DENTIS IMPLANT The cleanest implant in the world

DENTISIMPLANTThe cle a n e st implant in the wo r l d

_Dentis Implant

System Selection Guide

_Clinical Cases

_Published Articles

Su-Gwan Kim, DDS, MSD, PhD

Dentis Co. was established in March 2005 with the goal of manufacturing the

c le a n e st implants poss i b le and providing the best value to patients. Today, our ce l l

phones are used worldwide. Although they have been in production for about 25 years,

we have ca p t u red more than 20% of the world market share because of superior

functions and quality. Similar to cell phones, Dentis has also focused on become the

best in the implant field worldwide by responding to changing market conditions and

meeting customers’ needs.

In addition to becoming a re co g n i z a b le brand in the implant market, Dentis

m a kes the cle a n e st implants ava i l a b le with the gre a te st degree of precision and the

best technique. Consequently, Dentis is striving to become the leader in the Korean

implant market.

Dentis hopes to restore the happiness of its patients with a natural smile, and

plans to expand the implant industry in Korea to other countries. Dentis will deliver the

b e st quality, and aims to become the company re p resenting Korean implants

worldwide.

This book is constructed for readers to understand readily, and it would provide

i m p o r tant know ledge and information not only to beginners but also to dentists who

require advanced approaches. We hope that this book facilitates the understanding of

the introduction of Dentis, clinical cases, and research papers while becoming a useful

guideline of clinical techniques for better basic research and clinics.

Finally, I thank Gi-Bong Sim, President of the Dentis implant who was in charge

of consulting and providing all supports and encouragement until the publication of this

book, KiYoung Park, President of JeeSung Publishing Company, and the staff of our

Department of Oral and Maxillofacil Surgery.

Su-Gwan Kim

PR E FA C E . . .

Department of Oral and Maxillofacial SurgeryCollege of Dentistry, Chosun University421, SeoSukDong, DongGuGwangJu City, Korea 501-825☏ 82-62-220-3815, Fax : 82-62-228-7316E-mail : [email protected]

Professor Su-Gwan Kim. DDS, MSD, PhD

Education● PhD, Chonnam University, August 1998.

● MSD (Master of Dental Surgery), Chosun University, February 1992.

● Bachelor, Chosun University, February 1989.

Career History● Visiting Professor at Department of Biomedical Engineering, University of Texas at San Antonio, TX,

USA (January 2008 - January 2009).

● Previously a Lecturer and presently a Professor, Chosun University, College of Dentistry (May 1996 -

present).

● Chairman of the Department of Oral and Maxillofacial Surgery, Chosun Dental Hospital (September

1999 - present).

● Director of Oral and Maxillofacial Surgery, Chosun University, College of Dentistry (September 1999

- present).

● Captain in dental examination and treatment, Chosun Dental Hospital (May 2007 - December 2007).

● Vice-Dean of the College of Dentistry (June 2004 - August 2005).

● Captain in Education, Chosun Dental Hospital (September 2001 - June 2004).

Leadership Activities● Congress Chairman for the 3rd International Congress of Oral Implantologists Korea (2007).

● Congress Chairman at the Korean Academy of Oral and Maxillofacial Implantology (2006).

● Congress Chairman for the Korean Association of Maxillofacial Plastic and Reconstructive Surgeons

(2004).

Career-related Activities ● Member of many professional organizations: International Congress of Oral Implantologists (ICOI),

the Academy of Osseointegration, the European Association for Osseointegration, the American

Association of Oral and Maxillofacial Surgeons, the International Association of Oral and Maxillofacial

Surgeons, the American College of Oral Maxillofacial Surgeons, Society for Biomaterials, the Official

Journal of The Asian Association of Oral and Maxillofacial Surgeons, the Academy of Laser

Dentistry, the International Association of Dental Research, the Korean Association of Maxillofacial

Plastic and Reconstructive Surgeons, the Korean Cleft lip and Palate Association, and the Korea

Dental Society of Anesthesiology.

Career-related Activities (continued)● Noted in the “Noteworthy Name Dictionary” (biographies of educators and researchers from around

the world and from every significant field of endeavors) 37 times; Marquis Who’s Who in the World

(2004 - 2009), Marquis Who’s Who in Medicine and Healthcare (2004 - 2007), Marquis Who’s Who

in Science and Engineering (2005 - 2009), Marquis Who’s Who in Asia (2006 - 2007), the

International Biographical Centre (2004 - 2008), and the American Biographical Institute (ABI) (2004

- 2008).

● Member of WR Laney Award Committee (Academy of Osseointegration).

Creative Works ● Published over 463 publications in scientific journals (386) and books (77). These titles include:

“Osteogenic activity of the mixture of chitosan and particulate dentin” which was published in J

Biomed Mater Res A (2008).

● Editor-in-Chief in Journal of Korean Implant Dentistry (January 2007 - present)

● Reviewed for the following journals: 1) Biomaterials, 2) World Journal of Surgical Oncology, 3) Oral

Oncology, 4) Journal of Nanoscience and Nanotechnology, 5) Computer Methods and Programs in

Biomedicine, 6) Asian Journal of Oral and Maixllofacial Surgery, 7) MATERIAIS 2007, 8) Journal of

Biomedical Materials Research: Part B - Applied Biomaterials, 9) European Journal of Dentistry, 10)

Acta Stomatologica Croatica (ASCRO), 11) Archives of Oral Biology, 12) European Journal of

Dentistry, 13) Indian Journal of Cancer, 14) Journal of Korean Maxillofacial Plastic and

Reconstructive Surgery, and 15) Korean Academy of Oral and Maxillofacial Implantology.

● Editorial board in Institute of Medical Science, Chosun University (2008 -present ).

● Funded ($1,300,000) through government and companies.

Honors● Numerous national and international prizes, medals, and honours.

● 64 awards including a Lifetime Achievement One Hundred from the International Biographical Centre

(IBC, 2004, 2005, 2006), a Presidential Award (scholarship for research) from the Korean Health

Industry Development Institute (2003).

Achievements ● 1 international patent, 21 domestic patents.

● Restorative and grafting material for hard tissue defect and fabrication method using animal teeth.

CO N T E N T S . . .

Part. 1Dentis Implant System Selection Guide

Ⅰ. Dentis Implant System Selection GuideⅡ. Characteristics of Dentis Implant System

Ⅲ. Uses of Dentis Abutment SystemⅣ. Components of Dentis Products

Ⅴ. Dentis Surgical KitⅥ. Surgical Kit and Tool

Ⅶ. Abutment Prosthetic Protocol

1 21 72 53 18 39 19 9

1. Maxillary anterior teeth2. Sinus lift (1)

Sinus lift (2)Sinus lift (3)Sinus lift (4)Sinus lift (5)Sinus lift (6)Sinus lift (7)

3. Maxillary posterior teeth (1)Maxillary posterior teeth (2)

4. Mandibular anterior teeth5. Mandibular posterior teeth (1)

Mandibular posterior teeth (2)Mandibular posterior teeth (3)Mandibular posterior teeth (4)

6. Guided bone regeneration (GBR)7. Overdenture (1)

Overdenture (2)8. Horizontal alveolar bone distraction using a distractor

1 2 61 3 01 3 41 3 81 4 11 4 41 4 71 5 01 5 21 5 51 5 81 6 21 6 51 6 71 7 01 7 31 7 61 7 91 8 2

Part. 2Clinical Cases

Implant placement using the SAVE implantRestoration of a partial edentulous ridge with a Dentis implant: A case report

Effect of vertical distraction osteogenesis using a nitrified distractor on the osseointegration of Dentis implantsI N D E X

1 9 11 9 72 0 32 1 0

Part. 3Published Articles

Part. 1Dentis Implant System Selection Guide

Dentis Implant SystemSelection Guide

Part 1

Ⅰ

1. Fixture System Selection Guide2. Abutment System Selection Guide

ø4.8

2.0㎜

ø3.0

ø3.7

L

ø4.8

2.0㎜

ø3.6

ø4.3

L

ø3.7

0.4㎜

ø3.0

L

ø4.3

0.4㎜

ø3.6

L

ø4.8

0.4㎜

ø4.1

L

ø4.8

2.0㎜

ø4.1

ø4.8

L

0.65㎜

0.65㎜

0.65㎜

ø3.7 / Length : 8, 10, 12, 14mm ø3.7 / Length : 8, 10, 12, 14mm



12

1. Fixture System Selection Guide

Ⅰ. Dentis Implant System Selection Guide

ø3.5

0.7㎜

ø2.8

L

ø4.1

0.7㎜

ø3.4

L

ø5.1

0.7㎜

ø4.4

L

ø3.5 / Length : 8, 10, 12, 14mm

ø4.1 / Length : 8, 10, 12, 14mm

ø5.1 / Length : 8, 10, 12, 14mm

● I N T E R N A L ● S U B M E R G E D ● I N T E R N A L

13Ⅰ. Dentis Implant System Selection Guide ｜

Part 1

ø5.5 Int. ø6.0 Int. ø5.5 Sub. ø6.0 Sub.

ø6.0

12.0㎜

0.4㎜

ø5.3

ø6.0

10.0㎜

0.4㎜

ø5.3

ø6.0

8.0㎜

0.4㎜

ø5.3

ø6.0

7.0㎜

0.4㎜

ø5.3

ø6.0

12.0㎜

0.65㎜

ø5.3

2.0㎜

ø6.0

10.0㎜

0.65㎜

ø5.3

2.0㎜

ø6.0

8.0㎜

0.65㎜

ø5.3

2.0㎜

ø6.0

7.0㎜

0.65㎜

ø5.3

2.0㎜

ø5.5

12.0㎜

0.4㎜

ø4.8

ø5.5

10.0㎜

0.4㎜

ø4.8

ø5.5

8.0㎜

0.4㎜

ø4.8

ø5.5

7.0㎜

0.4㎜

ø4.8

Length : 7mm

Length : 8mm

Length : 10mm

Length : 12mm

Length : 7mm

Length : 8mm

Length : 10mm

Length : 12mm

ø6.0

ø5.5

ø5.5

12.0㎜

0.65㎜

2.0㎜

ø4.8

ø6.0

10.0㎜

0.65㎜

2.0㎜

ø4.8

ø6.0

8.0㎜

0.65㎜

2.0㎜

ø4.8

ø5.5

ø6.0

7.0㎜

0.65㎜

2.0㎜

ø4.8

ø5.5

● SAVE Internal ● SAVE Submerged

14

2. Abutment System Selection Guide

● F i x t u r e ● A b u t m e n t ● Gold Cylinder

C e m e n t e d

Estheticone

Octa

InOcta

Internal Fixture

External Fixture

Cover Screw

Cover Screw

M o u n t

Healing Abutment

Octa Abutment O c t a N - O c t aGold Cylinder

O c t a N - O c t aGold UCLAAngled Abutment (15。. 25。) SynOcta Abut.InOcta Abut.Free Abutment

Healing A b u t m e n t

Angled Abutment (15。. 25。)Cemented Abutment

Estheticone Abutment

H e x N - H e xGold UCLA

H e x N - H e xGold Cylinder

Solid

Solid Abutment

4 m m 5 . 5 m m 7 m m 4 m m 5 . 5 m m 7 m m

Excellent Solid Abutment

Sub-Octa

Couple

Sole

Submerged Fixture

Cover Screw

Healing Abutment

O c t a N - O c t aGold Cylinder

Angled Abutment (15。. 25。)Couple Abutment H e x N - H e xGold UCLAFree Abutment

Sub-Octa Abutment

Sole Abutment 4 . 5 m m 5 . 5 m m 6 . 5 m m

15Ⅰ. Dentis Implant System Selection Guide ｜

Part 1

● Plastic Cylinde / Coping ● Impression Coping / Cap ● Lab Analog ● O - r i n g

O c t a N - O c t aPlastic Cylinder

H e x N - H e xPlastic UCLA

H e x N - H e xPlastic Cylinder

S i n g l e B r i d g ePlastic Coping

Lab Analog

Lab Analog

Lab AnalogA b u t m e n t

Lab Analog

A b u t m e n t

Lab Analog

Lab Analog

R e t a i n e r

O - R i n g

R e t a i n e r

P i c k - U p T r a n s f e rImpression Coping




Positioning CylinderImpression Cap Shoulder Analog & Pin Lab Analog

R e t a i n e r

A b u t m e n t

Lab Analog

O c t a N - O c t aPlastic Cylinder Lab Analog



H e x N - H e x

H e x N - H e x

H e x N - H e x Lab Analog

O c t a

N - O c t a

S i n g l e B r i d g ePlastic Coping Impression Cap Lab Analog

H e x N - H e x

H e x

N - H e x

O - R i n g

O - R i n g

C h a racteristics of DentisImplant System

Part 1

Ⅱ

1. Surface Treatment2. Advantage of RBM(Resorbable Blast Media)3. Cleaning System4. Results of the cleaning5. Characteristics of Dentis Implant

18

1. Surface Treatment

Ⅱ. Surface treatment & Cleaning

19Ⅱ. Characteristics of Dentis Implant System ｜

Part 1

2. Advantage of RBM(Resorbable Blast Media)

20

3. Cleaning System


Part 1

4. Results of the cleaning

22

5. Characteristics of Dentis Implant

1. The 3 types of fixture design can be used in various cases.

Its products have been developed to be applied to various clinical cases and provide 3 types of

fixture, Internal, External and Submerged for parts that need esthetics and according to the

condition of the bone.

2. Convenient Compatibility of Superstructure

Dentis Implant is economical to use with the certain products such as Branemark, ITI, Astra,

and Swissplus implants.

3. Micro-thread for Bone Loss Prevention

Dentis Implant Micro-thread minimizes bone loss, breaking due to internal stress and appro-

priate stimulus of the cortical bone together with stable initial fixation.

4. Taper Design and Rotating Safe Cutting Edge for Smooth Drilling

It has been designed for excellent osseointegration as well as excellent initial fixation

as it remarkably reduces excessive friction with the bone due to uniform transmission

of strength during insertion owing to Dentis fixture’s safe cutting edge that follows the

direction of the rotation. The cutting edge is on the whole body of the fixture and has

taper design and double thread.

×5 01 3 4


Part 1

5. Optimum RBM Surface Treatment

Roughness measurement of the surface is Ra: 1.5~1.8um. This measurement

is the most ideal value for osseointegration.

6. External Fixture Mount Used For I m p r e s s i o nand Abutment

External Fixture Mount is economical and makes it simple for dental

prosthetics. Mount could be used as Impression Coping (Transfer) and Final

Abutment, after insertion.

7. Internal/ Internal Submerged Fixture is a No-Mount System

During surgery, existing Mount System obstructs the range of vision and the

distance between the upper and lower teeth, however Dentis No-mount sys-

tem can immediately ensure a path during surgery and reduces operation

time and attains accurate operation with no effects by the surrounding teeth.

×5 , 0 0 05 6 7

Uses of Dentis AbutmentS y s t e m

Part 1

Ⅲ

1. Uses of Internal Abutment System2. Uses of Submerged Abutment System3. Uses of External Abutment System

26

Ⅲ. Uses of Dentis Abutment System

Internal1) Uses of Solid Abutment

Generally, it is used when getting the Abutment Level impression of Internal Type and can be

used in all cases, single unit and multi unit, to make Cemented Type prosthesis.

2) Uses of Excellent Abutment

In molar cases, when abutment is smaller than the size of the prosthesis, it increases the size of

the normal solid abutment, and possesses stability.

3) Uses of InOcta Abutment

It is used for making SCRP dental prosthesis and in choosing cuff of the abutment to suit the

thickness of the gingiva when part of the implant shoulder is being drilled under the gums and

getting an impression in the fixture level.

4) Uses of SyncOcta Abutment

It can be used in all cases, single unit and multi unit and getting an impression in the fixture

level. As all stages of dental prosthesis production is possible in the lab, chair time is reduced.

This is Cemented Type and is possible to make SCRP dental prosthesis.

1. Uses of Internal Abutment System

27Ⅲ. Uses of Dentis Abutment System ｜

Part 1

5) Uses of Gold ULCA Abutment

It is used when the opposing of surfaces of the teeth of the two jawbones does not come

into contact and the dentist makes screw type prosthesis.

6) Uses of Angulated Abutment

It is prepared in 15 and 25 degrees and can be used in cases to compensate for the angle and

the insertion path is not good.

7) Uses of Octa Abutment

It is used when prosthesis requires Screw Type, or cases of multiple unit that does not have

a good path.

8) Uses of O-Ring Abutment

It is used for over denture.

28

S u b m e r g e d1) Uses of Sole Abutment

Generally, it is used when getting the Abutment Level impression of Submerged Type and can

be used in all cases, single unit and multi unit, to make Cemented Type prosthesis.

2) Uses of Couple Abutment

It can be used in all cases, single unit and multi unit and getting an impression in the fixture and

abutment level. As all stages of dental prosthesis production is possible in the lab, chair time is

reduced. This is Cemented Type and is possible to make SCRP dental prosthesis.

3) Uses of Gold UCLA Abutment

It is used when the opposing of surfaces of the teeth of the two jawbones does not come into

contact and the dentist makes screw type prosthesis.


It is prepared in 15 and 25 degrees and can be used in cases to compensate for the angle and the

insertion path is not good.

5) O-Ring Abutment


2. Uses of Submerged Abutment System

29Ⅲ. Uses of Dentis Abutment System ｜

Part 1

External1) Uses of Cemented Abutment

Generally, it is used when making dental prosthesis of the Cemented Type.

2) Uses of Estheticone Abutment

It is used when prosthesis requires Screw Type, or cases of multiple unit that does not

have a good path.


It is prepared in 15 and 25 degrees and can be used in cases to compensate for the

angle and the insertion path is not good.

4) Uses of Gold UCLA Abutment

It is used when the opposing of surfaces of the teeth of the two jawbones does not

come into contact and the dentist makes screw type prosthesis.

5) O-Ring Abutment


3. Uses of External Abutment System

C o m ponents of DentisP rod u c t s

Part 1

Ⅳ

1. Dentis Internal Implant System Flow2. Dentis Submerged Implant System Flow3. Dentis External Implant System Flow4. Dentis SAVE Submerged Implant System Flow5. Dentis SAVE Internal Implant System Flow

32

1. Dentis Internal Implant System Flow

Internal Fixture

Ⅳ. Components of Dentis Products

“C o n v e n i e n t”No Mount System

During surgery, existing Mount System obstructs the range of vision and

the distance between the upper and lower teeth, however Dentis No-

mount system can immediately ensure a path during surgery and

reduces operation time and attains accurate operation with no effects

from the surrounding teeth.

O c t a

Octa Connection prosthesis is compatible with superstructures of ITI

and Swissplus.

Tapered design

Root Form Design achieved superb initial fixation strength also in places

where condition of the bone is not good, makes an easy and stable

surgery possible and reduces surgery time.

Micro-Thread for Bone Loss Prevention

It prevents water absorption of the cortex due to bacterial infection and

minimizes bone loss, breaking due to internal stress and stimulus of the

cortical bone with stable initial fixation strength and wedges in thin cor-

tex as well.

RBM Surface Treatment (1.5-1.8um)

It maximizes osseointegration.

Safe cutting edge

It minimizes resistance of the bone during insertion of the implant and

functions to provide safe and smooth insertion.

Self-tapping Groove

It helps self-tapping during the insertion of the implant and at the same

time be the space for bone chips. In addition, boost fixation strength

after insertion.

2.0mm

Machined collar

×5 , 0 0 0

33Ⅳ. Components of Dentis Products ｜

Part 1

W i d e

P l a t f o r mD i a m e t e r

L e n g t h C o d e

ø4 . 8

8 . 0 m m

1 0 . 0 m m

1 2 . 0 m m

1 4 . 0 m m

D I F W R 4 8 0 8

D I F W R 4 8 1 0

D I F W R 4 8 1 2

D I F W R 4 8 1 4

I m p l a n tD i a m e t e r

ø4 . 8

R e g u l a r

P l a t f o r mD i a m e t e r L e n g t h C o d e

ø4 . 8

8 . 0 m m

1 0 . 0 m m

1 2 . 0 m m

1 4 . 0 m m

D I F R 4 3 0 8

D I F R 4 3 1 0

D I F R 4 3 1 2

D I F R 4 3 1 4


ø4 . 3

M i n i


L e n g t h C o d e

ø4 . 8

8 . 0 m m

1 0 . 0 m m

1 2 . 0 m m

1 4 . 0 m m

D I F M 3 7 0 8

D I F M 3 7 1 0

D I F M 3 7 1 2

D I F M 3 7 1 4


ø3 . 7

Internal Implant System Products

ø4.8

2.0㎜

ø3.0

ø3.7

L

ø4.8

2.0㎜

ø3.6

ø4.3

L

ø4.8

ø4.8

ø4.8

ø4.8

2.0㎜

ø4.1

ø4.8

L

34

Prosthetic Flow Diagrams for Internal Type Implant

1) Solid Abutment System

Solid AbutmentSolid Abutment Driver Excellent Solid Abutment DriverExcellent Solid Abutment

Shoulder Analog & Pin

Lab Analog

Plasitc Coping

Healing Abutment 1.2 Hex Driver

Internal Fixture

Cover Screw

B r i d g eS i n g l e

Impression Caps Positioning Cylinder


Part 1

Closing Screw

Cover Screw CuffPlatform Diameter Code No.DICS12mmØ4.8

CuffPlatform Diameter Code No.DICS30mmØ4.8

2m m

Solid Abutment System

LengthPlatform Diameter Code No.DISA40DISA55DISA70

4mm5.5mm7mm

Ø4.8

Solid Abutment

L: 4, 5.5, 7m

Healing Abutment CuffPlatform Diameter Code No.DIH30DIH40DIH55

3mm4mm

5.5mm

Ø4.8

Cuff: 3, 4, 5.5m m

36

TypePlatform Diameter Code No.DISIPCRØ4.8

Positioning Cylinder

LengthPlatform Diameter Code No.DIESA40DIESA55DIESA70

4mm5.5mm7mm

Ø4.8

TypePlatform Diameter Code No.DISICRØ4.8

Impression Cap

Excellent Solid Abutment

L: 4, 5.5, 7m


Part 1

Platform Diameter Code No.DIISARØ4.8

Shoulder Analog & Pin

LengthPlatform Diameter Code No.DISLA40DISLA55DISLA70

4mm5.5mm7mm

Ø4.8

Lab Analog

L: 4, 5.5,7mm

TypePlatform Diameter Code No.DISPSDISPB

SingleBridge

Ø4.8

Plasitc Coping

B r i d g e

S i n g l e

Solid Abutment System

38

Impression Coping(Pick-up) Impression Coping(Transfer)

Lab Analog


Internal Fixture

Cover Screw

Angled Abutment SynOcta AbutmentInOcta Abutment Gold UCLA

1 5。 2 5。N - O c t aO c t a

Free Abutment

N - O c t aO c t a N - O c t aO c t a N - O c t aO c t a

2) InOcta Abutment System


Part 1

TypePlatform Diameter Code No.Impression Coping

DIPIR

DITIRDITIN

Pick-Up

Transfer

Pick-Up

Transfer

Ø4.8

Platform Diameter Code No.DILAØ4.8

Lab Analog

InOcta Abutment System

40

CuffTypePlatform Diameter Code No.DICO10DICO20DICO30DICO40

DICO10NDICO20NDICO30NDICO40N

1mm2mm3mm4mm

1mm2mm3mm4mm

Octa

N-Octa

Ø4.8

InOcta Abutment

O c t a

6m m

Cuff:1, 2, 3, 4m m

N - O c t a

O c t a

N - O c t a

Free Abutment Platform Diameter Code No.DIFAODIFAN

OctaN-Octa

Type

TypePlatform Diameter Code No.DIAA15DIAA25

15。

25。

Ø4.8

Angled Abutment

1 5。

2 5。


Part 1

InOcta Abutment System

Temporary Abutment TypePlatform Diameter Code No.DITA10ODITA20ODITA30ODITA40O

DITA10NDITA20NDITA30NDITA40N

Octa

N-Octa

Cuff1mm2mm3mm4mm

1mm2mm3mm4mm

Ø4.8

O c t a

N - O c t a

Cuff:1, 2, 3m m

Cuff:1, 2, 3m m

Gold UCLA TypePlatform Diameter Code No.DIGUODIGUN

OctaN-Octa

Ø4.8

O c t a N - O c t a

SynOcta Abutment TypePlatform Diameter Code No.DISOADISOAN

OctaN-Octa

Ø4.8

N - O c t a

O c t a

3) Octa Abutment System

42

Impression Coping(Pick-up)

Octa Lab Analog

Healing Abutment

Internal Fixture

Cover Screw

Octa Abutment

Gold Cylinder Plastic Cylinder

N - H e xH e x N - O c t aO c t a

Octa Abutment Driver

1.2 Hex Driver

Impression Coping(Transfer)


Part 1

Platform Diameter Code No.DIOHCØ4.8

Impression Coping

Octa Healing Cap

TypePlatform Diameter Code No.DIOIODIOIN

DIOTIDITIN

Pick-Up

Pick-Up

Transfer

Transfer

Ø4.8

Platform Diameter Code No.DIOAØ4.8

Octa Abutment

Octa Abutment System

44

Platform Diameter Code No.DIOLAØ4.8

Lab Analog

Gold Cylinder TypePlatform Diameter Code No.DIOGCODIOGCN

OctaN-Octa

Ø4.8

O c t a

N - O c t a


Part 1

Octa Abutment System

Plastic Cylinder TypePlatform Diameter Code No.DIOPODIOPN

OctaN-Octa

Ø4.8

N - O c t a

O c t a

46

O-Ring AbutmentO-Ring Abutment Driver

O-Ring Lab Analog

Healing Abutment

Internal Fixture

Cover Screw

O - R i n g O-Ring Retainer

1.2 Hex Driver

4) O-Ring Abutment System


Part 1

Code No.DOLA

Code No.DOR

O-Ring Abutment

O-Ring Retainer

O-Ring Lab Analog

Code No.ORING

O - R i n g

CuffAbutment Diameter Code No.DIORA00DIORA20DIORA40

0mm2mm4mm

Ø3.5

Cuff: 0, 2, 4m m

O-Ring Abutment System

48

“C o n v e n i e n t”No Mount System

During surgery, existing Mount System obstructs the range of vision and

the distance between the upper and lower teeth, however Dentis No-

mount system can immediately ensure a path during surgery and

reduces operation time and attains accurate operation with no effects

from the surrounding teeth.

H e x

Hex Connection prosthesis is compatible with the superstructure with

products of Astra.

Tapered design

Root Form Design achieved superb initial fixation strength also in places

where condition of the bone is not good, makes an easy and stable

surgery possible and reduces surgery time.

Micro-Thread for Bone Loss Prevention

It prevents water absorption of the cortex due to bacterial infection and

minimizes bone loss, breaking due to internal stress and stimulus of the

cortical bone with stable initial fixation strength and wedges in thin cor-

tex as well.

RBM Surface Treatment (1.5-1.8um)

It maximizes osseointegration.

Safe cutting edge

It minimizes resistance of the bone during insertion of the implant and

functions to provide safe and smooth insertion.

Self-tapping Groove

It helps self-tapping during the insertion of the implant and at the same

time be the space for bone chips. In addition, boost fixation strength

after insertion.

×5 , 0 0 0

2. Dentis Submerged Implant System Flow

Submerged Fixture


Part 1

W i d e


L e n g t h C o d e

ø4 . 8

8 . 0 m m

1 0 . 0 m m

1 2 . 0 m m

1 4 . 0 m m

D S F W 4 8 0 8

D S F W 4 8 1 0

D S F W 4 8 1 2

D S F W 4 8 1 4


ø4 . 8

R e g u l a r


L e n g t h C o d e

ø4 . 3

8 . 0 m m

1 0 . 0 m m

1 2 . 0 m m

1 4 . 0 m m

D S F R 4 3 0 8

D S F R 4 3 1 0

D S F R 4 3 1 2

D S F R 4 3 1 4


ø4 . 3

M i n i


L e n g t h C o d e

ø3 . 7

8 . 0 m m

1 0 . 0 m m

1 2 . 0 m m

1 4 . 0 m m

D S F M 3 7 0 8

D S F M 3 7 1 0

D S F M 3 7 1 2

D S F M 3 7 1 4


ø3 . 7

Submerged Implant System Products

ø3.7

0.4㎜

ø3.0

ø3.7

L

ø4.3

0.4㎜

ø3.6

ø4.3

L

ø4.8

0.4㎜

ø4.1

ø4.8

L

50

B r i d g eS i n g l e

Impression Cap

Lab Analog


Submerged Fixture

Cover Screw

Sole Abutment 1.25 Hex Driver

Plastic Coping

Prosthetic Flow Diagrams for Submerged Type Implant

1) Sole Abutment System


Part 1

Cover Screw

2m m

ø4.5, 5.5, 6.5

Cuff: 1.0, 1.5, 2.0,2.5,3.5, 4.5, 5.5m m

Abutment Diameter Code No.DSCSM

Healing Abutment CuffAbutment Diameter Code No.DSH4510DSH4515DSH4520DSH4525DSH4535DSH4545DSH4555

DSH5510DSH5515DSH5520DSH5525DSH5535DSH5545DSH5555

DSH6515DSH6520DSH6525DSH6535DSH6545DSH6555

1.0mm1.5mm2.0mm2.5mm3.5mm4.5mm5.5mm


1.5mm2.0mm2.5mm3.5mm4.5mm5.5mm

Ø4.5

Ø5.5

Ø6.5

Sole Abutment System

52

Sole Abutment

Abutment Diameter Code No.DSIPC45

DSIPC55

DSIPC65

Ø4.5

Ø5.5

Ø6.5

Impression Cap

LengthCuffAbutment Diameter Code No.5.5mm

5.5mm

5.5mm

Cuff: 0.8,1.5,2.0, 2.5, 3.5, 4.5, 5.5mm

5 . 5 m m

DSSA4510DSSA4515DSSA4520DSSA4525DSSA4535DSSA4545DSSA4555

DSSA5510DSSA5515DSSA5520DSSA5525DSSA5535DSSA5545DSSA5555

DSSA6515DSSA6520DSSA6525DSSA6535DSSA6545DSSA6555




Ø4.5

Ø5.5

Ø6.5


Part 1

Lab Analog Abutment Diameter Code No.DSSLA45

DSSLA55

DSSLA65

Ø4.5

Ø5.5

Ø6.5

Plastic Coping TypeAbutment Diameter Code No.DSSP45SDSSP45B

DSSP55SDSSP55B

DSSP65SDSSP65B

SingleBridge

SingleBridge

SingleBridge

Ø4.5

Ø5.5

Ø6.5

S i n g l e

B r i d g e

Sole Abutment System

54

N - H e xH e x H e x N - H e x2 5。1 5。

Healing Abutment

Submerged Fixture

Cover Screw

Couple Abutment

N - H e xH e x

Free Abutment Gold UCLA Abutment

1.25 Hex Driver


Lab Analog

Angled Abutment

H e x N - H e x


H e x N - H e x

2) Couple Abutment System


Part 1

Couple Abutment System

Impression Coping

N-Hex

H e x

N-Hex

H e x

LengthAbutment Diameter Code No.DSIH45LDSIH45S

DSIN45LDSIN45S

DSIH55LDSIH55S

DSIN55LDSIN55S

DSIH65LDSIH65S

DSIN65LDSIN65S

LongShort

LongShort

LongShort

LongShort

LongShort

LongShort

Hex

N-Hex

Hex

N-Hex

Hex

N-Hex

TypePick-Up

Pick-Up

Pick-Up

Pick-Up

Transfer

Ø4.5

Ø5.5

Ø6.5

LengthAbutment Diameter Code No.DSITH45LDSITH45S

DSITN45LDSITN45S

DSITH55LDSITH55S

DSITN55LDSITN55S

DSITH65LDSITH65S

DSITN65LDSITN65S

LongShort

LongShort

LongShort

LongShort

LongShort

LongShort

Hex

N-Hex

Hex

N-Hex

Hex

N-Hex

TypeTransfer

Transfer

Transfer

Ø4.5

Ø5.5

Ø6.5

Impression Coping

Ø4.5

Ø5.5

Healing Abutment(Free Abutment) Abutment Diameter Code No.DSFH4525DSFH4545

DSFH5525DSFH5545

0.8mm

0.8mm

Cuff

2 . 5m m

ø4.5

4 . 5m m

ø4.5

2 . 5m m

ø5.5

4 . 5m m

ø5.5

56

Couple Abutment LengthCuffAbutment Diameter Code No.DSCA4510HDSCA4515HDSCA4520HDSCA4525HDSCA4535HDSCA4545HDSCA4555H

DSCA5510HDSCA5515HDSCA5520HDSCA5525HDSCA5535HDSCA5545HDSCA5555H

DSCA6515HDSCA6520HDSCA6525HDSCA6535HDSCA6545HDSCA6555H

DSCA4510NDSCA4515NDSCA4520NDSCA4525NDSCA4535NDSCA4545NDSCA4555N

DSCA5510NDSCA5515NDSCA5520NDSCA5525NDSCA5535NDSCA5545NDSCA5555N

DSCA6515NDSCA6520NDSCA6525NDSCA6535NDSCA6545NDSCA6555N

5.5mm

5.5mm

5.5mm

5.5mm

5.5mm

5.5mm

TypeHex

N-Hex







Ø4.5

Ø5.5

Ø6.5

Ø4.5

Ø5.5

Ø6.5

Ø4.5Ø5.5

Ø4.5Ø5.5

N - H e x

N - H e x

H e x

H e x

Lab Analog Code No.DSCLA

Free Abutment Abutment Diameter Code No.DSFA45HDSFA55H

DSFA45NDSFA55N

Hex

N-Hex

L

C u f f

Type


Part 1

Couple Abutment

Angled Abutment

Gold UCLA

LengthCuffAbutment Diameter Code No.DSAA45152DSAA45154

DSAA45252DSAA45254

DSAA55152DSAA55154

DSAA55252DSAA55254

DSAA65152DSAA65154

DSAA65252DSAA65254

2mm4mm

2mm4mm

2mm4mm

2mm4mm

2mm4mm

2mm4mm

1 5。

2 5。

1 5。

2 5。

1 5。

2 5。

Ø4.5

Ø5.5

Ø6.5

2 5。

1 5。

TypeAbutment Diameter Code No.DSGCH

DSGCN

Hex

N-Hex

H e x N - H e x

N - H e x

H e x

L

C u f f

LengthCuffAbutment Diameter Code No.DSCA4510H7DSCA4515H7DSCA4520H7DSCA4525H7DSCA4535H7DSCA4545H7DSCA4555H7

DSCA5510H7DSCA5515H7DSCA5520H7DSCA5525H7DSCA5535H7DSCA5545H7DSCA5555H7

DSCA6515H7DSCA6520H7DSCA6525H7DSCA6535H7DSCA6545H7DSCA6555H7

DSCA4510N7DSCA4515N7DSCA4520N7DSCA4525N7DSCA4535N7DSCA4545N7DSCA4555N7

DSCA5510N7DSCA5515N7DSCA5520N7DSCA5525N7DSCA5535N7DSCA5545N7DSCA5555N7

DSCA6515N7DSCA6520N7DSCA6525N7DSCA6535N7DSCA6545N7DSCA6555N7

7mm

7mm

7mm

7mm

7mm

7mm

TypeHex

N-Hex







Ø4.5

Ø5.5

Ø6.5

Ø4.5

Ø5.5

Ø6.5

58


Octa Lab Analog

Healing Abutment

Submerged Fixture

Cover Screw

Sub Octa Abutment

Gold Cylinder Plastic Cylinder

N - H e xH e x N - O c t aO c t a

Octa Abutment Driver

1.25 Hex Driver


3) Sub-Octa Abutment System

DENTIS IMPLANT The cleanest implant in the world

Documents

Transcript of DENTIS IMPLANT The cleanest implant in the world