DELFINO DL DELFINO SUPER - Maschio Deutschland GmbH · 2015. 11. 18. · DELFINO DL DELFINO SUPER...

*) MASCHIO GASPARDO S.p.A.

Cod: F07011019 2015-10 ITENDEFRES

PARTI DI RICAMBIOSPARE PARTS ERSATZTEILE PIECES DÉTACHÉES PIEZAS DE REPUESTO

DELFINO DLDELFINO SUPER*) Valido per Paesi UE*) Valid for EU member countries*) Valable dans les Pays UE*) Gilt für EU-Mitgliedsländer*) Válido para Países UE

2

PARTI DI RICAMBIO

Le ordinazioni delle parti di ricambio vanno fatte presso i nostri concessio-nari di zona e devono essere sempre corredate dalle seguenti indicazioni:

- Tipo, modello e numero di matri-cola dell’attrezzatura. Tali dati sono stampigliati nell’apposita targhetta di cui è dotata ogni attrezzatura.

- Numero di codice della parte richiesta rilevabile dal catalogo ri-cambi.

- Descrizione del particolare e quantità richiesta.

- Numero della tavola.

- Mezzo di trasporto. Nel caso questa voce non sia specifi cata, la Ditta Costruttrice, pur dedicando a questo servizio una particolare cura, non risponde di eventuali ritardi di spedizione dovuti a cause di forza maggiore.Le spese di trasporto si intendono sempre a carico del destinatario. La merce viaggia a rischio e pericolo del committente anche se venduta franco destino.

NOTA: Il termine (Dx) Destro o (Sx) Sinistro della macchina o di parti di essa, è inteso guardando la macchina dalla parte posteriore. Le eccezioni saranno indicate.

SPARE PARTS

Orders must be transmitted through our area dealers and should always include the following indications:

- Type, model and serial number of the machine. These data are punched on the data plate with which every implement is equipped.

- Code number of the required spare part. This will be found in the spare parts catalogue.

- Description of the part and re-quired quantity.

- Table number.

- Means of dispatch. If this item is not indicated, the Manufacturer, while dedicating particular care to this service, shall not be held responsible for delays in delivery caused by cases of force majeure.Transport expenses shall always be at the consignee’s charge. The goods travel at the purchaser’s risk and peril even when sold ex destination.

NOTE: The symbols (Dx) right and (Sx) left, concerning the machine or single parts of it, are referred, as in the fi gure, to a rear view of them. Exceptions will be indicated.

ERSATZTEILE

Die Bestellungen müssen bei unseren Gebietshändrer aufgegeben werden. Bei der Bestellung sind stets die fol-genden Angaben zu machen:

- Typ, Modell und Serien-Nummer des Geräts. Diese Daten stehen auf dem Typenschild, mit dem jedes Gerät versehen ist.

- Artikel Nr. der erforderlichen Er-satzteile. Diese stehen im Ersatzteil-Katalog.

- Beschreibung des Ersatzteils und die erforderliche Stückzahl.

- Tafelnummer.

- Versandmittel. Wenn dieser Punkt nicht spezifi ziert wird, haftet die Herstellerfi rma nicht für etwaigen Lieferverzug aufgrund höherer Ge-walt, auch wenn er diesen Service besonders aufmerksam abwickelt. Die Frachtkosten gehen dagegen immer zu Lasten des Empfängers. Die Ware reist auf Gefahr und Risiko des Auftraggebers, auch wenn frei Haus Verkauft vereinbart worden ist.

N.B.: Die Merkzeichen (Dx) rechts und (Sx) links betreffen eine rückwär-tige Aussicht der Maschine oder Teile von ihr (siehe Bild). Ausnahmen wer-den gezeigt.

PIECES DÈTACHÈES

Les ordres doivent être effectués au-prés de nos concessionaires de zone en précisant les indications suivantes:

- Type, modéle et numéro de série de la machine. Ces données sont gravées sur la plaque d’identifi cation de chaque outil.

- Numéro de code de la piéce détachée indiqué sur le catalogue des piéces détachées.

- Description de la piéce et quan-tité requise.

- Numéro de plan.

- Moyen d’expédition. Si cette rubrique n’est pas indiquée, le Con-structeur, bien que soucieux de ce service, ne répond pas des retards d’expédition pour des causes de force majeure. Les frais de transport sont toujours à la charge du destinataire. La mar-chandise voyage aux risques et périls de l’acheteur même si vendue franco de port.

N.B.: Les références (Dx) droit et (Sx) gauche de la machine ou des parties de la même, est entendue, comme de la fi gure, en regardant la machine de derriere dans le sens de marche.

RESPUESTOS

Los pedidos han de efectuarse en nuestros consesionarios de zona y deben incluir siempre las siguientes indicaciones:

- Tipo, modelo y número de ma-trícula del equipo. Dichos datos están impresos en la relativa placa presente en el equipo.

- Número de código de la parte requerida presente en el catálogo respuestos.

- Descripcíon de la pieza y canti-dad requerida.

- Numero de illustración.

- Medio de transporte. En caso que este ítem no esté especifi cado, el Fabricante, aún prestando la debidas consideraciones para este aspecto, no responde por eventuales retardos de env’o debidos a causas de fuerza mayor.Los gastos de transporte se conside-ran siempre a cargo del destinatario. La mercandería viaja bajo riesgo y peligro del comprador, incluso cuando se vende franco destino.

N.B.: La refencia (Dx) derecha o (Sx) izquierda de la máquina o de sus componentes, se entiende, como en la fi gura, mirando la máquina por la parte trasera. Se indicarán las excepciones.

ITALIANO ENGLISH DEUTSCH FRANÇAIS ESPAÑOL

INDICE INDEX

3

N° Tavola Descrizione Pagina

TAV. 010A Telaio 3° punto DL 1300-1500-1800 ........................................4TAV. 010B Telaio 3° punto DL 2000 - DL SUPER 2300-2500-3000 ..........6TAV. 020 Corpo trasmissione ...................................................................8TAV. 030A Riduttore centrale DL ..............................................................10TAV. 030B Riduttore centrale DL SUPER ...................................................12TAV. 040 Cambio ......................................................................................14TAV. 050A Regolazione meccanica dei rulli ...............................................16TAV. 050B Regolazione idraulica dei rulli ...................................................18TAV. 060 Rompitraccia (optional) ........................................................20TAV. 070 Barra livellatrice (optional) ........................................................22TAV. 080 Protezioni CE ............................................................................24TAV. GB01D Gr. rullo gabbia ..........................................................................26TAV. PK01D Gr. rullo packer ..........................................................................28TAV. SK01D Gr. rullo spiropacker ..................................................................30TAV. SP01D Gr. rullo spuntoni .......................................................................32TAV. RI01D Gr.rullo risaia .............................................................................34TAV. FL01D Gr.rullo fl angiato ........................................................................36TAV. LI01D Gr.rullo liscio ..............................................................................38TAV. RET01D Gr.rullo rete ...............................................................................40CARD.1 Albero card. standard ...............................................................42CARD.2 Albero card. optional .................................................................44CARD.3 Albero card. optional .................................................................46

N° Table Description Page

TAV. 010A Complete 3rd point DL 1300-1500-1800 ..................................4TAV. 010B Complete 3rd point DL 2000 - DL SUPER 2300-2500-3000 .....6TAV. 020 Transmission unit ......................................................................8TAV. 030A Central reduction unit DL ..........................................................10TAV. 030B Central reduction unit DL SUPER .............................................12TAV. 040 Gearbox ....................................................................................14TAV. 050A Rollers mechanical adjustment .................................................16TAV. 050B Rollers hydraulic adjustment .....................................................18TAV. 060 Track eradicator (optional) ........................................................20TAV. 070 Levelling bar (optional) .........................................................22TAV. 080 EC protections ..........................................................................24TAV. GB01D Cage roller unit ..........................................................................26TAV. PK01D Packer roller unit .......................................................................28TAV. SK01D Spiral roller unit .........................................................................30TAV. SP01D Spike roller unit .........................................................................32TAV. RI01D Rice roller unit .........................................................................34TAV. FL01D Light duty packer roller .............................................................36TAV. LI01D Smooth roller unit ......................................................................38TAV. RET01D Green roller unit ........................................................................40CARD.1 Standard cardan shaft ..............................................................42CARD.2 Optional cardan shaft ................................................................44CARD.3 Optional cardan shaft ................................................................46

4 cod. F07021022

TAV.010A

DELFINO 1300 DELFINO 1300 DELFINO 1500DELFINO 1500DELFINO 1800DELFINO 1800

Pos. Cod. Descrizione Description Benennung Description Descripcion

5cod. F07021022

1 M20400598 PROTEZ. LATERALE INFERIORE SX BOTTOM LEFT SIDE PROTECTION PROTECTION INFÉRIEUR GAUCHE UNTERE LINKS SEITENSCHUTZ PROTECCIÓN INFERIOR IZQ.2 M20400401 PROTEZIONE LATERALE MOBILE SX LEFT SIDE PROTECTION PROTECTION LAT. GAUCHE SEITENSCHUTZ LINKS PROTECCION LATERAL IZQUIERDO3 F01060206 VITE M12X1,75X30 U5731* 8.8 ZN BOLT M12X1,75X30 VIS M12X1,75X30 SCHRAUBE M12X1,75X30 TORNILLO M12X1,75X304 F01010135 VITE M16X1,5 X180 5738 8.8 BR BOLT M 16X1,5X170 VIS M 16X1,5X170 SCHRAUBE M 16X1,5X170 TORNILLO M 16X1,5X1706 F01010398 VITE M22X1,5X 70 U5740 8.8 ZN BOLT M22X1,5X 70 U5740 8.8 ZB VIS M22X1,5X 70 U5740 8.8 ZB SCHR.M22X1,5X 70 U5740 8.8 ZB TORN.M22X1,5X 70 U5740 8.8 ZB7 F20100034 PERNO D19 L40 C43 ZN BOLT D=19 L=40 GOUJON D=19 L=40 STIFT D=19 L=40 PERNO D=19 L=408 M20400508 BRACCIO COLLEGAM. RULLO ROLLER CONNECTING ARM BRAS DE CONNECTION ROULEAU WALZE VERBINDUNGSARM BRAZO DE CONEXIÓN RODILLO9 F02200529 SPINA SCATTO D.11 ZN SNAP PIN D.11 FICHE A DETENTE D.11 EINRASTSTIFT D.11 CLAVIJA DE MUELLE D.1110 F01230269 DADO M22X 1,5 D985 6S ZN SELF LOCKING NUT M22X1,5 ECROU AUTOBL. M22X1,5 SELBSTSPERR.MUTTER M22X1,5 DADO AUTOBL. M22X1,511 M20400400 PROTEZIONE LATERALE MOBILE DX RIGHT SIDE PROTECTION PROTECTION LAT.DROITE RECHTE SEITENSCHUTZ PROTECCION LATERAL DERECHO12 M20400597 PROTEZ. LATERALE INFERIORE DX BOTTOM RIGHT SIDE PROTECTION PROTECTION INFÉRIEURE DROITE UNTERE RECHTS SEITENSCHUTZ PROTECCIÓN INFERIOR DER.13 F01220048 DADO M12X1,75 D980 8 ZN NUT M12X1,75 D980 8 ZN ECROU M12X1,75 D980 8 ZN SCHEIBE M12X1,75 D980 8 ZN TUERCA M12X1,75 D980 8 ZN14 M24100569 MOLLA SUPERIORE MARTINETTO SPRING RESSORT FEDER MUELLE15 F01500023 ROS. 17 X45X6 D6340 C50 ZD ELASTIC DISK DISQUE ELASTIQUE ELASTISCHE SCHEIBE DISCO ELASTICO16 F01220070 DADO M16X 1,5 D980 8 ZN NUT M16X 1,5 D980 8 ZB ECRO.M16X 1,5 D980 8 ZB MUTT.M16X 1,5 D980 8 ZB TUER.M16X 1,5 D980 8 ZB17 F20110730 CAV.Q.M10X 1,5X 30 91X 99 ZN STRIKER M10X 1,5X 30 91X 99 ZB BUTEE M10X 1,5X 30 91X 99 ZB ANSCHLAG M10X 1,5X 30 91X 99 EL. DE EMPALME M10X 1,5X 3018 F01010317 VITE M14X1,5X 35 U5740 8.8 ZN BOLT M14X1,5X35 U5740 8.8 ZN VIS M 14X1,5X35 SCHRAUBE M 14X1,5X35 TORNILLO M 14X1,5X3519 F01220034 DADO M10X1,25 D980 8 ZN NUT M10X1,25 D980 8 ZB ECRO.M10X1,25 D980 8 ZB MUTT.M10X1,25 D980 8 ZB TUER.M10X1,25 D980 8 ZB20 F01010250 VITE M10X1,25X30 U5740 8.8 ZN BOLT M10X1,25X30 U5740 8.8 ZB VIS M10X1,25X30 U5740 8.8 ZB SCHR.M10X1,25X30 U5740 8.8 ZB TORN.M10X1,25X30 U5740 8.8 ZB21 M20400418 BASE 3° PUNTO SX LEFT BASE LINKAGE BASE ATTELAGE GAUCHE BASISVERB. LINKS BASE ATAQUE IZQUIERD22 M20400569 CASTELLO 3° PUNTO L.550 COMPLETE 3RD POINT L.550 3EME POINT COMPL. L.550 3. PUNKT KOMPLETT L.550 TERCER PUNTO COMPL. L.55023 F20100033 PERNO D19 L137 C43 ZN BOLT D=19 L=137 GOUJON D=19 L=137 STIFT D=19 L=137 PERNO D=19 L=13724 F20120400 GANCIO SOSTEGNO CARDANO SHAFT HOOK SUPPORT SUPPORT CARDAN GELENKWELLE - HACKEN SOPORTE CARDAN25 M58100930 CATENELLA L=476 ASSEMBLY CHAIN DMP L=476 CHAINE L=476 KETTE L=476 CADENA L=47626 M20400417 BASE 3° PUNTO DX RIGHT BASE LINKAGE BASE ATTELAGE DROIT BASISVERB. RECHTS BASE ATAQUE DERECHO27 F01220033 DADO M10X 1,5 D980 8 ZN NUT M10X 1,5 D980 8 ZN ECROU M10X 1,5 D980 8 ZN MUTTER M10X 1,5 D980 8 ZN TUERCA M10X 1,5 D980 8 ZN28 F20100049 PERNO D22 L86 C43 ZN BOLT D22 L86 C43 ZN GOUJON D.22 BOLZEN D.22 PERNO D.2229 F01010362 VITE M18X1,5 X45 U5740 8.8 ZN BOLT M 18X1,5X45 VIS M 18X1,5X45 SCHRAUBE M 18X1,5X45 TORNILLO M 18X1,5X4530 M20400422 STAFFA ATTACCO BARRA STIRRUP ETRIER BUEGEL ESTRIBO31 F01410064 ROS.M10 10,5X 20X 2 U6592 ZN WASHER M10 10,5X20X2 U6592 ZN RONDELL.M10 10,5X20X2 U6592 ZN SCHEIBE M10 10,5X20X2 U6592 ZN ARAND. M10 10,5X20X2 U6592 ZN32 M20400423 CONTROSTAFFA ATTACCO BARRA BAR ATTACH COUNTER STIRRUP CONTRE ETRIER ATTELAGE BARRE BUEGEL UNTERLENKERANSCHLUESSE CONTRE ESTRIBO ENGANCHE BARRE33 F01220081 DADO M18X 1,5 D980 8 ZN SELF LOCKING NUT M18X1,5 980V ECROU AUTOBL. M18X1,5 980-V SELBSTSP.MUTT. M18X1,5 980-V DADO AUTOBL. M18X1,5 980-V34 F01220059 DADO M14X 1,5 D980 8 ZN NUT M14X 1,5 D980 8 ZB ECROU M14X 1,5 D980 8 ZB MUTTER M14X 1,5 D980 8 ZB TUERCA M14X 1,5 D980 8 ZB35 F20100133 PERNO D25 L122 C43 ZN PIN D25 L122 C43 ZN BOULON D25 L122 C43 ZN BOLZEN D25 L122 C43 ZN PERNO D25 L122 C43 ZN36 F20100074 PERNO D28 L109 C43 SPINA 3°P. PIN FOR BAR LINKAGE GOUJON ATTELAGE BARRE VERB.BOLZEN SCHUTZHOLM PERNO ATAQUE BARRA

TAV.010ATELAIO 3° PUNTO DL 1300-1500-1800 / COMPLETE 3RD POINT DL 1300-1500-1800

6 cod. F07021022

TAV.010B

DELFINO 2000 DELFINO 2000 DELFINO SUPER 2300 DELFINO SUPER 2300 DELFINO SUPER 2500 DELFINO SUPER 2500 DELFINO SUPER 3000 DELFINO SUPER 3000


7cod. F07021022

1 M20400598 PROTEZ. LATERALE INFERIORE SX BOTTOM LEFT SIDE PROTECTION PROTECTION INFÉRIEUR GAUCHE UNTERE LINKS SEITENSCHUTZ PROTECCIÓN INFERIOR IZQ.2 M20400401 PROTEZIONE LATERALE MOBILE SX LEFT SIDE PROTECTION PROTECTION LAT. GAUCHE SEITENSCHUTZ LINKS PROTECCION LATERAL IZQUIERDO3 F01060206 VITE M12X1,75X30 U5731* 8.8 ZN BOLT M12X1,75X30 VIS M12X1,75X30 SCHRAUBE M12X1,75X30 TORNILLO M12X1,75X304 F01010135 VITE M16X1,5 X180 5738 8.8 BR BOLT M 16X1,5X170 VIS M 16X1,5X170 SCHRAUBE M 16X1,5X170 TORNILLO M 16X1,5X1706 F01010398 VITE M22X1,5X 70 U5740 8.8 ZN BOLT M22X1,5X 70 U5740 8.8 ZB VIS M22X1,5X 70 U5740 8.8 ZB SCHR.M22X1,5X 70 U5740 8.8 ZB TORN.M22X1,5X 70 U5740 8.8 ZB7 F20100034 PERNO D19 L40 C43 ZN BOLT D=19 L=40 GOUJON D=19 L=40 STIFT D=19 L=40 PERNO D=19 L=408 M20400508 BRACCIO COLLEGAM. RULLO ROLLER CONNECTING ARM BRAS DE CONNECTION ROULEAU WALZE VERBINDUNGSARM BRAZO DE CONEXIÓN RODILLO9 F02200529 SPINA SCATTO D.11 ZN SNAP PIN D.11 FICHE A DETENTE D.11 EINRASTSTIFT D.11 CLAVIJA DE MUELLE D.1110 F01230269 DADO M22X 1,5 D985 6S ZN SELF LOCKING NUT M22X1,5 ECROU AUTOBL. M22X1,5 SELBSTSPERR.MUTTER M22X1,5 DADO AUTOBL. M22X1,511 M20400400 PROTEZIONE LATERALE MOBILE DX RIGHT SIDE PROTECTION PROTECTION LAT.DROITE RECHTE SEITENSCHUTZ PROTECCION LATERAL DERECHO12 M20400597 PROTEZ. LATERALE INFERIORE DX BOTTOM RIGHT SIDE PROTECTION PROTECTION INFÉRIEURE DROITE UNTERE RECHTS SEITENSCHUTZ PROTECCIÓN INFERIOR DER.13 F01220048 DADO M12X1,75 D980 8 ZN NUT M12X1,75 D980 8 ZN ECROU M12X1,75 D980 8 ZN SCHEIBE M12X1,75 D980 8 ZN TUERCA M12X1,75 D980 8 ZN14 M24100569 MOLLA SUPERIORE MARTINETTO SPRING RESSORT FEDER MUELLE15 F01500023 ROS. 17 X45X6 D6340 C50 ZD ELASTIC DISK DISQUE ELASTIQUE ELASTISCHE SCHEIBE DISCO ELASTICO16 F01220070 DADO M16X 1,5 D980 8 ZN NUT M16X 1,5 D980 8 ZB ECRO.M16X 1,5 D980 8 ZB MUTT.M16X 1,5 D980 8 ZB TUER.M16X 1,5 D980 8 ZB17 F01010128 VITE M16X1,5X130 U5738 8.8 ZN BOLT M 16X1,5X130 VIS M 16X1,5X130 SCHRAUBE M 16X1,5X130 TORNILLO M 16X1,5X13018 M36200241 STAFFA PER TUBO DA 80 STIRRUP ETRIER BUEGEL ESTRIBO19 F01010317 VITE M14X1,5X 35 U5740 8.8 ZN BOLT M14X1,5X35 U5740 8.8 ZN VIS M 14X1,5X35 SCHRAUBE M 14X1,5X35 TORNILLO M 14X1,5X3520 F01220034 DADO M10X1,25 D980 8 ZN NUT M10X1,25 D980 8 ZB ECRO.M10X1,25 D980 8 ZB MUTT.M10X1,25 D980 8 ZB TUER.M10X1,25 D980 8 ZB21 F01010250 VITE M10X1,25X30 U5740 8.8 ZN BOLT M10X1,25X30 U5740 8.8 ZB VIS M10X1,25X30 U5740 8.8 ZB SCHR.M10X1,25X30 U5740 8.8 ZB TORN.M10X1,25X30 U5740 8.8 ZB22 M20400533 BASE 3° PUNTO SX LEFT BASE LINKAGE BASE ATTELAGE GAUCHE BASISVERB. LINKS BASE ATAQUE IZQUIERD23 M20400567 CASTELLO 3° PUNTO L.760 COMPLETE 3RD POINT 3EME POINT COMPL. 3. PUNKT KOMPLETT TERCER PUNTO COMPL.24 F20100133 PERNO D25 L122 C43 ZN PIN D25 L122 C43 ZN BOULON D25 L122 C43 ZN BOLZEN D25 L122 C43 ZN PERNO D25 L122 C43 ZN25 M58100930 CATENELLA L=476 ASSEMBLY CHAIN DMP L=476 CHAINE L=476 KETTE L=476 CADENA L=47626 M20400532 BASE 3° PUNTO DX RIGHT BASE LINKAGE BASE ATTELAGE DROIT BASISVERB. RECHTS BASE ATAQUE DERECHO27 F20100074 PERNO D28 L109 C43 SPINA 3°P. PIN FOR BAR LINKAGE GOUJON ATTELAGE BARRE VERB.BOLZEN SCHUTZHOLM PERNO ATAQUE BARRA28 F01010362 VITE M18X1,5 X45 U5740 8.8 ZN BOLT M 18X1,5X45 VIS M 18X1,5X45 SCHRAUBE M 18X1,5X45 TORNILLO M 18X1,5X4529 M20400422 STAFFA ATTACCO BARRA STIRRUP ETRIER BUEGEL ESTRIBO30 F01410168 ROS.M30 31X 56X 4 U6592 ZN WASHER M30 31X56X4 U6592 ZN RONDELLA M30 31X56X4 U6592 ZN SCHRAUBE M30 31X56X4 U6592 ZN ARANDELLA M30 31X56X4 U6592 ZN31 M20400423 CONTROSTAFFA ATTACCO BARRA BAR ATTACH COUNTER STIRRUP CONTRE ETRIER ATTELAGE BARRE BUEGEL UNTERLENKERANSCHLUESSE CONTRE ESTRIBO ENGANCHE BARRE32 F01220081 DADO M18X 1,5 D980 8 ZN SELF LOCKING NUT M18X1,5 980V ECROU AUTOBL. M18X1,5 980-V SELBSTSP.MUTT. M18X1,5 980-V DADO AUTOBL. M18X1,5 980-V33 F01220059 DADO M14X 1,5 D980 8 ZN NUT M14X 1,5 D980 8 ZB ECROU M14X 1,5 D980 8 ZB MUTTER M14X 1,5 D980 8 ZB TUERCA M14X 1,5 D980 8 ZB34 F20120400 GANCIO SOSTEGNO CARDANO SHAFT HOOK SUPPORT SUPPORT CARDAN GELENKWELLE - HACKEN SOPORTE CARDAN

TAV.010BTELAIO 3° PUNTO DL 2000 - DL SUPER 2300-2500-3000 / COMPLETE 3RD POINT DL 2000 - DL SUPER 2300-2500-3000

8 cod. F07021022

TAV.020


9cod. F07021022

TAV.020

1 M27100210 COLTELLO DC/DS/DL DX 90X12 RIGHT BLADE DC/DS/DL 90X12 COUTEAU DROIT DC/DS/DL 90X12 RECHT MESSER DC/DS/DL 90X12 CUCHILLO DERECH.DC/DS/DL 90X122 F20110044 VITE M16X1,5 X 50 SPEC 12.9 ZD BOLT M 16X1,5X50 VIS M16X1,5X50 SPEC 12.9 ZD SCHRAUBE M 16X1,5X50 TORNILLO M 16X1,5X503 M38100301 SUPPORTO COLTELLI LATERALE SIDE BLADE SUPPORT SUPPORT COUTEAU LATERAL SEITENMESSERHALTERUNG SOPORTE CUCHILLO LATERAL4 M38100218 FERMO VITE COLTELLI DC-DL-DS KNIVES FASTENING BOLT ETRIER SERRAGE COUTEAU DC-DS MESSERSCHRAUBESPERRUNG CLAUSURATORNILLOCUCHILLA5 F01010289 VITE M12X1,25X35 U5740 10.9 DL BOLT M12X1,25X35 U5740 10.9 VIS M 12X1,25X35 SCHRAUBE M 12X1,25X35 TORNILLO M 12X1,25X356 F01480123 ROS.G 12,5X22,9X 4 EX.C70 ZN WASHER M12 ZGP EXTRA P. RONDELLE M12 ZGP EXTRA P. UNTERLEGSCHEIBE M12 ZGP EXTRA ARANDELA M12 ZGP EXTRA P.7 M26400306 FLANGIA SUPP.INFERIORE DC FLANGE BOTTOM SUPPORT DC SUPPORT INFERIEUR DC FLANSCH BRIDA SOPORTE INFERIOR DC8 M38100214 ANELLO COMBI 65X85X13/17 OIL SEAL 65X85X13/17 SPEC. PARE-HUILE 65X85X13/17 SPEC OELABDICHTUNG 65X85X13/17SPEC. PARA-ACEITE 65X85X13/17 SPEC.9 F04010188 CUSC.D50 D90 B20 6210 C3 BEARING D50 D90 B20 6210 C3 ROULEMENT D50 D90 B20 6210 C3 LAGER D50 D90 B20 6210 C3 COJINETE D50 D90 B20 6210 C310 F02050447 ANELLO E. DI 90X 3 U7437 C70 SEEGER RING DI 90X3 U7437 C70 BAGUE SEEGER DI 90X3 U7437 C70 SEEGERRING DI 90X 3 U7437 C70 ANILLO SEEGER DI 90X3 U743711 F03010726 ANELLO OR 123.43X3.53 NBR GASKET OR 123.43X3.53 NBR BAGUE OR D. 123.43X3.53 RING OR 123.43X3.53 NBR ANILLO OR 123.43X3.53 NBR12 F01220034 DADO M10X1,25 D980 8 ZN NUT M10X1,25 D980 8 ZB ECRO.M10X1,25 D980 8 ZB MUTT.M10X1,25 D980 8 ZB TUER.M10X1,25 D980 8 ZB13 F03150631 TAPPO CON MAGNETE M18X1,5 COVER COUVERCLE DECKEL TAPA14 M20413500 COMP. CORPO TRASMISSIONE 1300 TRANSMISSION BOX 1300 BOITE DE TRANSMISSION 1300 ANTRIEBSKASTEN 1300 CUERPO TRASMISION 130015 M20415500 COMP. CORPO TRASMISSIONE 1500 TRANSMISSION BOX 1500 BOITE DE TRANSMISSION 1500 ANTRIEBSKASTEN 1500 CUERPO TRASMISION 150016 M20418500 COMP. CORPO TRASMISSIONE 1800 TRANSMISSION BOX 1800 BOITE DE TRANSMISSION 1800 ANTRIEBSKASTEN 1800 CUERPO TRASMISION 180017 M20420500 COMP. CORPO TRASMISSIONE 2000 TRANSMISSION BOX 2000 BOITE DE TRANSMISSION 2000 ANTRIEBSKASTEN 2000 CUERPO TRASMISION 200018 M20423500 COMP. CORPO TRASMISSIONE 2300 TRANSMISSION BOX 2300 BOITE DE TRANSMISSION 2300 ANTRIEBSKASTEN 2300 CUERPO TRASMISION 230019 M20425500 COMP. CORPO TRASMISSIONE 2500 TRANSMISSION BOX 2500 BOITE DE TRANSMISSION 2500 ANTRIEBSKASTEN 2500 CUERPO TRASMISION 250020 M20430500 COMP. CORPO TRASMISSIONE 3000 TRANSMISSION BOX 3000 BOITE DE TRANSMISSION 3000 ANTRIEBSKASTEN 3000 CUERPO TRASMISION 300021 M27100306 DISTANZIALE 50,9X63,5X20,5 SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR22 M27100309 GUARNIZIONE FLEXOID 5/10 GASKET MM.0,5 JOINT MM.0,5 DICHTUNG MM.0,5 JUNTA MM.0,523 M19400308 FLANGIA INTERNA INNER FLANGE FLASQUE INTERIEUR INNENFLANSCH BRIDA INTERNA24 M27100305 INGRANAGGIO GEAR ENGRENAGE ZAHNRAD ENGRANAGE25 F02010144 GHIERA AU.GUP M45X1,5 T.4H ZN SELF LOCKING NUT M45X1,5 T.4H COLLIER AUTOBL. M45X1,5 T.4H SELBSTSP. M45X1,5 T.4H ZN VIROLA AUTOBL. M45X1,5 T.4H26 M26413700 COPERCHIO CORPO TRAS. MOD.1300 UPPER PLATE 1300 CAPOT SUPERIEUR 1300 OBERBLECH 1300 PLANCHA SUPERIOR 130027 M26415700 COPERCHIO CORPO TRAS. MOD.1500 UPPER PLATE 1500 CAPOT SUPERIEUR 1500 OBERBLECH 1500 PLANCHA SUPERIOR 150028 M26418700 COPERCHIO CORPO TRAS. MOD.1800 UPPER PLATE 1800 CAPOT SUPERIEUR 1800 OBERBLECH 1800 PLANCHA SUPERIOR 180029 M26420700 COPERCHIO CORPO TRAS. MOD.2000 UPPER PLATE 2000 CAPOT SUPERIEUR 2000 OBERBLECH 2000 PLANCHA SUPERIOR 200030 M26423700 COPERCHIO CORPO TRAS. MOD.2300 UPPER PLATE 2300 CAPOT SUPERIEUR 2300 OBERBLECH 2300 PLANCHA SUPERIOR 230031 M26425700 COPERCHIO CORPO TRAS. MOD.2500 UPPER PLATE 2500 CAPOT SUPERIEUR 2500 OBERBLECH 2500 PLANCHA SUPERIOR 250032 M26430700 COPERCHIO CORPO TRAS. MOD.3000 UPPER PLATE 3000 CAPOT SUPERIEUR 3000 OBERBLECH 3000 PLANCHA SUPERIOR 300033 F04010179 CUSC.D35 D72 B17 6207 2RSC3 BEARING D35 D72 B17 6207 2RSC3 ROULEMENT D35 D72 B17 6207 LAGER D35 D72 B17 6207 2RSC COJINETE D35 D72 B17 620734 F03010684 ANELLO OR 94,84X3,53 NGR GASKET OR 94,84X3,53 NBR BAGUE OR 94.83X3.53 NBR RING OR 94,84X3,53 NBR ANILLO OR 94,84X3,53 NBR35 M38100344 SUPPORTO CUSCINETTO SUPERIORE BEARING SUPPORT SUPPORT ROULEMENT LAGERHALTER SOPORTE36 F01480112 ROSET.GROWER M10 ZN EXTRA P. GROWER WASHER D.10 RONDELLE GROWER D.10 SCHEIBE GROWER D.10 ARANDELA GROWER D.1037 F20110012 VITE M10X1,25X 35 5738 10.9 PL BOLT M 10X1,25X35 VIS M 10X1,25X35 SCHRAUBE M 10X1,25X35 TORNILLO M 10X1,25X3538 F03010503 ANEL. OR 34,52X3,53 NBR GASKET OR 34,52X3,53 NBR BAGUE OR 34,52X3,53 NBR RING OR 34,52X3,53 NBR ANILLO OR 34,52X3,53 NBR39 M52400519 TAPPO COVER COUVERCLE DECKEL TAPA40 M52400513 PROLUNGA TAPPO CARICO OLIO ZN FRAME EXTENSION EXTENSION VERLÄNGERUNG PROLONGA41 M52400514 TAPPO CON ASTINA PLUG BOUCHON FERMETURE VERSCHLUSSPFROPFEN TAPON CLAUSURA42 F01010254 VITE M10X1,25X35 U5740 8.8 ZN BOLT M 10X1,25X35 VIS M 10X1,25X35 SCHRAUBE M 10X1,25X35 TORNILLO M 10X1,25X3543 M20400112 ASSIEME RIDUTTORE DELFINO COMPLETE GEAR BOX BOITE DE VITESSE COMPL. WECHSELGETRIEBGE KOMPL. CAJA CAMBIO COMPL.44 M20400123 RIDUTTORE DI VEL.TÀ DS RPM 352 GEARBOX W/BEVEL GEAR PAIR BOITE DE VITESSE COMPL. WECHSELGETRIEBGE KOMPL. CAJA CAMBIO COMPL.45 M20400111 ASSIEME CAMBIO DELFINO COMPLETE GEAR BOX DELFINO BOITE DE VIT. COMPL. DELFINO WECHSELGETRIEBGE KOMPL. CAJA CAMBIO COMPL. DELFINO46 F01410064 ROS.M10 10,5X 20X 2 U6592 ZN WASHER M10 10,5X20X2 U6592 ZN RONDELL.M10 10,5X20X2 U6592 ZN SCHEIBE M10 10,5X20X2 U6592 ZN ARAND. M10 10,5X20X2 U6592 ZN47 F01010244 VITE M10X1,25X25 U5740 8.8 ZN BOLT M10X1,25X25 U5740 8.8 ZN VIS M 10X1,25X25 SCHRAUBE M 10X1,25X25 TORNILLO M 10X1,25X2548 F03011158 GUARNIZIONE IN SILICONE D=6 GASKET D=6 JOINT D=6 DICHTUNG D=6 JUNTA D=649 F02050204 ANELLO E. DE 55X 3 U7436 C70 SEEGER RING D.55 BAGUE SEEGER D.55 SEEGERRING D.55 ANILLO D.5550 M36500311 ROSETTA D=65 D=55 L=0,1 WASHER D=65 D=55 L=0,1 ROSETTE D=65 D=55 L=0,1 SCHEIBE D=65 D=55 L=0,1 ARANDELLA D=65 D=55 L=0,151 M36500312 ROSETTA D=65 D=55 L=0.05 WASHER D=65 D=55 L=0.05 ROSETTE D=65 D=55 L=0.05 SCHEIBE D=65 D=55 L=0.05 ARANDELLA D=65 D=55 L=0.0552 M36100306 INGRANAGGIO LATERALE DM GEAR ENGRENAGE LATERAL DM ZAHNRAD ENGRANAJE53 M36500313 DISTANZ. D=67 D=55 L=16.5 SPACER D=67 D=55 L=16.5 ENTRETOISE D=67 D=55 L=16.5 DISTANZSTUECK D=67 D=55 L=16.5 DISTANCIADOR D=67 D=55 L=16.554 F02050471 ANELLO E. DI100X 3 U7437 C70 SEEGER RING D.100 BAGUE SEEGER D.100 SEEGERRING D.100 ANILLO SEEGER D.10055 F04010192 CUSC.D55 D100 B21 6211 53 KN BEARING D55 D100 B21 6211 53KN ROULEMENT 6211 AG15 LAGER 6211 AG15 COJINETE 6211 AG1556 M19400307 FLANGIA SUPP.INFERIORE DM BEARING LOWER SUPPORT SUPPORT INFERIEUR UNTERER HALTER SOPORTE INFERIOR57 M26400309 SUPPORTO COLTELLI CENTRALE CENTR. BLADE SUPPORT SUPPORT COUTEAU CENTRAL DMR ZENTRALMESSERHALTERUNG SOPORTE CUCHILLO CENTR.58 M27100209 COLTELLO DC/DS/DL SX 90X12 LEFT BLADE DC/DS/DL 90X12 COUTEAU GAUCHE DC/DS/DL 90X12 LINKES MESSER DC/DS/DL 90X12 CUCHILLO IZQ. DC/DS/DL 90X1259 F01220034 DADO M10X1,25 D980 8 ZN NUT M10X1,25 D980 8 ZB ECRO.M10X1,25 D980 8 ZB MUTT.M10X1,25 D980 8 ZB TUER.M10X1,25 D980 8 ZB60 M20400412 CUNEO STONE DEFLECTOR COIN DE RENFORCEMENT VERSTAERKUNGSKEIL CUÑA DE REFUERZO61 M38100226 COLTELLO DC DX SP.12 TUNG RIGHT TUNGSTEN BLADE COUTEAU DC-BR 12MM DRT TUNGSTE RECHTS MESSER 12MM TUNGS. CUCHILLA DER 12MM.TUNGST.62 M38100227 COLTELLO DC SX SP.12 TUNG LEFT TUNGSTEN BLADE COUTEAU DC-BR 12MM GCH TUNGSTE LINKES MESSER 12MM TUNGST CUCHILLA IZ. 12MM TUNGST.

CORPO TRASMISSIONE / TRANSMISSION UNIT

10 cod. F07021022

TAV.030A

DELFINO 1300 DELFINO 1300 1500 1500 1800 1800 2000 2000


11cod. F07021022

TAV.030A

1 F03010739 ANELLO QOR DI 126,37X5,33 NBR GASKET QOR DI 126,37X5,33 NBR BAGUE QOR DI 126,37X5,33 NBR RING QOR DI 126,37X5,33 NBR ANILLO QOR DI 126,37X5,33 NBR2 F03010245 ANELLO T.A. 80X100X10 D3760NBR OIL SEAL 80X100X13/13 PARE-HUILE 80X100X10/13 OELABDICHTUNG 80X100X10/1 JUNTA DE AC. 80X100X10/133 F04050083 CUSC.D55 D90 T23 32011 BEARING D55 D90 T23 32011 ROULEMENT D55 D90 T23 32011 LAGER D55 D90 T23 32011 COJINETE D55 D90 T23 32014 M20400120 ALBERO TRASM. D=80 L=185 TRANSMISSION SHAFT D=80 L=185 ARBRE DE TRANSMIS.D=80 L=185 ANTRIEBSWELLE D=80 L=185 EJE DE TRASMISION D=80 L=1855 F01010250 VITE M10X1,25X30 U5740 8.8 ZN BOLT M10X1,25X30 U5740 8.8 ZB VIS M10X1,25X30 U5740 8.8 ZB SCHR.M10X1,25X30 U5740 8.8 ZB TORN.M10X1,25X30 U5740 8.8 ZB6 F01480112 ROSET.GROWER M10 ZN EXTRA P. GROWER WASHER D.10 RONDELLE GROWER D.10 SCHEIBE GROWER D.10 ARANDELA GROWER D.107 M20400122 BASE RIDUTTORE CAB GEARBOX SUPPORT SUPPORT BOITE DE VITESSE WECHSELGETRIEBE HALTER SOPORTE CAMBIO8 M29100152 COPPIA CONICA BEVEL GEAR PAIR PTO 1”3/8 Z=6 COUPLE CONIQUE P.T.O. 1”3/8Z=6 KEGELRITZELSATZ PTO 1”3/8 Z=6 PAR CONICO P.T.O. 1”3/8 Z=69 F02010133 GHIERA AU.GUP M40X1,5 T.4H ZN SELF LOCKING NUT M40X1,5 COLLIER AUTOBL.M40X1,5 T.4H ZN SELBSTSP. NUTMUTTER M40X1,5 VIROLA AUTOBL. M40X1,5 T.4H ZN10 M33100101 CORPO RIDUTTORE DL GEARBOX BOITE DE VITESSE WECHSELGETRIEBEGEHAEUSE CAJA CAMBIO11 F03010080 ANELLO T.A. 35X 47X 7 D3760NBR OIL SEAL 35X47X7 D3760NBR PARE-HUILE 35X47X7 D3760NBR OELABDICHTUNG 35X47X7 D3760NBR PARA-ACEITE 35X47X7 D3760NBR12 F04050014 CUSC.D35 D72 T18,25 30207 BEARING D35 D72 T18,25 30207 ROULEMENT 30207 LAGER 30207 COJINETE 3020713 F04050020 CUSC.D55 D100 T22,75 30211 BEARING D55 D100 T22,75 30211 ROULEMENT D55 D100 T22,75 LAGER D55 D100 T22,75 30211 COJINETE D55 D100 T22,75 3021114 M29100108 GUAR.SUP. PIGNONE PRESSPAN 0,3 GASKET MM.0,3 JOINT MM.0,3 DICHTUNG MM.0,3 JUNTA MM.0,315 M29100109 GUAR.SUP. PIGNONE PRESSPAN 0,5 GASKET MM.0,5 JOINT MM.0,5 DICHTUNG MM.0,5 JUNTA MM.0,516 M29100105 COPERCHIO PIGNONE BEARING SUPPORT COVER PINION COUVERCLE ROULEMENT LAGERDECKEL TAPA COJINETE17 F01480099 ROS.G 8,4X14,4X2,7 EX.C70 ZN GROWER WASHER D.8 RONDELLE GROWER D.8 SCHEIBE GROWER D.8 ARANDELA GROWER D.818 F01020436 VITE M 8X1,25X 20 U5739 8.8 ZN BOLT M8X1,25X20 U5739 8.8 ZN VIS M8X1,25X20 U5739 8.8 ZN SCHRA. M8X1,25X20 U5739 8.8 ZN TORN. M8X1,25X20 U5739 8.8 ZN19 F03150630 TAPPO SCARICO 1/2”GAS CON. OIL OUTLET PLUG 1/2” BOUCHON DE VIDANGE HUILE 1/2” OELABLASSPFROPFEN 1/2” TAPON DESCARGADO ACEITE 1/2”20 M33100103 TAPPO SFIATO CON AST.LIV.OLIO BREATHER PLUG BOUCHON DE SOUPIRAIL ENTLUEFTERSTOPFEN TAPON RESPIRADERO21 M33100599 DISTANZIALE PROTEZIONE ERP.ZN SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR22 M12400110 COMP.ATTACCO CUFFIA CENTRALE PROTECTION SUPPORT SUPPORT PROTECTION SCHUTZHALTER SOPORTE PROTECCION23 F01020445 VITE M8X1,25X30 U5739 8.8 ZN BOLT M 8X30 VIS M 8X30 SCHRAUBE M 8X30 TORNILLO M 8X3024 F01020470 VITE M10X1,5X20 U5739 8.8 ZN BOLT M10X1,5X20 U5739 8.8 ZN VIS M 10X20 SCHRAUBE M 10X20 TORNILLO M 10X2025 F01410064 ROS.M10 10,5X 20X 2 U6592 ZN WASHER M10 10,5X20X2 U6592 ZN RONDELL.M10 10,5X20X2 U6592 ZN SCHEIBE M10 10,5X20X2 U6592 ZN ARAND. M10 10,5X20X2 U6592 ZN26 M12400115 ATTACCO CUFFIA PROTECTION SUPPORT SUPPORT PROTECTION CARDAN GELENKWELLENSCHUTZ HALTER SOPORTE PROTECCION CARDANICO27 F01220011 DADO M 6X 1 D980 8 ZN NUT M6X1 D980 8 ZN ECROU M6X1 D980 8 ZN MUTTER M6X1 D980 8 ZN TUERCA M6X1 D980 8 ZN28 M10100168 PROTEZIONE CARDANO CARDAN PROTECTION PROTECTION CARDAN GELENKWELLENSCHUTZ PROTECCION CARDANICO29 F01410037 ROS.M6 6,4X12,5X1,6 U6592 ZN PLANE WASHER D.6 RONDELLE D.6 SCHEIBE D.6 ARANDELA D.630 F01020403 VITE M6X1X16 U5739 8.8 ZN BOLT M6X1X16 U5739 8.8 ZN VIS M6X1X16 U5739 8.8 ZN SCHRAUBE M6X1X16 U5739 8.8 ZN TORNILLO M6X1X16 U5739 8.8 ZN31 M38100146 MANICOTTO PROTEZIONE PDF 1”3/8 P.T.O. PROTECTION MANCHON DE PROTECTION P.T.O. ZAPFWELLENSCHUTZ P.T.O. MANGUITO PROTECCION P.T.O.32 M16100204 GUARNIZ.SUPPORTO CORONA GASKET SUPPORT MM.0,5 JOINT SUPPORT MM.0,5 HALTERDICHTUNG MM.0,5 JUNTA SOPORTE MM.0,533 M16100205 GUARNIZ. SUPPORTO CORONA GASKET SUPPORT MM.0,3 JOINT SUPPORT MM.0,3 HALTERDICHTUNG MM.0,3 JUNTA SOPORTE MM.0,334 M16100206 GUARNIZ. SUPPORTO CORONA GASKET SUPPORT MM.0,15 JOINT SUPPORT MM.0,15 HALTERDICHTUNG MM.0,15 JUNTA SOPORTE MM.0,1535 M29100107 GUAR.SUP. PIGNONE PRESSPAN 0,1 GASKET MM.0,1 JOINT MM.0,1 DICHTUNG MM.0,1 JUNTA MM.0,1

RIDUTTORE CENTRALE DL / CENTRAL REDUCTION UNIT DL

12 cod. F07021022

TAV.030B

DELFINO SUPER 2300 DELFINO SUPER 2300 2500 2500 3000 3000

1 F01010289 VITE M12X1,25X35 U5740 10.9 DL BOLT M12X1,25X35 U5740 10.9 VIS M 12X1,25X35 SCHRAUBE M 12X1,25X35 TORNILLO M 12X1,25X352 F01480123 ROS.G 12,5X22,9X 4 EX.C70 ZN WASHER M12 ZGP EXTRA P. RONDELLE M12 ZGP EXTRA P. UNTERLEGSCHEIBE M12 ZGP EXTRA ARANDELA M12 ZGP EXTRA P.3 M27100218 SUPPORTO CAMBIO RIDUTTORE ALTO GEARBOX SUPPORT SUPPORT BOITE DE VITESSE WECHSELGETRIEBE HALTER SOPORTE CAMBIO4 M27400115 FLANGIA DI CENTRAGGIO CENTERING FLANGE FLASQUE FLANSCH BRIDA5 F03010245 ANELLO T.A. 80X100X10 D3760NBR OIL SEAL 80X100X13/13 PARE-HUILE 80X100X10/13 OELABDICHTUNG 80X100X10/1 JUNTA DE AC. 80X100X10/136 M27400114 ALBERO DI TRASM. TRANSMISSION SHAFT ARBRE DE TRANSMISSION ANTRIEBSWELLE EJE DE TRASMISION7 F04050088 CUSC.D60 D95 T23 32012 BEARING D60 D95 T23 32012 ROULEMENT 32012 LAGER 32012 COJINETE 320128 M27400111 SUPPORTO CORONA SUPPORT SUPPORT HALTERUNG SOPORTE9 M20400124 COPPIA CONICA COMPL. Z15-Z23 BEVEL GEAR PAIR Z15-Z23 COUPLE CONIQUE Z15-Z23 KEGELRITZELSATZ Z15-Z23 PAR CONICO Z15-Z2310 F02010144 GHIERA AU.GUP M45X1,5 T.4H ZN SELF LOCKING NUT M45X1,5 T.4H COLLIER AUTOBL. M45X1,5 T.4H SELBSTSP. M45X1,5 T.4H ZN VIROLA AUTOBL. M45X1,5 T.4H11 M10100234 GUARN. FLANGIA CORONA PR 5/10 GASKET MM.0,5 JOINT COURONNE MM.0,5 FLANSCHDICHTUNG MM.0,5 JUNTA BRIDA MM.0,512 M10100248 GUARNIZIONE PRESPAN 3/10 GASKET MM.0,3 JOINT COURONNE MM.0,3 FLANSCHDICHTUNG MM.0,3 JUNTA BRIDA MM.0,313 M10100249 GUARNIZIONE 1/10 GASKET MM.0,1 JOINT COURONNE MM.0,1 FLANSCHDICHTUNG MM.0,1 JUNTA BRIDA MM.0,114 M27400103 CORPO RIDUTTORE GEARBOX BOITE DE VITESSE WECHSELGETRIEBEGEHAEUSE CAJA CAMBIO15 F03150630 TAPPO SCARICO 1/2”GAS CON. OIL OUTLET PLUG 1/2” BOUCHON DE VIDANGE HUILE 1/2” OELABLASSPFROPFEN 1/2” TAPON DESCARGADO ACEITE 1/2”16 M27100141 TAPPO SFIATO CON ASTINA LIV. BREATHER PLUG BOUCHON DE SOUPIRAIL ENTLUEFTERSTOPFEN TAPON RESPIRADERO17 F04050068 CUSC.D30 D62 T21,25 32206 BEARING D30 D62 T21,25 32206 ROULEMENT D30 D62 T21,25 32206 LAGER D30 D62 T21,25 32206 COJINETE D30 D62 T21,25 322018 F04050086 CUSC.D55 D100 T35 33211 BEARING D55 D100 T35 33211 ROULEMENT D55 D100 T35 33211 LAGER D55 D100 T35 33211 COJINETE D55 D100 T35 3321119 F03010286 ANEL. T.AS 45X 60X 7 D3760NBR OIL SEAL 45X60X7 PARE-HUILE 45X 60X 7 D3760NBR OELABDICHTUNG 45X 60X 7 PARA-ACEITE 45X 60X 7 D3760NBR20 M27100134 GUARNIZIONE MM.0,3 GASKET MM.0,3 JOINT MM.0,3 DICHTUNG MM.0,3 JUNTA MM.0,321 M27100135 GUARNIZIONE MM.0,5 GASKET MM.0,5 JOINT MM.0,5 DICHTUNG MM.0,5 JUNTA MM.0,522 M27100133 GUARNIZIONE MM.0,1 GASKET MM.0,1 JOINT MM.0,1 DICHTUNG MM.0,1 JUNTA MM.0,123 M27100140 GUARNIZIONE SUPP.MYLAR 0,05 GASKET MM.0,05 JOINT MM.0,05 DICHTUNG MM.0,05 JUNTA MM.0,0524 M27100132 FLANGIA SUPPORTO PIGNONE FLANGE SUPPORT PINION FLASQUE SUPPORT LAGERFLANSCH BRIDA SOPORTE25 F01480112 ROSET.GROWER M10 ZN EXTRA P. GROWER WASHER D.10 RONDELLE GROWER D.10 SCHEIBE GROWER D.10 ARANDELA GROWER D.1026 F01010244 VITE M10X1,25X25 U5740 8.8 ZN BOLT M10X1,25X25 U5740 8.8 ZN VIS M 10X1,25X25 SCHRAUBE M 10X1,25X25 TORNILLO M 10X1,25X2527 M12400110 COMP.ATTACCO CUFFIA CENTRALE PROTECTION SUPPORT SUPPORT PROTECTION SCHUTZHALTER SOPORTE PROTECCION28 F01480099 ROS.G 8,4X14,4X2,7 EX.C70 ZN GROWER WASHER D.8 RONDELLE GROWER D.8 SCHEIBE GROWER D.8 ARANDELA GROWER D.829 F01020436 VITE M 8X1,25X 20 U5739 8.8 ZN BOLT M8X1,25X20 U5739 8.8 ZN VIS M8X1,25X20 U5739 8.8 ZN SCHRA. M8X1,25X20 U5739 8.8 ZN TORN. M8X1,25X20 U5739 8.8 ZN30 F01020470 VITE M10X1,5X20 U5739 8.8 ZN BOLT M10X1,5X20 U5739 8.8 ZN VIS M 10X20 SCHRAUBE M 10X20 TORNILLO M 10X2031 F01410064 ROS.M10 10,5X 20X 2 U6592 ZN WASHER M10 10,5X20X2 U6592 ZN RONDELL.M10 10,5X20X2 U6592 ZN SCHEIBE M10 10,5X20X2 U6592 ZN ARAND. M10 10,5X20X2 U6592 ZN32 M12400115 ATTACCO CUFFIA PROTECTION SUPPORT SUPPORT PROTECTION CARDAN GELENKWELLENSCHUTZ HALTER SOPORTE PROTECCION CARDANICO33 F01220011 DADO M 6X 1 D980 8 ZN NUT M6X1 D980 8 ZN ECROU M6X1 D980 8 ZN MUTTER M6X1 D980 8 ZN TUERCA M6X1 D980 8 ZN34 M10100168 PROTEZIONE CARDANO CARDAN PROTECTION PROTECTION CARDAN GELENKWELLENSCHUTZ PROTECCION CARDANICO35 F01410037 ROS.M6 6,4X12,5X1,6 U6592 ZN PLANE WASHER D.6 RONDELLE D.6 SCHEIBE D.6 ARANDELA D.636 F01020403 VITE M6X1X16 U5739 8.8 ZN BOLT M6X1X16 U5739 8.8 ZN VIS M6X1X16 U5739 8.8 ZN SCHRAUBE M6X1X16 U5739 8.8 ZN TORNILLO M6X1X16 U5739 8.8 ZN37 M38100146 MANICOTTO PROTEZIONE PDF 1”3/8 P.T.O. PROTECTION MANCHON DE PROTECTION P.T.O. ZAPFWELLENSCHUTZ P.T.O. MANGUITO PROTECCION P.T.O.


13cod. F07021022

TAV.030BRIDUTTORE CENTRALE DL SUPER / CENTRAL REDUCTION UNIT DL SUPER

44 43

4647

45

48

4142

31

FINO A DELFINO SUPER 2500 (100 HP)UP TO DELFINO SUPER 2500 (100 HP)

14 cod. F07021022

TAV.040


15cod. F07021022

TAV.040

1 F03010739 ANELLO QOR DI 126,37X5,33 NBR GASKET QOR DI 126,37X5,33 NBR BAGUE QOR DI 126,37X5,33 NBR RING QOR DI 126,37X5,33 NBR ANILLO QOR DI 126,37X5,33 NBR2 F03010245 ANELLO T.A. 80X100X10 D3760NBR OIL SEAL 80X100X13/13 PARE-HUILE 80X100X10/13 OELABDICHTUNG 80X100X10/1 JUNTA DE AC. 80X100X10/133 M20400120 ALBERO TRASM. D=80 L=185 TRANSMISSION SHAFT D=80 L=185 ARBRE DE TRANSMIS.D=80 L=185 ANTRIEBSWELLE D=80 L=185 EJE DE TRASMISION D=80 L=1854 F04050083 CUSC.D55 D90 T23 32011 BEARING D55 D90 T23 32011 ROULEMENT D55 D90 T23 32011 LAGER D55 D90 T23 32011 COJINETE D55 D90 T23 32015 F01010250 VITE M10X1,25X30 U5740 8.8 ZN BOLT M10X1,25X30 U5740 8.8 ZB VIS M10X1,25X30 U5740 8.8 ZB SCHR.M10X1,25X30 U5740 8.8 ZB TORN.M10X1,25X30 U5740 8.8 ZB6 F01480112 ROSET.GROWER M10 ZN EXTRA P. GROWER WASHER D.10 RONDELLE GROWER D.10 SCHEIBE GROWER D.10 ARANDELA GROWER D.107 M20400122 BASE RIDUTTORE CAB GEARBOX SUPPORT SUPPORT BOITE DE VITESSE WECHSELGETRIEBE HALTER SOPORTE CAMBIO8 M16100205 GUARNIZ. SUPPORTO CORONA GASKET SUPPORT MM.0,3 JOINT SUPPORT MM.0,3 HALTERDICHTUNG MM.0,3 JUNTA SOPORTE MM.0,39 M16100206 GUARNIZ. SUPPORTO CORONA GASKET SUPPORT MM.0,15 JOINT SUPPORT MM.0,15 HALTERDICHTUNG MM.0,15 JUNTA SOPORTE MM.0,1510 M16100204 GUARNIZ.SUPPORTO CORONA GASKET SUPPORT MM.0,5 JOINT SUPPORT MM.0,5 HALTERDICHTUNG MM.0,5 JUNTA SOPORTE MM.0,511 M29100143 COPPIA CONICA BEVEL GEAR PAIR COUPLE CONIQUE KEGELRITZELSATZ PAR CONICO12 F02010133 GHIERA AU.GUP M40X1,5 T.4H ZN SELF LOCKING NUT M40X1,5 COLLIER AUTOBL.M40X1,5 T.4H ZN SELBSTSP. NUTMUTTER M40X1,5 VIROLA AUTOBL. M40X1,5 T.4H ZN13 M33100117 CORPO CAMBIO GEARBOX HOUSING REDUCTEUR UNTERSETZUNGSGETRIEBEKASTEN CAJA REDUCTOR14 M29100135 DISTANZ.CUSCINETTO 35X42,4X5 SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR15 M29100140 RUOTA DENTATA Z 16 GEAR Z-16 ENGRENAGE Z-16 ZAHNRAD WECHSELGETRIEBE Z-16 ENGRENAJE Z-1616 M29100141 RUOTA DENTATA Z 17 GEAR Z-17 ENGRENAGE Z-17 ZAHNRAD WECHSELGETRIEBE Z-17 ENGRANAJE Z-1717 M29100138 RUOTA DENTATA Z 15 GEAR Z-15 ENGRENAGE Z-15 ZAHNRAD WECHSELGETRIEBE Z-15 ENGRANAJE Z-1518 M29100139 RUOTA DENTATA Z 18 GEAR Z-18 ENGRENAGE Z-18 ZAHNRAD WECHSELGETRIEBE Z-18 ENGRANAJE Z-1819 M33100118 COPERCHIO POSTERIORE CAMBIO GEARBOX COVER COUVERCLE BOITE DE VITESSE WECHSELGETRIEBEDECKEL TAPA CAMBIO20 F01480099 ROS.G 8,4X14,4X2,7 EX.C70 ZN GROWER WASHER D.8 RONDELLE GROWER D.8 SCHEIBE GROWER D.8 ARANDELA GROWER D.821 F01020440 VITE M 8X1,25X25 U5739 8.8 ZN BOLT M8X1,25X25 U5739 8.8 ZN VIS M8X1,25X25 U5739 8.8 ZN SCHRA. M8X1,25X25 U5739 8.8 ZN TORNIL.M8X1,25X25 U5739 8.8 ZN22 M27100141 TAPPO SFIATO CON ASTINA LIV. BREATHER PLUG BOUCHON DE SOUPIRAIL ENTLUEFTERSTOPFEN TAPON RESPIRADERO23 F03150630 TAPPO SCARICO 1/2”GAS CON. OIL OUTLET PLUG 1/2” BOUCHON DE VIDANGE HUILE 1/2” OELABLASSPFROPFEN 1/2” TAPON DESCARGADO ACEITE 1/2”24 F04050070 CUSC.D35 D72 T24,25 32207 BEARING D35 D72 T24,25 32207 ROULEMENT 32207 LAGER 32207 COJINETE 3220725 F04050084 CUSC.D55 D100 T26,75 32211 BEARING D55 D100 T26,75 32211 ROULEMENT 32211 LAGER 32211 COJINETE 3221126 M29100109 GUAR.SUP. PIGNONE PRESSPAN 0,5 GASKET MM.0,5 JOINT MM.0,5 DICHTUNG MM.0,5 JUNTA MM.0,527 M29100107 GUAR.SUP. PIGNONE PRESSPAN 0,1 GASKET MM.0,1 JOINT MM.0,1 DICHTUNG MM.0,1 JUNTA MM.0,128 M29100108 GUAR.SUP. PIGNONE PRESSPAN 0,3 GASKET MM.0,3 JOINT MM.0,3 DICHTUNG MM.0,3 JUNTA MM.0,329 M29100105 COPERCHIO PIGNONE BEARING SUPPORT COVER PINION COUVERCLE ROULEMENT LAGERDECKEL TAPA COJINETE30 F01020436 VITE M 8X1,25X 20 U5739 8.8 ZN BOLT M8X1,25X20 U5739 8.8 ZN VIS M8X1,25X20 U5739 8.8 ZN SCHRA. M8X1,25X20 U5739 8.8 ZN TORN. M8X1,25X20 U5739 8.8 ZN31 M29100151 ALBERO PDF 18NICRMO5 UNI 5331 POWER TAKE-OFF SHAFT 1’3/8 Z=6 ARBRE PRISE DE FORCE 1’3/8 Z=6 ZAPFWELLE P.D.F. 1’3/8 Z=6 ARBOL TOMA DE FUERZA 1’3/8 Z=632 F04050014 CUSC.D35 D72 T18,25 30207 BEARING D35 D72 T18,25 30207 ROULEMENT 30207 LAGER 30207 COJINETE 3020733 F03010080 ANELLO T.A. 35X 47X 7 D3760NBR OIL SEAL 35X47X7 D3760NBR PARE-HUILE 35X47X7 D3760NBR OELABDICHTUNG 35X47X7 D3760NBR PARA-ACEITE 35X47X7 D3760NBR34 M29100130 GUAR.COP.P.D.F.PRESSPAN 0,1 GASKET MM.0,1 JOINT MM.0,1 DICHTUNG MM.0,1 JUNTA MM.0,135 M29100131 GUAR.COP. P.D.F. PRESSPAN 0,3 GASKET MM.0,3 JOINT MM.0,3 DICHTUNG MM.0,3 JUNTA MM.0,336 M29100132 GUAR.COP. P.D.F. PRESSPAN O,5 GASKET MM.0,5 JOINT MM.0,5 DICHTUNG MM.0,5 JUNTA MM.0,537 M29100128 COPERCHIO P.D.F. BEARING COVER P.D.F. COUVERCLE ROULEMENT P.D.F. LAGERDECKEL P.D.F. TAPA COJINETE P.D.F.38 M12400110 COMP.ATTACCO CUFFIA CENTRALE PROTECTION SUPPORT SUPPORT PROTECTION SCHUTZHALTER SOPORTE PROTECCION39 F01020449 VITE M 8X1,25X35 U5739 8.8 ZN BOLT M8X 1.25X35 U5739 8.8 ZN VIS M 8X35 SCHRAUBE M 8X35 TORNILLO M 8X3540 F20040011 ETICH.VEL .CAMBIO DL VIGNETO DL VIGNETO GEARBOX LABEL AUFKLEBER ETIQUETTE ETIQUETA41 F01020470 VITE M10X1,5X20 U5739 8.8 ZN BOLT M10X1,5X20 U5739 8.8 ZN VIS M 10X20 SCHRAUBE M 10X20 TORNILLO M 10X2042 F01410064 ROS.M10 10,5X 20X 2 U6592 ZN WASHER M10 10,5X20X2 U6592 ZN RONDELL.M10 10,5X20X2 U6592 ZN SCHEIBE M10 10,5X20X2 U6592 ZN ARAND. M10 10,5X20X2 U6592 ZN43 M12400115 ATTACCO CUFFIA PROTECTION SUPPORT SUPPORT PROTECTION CARDAN GELENKWELLENSCHUTZ HALTER SOPORTE PROTECCION CARDANICO44 F01220011 DADO M 6X 1 D980 8 ZN NUT M6X1 D980 8 ZN ECROU M6X1 D980 8 ZN MUTTER M6X1 D980 8 ZN TUERCA M6X1 D980 8 ZN45 M10100168 PROTEZIONE CARDANO CARDAN PROTECTION PROTECTION CARDAN GELENKWELLENSCHUTZ PROTECCION CARDANICO46 F01410037 ROS.M6 6,4X12,5X1,6 U6592 ZN PLANE WASHER D.6 RONDELLE D.6 SCHEIBE D.6 ARANDELA D.647 F01020403 VITE M6X1X16 U5739 8.8 ZN BOLT M6X1X16 U5739 8.8 ZN VIS M6X1X16 U5739 8.8 ZN SCHRAUBE M6X1X16 U5739 8.8 ZN TORNILLO M6X1X16 U5739 8.8 ZN48 M38100146 MANICOTTO PROTEZIONE PDF 1”3/8 P.T.O. PROTECTION MANCHON DE PROTECTION P.T.O. ZAPFWELLENSCHUTZ P.T.O. MANGUITO PROTECCION P.T.O.

CAMBIO / GEARBOX

16 cod. F07021022

TAV.050A


17cod. F07021022

1 F01220070 DADO M16X 1,5 D980 8 ZN NUT M16X 1,5 D980 8 ZB ECRO.M16X 1,5 D980 8 ZB MUTT.M16X 1,5 D980 8 ZB TUER.M16X 1,5 D980 8 ZB2 M26400419 ATTACCO MART. LAT REG RULLO GEARTRAY REINFORCEM. RENFORT LAMIER VERSTERKERUNG RENFUERZO TRANSM.3 M19400403 DISTANZ. D=25 D=16,5 L=20 SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR4 F01010346 VITE M16X1,5X 60 U5740 8.8 ZN BOLT M16X1,5X60 VIS M16X1,5X60 SCHRAUBE M16X1,5X60 TORNILLO M16X1,5X605 F20100048 PERNO D22 L48 C40 ZN BOLT D22 L48 C40 ZN GOUJON D22 L48 C40 BOLZEN D22 L48 C40 PERNO D22 L48 C406 F02200529 SPINA SCATTO D.11 ZN SNAP PIN D.11 FICHE A DETENTE D.11 EINRASTSTIFT D.11 CLAVIJA DE MUELLE D.117 M26400423 MARTINETTO REG.C=465 A=645 MECHANICAL JACK C=465 O=645 MANIVELLE MECHANIC C=465 A=645 MECHANISC. SPINDEL C=465 A=645 GATO MECHANICO C=465 A=6458 F01010319 VITE M14X1,5 X45 U5740 8.8 ZN BOLT M14X 1,5X 45 U5740 8.8 ZB VIS M14X1,5 X45 U5740 8.8 ZB SCH. M14X1,5 X45 U5740 8.8 ZB TORNILLO M14X1,5 X45 U5740 8.89 M20400404 PIASTRA DI ATTACCO MARTINETTO SUPPORT BRACKET PLAQUETTE ATTELAGE MANIVELLE WINDEHALTERUNG PLATTE ESTRIBO10 F01220059 DADO M14X 1,5 D980 8 ZN NUT M14X 1,5 D980 8 ZB ECROU M14X 1,5 D980 8 ZB MUTTER M14X 1,5 D980 8 ZB TUERCA M14X 1,5 D980 8 ZB

TAV.050AREGOLAZIONE MECCANICA DEI RULLI / ROLLERS MECHANICAL ADJUSTMENT

18 cod. F07021022

TAV.050B

1 F01010348 VIT.M16X 1,5X 70 U5740 8.8 ZN BOLT M16X 1,5X 70 U5740 8.8 VIS M16X1,5X70 SCHRAUBE M16X1,5X70 TORNILLO M16X1,5X702 M19400403 DISTANZ. D=25 D=16,5 L=20 SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR3 F20100048 PERNO D22 L48 C40 ZN BOLT D22 L48 C40 ZN GOUJON D22 L48 C40 BOLZEN D22 L48 C40 PERNO D22 L48 C404 M26400419 ATTACCO MART. LAT REG RULLO GEARTRAY REINFORCEM. RENFORT LAMIER VERSTERKERUNG RENFUERZO TRANSM.5 F01220070 DADO M16X 1,5 D980 8 ZN NUT M16X 1,5 D980 8 ZB ECRO.M16X 1,5 D980 8 ZB MUTT.M16X 1,5 D980 8 ZB TUER.M16X 1,5 D980 8 ZB6 M26400416 MART.IDR.A=50 C=135 L=640/505 HYDRAULIC ADJUSTER MANIVELLE HYDRAULIQUE HYDRAUL.SPINDELVERSTELLUNG GATO HYDRAULICO7 F02200529 SPINA SCATTO D.11 ZN SNAP PIN D.11 FICHE A DETENTE D.11 EINRASTSTIFT D.11 CLAVIJA DE MUELLE D.118 F03150842 ADATT.A 90° ORIENT.3/8-1/4 90° ADAPTOR 3/8-1/4 ADAPTEUR 90° PASSTUECK 90° ADAPTADOR 90°9 F03151040 PROLUNGA 3/8”M-F L=35 NIPPLE EXTENSION RALLONGE 3/8” VERLAENGERUNG PROLONGA RACOR10 F03100023 ROS. 17 X23X1,5 RAME -3/8” WASHER 17X23X1,5 RONDELLE 17X23X1,5 SCHEIBE 17X23X1,5 ARANDELA 17X23X1,511 F01020451 VITE M 8X1,25X45 U5739 8.8 ZN BOLT M8X 1.25X45 U5739 8.8 ZN VIS M 8X45 SCHRAUBE M 8X45 TORNILLO M 8X4512 F03150993 PIATTO X COLLARE SUPERIORE ZN PLATE PLAT PLATTE PLATO13 F03150992 COPPIA COLLARI X TUBO D.16 DOUBLE SUPPORT SUPPORT DOUBLE DOPPELHALTER SOPORTE DOBLE14 F01220022 DADO M 8X1,25 D980 8 ZN NUT M8X 1,25 D980 8 ZN ECROU M8X 1,25 D980 8 ZN MUTTER M8X 1,25 D980 8 ZN TUERCA M8X 1,25 D980 8 ZN15 M58100890 PREMONT.TUB.IDR.MART.LAT. GUA HYDRAULIC TUBE TUBE HYDRAUL. HYDRAUL. ROHR TUBO HYDRAULICO16 F20030012 ETICHETTA ABBASSAMENTO RULLI LABEL LOWERING LABEL ETIQUETTE AUFKLEBER ETIQUETA17 F20030081 ETICH.SCOPPIO TUBI WARNING LABEL ETIQUETTE AUFKLEBER ETIQUETA18 F20030083 ETICHETTA SOLLEVAMENTO RULLI ROLLER LIFTING LABEL ETIQUETTE AUFKLEBER ETIQUETA19 F03050188 TUBO FL.1/4 SAE100 R2AT L.1970 TUBE FL.1/4 SAE100 R2AT L.1970 TUBE FL.1/4 SAE100 R2AT L.1970 ROHR FL.1/4 SAE100 R2AT L.1970 TUBO FL.1/4 SAE100 R2AT L.197020 F01010319 VITE M14X1,5 X45 U5740 8.8 ZN BOLT M14X 1,5X 45 U5740 8.8 ZB VIS M14X1,5 X45 U5740 8.8 ZB SCH. M14X1,5 X45 U5740 8.8 ZB TORNILLO M14X1,5 X45 U5740 8.821 M20400404 PIASTRA ATTACCO MARTINETTO 0 0 0 022 F01220059 DADO M14X 1,5 D980 8 ZN NUT M14X 1,5 D980 8 ZB ECROU M14X 1,5 D980 8 ZB MUTTER M14X 1,5 D980 8 ZB TUERCA M14X 1,5 D980 8 ZB23 F03151219 RACCORDO -T- MASCHIO 1/4 ZN MALE T-UNION 1/4 ZN CONNECTION A T T VERBINDUNG JUNTURA A T


19cod. F07021022

TAV.050BREGOLAZIONE IDRAULICA DEI RULLI / ROLLERS HYDRAULIC ADJUSTMENT

20 cod. F07021022

7

6

4

5

8

9

1

2

321

22

24

23

6

20

29

7

6

4

5

8

9

1

2827

2522

6

26

25

2

3

20

18 - 98X16519 - 138X165

17

10

11

12

13

11

14

15

ROMPITRACCIA

WHEEL TRACK ERADICATOR

ROMPITRACCIA (BULLONE DI TRANCIO)

WHEEL TRACK ERADICATOR (SAFETY SHEAR BOLT)

ROMPITRACCIA (MOLLE)

WHEEL TRACK ERADICATOR (SAFETY SPRING)

TAV.060


21cod. F07021022

TAV.O60

1 F01010135 VITE M16X1,5 X180 5738 8.8 BR BOLT M 16X1,5X170 VIS M 16X1,5X170 SCHRAUBE M 16X1,5X170 TORNILLO M 16X1,5X1702 M36200241 STAFFA PER TUBO DA 80 STIRRUP ETRIER BUEGEL ESTRIBO3 F01220070 DADO M16X 1,5 D980 8 ZN NUT M16X 1,5 D980 8 ZB ECRO.M16X 1,5 D980 8 ZB MUTT.M16X 1,5 D980 8 ZB TUER.M16X 1,5 D980 8 ZB4 F01030117 KIT V.M12X1,75X60 U6104 8.8ZN KIT M12X1,75X60 VIS M12X1,75X60 SCHRAUBE M12X1,75X60 TORNILLO M12X1,75X605 M12400613 VOMERINO REV.257 X 65 X 10 REVERSIBLE POINT BECHE EFFACE-TRACE DROIT SPITZESCHUETZE REJA PARA C ISQU.6 F01220033 DADO M10X 1,5 D980 8 ZN NUT M10X 1,5 D980 8 ZN ECROU M10X 1,5 D980 8 ZN MUTTER M10X 1,5 D980 8 ZN TUERCA M10X 1,5 D980 8 ZN7 M12400602 SUPPORTO ANCORA ROMPITR. TOOTH FOR TRACK ERADICATOR POINTE POUR DENTS EFFACEUSE UNTERGRUNDLOCKERER PUNTA PARA BORROHUELLA8 M26100713 PERNO BLOCCAGGIO RUOTA WHEEL ADJUSTER PIN GOUJON BOLZEN PERNO9 F02200374 COPIGLIA R 4X 82 ZN SPRING SPLIT PIN 4X82 GOUPILLE 4X82 SPLINT 4X82 PASADOR 4X8210 M28100708 ANCORA DIRITTA STRAIGHT SUBSOILER TOOTH DENT EXTIRPATEUR GERADER ZINKE DIENTE DERECHO11 M20100714 PIASTRINA ATTACCO ANCORE ZINC. PLATE PLAQUETTE PLATTE PLAQUITA12 F01480145 ROS.G 17X29 X 5 EX.C70 ZN GROWER WASHER 17X29 RONDELLE GROWER 17X29 SCHEIBE GROWER 17X29 ARANDELA GROWER 17X2913 F01220266 DADO M16X 2 D980 8 ZN NUT M16X 2 D980 8 ZN ECROU M16X 2 D980 8 ZN MUTTER M16X 2 D980 8 ZN TUERCA M16X 2 D980 8 ZN14 M10100830 VOMERINO REVERS.DENTE HB SX REVERSIBLE POINT BECHE EFFACE-TRACE GAUCHE SPITZESCHUETZE REJA PARA C DERECHA15 F01030117 KIT V.M12X1,75X60 U6104 8.8ZN KIT M12X1,75X60 VIS M12X1,75X60 SCHRAUBE M12X1,75X60 TORNILLO M12X1,75X6016 M10100829 VOMERINO REVERS.DENTE HB DX REVERSIBLE POINT BECHE EFFACE-TRACE DROIT SPITZESCHUETZE REJA PARA C ISQU.17 M28100709 RINFORZO ANCORA DIRITTA ANT. TINE RENFORCEMENT VERSTAERKUNG REFUERZO18 F20110796 CAV.Q.M16X 2X 40 98X165 ZN U BOLT Q.M16X 2X 40 98X165 ATTEL.M16X2X40 98X165 ZB VERBI.M16X2X40 98X165 ZB PERNO M16X2X40 98X165 ZB19 F20110815 CAV.Q.M16X 2X 40 138X165 ZN U BOLT Q.M16X 2X 40 138X165 ATTEL.M16X2X40 138X165 ZB VERBI.M16X2X40 138X165 ZB PERNO M16X2X40 138X165 ZB20 M12400674 PIASTRA DI FISSAGGIO ANCORA SUPPORT SUPPORT HALTER SOPORTE21 F01010171 VITE M20X1,5X 75 U5738 8.8 ZN BOLT M20X1,5X75 VIS M20X1,5X75 SCHRAUBE M20X1,5X75 TORNILLO M20X1,5X7522 F01010171 VITE M20X1,5X 75 U5738 8.8 ZN BOLT M20X1,5X75 VIS M20X1,5X75 SCHRAUBE M20X1,5X75 TORNILLO M20X1,5X7523 F01220093 DADO M20X 1,5 D980 8 ZN SELF LOCKING NUT M20X1,5 D980 ECROU AUTOBL. M20X1,5 SELBSTSPERR.MUTTER M20X1,5 TUERCA AUTOBL. M20X1,524 M12400601 ROMPITRACCIA LATERALE TOOTH FOR TRACK ERADICATOR POINTE POUR DENTS EFFACEUSE UNTERGRUNDLOCKERER PUNTA PARA BORROHUELLA25 M12400612 MOLLA SPRING RESSORT FEDER MUELLE26 M12400609 ANCORA PER ROMPITRACCIA TOOTH DENT ZINKE DIENTE27 M12400607 TIRANTE M16 STRETCHER TENDEUR VERSTAERKUNGSROHR TENSOR28 F01200110 DADO M16X 2 U5587 6.8 ZN NUT M16 ECROU M16 MUTTER M16 TUERCA M1629 F01230085 DADO M16X 2 D982 8 ZN NUT M16X 2 D982 8 ZN ECROU M16X 2 D982 8 ZN MUTTER M16X 2 D982 8 ZN TUERCA M16X 2 D982 8 ZN

ROMPITRACCIA (OPTIONAL) / TRACK ERADICATOR (OPTIONAL)

22 cod. F07021022

12

181716

23222120

43

8

19

282726

29

1

2

9 - DELFINO 130010 - DELFINO 150011 - DELFINO 180012 - DELFINO 200013 - DELFINO 230014 - DELFINO 250015 - DELFINO 3000

314

7 8

24 25

30 6

5 7

TAV.070 NON COMPATIBILE IN COMBINAZIONE CON SEMINATRICE “COMPAGNA”

NOT COMPATIBLE IN COMBINATION WITH “COMPAGNA” SEED DRILL


23cod. F07021022

TAV.O70

1 F01010319 VITE M14X1,5X45 U5740 8.8ZN SCR. M14X1,5X45 U5740 8.8ZN VIS M14X1,5 X45 U5740 8.8 ZB SCH. M14X1,5 X45 U5740 8.8 ZB TORNILLO M14X1,5 X45 U5740 8.82 M19700553 BRACCIO RULLO ARM ROLLER 3 M20400721 COMP.ATT.MARTIN.REGOLAZ.BARRA MECH. ADJUSTER CONN.PLATE 4 F01220059 DADO M14X1,5 D980 8ZN NUT M14X1,5 D980 8ZN ECROU M14X 1,5 D980 8 ZN MUTTER M14X 1,5 D980 8 ZN TUERCA M14X 1,5 D980 8 ZN5 F01010291 VITE M12X1,25X40 U5740 8.8ZN SCR. M12X1,25X40 U5740 8.8ZN VIS M12X1,25X40 U5740 8.8 ZN SCHR.M12X1,25X40 U5740 8.8 ZN TORN. M12X1,25X40 U5740 8.8 ZN6 F01220081 DADO M18X1,5 D980 8ZN NUT M18X1,5 D980 8ZN ECROU AUTOBL. M18X1,5 980-V SELBSTSP.MUTT. M18X1,5 980-V DADO AUTOBL. M18X1,5 980-V7 F01010362 VITE M18X1,5X45 U5740 8.8ZN SCR. M18X1,5X45 U5740 8.8ZN VIS M 18X1,5X45 SCHRAUBE M 18X1,5X45 TORNILLO M 18X1,5X458 F01200073 DADO M12X1,25 U5587 6SZN NUT M12X1,25 U5587 6SZN ECROU M12X1,25 U5587 6S ZN MUTTER M12X1,25 U5587 6S ZN TUERCA M12X1,25 U5587 6S ZN9 M23413783 BARRA LIVELLATRICE L=1284 REAR BAR 1300 BARRE ARRIERE 1300 KOMPL. HINTERE SCHINE 1300 BARRA TRASERA 130010 M23415783 BARRA LIVELLATRICE L=1530 REAR BAR 1500 BARRE ARRIERE 1500 KOMPL. HINTERE SCHINE 1500 BARRA TRASERA 150011 M23418783 BARRA LIVELLATRICE L=1773 REAR BAR 1800 BARRE ARRIERE 1800 KOMPL. HINTERE SCHINE 1800 BARRA TRASERA 180012 M23420783 BARRA LIVELLATRICE L=2000 REAR BAR 2000 BARRE ARRIERE 2000 KOMPL. HINTERE SCHINE 2000 BARRA TRASERA 200013 M23423783 BARRA LIVELLATRICE L=2265 REAR BAR 2300 BARRE ARRIERE 2300 KOMPL. HINTERE SCHINE 2300 BARRA TRASERA 230014 M23425783 BARRA LIVELLATRICE L=2511 REAR BAR 2500 BARRE ARRIERE 2500 KOMPL. HINTERE SCHINE 2500 BARRA TRASERA 250015 M23430783 BARRA LIVELLATRICE L=3003 REAR BAR 3000 BARRE ARRIERE 3000 KOMPL. HINTERE SCHINE 3000 BARRA TRASERA 300016 F01060209 VITE M10X1,5X200 U5731* 8.8ZN SCR. M10X1,5X200 U5731* 8.8ZN VIS M 10X1,5X200 SCHRAUBE M 10X1,5X200 TORNILLO M 10X1,5X20017 M43400464 PIASTRA ATTACCO MARTINETTO PLATE PF JACK ATTACK 18 F01220033 DADO M10X1,5 D980 8ZN NUT M10X1,5 D980 8ZN ECROU M10X1,5 D980 8ZN MUTTER M10X1,5 D980 8ZN TUERCA M10X1,5 D980 8ZN19 M36200887 MART.MECCANICO REG.BARRA DM R. MECHANICAL ADJUSTER BAR DM R. MANIVELLE MECHANIQUE SPINDELVERSTELLUNG GATO MECANICO20 F01010194 VITE M22X1,5X110 U5738 8.8ZN SCR. M22X1,5X110 U5738 8.8ZN 21 M23400945 COMP.ASTA REGOLAZ. MARTINETTI RULER ASSEMBLY 22 F01100048 ING.M 8X1,25 7663A 9SMNPB28 ZN GREASE NIPPLE M8X1,25 U7663A GRAISSEUR A BILLES M8X1,25 SCHMIERBUECHSE M8X1,25 7663A ENGRAS. DE ESFERAS M8 X 1,25 A23 M36200808 COMP. MANICO VITE ‘ HANDLE SCREW 24 F05100015 TAPPO AD ALETTA D=22 PLT NERO CAP BOUCHON DECKEL CORCHO25 F01020072 VITE M8X1,25X50 U5737 8.8ZN SCR. M8X1,25X50 U5737 8.8ZN VIS M8X1,25X50 U5737 8.8 ZN SCHR. M8X1,25X50 U5737 8.8 ZN TORN. M8X1,25X50 U5737 8.8 ZN26 F01220022 DADO M8X1,25 D980 8ZN NUT M8X1,25 D980 8ZN ECROU M8X 1,25 D980 8 ZN MUTTER M8X 1,25 D980 8 ZN TUERCA M8X 1,25 D980 8 ZN27 M58100613 DADO VITE REG. BARRA ZN NUT ECROU MUTTER DADO28 F01460051 MOL.T 40X 20,3X 2 D2093 ZN CUP SPRING 40X 20,3X 2 D2093 29 F02200529 SPINA SCATTO D.11 H58 ZN SNAP PIN D.11 H58 ZN FICHE A DETENTE D.11 H58 ZN EINRASTSTIFT D.11 H58 ZN CLAVIJA DE MUELLE D.11 H58 ZN30 F01230269 DADO M22X1,5 D985 6SZN NUT M22X1,5 D985 6S ZN ECROU AUTOBL.M22X1,5 D985 6SZN SELBST.MUTT.M22X1,5 D985 6S ZN DADO AUTOBL.M22X1,5 D985 6S ZN31 M20400722 PIASTRA DESTRA RH CONN.PLATE

BARRA LIVELLATRICE (OPTIONAL) / LEVELLING BAR (OPTIONAL)

24 cod. F07021022

TAV.080

1 M23400553 PROTEZ. ANTERIORE CE FRONT PROTECTION CE PROTECTION AVANT CE VORDERER SCHUTZ CE PROTECCION DELANTERA CE2 M23400552 PROTEZIONI ANTERIORI CE FRONT PROTECTION CE PROTECTION AVANT CE VORDERER SCHUTZ CE PROTECCION DELANTERA CE3 M23400550 PROTEZIONI ANTERIORI CE FRONT PROTECTION CE PROTECTION AVANT CE VORDERER SCHUTZ CE PROTECCION DELANTERA CE4 F01220033 DADO M10X 1,5 D980 8 ZN NUT M10X 1,5 D980 8 ZN ECROU M10X 1,5 D980 8 ZN MUTTER M10X 1,5 D980 8 ZN TUERCA M10X 1,5 D980 8 ZN5 F20110730 CAV.Q.M10X 1,5X 30 91X 99 ZN STRIKER M10X 1,5X 30 91X 99 ZB BUTEE M10X 1,5X 30 91X 99 ZB ANSCHLAG M10X 1,5X 30 91X 99 EL. DE EMPALME M10X 1,5X 306 M20413624 PROTEZ.POSTERIORE CE 1300 REAR PROTECTION PROTECTION ARRIERE HINTERER SCHUTZ PROTECCION TRASERA7 M20415624 PROTEZ.POSTERIORE CE 1500 REAR PROTECTION PROTECTION ARRIERE HINTERER SCHUTZ PROTECCION TRASERA8 M20418624 PROTEZ.POSTERIORE CE 1800 REAR PROTECTION PROTECTION ARRIERE HINTERER SCHUTZ PROTECCION TRASERA9 M20420624 PROTEZ.POSTERIORE CE 2000 REAR PROTECTION PROTECTION ARRIERE HINTERER SCHUTZ PROTECCION TRASERA10 M20423624 PROTEZ.POSTERIORE CE 2300 REAR PROTECTION PROTECTION ARRIERE HINTERER SCHUTZ PROTECCION TRASERA11 M20425624 PROTEZ.POSTERIORE CE 2300 REAR PROTECTION PROTECTION ARRIERE HINTERER SCHUTZ PROTECCION TRASERA12 F01010026 VITE M10X1,25X40 U5738 8.8 ZN BOLT M 10X1,25X40 VIS M 10X1,25X40 SCHRAUBE M 10X1,25X40 TORNILLO M 10X1,25X4013 F01200048 DADO ALTO M10X1,25 5587 6S BR NUT M10X1,25 ECROU M10X1,25 MUTTER M10X1,25 DADO M10X1,2514 F01010262 VITE M10X1,25X50 U5740 8.8 ZN BOLT M16X 1,5X 70 U5740 8.8 VIS M 10X1,25X50 SCHRAUBE M 10X1,25X50 TORNILLO M 10X1,25X5015 F01220034 DADO M10X1,25 D980 8 ZN NUT M10X1,25 D980 8 ZB ECRO.M10X1,25 D980 8 ZB MUTT.M10X1,25 D980 8 ZB TUER.M10X1,25 D980 8 ZB


25cod. F07021022

TAV.O80PROTEZIONI CE / EC PROTECTIONS

26 cod. F07021022

TAV. GB01D


27cod. F07021022

1 M43413473 ROTORE RULLO GB 450 1000C CAGE ROLLER ROTOR D=450 1300 ROTOR ROULEAU A CAGE 450 1300 STABWALZEROTOR D=450 1300 ROTOR RODILLO BARRAS 450 13002 M43415473 ROTORE RULLO GB D=450 1500A CAGE ROLLER ROTOR D=450 1500 ROTOR ROULEAU A CAGE 450 1500 STABWALZEROTOR D=450 1500 ROTOR RODILLO BARRAS 450 15003 M43418473 ROTORE RULLO GB 450 1500C CAGE ROLLER ROTOR D=450 1500C ROTOR ROULEAU A CAGE 450 1500C STABWALZEROTOR D=450 1500C ROTOR RODILLO BARRAS 450 1500C4 M43420473 ROTORE RULLO GB 450 2000A CAGE ROLLER ROTOR D=450 2000A ROTOR ROULEAU A CAGE 450 2000A STABWALZEROTOR D=450 2000A ROTOR RODILLO BARRAS 450 2000A5 M43423473 ROTORE RULLO GB 450 2000C CAGE ROLLER ROTOR D=450 2000C ROTOR ROULEAU A CAGE 450 2000C STABWALZEROTOR D=450 2000C ROTOR RODILLO BARRAS 450 2000C6 M43425473 ROTORE RULLO GB 450 2500A CAGE ROLLER ROTOR D=450 2500A ROTOR ROULEAU A CAGE 450 2500A STABWALZEROTOR D=450 2500A ROTOR RODILLO BARRAS 450 2500A7 M43430473 ROTORE RULLO GB 450 3000A CAGE ROLLER ROTOR D=450 3000A ROTOR ROULEAU A CAGE 450 3000A STABWALZEROTOR D=450 3000A ROTOR RODILLO BARRAS 450 3000A8 M23413717 ROTORE RULLO GB. D=370 1000C CAGE ROLLER ROTOR D=370 1300 ROTOR ROULEAU D=370 1300 STABWALZEROTOR D=370 1300 ROTOR RODILLO BARRAS D370 13009 M23415717 ROTORE RULLO GB. D=370 1500A CAGE ROLLER ROTOR D=370 1500 ROTOR ROULEAU D=370 1500 STABWALZEROTOR D=370 1500 ROTOR RODILLO BARRAS D370 150010 M23418717 ROTORE RULLO GB. D=370 1500C CAGE ROLLER ROTOR D=370 1800 ROTOR ROULEAU D=370 1800 STABWALZEROTOR D=370 1800 ROTOR RODILLO BARRAS D370 180011 M23420717 ROTORE RULLO GB. D=370 2000A CAGE ROLLER ROTOR D=370 2000 ROTOR ROULEAU D=370 2000 STABWALZEROTOR D=370 2000 ROTOR RODILLO BARRAS D370 200012 M23423717 ROTORE RULLO GB. D=370 2000C CAGE ROLLER ROTOR D=370 2300 ROTOR ROULEAU D=370 2300 STABWALZEROTOR D=370 2300 ROTOR RODILLO BARRAS D370 230013 M23425717 ROTORE*RULLO GB.370 2500A CAGE ROLLER ROTOR D370 2500A ROTOR D370 2500A STABWALZEROTOR D370 2500A ROTOR RODILLO BARRAS D370 250014 M23430717 ROTORE*RULLO GB.370 3000A CAGE ROLLER ROTOR D370 3000A ROTOR D370 3000A STABWALZEROTOR D370 3000A ROTOR RODILLO BARRAS D370 300015 F01010281 VITE M12X1,25X25 U5740 8.8 ZN BOLT M 12X1,25X25 VIS M 12X1,25X25 SCHRAUBE M 12X1,25X25 TORNILLO M 12X1,25X2516 F01010082 VITE M14X1,5 X50 U5738 8.8 ZN BOLT M 14X1,5X50 VIS M 14X1,5X50 SCHRAUBE M 14X1,5X50 TORNILLO M 14X1,5X5017 F01410088 ROS.M14 15X 28X2,5 U6592 ZN WAS.M14 15X 28X2,5 U6592 ZB RON.M14 15X 28X2,5 U6592 ZB SCH.M14 15X 28X2,5 U6592 ZB ARA.M14 15X 28X2,5 U6592 ZB18 M43400619 FIANCATA RULLO ROLLER SIDE PANEL COTE ROULEAU WALZENSEITENWAND FLANCO RODILLO19 M43400650 DISTANZIALE 5 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR20 M43400657 DISTANZIALE 10 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR21 F01220059 DADO M14X 1,5 D980 8 ZN NUT M14X 1,5 D980 8 ZB ECROU M14X 1,5 D980 8 ZB MUTTER M14X 1,5 D980 8 ZB TUERCA M14X 1,5 D980 8 ZB22 M43413660 TRAVE POST.RULLO GB. 1000C SOIL SCRAPER FRAME GB.1300 CHASSIS ATT.DECROT GB.1300 ABSTREIFERRAHMEN GB.1300 TELAR ATAQ.RASQ GB.130023 M43415660 TRAVE POST.RULLO GB. 1500A SOIL SCRAPER FRAME GB.1500 CHASSIS ATT.DECROT GB.1500 ABSTREIFERRAHMEN GB.1500 TELAR ATAQ.RASQ GB.150024 M43418660 TRAVE POST.RULLO GB. 1500C SOIL SCRAPER FRAME GB.1800 CHASSIS ATT.DECROT GB.1800 ABSTREIFERRAHMEN GB.1800 TELAR ATAQ.RASQ GB.180025 M43420660 TRAVE POST.RULLO GB. 2000A SOIL SCRAPER FRAME GB.2000 CHASSIS ATT.DECROT GB.2000 ABSTREIFERRAHMEN GB.2000 TELAR ATAQ.RASQ GB.200026 M43423660 TRAVE POST.RULLO GB. 2000C SOIL SCRAPER FRAME GB.2300 CHASSIS ATT.DECROT GB.2300 ABSTREIFERRAHMEN GB.2300 TELAR ATAQ.RASQ GB.230027 M43425660 TRAVE POST.RULLO GB. 2500A SOIL SCRAPER FRAME GB.2500 CHASSIS ATT.DECROT GB.2500 ABSTREIFERRAHMEN GB.2500 TELAR ATAQ.RASQ GB.250028 M43430660 TRAVE POST.RULLO GB. 3000A SOIL SCRAPER FRAME GB.3000 CHASSIS ATT.DECROT GB.3000 ABSTREIFERRAHMEN GB.3000 TELAR ATAQ.RASQ GB.300029 M43400649 DISTANZIALE 2 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR30 M43400467 COMP.SUPP.CUSC.OSCIL.H42 X RIC COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.31 M43400607 COMP.SUPP.CUSC.OSCIL.H42 COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.32 F01010288 VITE M12X1,25X35 U5740 8.8 ZN BOLT M12X1,25X35 U5740 8.8 ZN VIS M12X1,25X35 U5740 8.8 ZN SCHR.M12X1,25X35 U5740 8.8 ZN TORN.M12X1,25X35 U5740 8.8 ZN33 F01480123 ROS.G 12,5X22,9X 4 EX.C70 ZN WASHER M12 ZGP EXTRA P. RONDELLE M12 ZGP EXTRA P. UNTERLEGSCHEIBE M12 ZGP EXTRA ARANDELA M12 ZGP EXTRA P.34 F01220047 DADO M12X1,25 D980 8 ZN NUT M12X1,25 D980 8 ZN ECROU M12X1,25 D980 8 ZN MUTTER M12X1,25 D980 8 ZN TUERCA M12X1,25 D980 8 ZN35 M43413474 TUBO D=30 S=2,8 1000C PIPE D=30 S=2,8 1300 TUBE D=30 S=2,8 1300 ROHR D=30 S=2,8 1300 TUBO D=30 S=2,8 130036 M43415474 TUBO D=30 S=2,8 1500A PIPE D=30 S=2,8 1500 TUBE D=30 S=2,8 1500 ROHR D=30 S=2,8 1500 TUBO D=30 S=2,8 150037 M43418474 TUBO D=30 S=2,8 1500C PIPE D=30 S=2,8 1800 TUBE D=30 S=2,8 1800 ROHR D=30 S=2,8 1800 TUBO D=30 S=2,8 180038 M43420474 TUBO D=30 S=2,8 2000A PIPE D=30 S=2,8 2000 TUBE D=30 S=2,8 2000 ROHR D=30 S=2,8 2000 TUBO D=30 S=2,8 200039 M43423474 TUBO D=30 S=2,8 2000C PIPE D=30 S=2,8 2300 TUBE D=30 S=2,8 2300 ROHR D=30 S=2,8 2300 TUBO D=30 S=2,8 230040 M43425474 TUBO D=30 S=2,8 2500A PIPE D=30 S=2,8 2500 TUBE D=30 S=2,8 2500 ROHR D=30 S=2,8 2500 TUBO D=30 S=2,8 250041 M43430474 TUBO D=30 S=2,8 3000A PIPE D=30 S=2,8 3000 TUBE D=30 S=2,8 3000 ROHR D=30 S=2,8 3000 TUBO D=30 S=2,8 300042 M43400477 PIATTO DI FERMO LOCKING STIRRUP ETRIER DE BLOCAGE BLOCKIERUNGSBUEGEL ESTRIBO BLOQUEO43 F02100142 SPINA E.P. 8X 40 U6873 C70 BR ELASTIC PIN 8X40 GOUJON ELASTIQUE 8X40 SPANNHUELSE 8X40 ESPINA ELASTICA 8X4044 M43400704 GUARNIZIONE METALLICA H42 GASKET H42 JOINT H42 DICHTUNG H42 JUNTA45 F01100011 ING.M 6X1 7663-A 9SMNPB28 ZN GREASE NIPPLE M6X1 7663-A ZN GRAISS. A BILLE M6X1 7663A ZN SCHMIERBUECHE M6X1 7663-A ZN ENGRAS. DE ESFERAS M6X1 7663-A46 M23400439 FLANGIA SUPP. RULLO OSC. H. 42 SUPPORT FLANGE H.42 SUPPORT H.42 HALTER H.42 SOPORTE H.4247 F02050168 ANELLO E. DE 40X1,75 U7435 C70 SEEGER RING 40X1,75 U7435 C70 BAGUE SEEGER 40X1,75 U7435 C70 SEEGERRING 40X1,75 U7435 C70 ANIL.SEEGER 40X1,75 U7435 C7048 M48000307 ANELLO RINF.40X50X1,5 C70 STIFFENER RING 40X50X1,5 C70 BAGUE DE RENFORCEM. 40X50X1,5 SEEGER RING 40X50X1,5 C70 ANILLO REFUERZO 40X50X1,549 F04010184 CUSC.D40 D80 BOMB.18 6208 2RS1 BEARING D40 D80 BOMB.18 6208 ROULEMENT D40 D80 BOMB.18 6208 LAGER D40 D80 BOMB.18 6208 2RS COJINETE D40 D80 BOMB.18 620850 M38100990 GUARNIZIONE ELASTICA GASKET JOINT DICHTUNG JUNTA51 F01220034 DADO M10X1,25 D980 8 ZN NUT M10X1,25 D980 8 ZB ECRO.M10X1,25 D980 8 ZB MUTT.M10X1,25 D980 8 ZB TUER.M10X1,25 D980 8 ZB52 M23400438 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO53 M43400707 FLANGIA SPESSORE INNER FLANGE FLASQUE INTERIEUR INNENFLANSCH BRIDA INTERNA54 F01010244 VITE M10X1,25X25 U5740 8.8 ZN BOLT M10X1,25X25 U5740 8.8 ZN VIS M 10X1,25X25 SCHRAUBE M 10X1,25X25 TORNILLO M 10X1,25X2555 M43400651 DISTANZIALE D190 D74 L5 SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR56 M43400610 GUARN. METALLICA SP.1 SEMINAT. METALIC GASKET SP.1 JOINT SP.1 DICHTUNG SP.1 JUNTA SP.157 F01100012 ING.M 6X1 7663-B 9SMNPB28 ZN SPHERE NIPPLE M6x17663-B ZB GRAISSEUR A BILLES M6X1 7663-B KUGELFETTBsCHSE M6X1 7663-B ZB ENGGRAS.M6X1 7663-B 9SMNPB2858 M43400702 >SUPPORTO CUSC.OSCILLANTE H42 BEARING SUPPORT SUPPORT ROULEMENT LAGERHALTER SOPORTE COJINETE59 M43400608 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO

TAV. GB01DGR. RULLO GABBIA / CAGE ROLLER UNIT

28 cod. F07021022

TAV. PK01D


29cod. F07021022

1 M23413712 ROTORE RULLO PACKER D500 1000C ROTOR PACKER ROLLER 500 1000C ROTOR D500 1000C HERSE PACKERWALZEROTOR 1000C D500 ROTOR RODILLO PACK 1000C D5002 M23415712 ROTORE*RULLO PK.500 1500A ROTOR PACKER ROLLER 500 1500A ROTOR D500 1500A HERSE PACKERWALZEROTOR 1500A D500 ROTOR RODILLO PACK 1500A D5003 M23418712 ROTORE*RULLO PK.500 1500C PACKER ROLLER ROTOR 1500C D500 ROTOR D500 1500C HERSE PACKERWALZEROTOR 1500C D500 ROTOR RODILLO PACK 1500C D5004 M23420712 ROTORE*RULLO PK.500 2000A PACKER ROLLER ROTOR 2000A D500 ROTOR D500 2000A HERSE PACKERWALZEROTOR 2000A D500 ROTOR RODILLO PACK 2000A D5005 M23423712 ROTORE*RULLO PK.500 2000C PACKER ROLLER ROTOR 2000C D500 ROTOR D500 2000C HERSE PACKERWALZEROTOR 2000C D500 ROTOR RODILLO PACK 2000C D5006 M23425712 ROTORE*RULLO PK.500 2500A PACKER ROLLER ROTOR 2500 D500 ROTOR D500 2500 HERSE PACKERWALZEROTOR 2500 D500 ROTOR RODILLO PACKER 2500 D5007 M23430712 ROTORE*RULLO PK.500 3000A PACKER ROLLER ROTOR 3000 D500 ROTOR D500 3000 HERSE PACKERWALZEROTOR 3000 D500 ROTOR RODILLO PACKER 3000 D5008 M23413713 ROTORE*RULLO PK.450 1000C PACKER ROLLER ROTOR 450 1000C ROTOR D450 1300 HERSE PACKERWALZEROTOR 1300 D450 ROTOR RODILLO PACK 1300 D4509 M23415713 ROTORE*RULLO PK.450 1500A PACKER ROLLER ROTOR 450 1500A ROTOR D450 1500A HERSE PACKERWALZEROTOR 1500A D450 ROTOR RODILLO PACK 1500A D45010 M23418713 ROTORE*RULLO PK.450 1500C PACKER ROLLER ROTOR 1500C D450 ROTOR D450 1500C HERSE PACKERWALZEROTOR 1500C D450 ROTOR RODILLO PACK 1500C D45011 M23420713 ROTORE*RULLO PK.450 2000A PACKER ROLLER ROTOR 2000A D450 ROTOR D450 2000A HERSE PACKERWALZEROTOR 2000A D450 ROTOR RODILLO PACK 2000A D45012 M23423713 ROTORE*RULLO PK.450 2000C PACKER ROLLER ROTOR 2000C D450 ROTOR D450 2000C HERSE PACKERWALZEROTOR 2000C D450 ROTOR RODILLO PACK 2000C D45013 M23425713 ROTORE*RULLO PK.450 2500A PACKER ROLLER ROTOR 2500A D450 ROTOR D450 2500A HERSE PACKERWALZEROTOR 2500A D450 ROTOR RODILLO PACK 2500A D45014 M23430713 ROTORE*RULLO PK.450 3000A PACKER ROLLER ROTOR 3000A D450 ROTOR D450 3000A HERSE PACKERWALZEROTOR 3000A D450 ROTOR RODIL PACK 3000A D45015 F01010281 VITE M12X1,25X25 U5740 8.8 ZN BOLT M 12X1,25X25 VIS M 12X1,25X25 SCHRAUBE M 12X1,25X25 TORNILLO M 12X1,25X2516 F01010082 VITE M14X1,5 X50 U5738 8.8 ZN BOLT M 14X1,5X50 VIS M 14X1,5X50 SCHRAUBE M 14X1,5X50 TORNILLO M 14X1,5X5017 F01410088 ROS.M14 15X 28X2,5 U6592 ZN WAS.M14 15X 28X2,5 U6592 ZB RON.M14 15X 28X2,5 U6592 ZB SCH.M14 15X 28X2,5 U6592 ZB ARA.M14 15X 28X2,5 U6592 ZB18 M43400619 FIANCATA RULLO ROLLER SIDE PANEL COTE ROULEAU WALZENSEITENWAND FLANCO RODILLO19 M43400650 DISTANZIALE 5 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR20 M43400657 DISTANZIALE 10 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR21 F01220059 DADO M14X 1,5 D980 8 ZN NUT M14X 1,5 D980 8 ZB ECROU M14X 1,5 D980 8 ZB MUTTER M14X 1,5 D980 8 ZB TUERCA M14X 1,5 D980 8 ZB22 M43413667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50023 M43415667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50024 M43418667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50025 M43420667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50026 M43423667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50027 M43425667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50028 M43430667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50029 M43400649 DISTANZIALE 2 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR30 M43400467 COMP.SUPP.CUSC.OSCIL.H42 X RIC COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.31 M43400607 COMP.SUPP.CUSC.OSCIL.H42 COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.32 F01010288 VITE M12X1,25X35 U5740 8.8 ZN BOLT M12X1,25X35 U5740 8.8 ZN VIS M12X1,25X35 U5740 8.8 ZN SCHR.M12X1,25X35 U5740 8.8 ZN TORN.M12X1,25X35 U5740 8.8 ZN33 F01480123 ROS.G 12,5X22,9X 4 EX.C70 ZN WASHER M12 ZGP EXTRA P. RONDELLE M12 ZGP EXTRA P. UNTERLEGSCHEIBE M12 ZGP EXTRA ARANDELA M12 ZGP EXTRA P.35 F01060208 VITE M10X1,5X25 U5731 8.8 ZN BOLT M10X1,5X25 VIS M10X1,5X25 SCHRAUBE M10X1,5X25 TORNILLO M10X1,5X2536 M23400958 PIASTRINA RASCH. PER PK TUNGST SCRETCHING PLATE FOR PK ROLLER PLAT DU DECROT.ROUL.PK ABSTREIFER PLATTE PK PLACA RASQUETA PK37 F01410064 ROS.M10 10,5X 20X 2 U6592 ZN WASHER M10 10,5X20X2 U6592 ZN RONDELL.M10 10,5X20X2 U6592 ZN SCHEIBE M10 10,5X20X2 U6592 ZN ARAND. M10 10,5X20X2 U6592 ZN38 F01220033 DADO M10X 1,5 D980 8 ZN NUT M10X 1,5 D980 8 ZN ECROU M10X 1,5 D980 8 ZN MUTTER M10X 1,5 D980 8 ZN TUERCA M10X 1,5 D980 8 ZN44 M43400704 GUARNIZIONE METALLICA H42 GASKET H42 JOINT H42 DICHTUNG H42 JUNTA45 F01100011 ING.M 6X1 7663-A 9SMNPB28 ZN GREASE NIPPLE M6X1 7663-A ZN GRAISS. A BILLE M6X1 7663A ZN SCHMIERBUECHE M6X1 7663-A ZN ENGRAS. DE ESFERAS M6X1 7663-A46 M23400439 FLANGIA SUPP. RULLO OSC. H. 42 SUPPORT FLANGE H.42 SUPPORT H.42 HALTER H.42 SOPORTE H.4247 F02050168 ANELLO E. DE 40X1,75 U7435 C70 SEEGER RING 40X1,75 U7435 C70 BAGUE SEEGER 40X1,75 U7435 C70 SEEGERRING 40X1,75 U7435 C70 ANIL.SEEGER 40X1,75 U7435 C7048 M48000307 ANELLO RINF.40X50X1,5 C70 STIFFENER RING 40X50X1,5 C70 BAGUE DE RENFORCEM. 40X50X1,5 SEEGER RING 40X50X1,5 C70 ANILLO REFUERZO 40X50X1,549 F04010184 CUSC.D40 D80 BOMB.18 6208 2RS1 BEARING D40 D80 BOMB.18 6208 ROULEMENT D40 D80 BOMB.18 6208 LAGER D40 D80 BOMB.18 6208 2RS COJINETE D40 D80 BOMB.18 620850 M38100990 GUARNIZIONE ELASTICA GASKET JOINT DICHTUNG JUNTA51 F01220034 DADO M10X1,25 D980 8 ZN NUT M10X1,25 D980 8 ZB ECRO.M10X1,25 D980 8 ZB MUTT.M10X1,25 D980 8 ZB TUER.M10X1,25 D980 8 ZB52 M23400438 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO53 M43400707 FLANGIA SPESSORE INNER FLANGE FLASQUE INTERIEUR INNENFLANSCH BRIDA INTERNA54 F01010244 VITE M10X1,25X25 U5740 8.8 ZN BOLT M10X1,25X25 U5740 8.8 ZN VIS M 10X1,25X25 SCHRAUBE M 10X1,25X25 TORNILLO M 10X1,25X2555 M43400651 DISTANZIALE D190 D74 L5 SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR56 M43400610 GUARN. METALLICA SP.1 SEMINAT. METALIC GASKET SP.1 JOINT SP.1 DICHTUNG SP.1 JUNTA SP.157 F01100012 ING.M 6X1 7663-B 9SMNPB28 ZN SPHERE NIPPLE M6x17663-B ZB GRAISSEUR A BILLES M6X1 7663-B KUGELFETTBsCHSE M6X1 7663-B ZB ENGGRAS.M6X1 7663-B 9SMNPB2858 M43400702 >SUPPORTO CUSC.OSCILLANTE H42 BEARING SUPPORT SUPPORT ROULEMENT LAGERHALTER SOPORTE COJINETE59 M43400608 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO

TAV. PK01DGR. RULLO PACKER / PACKER ROLLER UNIT

30 cod. F07021022

TAV. SK01D


31cod. F07021022

TAV. SK01D

1 M43413445 ROTORE RULLO SK.500 SPIROLLER ROTOR D.500 1300 ROTOR SPIROPACKER D.500 1300 SPIROPACKERWALZE D.500 1300 ROTOR SPIROPACKER D.500 13002 M43415445 ROTORE RULLO SPK D=500 1500A SPIROLLER ROTOR D.500 1500 ROTOR SPIROPACKER D.500 1500 SPIROPACKERWALZE D.500 1500 ROTOR SPIROPACKER D.500 15003 M43418445 ROTORE RULLO SK.500 SPIROLLER ROTOR D.500 1800 ROTOR SPIROPACKER D.500 1800 SPIROPACKERWALZE D.500 1800 ROTOR SPIROPACKER D.500 18004 M43420445 ROTORE RULLO SK.500 SPIROLLER ROTOR D.500 2000A ROTOR SPIROPACKER D.500 2000A SPIROPACKERWALZE D.500 2000A ROTOR SPIROPACKER D.500 2000A5 M43423445 ROTORE RULLO SK.500 SPIROLLER ROTOR D.500 2300 ROTOR SPIROPACKER D.500 2300 SPIROPACKERWALZE D.500 2300 ROTOR SPIROPACKER D.500 23006 M43425445 ROTORE RULLO SK.500 2500A SK ROLLER ROTOR 500 2500A ROTOR ROULEAU SK 2500A SK WALZEROTOR 500 2500A ROTOR RODILLO SK 500 2500A7 M43430445 ROTORE RULLO SK.500 SK ROLLER ROTOR 500 3000 ROTOR ROULEAU SK 500 3000 SK WALZEROTOR 500 3000 ROTOR RODILLO SK 500 300015 F01010281 VITE M12X1,25X25 U5740 8.8 ZN BOLT M 12X1,25X25 VIS M 12X1,25X25 SCHRAUBE M 12X1,25X25 TORNILLO M 12X1,25X2516 F01010082 VITE M14X1,5 X50 U5738 8.8 ZN BOLT M 14X1,5X50 VIS M 14X1,5X50 SCHRAUBE M 14X1,5X50 TORNILLO M 14X1,5X5017 F01410088 ROS.M14 15X 28X2,5 U6592 ZN WAS.M14 15X 28X2,5 U6592 ZB RON.M14 15X 28X2,5 U6592 ZB SCH.M14 15X 28X2,5 U6592 ZB ARA.M14 15X 28X2,5 U6592 ZB18 M43400619 FIANCATA RULLO ROLLER SIDE PANEL COTE ROULEAU WALZENSEITENWAND FLANCO RODILLO19 M43400650 DISTANZIALE 5 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR20 M43400657 DISTANZIALE 10 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR21 F01220059 DADO M14X 1,5 D980 8 ZN NUT M14X 1,5 D980 8 ZB ECROU M14X 1,5 D980 8 ZB MUTTER M14X 1,5 D980 8 ZB TUERCA M14X 1,5 D980 8 ZB22 M43413654 TRAVE RASCHIARULLO 1000C SOIL SCRAPER FRAME 1300 CHASSIS ATT. DECROTTOIR 1300 ABSTREIFERRAHMEN 1300 TELAR ATAQUE RASQUETA 130023 M43415654 TRAVE RASCHIARULLO 1500A SOIL SCRAPER FRAME 1500 CHASSIS ATT. DECROTTOIR 1500 ABSTREIFERRAHMEN 1500 TELAR ATAQUE RASQUETA 150024 M43418654 TRAVE RASCHIARULLO 1500C SOIL SCRAPER FRAME 1800 CHASSIS ATT. DECROTTOIR 1800 ABSTREIFERRAHMEN 1800 TELAR ATAQUE RASQUETA 180025 M43420654 TRAVE RASCHIARULLO 2000A SOIL SCRAPER FRAME 2000 CHASSIS ATT. DECROTTOIR 2000 ABSTREIFERRAHMEN 2000 TELAR ATAQUE RASQUETA 200026 M43423654 TRAVE RASCHIARULLO 2000C SOIL SCRAPER FRAME 2300 CHASSIS ATT. DECROTTOIR 2300 ABSTREIFERRAHMEN 2300 TELAR ATAQUE RASQUETA 230027 M43425654 TRAVE RASCHIARULLO 2500A SOIL SCRAPER FRAME 2500 CHASSIS ATT. DECROTTOIR 2500 ABSTREIFERRAHMEN 2500 TELAR ATAQUE RASQUETA 250028 M43430654 TRAVE RASCHIARULLO 3000A SOIL SCRAPER FRAME 3000 CHASSIS ATT. DECROTTOIR 3000 ABSTREIFERRAHMEN 3000 TELAR ATAQUE RASQUETA 300029 M43400649 DISTANZIALE 2 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR30 M43400467 COMP.SUPP.CUSC.OSCIL.H42 X RIC COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.31 M43400607 COMP.SUPP.CUSC.OSCIL.H42 COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.32 F01010288 VITE M12X1,25X35 U5740 8.8 ZN BOLT M12X1,25X35 U5740 8.8 ZN VIS M12X1,25X35 U5740 8.8 ZN SCHR.M12X1,25X35 U5740 8.8 ZN TORN.M12X1,25X35 U5740 8.8 ZN33 F01480123 ROS.G 12,5X22,9X 4 EX.C70 ZN WASHER M12 ZGP EXTRA P. RONDELLE M12 ZGP EXTRA P. UNTERLEGSCHEIBE M12 ZGP EXTRA ARANDELA M12 ZGP EXTRA P.34 F01220047 DADO M12X1,25 D980 8 ZN NUT M12X1,25 D980 8 ZN ECROU M12X1,25 D980 8 ZN MUTTER M12X1,25 D980 8 ZN TUERCA M12X1,25 D980 8 ZN44 M43400704 GUARNIZIONE METALLICA H42 GASKET H42 JOINT H42 DICHTUNG H42 JUNTA45 F01100011 ING.M 6X1 7663-A 9SMNPB28 ZN GREASE NIPPLE M6X1 7663-A ZN GRAISS. A BILLE M6X1 7663A ZN SCHMIERBUECHE M6X1 7663-A ZN ENGRAS. DE ESFERAS M6X1 7663-A46 M23400439 FLANGIA SUPP. RULLO OSC. H. 42 SUPPORT FLANGE H.42 SUPPORT H.42 HALTER H.42 SOPORTE H.4247 F02050168 ANELLO E. DE 40X1,75 U7435 C70 SEEGER RING 40X1,75 U7435 C70 BAGUE SEEGER 40X1,75 U7435 C70 SEEGERRING 40X1,75 U7435 C70 ANIL.SEEGER 40X1,75 U7435 C7048 M48000307 ANELLO RINF.40X50X1,5 C70 STIFFENER RING 40X50X1,5 C70 BAGUE DE RENFORCEM. 40X50X1,5 SEEGER RING 40X50X1,5 C70 ANILLO REFUERZO 40X50X1,549 F04010184 CUSC.D40 D80 BOMB.18 6208 2RS1 BEARING D40 D80 BOMB.18 6208 ROULEMENT D40 D80 BOMB.18 6208 LAGER D40 D80 BOMB.18 6208 2RS COJINETE D40 D80 BOMB.18 620850 M38100990 GUARNIZIONE ELASTICA GASKET JOINT DICHTUNG JUNTA51 F01220034 DADO M10X1,25 D980 8 ZN NUT M10X1,25 D980 8 ZB ECRO.M10X1,25 D980 8 ZB MUTT.M10X1,25 D980 8 ZB TUER.M10X1,25 D980 8 ZB52 M23400438 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO53 M43400707 FLANGIA SPESSORE INNER FLANGE FLASQUE INTERIEUR INNENFLANSCH BRIDA INTERNA54 F01010244 VITE M10X1,25X25 U5740 8.8 ZN BOLT M10X1,25X25 U5740 8.8 ZN VIS M 10X1,25X25 SCHRAUBE M 10X1,25X25 TORNILLO M 10X1,25X2555 M43400651 DISTANZIALE D190 D74 L5 SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR56 M43400610 GUARN. METALLICA SP.1 SEMINAT. METALIC GASKET SP.1 JOINT SP.1 DICHTUNG SP.1 JUNTA SP.157 F01100012 ING.M 6X1 7663-B 9SMNPB28 ZN SPHERE NIPPLE M6x17663-B ZB GRAISSEUR A BILLES M6X1 7663-B KUGELFETTBsCHSE M6X1 7663-B ZB ENGGRAS.M6X1 7663-B 9SMNPB2858 M43400702 >SUPPORTO CUSC.OSCILLANTE H42 BEARING SUPPORT SUPPORT ROULEMENT LAGERHALTER SOPORTE COJINETE59 M43400608 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO

GR. RULLO SPIROPACKER / SPIRAL ROLLER UNIT

32 cod. F07021022

TAV. SP01D


33cod. F07021022

TAV. SP01D

1 M23413700 COMP.ROT.RUL.SPUNT.500 1000C SPIKE ROLLER ROTOR D500 1300 ROTOR ROULEAU DENTS D500 1300 ZINKENWALZEROTOR D500 1300 ROTOR RODIL.DIENTES D500 13002 M23415700 COMP.ROT.RUL.SPUNT.500 1500A SPIKE ROLLER ROTOR D500 1500 ROTOR ROULEAU DENTS D500 1500 ZINKENWALZEROTOR D500 1500 ROTOR RODIL.DIENTES D500 15003 M23418700 COMP.ROT.RUL.SPUNT.500 1500C SPIKE ROLLER ROTOR D500 1500C ROTOR ROULEAU DENTS D500 1500 ZINKENWALZEROTOR D500 1500C ROTOR RODIL.DIENTES D500 1500C4 M23420700 COMP.ROT.RUL.SPUNT.500 2000A SPIKE ROLLER ROTOR D500 2000A ROTOR ROULEAU DENTS D500 2000A ZINKENWALZEROTOR D500 2000A ROTOR RODIL.DIENTES D500 2000A5 M23423700 COMP.ROT.RUL.SPUNT.500 2000C SPIKE ROLLER ROTOR D500 2000C ROTOR ROULEAU DENTS D500 2000C ZINKENWALZEROTOR D500 2000C ROTOR RODIL.DIENTES D500 2000C6 M23425700 COMP.ROT.RUL.SPUNT.500 2500A SPIKE ROLLER ROTOR D500 2500A ROTOR ROULEAU DENTS D500 2500A ZINKENWALZEROTOR D500 2500A ROTOR RODIL.DIENTES D500 2500A7 M23430700 COMP.ROT.RUL.SPUNT.500 3000A SPIKE ROLLER ROTOR D500 3000A ROTOR ROULEAU DENTS D500 3000A ZINKENWALZEROTOR D500 3000A ROTOR RODIL.DIENTES D500 3000A15 F01010281 VITE M12X1,25X25 U5740 8.8 ZN BOLT M 12X1,25X25 VIS M 12X1,25X25 SCHRAUBE M 12X1,25X25 TORNILLO M 12X1,25X2516 F01010082 VITE M14X1,5 X50 U5738 8.8 ZN BOLT M 14X1,5X50 VIS M 14X1,5X50 SCHRAUBE M 14X1,5X50 TORNILLO M 14X1,5X5017 F01410088 ROS.M14 15X 28X2,5 U6592 ZN WAS.M14 15X 28X2,5 U6592 ZB RON.M14 15X 28X2,5 U6592 ZB SCH.M14 15X 28X2,5 U6592 ZB ARA.M14 15X 28X2,5 U6592 ZB18 M43400619 FIANCATA RULLO ROLLER SIDE PANEL COTE ROULEAU WALZENSEITENWAND FLANCO RODILLO19 M43400650 DISTANZIALE 5 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR20 M43400657 DISTANZIALE 10 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR21 F01220059 DADO M14X 1,5 D980 8 ZN NUT M14X 1,5 D980 8 ZB ECROU M14X 1,5 D980 8 ZB MUTTER M14X 1,5 D980 8 ZB TUERCA M14X 1,5 D980 8 ZB22 M43413647 TRAVE POST.RULLO SP500 1000C SOIL SCRAPER FRAME SP500 1300 CHASSIS ATT.DECROT SP500 1300 ABSTREIFERRAHMEN SP500 1300 TELAR ATAQ.RASQ SP500 130023 M43415647 TRAVE POST.RULLO SP500 1500A SOIL SCRAPER FRAME SP500 1500 CHASSIS ATT.DECROT SP500 1500 ABSTREIFERRAHMEN SP500 1500 TELAR ATAQ.RASQ SP500 150024 M43418647 TRAVE POST.RULLO SP500 1500C SOIL SCRAPER FRAME SP500 1800 CHASSIS ATT.DECROT SP500 1800 ABSTREIFERRAHMEN SP500 1800 TELAR ATAQ.RASQ SP500 180025 M43420647 TRAVE POST.RULLO SP500 2000A SOIL SCRAPER FRAME SP500 2000 CHASSIS ATT.DECROT SP500 2000 ABSTREIFERRAHMEN SP500 2000 TELAR ATAQ.RASQ SP500 200026 M43423647 TRAVE POST.RULLO SP500 2000C SOIL SCRAPER FRAME SP500 2300 CHASSIS ATT.DECROT SP500 2300 ABSTREIFERRAHMEN SP500 2300 TELAR ATAQ.RASQ SP500 230027 M43425647 TRAVE POST.RULLO SP500 2500A SOIL SCRAPER FRAME SP500 2500 CHASSIS ATT.DECROT SP500 2500 ABSTREIFERRAHMEN SP500 2500 TELAR ATAQ.RASQ SP500 250028 M43430647 TRAVE POST.RULLO SP500 3000A SOIL SCRAPER FRAME SP500 3000 CHASSIS ATT.DECROT SP500 3000 ABSTREIFERRAHMEN SP500 3000 TELAR ATAQ.RASQ SP500 300029 M43400649 DISTANZIALE 2 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR30 M43400467 COMP.SUPP.CUSC.OSCIL.H42 X RIC COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.31 M43400607 COMP.SUPP.CUSC.OSCIL.H42 COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.32 F01010288 VITE M12X1,25X35 U5740 8.8 ZN BOLT M12X1,25X35 U5740 8.8 ZN VIS M12X1,25X35 U5740 8.8 ZN SCHR.M12X1,25X35 U5740 8.8 ZN TORN.M12X1,25X35 U5740 8.8 ZN33 F01480123 ROS.G 12,5X22,9X 4 EX.C70 ZN WASHER M12 ZGP EXTRA P. RONDELLE M12 ZGP EXTRA P. UNTERLEGSCHEIBE M12 ZGP EXTRA ARANDELA M12 ZGP EXTRA P.39 F01010291 VITE M12X1,25X40 U5740 8.8 ZN BOLT M12X1,25X40 U5740 8.8 ZN VIS M12X1,25X40 U5740 8.8 ZN SCHR.M12X1,25X40 U5740 8.8 ZN TORN. M12X1,25X40 U5740 8.8 ZN44 M43400704 GUARNIZIONE METALLICA H42 GASKET H42 JOINT H42 DICHTUNG H42 JUNTA45 F01100011 ING.M 6X1 7663-A 9SMNPB28 ZN GREASE NIPPLE M6X1 7663-A ZN GRAISS. A BILLE M6X1 7663A ZN SCHMIERBUECHE M6X1 7663-A ZN ENGRAS. DE ESFERAS M6X1 7663-A46 M23400439 FLANGIA SUPP. RULLO OSC. H. 42 SUPPORT FLANGE H.42 SUPPORT H.42 HALTER H.42 SOPORTE H.4247 F02050168 ANELLO E. DE 40X1,75 U7435 C70 SEEGER RING 40X1,75 U7435 C70 BAGUE SEEGER 40X1,75 U7435 C70 SEEGERRING 40X1,75 U7435 C70 ANIL.SEEGER 40X1,75 U7435 C7048 M48000307 ANELLO RINF.40X50X1,5 C70 STIFFENER RING 40X50X1,5 C70 BAGUE DE RENFORCEM. 40X50X1,5 SEEGER RING 40X50X1,5 C70 ANILLO REFUERZO 40X50X1,549 F04010184 CUSC.D40 D80 BOMB.18 6208 2RS1 BEARING D40 D80 BOMB.18 6208 ROULEMENT D40 D80 BOMB.18 6208 LAGER D40 D80 BOMB.18 6208 2RS COJINETE D40 D80 BOMB.18 620850 M38100990 GUARNIZIONE ELASTICA GASKET JOINT DICHTUNG JUNTA51 F01220034 DADO M10X1,25 D980 8 ZN NUT M10X1,25 D980 8 ZB ECRO.M10X1,25 D980 8 ZB MUTT.M10X1,25 D980 8 ZB TUER.M10X1,25 D980 8 ZB52 M23400438 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO53 M43400707 FLANGIA SPESSORE INNER FLANGE FLASQUE INTERIEUR INNENFLANSCH BRIDA INTERNA54 F01010244 VITE M10X1,25X25 U5740 8.8 ZN BOLT M10X1,25X25 U5740 8.8 ZN VIS M 10X1,25X25 SCHRAUBE M 10X1,25X25 TORNILLO M 10X1,25X2555 M43400651 DISTANZIALE D190 D74 L5 SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR56 M43400610 GUARN. METALLICA SP.1 SEMINAT. METALIC GASKET SP.1 JOINT SP.1 DICHTUNG SP.1 JUNTA SP.157 F01100012 ING.M 6X1 7663-B 9SMNPB28 ZN SPHERE NIPPLE M6x17663-B ZB GRAISSEUR A BILLES M6X1 7663-B KUGELFETTBsCHSE M6X1 7663-B ZB ENGGRAS.M6X1 7663-B 9SMNPB2858 M43400702 >SUPPORTO CUSC.OSCILLANTE H42 BEARING SUPPORT SUPPORT ROULEMENT LAGERHALTER SOPORTE COJINETE59 M43400608 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO

GR. RULLO SPUNTONI / SPIKE ROLLER UNIT

34 cod. F07021022

21 20 19

16 17 18 29 20 21

44 51 53 54 55

30

45 46 47 48 49 50 52 52 51 50 49 48 47 46 45 59* 58* 57*

17

16

33

15

18

33

15

Ø 5

00

33 35

4456*

3031* 51

55 54 53



STANDARD (SU ENTRAMBI I LATI) STANDARD (ON BOTH SIDES)

*SOLO PER COMBINAZIONE CON SEMINATRICE COMPAGNA *ONLY FOR COUPLING WITH SEED DRILL COMPAGNA

TAV. RI01D


35cod. F07021022

1 M43413721 ROTORE RULLO RISAIA 500 1000C ROLLER PADDY-FIELD 500 1300 ROULEAU POUR RIZIERE 500 1300 WALZE FUER REISFELD 500 1300 RODILLO PARA ARROZAL 500 13002 M43415721 ROTORE RULLO RISAIA 500 1500A ROLLER PADDY-FIELD 500 1500 ROULEAU POUR RIZIERE 500 1500 WALZE FUER REISFELD 500 1500 RODILLO PARA ARROZAL 500 15003 M43418721 ROTORE RULLO RISAIA 500 1500C ROLLER PADDY-FIELD 500 1500C ROULEAU POUR RIZIERE 500 1500C WALZE FUER REISFELD 500 1500C RODILLO PARA ARROZAL 500 1500C4 M43420721 ROTORE RULLO RISAIA 500 2000A ROLLER PADDY-FIELD 500 2000A ROULEAU POUR RIZIERE 500 2000A WALZE FUER REISFELD 500 2000A RODILLO PARA ARROZAL 500 2000A5 M43423721 ROTORE RULLO RISAIA 500 2000C ROLLER PADDY-FIELD 500 2000C ROULEAU POUR RIZIERE 500 2000C WALZE FUER REISFELD 500 2000C RODILLO PARA ARROZAL 500 2000C6 M43425721 ROTORE RULLO RISAIA 500 2500A ROLLER PADDY-FIELD 500 2500A ROULEAU POUR RIZIERE 500 2500A WALZE FUER REISFELD 500 2500A RODILLO PARA ARROZAL 500 2500A7 M43430721 ROTORE RULLO RISAIA 500 3000A ROLLER PADDY-FIELD 500 3000A ROULEAU POUR RIZIERE 500 3000A WALZE FUER REISFELD 500 3000A RODILLO PARA ARROZAL 500 3000A15 F01010281 VITE M12X1,25X25 U5740 8.8 ZN BOLT M 12X1,25X25 VIS M 12X1,25X25 SCHRAUBE M 12X1,25X25 TORNILLO M 12X1,25X2516 F01010082 VITE M14X1,5 X50 U5738 8.8 ZN BOLT M 14X1,5X50 VIS M 14X1,5X50 SCHRAUBE M 14X1,5X50 TORNILLO M 14X1,5X5017 F01410088 ROS.M14 15X 28X2,5 U6592 ZN WAS.M14 15X 28X2,5 U6592 ZB RON.M14 15X 28X2,5 U6592 ZB SCH.M14 15X 28X2,5 U6592 ZB ARA.M14 15X 28X2,5 U6592 ZB18 M43400619 FIANCATA RULLO ROLLER SIDE PANEL COTE ROULEAU WALZENSEITENWAND FLANCO RODILLO19 M43400650 DISTANZIALE 5 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR20 M43400657 DISTANZIALE 10 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR21 F01220059 DADO M14X 1,5 D980 8 ZN NUT M14X 1,5 D980 8 ZB ECROU M14X 1,5 D980 8 ZB MUTTER M14X 1,5 D980 8 ZB TUERCA M14X 1,5 D980 8 ZB22 M43413647 TRAVE POST.RULLO SP500 1000C SOIL SCRAPER FRAME SP500 1300 CHASSIS ATT.DECROT SP500 1300 ABSTREIFERRAHMEN SP500 1300 TELAR ATAQ.RASQ SP500 130023 M43415647 TRAVE POST.RULLO SP500 1500A SOIL SCRAPER FRAME SP500 1500 CHASSIS ATT.DECROT SP500 1500 ABSTREIFERRAHMEN SP500 1500 TELAR ATAQ.RASQ SP500 150024 M43418647 TRAVE POST.RULLO SP500 1500C SOIL SCRAPER FRAME SP500 1800 CHASSIS ATT.DECROT SP500 1800 ABSTREIFERRAHMEN SP500 1800 TELAR ATAQ.RASQ SP500 180025 M43420647 TRAVE POST.RULLO SP500 2000A SOIL SCRAPER FRAME SP500 2000 CHASSIS ATT.DECROT SP500 2000 ABSTREIFERRAHMEN SP500 2000 TELAR ATAQ.RASQ SP500 200026 M43423647 TRAVE POST.RULLO SP500 2000C SOIL SCRAPER FRAME SP500 2300 CHASSIS ATT.DECROT SP500 2300 ABSTREIFERRAHMEN SP500 2300 TELAR ATAQ.RASQ SP500 230027 M43425647 TRAVE POST.RULLO SP500 2500A SOIL SCRAPER FRAME SP500 2500 CHASSIS ATT.DECROT SP500 2500 ABSTREIFERRAHMEN SP500 2500 TELAR ATAQ.RASQ SP500 250028 M43430647 TRAVE POST.RULLO SP500 3000A SOIL SCRAPER FRAME SP500 3000 CHASSIS ATT.DECROT SP500 3000 ABSTREIFERRAHMEN SP500 3000 TELAR ATAQ.RASQ SP500 300029 M43400649 DISTANZIALE 2 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR30 M43400467 COMP.SUPP.CUSC.OSCIL.H42 X RIC COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.31 M43400607 COMP.SUPP.CUSC.OSCIL.H42 COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.33 F01480123 ROS.G 12,5X22,9X 4 EX.C70 ZN WASHER M12 ZGP EXTRA P. RONDELLE M12 ZGP EXTRA P. UNTERLEGSCHEIBE M12 ZGP EXTRA ARANDELA M12 ZGP EXTRA P.35 F01010291 VITE M12X1,25X40 U5740 8.8 ZN BOLT M12X1,25X40 U5740 8.8 ZN VIS M12X1,25X40 U5740 8.8 ZN SCHR.M12X1,25X40 U5740 8.8 ZN TORN. M12X1,25X40 U5740 8.8 ZN44 M43400704 GUARNIZIONE METALLICA H42 GASKET H42 JOINT H42 DICHTUNG H42 JUNTA45 F01100011 ING.M 6X1 7663-A 9SMNPB28 ZN GREASE NIPPLE M6X1 7663-A ZN GRAISS. A BILLE M6X1 7663A ZN SCHMIERBUECHE M6X1 7663-A ZN ENGRAS. DE ESFERAS M6X1 7663-A46 M23400439 FLANGIA SUPP. RULLO OSC. H. 42 SUPPORT FLANGE H.42 SUPPORT H.42 HALTER H.42 SOPORTE H.4247 F02050168 ANELLO E. DE 40X1,75 U7435 C70 SEEGER RING 40X1,75 U7435 C70 BAGUE SEEGER 40X1,75 U7435 C70 SEEGERRING 40X1,75 U7435 C70 ANIL.SEEGER 40X1,75 U7435 C7048 M48000307 ANELLO RINF.40X50X1,5 C70 STIFFENER RING 40X50X1,5 C70 BAGUE DE RENFORCEM. 40X50X1,5 SEEGER RING 40X50X1,5 C70 ANILLO REFUERZO 40X50X1,549 F04010184 CUSC.D40 D80 BOMB.18 6208 2RS1 BEARING D40 D80 BOMB.18 6208 ROULEMENT D40 D80 BOMB.18 6208 LAGER D40 D80 BOMB.18 6208 2RS COJINETE D40 D80 BOMB.18 620850 M38100990 GUARNIZIONE ELASTICA GASKET JOINT DICHTUNG JUNTA51 F01220034 DADO M10X1,25 D980 8 ZN NUT M10X1,25 D980 8 ZB ECRO.M10X1,25 D980 8 ZB MUTT.M10X1,25 D980 8 ZB TUER.M10X1,25 D980 8 ZB52 M23400438 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO53 M43400707 FLANGIA SPESSORE INNER FLANGE FLASQUE INTERIEUR INNENFLANSCH BRIDA INTERNA54 F01010244 VITE M10X1,25X25 U5740 8.8 ZN BOLT M10X1,25X25 U5740 8.8 ZN VIS M 10X1,25X25 SCHRAUBE M 10X1,25X25 TORNILLO M 10X1,25X2555 M43400651 DISTANZIALE D190 D74 L5 SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR56 M43400610 GUARN. METALLICA SP.1 SEMINAT. METALIC GASKET SP.1 JOINT SP.1 DICHTUNG SP.1 JUNTA SP.157 F01100012 ING.M 6X1 7663-B 9SMNPB28 ZN SPHERE NIPPLE M6x17663-B ZB GRAISSEUR A BILLES M6X1 7663-B KUGELFETTBsCHSE M6X1 7663-B ZB ENGGRAS.M6X1 7663-B 9SMNPB2858 M43400702 >SUPPORTO CUSC.OSCILLANTE H42 BEARING SUPPORT SUPPORT ROULEMENT LAGERHALTER SOPORTE COJINETE59 M43400608 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO

TAV. RI01DGR.RULLO RISAIA / RICE ROLLER UNIT

36 cod. F07021022

TAV. FL01D


37cod. F07021022

TAV. FL01D

1 M23413722 ROTORE*RULLO FL.500 1000C CRUMBLER ROLLER ROTOR 1300 ROTOR ROULEAU A FLASQUES 1300 KRUMENPACKERWALZE ROTOR 1300 ROTOR DE RULO A BRIDE 13002 M23415722 ROTORE*RULLO FL.500 1500A CRUMBLER ROLLER ROTOR 1500 ROTOR ROULEAU A FLASQUES 1500 KRUMENPACKERWALZE ROTOR 1500 ROTOR DE RULO A BRIDE 15003 M23418722 ROTORE*RULLO FL.500 1800A CRUMBLER ROLLER ROTOR 1800A ROTOR ROULEAU A FLASQUES 1800A KRUMENPACKERWALZE ROTOR 1800A ROTOR DE RULO A BRIDE 1800A4 M23420722 ROTORE*RULLO FL.500 2000A CRUMBLER ROLLER ROTOR 2000A ROTOR ROULEAU A FLASQUES 2000A KRUMENPACKERWALZE ROTOR 2000A ROTOR DE RULO A BRIDE 2000A5 M23423722 ROTORE*RULLO FL.500 2000C CRUMBLER ROLLER ROTOR 2000C ROTOR ROULEAU A FLASQUES 2000C KRUMENPACKERWALZE ROTOR 2000C ROTOR DE RULO A BRIDE 2000C6 M23425722 ROTORE*RULLO FL.500 2500A CRUMBLER ROLLER ROTOR 500 ROTOR ROULEAU A FLASQUES 500 KRUMENPACKERWALZE ROTOR 500 ROTOR DE RULO A BRIDE 5007 M23430722 ROTORE*RULLO FL.500 3000A CRUMBLER ROLLER ROTOR 500 ROTOR ROULEAU A FLASQUES 500 KRUMENPACKERWALZE ROTOR 500 ROTOR DE RULO A BRIDE 50015 F01010281 VITE M12X1,25X25 U5740 8.8 ZN BOLT M 12X1,25X25 VIS M 12X1,25X25 SCHRAUBE M 12X1,25X25 TORNILLO M 12X1,25X2516 F01010082 VITE M14X1,5 X50 U5738 8.8 ZN BOLT M 14X1,5X50 VIS M 14X1,5X50 SCHRAUBE M 14X1,5X50 TORNILLO M 14X1,5X5017 F01410088 ROS.M14 15X 28X2,5 U6592 ZN WAS.M14 15X 28X2,5 U6592 ZB RON.M14 15X 28X2,5 U6592 ZB SCH.M14 15X 28X2,5 U6592 ZB ARA.M14 15X 28X2,5 U6592 ZB18 M43400619 FIANCATA RULLO ROLLER SIDE PANEL COTE ROULEAU WALZENSEITENWAND FLANCO RODILLO19 M43400650 DISTANZIALE 5 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR20 M43400657 DISTANZIALE 10 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR21 F01220059 DADO M14X 1,5 D980 8 ZN NUT M14X 1,5 D980 8 ZB ECROU M14X 1,5 D980 8 ZB MUTTER M14X 1,5 D980 8 ZB TUERCA M14X 1,5 D980 8 ZB22 M43413656 TRAVE POST.RULLO FL500 SOIL SCRAPER FRAME FL500 1300 CHASSIS ATT.DECROT FL500 1300 ABSTREIFERRAH FL 500 1300 TELAR ATAQ.RASQ FL500 130023 M43415656 TRAVE POST.RULLO FL500 SOIL SCRAPER FRAME FL500 1500 CHASSIS ATT.DECROT FL500 1500 ABSTREIFERRAH FL 500 1500 TELAR ATAQ.RASQ FL500 150024 M43418656 TRAVE POST.RULLO FL500 SOIL SCRAPER FRAME FL500 1800 CHASSIS ATT.DECROT FL500 1800 ABSTREIFERRAH FL 500 1800 TELAR ATAQ.RASQ FL500 180025 M43420656 TRAVE POST.RULLO FL500 SOIL SCRAPER FRAME FL500 2000 CHASSIS ATT.DECROT FL500 2000 ABSTREIFERRAH FL 500 2000 TELAR ATAQ.RASQ FL500 200026 M43423656 TRAVE POST.RULLO FL500 SOIL SCRAPER FRAME FL500 2300 CHASSIS ATT.DECROT FL500 2300 ABSTREIFERRAH FL 500 2300 TELAR ATAQ.RASQ FL500 230027 M43425656 TRAVE POST.RULLO FL500 SOIL SCRAPER FRAME FL500 2500 CHASSIS ATT.DECROT FL500 2500 ABSTREIFERRAH FL 500 2500 TELAR ATAQ.RASQ FL500 250028 M43430656 TRAVE POST.RULLO FL500 SOIL SCRAPER FRAME FL500 3000 CHASSIS ATT.DECROT FL500 3000 ABSTREIFERRAH FL 500 3000 TELAR ATAQ.RASQ FL500 300029 M43400649 DISTANZIALE 2 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR30 M43400467 COMP.SUPP.CUSC.OSCIL.H42 X RIC COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.31 M43400607 COMP.SUPP.CUSC.OSCIL.H42 COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.32 F01010288 VITE M12X1,25X35 U5740 8.8 ZN BOLT M12X1,25X35 U5740 8.8 ZN VIS M12X1,25X35 U5740 8.8 ZN SCHR.M12X1,25X35 U5740 8.8 ZN TORN.M12X1,25X35 U5740 8.8 ZN33 F01480123 ROS.G 12,5X22,9X 4 EX.C70 ZN WASHER M12 ZGP EXTRA P. RONDELLE M12 ZGP EXTRA P. UNTERLEGSCHEIBE M12 ZGP EXTRA ARANDELA M12 ZGP EXTRA P.35 F01060208 VITE M10X1,5X25 U5731 8.8 ZN BOLT M10X1,5X25 VIS M10X1,5X25 SCHRAUBE M10X1,5X25 TORNILLO M10X1,5X2536 M43400711 PIASTRA RASCHIAT.LAT.PER FL SIDE SCRAPER PLATE FL PLAT DU DECROT.ROUL.FL ABSTREIFER PLATTE FL PLACA RASQUETA FL37 F01410064 ROS.M10 10,5X 20X 2 U6592 ZN WASHER M10 10,5X20X2 U6592 ZN RONDELL.M10 10,5X20X2 U6592 ZN SCHEIBE M10 10,5X20X2 U6592 ZN ARAND. M10 10,5X20X2 U6592 ZN38 F01220033 DADO M10X 1,5 D980 8 ZN NUT M10X 1,5 D980 8 ZN ECROU M10X 1,5 D980 8 ZN MUTTER M10X 1,5 D980 8 ZN TUERCA M10X 1,5 D980 8 ZN39 M23400788 PIASTRA RASCHIATERRA PER FL SCRETCHING PLATE FL PLAT DU DECROT.ROUL.FL ABSTREIFER PLATTE FL PLACA RASQUETA FL44 M43400704 GUARNIZIONE METALLICA H42 GASKET H42 JOINT H42 DICHTUNG H42 JUNTA45 F01100011 ING.M 6X1 7663-A 9SMNPB28 ZN GREASE NIPPLE M6X1 7663-A ZN GRAISS. A BILLE M6X1 7663A ZN SCHMIERBUECHE M6X1 7663-A ZN ENGRAS. DE ESFERAS M6X1 7663-A46 M23400439 FLANGIA SUPP. RULLO OSC. H. 42 SUPPORT FLANGE H.42 SUPPORT H.42 HALTER H.42 SOPORTE H.4247 F02050168 ANELLO E. DE 40X1,75 U7435 C70 SEEGER RING 40X1,75 U7435 C70 BAGUE SEEGER 40X1,75 U7435 C70 SEEGERRING 40X1,75 U7435 C70 ANIL.SEEGER 40X1,75 U7435 C7048 M48000307 ANELLO RINF.40X50X1,5 C70 STIFFENER RING 40X50X1,5 C70 BAGUE DE RENFORCEM. 40X50X1,5 SEEGER RING 40X50X1,5 C70 ANILLO REFUERZO 40X50X1,549 F04010184 CUSC.D40 D80 BOMB.18 6208 2RS1 BEARING D40 D80 BOMB.18 6208 ROULEMENT D40 D80 BOMB.18 6208 LAGER D40 D80 BOMB.18 6208 2RS COJINETE D40 D80 BOMB.18 620850 M38100990 GUARNIZIONE ELASTICA GASKET JOINT DICHTUNG JUNTA51 F01220034 DADO M10X1,25 D980 8 ZN NUT M10X1,25 D980 8 ZB ECRO.M10X1,25 D980 8 ZB MUTT.M10X1,25 D980 8 ZB TUER.M10X1,25 D980 8 ZB52 M23400438 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO53 M43400707 FLANGIA SPESSORE INNER FLANGE FLASQUE INTERIEUR INNENFLANSCH BRIDA INTERNA54 F01010244 VITE M10X1,25X25 U5740 8.8 ZN BOLT M10X1,25X25 U5740 8.8 ZN VIS M 10X1,25X25 SCHRAUBE M 10X1,25X25 TORNILLO M 10X1,25X2555 M43400651 DISTANZIALE D190 D74 L5 SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR56 M43400610 GUARN. METALLICA SP.1 SEMINAT. METALIC GASKET SP.1 JOINT SP.1 DICHTUNG SP.1 JUNTA SP.157 F01100012 ING.M 6X1 7663-B 9SMNPB28 ZN SPHERE NIPPLE M6x17663-B ZB GRAISSEUR A BILLES M6X1 7663-B KUGELFETTBsCHSE M6X1 7663-B ZB ENGGRAS.M6X1 7663-B 9SMNPB2858 M43400702 >SUPPORTO CUSC.OSCILLANTE H42 BEARING SUPPORT SUPPORT ROULEMENT LAGERHALTER SOPORTE COJINETE59 M43400608 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO

GR.RULLO FLANGIATO / LIGHT DUTY PACKER ROLLER

38 cod. F07021022

TAV. LI01D


39cod. F07021022

1 M23413725 ROTORE RULLO PK500 1000C-LISCI SMOOTH ROLLER 1000C ROTOR ROULEAU LIS 1000C ROTOR WALZE LIS-IO 1000C ROTOR RODILLO LISO 1000C2 M23415725 ROTORE RULLO PK500 1500A-LISCI SMOOTH ROLLER 1500A ROTOR ROULEAU LIS 1500A GLATTWALZE 1500A ROTOR RODILLO LISO 1500A3 M23418725 ROTORE RULLO PK500 1500C-LISCI SMOOTH ROLLER 1500C ROTOR ROULEAU LIS 1500C GLATTWALZE 1500C ROTOR RODILLO LISO 1500C4 M23420725 ROTORE RULLO PK500 2000A-LISC. SMOOTH ROLLER 2000A ROTOR ROULEAU LIS 2000A GLATTWALZE 2000A ROTOR RODILLO LISO 2000A5 M23423725 ROTORE RULLO PK500 2000C-LISCI SMOOTH ROLLER 2000C ROTOR ROULEAU LIS 2000C GLATTWALZE 2000C ROTOR RODILLO LISO 2000C6 M23425725 ROTORE RULLO PK500 2500A-LISCI SMOOTH ROLLER 2500A ROTOR ROULEAU LIS 2500A GLATTWALZE 2500A ROTOR RODILLO LISO 2500A7 M23430725 ROTORE*RULLO LI.355 3000A SMOOTH ROLLER 3000A ROTOR ROULEAU LIS 3000A GLATTWALZE 3000A ROTOR RODILLO LISO 3000A15 F01010281 VITE M12X1,25X25 U5740 8.8 ZN BOLT M 12X1,25X25 VIS M 12X1,25X25 SCHRAUBE M 12X1,25X25 TORNILLO M 12X1,25X2516 F01010082 VITE M14X1,5 X50 U5738 8.8 ZN BOLT M 14X1,5X50 VIS M 14X1,5X50 SCHRAUBE M 14X1,5X50 TORNILLO M 14X1,5X5017 F01410088 ROS.M14 15X 28X2,5 U6592 ZN WAS.M14 15X 28X2,5 U6592 ZB RON.M14 15X 28X2,5 U6592 ZB SCH.M14 15X 28X2,5 U6592 ZB ARA.M14 15X 28X2,5 U6592 ZB18 M43400619 FIANCATA RULLO ROLLER SIDE PANEL COTE ROULEAU WALZENSEITENWAND FLANCO RODILLO19 M43400650 DISTANZIALE 5 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR20 M43400657 DISTANZIALE 10 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR21 F01220059 DADO M14X 1,5 D980 8 ZN NUT M14X 1,5 D980 8 ZB ECROU M14X 1,5 D980 8 ZB MUTTER M14X 1,5 D980 8 ZB TUERCA M14X 1,5 D980 8 ZB22 M43413667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50023 M43415667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50024 M43418667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50025 M43420667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50026 M43423667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50027 M43425667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50028 M43430667 TRAVE POST.RULLO PK450-500 SOIL SCRAPER FRAME PK450-500 CHASSIS ATT.DECROTT.PK450-500 ABSTREIFERRAHMEN PK450-500 TELAR ATAQ.RASQUETA PK450-50029 M43400649 DISTANZIALE 2 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR30 M43400467 COMP.SUPP.CUSC.OSCIL.H42 X RIC COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.31 M43400607 COMP.SUPP.CUSC.OSCIL.H42 COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.32 F01010288 VITE M12X1,25X35 U5740 8.8 ZN BOLT M12X1,25X35 U5740 8.8 ZN VIS M12X1,25X35 U5740 8.8 ZN SCHR.M12X1,25X35 U5740 8.8 ZN TORN.M12X1,25X35 U5740 8.8 ZN33 F01480123 ROS.G 12,5X22,9X 4 EX.C70 ZN WASHER M12 ZGP EXTRA P. RONDELLE M12 ZGP EXTRA P. UNTERLEGSCHEIBE M12 ZGP EXTRA ARANDELA M12 ZGP EXTRA P.35 F01060208 VITE M10X1,5X25 U5731 8.8 ZN BOLT M10X1,5X25 VIS M10X1,5X25 SCHRAUBE M10X1,5X25 TORNILLO M10X1,5X2536 M23400788 PIASTRA RASCHIATERRA PER FL SCRETCHING PLATE FL PLAT DU DECROT.ROUL.FL ABSTREIFER PLATTE FL PLACA RASQUETA FL37 F01410064 ROS.M10 10,5X 20X 2 U6592 ZN WASHER M10 10,5X20X2 U6592 ZN RONDELL.M10 10,5X20X2 U6592 ZN SCHEIBE M10 10,5X20X2 U6592 ZN ARAND. M10 10,5X20X2 U6592 ZN38 F01220033 DADO M10X 1,5 D980 8 ZN NUT M10X 1,5 D980 8 ZN ECROU M10X 1,5 D980 8 ZN MUTTER M10X 1,5 D980 8 ZN TUERCA M10X 1,5 D980 8 ZN44 M43400704 GUARNIZIONE METALLICA H42 GASKET H42 JOINT H42 DICHTUNG H42 JUNTA45 F01100011 ING.M 6X1 7663-A 9SMNPB28 ZN GREASE NIPPLE M6X1 7663-A ZN GRAISS. A BILLE M6X1 7663A ZN SCHMIERBUECHE M6X1 7663-A ZN ENGRAS. DE ESFERAS M6X1 7663-A46 M23400439 FLANGIA SUPP. RULLO OSC. H. 42 SUPPORT FLANGE H.42 SUPPORT H.42 HALTER H.42 SOPORTE H.4247 F02050168 ANELLO E. DE 40X1,75 U7435 C70 SEEGER RING 40X1,75 U7435 C70 BAGUE SEEGER 40X1,75 U7435 C70 SEEGERRING 40X1,75 U7435 C70 ANIL.SEEGER 40X1,75 U7435 C7048 M48000307 ANELLO RINF.40X50X1,5 C70 STIFFENER RING 40X50X1,5 C70 BAGUE DE RENFORCEM. 40X50X1,5 SEEGER RING 40X50X1,5 C70 ANILLO REFUERZO 40X50X1,549 F04010184 CUSC.D40 D80 BOMB.18 6208 2RS1 BEARING D40 D80 BOMB.18 6208 ROULEMENT D40 D80 BOMB.18 6208 LAGER D40 D80 BOMB.18 6208 2RS COJINETE D40 D80 BOMB.18 620850 M38100990 GUARNIZIONE ELASTICA GASKET JOINT DICHTUNG JUNTA51 F01220034 DADO M10X1,25 D980 8 ZN NUT M10X1,25 D980 8 ZB ECRO.M10X1,25 D980 8 ZB MUTT.M10X1,25 D980 8 ZB TUER.M10X1,25 D980 8 ZB52 M23400438 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO53 M43400707 FLANGIA SPESSORE INNER FLANGE FLASQUE INTERIEUR INNENFLANSCH BRIDA INTERNA54 F01010244 VITE M10X1,25X25 U5740 8.8 ZN BOLT M10X1,25X25 U5740 8.8 ZN VIS M 10X1,25X25 SCHRAUBE M 10X1,25X25 TORNILLO M 10X1,25X2555 M43400651 DISTANZIALE D190 D74 L5 SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR56 M43400610 GUARN. METALLICA SP.1 SEMINAT. METALIC GASKET SP.1 JOINT SP.1 DICHTUNG SP.1 JUNTA SP.157 F01100012 ING.M 6X1 7663-B 9SMNPB28 ZN SPHERE NIPPLE M6x17663-B ZB GRAISSEUR A BILLES M6X1 7663-B KUGELFETTBsCHSE M6X1 7663-B ZB ENGGRAS.M6X1 7663-B 9SMNPB2858 M43400702 >SUPPORTO CUSC.OSCILLANTE H42 BEARING SUPPORT SUPPORT ROULEMENT LAGERHALTER SOPORTE COJINETE59 M43400608 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO

TAV. LI01D GR.RULLO LISCIO / SMOOTH ROLLER UNIT

40 cod. F07021022

TAV.RET01D


41cod. F07021022

TAV.RET01D

1 M43413756 ROTORE RULLO AD ANELLI GREEN ROLLER ROTOR ROTOR ROULEAU GREEN GREENWALZE ROTOR ROTOR RODILLO GREEN2 M43415756 ROTORE RULLO AD ANELLI GREEN ROLLER ROTOR ROTOR ROULEAU GREEN GREENWALZE ROTOR ROTOR RODILLO GREEN3 M43418756 ROTORE RULLO AD ANELLI GREEN ROLLER ROTOR ROTOR ROULEAU GREEN GREENWALZE ROTOR ROTOR RODILLO GREEN4 M43420756 ROTORE RULLO AD ANELLI GREEN ROLLER ROTOR ROTOR ROULEAU GREEN GREENWALZE ROTOR ROTOR RODILLO GREEN5 M43423756 ROTORE RULLO AD ANELLI GREEN ROLLER ROTOR ROTOR ROULEAU GREEN GREENWALZE ROTOR ROTOR RODILLO GREEN6 M43425756 ROTORE RULLO AD ANELLI GREEN ROLLER ROTOR ROTOR ROULEAU GREEN GREENWALZE ROTOR ROTOR RODILLO GREEN7 M43430756 ROTORE RULLO AD ANELLI GREEN ROLLER ROTOR ROTOR ROULEAU GREEN GREENWALZE ROTOR ROTOR RODILLO GREEN15 F01010281 VITE M12X1,25X25 U5740 8.8 ZN BOLT M 12X1,25X25 VIS M 12X1,25X25 SCHRAUBE M 12X1,25X25 TORNILLO M 12X1,25X2516 F01010082 VITE M14X1,5 X50 U5738 8.8 ZN BOLT M 14X1,5X50 VIS M 14X1,5X50 SCHRAUBE M 14X1,5X50 TORNILLO M 14X1,5X5017 F01410088 ROS.M14 15X 28X2,5 U6592 ZN WAS.M14 15X 28X2,5 U6592 ZB RON.M14 15X 28X2,5 U6592 ZB SCH.M14 15X 28X2,5 U6592 ZB ARA.M14 15X 28X2,5 U6592 ZB18 M43400619 FIANCATA RULLO ROLLER SIDE PANEL COTE ROULEAU WALZENSEITENWAND FLANCO RODILLO19 M43400650 DISTANZIALE 5 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR20 M43400657 DISTANZIALE 10 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR21 F01220059 DADO M14X 1,5 D980 8 ZN NUT M14X 1,5 D980 8 ZB ECROU M14X 1,5 D980 8 ZB MUTTER M14X 1,5 D980 8 ZB TUERCA M14X 1,5 D980 8 ZB22 M43413658 TRAVE RASCHIARULLO 1300 SOIL SCRAPER FRAME 1300 CHASSIS ATT. DECROTTOIR 1300 ABSTREIFERRAHMEN 1300 TELAR ATAQUE RASQUETA 130023 M43415658 TRAVE RASCHIARULLO 1500 SOIL SCRAPER FRAME 1500 CHASSIS ATT. DECROTTOIR 1500 ABSTREIFERRAHMEN 1500 TELAR ATAQUE RASQUETA 150024 M43418658 TRAVE RASCHIARULLO 1800 SOIL SCRAPER FRAME 1800 CHASSIS ATT. DECROTTOIR 1800 ABSTREIFERRAHMEN 1800 TELAR ATAQUE RASQUETA 180025 M43420658 TRAVE RASCHIARULLO 2000 SOIL SCRAPER FRAME 2000 CHASSIS ATT. DECROTTOIR 2000 ABSTREIFERRAHMEN 2000 TELAR ATAQUE RASQUETA 200026 M43423658 TRAVE RASCHIARULLO 2300 SOIL SCRAPER FRAME 2300 CHASSIS ATT. DECROTTOIR 2300 ABSTREIFERRAHMEN 2300 TELAR ATAQUE RASQUETA 230027 M43425658 TRAVE RASCHIARULLO 2500 SOIL SCRAPER FRAME 2500 CHASSIS ATT. DECROTTOIR 2500 ABSTREIFERRAHMEN 2500 TELAR ATAQUE RASQUETA 250028 M43430658 TRAVE RASCHIARULLO 3000 SOIL SCRAPER FRAME 3000 CHASSIS ATT. DECROTTOIR 3000 ABSTREIFERRAHMEN 3000 TELAR ATAQUE RASQUETA 300029 M43400649 DISTANZIALE 2 MM SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR30 M43400467 COMP.SUPP.CUSC.OSCIL.H42 X RIC COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.31 M43400607 COMP.SUPP.CUSC.OSCIL.H42 COMPLETE BEARING SUPPORT H42 SUPPORT ROULEMENT H.42 RIC. LAGERHALTERUNG H.42 P.GETRIEBE SOPORTE COJINETE H.42 RIC.32 F01010288 VITE M12X1,25X35 U5740 8.8 ZN BOLT M12X1,25X35 U5740 8.8 ZN VIS M12X1,25X35 U5740 8.8 ZN SCHR.M12X1,25X35 U5740 8.8 ZN TORN.M12X1,25X35 U5740 8.8 ZN33 F01480123 ROS.G 12,5X22,9X 4 EX.C70 ZN WASHER M12 ZGP EXTRA P. RONDELLE M12 ZGP EXTRA P. UNTERLEGSCHEIBE M12 ZGP EXTRA ARANDELA M12 ZGP EXTRA P.34 F01220047 DADO M12X1,25 D980 8 ZN NUT M12X1,25 D980 8 ZN ECROU M12X1,25 D980 8 ZN MUTTER M12X1,25 D980 8 ZN TUERCA M12X1,25 D980 8 ZN44 M43400704 GUARNIZIONE METALLICA H42 GASKET H42 JOINT H42 DICHTUNG H42 JUNTA45 F01100011 ING.M 6X1 7663-A 9SMNPB28 ZN GREASE NIPPLE M6X1 7663-A ZN GRAISS. A BILLE M6X1 7663A ZN SCHMIERBUECHE M6X1 7663-A ZN ENGRAS. DE ESFERAS M6X1 7663-A46 M23400439 FLANGIA SUPP. RULLO OSC. H. 42 SUPPORT FLANGE H.42 SUPPORT H.42 HALTER H.42 SOPORTE H.4247 F02050168 ANELLO E. DE 40X1,75 U7435 C70 SEEGER RING 40X1,75 U7435 C70 BAGUE SEEGER 40X1,75 U7435 C70 SEEGERRING 40X1,75 U7435 C70 ANIL.SEEGER 40X1,75 U7435 C7048 M48000307 ANELLO RINF.40X50X1,5 C70 STIFFENER RING 40X50X1,5 C70 BAGUE DE RENFORCEM. 40X50X1,5 SEEGER RING 40X50X1,5 C70 ANILLO REFUERZO 40X50X1,549 F04010184 CUSC.D40 D80 BOMB.18 6208 2RS1 BEARING D40 D80 BOMB.18 6208 ROULEMENT D40 D80 BOMB.18 6208 LAGER D40 D80 BOMB.18 6208 2RS COJINETE D40 D80 BOMB.18 620850 M38100990 GUARNIZIONE ELASTICA GASKET JOINT DICHTUNG JUNTA51 F01220034 DADO M10X1,25 D980 8 ZN NUT M10X1,25 D980 8 ZB ECRO.M10X1,25 D980 8 ZB MUTT.M10X1,25 D980 8 ZB TUER.M10X1,25 D980 8 ZB52 M23400438 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO53 M43400707 FLANGIA SPESSORE INNER FLANGE FLASQUE INTERIEUR INNENFLANSCH BRIDA INTERNA54 F01010244 VITE M10X1,25X25 U5740 8.8 ZN BOLT M10X1,25X25 U5740 8.8 ZN VIS M 10X1,25X25 SCHRAUBE M 10X1,25X25 TORNILLO M 10X1,25X2555 M43400651 DISTANZIALE D190 D74 L5 SPACER ENTRETOISE DISTANZSTUECK DISTANCIADOR56 M43400610 GUARN. METALLICA SP.1 SEMINAT. METALIC GASKET SP.1 JOINT SP.1 DICHTUNG SP.1 JUNTA SP.157 F01100012 ING.M 6X1 7663-B 9SMNPB28 ZN SPHERE NIPPLE M6x17663-B ZB GRAISSEUR A BILLES M6X1 7663-B KUGELFETTBsCHSE M6X1 7663-B ZB ENGGRAS.M6X1 7663-B 9SMNPB2858 M43400702 >SUPPORTO CUSC.OSCILLANTE H42 BEARING SUPPORT SUPPORT ROULEMENT LAGERHALTER SOPORTE COJINETE59 M43400608 MOZZO CUSCINETTO OSCILLANTE BEARING HUB MOYEU NABE CUBO

GR.RULLO RETE / GREEN ROLLER UNIT

42 cod. F07021022

WALTERSCHEIDCARD.01

1

2

3

4

5 2

6 F08011587 L = 660 X -- DS - DL - DLV

STANDARD STANDARD

L


43cod. F07021022

CARD.01

A F08011587 CARD.GKN FRIZ. BULL.TRANCIO UNIVERSAL P T O SHAFT FOR DS ARBRE A CARDAN POUR DS GELENKWELLE DS ARBOL CARDANICO PARA DS1 F08010459 FORCELLA COMP.PULS.-1’3/8 Z6 LINKAGE FORK-1’3/8 Z6 FOURCHE ATTELAGE-1’3/8 Z6 GABELSTUECK-1’3/8 Z6 HORQUILLA ATAQUE-1’3/8 Z62 F08010686 CROCIERA COMPLETA SPIDER ASSY CROISIERE COMPL. SERIE GELENKKREUZ KOMPL. SERIE CRUCETA COMPL. SERIE3 F08010721 FORCELLA + TUBO ESTERNO FORK WITH EXTERNAL PIPE FOURCHE AVEC TUBE EXTERIEUR GABELST. + AUSSENROHR HORQUILLA + TUBO EXTERNO4 F08010851 PROTEZIONE COMPLETA PROTECTION ASSY PROTECTION COMPL. KOMPL. SCHUTZ PROTECCION COMPL.5 F08010533 FORCELLA CON TUBO INTERNO FORK WITH INTERNAL PIPE FOURCHE AVEC TUBE INTERIEUR GABELST. + INNENROHR HORQUILLA + TUBO INTERNO6 F08010592 FORCELLA LIMIT.A BUL.GKN SHEAR PIN LIMITEUR SCHERSTIFT LIMITADOR

ALBERO CARD. STANDARD / STANDARD CARDAN SHAFT

44 cod. F07021022

CARD.02

DELFINO 1300 DELFINO 1300 1500 1500 1800 1800

OPTIONAL OPTIONAL


45cod. F07021022

CARD.02

A F08011590 CARD.GKN 181064 UNIVERSAL P T O SHAFT L-850 CARDAN W2400 L=850 GELENKWELLE ARBOL CARDANICO1 F08000003 133836 35.83.30 FORCEL.13/8 Z6 LINKAGE FORK 1” 3/8 Z6 FOURCHE ATTELAGE 1” 3/8 Z6 GABELSTUECK 1” 3/8 Z6 HORQUILLA ATAQUE 1” 3/8 Z62 F08010683 CROCIERA COMPLETA W2300 SPIDER ASSY CROISIERE COMPL. GELENKKREUZ KOMPL. CRUCETA COMPL.3 F08010814 FORCELLA + TUBO PROFILATO INT. YOKE WITH INTERNAL PIPE FOURCHE AVEC TUBE INTERIEUR GABELST. + INNENROHR HORQUILLA + TUBO INTERNO4 F08010851 PROTEZIONE COMPLETA PROTECTION ASSY PROTECTION COMPL. KOMPL. SCHUTZ PROTECCION COMPL.5 F08010544 FORCELLA CON TUBO ESTERNO SALD YOKE WITH EXTER. WELDING PIPE FOURCHE AVEC TUBE EXTERIEUR GABELST. + AUSSENROHR HORQUILLA + TUBO EXTERNO6 F08011020 FRIZIONE COMPL.GKN CLUTCH ASSY EMBRAYAGE COMPL. KOMPL. KUPPLUNG FRICCION COMPL.7 F08010824 PROTEZIONE FRICTION PROTECTION COVER CALOTTE COUVRE EMBRAYAGE CALOTTE COUVRE EMBRAYAGE TAPA EMBRAGUE8 F01200073 DADO M12X1,25 U5587 6S ZN NUT M12X1,25 U5587 6S ZN ECROU M12X1,25 U5587 6S ZN MUTTER M12X1,25 U5587 6S ZN TUERCA M12X1,25 U5587 6S ZN9 F01410076 ROS.M12 13X 24X2,5 U6592 ZN WASHER D12 U6592 ZN RONDELLE D12 U6592 ZN SCHEIBE D12 U6592 ZN ARANDELA D12 U6592 ZN10 F08011222 660153 MOLLA DI PRESSIONE PRESSURE SPRING RESSORT DE PRESSION DRUCKFEDER MUELLE DE PRESION11 F08010347 FORCELLA FLANGIATA FLANGE YOKE FOURCHE AVEC FLASQUE GABELSTUECK M. FLANSCH HORQUILLA BRIDA12 F01020164 VITE M12X1,75X70 U5737 8.8 ZN BOLT M12X1,75X70 U5737 8.8 ZN VIS M12X1,75X70 U5737 8.8 ZN SCHR. M12X1,75X70 U5737 8.8 ZN TORN. M12X1,75X70 U5737 8.8 ZN13 F08010909 DISCO D’ATTRITO FRICTION DISK DISQUE DE FROTTEMENT KUPPLUNGSCHEIBE DISCO FROTAMIENTO14 F08011058 MOZZO SPLINED HUB MOYEU CANNELE KEILNABE CUBO ACANALADO15 F08010972 DISCO DI PRESSIONE PRESSURE DISC DISQUE DE PRESSION DRUCKSCHEIBE DISCO DE PRESION16 F01010065 VITE M12X1,25X110 5738 8.8 ZN BOLT M 12X1,25X110 VIS M 12X1,25X110 SCHRAUBE M 12X1,25X110 TORNILLO M 12X1,25X110

ALBERO CARD. OPTIONAL / OPTIONAL CARDAN SHAFT

46 cod. F07021022

CARD.03

DELFINO 2000 DELFINO 2000 2300 2300 2500 2500 3000 3000

OPTIONAL OPTIONAL


47cod. F07021022

CARD.03

A F08011587 CARD.GKN FRIZ. BULL.TRANCIO UNIVERSAL P T O SHAFT FOR DS ARBRE A CARDAN POUR DS GELENKWELLE DS ARBOL CARDANICO PARA DS1 F08010459 FORCELLA COMP.PULS.-1’3/8 Z6 LINKAGE FORK-1’3/8 Z6 FOURCHE ATTELAGE-1’3/8 Z6 GABELSTUECK-1’3/8 Z6 HORQUILLA ATAQUE-1’3/8 Z62 F08010686 CROCIERA COMPLETA SPIDER ASSY CROISIERE COMPL. SERIE GELENKKREUZ KOMPL. SERIE CRUCETA COMPL. SERIE3 F08010721 FORCELLA + TUBO ESTERNO FORK WITH EXTERNAL PIPE FOURCHE AVEC TUBE EXTERIEUR GABELST. + AUSSENROHR HORQUILLA + TUBO EXTERNO4 F08010851 PROTEZIONE COMPLETA PROTECTION ASSY PROTECTION COMPL. KOMPL. SCHUTZ PROTECCION COMPL.5 F08010533 FORCELLA CON TUBO INTERNO FORK WITH INTERNAL PIPE FOURCHE AVEC TUBE INTERIEUR GABELST. + INNENROHR HORQUILLA + TUBO INTERNO6 F08010592 FORCELLA LIMIT.A BUL.GKN SHEAR PIN LIMITEUR SCHERSTIFT LIMITADOR

ALBERO CARD. OPTIONAL / OPTIONAL CARDAN SHAFT

USATE SEMPRE RICAMBI ORIGINALIALWAYS USE ORIGINAL SPARE PARTS

IMMER DIE ORIGINAL-ERSATZTEILE VERWENDENEMPLOYEZ TOUJOURS LES PIECES DE RECHANGE ORIGINALES

UTILIZAR SIEMPRE REPUESTOS ORIGINALES

Servizio Assistenza Tecnica - After Sales Service+39 049 9289960+39 049 9289836

Servizio Ricambi - Spare Parts Service+39 049 9289888

DEALER:

000 МАСКИО-ГАСПАРДО РУССИЯ04130, Россия,Волгоградская область, г. Волжский, ул. Пушкина, 117 «б». Тел.: +7 8443 203100 факс: +7 8443 203101 e-mail: [email protected]

MASCHIO-GASPARDO ROMANIA S.R.L.Strada Înfrátirii, F.N.315100 Chisineu-Cris (Arad) -RomâniaTel. +40 257 307030Fax +40 257 [email protected]

MASCHIO DEUTSCHLAND GMBHÄußere Nürmberger Straße 5D - 91177 Thalmässing - DeutschlandTel. +49 (0) 9173 79000 Fax +49 (0) 9173 [email protected]

MASCHIO FRANCE Sarl1 rue Denis Papin ZAF - 45240 La Ferte St. AubinFranceTel. +33 (0) 2.38.64.12.12 Fax +33 (0) [email protected]

MASCHIO IBERICA S.L.MASCHIO-GASPARDO POLANDMASCHIO-GASPARDO UCRAINAGASPARDO-MASCHIO TURCHIAMASCHIO-GASPARDO CINAMASCHIO-GASPARDO INDIAMASCHIO-GASPARDO KOREA

MASCHIO GASPARDO NORTH AMERICA Inc.112 3rd Avenue East DeWitt – IA 52742Ph. +1 563 6596400 Fax +1 563 [email protected]

MASCHIO GASPARDO SpARegistered Offi ce and Production PlantVia Marcello, 73 - 35011 Campodarsego (Padova) - ItalyTel. +39 049 9289810Fax +39 049 [email protected]

MASCHIO GASPARDO SpAProduction Plant Via Mussons, 7 - 33075 Morsano al Tagliamento (PN) - ItalyTel. +39 0434 695410 Fax +39 0434 [email protected]

DELFINO DL DELFINO SUPER - Maschio Deutschland GmbH · 2015. 11. 18. · DELFINO DL DELFINO SUPER...

Documents

Transcript of DELFINO DL DELFINO SUPER - Maschio Deutschland GmbH · 2015. 11. 18. · DELFINO DL DELFINO SUPER...