Dense All Stone SealerProtects dense surfaces & substrates

to protect it

GuardIT® Dense All-Stone Sealer is an environmentally responsible, penetrating, water based, high performance protective sealer. Dense All-Stone provides an invisible coating designed to protect dense surfaces from oil, mould and water stains. Ideally used for the protection of marble, granite, terrazzo and all other dense substrates.

relaeS enotS-llA esneDProduct Information

Deeply penetrates dense substrates

Natural & invisible in appearance

Protects against water & oil stains

Non-hazardous, non-toxic

Water based, no odour, no VOC

Does not alter slip code rating

Easy, simple application

Long lasting protection

1300 722 102

to protect itSuggested Applications • For the protection of dense substrates in indoor and outdoor contexts.• Suitable granite, marble, porcelain, terrazzo, bluestone and other dense masonry surfaces. • Great for use on kitchen/bathroom benchtops.

Sales Notes • DENSE All Stone Sealer is for: granite, marble, porcelain, terrazzo and other dense masonry surfaces; (POROUS All Stone Sealer is for: concrete, concrete pavers, sandstone, terracotta and other porous masonry surfaces) • Completely invisible, natural look. Maintains the natural look, integrity, feel and texture of the stone• Does not alter slip code.• Prevents efflorescence.• GuardIT Solutions® sealing products are water-based, which means they can be applied to a damp substrate. This negates the need to clean and seal on separate days, or to seal only in fine weather. • GuardIT Solutions® sealing products have been independently tested to confirm protection against salt attack, which is particularly relevant to pool areas, and areas with high levels of soil salinity, such as many Buildpro™ serviced areas within close proximity of the Murray River.• Pavers may be dip-sealed with GuardIT Solutions® sealing products, so long as appropriate solvent or epoxy-based adhesives are used in installation.• GuardIT Solutions® sealers are breathable – allowing vapour transfer. • GuardIT Solutions® sealing products provide 97% water protection, and are the best on the market against oil, grease, paint stains.• Protects for 10 years.

Application Notes • Use undiluted• Use on a clean surface – free of dirt and stains.• Apply first coat generously and evenly with broom, brush, roller or garden sprayer.• Allow to dry to touch-dry, then apply second coat.• Buff off excess, unabsorbed material on dense or highly polished surfaces.• Allow to dry for 8 hours. 24 hours initial curing time, 14 days to full cure.

protectingthe planet

HIG

H PERFORMANCE

EC

O F R I E N D LY P R O DU

CT

S

melbournebrick.com.au