DCP-T310 / DCP-T510W / DCP-T710W / MFC-T810W Quick Setup … · Ethernet (Network) cable (MFC-T810W...
2
NOTE • The Reference Guide for these models is available on the enclosed installation disc. • The illustrations in this Quick Setup Guide show the MFC-T810W. • Save all packing materials and the box in case you must ship your machine. • You must purchase the correct interface cable for the interface you want to use. A USB cable is included with some models. USB cable We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres long. Ethernet (Network) cable (MFC-T810W only) Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network. 2 Load paper in the paper tray For more information about paper handling and sizes, see the Reference Guide. 1 Unpack the machine and check the components The components included in the box may differ depending on your country. Remove the protective tape and film covering the machine and the ink tank cover. Connect the telephone line cord. Use the socket marked LINE. After turning the machine on, you may need to set your country or language (depending on your machine). If required, follow the steps on the LCD. Connect the power cord. The machine will power on automatically. NOTE If you are sharing one telephone line with an external telephone, connect it as shown below. a. Extension telephone b. External telephone Quick Setup Guide DCP-T310 / DCP-T510W / DCP-T710W / MFC-T810W Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure. 3 Connect the power cord 4 Select your country or language (Initial setup only) D00BTU001-02 ASA/SAF/GLF Version B Inbox Ink Bottles* • Black • Yellow • Cyan • Magenta * Inbox ink bottles contain the following yield of replacement bottles: - Black: approx. 95% yield - Others: approx. 90% yield uu Reference Guide: Supply Specifications Quick Setup Guide Product Safety Guide Power Cord USB Interface Cable (For some countries) Brother Installation Disc Telephone Line Cord (MFC-T810W only) Cleaning Kit (For some countries) 8 Select your language (if needed and only for certain models) 9 Connect the telephone line cord (MFC-T810W only) If you are not using your machine as a fax, go to 10 . The latest manuals are available at the Brother Solutions Center: support.brother.com/manuals Watch our FAQ videos for help with setting up your Brother machine. support.brother.com/videos 5 Set the date and time For DCP models: Press a, b , d or c to select the number, and then press OK to set the date and time. For MFC model: Follow the prompts displayed on the LCD to set the date and time. Pull the paper tray completely out of the machine. Open the output paper tray cover a. Fan the paper well and load it in the tray. Close the output paper tray cover, and then slowly push the tray completely into the machine. Adjust the paper guides. NOTE Pull out the paper support a, and unfold the paper support flap b so that the printed pages do not fall. 6 Fill the ink tanks with the inbox ink Check the ink bottle model name on the label. Incorrect ink may cause damage to the machine. BK (Dye) CMY BTD60BK BT5000CMY BT5001CMY BT5009CMY DO NOT USE BK (Pigment) BT6000BK BT6001BK BT6009BK Point the nozzle upward so that the ink does not spill, and then remove the nozzle from the ink tank. Remove the tip of the ink bottle. Insert the nozzle of the ink bottle firmly so that the ink does not spill. Fill the ink tank by gently squeezing the bottle as shown. Empty the entire bottle into the ink tank. When the machine has finished the initial cleaning process, follow the steps on the LCD to configure the machine settings. • Check print quality • Print the installation sheet 7 Machine settings Push down on the cap of the ink tank to close it tightly. Repeat step 6 for the three other ink tanks. Close the ink tank cover. The machine will prepare the ink tube system for printing. NOTE Refer to the sample below to check the print quality. None A Few About Half Many 1. For DCP models: a. Press Menu. b. Press a or b to select [Initial Setup], and then press OK. c. Press a or b to select [Local Language], and then press OK. For MFC model: Press Menu, 0, 0. 2. Press a or b to select your language, and then press OK. 3. Press Stop/Exit. Remove the cap and protective film from the ink bottle, and then replace the cap. NOTE Fasten the ink bottle cap tightly to avoid leakage. Open the ink tank cover a and pull the tab b downwards to open the cap of the ink tank. 1 2 IMPORTANT Secure Network Access Your machine’s default password is on the label on the back of the machine (preceded by "Pwd"). We strongly recommend you change it to protect your machine from unauthorised access. 1 2
Transcript of DCP-T310 / DCP-T510W / DCP-T710W / MFC-T810W Quick Setup … · Ethernet (Network) cable (MFC-T810W...
NOTE• TheReference Guideforthesemodelsisavailableontheenclosedinstallationdisc.
• TheillustrationsinthisQuick Setup GuideshowtheMFC-T810W.• Saveallpackingmaterialsandtheboxincaseyoumustshipyourmachine.
• You must purchase the correct interface cable for the interface you want to use. A USB cable is included with some models.
USB cableWerecommendusingaUSB2.0cable(TypeA/B)thatisnomorethan2metreslong.
Ethernet (Network) cable (MFC-T810W only)Useastraight-throughCategory5(orgreater)twisted-paircablefor10BASE-Tor100BASE-TXFastEthernetNetwork.
2 Load paper in the paper trayFormoreinformationaboutpaperhandlingandsizes,seetheReference Guide.
1 Unpack the machine and check the componentsThecomponentsincludedintheboxmaydifferdependingonyourcountry.Removetheprotectivetapeandfilmcoveringthemachineandtheinktankcover.
Connectthetelephonelinecord.UsethesocketmarkedLINE.
Afterturningthemachineon,youmayneedtosetyourcountryorlanguage(dependingonyourmachine).Ifrequired,followthestepsontheLCD.
Connectthepowercord.Themachinewillpoweronautomatically.
NOTEIfyouaresharingonetelephonelinewithanexternaltelephone,connectitasshownbelow.
a. Extensiontelephoneb. Externaltelephone
QuickSetupGuideDCP-T310 / DCP-T510W / DCP-T710W / MFC-T810W
ReadtheProduct Safety Guidefirst,thenreadthisQuick Setup Guideforthecorrectinstallationprocedure.
3 Connect the power cord
4 Select your country or language (Initial setup only)
D00BTU001-02ASA/SAF/GLFVersionB
Inbox Ink Bottles*•Black•Yellow•Cyan•Magenta*Inboxinkbottlescontainthefollowingyieldofreplacementbottles:
-Black:approx.95%yield-Others:approx.90%yielduu Reference Guide:
Supply Specifications
Quick Setup GuideProduct Safety Guide
Power Cord USB Interface Cable(For some countries)
Brother Installation Disc Telephone Line Cord (MFC-T810W only)
Cleaning Kit(For some countries)
8 Select your language (if needed and only for certain models)
9 Connect the telephone line cord (MFC-T810W only)Ifyouarenotusingyourmachineasafax,goto 10 .
ThelatestmanualsareavailableattheBrotherSolutionsCenter:support.brother.com/manuals
WatchourFAQvideosforhelpwithsettingupyourBrothermachine.support.brother.com/videos
5 Set the date and time
For DCP models:Pressa,b,dorctoselectthenumber,andthenpressOKtosetthedateandtime.For MFC model:FollowthepromptsdisplayedontheLCDtosetthedateandtime.
Pullthepapertraycompletelyoutofthemachine.
Opentheoutputpapertraycovera. Fanthepaperwellandloaditinthetray.
Closetheoutputpapertraycover,andthenslowlypushthetraycompletelyintothemachine.
Adjustthepaperguides.
NOTEPulloutthepapersupporta,andunfoldthepapersupportflapbsothattheprintedpagesdonotfall.
6 Fill the ink tanks with the inbox ink
Checktheinkbottlemodelnameonthelabel.Incorrectinkmaycausedamagetothemachine.
BK (Dye) CMY
BTD60BKBT5000CMYBT5001CMYBT5009CMY
DO NOT USEBK (Pigment)
BT6000BKBT6001BKBT6009BK
Pointthenozzleupwardsothattheinkdoesnotspill,andthenremovethenozzlefromtheinktank.
Removethetipoftheinkbottle.Insertthenozzleoftheinkbottlefirmlysothattheinkdoesnotspill.Filltheinktankbygentlysqueezingthebottleasshown.Emptytheentirebottleintotheinktank.
Whenthemachinehasfinishedtheinitialcleaningprocess,followthestepsontheLCDtoconfigurethemachinesettings.•Checkprintquality•Printtheinstallationsheet
7 Machine settings
Pushdownonthecapoftheinktanktocloseittightly.Repeatstep 6 forthethreeotherinktanks.
Closetheinktankcover.Themachinewillpreparetheinktubesystemforprinting.
NOTERefertothesamplebelowtochecktheprintquality.
None A Few About Half Many
1. For DCP models:a.PressMenu.b. Pressaorbtoselect[Initial Setup],andthenpressOK.c. Pressaorbtoselect[Local Language],andthenpressOK.For MFC model:PressMenu,0,0.
2. Pressaorbtoselectyourlanguage,andthenpressOK.
3. PressStop/Exit.
Removethecapandprotectivefilmfromtheinkbottle,andthenreplacethecap.
NOTEFastentheinkbottlecaptightlytoavoidleakage.
Opentheinktankcoveraandpullthetabbdownwardstoopenthecapoftheinktank.
1
2
IMPORTANT
Secure Network AccessYourmachine’sdefaultpasswordisonthelabelonthebackofthemachine(precededby"Pwd").Westronglyrecommendyouchangeittoprotectyourmachinefromunauthorisedaccess.
1
2
©2017BrotherIndustries,Ltd.Allrightsreserved.ForFAQs,Troubleshooting,andtodownloadsoftwareandmanuals,visitsupport.brother.com.Forproductspecifications,seetheOnline User’s Guide.
10 Select a device to connect to your machine
11 Connect your computer
12 Alternative wireless setup (DCP-T510W/DCP-T710W/MFC-T810W only)
13 Print or scan using your mobile device (DCP-T510W/DCP-T710W/MFC-T810W only)YourmobiledevicemustbeconnectedtothesamewirelessnetworkasyourBrothermachine.
D00BTU001-02
PuttheinstallationdiscintoyourCD/DVDdrive,ordownloadtheFullDriver&SoftwarePackageat:
ForWindows®:support.brother.com/windowsForMac:support.brother.com/mac
Ifyouareusingarecentlyreleasedoperatingsystemonyourcomputer,visittheabovewebsitesforupdateddriverandsoftwareinformation.
Follow the on-screen instructions and prompts.
ForWindows®:IftheBrotherscreendoesnotappearautomatically,gotoComputer(My Computer/This PC).Double-clicktheCD/DVD-ROMicon,andthendouble-clickstart.exe.
ForMac:Forfulldriverfunctionality,werecommendchoosingtheCUPS driverwhenaddingaprinter.
Ifyoucannotfindthisinformation,askyournetworkadministratororwirelessaccesspoint/routermanufacturer.
Ifsetupisnotsuccessful,restartyourBrothermachineandyourwirelessaccesspoint/router,andrepeat 12 .
FindyourSSID(NetworkName)andNetworkKey(Password)onyourwirelessaccesspoint/routerandwritetheminthetableprovidedbelow. SelecttheSSID(NetworkName)for
youraccesspoint/routerandentertheNetworkKey(Password).Formoreinformation,seeEnter Text on Your Brother MachineintheOnline User’s Guide.
Whenthewirelesssetupissuccessful,theLCDdisplays[Connected].
Goto 11 toinstallsoftware.
Goto 13 toinstallapps.
SSID (Network Name)
Network Key (Password)
Computer Mobile Device (DCP-T510W/DCP-T710W/MFC-T810W only)Goto 11 andfollowtheinstructions.
Goto 12 andfollowtheinstructions.
For Computer
For Mobile Device
Can’t Connect? Check the following:
Brotherregularlyupdatesfirmwaretoaddfeaturesandapplybugfixes.Tocheckforthelatestfirmware,visitsupport.brother.com/up4.
Evenifyoudonothaveawirelessaccesspoint/router,youcanconnectyourdeviceandyourmachinedirectly.Foradditionalwirelessnetworksupport,gotosupport.brother.com/wireless-support.
BrotherSupportCenterisamobileappthatprovidesthelatestsupportinformationforyourBrotherproduct.VisittheAppStoreorGooglePlay™todownload.
Wirelessnetwork(DCP-T510W/DCP-T710W/MFC-T810Wonly)
Wirednetwork(MFC-T810Wonly)
USBconnection
Restartyourwirelessaccesspoint/router(ifpossible). Ifstillnotsuccessful,goto 12 .
Disconnectthecable. Ifstillnotsuccessful,visitsupport.brother.comforFAQsandTroubleshooting.
Restartyourmachineandcomputer,andthengoto 11 .
AdditionalWirelessSupport:support.brother.com/wireless-support
Download
SSID:XXXXXXXNetworkkey:XXXX
Finished
AirPrintisavailableforallsupportediOSdevicesincludingiPhone,iPad,andiPodtouch.YoudonotneedtodownloadanysoftwaretouseAirPrint.Formoreinformation,seetheOnline User’s Guide.
DownloadandinstalltheMopria®PrintServiceappfromGooglePlay™usingyourAndroid™device.
Optional appsYoucanprintfromandscantoyourmobiledeviceusingvariousapps.Forinstructions,seetheOnline User’s Guide.
DownloadandinstallourfreeapplicationBrother iPrint&Scanfromamobileapplicationstore,suchastheAppStore,GooglePlay™,orMicrosoft®Storeusingyourmobiledevice.
1. PressMenu.
2. Pressaorbtoselect[Network],andthenpressOK.
3. Pressaorbtoselect[WLAN],andthenpressOK.
4. Pressaorbtoselect[Setup Wizard],andthenpressOK.
ForWiredNetworkConnection*andUSBConnection:Locatethecorrectport(basedonthecableyouareusing)insidethemachineasshown.
*MFC-T810Wonly
NOTEWerecommendconfiguringwirelesssettingsfromyourcomputer.
