DEMISTER II PRE-CONDITIONING - Advanced Micro InstrumentsIncluding the Demister in your installation...
Transcript of DEMISTER II PRE-CONDITIONING - Advanced Micro InstrumentsIncluding the Demister in your installation...
Need to Lower the Temperature of the Sample Gas to Avoid Condensates?
Simple but E�ective PROTECTION
Including the Demister in your installation provides pipeline operators with important advantages:
• First, you can cool a hot gas to ambient temperature as it moves from the Sample Tap towards the Analyzer
• Second, the orientation of the Demister, as it is mounted vertically, allows condensed liquids to fall back to the source, ensuring that no sample gas is wasted
• Last, as opposed to using drop-out pots, coalescing filters or bypass membrane filters, the Demister requires no maintenance or filter replacements
It can be used by itself or in conjunction with the LRP.
DEMISTER II PRE-CONDITIONINGACCESSORY
TECHNICAL SPECIFICATIONS & FEATURES
OPTIONAL CONFIGURATION
PHYSICALDimensions: 3.0” Diameter x 12.0“ Height (7.6 cm x 30 cm)Connections: ½” MPT (1.3 cm) Material: Carbon steel
TECHNOLOGY
POWER
PERFORMANCEMaximum pressure: 1500 psig (103 bar) at 190°F (88°C)
12.0”(30 cm)
Advanced Micro Instruments, Inc225 Paularino AvenueCosta Mesa, CA 92626
DEMISTER only
HIGH PERFORMANCE RELIABILITY INTUITIVE DESIGN
© Advanced Micro Instruments
www.amio2.comTel 714.848.5533 Fax 714.848.454519_0716_02_MK Rev A
LRP with DEMISTER