Deliverable D6.5 E-newsletters Public - EE Metal · E-newsletters Public Workpackage WP6 Task...
40
“This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 694638” D6.5 Public Pag. 1 Applying Energy Efficient measures for metal and metalworking SMEs and industry (EE-METAL) GA number 694638 Start Date: 1st March 2016 - Duration: 36 Coordinator: AIN Deliverable D6.5 E-newsletters Public Workpackage WP6 Task 6.2.2. Due date 28/02/2019 Submission date 28/02/2019 Lead beneficiary MR Version 1 Prepared by MR - Nicoleta LECA Review by Steering Board Approved by Steering Board Abstract This deliverable presents the 6 newsletters sent to the stakeholders in the 4 countries (in the 4 languages) and the 4 special number of newsletters entirely dedicated to EE-METAL sent by The National Enterprise Associations.
Transcript of Deliverable D6.5 E-newsletters Public - EE Metal · E-newsletters Public Workpackage WP6 Task...
“This project has received funding from the European Union’s Horizon 2020 research and
innovation programme under grant agreement No 694638”
D6.5 Public Pag. 1
Applying Energy Efficient measures for metal and metalworking SMEs and industry (EE-METAL) GA number 694638 Start Date: 1st March 2016 - Duration: 36 Coordinator: AIN
Deliverable D6.5
E-newsletters Public
Workpackage WP6
Task 6.2.2.
Due date 28/02/2019
Submission date 28/02/2019
Lead beneficiary MR
Version 1
Prepared by MR - Nicoleta LECA
Review by Steering Board
Approved by Steering Board
Abstract This deliverable presents the 6 newsletters sent to the stakeholders
in the 4 countries (in the 4 languages) and the 4 special number of
newsletters entirely dedicated to EE-METAL sent by The National
Enterprise Associations.
D6.5 Public Pag. 2
BUILD STATUS:
Version Date Author Reason Sections
1 25/02/2019 MR Initial Release All
AMENDMENTS IN THIS RELEASE:
Section Title Section Number
Amendment Summary
DISTRIBUTION:
Version Issue Date Issued To
1 25/02/2019 Steering Board
The sole responsibility for the content of this publication lies with the authors. It does not
necessarily reflect the opinion of the European Communities. The European Commission is not
responsible for any use that may be made of the information contained therein.
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
3
All the newsletters sent in Spain: https://www.ee-metal.com/fr/newsletter-spain/
Newsletter Spain: N°1
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
4
Newsletter Spain: N°2
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
5
Newsletter Spain: N°3
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
6
Newsletter Spain: N°4
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
7
Newsletter Spain: N°5
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
8
Newsletter Spain: N°6
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
9
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
10
All the newsletters sent in Italy: https://www.ee-metal.com/fr/newsletter-italy/
Newsletter Italy: N°1
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
11
Newsletter Italy: N°2
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
12
Newsletter Italy: N°3
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
13
Newsletter Italy: N°4
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
14
Newsletter Italy: N°5
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
15
Newsletter Italy: N°6
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
16
All the newsletters sent in Poland: https://www.ee-metal.com/fr/newsletter-poland/
Newsletter Poland: N°1
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
17
Newsletter Poland: N°2
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
18
Newsletter Poland: N°3
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
19
Newsletter Poland: N°4
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
20
Newsletter Poland: N°5
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
21
Newsletter Poland: N°6
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
22
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
23
All the newsletters sent in France: https://www.ee-metal.com/fr/newsletter-france/ Newsletter France: N°1
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
24
Newsletter France: N°2
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
25
Newsletter France: N°3
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
26
Newsletter France: N°4
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
27
Newsletter France: N°5
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
28
Newsletter France: N°6
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
29
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
30
NEWSLETTERS DEDICATED TO EE-METAL PROJECT
SPAIN – July 2017
PROYECTO EUROPEO EE-METAL EN EFICIENCIA ENERGETICA
El Proyecto EE-METAL en las PYMEs de la industria del Metal
EE-METAL es un proyecto europeo cuyo objetivo es aumentar la eficiencia energética y el ahorro
energético en las PYMES industriales del sector Metal y metalúrgico.
El proyecto, que ha sido lanzado en marzo de 2016 y se prevé dure 3 años, tiene el objetivo principal
de proporcionar a las empresas herramientas (tales como de gestión, laborales, tecnológicas,
financieras y de fomación) con el fin de superar las barreras existentes que dificultan la adopción de
medidas de ahorro energético.
Leer más
Auditorías energéticas
En la evolución del proyecto, actualmente se está trabajando en la fase de auditorías energéticas a
nivel europeo, y está en curso de ser finalizada en breve. Se han realizado ya las medidas
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
31
energéticas pertinentes en 20 empresas en 4 países (Francia, Polonia, Italia, España), totalizando 80
auditorías energéticas en total en Europa.
Actualmente se están realizando y finalizando los informes de auditorías, para obtener conclusiones
globales por países y propuestas tecnológicas de ahorro energético. Se espera poder tener a finales
de Septiembre las conclusiones finales y de forma anónima.
Formación en Eficiencia Energética
El pasado 30 de Mayo en Madrid se realizó la formación de formadores en auditorías energéticas,
según la metodología desarrollada en el proyecto EE-METAL. La jornada fue un éxito y contó con la
asistencia de 28 personas de diferentes entidades, institutos de formación, consultoras proveedoras
de servicios de eficiencia energética, universidades, etc… AECIM realizó la organización de la
jornada y AIN (Asociación de la Industria Navarra) la impartición del curso.
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
32
También, el 11 de Mayo se realizó un Webinar sobre ISO 50001, con el objetivo de resolver todas las
dudas para una correcta certificación del ISO 50001, dar a conocer las ventajas de este sistema de
gestión energética y controlar y gestionar la energía para una optimización de la reducción de costes
económicos; finalizando con un caso de éxito. Se contó con la participación de la consultora SinCeO2
Empresas e instituciones
AECIM ha realizado recientemente un acuerdo con AENOR (Asociación Española de Normalización)
para la promoción, difusión y adquisición (a precios más económicos) de toda la normativa de
estandarización en el ámbito de la eficiencia energética, ISO 50001 y otros estándares en relación
con las auditorías energéticas, por parte de las empresas de la industria del metal.
Como consecuencia de ello, se espera aumentará la concienciación, el conocimiento y la
involucración de las PYMEs en todo lo relacionado con la eficiencia energética en sus industrias.
Asociaciones europeas del metal involucradas
Actualmente se está trabajando en la identificación de diversas Asociaciones de empresas del sector
del metal europeas, con el objetivo de poder beneficiarse de las acciones del proyecto EE-METAL, de
tal forma que puedan diseminar información y resultados a sus asociados, participar en jornadas y
seminarios en los diferentes países, para poder concluir en acciones que mejoren la eficiencia
energética de sus industrias. Se espera la conclusión de esta acción en el último trimestre del año.
Agenda
Está previsto realización de un taller/jornada dirigida a las PYMEs del sector del metal, con el
objetivo de informar sobre los beneficios de la implantación y el uso de un sistema de gestión
energética, en conjunto con los requerimientos clave del sistema ISO 50001. Se contará con la
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
33
participación de empresas proveedoras de servicios y sistemas de monitorización energética, y
presentación de algunos casos de éxito. Está previsto la realización de este taller hacia final del año.
www.aecim.org
C/ Principe de Vergara 74 - 28006 - MADRID - Tel: 91 561 03 30 - Fax:91 562 14 73
AECIM - Claúsula de confidencialidad: Este mensaje se dirige exclusivamente al destinatario
consignado. Puede contener información confidencial, de nuestra propiedad o legalmente
protegida. Si usted no es el destinatario, le informamos que cualquier acceso, divulgación, copia o
distribución de la información, así como cualquier acción u omisión realizada con base a la misma,
queda prohibida y puede ser ilegal. En caso de haber recibido este .mensaje por error, le rogamos
que nos lo reenvíe y notifique inmediatamente, borrando toda copia de su sistema. Gracias.
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
34
ITALY – February 2019
NEWSLETTER INFORMATIVA
EVENTI, CORSI E PRODOTTI
EEMETAL Applying Energy Efficient Measures for Metal and Metalworking
SMEs and industry.
il supporto di CSMT all’efficienza energetica delle PMI.
Il progetto EE-METAL ha raggiunto gli obiettivi finali.
Si conclude a fine febbraio EE-METAL, progetto europeo finanziato dal programma
Horizon 2020 guidato da 7 partner di 4 paesi (Spagna, Italia, Polonia e Francia) e
finalizzato ad aumentare l'efficienza energetica delle PMI del settore metallurgico e
metalmeccanico.
CSMT e AIB, partner italiani del progetto, hanno ormai portato a termine le attività
principali previste da EE-Metal:
• sono state effettuate 20 diagnosi energetiche in altrettante PMI del settore della
lavorazione dei metalli operanti nelle Province di Brescia e Mantova
• 2 PMI hanno ricevuto supporto per l’ottenimento della certificazione ISO 50001
• una piccola-media impresa ha beneficiato della fornitura e installazione di un sistema
di monitoraggio dell’energia (SCADA)
• le raccomandazioni e i risultati del progetto sono stati divulgati e messi a disposizione
delle imprese (PMI e non)
• sono state analizzate insieme alle PMI e alle società ESCO le migliori soluzioni per
l’accesso agli strumenti finanziari di supporto all’implementazioni di azioni di
efficientamento energetico delle industrie del settore della lavorazione dei metalli.
Obiettivi e risultati del progetto sono illustrati nella presentazione scaricabile qui
Servizi per l’efficienza energetica, player e soluzioni per l'industria
Focus sull’attività
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
35
Per evidenziare i contratti di finanziamento più adatti al mondo industriale, i 7 partner
del progetto hanno analizzato la panoramica delle Società di Servizi Energetici (ESCO)
nei loro paesi. Hanno inoltre condotto un sondaggio tra 2 categorie di operatori: quelli
strettamente finanziari (in particolare le banche e gli istituti di credito) e quelli che
offrono servizi di finanziamento integrati con i progetti (installatori, fornitori di energia,
società di consulenza, ESCO, ecc.). L'obiettivo è identificare gli ostacoli più frequenti
incontrati dalle PMI nell'accesso a questi meccanismi di finanziamento, nonché
individuare e proporre soluzioni per superare queste difficoltà.
Un evento interamente dedicato a questo argomento è stato organizzato in ciascuno dei
4 paesi partner. In Italia, si è tenuto il 18 luglio e ha riunito circa 40 partecipanti.
L'obiettivo era di avviare un dialogo tra aziende industriali e fornitori di soluzioni
finanziarie per progetti di risparmio energetico.
Grazie a numerose testimonianze, sono state affrontate diverse tematiche:
• Efficienza energetica e competitività dell’industria
• Gli incentivi per l’efficienza energetica
• L’attività delle ESCO e l’utilizzo dei contratti EPC (Energy Performance Contracts)
• Gli strumenti finanziari ed assicurativi a supporto degli investimenti nell’efficienza
energetica
Il workshop si è concluso con una sessione di incontri B2B tra ESCO ed aziende al fine
di creare opportunità di collaborazione.
La relazione “Misure tecniche, contratti di servizi energetici e prodotti finanziari per
aumentare il risparmio energetico nelle PMI del settore dei metalli” sarà presto
disponibile sul sito web EE-METAL.
20 diagnosi energetiche e due aziende certificate ISO 50001 Buone pratiche
Grazie al progetto EE-METAL 20 PMI hanno potuto beneficiare di una diagnosi
energetica e due di queste, situate sul territorio bresciano, hanno inoltre ottenuto di
recente la certificazione ISO 50001.
Rispetto ad altri sistemi di gestione ben più diffusi, come ad esempio la ISO 9001
(sistema di gestione qualità) o la ISO 14001 (sistema di gestione ambientale), la ISO
50001 è uno standard di gestione energetica, finalizzato a un utilizzo più efficiente e
razionale dell’energia all’interno della specifica realtà aziendale.
Le due PMI, che operano nel settore della lavorazione dei metalli, hanno scelto di
intraprendere questo percorso per un approccio sempre volto al miglioramento continuo
delle performance aziendali, anche in termini ambientali ed energetici.
Final Event: ultimo evento del progetto EE-METAL per fare il punto sulle migliori
tecnologie e soluzioni per l’efficienza energetica
Tutti i risultati raggiunti grazie ad EE-METAL sono stati presentati in un importante
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
36
evento finale, che si è svolto il 18 Gennaio 2019 presso la Fonderia di Torbole.
Questo workshop,, organizzato in collaborazione con l’Ordine degli Ingegneri di
Brescia, ha rappresentato un’occasione importante, per alcune delle PMI coinvolte nel
progetto, per testimoniare i benefici ottenuti grazie alle azioni implementate con EE-
Metal. I partecipanti hanno avuto l’opportunità di visitare l’impianto produttivo delle
Fonderie di Torbole e di approfondire come le misure di efficienza energetica adottate
abbiano potuto migliorare le performance energetiche dell’azienda.
Le presentazioni dell’evento sono disponibili qui
Per ulteriori informazioni sul progetto e per accedere al materiale informativo relativo a
casi studio, soluzioni per l’efficienza energetica e tecnologie disponibili vi invitiamo a
visitare il sito www.ee-metal.com e a contattare CSMT.
Via Branze 45, 25123 Brescia Tel. 39 030 6595111 Fax 39 030 6595000
E-mail: [email protected] - [email protected]
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
37
POLAND – December 2018
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
38
France – January 2019
Edition spéciale EFFICACITE ENERGETIQUE Janvier 2019
Améliorer sa performance énergétique et gagner
en compétitivité !
La performance énergétique se révèle
indispensable pour le développement
durable mais aussi pour la compétitivité de
l’industrie. C’est pour accompagner les
entreprises et notamment les PME dans cette
recherche de performance que UIMM LYON-
FRANCE a choisi de piloter le programme
européen EE-METAL pour la France. Un
programme lancé il y a 3 ans qui a d’ores et
déjà permis à 20 PME de réaliser 15%
d’économie en moyenne sur leurs factures
d’énergie.
>> Lire la suite
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
39
Partage d’expériences autour de l’efficacité
énergétique du process de production
20 entreprises ont bénéficié du programme
expérimental européen EE-METAL. Elles ont
toutes avancé en matière d’efficacité
énergétique avec la mise en place d’un plan
d’actions, l’obtention de la certification ISO 50
001 ou encore avec le déploiement d’un
monitoring sur leur process. Partage
d’expériences autour d’une démarche
gagnant-gagnant, pour la rentabilité des
entreprises et pour la préservation de la
planète.
>> Lire la suite
La boîte à outils:
- Adaptation de la norme ISO 50 001
pour les PME de la métallurgie
- Base de données sur les Meilleures
Techniques Disponibles d'éfficacité
énergétique
- Méthode d'audit énergétique pour les
PME de la métallurgie
- Annuaire des offreurs de
solutions technologiques et
d'accompagnement aux économies
d'énergie
- Annuaire des offreurs de solutions de
financement des projets d'économie
d'énergie
Se former à l'efficacité énergétique
“This project has received funding from the European Union’s Horizon 2020 research and
innovation program under grant agreement No 694638”
40
Découvrez la solution de monitoring de l'énergie expérimentée dans
une PME dans le cadre du programme EE-METAL.
1.1.1.1
UIMM LYON - FRANCE
60 Avenue Jean Mermoz - 69008 Lyon 04 78 77 06 00
www.uimmlyon.com
Copyright © 2017 UIMM LYON - FRANCE
Tous droits réservés
Vous pouvez vous désinscrire et ne plus recevoir de newsletter en cliquant ici.
