RILESA ApSSupplier of drillmachine and

Handling equipment to The woodworking Industri

VAKMIX 3000

www.rilesa.dkrilesa@rilesa.dk

Dealer:

We also manufacture:

Ejderstedt & Fröding ABBox 43, Häljarydsvägen 2 - 560 27 Tenhult

Tel: +46 (0) 3618 6050 - Fax: +46 (0) 3618 8187www.ejderstedts.se

VAKMIX 6000

Vlg 1524

VAKMIX STAFET VAKMIX 6000P

VLGD 1524

VAKMIX STAFET

UNI-X

WinProfi

Vakmix 3000 stacking after a planer.Note! Handling of two pallets in the machine.

Working at the operation system is very simple.The operator shall only press on the function as required change and immediately comes there help from the function.If you e.g. have to change the length on subject comes there a little keyboard out.If the pallet have to be turned, press on the pallet and it will turn.

The stick magazines follow the stacker arm.

Vakmix 3000 handle the lay on of the intermediate layer, if this answer one's wishes.

Chain and roller conveyor is a naturally accessories, where automatic pallet shift is preferable.

Here the machine is stacking two pallets. After the first pallet is complete it automatically shifts to the other pallet. Also the machine can stack more pieces on the pallet at the same time.

At Rilesa is safety a pride of place.The machine is equipt with safety lattice.

In this picture it is possible to sort the material. Each different length can be sorted.

Vakmix 3000 supplied with two belt conveyors to handle longer lengths.

The separator for the material. The pieces can be run one by one to a planer for ex.. Each piece is sent directly out of the layer with help from a rotary brush.

Vakmix 3000 lamella stacker. Handling different lengths at the same time and automatic pallets shift.

Picking up the material on belt conveyor, gives careful handling.

Collecting the layer to be stacked.

The vacuum cups with flow vaves that automatically close when there is no material under the cup. When the pallets are exchanged, the yokesets itself to the new width.

With a suction mat rough sawn wood is handled efficiently. It can handle heavy loads even on an uneven surface.

Positive advantages:*. No damage to the material.*. Minimum changeover time.*. Can handle multiple pallets.*. Large capacity.*. Minimum maintenance and set up.

Vakmix 3000Vacuum stacker/destacker

Roller conveyor for empty pallet, is also a naturally equiptment for Vakmix 3000.

Subject on edge ex. Lamella is handle effective with a clamp system combined with a rough wood yoke.