DELTA ELECTRONICS, INC. Application: Pictures · 2020. 5. 20. · b: total weight 230g (REF.) c:...
21
DELTA ELECTRONICS, INC. 252, Shang Ying Road, Kuei San TAOYUAN SHIEN 333, TAIWAN,R.O.C. TEL: 886-3-3591968 EXT 2073 FAX: 886-3-3591991 DELTA PRODUCTS CORPORATION 4405 CUSHING PARKWAY FREMONT, CA 94538, U.S.A. TEL: 1-510-668-5100 FAX: 1-510-668-0680 DELTA ELECTRONICS EUROPE LTD. 2 YOUNG PLACE KELVIN INDUSTRIAL ESTATE EAST KILBRIDE, GLASGOW G75 OTD, U.K. TEL: 44-1355-588888 FAX: 44-1355-588889 DELTA ELECTRONICS(JAPAN), INC. DELTA SHIBADAIMON BLDG. 2-1-14 SHIBADAIMON, MINATO-KU, TOKYO, 105-0012, JAPAN TEL: 81-3-5733-1111 FAX: 81-3-5733-1211 Date: 27-Apr-07 DELTA ELECTRONICS, INC. Component Specification: 1. Heat Sink Type: Al-Extruded HSK Material: Aluminum A6063-T5 or Equivalent. Dimension: 77*68*49 mm 2. Thermal Interface Material Material: Dow-Corning TC-5121C or Equivalent. 3. Fan (70x70x15 mm with PWM/Thermistor Control) Rated Voltage: 12 V Life Time: Two ball bearing 70000 hrs Connector: a. Lead wire:UL1061 AWG#26 Pin 1: Black Wire--------(-) Pin 2: Red Wire----------(+) Pin 3: Blue Wire---------(F00) Pin 4: Yellow Wire------------(PWM) b. Housing: Molex 47054-1000 or Equivalent c. Terminal: Molex 2759T 08-50-0113 or Equivalent Thermal & Mechanical Spec.: • Thermal performance for 100/95/80W CPU • HSK Assembly Weight: 230 g (ref.) • Clipping Force: 50 lbf (ref.) Model Name: FHS-A7015B62 * Specifications are subject to change without notice Application: • AMD 85W/95W/100W CPU •(Socket AM2/Socket AM2+/Socket AM3+/ Socket FM1/Socket FM2/Socket FM2+) Pictures * All readings are typical values at rated voltage. Performance Curve: 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 3000 3500 4000 4500 5000 5500 6000 6500 Fan Speed ( rpm ) θ c a (℃/W) 29.00 31.00 33.00 35.00 37.00 39.00 41.00 43.00 45.00 47.00 49.00 51.00 N o i se (dBA ) THERMAL RESISTANCE Noise
Transcript of DELTA ELECTRONICS, INC. Application: Pictures · 2020. 5. 20. · b: total weight 230g (REF.) c:...
DELTA ELECTRONICS, INC.252, Shang Ying Road, Kuei SanTAOYUAN SHIEN 333, TAIWAN,R.O.C.TEL: 886-3-3591968 EXT 2073FAX: 886-3-3591991
DELTA PRODUCTS CORPORATION4405 CUSHING PARKWAYFREMONT, CA 94538, U.S.A.TEL: 1-510-668-5100FAX: 1-510-668-0680
DELTA ELECTRONICS EUROPE LTD.2 YOUNG PLACEKELVIN INDUSTRIAL ESTATEEAST KILBRIDE, GLASGOW G75 OTD, U.K.TEL: 44-1355-588888FAX: 44-1355-588889
DELTA ELECTRONICS(JAPAN), INC.DELTA SHIBADAIMON BLDG.2-1-14 SHIBADAIMON, MINATO-KU,TOKYO, 105-0012, JAPANTEL: 81-3-5733-1111FAX: 81-3-5733-1211
Date: 27-Apr-07
DELTA ELECTRONICS, INC.
Component Specification:1. Heat Sink Type: Al-Extruded HSK
Material: Aluminum A6063-T5 or Equivalent.Dimension: 77*68*49 mm
2. Thermal Interface MaterialMaterial: Dow-Corning TC-5121C or Equivalent.
3. Fan (70x70x15 mm with PWM/Thermistor Control)Rated Voltage: 12 VLife Time: Two ball bearing 70000 hrsConnector:a. Lead wire:UL1061 AWG#26
Pin 1: Black Wire--------(-)Pin 2: Red Wire----------(+)Pin 3: Blue Wire---------(F00)Pin 4: Yellow Wire------------(PWM)
b. Housing: Molex 47054-1000 or Equivalentc. Terminal: Molex 2759T 08-50-0113 or Equivalent
Thermal & Mechanical Spec.:• Thermal performance for 100/95/80W CPU• HSK Assembly Weight: 230 g (ref.)• Clipping Force: 50 lbf (ref.)
Model Name: FHS-A7015B62
* Specifications are subject to change without notice
Application:• AMD 85W/95W/100W CPU•(Socket AM2/Socket AM2+/Socket AM3+/Socket FM1/Socket FM2/Socket FM2+)
Pictures
* All readings are typical values at rated voltage.
Performance Curve:
0 . 2 9
0 . 3 0
0 . 3 1
0 . 3 2
0 . 3 3
0 . 3 4
0 . 3 5
0 . 3 6
0 . 3 7
0 . 3 8
0 . 3 9
3 0 0 0 3 5 0 0 4 0 0 0 4 5 0 0 5 0 0 0 5 5 0 0 6 0 0 0 6 5 0 0
Fan Speed ( rpm )
θca
(℃
/W)
2 9 . 0 0
3 1 . 0 0
3 3 . 0 0
3 5 . 0 0
3 7 . 0 0
3 9 . 0 0
4 1 . 0 0
4 3 . 0 0
4 5 . 0 0
4 7 . 0 0
4 9 . 0 0
5 1 . 0 0
Noi
se (dB
A)
THERMAL RESISTANCE
Noise
Delta Electronics Corp.
Form No.︰︰︰︰tMP—D029 Form Rev.︰︰︰︰00
APPROVAL SHEET
Customer Name .: STD
Model Name.: COOLER
Delta Part No.: FHS-A7015B62
Customer Part No.: FHS-A7015B62
Spec Issue Date .: 2015/08/06
Spec Revision : 04
PLEASE SEND ONE COPY OF THIS SPECIFICATION BACK AFTER YOU
SIGNED APPROVAL FOR PRODUCTION PRE-ARRANGMENT.
Approved By:
Date:
Approval Check Designer
Charles Chen Charles Chen Skyler Huang
Delta Electronics Corp.
Form No.︰︰︰︰tMP—D029 Form Rev.︰︰︰︰00
REV. Description Drawn Checked Approved Issue Date
00 ISSUE SPEC 07/09’09 07/09’09 07/09’09
01
1. The HSK is changed height from
30mm to 28mm.
2. The fan is changed from 8M72
to BJ02.
3. Delete PC cover.
12/13’11 12/13’11 12/14’11
02
1. The fan is changed from BJ02
to CF78.
2. Grease type from solid to mesh.
3. Delete box and add PE-bag.
Pin Chen Nick Tan Nick Tan 9/24’13
03
1. Modify the specification on page 5
2. Modify the pallet material on page
11
Skyler Huang Charles Chen Charles Chen 3/12’14
04
1. Change the heatsink P/N to
3347380700
2. Change the metal clip to
3468530500
3. Change the grease to TC-5121C
Skyler Huang Charles Chen Charles Chen 8/06’15
Description:
SAMPLE REVISION CODE LIST
Part No.
REV
DELTA MODEL :
FHS-A7015B62
TOTAL 21 PAGE
04
Delta Electronics Corp.
Form No. tMP—D029 Form Rev. 00
CONTENTSItem Element Description Page Note
1 Specification 5
2 Print 6
3 Packing Plan 10
4 Fan Specification 13
5
6
7
8
9
Delta Electronics Corp.
Form No.︰︰︰︰tMP—D029 Form Rev.︰︰︰︰00
1. SPECIFICATION
Characters
Item Description
Scope THIS SPECIFICATION DEFINES THE ELECTRICAL AND
MECHANICAL CHARACTERISTICS OF THE FAN HEATSINK
Application AMD K8 COOLER
Specification
a: Thermal Resistance 0.31 (℃/W) (REF.)
b: total weight 230g (REF.)
c: clip force 50 lbf (REF.)
BOM
Item Part Name Material Part NO. Q’TY Remark
1 HEATSINK AL6063-T5 3347380700 1 PCE Rev04
2 FAN ASSY PBT + 30%GF 3620750511 1 PCE Rev02
3 METAL CLIP SK7 3468530500 1 PCE Rev04
4 GREASE TC-5121C TBD 1 SET Rev04
5 SCREW S18C 3109141900 4 PCE
6 COOLER LABEL POLYESTER 3267113700 1 PCE
Delta Electronics Corp.
Form No. tMP—D029 Form Rev. 00
2. PRINT Assembly Drawing
Parts Drawing
Delta Electronics Corp.
Form No. tMP—D029 Form Rev. 00
3. PACKING PLAN Packing Specification
Delta Electronics Corp.
Form No. tMP—D029 Form Rev. 00
4. FAN Fan Specification
Doc. No: FMBG-ES Form 001 Rev. 0001 Date: June 24, 2009
Application Notice
1. Delta will not guarantee the performance of the products if the application condition falls outside the parameters set forth in the specification.
2. A written request should be submitted to Delta prior to approval if deviation from this specification is required. 3. Please exercise caution when handling fans. Damage may be caused when pressure is
applied to the impeller, if the fans are handled by the lead wires, or if the fan was hard-dropped to the production floor.
4. Except as pertains to some special designs, there is no guarantee that the products will be free from any such safety problems or failures as caused by the introduction of powder, droplets of water or encroachment of insect into the hub.
5. The above-mentioned conditions are representative of some unique examples and viewed as the first point of reference prior to all other information.
6. It is very important to establish the correct polarity before connecting the fan to the power source. Positive (+) and Negative (-). Damage may be caused to the fans if
connection is with reverse polarity, if there is no foolproof method to protect against such error specifically mentioned in this spec.
7. Delta fans without special protection are not suitable where any corrosive fluids are introduced to their environment. 8. Please ensure all fans are stored according to the storage temperature limits specified.
Do not store fans in a high humidity environment. We highly recommend performance testing is conducted before shipping, if the fans have been stored over 6 months.
9. Not all fans are provided with the Lock Rotor Protection feature. If you impair the rotation of the impeller for the fans that do not have this function, the performance of those fans will lead to failure.
10. Please be cautious when mounting the fan. Incorrect mounting of fans may cause excess resonance, vibration and subsequent noise. 11. It is important to consider safety when testing the fans. A suitable fan guard should be
fitted to the fan to guard against any potential for personal injury. 12. Except where specifically stated, all tests are carried out at room (ambient) temperature
and relative humidity conditions of 25oC, 65% RH. The test value is only for fan performance itself.
13. Be certain to connect an “ 4.7µF or greater” capacitor to the fan externally when the application calls for using multiple fans in parallel, to avoid any unstable power.
