Defecto Aislante Capo

Connection offline

Customer statement / workshop findings White stains (mould) on the soundproofing lining inside the bonnet.

Technical background In particularly rainy countries, rainwater may enter and dampen the soundproofing lining on the inside of the bonnet. This causes the appearance of white stains (mould).

Figure 1: Image of the claimed incident

Production change - - -

Measure Should the customer complain, once the problem has been confirmed the following repair procedure must be followed:

Replace the affected lining.

Remove the bonnet half-moon moulding causing the water to penetrate as indicated in the instructions in the Technical Repair Manual.

Obtain a moulding waterproofing kit from the Genuine parts department. The genuine SEAT part reference for the kit is 1P0 867 845.

The kit is made up of three sections of self-adhesive foam:

Type 1 in Figure 4: There is 1 long section of foam.

Technical product information Transaction No.: 2025865/1

7017, 6644, 1P, Stains on the insulating lining of the bonnet Release date: 29-Mar-2011

of 3Technical product information 2025865/1

27/10/2011http://hst.cpn.vwg/hst2/svl/F3F2E3_2C8/B4B2_166/B5B9B...

Figure 2: 1 piece of A: 15 millimetres, B: 10 millimetres, and C: 1520 millimetres.

Type 2 in Figure 4: There are 2 short sections of foam.

Figure 3: 2 pieces of A: 15 millimetres, B: 10 millimetres, and C: 170 millimetres.

Attach the self-adhesive foam sections in the manner shown in Figure 4:

Figure 4: Image of the location of the waterproofing kit components.

Fit the moulding as indicated in the Technical Repair Manual.

Ensure the moulding is properly flush.

Warranty accounting instructions TA no. / Anomaly / Manufacturer: 6644 / 0050 / …



1) The times indicated are only applicable to this TPI. When submitting the warranty application, please include the number of the TPI used to streamline the process.

Note:

The work times published in this TPI are for the current TUs at the date of publication. The times units (TU) may vary slightly as a result of a subsequent update of the catalogue of work positions. The times currently in force according to the work position catalogue are valid, except for the work positions entered manually (... 99).

No. of work position Description of work position Time Units (TU)

92 25 20 00 2 windscreen wiper arms, remove and fit 30 1)

66 44 19 50 Wind deflector lining, remove and fit 20 1)

6644 51 99 Wind deflector lining, seal 10 1)



Defecto Aislante Capo

Documents

Transcript of Defecto Aislante Capo