsCasework with slant top, GWB soffit or fascia panel l $$ l l l
Custom plastic laminate w/3mm edge 8 $$ 8 l 8
KEYPoor e
Good 8 Excellent l
NOTE: materials other than those listed above will require an Interiors Team review during the Feasibility phase to insure compliance to the Guidelines and compatibility to the budget.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
Exam Rooms
David H. Koch Center ACN Starr 9 Men’s Health
NYP Queens Pinnacle Medical Group officesACN - Center for Special Studies - Outpatient, off site
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
Exam Room Dura
bilit
y
Cost
($
’s re
lativ
e to
cat
egor
y)
Mai
nten
ance
Aest
hetic
s
Life
cycl
e Co
st
WallsPaint w/plastic rub strip e $ e e e
PLAM panels w/ stainless steel trim e $$ 8 8 8
Corian accent wainstcott or crash rail l $$$ l l l
Thermo foil/Phenolic panels w/SST trim 8 $$$ 8 l 8
Floor (consider adjacent flooring)Vinyl tile (VCT), rubber wall base e $ e e e
Luxury Vinyl Tile/Vinyl Enhanced Tile (VET), rubber wall base 8 $ 8 8 8
Vinyl sheet, integral base 8 $$ 8 8 8
Linoleum sheet or tile, integral base or rubber base 8 $$ 8 8 8
Counter/Back + Side Splash/SinkCorian/Corian/Integral stainless steel sink l $$ l l l
Casework with slant top, GWB soffit or fascia panel l $$ l l l
Custom plastic laminate w/3mm edge 8 $$ 8 l 8
DoorsHollow Metal e $ l e e
Hospital stop frames 8 $$ l l e
PVC skin, high impact edge l $$ l l l
CeilingsAcoustical tile 8 $ 8 8 8
Wall ProtectionStainless steel corner guards/end caps l $$ l l l
Purell Corian mounting back plate l $$ l l l
KEYPoor e
Good 8 Excellent l
NOTE: materials other than those listed above will require an Interiors Team review during the Feasibility phase to insure compliance to the Guidelines and compatibility to the budget.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
DHK Infusion
Diagnostic/Treatment Rooms and Operating Rooms
Heart Center Procedure Room
WCMC L4 EP Lab DHK PREP REC
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
Diagnostic/Treatment Rooms and Operating Rooms Du
rabi
lity
Cost
($’s
rela
tive
to c
ateg
ory)
Mai
nten
ance
Aest
hetic
s
Life
cycl
e Co
st
Walls
Paint w/plastic rub strip e $ e e e
Paint with stainless steel bumper e $$ 8 8 8
Stainless steel corner guards/end caps 8 $$ 8 8 8
Wall covering (assess infection control risk) 8 $$ 8 8 8
PLAM/Thermofoil/Phenolic/Corian panels 8 $$ 8 8 8
3mm Porcelain wall tile 8 $$ 8 8 8
MFPHD stainless steel panel system (OR) l $$$$ l l l
Floor (consider adjacent flooring)Vinyl tile (VCT), rubber wall base e $ e e e
Luxury Vinyl Tile/Vinyl Enhanced Tile (VET), rubber wall base 8 $ 8 8 8
Vinyl sheet, integral base 8 $$ 8 8 8
Linoleum sheet or tile, integral base or rubber base 8 $$ 8 8 8
Floorazzo/Nurazzo, coordinating wall base l $$$ l l l
Terrazzo. Terrazzo wall base l $$$$ l l l
CeilingsGWB 8 $$ 8 8 8
Acoustic tile 8 $ 8 8 8
Acoustical tile with gasket grid 8 $$ 8 8 8
Laminar flow or other special ceiling 8 $$$$ 8 8 8
Hand wash Counter/Back splash/Sink Corian/Corian/Integral stainless steel sink l $$ l l l
Storage Upper and Lower CabinetsCasework with slant top, GWB soffit or fascia panel l $$ l l l
Custom plastic laminate w/3mm edge 8 $$ 8 l 8
KEYPoor e
Good 8 Excellent l
NOTE: materials other than those listed above will require an Interiors Team review during the Feasibility phase to insure compliance to the Guidelines and compatibility to the budget.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
DHK Open Plan workstations
Administrative Offices and Conferencing Areas
CUMC MHB 5 Heart Valve Offices
DHK Staff Corridor and Conference Room CUMC Staff locker rooms
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
Administrative Offices and Conferencing Areas Dura
bilit
y
Cost
($’s
rela
tive
to c
ateg
ory)
Mai
nten
ance
Aest
hetic
s
Life
cycl
e Co
st
Walls
Paint w/plastic rub strip as required e $ e e e
Wall covering - conference rooms, executive offices 8 $$ 8 8 8
Floor (consider adjacent flooring)Vinyl tile (VCT), rubber wall base e $ e e e
Luxury Vinyl Tile/Vinyl Enhanced Tile (VET), rubber wall base 8 $ 8 8 8
Vinyl sheet, integral base 8 $$ 8 8 8
Linoleum sheet or tile, integral base or rubber base 8 $$ 8 8 8
CeilingsAcoustical tile 8 $ 8 8 8
TechZone Acoustic tile Coordinated with AV + lighting 8 $$ 8 8 8
GWB (soffits only) 8 $ 8 8 8
Casework and CountersCasework with slant top and GWB soffit or fascia panel l $$ l l l
Millwork with slant top and GWB soffit or fascia panel 8 $$ 8 l 8
Plastic Laminate Countertop w/3mm edge (non-wet areas) 8 $ 8 8 8
Corian Countertop l $$ l l l
KEYPoor e
Good 8 Excellent l
NOTE: materials other than those listed above will require an Interiors Team review during the Feasibility phase to insure compliance to the Guidelines and compatibility to the budget.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
Restrooms Dura
bilit
y
Cost
($’s
rela
tive
to c
ateg
ory)
Mai
nten
ance
Aest
hetic
s
Life
cycl
e Co
st
Walls
Partial Porcelain Tile Walls w/ SST Trim e $ e 8 8
Full Porcelain Tile Walls with SST Trim 8 $$ 8 8 8
3mm Porcelain Tile Walls l $$ l l l
FloorLarge Format Porcelain Tile l $$ l l l
2” x 4” mosaic for shower floor l $$ l l l
Ceilings
Gypsum Board 8 $$ 8 8 8
Acoustical Tile 8 $$ 8 8 8
SinksWall Hung Porcelain 8 $ e e 8
Corian/Integral stainless steel sink l $$ l l l
AccessoriesPlastic Dispensers e $ e e e
Stainless Steel dispensers l $$ l l l
DoorsHollow Metal e $ l e e
Hospital stop frames 8 $$ l l e
PVC skin, high impact edge l $$$ l l l
KEYPoor e
Good 8 Excellent l
NOTE: materials other than those listed above will require an Interiors Team review during the Feasibility phase to insure compliance to the Guidelines and compatibility to the budget.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
REFERENCE PROJECTS | 1
JANUARY 2018 |REFERENCE PROJECTS |1
Holding + Storage Rooms Dura
bilit
y
Cost
($’s
rela
tive
to c
ateg
ory)
Mai
nten
ance
Aest
hetic
s
Life
cycl
e Co
st
Walls
Paint e $ e e e
Ceramic tile (full or partial height) 8 $$ 8 8 8
Plastic sheeting 8 $$ 8 e 8
Floor (consider adjacent flooring)Vinyl tile (VCT), rubber wall base e $ e e e
Luxury Vinyl Tile/Vinyl Enhanced Tile (VET), rubber wall base 8 $ 8 8 8
Vinyl sheet, integral base 8 $$ 8 8 8
Linoleum sheet or tile, integral base or rubber base 8 $$ 8 8 8
CeilingsAcoustical tile scrubbable
CaseworkCasework with slant top, GWB soffit or fascia panel l $$ l l l
Custom plastic laminate w/3mm edge 8 $$ 8 l 8
Stainless steel casework and/or shelves l $$$ l l l
Hand wash Counter/Back-splashWall hung porcelain sink e e e e e
Corian/Integral stainless steel sink l $$ l l l
Clinical sinks 8 $$ 8 8 8
Doors
Hollow Metal e $ l e e
Hospital stop frames 8 $$ l l e
PVC skin, high impact edge l $$$ l l l
Medical Group Blood centrifuge and autoclave
In-hospital option of Par Excellence clean room system
KEYPoor e
Good 8 Excellent l
NOTE: materials other than those listed above will require an Interiors Team review during the Feasibility phase to insure compliance to the Guidelines and compatibility to the budget.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
CEILINGS
DESCRIPTION NOTES
JANUARY 2018 |CEILINGS |2
The NYP standard calls for a 2x2 square edge tile specification. Installations of this tile type are less likely to result in patchwork ceilings due to poorly trimmed tile at the time of installation or maintenance repairs.
The 2x2 standard size also benefits facilities as they perform maintenance, as opposed to the challenges of stocking and handling larger formats.
The use of faux wood or solid color Armstrong Metalwork tiles is permitted on a limited basis and will be reviewed during design development.
Oversized, tegular trims, imported and other types of specialty ceiling tiles are also permitted on a limited basis and will be reviewed during design development.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
CEILINGS
DESCRIPTION NOTES
JANUARY 2018 |CEILINGS |2
Acoustic Ceiling Tile|Armstrong
Standard: Ultima #1910 square edgeOption for new construction: Ultima #1445 High NRCDimension: 24” square
Option: Ultima #1911 beveled tegularOption for new construction: Ultima #1447 High NRCDimension: 24” square
Option: Ultima Healthzone #1935 square edge onlyDo not specify tegular edge.Dimension: 24” square
Option: Metalworks TegularModel: 6463 Square tegular 15/16” gridModel: 6464 Square tegular 9/16” gridPerforation: M3 extra fineDimension: 24” square
• Square edge ceiling tile is the NYP standard.• High NRC tiles should only be specified in new
construction projects as the tiles are thicker than standard and require coordination with sprinklers.
• Limited use of beveled tegular ceiling tile and TechZone grid options must be approved during the design reviews.
• Metalwork grid selection to be reviewed with the campus Facilities manager prior to ordering.
• Metalwork faux wood ceiling requires that devices and trim colors be coordinated with the wood tone.
• Clean room gasket suspension systems are to be specified as required.
https://www.armstrongceilings.com/commercial/en-us/commercial-ceilings-walls/ceilings/ultima-ceiling-family.htmlhttps://www.armstrongceilings.com/commercial/en-us/commercial-ceilings-walls/metalworks-tegular-ceiling-tiles.html https://www.armstrongceilings.com/commercial/en-us/suspension-systems/15-16-inch-co-extruded-clean-room-grid.html
CUMC In-patient Dialysis Ultima square edge tile
CUMC In-patient Dialysis - Metalworks
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
DOORS AND FRAMES
DESCRIPTION NOTES
JANUARY 2018 |DOORS AND FRAMES |3
Door selection is to be based upon an impact risk assessment for both equipment and operational requirements of the particular location.
Whenever possible, hospital stops are to be specified to simplify floor maintenance.
Glass doors and side-lites are permitted, however film applications are discouraged because of inherent durability issues.
Glass doors require adequate stainless steel frames for durability.
Custom metal and glass walls and partitions are to be reviewed during design development.
Please refer to the NYP Locking Guidelines for door locking hardware specifications per campus. The campus Locksmith must review and approve selections.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
DOORS AND FRAMES
DESCRIPTION NOTES
JANUARY 2018 |DOORS AND FRAMES |3
Manufacturer: MasoniteModel: Aspiro SeriesPVC film durable face finish options available from Korowood and Spectrum Building Products (See wall protection section of the Guidelines).
Masonite option for light to medium duty use:• High pressure laminate, must have High Impact edge.
Wilsonart and other laminate options available. Refer to plastic laminate Guidelines, section 5.1
Masonite option for extremely heavy duty use:• Stainless steel rails
• Mop plates should only be placed on utility room doors• High impact edge band must be specified over structural
lumber as required by equipment and room usage.• Glass-lites trim kits paint color is to be specified to avoid
field finishing.• Hollow metal doors and frames should be used as a cost
saving option where appropriate. And in most cases, should be used for support rooms and closets.
• Locking hardware is campus specific and should follow NYP Guidelines. It is to be reviewed by NYP Security and the campus locksmith.
https://www.masonite.com/architectural/products/aspiro-series
Allen Hospital Spine In-Patient, Masonite door with optional stainless steel style
Typical hollow metal hospital stop frame
High Impact Doors|Masonite
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
FLOORS AND TILE
DESCRIPTION NOTES
JANUARY 2018 |FLOORING |4
Proper floor selection is one of our most significant interior design challenges. We expect flooring materials, with the proper maintenance, to last at least 25 years.
In order to ensure proper maintenance, we strive never to combine floor types with different cleaning and maintenance protocols in a single department. This approach reduces housekeeping challenges.
The challenges of keeping bathrooms clean are well documented. In order to improve maintenance, a minimum 12” x 24” porcelain tiles are to be used in patient areas of the hospital NYP. Wet room tile selection must consider patient safety in relationship to reducing slips and falls.
Grout colors in all locations need to be a medium to dark color as a way of reducing visible soiling. All grout shall be epoxy. Very limited use of ceramic tile in support areas such as janitor’s closest or utility rooms is permitted.
No matter the tile location, stainless steel trim is to be used on outside corners and exposed wainscot edges. Coved tiles are not acceptable other than in utility rooms.
Maintenance instructions and warranty information must be included in final document handover to the NYP FDC Project Manager as the final finish is performed by NYP Environmental Services and not the installation contractor.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
FLOORS AND TILE
DESCRIPTION NOTES
JANUARY 2018 |FLOORING |4
Vinyl Composition Tile|Armstrong Excelon
Manufacturer: ArmstrongModel: Excelon Standard Vinyl Composition Tile12” Square, 1/8” thickGeneral use color: select from various beige and gray neutralsGreenberg Excelon colors:• Shelter White 51836• Field Grey 51927• Smokey Brown 51868• Pewter 51908PEDS colors: various color hues will be considered during design development
• Appropriate selection for in-patient and ambulatory settings where initial cost is a priority over life cycle cost.
• High contrast color mix to be avoided to accommo-date persons with low vision.
• Asymmetrical floor patterns with neutral colors are preferred.
• Consistency of floor finish should be considered when specifying Excelon adjacent to other flooring materials.
• Excelon is a high maintenance floor, review with EVS prior to specifying.
https://www.armstrongflooring.com/commercial/en-us/products/vinyl-composition-tile/std-excelon-imp-texture.html
WCMC K8 Corridor WCMC F Corridor proposal
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
FLOORS AND TILE
DESCRIPTION NOTES
JANUARY 2018 |FLOORING |4
Solid Vinyl Tile | Johnsonite Cortina Grande
Manufacturer: JohnsoniteModel: Cortina Grande Solid Vinyl Tile16” Square, 1/8” thickGeneral use color: select from various beige and gray neutralsPEDS colors: various color hues will be considered during design development
• Appropriate selection for in-patient and ambulatory settings.
• High contrast color mix to be avoided to accommodate persons with low vision.
• Feasibility budgets should be based upon more than one color and laser cut seams where there is an intricate pattern design.
• Consistency of floor finish should be considered when specifying Cortina Grande adjacent to other flooring materials.
http://johnsonite.com/Flooring-Products/VCT-VET-SVT/Cortina-Grande-SVT/Cortina-Grande-Product-Details/sku/Cortina-Grande509
Allen Hospital - 2RW Corridor
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
FLOORS AND TILE
DESCRIPTION NOTES
JANUARY 2018 |FLOORING |4
Vinyl Tile|Johnsonite Gemstone
Manufacturer: JohnsoniteModel: Gemstone Solid Vinyl Tile16” Square, 1/8” thickColor options: limited gray and beige optionsMetallic and glass chip aesthetic
• Appropriate for front of house, patient facing and administrative areas.
• High contrast is to be avoided to accommodate persons with low vision.
• Consistency of floor finish maintenance must be considered when specifying Gemstone adjacent to other flooring materials.
http://johnsonite.com/Flooring-Products/Vinyl-Flooring/Gemstone-Product-Details/sku/MG610
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
FLOORS AND TILE
DESCRIPTION NOTES
JANUARY 2018 |FLOORING |4
LVT Tile and Planks - faux wood|Various
Other manufacturers of equal quality can be considered during design development.
• Appropriate for general use including both clinical and administrative areas.
• These particular colors were selected to offer a range of options to coordinate with NYP standard furniture and millwork wood tones.
• Other wood tones can be considered, however, NYP will not approve any woods that are darker or lighter than those illustrated.
• LVT stone and faux texture visuals can also be considered during design development.
• Consistency of floor finish maintenance must be considered when specifying LVT floors adjacent to other flooring materials.
https://www.armstrongflooring.com/commercial/en-hk/products/lvt-luxury-flooring.htmlhttps://parterreflooring.com/store/#collectioningrained
ParterreHavana Mahogany#118806” x 36”
ParterreMadison Teak#118606” x 36”
ParterreLaurel Cherry #118556” x 36”
ArmstrongAlder Mid #TP0184” x 36”
ParterreCanadian Maple#112104” x 36”
ParterreTrad. Walnut#118766” x 36”
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
FLOORS AND TILE
DESCRIPTION NOTES
JANUARY 2018 |FLOORING |4
LVT Tile and Planks - faux textiles|Various
Other manufacturers of equal quality can be considered during design development.
• Appropriate for general use including both clinical and administrative areas.
• These particular colors were selected to offer a range of options to coordinate with NYP standard furniture and millwork wood tones.
• Other wood tones can be considered, however, NYP will not approve any woods that are darker or lighter than those illustrated.
• LVT stone and faux texture visuals can also be considered during design development.
• Consistency of floor finish maintenance must be considered when specifying LVT floors adjacent to other flooring materials.
https://www.armstrongflooring.com/commercial/en-hk/products/lvt-luxury-flooring.htmlhttps://www.shannonspecialtyfloors.com/products-page/t3/
ArmstrongMystixMorocco AniseTP07818” x 18”
ShannonT3SpaTX350318” x 18”
ArmstrongAriaCharcoalTP79618” x 18”
ArmstrongAriaGray BeigeTP77618” x 18”
ShannonT3StudioTX350218” x 18”
ShannonT3AgencyTX 350418” x 18”
ShannonT3Resort (non-clinical use only)TX 351418” x 18”
ArmstrongMystix NevaLullabyNA9206” x 36”
ArmstrongMystix NevaRise + ShineNA9236” x 36”
ArmstrongMystix NevaButtercupNA9246” x 36”
ArmstrongMystix NevaGoodnightNA9226” x 36”
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
FLOORS AND TILE
DESCRIPTION NOTES
JANUARY 2018 |FLOORING |4
LVT Tile and Planks - faux Stone|Various
SELECTIONS UNDER REVIEW
• Appropriate for general use including both clinical and administrative areas.
• These particular colors were selected to offer a range of options to coordinate with NYP standard furniture and millwork wood tones.
• Other wood tones can be considered, however, NYP will not approve any woods that are darker or lighter than those illustrated.
• LVT stone and faux texture visuals can also be considered during design development.
• Consistency of floor finish maintenance must be considered when specifying LVT floors adjacent to other flooring materials.
Other manufacturers of equal quality to the wood LVT can be considered during design development.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
FLOORS AND TILE
DESCRIPTION NOTES
JANUARY 2018 |FLOORING |4
Homogeneous and Heterogeneous Sheet|Various
Manufacturer: Johnsonite heterogeneous sheetStyle: Melodia and AriaVarious neutral color options for general useColor hues only permitted in PEDS areas
Approved manufacturers:• Armstrong (homogeneous)• Forbo (homogeneous)• Teknoflor (heterogeneous faux wood)
Other manufacturers can be considered during design development.
• Integral wall base as per code requirements.• Installations with curved or complex patterns MUST
be laser cut.• Feasibility budgets should be based upon more
than one color and laser cut seams where there is a design pattern.
• Consider the Flexco base as an alternate to standard cove base.
http://johnsonite.com/Flooring-Products/Vinyl-Flooring/Melodia-20-Homogeneous-Sheet-Tile
MSCHONY PICU WCMC PACU
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
FLOORS AND TILE
DESCRIPTION NOTES
JANUARY 2018 |FLOORING |4
Poured and Tile Terrazzo|Various
Manufacturer: Mats Inc. FloorazzoPolyester terrazzo resinSize: 24” x 24”
Manufacturer: NurazzoEpoxy terrazzo resinSize: 12” x 24”, 24” x 24”
Terrazzo Thin set epoxy with zinc divider strips, 3/8” thickBonded terrazzo with zinc divider strips, 2” thick, recessed slab
• For reception areas, building lobbies, or clinical areas of the hospital requiring a seamless floor
• Must be accounted for in early feasibility budgets• Must include coats of sealer as per manufacturer’s
instruction• Floorazzo - preformed cove base appropriate for
sanitary conditions • Nurazzo - in conjunction with a SST Schluter coved
molding and Nurazzo base.• Nurazzo option for a grouted thinset installation.• Various color options including custom colors• Option to vary aggregate content
http://matsinc.com/floorazzo-marblehttp://www.nurazzo.com/https://ntma.com/
WCMC OR#10
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
FLOORS AND TILE
DESCRIPTION NOTES
JANUARY 2018 |FLOORING |4
Porcelain Floor Tile|Various
Manufacturer: Atlas ConcordeModel: Brave Style: large format porcelain rectified floor tileVarious color and size options
Other manufacturers can be considered during design development.
• For building lobbies or street level reception areas• Optional wall tile to be reviewed during design
development• Coordinating dark epoxy grout colors are required
to hide dirt.
https://www.atlasconcorde.com/en-us/collections/ac/brave-floor-and-wall/
Eye Institute building lobby Color: Gypsum Color: Pearl
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
FLOORS AND TILE
DESCRIPTION NOTES
JANUARY 2018 |FLOORING |4
Utility Room Tile |Prospec
FLOOR TILEManufacturer: Casalgrande Model: Granito 1Color options: ArkansasSize: 12” x 12”
WALL TILEManufacturer: Roco Model: Color Collection CeramicColor options: Tender Grey Matte #U261Size: 6” x 6”
Epoxy grout: follow manufacturer directions for minimum line size
Color: Maipai Kerapoxy CQ #09 Gray walls and floor
• Janitor closets, soiled utility rooms• Coordinating cove base and corner trims
http://www.casalgrandepadana.com/products/granitogres/granito-1http://rocatilegroup.com/collections/color-collection/
Arkansas Tinder Grey Matte
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
FLOORS AND TILE
DESCRIPTION NOTES
JANUARY 2018 |FLOORING |4
Restroom/Bathroom|Warm Palette
FLOOR TILEManufacturer: Casalgrande PadanaModel: ChalonColor: Grey - matte finishSize: 3/8” thick, 12”x24”Shower room tile option: 2” x 4” mesh backed
WALL TILEManufacturer: Caslagrande PadanaModel: ArchitectureColor: Lt. Ivory - matte finishSize: 3/8” thick, 6” x 24”, 12” x 24”Epoxy Grout: follow manufacturer directions for minimum line size
Mapei Kerapoxy CQ - #107 Iron, floors and walls
• Public and patient restrooms• Coordinate metal trims for unpolished edges and
outside corners.• Schluter Rondec trim for general use• Schluter Quadec trim for use in amenity areas• Option for 10.5mm thick, 24” x 24”(for larger rooms)
http://www.casalgrandepadana.com/search-product?color=All&surface=All&format=All&ln=chalonhttp://www.casalgrandepadana.com/search-product?color=All&surface=All&format=All&ln=architecture
Floor: Chalon Grey Wall: Architecture Lt. Ivory
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
FLOORS AND TILE
DESCRIPTION NOTES
JANUARY 2018 |FLOORING |4
FLOOR TILEManufacturer: Casalgrande PadanaModel: Terre ToscaneColor: San Casiano - matte natural finishSize: 9.5mm thick, 12”x24”,Shower room tile option: 2” x 4”, mesh backed
WALL TILEManufacturer: Casalgrande PadanaModel: Terre ToscaneColor: Gaiole - matte natural finishSize: 9.5mm thick, 12”x24”,Epoxy Grout: follow manufacturer directions for minimum line size.
Mapei Kerapoxy CQ - #107 Iron, floors and walls
• Public and patient restrooms• Coordinate metal trims for unpolished edges and
outside corners.• Schluter Rondec trim for general use• Schluter Quadec trim for use in amenity areas• Option for 10.5mm thick, 24” x 24”(for larger rooms)
Wall: Terre Toscane San CasianoFloor: Terre Toscane Gaiole
Restroom/Bathroom|Cool Palette
http://www.casalgrandepadana.com/products/pietre-native/terre-toscane
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Damaged and scuffed walls are the number one maintenance challenge requiring constant painting and result in the perception of a general lack of cleanliness. Therefore, specifying the correct wall protection application is imperative based upon an impact risk assessment, considering equipment, and operational requirements.
Wall protection options range from full height sheets to bumpers and handrails.
All walls within 42” of a counter with a task chair must at a minimum have a rub strip installed on the vulnerable wall surface. A rub strip should also be applied to any wall perpendicular to work surfaces with a task chair.
An NYP standard is full height stainless steel corner guards and end caps applied to all outside corners in clinical areas. Sizes range from metal edge trims, 2” and 3.5” traditional corner guards the selection dependent on the impact risk.
Tile walls (including 3mm porcelain sheets) must have stainless edge protection, the size of the corner protection to be determined by impact risk.
To facilitate maintenance, a limited number of paint colors have been included in the Guidelines. NYP Infection Control requires that mold and moisture resistant drywall/gypsum board, be specified on all new installations as it limits the risk of mold growth and dispersal resulting from water damage.
Decorative wall finishes should only be applied in consideration of durability, impact risk, infection control and maintainability criteria.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
Paint Palette New Construction and Refresh Projects
DOORS & TRIM
Shaker Beige HC-45Optional accent wall paint
Floral White OC-29
Gray Huskie 1473Optional accent wall paint
Grey Horse 2140-50
WHITES (walls only; not to be used as trim paint)
Decorator White PM-3GWB ceilings and soffit
Glacier White AC-40 White Sand 964
ACCENT WALL COLOR HUES
Barley 199 America’s Heartland 197
Excalibur Gray 2118-50
Nantucket Fog AC-22
Flora AF-470
Creamy Custard 1145
Pale Almond OC-2 Misty Memories 2118-60
Palace Pearl CW-650
Nelson Blue CW-635
PUBLIC AREAS• Lobbies, public corridors, in-patient units,
cafeteria paint palette selections determined by the Interiors Team or a capital project team in coordination with the design development review.
DEPARTMENTAL AREAS• Colors are to be selected by department from
the palette, 3-walls to be white, one accent wall permitted, limited to no more than 2 colors within a department.
FINISHES: Benjamin Moore • General walls: Eggshell: Scuff-X for new
construction/Natura for renovations • Doors & Frames: Semi-gloss Corotech V341 for
new construction/Natura renovations• Ceilings & Soffit: Flat: Scuff-X for new construction/
Natura for renovations • Wet rooms, OR’s, Lab walls: Scuff-X Satin for new
construction/Natura Semi-gloss for renovations
JANUARY 2018 |PAINT PALETTES|5.1
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
PEDS - Paint Palette New Construction and Refresh Projects
DOORS & TRIM
Shaker Beige HC-45Optional accent wall paint
Gray Huskie 1473Optional accent wall paint
WHITES (walls only; not to be used as trim paint)
Decorator White PM-3GWB ceilings and soffit
Glacier White AC-40 White Sand 964
ACCENT WALL COLOR HUES
Paradise Hills 550
Fresh Scent 2033-30Driftwood 2107-40
Mellow Yellow 2020-50
Blue Lapis 2067-40
Bahama Sea 2055-40
Woodmont Cream 204
Antelope Canyon 125
PUBLIC AREAS• Lobbies, public corridors, in-patient units, cafeteria paint
palette selections determined by the Interiors Team or a capital project team in coordination with the design development review.
DEPARTMENTAL AREAS• Colors are to be selected by department from the palette,
3-walls to be white, one accent wall permitted, limited to no more than 2 colors within a department.
FINISHES: Benjamin Moore • General walls: Eggshell: Scuff-X for new construction/Natura
for renovations • Doors & Frames: Semi-gloss Corotech V341 for new
construction/Natura renovations• Ceilings & Soffit: Flat: Scuff-X for new construction/Natura for
renovations • Wet rooms, OR’s, Lab walls: Scuff-X Satin for new
construction/Natura Semi-gloss for renovations
JANUARY 2018 |PAINT PALETTES |5.1
Wheatfield 2159-50 Summer Blue 2067-50Amber Waves 2159-40
Deep Ocean 2058-30
Windmill Wings 2067-60Melon Popsicle 2016-50 Blue Belle 2064-60Pale Vista 2029-60
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Wall Protection|Pawling
BR-1600S
HANDRAILS AND HANDRAIL/CRASHRAILS • BR-1600S Stainless steel pipe rail, corners and
brackets• BR-4SS Stainless steel pipe rail, crash rail and
brackets• BR-530 Endura handrail and bumper, aluminum
reinforced retainer, vinyl cover
BUMPERS AND WALL GUARDS• CRS-200.90 Stainless steel w/90degree groove or
option of no groove model number CRS-202• WG Series Vinyl crescent bumpers, 5” or 8” as per
location risk• WC-60 Vinyl wall rub strip, 8” tall with beveled top
and bottom edge
CORNER GUARDS• SST Corner Guard, 3.5” leg or 2” leg as per location
risk, above wall base to ceiling, end caps on nib walls
HANDRAILS AND HANDRAIL/CRASHRAILS • Wood handrails are not permitted.BUMPERS AND WALL GUARDS• Rub rail: Coordinate w/standard wall base colors:
Pawling #316-JS280 Shoreline and #463- JS55 Silver Grey.
• Mid-wall bumpers: 6” cove plastic wall bumpers or stainless steel as per impact risk.
• Low-wall bumpers to be placed directly on top of the 6” wall base to reduce cart damage.
• Bumpers and rails start and stop 2” off of door frames to assist re-painting.
• Procedure rooms to have SST bumpers, plastic rub rails or Corian wall as per impact risk.
• Also permitted is Pawling High Impact wall covering, however, usage shall be in compliance with NYC Build-ing code for fire and smoke development.
CRS 200.90 or CRS 202 (no groove)
BR-4SS BR-530
WC-60
Stainless steel corner guard
WG Series
http://www.pawling.com/products/impact-protection-systems/wall-guards
HANDRAILS AND HANDRAIL/CRASHRAILS
BUMPERS AND WALL GUARDS
CORNER GUARDS
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Wall Protection|Construction Specialties
HR-6CRBN
HR-6CRBN Stainless steel, corners and brackets with Chameleon PETG faux wood cover.
• Only the style illustrated should be specified from C-S.
• Chameleon color options: #654 Urbanwood or #1312 Burmese Teak • Also permitted is Acrovyn High Impact wall cover-
ing. Usage shall be in compliance with NYC Building code for fire and smoke development.
http://www.c-sgroup.com/acrovyn
G.W.B. (BY OTHERS)
STEEL STUD (BY OTHERS)
#10 X 2" PH FLAT HD SMS32" [812.8mm] O.C. MAX.
3" [77.4mm]
3 1/2" [89.4mm]
5 1/4" [133.1mm]
STAINLESS STEELMOUNTING BRACKET
(24S061000)
ACROVYN 4000 COVER(24U032xxx)
ACROVYN CHAMELEON(24U610xxx)
ALUMINUM RETAINER(24A095000)
STAINLESS STEELBRACKET COLLARw/ BRACKET ADAPTER(24S294000)(24S293000)
6696 Route 405 Highway, Muncy PA 17756(800) 233-8493 Fax (570) 546-4692 www.c-sgroup.com
WALL CONDITION SPECIFIED FASTENERDRILL DIAMETERS C/S PART
NUMBERWALL RETAINER
STEEL STUD/GYPUSM WALL #10 X 2" PHILLIPS FLAT HEAD SHEET METAL SCREW 1/16" N/A 90H431002
CONCRETE/CONC. BLOCK 1/4" X 2 1/4" HEX HEAD MASONRY 3/16" N/A 90H027004
WOOD STUD/GYPSUM WALL #9 X 2 1/4" PHILLIPS WAFER HEAD DRYWALL SCREW N/A N/A 90H421002
TOTALL/F REQ'D
LEFTEND
CAPS
RIGHTEND
CAPS
I.S.C./O.S.C.REQ'D
COLOR:TOP RAIL:________________________________________*END CAPS:_______________________________________COLOR TO BE SELECTED FROM ONE OF C/S STANDARD COLORS.
*CAPS/CORNERS ARE AVAILABLE WITH AN OPTIONAL POWDER COAT FINISH.PLEASE ADVISE POWDER COAT FINISH IF REQUIRED.STAINLESS STEEL END CAPS AND INSIDE/OUTSIDE CORNERS ALSO AVAILABLE.
DOC#: TS-930- ISSUE DATE: REV DATE:07/11/12652N 06/17/14
ACROVYN 4000HR-6CRBN
Burmese TeakUrbanwood
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Resilient Wall Base |Johnsonite
Manufacturer: JohnsoniteModel Traditional Wall BaseThermoplastic Rubber 6” with coveBeige Standard: #TP280 ShorelineGray Standard: #TP55 Silver GrayCoiled lengths only
http://johnsonite.com/Wall-Base-Finishes-Accessories/Finish-Borders-Wall-Base/Baseworks/Baseworks-Product-Details/sku/TSB-XXX-6
Silver Gray Shoreline
• The use of other base colors is not permitted due to maintenance and inventory challenges.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Resilient Wall Base|Flexco
Manufacturer: FlexcoModel: Health Design Wall BaseThermoplastic Rubber 6” tall coved base with trasnsion to 3” toe lengthHeat-weld to sheet goods
http://www.flexcofloors.com/health-design-wall-base/?cbg_tz=300
3”
6”
• Color selection should be limited to medium tones avoiding lights and darks.
• Color specification to be reviewed during design development.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Wall Covering/Wall Panels|Various
https://carnegiefabrics.com/xorelhttp://www.maharam.com/products/tek-wall-parable/colors/007-mannerhttp://www.designtex.com/products/wallcovering.html?filter_content=6180http://www.wolfgordon.com/wallcovering.htmlhttps://unikavaev.com/products/categories/acoustic-products/
Manufacturer: CarnegieModel: Xorel wall covering and panels - patterns and stylesType II/PVC FreeBleach cleanableClass A Class 110 year warrantyOther approved manufacturers • Maharam Tek-Wall• Designtex various• Wolf Gordon various• Unika Vaev (panels)Other manufacturers can be considered during design development.
• All wallcovering is to be bleach cleanable regardless of the location.
• Preferred method of installation for wall covering is direct glue.
• Acoustic wrapped panels or ArtForm acoustic panels can be used but only when installed a minimum of 36”AFF in low impact administrative or conference areas. Z clips or direct glue installation options to be reviewed during design development.
Carnegie ArtForm acoustic panels
LMH Carnegie Xorel wall
Allen Hospital Carnegie Xorel upper wall, SST bumper
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Solid Surface|Corian
http://www.corian.com/-architects-designers-
1/4” radius Corian edge detail when Corian is used as partial height sheet wall protection
Corian solid surface sheetGrades A, B, or C onlyPrivate collection colors are not to be used due to the costs and the constructibility issues with pattern at coves and seams.
• 1/2” sheet material to be used on vertical wall surfaces
• 1/4” radius edge on all exposed edges• Corian sheet is an optional wall protection finish
when there is a need for a non-porous wall finish such as:• Treatment and procedure rooms• Clinical corridors with heavy cart traffic• Operating rooms• In-patient headwall • Dialysis box wall protection
1/4” radius Corian edge detail when Corian is used as partial height sheet wall protection
WCMC PACU
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Thin Porcelain Wall Tile|Various
https://crossvilleinc.com/laminam-by-crossville/http://www.porcelanosa-usa.com/products/tile/xlight-extra-light-thin-porcelain.htmlhttp://products.daltile.com/catalog.cfm?log=10http://www.ceramichelea.it/en/collections/slimtech-absolute/https://www.schluter.com/schluter-us/en_US/
Crossvile Laminam thin porcelain tileThickness: 3mm with fiberglass mesh backPanel size: 1m x3m, 1m x 1mOther approved manufacturers:• Porcelenosa XLight• Daltile Slimlite• Lea Ceramiche Slimtech• Other manufacturers of equal quality can be con-
sidered during design development.
• 3mm tiles are suitable for wall application only, not to be used on floors or millwork.
• 3mm tile require additional stainless steel wall protection at outside corners to be selected based upon impact risk.
• Schluter Jolly or Quadec trims to frame panels.• Wall base can be Johnsonite Millwork rubber,
Corian or SST
Chelsea Clinic entry
Allen Hospital - Laminam wainscot Plan section at door frame
Plan section at tile joint
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Architectural Glass|Various
Manufacturer: VariousStyles: VariousApproved glass manufacturers:• Skyline• Forms and Surfaces• Carvart• McGrory• Other manufacturers of equal quality can be considered
during design development.
• Glass walls with a wood interlayer is the best way to integrate a warm wood aesthetic in a durable finish and should be considered for public spaces.
• Glass reflectivity must be considered when specifying lighting, and therefore requires the engagement of a lighting designer.
• Proper edge protection and base details required based upon impact risk.
• The required degree of opacity must be considered when specifying fret or etched glass, with samples provided during design development.
• Transparancy goals should be obtained by etching or interlayers.
• Film on glass is not preferred in clinical areas due to maintainability issues.
CUMC Adult Emergency Department building lobby, wood interlayer and channel glass walls
WCMC Men’s Health reception, back painted and inter-layer images glass
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Decorative Stone Walls|Various
Mocha Creme LimestoneRoman Travertine - filled epoxyVarious stone sourcesOther stones can be considered during design development.
• Stone tile walls are appropriate for use in public areas.
• Corner detail must include stainless steel protection, designed to withstand impact.
• Designer to review actual samples to ensure consistency and quality.
• Coordinate with stone base, avoid stainless steel wall base due to clean-ability issues.
• Grout colors to be reviewed during design development, light colors will not be approved.
WCMC Pearlman Atrium Lobby filled travertine epoxy David Koch Building Sky Lobby Mocha Creme limestone
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Thermoplastic Sheet|Various
http://www.koroseal.com/korogard/products/wallcoverings/korowood-wallcovering.phphttp://www.spectrimbp.com/ven4mahttp://www.renolit.com/design/en/products/3d-applications/http://www.c-sgroup.com/acrovyn/wall-covering
Korowood: Plastic sheetingThickness: .040Other approved manufacturers:• Spectrum Building Products - Ven4MA (coordinates
with Masonite Durable Doors)• Renolit• Acrovyn• Other manufacturers of equal quality can be
considered during design development.
• Designer responsible for the proper selection of substrate and adherence to applicable fire codes including smoke development.
• Panels to be framed with metal trim.
Allen Hospital: PACU with Korowood panel and Corian lower wall
MSCHONY Cardiac NICU thermoplastic headwall panels
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
High Pressure Laminates|Various
Manufacturer: WilsonartOption #1 Walnut Heights #7695-12, Aon FinishOption #2 Brazilwood #7946-38, Velvet Texture
Compact Laminate panels option: for vertical wall panels at high impact locations (coordinated with Frey Riglet Graph system or Wall Panel Systems (WPS - Redlands CA).
Approved manufacturers:• Formica, Pionite, Panolam, Laminart• Other manufacturers of equal quality can be consid-
ered during design development.
• Appropriate FR or MR substrates to be specified by location and in compliance with fire and safety restrictions.
• Wall panels must have appropriate metal trims to withstand the impact risk of the location.
• Grain direction must be specified.• Solid colors and wood grains other than Brazilwood
and Walnut Heights may be used subject to design reviews.
https://www.wilsonart.com/laminate-surfaceshttp://wallpanelsystems.net/http://fryreglet.com/product-systems/graph-modular-wall-system/
Walnut Heights
Brazilwood
DHK OR Corridor - phenolic panels with metal trim
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Drywall Molding|Projection molding
Manufacturer: Gordon InteriorsModel: 947-CM-25 Project MoldingSeries: Final Forms I - #940Extruded aluminum
• Provides start and stop opportunity for different wall paint colors.
• NOTE: gypsum wall board in clinical areas MUST be mold and moisture resistant as per NYP Infection control.
• Mold and impact resistant sheet rock to be specified based upon impact risk assessment.
http://www.gordon-inc.com/cad/interiors/ff1/947-cm-25.pdf
Allen Hospital - Spine In-patient bedroom entry, paint break
Women’s Hospital - NICU footwall, laminate and paint
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Bed Locater (replaces Hill-Rom)| Wittrock Healthcare
Manufacturer: Wittrock HealthcareModel: Wall Protector Bed LocaterDimensions: 50”W x 22.5”H, 65lbs, depth at center 2.76”NYP Standard: bed bumper function only, no power or data connectivity.
• This bed locater was formally sold by Hill-Rom. • Also available with power and data options, how-
ever, must be reviewed and approved by Facilities Operations prior to specification.
https://www.caddetails.com/Main/Company/ViewProduct?productID=8787&companyID=3157
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
WALLS
DESCRIPTION NOTES
JANUARY 2018 |WALLS |5
Hand Sanitizer Solid Surface Back Panel |Custom
Manufacturer: Custom Millwork1/2” solid surface back plate for locating hand sanitizer. Can also be used for organizing signage.All edges to have 1/4” radius.
• Effective for reducing need for wall maintenance. Can be used full height as an entry door feature or partial height behind and below the dispenser.
• Options: Corian, resin, or phenolic panels.
Payson 6 PEDS HemOnc
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
MILLWORK AND CASEWORK
DESCRIPTION NOTES
JANUARY 2018 |MILLWORK |6
Millwork is considered permanent therefore only neutral colors are considered timeless to be an NYP Standard.
The substrate for custom plastic laminate millwork is to be selected based upon code criteria as either fire rated or moisture resistant medium density fiberboard. Particle board is not to be used without approval during design development.
Plastic laminate exposed edges are to be finished with a 3mm PVC edge band.Self edge trims are never acceptable.
Counter-tops in wet areas must be solid surface, there is a preference for Corian over other brands for clinical areas. Back and side splash must be fabricated with coved horizontal seams, and a drip edge at wet counter locations.
Plastic laminate counters with 3mm edge banding are permitted in non-wet and non-patient facing areas.
A 6” toe kick base detail is typical other than in off-site Medical Group offices where a 4” kick base is permitted. A rubber base must be installed on all millwork.
No worksurface shall be installed less than 42” in front of a wall to allow for appropriate task chair clearances. Refer to Wall section 5.1 for wall protection information.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
MILLWORK AND CASEWORK
DESCRIPTION NOTES
JANUARY 2018 |MILLWORK |6
High Pressure Laminates|Various
Manufacturer: WilsonartOption #1 Walnut Heights #7695-12, Aon FinishOption #2 Brazilwood #7946-38, Velvet TextureHPL with 3mm matching edgeband for general casework and millworkApproved manufacturers:• Formica, Pionite, Panolam, Laminart• Other manufacturers of equal quality can be consid-
ered during design development.Casework option for Exam Rooms only:• Steelcase Health Folio - NYP Standard Special• Herman Miller Mora - NYP Standard Special
• Appropriate FR or MR substrates to be specified by location and in compliance with fire and safety restrictions.
• All exposed HPL millwork panels, including door and drawer edges must receive matching PVC edge-band.
• Grain direction must be specified.• Laminate counters cannot be used in wet areas.
Those locations require a solid surface countertop with a MR or Marine grade substrate.
• Solid colors and wood grains other than Brazilwood and Walnut Heights may be used subject to design reviews.
• Cabinet interiors can be melomine or HPL depending on budget and project location.
• Slant tops, PLAM fascias or soffits required for upper cabinets.
• Height of upper cabinets should be determined based upon OSHA and safety and accessibility.
https://www.wilsonart.com/laminate-surfaceshttps://www.steelcase.com/products/bookcases-cabinets/folio/https://www.hermanmiller.com/solutions/healthcare/
Walnut Heights
Brazilwood
Lawrence Hospital Medical Group - Eastchester
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
MILLWORK AND CASEWORK
DESCRIPTION NOTES
JANUARY 2018 |MILLWORK |6
Solid Surface|Various
Grades A, B, or C only, neutral tones, color hues are not permitted.Private collection colors are not to be usedOther approved Solid Surface manufacturers:• Porcelanosa Krion• FormicaApproved engineered stone manufacturers:• Corian Zodiac• Cosentino Eco• CaesarstoneOther manufacturers of equal quality can be considered during design development.
• Corian is to be used for counters and nurse station desks in clinical areas.
• Engineered stone is permitted in non-clinical areas including departmental reception desks.
• Color selection should consider the challenges of integral seams and the ability to hide scratches.
• Desk designs should consider the opportunities of forming solid surface materials to unique shapes while recognizing durability challenges and a timeless design aesthetic.
• Clinical reception desks must be designed in consideration of HIPPA best practices.
• Cabinet interiors can be Melamine or HPL depending on the budget.
http://www.corian.com/-architects-designers-http://www.formica.com/en/us/products/formica-solid-surfacing#swatchesTabhttp://www.krion.com/us/ http://ecobycosentino.com/usa/colors/http://www.caesarstoneus.com/
EYE INSTITUTE - Clinic reception
MSCHONY - Cardiac NICU pantry
NYP Queens Pinnacle exam room - Corian counter with Karran integral sink, back and side splash, tall storage cabinet
MSCHONYUrology ReceptionCorian desk, 3Form divider panels, Acrovyn printed art
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
MILLWORK AND CASEWORK
DESCRIPTION NOTES
JANUARY 2018 |MILLWORK |6
Laboratory|Bedcolab and Herman Miller Pharmacy |Lionville Metro
Laboratory and pharmacy casework requirements are project specific. These are manufacturers who have provided products on past projects.
• Becolab - Laboratory• Herman Miller - Laboratory• Lionville Metro - Pharmacy
• Components and finishes to be reviewed during design development.
• Countertop will be epoxy or Corian depending on programmatic requirements.
http://www.bedcolab.com/portfolio/weill-cornell-belfer-bldg/http://www.metro.com/workcenters/fixtures/lionville-pharmacy-fixtures-shelvinghttps://www.hermanmiller.com/solutions/healthcare/applications/laboratory/
Weill Cornell - Belfer BuildingBedcolab
CUMC - Manual LaboratoryHerman Miller
CHONY 797 PharmacyLioinville Metro
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Storage Drawer|Mockett
REF: Mockett DWR1-90 Storage Drawer
DIMENSIONS: W: 19-15/16” D: 23-15/32”
Mounts to a 23-3/8” deep surface, 1” thick.Molded matte high impace polystyrene, soft molded front panel.Bin fits letter, legal folders (rods included).
https://www.mockett.com/dwr1-90.html
DWR1
N.T.S.
AN
2014.05.05
ROD
2016.02.01± 1 / 32 "
1 OF 1
1:00Pm
-
-
ALL DIMENSIONS HAVE A +/- 1/32" TOLERANCE UNLESS OTHERWISESPECIFIED. WE DO NOT RECOMMEND DRILLING OR CUTTING ANY HOLESBEFORE RECEIVING A PRODUCT OR A PRODUCT SAMPLE.ALL MEASUREMENTS ARE IN INCHES.
PART NAME:
SCALE:
DRAWN BY:
DATE:
LAST EDITED:
DATE:TOLERANCE:
P.O. BOX 3333MANHATTAN BEACH, CA 90266 USAPHONE: 310.318.2491 FAX: 310.376.7650email: [email protected] www.mockett.com
REQUESTED BY: SHEET:
APPROVED BY:
Plan view
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
Millwork|Details
Illustrates how the side splash meets the upper cabinet
Typical millwork section:• ADA front sink panel• Karran integral stainless steel sink• Full height back and side splash, with coved seams• Long upper cabinet door with finger pull• Joined upper cabinets must have flush bottom without exposed cabinet walls.• If task lights are installed, they must be switched with the ceiling lights and not a toggle.• Upper cabinet options: slant top, GWB soffit or PLAM fascia
Illustrates 3mm cabinet edge on upper cabinet door
JANUARY 2018 |MILLWORK |6.1
Corian coved side splash and back splash
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
Millwork | Details
Note: dimensions are shown for reference, the designer is responsible for sizing the millwork and all coordination with utitilies, devices and fixtures.
JANUARY 2018 |MILLWORK |6.1
Typical section at sink cabinet with upper wall cabinet
Typical section integral pull and a solid surface countertop drip edge.
Typical section upper cabinet with long door in lieu of pull hardware
Microwave shelf stops
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
The selections on the following pages represent hardware items used successfully on past projects and should be considered as Guideline Options; not as NYP Standards.
Designers and contractors are responsible for coordinating the application of these products to specific project requirements.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Hafele | Pull out double or single waste bin
Manufacturer: Hafele
Model: Kesse Double Bottom Mount BinReference: 502.56.510
Model: Kesse Single Bottom Mount BinReference: 502.56.500
Frame: Silver powder platedSpecify gray plastic bin
Bin capacity: 36qt. each
• Cabinet doors require appropriate label to indicate trash, line, or recycling. Refer to NYP Signage Guidelines for location and type.
• Base cabinet widths cannot be larger than the maximum width to avoid trash spills into cabinet.
• Review bin sizes with Environmental Services and client.
https://www.hafele.com/us/en/product/waste-bin-pull-out-kesseboehmer-double-bottom-mount/000000920001129f00020023/
Fits Base cabinet 15”-18”W
Fits Base cabinet 13”-15”W
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Trash Chute|Arch Hardware
Manufacturer: Arch HardwareModel: R 4518 Ga. stainless steel trash shield 2’’ back x 3 7/8’’ Various lengths with a 1/4’’ drop and tapered ends toallow for opening & closing of door.
• Review manufacturers details. The proper trash container that is as wide as the chute opening must be provided for it to work to avoid spillage in into the cabinet.
• The chute is only to be used in cabinets of the same width to avoid coordination issues with the trash container.
• The Hafele pull out drawer and the Karran chutes are optional under cabinet options for waste containers.
https://www.archhardware.net/index.php/trash-chute.html
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Waste Chute|Karran
Manufacturer: KarranModel: Waste ChuteDiameter: 7” or 9” Brushed stainless steel
• Designed to be seamlessly bonded underneath solid surface countertop.
• Fully integral installation same as the Karran sink.• Millworker must follow manufacturer’s installation instructions.• The chute location must be coordinated with the size and
location of the trash container. A retaining collar may be required to keep the container in place and avoid spillage into the cabinet.
http://www.karranproducts.com/accessories.html
Edge Detail
Front/Side Detail
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Recessed Cabinet Pull and optional Finger Pull|Hafele
Manufacturer: HafeleModel: 126.27.036Satin Aluminum 116AL318’ lengths
• Continuous pulls can be used on cabinet doors or drawer fronts.
• Finger pull with longer cabinet door in lieu of hardware is the preferred option for upper cabinets.
https://www.hafele.com/us/en/product/continuous-handle-aluminum/000000c10000ff7500010023/SKU=000000c10000ff7500010023
Finger pull detail - Upper Cabinet
WCMC GP8S
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Recessed Cabinet Pull and optional Finger Pull|Schwinn
Manufacturer: SchwinnModel: 2518Satin NickelWidth: 5.5”
• Recessed pulls can be used on cabinet doors or drawer fronts.
• Finger pull with longer cabinet door in lieu of hardware the preferred option for upper cabinets.
http://www.us.schwinn-group.com/fileadmin/user_upload/PDF/Catalog_QS_USA_2013.pdf
Ambulatory Network - 21 Audobon
Finger pull detail - Upper Cabinet
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Amenity Toilet Room Grab Bar|WingIts
Manufacturer: WingItsModel: Modern EleganceReference: WGB5MEADA compliant grab barSatin Stainless steel finishSizes range from up to 60” LPipe dia.: 1-1/4”
• Load capacity 800 lbs. • Not intended for bariatric use.• Fasteners selected in consideration of wall construction,
blocking required.• Appropriate for amenity space types or lobby rest rooms.
http://wingits.com/products/modern_elegance/grab_bars/modern_elegance_grab_bar_54
Lower Manhattan - 6th floor Labor + Delivery
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Amenity Double Coat Hook|WingIts
Manufacturer: WingItsModel: Modern EleganceReference: WMEGDRHDouble Robe (coat) HookSatin Stainless steel finishWidth: 3”Projection: 2.215” from wall surface
• Load capacity 100 lbs. • Fasteners selected in consideration of wall construction• Appropriate for amenity space types or lobby rest rooms• Coordinate depth with behind the door mirror as required• ADA height hooks shall be provided as required
https://wingits.com/wingitspdfs/wingits_modernelegance_doublerobehook_wmedrhgm.pdf
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Double Coat Hook |ASI
Manufacturer: ASIModel: 7312Double Robe (coat) HookSatin Stainless steel finishDimension: 1-15/16” x 1-15/16” x 2-3/8”
• Fasteners selected in consideration of wall construction. Coordinate depth with behind the door mirror in exam rooms as required.
• ADA height hooks shall be provided as required.
http://americanspecialties.com/wp-content/uploads/TDS-73121.pdf
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Coat Hook|Glaro
Manufacturer: Glaro Knob Coat HooksModel: Solid brushed aluminumReference: “D” Series
1 knob - 3-1/2”W2 knob - 8-1/2”W3 knob - 16”W
Height 2.5”
• Fasteners selected in consideration of wall construction.
• Appropriate for general use in non-patient areas.
http://www.glaro-products.com/coat_trees.htm
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Coat Hook|Safco
Manufacturer: SafeCo Nail Head Coat HooksModel: Solid brushed aluminumReference: #4202Dimensions: D: 2-3/4” H: 2”
2 Knob: #4200 W: 12”3 Knob #4201 W: 18”6 Knob #4020 W36”
• Fasteners selected in consideration of wall construction.
• Appropriate for general use in non-patient areas.
http://www.safcoproducts.com/spaces/lounge---lobby/nail-head-coat-hook--3-hook-%28qty-12%29-4201#features
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Counter Leg|Mockett
Manufacturer: MockettModel: TLFR2W - 26D Dual Rectangular Leg22 1/16” stretcherSatin chrome finishWeight capacity 400 lbs. per leg.
• Counter top weight, equipment weight and other program uses to be considered when specifying.
• To be used with millwork counters.
http://www.mockett.com/tlrf2-w-26d.html
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Millwork Counter Leg Post|Mockett
Manufacturer: MockettModel: TL27P-3 - 27”3” dia Post LegPlate leveler22 1/16” stretcherSatin chrome finishWeight capacity 300 lbs. per leg.
• Counter top weight, equipment weight and other program uses to be considered when specifying.
• To be used with millwork counters.• Optional finishes Polished Chrome, Matte Black.
http://www.mockett.com/tl27p-3.html
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Counter Bracket - Inside Wall Flush Mount|Rakks
Manufacturer: RakksModel: EH Flush MountMounted to stud facing wallVarious models to coordinate with counter depths from13” to 30” deep countersClear Anodized finish
• Fabricator to determine maximum unsupported spans and overhangs.• Other finishes available• Only to be used in patient facing location where the bracket is
very visible, or executive areas
http://rakks.com/counter-support-brackets/
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Surface Mounted Counter Bracket|Rakks
Manufacturer: HafeleModel: Speed Brace #287.77.XXVarious dimension available to coordinate with counter depths and weightsConduit holes for power and communication wireStainless steel finish
• Fabricator to determine maximum unsupported spans and overhangs.
• Coordinate with wire management J-channels or ties as requested by IT.
http://rakks.com/counter-support-brackets/
Home Products Furniture, Kitchen & Living Solutions Connectors & Shelf Supports Shelf Supports & Brackets
SpeedBrace Work Surface Bracket, Rigid
Item No.
Quantity
Line Level PO
Select directly
Select product features
Finish
Black Stainless steel White
Length
(12") 305 mm (18") 457 mm (21") 533 mm (28") 711 mm
Width
(11/2") 38 mm (13/4") 45 mm
Height
Product details
Recommended Countertop Sizes:
21" x 28" brace: 30"32" tops
28" x 21" brace: 22"24" tops
15" x 18" brace: 20"24" tops
18" x 15" brace: 16"20" tops
8" x 12" brace: 10"16" tops
Material Steel
Load capacity: 1,000 lbs. per pair when mounted on 16" centers
A 3/4" x 1 1/2" notching system for fast and easy alignment afterinstalling a level wall cleat
Two different sized arm lengths, which allow for one brace to be usedfor two different sized countertops
Heavyduty folded steel design for strength
Two conduit holes, which are designed for running power andcommunication cables independently
Countersunk screw holes allow screws to be mounted flush,recommended screw size is a #8 with a countersunk head
Available in epoxycoated or stainless steel
21Dec2017
Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263 Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: [email protected]
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Shelf Supports|Hafele
Manufacturer: HafeleModel: 282.24.718 Shelf SupportNickel plated zinc3 wedged ribs for strength
• Fabricator to determine the correct shelf support based upon shelf material and anticipated loads.
• Angular pins or spoon pins tend to fall out and should not be used.
https://www.hafele.com/us/en/product/shelf-support-offset-75-kg/28224718/?Master-SKU=0000001600018c0b00020023#
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Double Cabinet Door Lock|CompX Timberline
Manufacturer: CompX TimberlineModel: CXXXCBPlated zinc camsHousing black nylon
• Surface mounted lock for locking two adjacent doors.• Eliminates the need for a spring catch on the door oppo-
site the lock.• Works with either overlay or inset doors.• Coordinate keying preferences with end user.
http://compx.com/images/compxtimberline_aug2014.pdf
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Wire Management|Mockett
Manufacturer: MockettModel: WM2 J-Shape Wire Manager2.1/2” wide by 1”One foot lengths up to 6’ longOptional double-sided factory installed tapeColors available to coordinate with desk/paint finish- black, brown, gray, putty
• Other sizes available, coordinate wire management requirements with IT manager.
• Coordinate with grommet locations.
http://www.keedex.com/Main_Pages/Products/doorproducts/protectalok.html
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Grommet|Mockett
Manufacturer: MockettSleeve Model: EDPAD1 - EDP Adjustable Depth Grommet Liner2-1/2”dia. holeVarious colors available to coordinate with desk/paint finishesCap Model: EDP5Plastic plated grommet capFinish: 26D Satin Chrome
• Coordinate wire management requirements with IT manager including locations and quantity
• Coordinate grommet color with worksurface color
http://www.mockett.com/catalog/product/view/id/4346/s/edp5/category/8009/
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Trim Protector Bar|Assa Abloy
Manufacturer: Assa AbloyModel: Rockwood R111LPB, other models available based on hardware conditionsStainless steel trim protection for lever handlesThrough bolt installation with finish washersMade to order sizes available
• Door UL listing requirements to be validated.• Trim protection is to be specified for utility room doors
(clean, soiled, EVS, etc.) to protect the door lever hardware.
http://www.rockwoodmfg.com/en/site/rockwoodmfgcom/products/full-line/protection/trim-protector-bars/
Kick plate with coordinated SST frame protection
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Heavy-duty Trim Protector Bar|Keedex
Manufacturer: KeedexModel: K-12K Protect-A-Lock series18 gauge stainless steel trim protection for lever handlesVarious sizes available
• Door UL listing requirements to be validated• Trim protection is to be specified for back of house utility
room doors where heavy cart traffic is expected• Coordinating hardware - Kick plate - Frame protection, height coordinated with kick plate
http://www.keedex.com/Main_Pages/Products/doorproducts/protectalok.html
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Wall Mounted Door Stop Assa Abloy|Assa Abloy
Manufacturer: Assa AbloyModel: Rockwood RM860Satin stainless steel trim protection for lever handlesGray Duraflex bumperBase: 1-5/8”Projection: 1-3/32”
• Specify as required
http://www.rockwoodmfg.com/en/site/rockwoodmfgcom/products/architectural-line/door-stops/rm860/
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Security Coat Hangers|Magnusson
Manufacturer: Magnuson GroupModel: MG-17CLSilver painted steelClosed Loop
• Order with Magnuson Coat Rack or with custom coat rod installations.
http://files.magnusongroup.com/sitedocs/pdf/metalhangerssellsheet-13428.pdf
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
HARDWARE
DESCRIPTION NOTES
JANUARY 2018 |HARDWARE |7
Coat Rack|Magnusson
Manufacturer: Magnuson GroupModel: DS-XX
Dimension: 6-1/2” H x 11-1/2” D x 24”, 36”, 48”, 60” or 72”W
Powder coated steel with stainless steel hanger bar.
Capacity 5 hangers per foot.
• Order security hangers separately, they can be in-stalled at time of installation.
http://magnusongroup.com/products/coat-racks/dsserieswallracks.html
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
CUBICLE CURTAINS AND WINDOW SHADES
DESCRIPTION NOTES
JANUARY 2018 |CUBICLE CURTAINS AND WINDOW SHADES |8
Product types in this section:• Cubicle Curtains• Window Shades
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
CUBICLE CURTAINS AND WINDOW SHADES
DESCRIPTION NOTES
JANUARY 2018 |CUBICLE CURTAINS AND WINDOW SHADES |8
Cubicle Curtains| Maharam and Construction Specialties
Maharam Semaphore Color: 511442 SolaceAll ambulatory locations.In addition at LMH, Queens, MHB, LH and HV Sema-phore is the In-Patient standard
Maharam Leaflet PlaidColor: 502408 CorianderRestricted to MHB, GP and AH In-patient
Maharam GameboardColor: #6 CrayonAll PEDS locations, including Emergency Departments
• Standard Track: Construction Specialties C-S 6062 Surface Mounted Aluminum Track, SP062 Spool Carriers
• Semaphore and Leaflet Plaid are current patterns.• Gameboard - Maharam maintains special NYP stock,
please contact NYP sales representative for stock availability.
http://www.c-sgroup.com/cubicle-track-curtains
Semaphore Leaflet Plaid Gameboard
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
CUBICLE CURTAINS AND WINDOW SHADES
DESCRIPTION NOTES
JANUARY 2018 |CUBICLE CURTAINS AND WINDOW SHADES |8
Mecho/5 standardStyle: Thermoveil #1316 - 5% open weaveColor: EggshellLifetime warranty
Mechoshade cloth for sun conditionsStyle: Thermoveil #0907- 1% open weaveColor: BeigeLifetime warranty
• Must specify with a shade valence or install in a window pocket.
• Pull drive chain mechanism.• Lift assist mechanisms specified for larger win-
dows, review specifications with Mechoshade.• Blackout shade cloth and track details to be re-
viewed during Design Development.• Either electric or chain control locations to be
reviewed during Design Development.• Soho Cloth with an Urban Bracket is an option for
Medical Group offices or back of house locations. To be reviewed during Design Development.
Window Shades|Mechoshades
21 Audubon ACN
http://www.mechoshade.com/shadecloth/thermoveil.cfm
MechoShade Systems, Inc.42-03 35th Street, Long Island City, NY 11101Telephone: 718-729-2020 E-mail: [email protected]: 718-729-2941 / 800-899-8081 Internet Web Site: www.mechoshade.com© Copyright 2007, MechoShade Systems, Inc., Long Island City, NY. DoubleShade, EuroVeil, Mecho, MechoShade, SnapLoc and ThermoVeil are registered trademarks of, and SlimLine is a trademark of,MechoShade Systems, Inc. Specifications subject to change without notice.
The MechoShade® Manual Drive System
2.03MS2200 - 01/01/08
Max. Roll Diameter Max. Roll Diameter Bracket Dimensions Without Optional Fascia,Bracket Type With Fascia Without Fascia Roll Up Diameter or Wall Mount Bracket
Mecho® SlimLine™ 2-1/4" (57mm) 2-3/4" (70mm) 2-3/8" (60mm) W x 3-3/4" (95mm) HMecho®/5 Standard 2-3/4" (70mm) 2-3/4" (70mm) 3" (76mm) W x 3-3/4" (95mm) HMecho®/5 Pocket Extended N/A 4" (102mm) 3" (76mm) W x 4-3/8" (111mm) HMecho®/5 Extended 3-7/16" (87mm) 5" (127mm) 3" (76mm) W x 4-13/16" (122mm) HMecho®/5 DoubleShades®
#10 Rear shade Blackout 2-3/4" (70mm) 2-3/4" (70mm) 7-1/2" (191mm) W x 3-3/4" (95mm) H#10 Front shade Sunscreen 2-3/4" (70mm) 2-3/4" (70mm)#15 Top shade Blackout 2-3/4" (70mm) 3-3/8" (86mm) 4-5/16" (110mm) W x 7-9/32" (185mm) H#15 Bottom shade SunScreen 2-3/4" (70mm) 4-5/16" (110mm)*Mecho/5 Lifetime Limited Warranty: for the life of the interior project, not to exceed 25 years. See pages 2.26 – 2.28 for specific details.† See pages 2.26 – 2.28 for details.
Mecho®/5
Mecho®/5, MechoShadeʼs latest patented design featuring an overrunning clutch,self lubricating components and larger diameter sprocket, providing 67% morelift capacity. As a result, Mecho/5 increases the shade size range that a manualdrive system can lift before motorization is required. Plus, the Mecho/5 carriesa Lifetime* Limited Warranty on the hardware and shadecloth.Mecho/5 requires no adjustments, resulting in faster, easier installation. Mecho/5has been field tested and performance proven on hundreds of thousands ofshades installed worldwide. Available in Standard, Pocket Extended, Extendedand DoubleShade® bracket sizes.The Mecho/5 can accommodate shades up to 126" (320cm) wide by180" (457cm) high.
Mecho® SlimLine™:
SlimLine™ is MechoShadeʼs compact heavy-duty bracket system designed forsmall shades in narrow spaces, uses the Mecho®/3 operating system and carriesa 10-Year Limited Warranty† on the hardware and shadecloth.
MechoShade® brackets are available in a variety of sizes:
604/2REVISION
MechoShade Systems, Inc.42-03 35th Street, Long Island City, NY 11101Telephone: 718-729-2020 E-mail: [email protected]: 718-729-2941 / 800-899-8081 Internet Web Site: www.mechoshade.com© Copyright 2007, MechoShade Systems, Inc., Long Island City, NY. DoubleShade, EuroVeil, Mecho, MechoShade, SnapLoc and ThermoVeil are registered trademarks of, and SlimLine is a trademark of,MechoShade Systems, Inc. Specifications subject to change without notice.
The MechoShade® Manual Drive System
2.03MS2200 - 01/01/08
Max. Roll Diameter Max. Roll Diameter Bracket Dimensions Without Optional Fascia,Bracket Type With Fascia Without Fascia Roll Up Diameter or Wall Mount Bracket
Mecho® SlimLine™ 2-1/4" (57mm) 2-3/4" (70mm) 2-3/8" (60mm) W x 3-3/4" (95mm) HMecho®/5 Standard 2-3/4" (70mm) 2-3/4" (70mm) 3" (76mm) W x 3-3/4" (95mm) HMecho®/5 Pocket Extended N/A 4" (102mm) 3" (76mm) W x 4-3/8" (111mm) HMecho®/5 Extended 3-7/16" (87mm) 5" (127mm) 3" (76mm) W x 4-13/16" (122mm) HMecho®/5 DoubleShades®
#10 Rear shade Blackout 2-3/4" (70mm) 2-3/4" (70mm) 7-1/2" (191mm) W x 3-3/4" (95mm) H#10 Front shade Sunscreen 2-3/4" (70mm) 2-3/4" (70mm)#15 Top shade Blackout 2-3/4" (70mm) 3-3/8" (86mm) 4-5/16" (110mm) W x 7-9/32" (185mm) H#15 Bottom shade SunScreen 2-3/4" (70mm) 4-5/16" (110mm)*Mecho/5 Lifetime Limited Warranty: for the life of the interior project, not to exceed 25 years. See pages 2.26 – 2.28 for specific details.† See pages 2.26 – 2.28 for details.
Mecho®/5
Mecho®/5, MechoShadeʼs latest patented design featuring an overrunning clutch,self lubricating components and larger diameter sprocket, providing 67% morelift capacity. As a result, Mecho/5 increases the shade size range that a manualdrive system can lift before motorization is required. Plus, the Mecho/5 carriesa Lifetime* Limited Warranty on the hardware and shadecloth.Mecho/5 requires no adjustments, resulting in faster, easier installation. Mecho/5has been field tested and performance proven on hundreds of thousands ofshades installed worldwide. Available in Standard, Pocket Extended, Extendedand DoubleShade® bracket sizes.The Mecho/5 can accommodate shades up to 126" (320cm) wide by180" (457cm) high.
Mecho® SlimLine™:
SlimLine™ is MechoShadeʼs compact heavy-duty bracket system designed forsmall shades in narrow spaces, uses the Mecho®/3 operating system and carriesa 10-Year Limited Warranty† on the hardware and shadecloth.
MechoShade® brackets are available in a variety of sizes:
604/2REVISION
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
PLUMBING, TOILET AND BATH ACCESSORIES
JANUARY 2018 |PLUMBING, TOILET AND BATH ACCESSORIES S |9
DESCRIPTION NOTES
PLUMBINGRefer to the NYP 2015 Equipment Cuts: Plumbing Fixtures guide for all fixture cuts and associated equipment located on the Facilities vendor site. https://enet.nyp.org/sites/facilities/default.aspx
The Interior Guidelines features the Karran integral sink because it must be installed by the Corian fabricator as part of the countertop assembly and not by the plumber.
TOILET AND BATH ACCESSORIESNYP strives to use the best and most cost effective products as illustrated with these selections. Other products can be considered during the Design Development review process if it improves upon the current selection.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
PLUMBING, TOILET AND BATH ACCESSORIES
JANUARY 2018 |PLUMBING, TOILET AND BATH ACCESSORIES S |9
DESCRIPTION NOTES
Handwash Sinks|Karran
Manufacturer: Karran Model E-505 typical sink size, handwash locationModel E 303 optional smaller size if required18 gauge stainless steelGrid strainer only, not the pop up drain
10 degree edge detail
• The Karran sink is the NYP standard for all countertop installations.
• The Karran sinks when installed correctly are integral to the solid surface countertop. The contractor MUST follow the manufacturer’s instructions to achieve the mandatory seamless outcome. The sinks must be shop installed in the Corian by the millworker, not field installed.
• Overflow available as required by building codes and Facilities Operation preference.
Http://www.karran.com/models.html?subtype=Edge+Series&type=list_all&submit=Continue
EDG
ES
ERIE
S
Model: E-505Features and Specifications: Vanity sink 17-7/8” x 16-7/8” x 5-1/2” Internal volume — 900 cu.in. Internal area — 217 sq.in. Manufactured from 18 gauge, Type 304 stainless steel Underside coated with a protective coating and affixed with rubber pads for sound absorption 1-1/4” x 3/4” machined, resin matrix rim 15mm radius corners Sink surface has a brushed satin finish Can only be installed in new countertops, not existing countertops with existing sink cutout Undermount installation required. May not be top mounted This sink may be bonded seamlessly in solid surface and laminate This sink may be undermounted to all stone products. 1/8” overhang recommended Supplied without mounting adhesive, clips or template Digital templates for CNC machines are available at www.karran.com Strainer basket shown not included with sink Overflow optional extra. To order a grid strainer with overflow use code DRAIN-GRID-OF. To order a pop-
up strainer with overflow use code DRAIN-POP-OF. Grid drain without overflow optional extra. Use code DRAIN-GRID to order.
Edge Series Sink Installed in Laminate Edge Series Sink Installed in Solid Surface
Karran USA ● 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com
Shown in LaminateInstallation: Seamless
Shown in Solid SurfaceInstallation: Seamless
Shown in StoneInstallation: 1/8” Overhang
ALL DIMENSIONS ACCURATE TO 1/4”
Karran, your source for seamless integration
Recommended edge profiles in solid surface
ADA Compliant when installed per Americans with DisabilitiesAct Accessibility Guidelines, Section 606 Sinks.
TOP ELEVATION
SIDE ELEVATION
EDG
ESE
RIE
S
Model: E-303
Edge Series Sink Installed in Laminate Edge Series Sink Installed in Solid Surface
Karran USA ● 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com
Shown in LaminateInstallation: Seamless
Shown in Solid SurfaceInstallation: Seamless
Shown in StoneInstallation: 1/8” Overhang
ALL DIMENSIONS ACCURATE TO 1/4”
TOP ELEVATION
FRONT ELEVATION SIDE ELEVATION
Karran, your source for seamless integration
Recommended edge profiles in solid surface
Features and Specifications: Vanity sink 17-1/2” x 14-3/8” x 5-3/4”. Internal volume — 640 cu.in. Internal area — 145 sq.in. Manufactured from 18 gauge, Type 304 stainless steel. 1-1/4” x 3/4” machined, resin matrix rim. Waste opening: 1-3/4”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink. Overflow optional extra. To order a grid strainer with overflow use code DRAIN-GRID-OF. To order a pop-
up strainer with overflow use code DRAIN-POP-OF. Grid drain without overflow optional extra. Use code DRAIN-GRID to order.
ADA Compliant when installed per Americans with DisabilitiesAct Accessibility Guidelines, Section 606 Sinks.
17-1/2”
14-3/8”
12-1/4”
15-1/2”
5-3/4”5-3/4”
7-3/4”
3-1/2”
ED
GE
SE
RIE
S
Model: E-505Features and Specifications: Vanity sink 17-7/8” x 16-7/8” x 5-1/2” Internal volume — 900 cu.in. Internal area — 217 sq.in. Manufactured from 18 gauge, Type 304 stainless steel Underside coated with a protective coating and affixed with rubber pads for sound absorption 1-1/4” x 3/4” machined, resin matrix rim 15mm radius corners Sink surface has a brushed satin finish Can only be installed in new countertops, not existing countertops with existing sink cutout Undermount installation required. May not be top mounted This sink may be bonded seamlessly in solid surface and laminate This sink may be undermounted to all stone products. 1/8” overhang recommended Supplied without mounting adhesive, clips or template Digital templates for CNC machines are available at www.karran.com Strainer basket shown not included with sink Overflow optional extra. To order a grid strainer with overflow use code DRAIN-GRID-OF. To order a pop-
up strainer with overflow use code DRAIN-POP-OF. Grid drain without overflow optional extra. Use code DRAIN-GRID to order.
Edge Series Sink Installed in Laminate Edge Series Sink Installed in Solid Surface
Karran USA ● 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com
Shown in LaminateInstallation: Seamless
Shown in Solid SurfaceInstallation: Seamless
Shown in StoneInstallation: 1/8” Overhang
ALL DIMENSIONS ACCURATE TO 1/4”
Karran, your source for seamless integration
Recommended edge profiles in solid surface
ADA Compliant when installed per Americans with DisabilitiesAct Accessibility Guidelines, Section 606 Sinks.
TOP ELEVATION
SIDE ELEVATION
Model - E505
Model - E303
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
PLUMBING, TOILET AND BATH ACCESSORIES
JANUARY 2018 |PLUMBING, TOILET AND BATH ACCESSORIES S |9
DESCRIPTION NOTES
Toilet Partitions|Various
Manufacturer: AmpcoModel: Stainless steelHardware: all hardware to be cast stainless steel and not aluminumPartition Finish: 5-WL Diamond patternCoat hooks requiredCoordinating wall hung urinal screensOther approved manufacturer:• ASI - Global PartitionsOther manufacturers can be considered during design development.
http://www.ampco.com/toilet-partitions/health-care/http://globalpartitions.com/products/stainless-steel/
• Preference for ceiling hung partitions.• Head rail braced or floor mounted for 1 to 1 renova-
tions as required.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
PLUMBING, TOILET AND BATH ACCESSORIES
JANUARY 2018 |PLUMBING, TOILET AND BATH ACCESSORIES S |9
DESCRIPTION NOTES
Folding Shower Seat|American Specialties
Manufacturer: ASIModel: 8208-LFold up L-Shaped Shower SeatStainless SteelRight or left handedDimensions:Fold Down- 33” x 17” to 19” x 23”Fold Up - 33” x 35” to 37” x 23”
• Fastening system must be adequately sized to meet the • Programmatic requirements of the room design.
http://americanspecialties.com/product/fold-up-l-shaped-shower-seat-8208-l/
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
PLUMBING, TOILET AND BATH ACCESSORIES
JANUARY 2018 |PLUMBING, TOILET AND BATH ACCESSORIES S |9
DESCRIPTION NOTES
Folding Shower Seat|Hewi
Manufacturer: HewiModel: 801.XXFold up Shower SeatStainless Steel core with Polyamide cover
• Fastening system must be adequately sized to meet the programmatic requirements of the room design.
• Wall hung models only, not floor standing.• Color options available.• Rectangular and L shaped styles (left or right sided)
https://oxomi.com/p/2024781/catalog/10066957
L shaped can be ordered left or right
Pure White Stone Grey Anthracite Sand Umber
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
PLUMBING, TOILET AND BATH ACCESSORIES
JANUARY 2018 |PLUMBING, TOILET AND BATH ACCESSORIES S |9
DESCRIPTION NOTES
Bed Pan Holder|Vendura
Manufacturer: Vendura Model: 1313 WMBPDimension: 13” x 13” x 6”Solid surface
http://www.vendura.com/products/wall-mount-bed-pan-holder/
• For in-patient bathrooms.
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
PLUMBING, TOILET AND BATH ACCESSORIES
JANUARY 2018 |PLUMBING, TOILET AND BATH ACCESSORIES S |9
DESCRIPTION NOTES
Amenity Surface Shelf |Ginger
Manufacturer: GingerModel: Surface CollectionSizes: 12” straight shelf, 8-7/8” corner shelfFinish: Satin nickel on brass
• For amenity in-patient bathrooms
https://www.gingerco.com/products/collections/28/Surface
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
PLUMBING, TOILET AND BATH ACCESSORIES
JANUARY 2018 |PLUMBING, TOILET AND BATH ACCESSORIES S |9
DESCRIPTION NOTES
Accessory Shelf |American Specialties
Manufacturer: American Specialties, Inc.Model: Roval Surface ShelfSizes: Various stock sizes, custom sizes availableFinish: 18 gauge, 304 stainless steel alloy
• For general use
http://americanspecialties.com/product/surface-mounted-shelf-20692/
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
PLUMBING, TOILET AND BATH ACCESSORIES
JANUARY 2018 |PLUMBING, TOILET AND BATH ACCESSORIES S |9
DESCRIPTION NOTES
Dispensers and Containers|American Specialties and Bobrick
ASI: Roval SeriesBobrick: Contura Series
Options for “C” fold paper, toilet paper dispensers and containers.Stainless steel, various gauge depending on type.Various mounts available based upon wall type.
Mirrors:ASI: Roval SeriesBobrick: Welded Frame Series
• Dispensers must be reviewed and approved by Environmental Services for each project to confirm the exact paper stream, trash capacity and bag type.
http://americanspecialties.com/collection/roval/http://www.bobrick.com/washroomaccessories/Pages/ProductDetails.aspx?Product+Number%3dB-43644
ASI Roval recessed waste container Bobrick Contura recessed waste container
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
PLUMBING, TOILET AND BATH ACCESSORIES
JANUARY 2018 |PLUMBING, TOILET AND BATH ACCESSORIES S |9
DESCRIPTION NOTES
Hand Dryer | Dyson
Dyson: Airblade VModel: HU02 Sprayed Nickel
• Appropriate for public restrooms. • Must be budgeted during feasibilty and coordinated
for electrical requirements.• Recommend that the Airblade be installed in
conjection with a paper towel dispenser.
http://www.dyson.com/hand-dryers/airblade-v.aspx
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
PLUMBING, TOILET AND BATH ACCESSORIES
JANUARY 2018 |PLUMBING, TOILET AND BATH ACCESSORIES S |9
DESCRIPTION NOTES
AquaSpec® is a registered trademark of Zurn Industries, LLC.
ZURN INDUSTRIES, LLC. ♦♦♦♦♦ COMMERCIAL BRASS OPERATION ♦♦♦♦♦ 5900 ELWIN BUCHANAN DRIVE ♦♦♦♦♦ SANFORD NC 27330Phone: 1-800-997-3876 ♦♦♦♦♦ Fax: 919-775-3541 ♦♦♦♦♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦♦♦♦ 3544 Nashua Drive ♦♦♦♦♦ Mississauga, Ontario L4V1L2 ♦♦♦♦♦ Phone: 905-405-8272 Fax: 905-405-1292
ENGINEERING SPECIFICATION: ZURN Z8946-3-NT Combination Kit:One trap protector, two supply stop protectors and one offset drainprotector, satin white PVC resin. Antimicrobial, resists thermal transfer,and is ADA compliant. Trap protector fits both tubular and semi-cast Ptraps.Patent Pending
________________ COMBINATION KIT: ONE TRAP, TWOSUPPLY STOP PROTECTORS, AND ONE
OFFSET DRAIN PROTECTORZ8946-3-NT
TAG _______
Rev. B Date: 3/4/2015Dwg. No. 66245 Product No. Z8946-3-NT
Sink trap cover|Zurn
Manufacturer: ZurnModel: Trap Wrap Z8946-3-NYDimension: 4-5/8”W x 4-3/4”D x 11-3/4”HFinish: Stain white PVC resinADA compliant
http://www.zurn.com/media-library/web_documents/pdfs/specsheets/z8946-3-nt-pdf
DHK Exam Room
NewYork-Presbyterian Interior Guidelines for Consistent Interiors
˃ Return to Table of Contents
PLUMBING, TOILET AND BATH ACCESSORIES
JANUARY 2018 |PLUMBING, TOILET AND BATH ACCESSORIES S |9
DESCRIPTION NOTES
Changing Table | Koala Kare
Koala Kare: Baby changing stationsSeries: KB stainless steel with a polyethylene interiorVarious models: horizontal and vertical recessed and surface mounted.
• Appropriate for public restrooms within PEDs areas
http://www.koalabear.com/baby-changing-stations