1

DECORATIVEWISHING WELL

ITEM #0309398

MODEL #SD08108

Français p. 6

Español p. 11

Serial Number Purchase Date

Questions, problems, missing parts? Before returning to your retailer, call our customerservice department at 1-800-643-0067, 8 a.m.- 8 p.m., EST, Monday - Friday.

ATTACH YOUR RECEIPT HERE

XXXXXX Lowes.com/gardentreasures

PACKAGE CONTENTS

2

Lowes.com/gardentreasures

PART DESCRIPTION QUANTITY A Roof 1 B Support 2

C Connecting Pole 21

E Rotating Shaft 1 F Bucket with Rope 1

D Bottom

A

B B

C C

D

E

F

HARDWARE CONTENTS (shown actual size)

3

PREPARATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

CAUTION • Place the wishing well in an area away from pets and children. Do not allow children to climb, sit

Estimated Assembly Time: 15 minutes

Tools Required for Assembly (included): Hex Key Wrench, M6 Wrench.

or play on the wishing well.

SAFETY INFORMATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Lowes.com/gardentreasures

M6 x 30 mmInner Hex Bolt

Qty. 12

M6 Ball

Qty. 8

Hex Key

Qty. 1

AA DDCCBB

Head Nut

Wrench

EE

M6 Washer

Qty. 8

M6

Qty. 1

Wrench

(not shownactual size)

(not shownactual size)

4

ASSEMBLY INSTRUCTIONS

Hardware Used

Hardware Used

1. Connect support (B) and roof (A) with bolts (AA)using wrench (DD). Fully tighten.

2. Join support (B) and connecting pole (C) with bolts (AA), washers (CC) and nuts (BB) usingwrench (EE). Fully tighten.Note: Keep the hold and groove ends of theconnecting poles (C) facing upwards.

3. Attach connecting pole (C) and bottom (D) withbolts (AA), washers (CC) and nuts (BB) using wrench (DD). Fully tighten.

1

2

3

AA

B

Lowes.com/gardentreasures

DDDD

AA

A

BB

BB

CCC

AA

B

EE

BB

AA

C

DD AA

CC

EE

x 4M6 x 30 mmInner Hex Bolt

Hex Key Wrench

BB x 4M6 BallHead Nut

AA x 4M6 x 30 mmInner Hex Bolt

CC x 4M6 Washer

EE M6 Wrench

BB x 4M6 BallHead Nut

AA x 4M6 x 30 mmInner Hex Bolt

CC x 4M6 Washer

DD Hex Key Wrench

Hardware Used

5

ASSEMBLY INSTRUCTIONS

4. Insert rotating shaft (E) into the hole in connecting pole (C) and then slide the rope of bucket (F) onto the shaft (E). Finally, insert shaft (E) into groove of connecting pole (C).

4

CARE AND MAINTENANCE

To extend the life of your wishing well, cover it in bad weather.

WARRANTY

This limited warranty is extended to the original purchaser and applies to defects in material andworkmanship of your item provided the item is maintained with care and used only for personal, residential purposes. If you have any questions regarding the product, please call customer serviceat 1-800-643-0067, 8 a.m. - 8 p.m., EST, Monday - Friday.The manufacturer warrants this item to be free from defects in material and workmanship for a periodof one (1) year. The manufacturer will not cover transportation or delivery costs or compensate theindividual or any outside party for assembling or disassembling the product. This warranty gives youspecific legal rights and you may also have other rights that vary from state to state.

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-800-643-0067, 8 a.m.- 8 p.m.,EST, Monday - Friday.

P

Printed in ChinaGarden Treasures® is a registered trademark

of LF, LLC. All rights reserved.

Lowes.com/gardentreasures

BE

C CF

PART DESCRIPTION PART # AA M6 x 30 mm Inner Hex Bolt 12 BB 8 CC 8 DD 1 EE 1

AA

BB

CC

DD

EEM6 WasherHex Key Wrench

M6 Ball Head

M6 Wrench

0309398.Hongtai.GT.English P1.pdf0309398.Hongtai.GT.English P2.pdf0309398.Hongtai.GT.English P3.pdf0309398.Hongtai.GT.English P4.pdf0309398.Hongtai.GT.English P5.pdf