DEC 1013 ENGINEERING SCIENCEs
description
Transcript of DEC 1013 ENGINEERING SCIENCEs
![Page 2: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/2.jpg)
What you will learn:
• Distance and displacement• Speed and velocity• Acceleration• Distance vs. time graph: interpret slope as speed• Velocity vs. time graph: interpret slope as
acceleration; area under graph as distance moved• Rotational kinematics• Angular velocity and angular acceleration
![Page 3: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/3.jpg)
Distance & Displacement
• Distance is the actual length measured of a particular path taken.
• Displacement is the length and direction of a straight line drawn from the start to finish.
![Page 4: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/4.jpg)
Cont..• Distance and displacement are two quantities which may
seem to mean the same thing, yet they have distinctly different meanings and definitions.
• Distance (d) is a scalar quantity which refers to "how far an object has moved" during its motion.
• Displacement (d) is a vector quantity which refers to "how far an object is from its original position"; it is the object's change in position.
![Page 5: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/5.jpg)
Displacement
![Page 6: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/6.jpg)
Speed & Velocity
![Page 7: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/7.jpg)
• Illustration of distinction between velocity and speed
![Page 8: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/8.jpg)
![Page 9: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/9.jpg)
Acceleration
![Page 10: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/10.jpg)
Acceleration is the rate of change of velocity.
Example 2-1: Average acceleration.
A car accelerates along a straight road from rest to 90 km/h in 5.0 s. What is the magnitude of its average acceleration?
![Page 11: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/11.jpg)
Motion along x-axis
![Page 12: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/12.jpg)
Interpreting Graph
• Distance vs time graph
![Page 13: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/13.jpg)
Interpreting graph• Velocity vs time graph
![Page 14: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/14.jpg)
Unit Conversion
![Page 15: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/15.jpg)
![Page 16: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/16.jpg)
Rotational kinematics
![Page 17: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/17.jpg)
Rotational kinematics
![Page 18: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/18.jpg)
Angular motion
• Angular velocity
![Page 19: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/19.jpg)
Angular motion
• Angular acceleration
![Page 20: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/20.jpg)
Angular motion
• ROTATIONAL MOTION UNDER CONSTANT ANGULAR ACCELERATION
![Page 21: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/21.jpg)
Problem solving
![Page 22: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/22.jpg)
Problem solving
![Page 23: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/23.jpg)
Summary of Chapter 2 (p.1)• Kinematics is the description of how objects
move with respect to a defined reference frame.
• Displacement is the change in position of an object.
• Average speed is the distance traveled divided by the time it took; average velocity is the displacement divided by the time.
• Instantaneous velocity is the average velocity in the limit as the time becomes infinitesimally short.
![Page 24: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/24.jpg)
Summary of Chapter 2 (p.2)
• Average acceleration is the change in velocity divided by the time.
• Instantaneous acceleration is the average acceleration in the limit as the time interval becomes infinitesimally small.
• The equations of motion for constant acceleration are given in the text; there are four, each one of which requires a different set of quantities.
![Page 25: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/25.jpg)
Topic 2.6/2.7
Uniform Circular Motion
![Page 26: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/26.jpg)
Ө = angular position (angle)
ω = angular velocity (rate at which an angle changes)
α = angular acceleration
Easy ways of relating angular kinematics to rotational kinematics:s = r Ө v = r ω a = r α
Also, v =
![Page 27: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/27.jpg)
Linear Kinematics:
x = ½at2 + v0t + x0
v = at + v0
v2 = 2a∆x + v02
Look similar? They are.
Rotational Kinematics:
θ = ½αt2 + ω0t + θ 0
ω = αt + ω0
ω2 = 2α∆ θ + ω02
![Page 28: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/28.jpg)
From the results of the lab, we can find that Fc =
![Page 29: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/29.jpg)
Whenever an object is moving in a circle, the forces acting on it cause the object to move in a circle.
As such, the net force is the centripetal force.
ΣF = Fc
![Page 30: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/30.jpg)
Example
A 1500kg car drives over the top of a hill at a constant 20m/s. If the radius of curvature for the hill is 60m,
1) Sketch a free-body diagram of this situation.
2) Solve for the centripetal force on the car.
3) What is the magnitude of the normal force on the car?
![Page 31: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/31.jpg)
2) Fc =
=
3) ΣF = Fc = Fg – FN
FN = mg – FC
FN = 14,700N - 10,000N FN = 4,700N
We know the centripetal force isdownward because the center of the circle is below the car. The only forces acting on the carare gravity and the normal force.The mg is greater than the normalforce, and the arrows show it.
![Page 32: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/32.jpg)
Torqueτ = r x F
Or for those who may not know cross-products,
τ = rF sin (Ө)
τ (tau) stands for torque. It is equal to the radius from the fulcrum times the force times the sine of the angle between the radius and the torque.
Units for torque are Nm
Clockwise is negative and counterclockwise is positive (just like angles)
![Page 33: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/33.jpg)
Torque Example
You apply a force of 20N to a 10cm long wrench at a30 degree angle. Solve for the torque.
τ = rF sin (Ө) τ = (0.1m)(20N) sin (60) τ = 1.73 N*m
![Page 34: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/34.jpg)
Torque and Force
∑F = Fnet
For a non-accelerating system, ∑F = Fnet = 0
At the same time, ∑ τ = τ net
For a non-rotating system, ∑ τ = τ net = 0
![Page 35: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/35.jpg)
Example
A meter stick has a fulcrum placed at the 50cm mark. An object that weighs 20N is hung from it 20cm from the center.
What force would you have to apply on the other side of the meter stick 30cm from the fulcrum to keep the meter stick from rotating?
∑ τ = τ person - τweight = 0 F(0.3m)-(0.2m)(20N)=0
F=13.3N
![Page 36: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/36.jpg)
Rotational DynamicsThe equation describing most situations in this section is:
∑ τ = I α
The sum of torques is equal to the moment of inertia times angular acceleration.
![Page 37: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/37.jpg)
Moment of Inertia
Moment of inertia of an object tells you how difficult it is to make the object rotate.
In general, I = mr2
That is true for each individual mass, but an entire system of masses can be more complicated.
![Page 38: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/38.jpg)
Some commonly used moments of inertia are:
I = mr2 for a point mass I = ½ mr2 for a discI = 1/3 mr2 for a rod rotating around its end
![Page 39: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/39.jpg)
You exert a 60N force at the end of a 3m long rod. The rod has a mass of 20kg. Assuming the rod is rotating about its end (the circle in the picture),
a) Calculate the moment of inertia of the rod.
b) Calculate the net torque on the rod.
c) What is the angular acceleration of the rod?
![Page 40: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/40.jpg)
a) This is a rod rotating about its end, so I = 1/3 mr2 . = 1/3(20kg)(3m) 2
= 60 kg*m2
b) τ = rF sin (Ө) = (3m)(60N)sin(90)=180Nm
c) ∑ τ = I α180Nm = 60(kgm2) α α = 30 rad/s2
![Page 41: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/41.jpg)
Angular Momentum
Angular momentum is another quantity that is conserved in physics.
Always:L = I ω
For each individual point, L = mrv. Depending on the shape of the entire rotating object, there may be a coefficient.
![Page 42: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/42.jpg)
ExampleA ball is tied to a pole with a string that is 2m long and is orbiting the pole. The initial speed of the ball is 6m/s. What is the distance of the ball from the pole when its speed is 20m/s?
L1 = L2
I1 ω1 = I2 ω2 or mr1v1 = mr2v2
mr12(v1/r1) = mr2
2(v2/r2)r1v1 = r2v2
(2m)(6m/s) = r2 (20m/s)r2 = 0.6m/s
![Page 43: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/43.jpg)
Linear Kinematics:
x = ½at2 + v0t + x0
v = at + v0
v2 = 2a∆x + v02
∑ F = map = mvEk = ½ mv2
Rotational Kinematics:
θ = ½αt2 + ω0t + θ 0
ω = αt + ω0
ω2 = 2α∆ θ + ω02
∑ τ = I αL = I ωEk = ½ I ω 2
![Page 44: DEC 1013 ENGINEERING SCIENCEs](https://reader034.fdocuments.net/reader034/viewer/2022051317/56816014550346895dcf167b/html5/thumbnails/44.jpg)
THANK YOU