Dependable ULTRASONIC equipment for precision cleaning ...€¦ · Dependable ULTRASONIC equipment...
Transcript of Dependable ULTRASONIC equipment for precision cleaning ...€¦ · Dependable ULTRASONIC equipment...
Dependable ULTRASONIC equipment for precision cleaning.
Sonicor Inc. 82 Otis Street
West Babylon, NY 11704
Ph: 800-864-5022 Fax: 631-920-6080
Email: [email protected] www.sonicor.com
“D” SERIES – Ultrasonic Vapor Degreasers
Standard Features:
Extended freeboard ratio to minimize diffusion losses
Manually operated sliding cover to control overhead air turbulence losses
Water separator for continuous removal of condensed atmospheric moisture from the system
Sonicor “Vapor Watch” safety circuit, with manual reset sensors, to monitor system functions, identify faults, and notify operator when maintenance or service is needed
All stainless degreaser body and countertop
Copper/Brass plumbing
Continuing the Sonicor forty year traditions of quality, performance and reliability, The Sonicor “D” series combines the rugged durability of Sonicor ultrasonic technology with state-of-the art emissions control and safety features, to produce a line of vapor degreasing systems that are preferred by hundreds of customers worldwide. All Sonicor vapor degreaser are designed with the flexibility to operate safely with a wide range of non-flammable degreasing solvents. Every Sonicor degreaser includes control features and emissions limiting features to ensure operator safety and compliance with applicable regulations.
Push-button start with “Vapor-Up” light to advise operator when system is ready to process parts
High Vapor Sensor – disables heaters and advises operator if vapors reach an unsafe height in the degreaser
High Solvent Temp. Sensor – Monitors solvent temperature in the boil chamber, and advises operator when solvent replacement is needed
Low Solvent Level Control – Disables heaters and advises operator if solvent level is low
A full stainless cabinet is available for all Sonicor “D” series vapor degreasers. The cabinet is standard on models 30 and 50. It is optional on models 70, 90, 120, and on all custom sized “D” series degreasers
Sonicor model CUDR-50Z
Ultrasonic Vapor degreaser
Sonicor “D” series vapor degreasers are offered in five standard sizes, and four basic process configurations:
SERIES PROCESS CONFIGURATION
LDW Two stage, vapor/immersion degreaser, water cooled primary condenser
LDR Two stage, vapor/immersion degreaser, with refrigerated primary condenser
UDW Two stage, vapor/ultrasonic immersion degreaser, water cooled primary condenser
UDR Two stage, vapor/ultrasonic immersion degreaser, with refrigerated primary condenser
Sonicor Incorporated 82 Otis Street, West Babylon N.Y. 11704
Ph: (631) 920-6555 Fax: (631) 920-6080 Email: [email protected]
CUDR-30Z CUDR-50Z CUDR-70Z CUDR-90Z CUDR-120Z Immersion I.D 8” X 11” X 7½” 10” X 12” X 10” 12” X 16” X 16” 16” X 20” X 16” 20” X 24” X 17”
Vapor Zone 17” X 11” X 9” 21” X 12” X 10” 25” X 16” X 12” 33” X 20” X 16” 41” X 24” X 18”
Primary Heater 1500 watts 2000 watts 4000 watts 8000 watts 12000 watts
Solvent Capacity 7 gallons 10 gallons 25 gallons 50 gallons 85 gallons
Distillation rate 5.5 GPH 7 GPH 14 GPH 28 GPH 42 GPH
Workload Capacity 150 Lbs./Hr 200 Lbs./Hr 400 Lbs./Hr 800 Lbs./Hr 1200 Lbs./Hr
Ultrasonic Power 200 watts 300 watts 600 watts 900 watts 1500 watts
Std. Electrical Req. 230V,1Ph, 18A 230V,3Ph.,28A 230V,3Ph,40A 230V,3Ph,60A 230V,3Ph,80A
Overall Dimensions 51” X 22” X 46” 55” X 28” X 48” 65” X 33” X 48” 86” X 36” X 60” 108” X 40” X 68”
Shipping Weight 350 Lbs 500 Lbs. 700 Lbs. 900 Lbs. 1100 Lbs
All stainless cabinet enclosure (standard on –15,-30, & -50 models) Add prefix “C” to model no.
Hand-held distillate spray wand Add suffix “S” to model no.
Circulating pump/filter system on immersion chamber Add suffix “F” to model no.
Sub-zero freeboard chiller system Add suffix “Z” to model no.
Power Cover (replaces std. manual cover) Add suffix “P” to model no.
All stainless solvent plumbing Add suffix “X” to model no.
“VWE-1” 30lb., automated workload elevator – Single axis Option
“VWE-2” 30lb., automated workload elevator – dual axis Option
Specifications:
Sonicor “D” series vapor degreasers are offered in five standard sizes. The chart below shows the five standard sizes all configured with stainless cabinets, refrigerated primary condenser, and refrigerated freeboard chiller (The most commonly ordered configuration):
Available Options:
Sonicor CUDR-120 Vapor Degreaser With Sonicor “RCT” Automation/Process
Control System, and full system Enclosure
Sonicor UDR-70 Vapor Degreaser With Sonicor “VWE” Vertical Workload
Elevator, and stainless upper enclosure
Made in USA Since 1966
High Intensity Sweep Frequency Ultrasonic Cleaning Systems
Standard Features:
Heavy gauge, all stainless tank construction
Stainless steel tank skirt
High-efficiency Sonicor Piezoelectric transducers
Modular, sweep-frequency power oscillator
FCC compliant EMI suppression
Available Options & Accessories:
Auto-reset, digital cycle timer
Thermostat controlled tank heater
Variable ultrasonic intensity control
Variable pulse/degas control
Stainless baskets, covers & insert trays
Sonicor Immersible Ultrasonic Transducers:
The Sonicor “BandScanner” series is the benchmark for efficiency and reliability, among industrial ultrasonic tank/generator systems. With standard tank sizes from 2.5 gallons to 60 gallons, and a wide range of available operating frequencies, these heavy-duty units can handle any ultrasonic cleaning application, and withstand the harshest industrial environment. The Sonicor “BandScanner” series, sweep frequency ultrasonic generator offers cutting edge technology, and a full range of control options and features to assure process consistency needed for even the most critical cleaning applications
Sonicor Incorporated 82 Otis Street, West Babylon N.Y. 11704
Ph: (631) 920-6555 Fax: (631) 920-6080 Email: [email protected]
To introduce Sonicor ultrasonic cleaning power into an existing process tank, or on large tanks where installation of transducers directly onto the process tank is not practical, Sonicor immersible transducers are the answer. Available in multiple mounting configurations, Sonicor immersible transducers make conversion of any tank, into an ultrasonic cleaning tank, simple and cost-effective. The modular concept of the immersible transducers, allows you to start a lower ultrasonic power level, and increase with additional immersible transducers, as production needs change
Standard Tank/Generator Systems: Standard Immersible
Transducers: GENERATOR MODEL NO./
POWER
TANK LxWxD INCHES
GAL CAP
HEATED TANK
MODEL NO.
UNHEATED TANK
MODEL NO.
LIFT-OFF COVER
MODEL NO.
PARTS BASKET
MODEL NO.
RADIATING SURFACE
MODEL*
SG-2241
225 WATTS
9x7x6 11x5x6 11x5x9
1.5 1.5 2.5
T-2245HC T-2246HC T-2248HC
T-2245 T-2246 T-2248
C-205 C-206 C-208
B-205 B-206 B-208
12” x 3” *-224H
SG-3041 300 WATTS
10x8x10 11x9x6 12x10x10 19x5x6
3.5 2.5 5
2.5
T-3049HC T-3046HC T-3045HC T-3048HC
T-3049 T-3046 T-3045 T-3048
C-309 C-305 C-306 C-308
B-309 B-305 B-306 B-308
9” x 6” 18” x 3”
*-304H *-304K
SG-6041 600 WATTS
12x10x10 12x10x25 14x10x9 14x10x12 16x12x12
5 13 5 7 10
T-6044HC T-6048HC T-6046HC T-6047HC T-6045HC
T-6044 T-6048 T-6046 T-6047 T-6045
C-305 C-305 C-406 C-406 C-605
B-305 B-608 B-405 B-607 B-605
18” x 6” 12” x 9”
*-604H *-604K
SG-9041 900 WATTS
12x10x10 16x12x12 20x12x12 20x12x16 20x16x12 20x16x16
5 10 12 16 16 22
T-9044HC T-9045HC T-9046HC T-9048HC T-9047HC T-9049HC2
T-9044 T-9045 T-9046 T-9048 T-9047 T-9049
C-305 C-605 C-906 C-906 C-907 C-907
B-305 B-605 B-906 B-908 B-907 B-1205
18” x 9” 18” x 12”
*-904H *-904K
SG-12041 1200 WATTS
16x12x12 20x12x12 20x12x16 20x16x12 20x16x16 24x12x12 24x18x18
10 12 16 16 22 15 33
T-12049HC T-12048HC T-12044HC T-12046HC T-12045HC2 T-12043HC T-12047HC2
T-12049 T-12048 T-12044 T-12046 T-12045 T-12043 T-12047
C-605 C-906 C-906 C-907 C-907 C-1203 C-1207
B-605 B-906 B-908 B-907 B-1205 B-1203 B-1207
18” x 12” *-1204H
SG-15041 1500 WATTS
20x16x16 24x18x18 24x18x24
22 33 44
T-15045HC2 T-15047HC2 T-15048HC2
T-15045 T-15047 T-15048
C-907 C-1207 C-1807
B-1205 B-1207 B-1207
Custom Custom
SG-18042 1800 WATTS
24x18x18 24x18x24 24x24x18
33 44 44
T-18046HC2 T-18047HC2 T-18048HC2
T-18046 T-18047 T-18048
C-1207 C-1207 C-1208
B-1207 B-1807 B-1808
Custom Custom
SG-24042 2400 WATTS
24x24x18 24x24x24
44 60
T-24047HC2 T-24046HC2
T-24047 T-24046
C-1208 C-1208
B-1808 B-1809
Custom Custom
* See illustration below for prefix to complete Immersible Transducer model no. e.g. IRE-604H
Immersible Transducer Configurations:
Consult factory for non-standard tanks or immersible transducers
See Sonicor price list for full ordering information
dependable ULTRASONIC equipment for precision cleaning
Made in USA Since 1966
“S” SERIES - TABLETOP ULTRASONIC CLEANERS
Standard Features:
0-60 minute mechanical cycle timer *
External contact tank heater **
Compact one piece construction
Seamless, round cornered stainless tank
Drain valve (5 quart models and larger)
Easy to use controls
Rugged steel cabinet with textured powder coated finish
Available Options & Accessories: Stainless baskets, covers & insert trays
Variable ultrasonic intensity control
Digital Model features adjustable temperature setting up to 160 degrees Fahrenheit & display with digital timer (0-99min or continuous run)
Specifications: Dimensions (left to right, front to back, top to bottom)
Continuing the Sonicor forty-year traditions of quality, performance and reliability, The Sonicor “S” series combines the rugged durability of Sonicor ultrasonic generator technology, and piezoelectric composite transducers, in an attractive powder coated steel cabinet. The “S” series is available in capacities from ¼ gallon (1 liter) to 10 gallons (39 liters). A complete line of Sonicor options and accessories, including heaters, timers, covers, baskets and insert trays, is offered to suit every precision cleaning application.
Sonicor Incorporated 82 Otis Street, West Babylon N.Y. 11704
Ph: (800) 864-5022 Fax: (631) 920-6080 Email: [email protected]
Models S-30 S-50 S-100 S-101 S-150 S-200 S-211 S-300 S-400 S-401 S-650 With Timer S-30T S-50T S-100T S-101T S-150T S-200T S-211T S-300T S-400T S-401T S-650T
With Heat S-30H S-50H S-100H S-101H S-150H S-200H S-211H S-300H S-400H S-401H S-650H
Timer & Heat N/A S-50TH S-100TH S-101TH S-150TH S-200TH S-211TH S-300TH S-400TH S-401TH S-650TH
Digital With Timer & Heat N/A S-50D S-100D S-101D S-150D S-200D N/A S-300D S-400D S-401D S-650D
Capacity (gals) 1/4 1/2 3/4 1 1-1/2 2-1/2 2-1/2 3-1/2 5 7 10
Output (watts) 40 50 100 100 150 200 200 300 400 400 600
Tank I.D. (in.) 5x5x2.5 5.5x5x4 9x5x4 9x5x6 11.5x5x6 11.5x9x6 19.5x5.5x6 12x11.5x6 20x12x6 20x12x8 16x14x11
Overall Dim(in.) 6x 6x8 7x6x8 10.5x6.5x8 10.5x6x11 12.5x7x11 12x10x11 20.5x10x11 14x12x15 21x13x 15 21x13x 18 18x16x19
Accessories:
Tank Cover C-30 C-50 C-100 C-100 C-150 C-200 C-211 C-300 C-400 C-401 C-650
Parts Basket BM-30 BM-50 BM-100 BM-101 BM-150 BM-200 BM-211 BM-300 BM-400 BM-401 BM-650
Insert Tray IT-30 IT-50 IT-100 IT-101 IT-150 IT-200 IT-211 IT-300 IT-400 IT-400 N/A
* Heater not offered on S-30 series ** S-650TH provided with a heavy-gauge, square cornered tank
The Sonicor “IT” series offers the performance and reliability of Sonicor “BandScanner” sweep-frequency ultrasonics, in a complete line of rugged, large capacity, industrial ultrasonic cleaning systems. These systems are designed to fully address critical industrial parts cleaning applications with the power and design flexibility of our Sonicor ultrasonic generators and immersible ultrasonic transducers. The fully integrated heating and filtration systems that are included on each “IT” system, minimize the need for additional process equipment, allowing for easy system installation. In addition to the standard tanks listed below, custom tank configurations are also available.
SONICOR “IT” SERIES, LARGE VOLUME ULTRASONIC
CLEANING TANKS WITH IMMERSIBLE TRANSDUCERS, HEAT, AND FILTRATION SYSTEMS
MODEL TANK I.D.
LxWxD CAP
SONIC POWER
TRANSDUCER CONFIG
HEAT INPUT PWR
IT-130 36”X 24”X 36” 130 GAL 3600W 40KHz
(3) IBE-1204/2210 12KW 220/240
3PH, 42A
IT-180 48”X 24” 36” 180 GAL 4500W 40KHz
(3) IBE-1504/2214 15KW 220/240
3PH, 52A
IT-200 36”X 36” X 36” 200 GAL 6000W 40KHz
(4) IBE-1504/1515 18KW 440/480
3PH, 31A
IT-220 60”X 24”X 36” 220 GAL 6000W 40KHz
(4) IBE-1504/2213 18KW 440/480
3PH, 31A
IT-260 48”X 36”X 36” 260 GAL 7500W 40KHz
(5) IBE-1504/3208 24KW 440/480
3PH, 42A
IT-330 60”X 36”X 36” 330 GAL 9000W 40KHz
(6) IBE-1504/3208 36KW 440/480
3PH, 56A
IT-475 48”X 48”X 48” 475 GAL 12000W 40KHz
(8) IBE-1504/2211 45KW 440/480
3PH, 72A
IT-600 60”X 48”X 48” 600 GAL 15000W 40KHz
(10) IBE-1504/2211 48KW 440/480
3PH, 80A
IT-750 60”X 60”X 48” 750 GAL 18000W 40KHz
(10) IBE-1804/2811 60KW 440/480
3PH, 100A
Standard Features:
All stainless tank fabrication
Peripheral tank drip-lip
Copper/Brass pump/plumbing
Stainless immersion heaters
Thermal insulation
Low liquid level protection
Available Options:
Stainless plumbing
Oil skimmer/separation systems
Non-standard input power configurations
Parts baskets and custom parts handling fixtures
Digital temperature controllers
Auto-reset digital cycle timer
1. All prices are F.O.B. factory, West Babylon, NY 2. Consult factory for terms of payment 3. All prices are subject to change without notice 4. Consult factory for pricing of options & non-standard tank configurations
Sonicor Incorporated 82 Otis Street, West Babylon, N.Y. 11704
Phone: (800) 864-5022 Fax: (631) 920-6080 www.sonicor.com E-mail: [email protected]
IT-0315 March 05, 2015
SONICOR IMMERSIBLE TRANSDUCERS FOR USE WITH
“BandScanner” ULTRASONIC GENERATORS
IMMERSIBLE TRANSDUCER GENERATOR120 VOLT GENERATOR240VOLT
SIZE (Radiating Surface)
POWER WATTS
MODEL NO. MODEL NO. MODEL NO.
12” x 3” 225 (*)-224H SG-2241 SG-2242
9” x 6” 18” x 3”
300 300
(*)-304H (*)-304K
SG-3041 SG-3041
SG-3042 SG-3042
18” x 6” 12” x 9” 22” x 5”
600 600 600
(*)-604H (*)-604K (*)-604P
SG-6041 SG-6041 SG-6041
SG-6042 SG-6042 SG-6042
18” x 9” 18” x 12”
900 900
(*)-904H (*)-904K
SG-9041 SG-9041
SG-9042 SG-9042
18” x 12” 1200 (*)-1204H SG-12041 SG-12042
OPTION - All Sonicor immersible transducers are available with a hard chrome plated radiating surface for increased resistance to erosion wear – add “C” to end of model number, and add option price as follows:
IMMERSIBLE MOUNTING CONFIGURATIONS:
Sonicor Immersible transducers are offered in a variety of mounting configurations to address both new equipment and retrofits into existing process tanks: IB Bulkhead Mounting fitting(s) with an 8 foot coaxial RF cable/connector assembly protrude from the immersible
and pass directly through the bottom or sidewall of tank, The coaxial connector(s) correspond to the output connector(s) on the ultrasonic generator. All IB series immersible transducers are sold at the prices shown above.
IS IS series immersible transducers are provided complete with a 4 foot stainless steel/teflon hose to route the
transducer RF cable safely above the liquid level of the tank. An 8-foot RF cable with the appropriate generator connector protrudes from the end of the stainless steel/Teflon hose, to complete the connection from the immersible transducer to the ultrasonic generator.
IR IR series immersible transducers are provided with an 18” rigid stainless steel pipe assembly to route the
transducer RF cable safely above the liquid level of the tank. An 8-foot RF cable with the appropriate generator connector is provided to complete the connection from the immersible transducer, to the ultrasonic generator.
FITTING LOCATIONS:
The third letter in each immersible transducer model no. Prefix indicates the type and position of the fitting(s) that
are welded on the immersible body. To complete the model no., select the appropriate prefix from the chart below, and insert it into the immersible transducer model shown above (*):
PREFIX MOUNTING CONFIGURATION
IBB- Bulkhead fittings on bottom of immersible transducer
IBE- Bulkhead fittings on end (narrow side) of immersible transducer
IBS- Bulkhead fittings on side (wider side) of immersible transducer
ISM- Stainless/Teflon hose from welded elbow on end of immersible transducer
ISE- Stainless/Teflon hose from end of immersible transducer, perpendicular to radiating surface
ISC- Stainless/Teflon hose from end of immersible transducer, parallel to radiating surface
IRE- Pipe from welded elbow on end of immersible transducer, perpendicular to radiating surface
IRC- Pipe from welded coupling on end of immersible transducer, parallel to radiating surface
NOTES:
1. Consult factory for non-standard immersible transducer sizes & mounting configurations 2. All immersible transducers and generators listed are configured for operation at 40Khz, as indicated by the
frequency designator “4” in each model number. Consult factory for prices. 3. All listed items are available for 27Khz operation, (use frequency designator “2” in model numbers, when ordering)
Consult factory for price information
Sonicor Incorporated 82 Otis Street, West Babylon, N.Y. 11704
Phone: (631) 920-6555 Fax: (631) 920-6080 www.sonicor.com E-mail: [email protected]
SG2-0512 May 1, 2012
January 29, 2013
Since 1966, Sonicor industrial tank/generator ultrasonic cleaning systems have been the benchmark for performance and reliability. The Sonicor BC series combines the performance and state-of-the-art technology of our “BandScanner” sweep-frequency generator, with the heavy-duty construction and rugged reliability of Sonicor industrial ultrasonic cleaning tanks, in a self-contained tabletop cleaning system. These high performance heavy-duty systems are offered in four sizes, from 5 gallons to 22 gallons. Each model is completely self-contained in a durable, all-stainless cabinet, with an easy-access, front mounted control panel. Each BC model is equipped with a tank temperature control system, and an ultrasonic cycle timer. Sonicor’s all-digital control system is offered as a no-cost option.
SONICOR BC SERIES INDUSTRIAL ULTRASONIC CLEANING SYSTEMS
Standard Features: All stainless tank fabrication
Drain valve
Ultrasonic intensity control
Variable pulse/degas control
Stainless lift-off tank cover
Cabinet handles
Cleaning cycle timer
Process temperature control system
Available Options: Digital control system (no-cost option)
Analog control system (no cost option)
27 KHz sweep frequency (replaces std 40KHz – available on 10 gal. & 22 gal. systems only)
Stainless steel parts basket
Made in USA Since 1966
Sonicor Incorporated 82 Otis Street, West Babylon, N.Y. 11704
Phone: (631) 920-6555 Fax: (631) 920-6080
www.sonicor.com [email protected]
800-864-5022
Dependable ULTRASONIC equipment for precision cleaning
Self-Contained, Full Function, Industrial Ultrasonic Cleaning
Systems
Model: Digital Controls BCD-5 BCD-7 BCD-10 BCD-22
Analog Controls BCA-5 BCA-7 BCA-10 BCA-22 Price: $2,399 $2,999 $3,999 $4,999
Tank I.D. 12”X 10”X 10” 14”X 10”X 12” 16”X 12”X 12” 20”X 16”X 16” Capacity 5 gallons 7 gallons 10 gallons 22 gallons Ultrasonic Power:
RMS Watts 300 400 600 900 Peak Watts 425 575 850 1275
Transducers 6 8 12 18 Ultrasonic Frequency 40KHz 40KHz 40KHz or 27KHz 40KHz or 27KHz Heat Watts 500 800 1200 1600 Input Voltage 120 120 120 220 Input Current 7 amps 9 amps 13 amps 14 amps Tank Drain ½” ½” ½” ¾” Tank Material 14 ga 316L SS 14 ga 316L SS 14 ga 316L SS 14 ga 316L SS Cabinet Material 304 Stainless 304 Stainless 304 Stainless 304 Stainless Cabinet O.D. 20”X 16”X 17” 22”X 16”X 19” 24”X 18”X 19” 28”X 22”X 23” Basket (optional) B-305 B-607 B-605 B-1205
Basket Price: $200 $270 $270 $305
Control Options
Analog Controls: Green illuminated, 2 position heat on/off switch (BCA Models) 60-180F variable temperature control thermostat 0-60 minute mechanical Ultrasonic cycle timer
Digital Controls: User programmable microprocessor controlled (BCD Models) 60-180F variable temp. control thermostat with display 0-90 minute Ultrasonic cycle timer with digital display
Specifications
Sonicor Incorporated 82 Otis Street, West Babylon, N.Y. 11704
Phone: (631) 920-6555 Fax: (631) 920-6080
www.sonicor.com [email protected]
800-864-5022
Visit our website at
www.sonicor.com
Dependable ULTRASONIC equipment for precision cleaning
Sonicor “AW” series, vertical agitation parts cleaning systems utilize a multiple-technology approach to address each critical parts cleaning application. Gross contaminants on external part surfaces and in flow-thru internal surfaces are removed by the aggressive mechanical action of vertical agitation in the heated aqueous detergent solution. Parts with a more complex geometry however, may include blind holes and internal surfaces that can trap contaminants, and are not effectively cleaned by vertical agitation alone. These hard-to-clean areas are penetrated by the optional Sonicor “BandScanner” sweep-frequency ultrasonics, to complete the job All Sonicor agitation washers are constructed of heavy gauge stainless steel to ensure durability and reliability, even in the harshest industrial environment. Available filtration, turbulation, and oil separation systems provide the process control and flexibility needed to ensure parts cleaning consistency as production requirements change.
SONICOR “AW” SERIES VERTICAL AGITATION PARTS CLEANING SYSTEMS
Standard Features: All stainless tank fabrication
Hard Chrome plated Immersibles
Stainless immersion heaters
Thermal insulation
Low liquid level protection
Auto-reset digital cycle timers
Available Options: Non-standard input power configurations
Heat system, with stainless immersion heaters, digital temperature controllers & thermal insulation
Sonicor sweep-frequency Ultrasonics with hard chrome plated immersible transducers
Continuous oil sweep/removal systems
Circulating filter & turbo-filter combo systems
Made in USA Since 1966
Sonicor Incorporated 82 Otis Street, West Babylon, N.Y. 11704
Phone: (631) 920-6555 Fax: (631) 920-6080
www.sonicor.com [email protected]
800-864-5022
MODEL
TANK I.D. LRxFBxD
System O.D. LRxFBxH
CAP SONIC * POWER
HEAT* Basket I.D. Max Load
INPUT PWR
AW-20 20”X 23”X 26” 23”X 32”X 68”
50 GAL
1800W 40KHz
6KW 16”X 15”X 6” 150Lbs. 220/240
3PH, 15A
AW-30 30”X 23”X 26”” 33”X 32”X 68”
75 GAL
2400W 40KHz
6KW 26”X 15”X 6” 150Lbs. 220/240
3PH, 15A
AW-40 40”X 23”X 26” 43”X 32” X 68”
100 GAL
3000W 40KHz
9KW 36”X 15”X 6” 150Lbs. 220/240
3PH, 22A
AW-50 50’’X 23x’ 26’ 53”X 32”X 68”
130 GAL
3600W 40KHz
12KW 46”X 18”X 6” 150Lbs. 220/240
3PH, 29A
Sonicor AW series Vertical Agitation Parts Cleaning
Systems
* Optional
The Sonicor Ultrasonic Anilox Cleaning System is specifically designed to restore cell volume, without damaging the delicate cell walls on high screen count anilox rolls. The Sonicor system is equally effective on chrome plated cylinders, providing superior cleaning, in less time than any other available roll cleaning technology. The cleaning process is simple. The contaminated cylinder is immersed in the heated solution in the ultrasonic cleaning tank. The high frequency ultrasonic sound waves produce an intense microscopic scrubbing action that penetrates into the cells of the cylinder surface completely removing residual inks, along with any other contaminants. The Sonicor system features the superior performance and reliability of Sonicor “BandScanner” sweep frequency ultrasonics, stainless steel immersion heaters, a circulating pump/filter system, and a heavy duty cylinder rotation system. Critical process time, temperature, and ultrasonic intensity are all carefully controlled to optimize cleaning and ensure process consistency.
SONICOR “CY” SERIES
ULTRASONIC ANILOX CLEANING SYSTEMS WITH HEAT, AND FILTRATION SYSTEMS
Standard Features: All stainless tank fabrication
Hard Chrome plated Immersibles
Stainless immersion heaters
Thermal insulation
Low liquid level protection
Available Options: Non-standard input power configurations
Digital temperature controllers
Auto-reset digital cycle timer
Made in USA Since 1966
Sonicor Incorporated 82 Otis Street, West Babylon, N.Y. 11704
Phone: (631) 920-6555 Fax: (631) 920-6080
www.sonicor.com [email protected]
CY-0213 February 12, 2013
MODEL
TANK I.D. LxWxD
CAP SONIC
POWER HEAT
Max OA Roll length
Max Anilox Face length
Max Roll Dia
INPUT PWR
CY-4808 48” X 8” X 18” 20 GAL
900W 40KHz
2.4KW 45” 26” 6” 220/240
1PH, 20A
CY-7210 72”X 10” X 19”” 44 GAL
2400W 40KHz
4.8KW 70” 57” 8” 220/240
3PH, 20A
CY-9612 96”X 12” X 21” 80 GAL
3000W 40KHz
9KW 93 57” 10” 220/240
3PH, 33A
CY-12016 120”X 16”X 24” 160 GAL
5400W 40KHz
12KW 116” 74” 14” 440/480
3PH, 25A
CY-14418 144”X 18”X 26” 225 GAL
7200W 40KHz
18KW 140” 101” 16” 440/480
3PH, 34A
Sonicor model CY-9616 Ultrasonic Anilox Cleaning System
Contact factory for additional standard or custom sizes