Dental materials: biological, chemical and physhical properties.
-
Upload
kristina-evans -
Category
Documents
-
view
247 -
download
1
Transcript of Dental materials: biological, chemical and physhical properties.
![Page 1: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/1.jpg)
Dental materials: biological, Dental materials: biological, chemical and physhical chemical and physhical
properties. properties.
![Page 2: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/2.jpg)
PROPERTIES OF THE MATERIALS
Biological Physical –mechanical –thermal –electrical –volumetric
![Page 3: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/3.jpg)
BIOLOGICAL PROPERTIES
Dental materials should be biocompatibile, that means
–non toxic for patient, dentist and staff
–non irritating to oral cavity and tooth tissues
–non allergenic
–non mutagenic or cancerogenic
![Page 4: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/4.jpg)
Figure 1: Sequence of events that may lead to biological side Figure 1: Sequence of events that may lead to biological side effects to dental materials effects to dental materials
Dental Materials Dental Materials
||
Release of Components and Release of Components and Degradation Products Degradation Products
||
Biological Effects? Biological Effects?
||
Disease?Disease?
![Page 5: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/5.jpg)
BIOCOMPATIBILITY
The ability to perform with an appropriate host response in a specific application
Features of biocompatibility •Not only a property of a material, but
also of the location used •Not a single property, but a collection of
attributes •Acknowledges that no material is truly
inert •States that functionis critical
![Page 6: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/6.jpg)
BIOMATERIAL A substance which –is not a drug –can be used for some period of time as
a part of a system used for •treatment •enlargement •replacement of tissue, organ or body
function
![Page 7: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/7.jpg)
Adverse effects of tissues on materials
Material type
Polymer Effect
Depolymerization,Crosslinking, Oxidation, Hydrolysis, Leaching of additives
![Page 8: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/8.jpg)
Adverse effects of tissues on materials
Material type
Metals Effect
Corrosion
Ion-release
![Page 9: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/9.jpg)
Adverse effects of tissues on materials
Material type
Ceramics Effect
Ageing,Dissolution
![Page 10: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/10.jpg)
Adverse effects of materials on tissues
Hypersensitivity •Toxicity •Carcinogenicity1, HYPERSENSITIVITY Adverse reactions caused by exposure to a particular
substance. •May present as: –local effects •egeczema •itchiness and/or •redness of skin –or systemic effects •egasthma •Can be immediate or delayed
![Page 11: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/11.jpg)
Agents causing hypersensitivity
Metals
–Ni, Co, Cr •Latex gloves
–thiocarbamate curing agents •Resin monomers
- HEMA, TEGDMA
![Page 12: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/12.jpg)
TOXICITY May cause death or injury to the cells •Depends on a dose •May be acute or chronic Types of toxicity Acute •Arises soon after administration •Results either in death or in complete recovery
•Chronic •Takes time to develop •Needs prolonged exposure or repeated doses •Results in prolonged ill-health •Most likely type for biomaterials
![Page 13: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/13.jpg)
Target organs
Usually a toxic agent affects a particular organ of the body
•For dental materials it is
–dental pulp
–gingiva
–periodontium and periaplcal bone
![Page 14: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/14.jpg)
CARCINOGENICITY
•Cancer:
Malignant tumors that invade neighboring tissues and which can spread to remote sites of the body.
•Rare to find biomaterials implicated.
![Page 15: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/15.jpg)
Biological interaction of restorative materials
None for amalgam or composite resin fillings;|
•Glass-ionomer cements may promote remineralization.
![Page 16: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/16.jpg)
MECHANICAL PROPERTIES
Restorative materials should
–be strong to be able to withstand biting forces without fracture
–be rigid to maintain their shape under load
![Page 17: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/17.jpg)
STRESS
When an external force is applied on a test specimen an internal force, equal in magnitude but opposite in direction is set up in the body
•STRESS= FORCE/AREA,UNITS= Pascal (Pa)
–Tensile(a)
–Compressive(b)
–Shear(c )
![Page 18: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/18.jpg)
In materials containing –cracks –cuts –fissures –scratches –inclusion bodies –or having irregular dimensions •the concentration of stress and strain
can occur leading to failure
![Page 19: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/19.jpg)
Maximum compressive strength
MATERIAL MPa •zinc –polycarboxylate cements 90 •resins (unfilled) 97 •porcelane 150 •glass-ionomer cements 180 –220 •DENTIN 297 •composites 200–345 •ENAMEL 400 amalgam 310-483
![Page 20: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/20.jpg)
![Page 21: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/21.jpg)
HARDNESS
Resistance to penetration
•It allows to predict the resistans to scratching and wear
![Page 22: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/22.jpg)
![Page 23: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/23.jpg)
Abrasion resistance Wear can occur by one or more
mechanism
-due to abrasive forces
-intermittent stresses
-chemical degradation •The rate of wear of dental materials are
difficult to measure since they are complex and laboratory assessments often give misleading results
![Page 24: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/24.jpg)
FATIGUE Materials when subjected to cyclical or
intermittent loading over a period of time can lead to failure
•Small microcracks may occur caused by stress concentration and the crack is likely to propagate leading to fracture
![Page 25: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/25.jpg)
DIMENSIONAL CHANGES
Can be a result of:
–chemical reaction -during setting
•eg. polymerisation shrinkage
–temperature changes in oral enviroment
•set material and tooth structures
![Page 26: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/26.jpg)
Thermal expansion Is most often different for a material and
for tooth structures
•that leads to formation of microfissure between filling and tooth
•that leads to microleakage
![Page 27: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/27.jpg)
When the coefficient of thermal expansion of a restorative material does not match that of the tooth structure, uneven expansion and contraction occur. In turn, gaps and leakage occur at the interface of the restoration and the tooth.
![Page 28: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/28.jpg)
Thermal conductivity
Describes an amount of conducted thermal energy
•Is different for various materials and tooth structures
–dentine, enamel, cements, composites and ceramics are good thermal insulators
–gold, casts, amalgam and other metals are good thermal conductors
![Page 29: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/29.jpg)
ELECTRICAL PROPERTIES
Galvanic currents Corrosion
![Page 30: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/30.jpg)
GALVANISM IN DENTISTRY
Phenomenon of electric cell and flow of electrons in oral cavity which is perceived by patient as pain or discomfort and metalic taste
•Requires presence of two metals of different electric potential and an electrolyte (saliva)
![Page 31: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/31.jpg)
Example Electric potential of aluminium +1.33V •Electric potential of gold -1.36V •in case of contact of these two metals in
oral cavity the potential difference will be 2.69V and a mild current will be conducted
•patient will complain of discomfort and metalic taste
![Page 32: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/32.jpg)
CORROSION Metals and amalgams in oral cavity can
undergo corrosion - roughening of the surface due to ion exchange
•Corrosion is a result of
–galvanic currents
–chemical interaction with oral fluids and food
![Page 33: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/33.jpg)
SOLUBILITY AND ABSORPTION
Solubility –% of mass of dissolved material –bigest for cements •Absorption –describes absorption of a liquid by a
solid –bigest for resins –for unfilled resins absorption of water is
2%
![Page 34: Dental materials: biological, chemical and physhical properties.](https://reader036.fdocuments.net/reader036/viewer/2022081722/56649dc45503460f94ab7c38/html5/thumbnails/34.jpg)
PROCESS OF MATERIAL SELECTION
Analysis of the problem -Direct filling material: Is the restoration in a high stress bearing
area? Is it visible when smiling? Is it a deep or a shallow cavity? •Based on the analysis identify a set of
requirements and make an informed choice from the available materials