260 Sunrise Highway, Suite #201, Valley Stream, NY 11581T +1-877-291-5677 F +1-646-849-4651 E-mail info@genicore.comwww.genicore.com

Copyright© 2017 GENICORE All rights reserved.

Product Introduction

Product Introduction

GCPI-1710 [Rev.3]

Specifications are subject to change without any notice. Some products listed in this catalog are not available for sales in all markets due to pending regulatory clearance.Please contact the local sales representative for current products availability.

Dental Implant Solution for Every Clinician

Introduction Genicore Partners

Genicore is a specialized products and service provider to dental

professionals in the United States. Genicore strategically partnered

with leading manufacturers in the dental industry to offer tailored and

personalized solutions for every aspect of dental implant treatment.

From treatment planning to final restoration, Genicore is highly

committed to empowering dental professionals with choices that are

simple, predictable and innovative. Genicore is always striving to

deliver the performance qualities, as well as conformance qualities

that dental professionals demand.

Biologic Technology

ComprehensiveEducation and Training

StrategicPartnership

Global Network

TAG Dental

TAG Medical has been manufacturing medical devices for over 20 years for major corporations worldwide. With the experiences gained from the many years of success in medical device industry, TAG has expanded its horizon to dental implants. They are currently manufacturing dental implants of a medical grade quality, ensuring the optimal clinical results.

Aseptico

Aseptico has been a manufacturer and distributor of high quality dental equipment for over 40 years. Its engineering team designs their products to be regulatorily compliant to U.S. and international manufacturing and safety standards, allowing them to export globally. Aseptico is committed to getting the highest quality product at the lowest possible price.

RayScan

Since its establishment in 2004, Ray Scan has been dedicated to developing and manufacturing state-of-the-art imaging solutions for clinicians in both the dental and medical industry. Their advancements and achievements over the past decade have set a new standard of x-ray imaging solutions, placing them as a new prominent global leader in the dental industry.

W&H

W&H products meet all technical standards and are widely acknowledged and respected by users and partners worldwide alike to be reliable, innovative, with state-of-the-art design and excellent price-performance ratio. W&H offers a full range of advanced couplings and powerful dental motors, making them an ideal choice for dental treatments.

Curasan

Curasan focuses in developing and manufacturing unique products and services in the cutting edge field of regenerative medicine. Their extensive product offerings cover the fields of bone and tissue regeneration, tissue engineering and wound healing for both dental and medical applications. They offers optimal quality products for competitive prices.

Dental Implant System

Restorative Flexibility

Dental Implant SystemMicro Thread Reverse Buttress

Cutting Edges Bone Condensing

Body Design

Double Thread Thread Pitch

The Synchronized Micro-Threads serve as a retentive element, decreasing the stress in the crestal zone and increasing the contact area in the cortical bone.

The Reverse Buttress [Macro Thread] is optimal for the distribution of the marginal forces. The transmittance of both axial and radial force allows increased bone formation.

The Double Progressive Macro-Thread of the implant allows easier and quicker implant placement while minimizing trauma to the bone.

The low thread pitch decreases the aggressiveness of the implant and increases the surface envelope for earlier osseointegration. It also reduces the effective stress.

There are two helix cutting blades that extend to the mid-section of the implant. Its self-tapping function of the implant allows smooth penetration with minimal bone destruction.

The gradual widening of the thread thickness compresses the bone to yield enhanced implant fixation and higher stability even in compromised bone conditions.

The geometry of the implant body provides rigid fixation while not applying excessive stress on the bone. It greatly contributes to the increasing of the primary stability.

Reverse CrownThe concaved design of the abutments allows the tissue to heal in the shape that mimics the contour of the natural emergence profile and maximizes the space for tissue volume.

Platform Switching

True One Connection

Surface Treatment

The reduced diameter of the abutment relative to the implant reduces the risk of inflammatory cell infiltration. It greatly contributes to marginal bone preservation and soft tissue attachment.

All of the implants, regardless of diameter (3.3mm to 6.0mm), shares the same one internal hex connection. Both the Axis and the Massif Implant System shares the same connection.

The implant surface is achieved by sandblasting technology (Aluminum oxide particles) followed by acid etching. The surface is modified to be an osteoconductive and hydrophilic surface for optimal cellular adhesion for faster osseointegration.

Overdenture

Cement Retained Screw Retained

Customized

Digital Solution Supported Systems

* Dental Wings, 3shape and Exocad are trademarks or registered trademarks of their respective owners: Dental Wings LLC., 3Shape A/S, Exocad GmbH.

Axis Massif Crestone

Tapered Design for Immediate Implantation and Loading

Cylindrical Design for Maximum Bone-Implant-Contact (BIC)

One-Piece Implant for Single Stage Surgeries

Dental / Ortho ModelPrinting Time 50-60 minutesAccuracy average 50 µm

Mouth GuardPrinting Time 40-50 minutesAccuracy average 50 µm

Surgical GuidePrinting Time Full: 40-50 minutes Half: 25-30 minutesAccuracy average 50 µm

Provisional RestorationPrinting Time 20-25 minutesAccuracy average 40 µm

Alpha PlusAlphaTechnology for Convenience New Definition of Innovation Dental 3D Printing Solution

• Fast and accurate printing experience• Liquid Crystal Planar Solidification• Dental, Ortho Model: Printing time [50-60 minutes] / Accuracy [average 50 µm]• Provisional Restoration: Printing time [20-25 minutes] / Accuracy [average 40 µm]• Surgical Guide: Printing time [Full 40-50 minutes, Half 25-30 minutes] / Accuracy [average 50 µm]

Ultra Low Dosage• Extremely fast scanning time• Pulsed X-ray technology• Multiple scan modes

3 Dedicated Detectors• Reliable performance• Innate error detection system• Long life span

Innovation Design• Adaptive tube cooling time technology• Remote calibration and updates• CBCT & Cephalometric upgrade-ready

Visible X-Ray Guidance• Conveniently adjust the Field of View (FOV) according to your needs.• The adjustment of FOV allows the control of radiation dosage.

Image Processing Technology • UP to 70μm voxel size with focused FOV (4cm diameter).• 6 seconds of reconstruction time for images as large as 16cm diameter.

Extremely Fast CT Scan (Fast Scan Mode)• Ideal for immediate implant placement. • Scan time: 4.9 seconds • Reconstruction time: 4 seconds• Radiation dosage is lower than a conventional panoramic x-ray.

RayScan Technology• Adaptive Moving Focus (AMF)• Metal Artifact Reduction (MAR)• Proprietary Noise Reduction Technology• Proprietary CBCT Reconstruction

Max Torque at the Rotary Instrument 80 Ncm

Voltage 100 – 240VAC, 50/60 Hz

Max Mechanical Output Power Not Applicable

Max Torque at the Motor Not Applicable

Motor Speed Range in the Nominal Voltage Range 300 - 40,000 rpm

Coolant Flow Rate at 100% ~ 100 ml/min

Height / Width / Depth 5.10 x 9.98 x 9.43 in

Max Torque at the Rotary Instrument 50 Ncm

Voltage 100 – 240VAC, 50/60 Hz

Max Mechanical Output Power Not Applicable

Max Torque at the Motor Not Applicable

Motor Speed Range in the Nominal Voltage Range 300 - 40,000 rpm

Coolant Flow Rate at 100% ~ 100 ml/min

Height / Width / Depth 4.8 x 8.6 x 9.2 in

AEU-7000E-70V / AEU-7000L-70V

AEU-6000-70V

Max Torque at the Rotary Instrument 70 Ncm

Voltage 100 – 130v, 50 / 60 Hz

Max Mechanical Output Power 70 W

Max Torque at the Motor 5.5 Ncm

Motor Speed Range in the Nominal Voltage Range 300 – 40,000 rpm

Coolant Flow Rate at 100% at least 90 ml/min

Height / Width / Depth 100 x 235 x 240 mm

Max Torque at the Rotary Instrument 80 Ncm

Voltage 100 – 130v, 50 / 60 Hz

Max Mechanical Output Power 100 W

Max Torque at the Motor 7 Ncm

Motor Speed Range in the Nominal Voltage Range 300 – 40,000 rpm

Coolant Flow Rate at 100% at least 90 ml/min

Height / Width / Depth 109 x 256 x 305 mm

SI-915 Implantmed

SA-310 Elcomed

CERASORB® MPure ß-TCP GraftCERASORB® M is a new generation of pure phase B-TCP. CERASORB® M provides a full range of Micro-Meso-Macro pores for interconnected porosity. The unique β-TCP particles interlock for micro stability, and provide an optimal microenvironment for cellular activity leading to bone remodeling on a physiologic timeline.

Osbone®

Synthetic Hydroxyapatite Bone FillerHydroxyapatite (HA) is the mineral basis for bone - a natural choice for bone regeneration. However, allogeneic, bovine bone and most manufactured HAs are less than optimal product choices. Osbone® Synthetic Hydroxyapatite bone filler provides the answer for those applications that require volume and a highly stable implant bed.

AlloSorb™ & AlloSorb™ DBMA Natural ChoiceAllograft is an excellent choice for dental professional who desire high quality and predictable results in a cost effective and timely manner.

OsteoSelect®Engineered with the Surgeon in Mind

OsteoSelect® DBM Putty is a combination of human Demineralized Bone Matrix (DBM) and a biocompatible and bioresorbable carrier, carboxymethylcellulose, that results in a putty with an excellent handling characteristic. It can be easily molded into any shape and compressed into bony voids.

Allosorb™ DBM is an all allograft demineralized bone matrix, packaged in an open-bore syringe. No added carrier, yet still moldable and irrigation resistant. Presence of BMP is confirmed through validated osteoinductive assays.

OsteoWrap® MEMOGraft Flexibility and Allograft IntergrityOsteoWrap® is a 100% human cortical bone demineralized through a proprietary process making the graft flexible while maintaining allograft material integrity. Easily cut and shaped for various defect sizes, it has a unique malleability that helps in dental membrane placement. Following hydration, it can be folded, rolled, trimmed, and/or sutured, making it an ideal scaffold that acts like a barrier membrane, but will remodel and function like bone in the defect.

EpiGuide®

Bioresorbable Barrier MaterixEpiGuide® is a uniquely structured bioresorbable polyactide (PLA) membrane designed to be used in many applications within Guided Tissue Regeneration (GTR) and Guided Bone Regeneration (GBR) procedures.The patented barrier matrix is characterized by its unique three-dimensional architecture. The innovative structure is easily recognizable in the cross section: the inner layer, featuring large and closed pores, transforms into a chamber-like structure in the intermediate layer and then into the highly porous outer layer, also featuring large pores.

CollaGuide®

Excellent Handling, Flexibility and MalleabilityCollaGuide® is manufactured with no chemical cross-linking, creating an optimal healing environment for both Guided Tissue Regeneration (GTR) and Guided Bone Regeneration (GBR) usage. It is composed of Type 1 Collagen and derived from closed-herd bovine sources.