DC-drive programmable hoist

of 1 /1
HOIST SYSTEMS Technic [nc" Equipment Vil'., Pawtucket. R.l. Technic offers a complete line of hoist systems with lift capacities ranging from 5 to 4,000 lbs. Hoist configurations include Overhead In-board or Out-board. Cantilevered Side-arm, Rim Runner, Tri-axis, MAC-250, MAC-750, and E-Class, a fully enclosed hoist for cleanroom-type environments. Hoist features and options include low-cost PLC and PC controllers or Technic's exclusive MPS random loading and process control software. Circle 159 on reader information card ORRHEAD CONVEYOR Padill!, COllwyvrs Buffalv, N. Y. Pacline track and chain conveying systems consist of a universal link conveyor chain inside a round conveyor track. Flexibility enables conveying through tight radius curves on both the horizontal and vertical plane. Loads can be transported hanging or can be inverted to convey load-carrying trays. C-250 series chain is designed for loads to 50 lb per pendant, which are standard on 6-in. centers. Distributed loads to 30,000 lb can be conveyed on a 600-ft system with only one drive. Adding additional drives proportionally increases conveyor length. Track sections are prefabricated with a joining flange at each end, simplifying installation. On-site welding is unnecessary and rerouting changes can be made. Circle 161 on reader information card March 2000 DC-DRIVE PROGRAMMABLE HOIST Autv Technolvgy Co., Strongsville. Ohio The DC Series programmable hoist is designed to consume less power and with fewer components to replace than adjustable frequency AC-drive hoists. Routine maintenance is minimal because there are no inverter circuits or cables. Dynamic braking and a holding brake eliminate brake and clutch maintenance. Microelectronic controls au- tomate the unit for easier operation, and produc- tion is maximized by ramped acceleration and deceleration for high-speed movement without rack swing. Circle 160 on reader information card 23

Transcript of DC-drive programmable hoist

Page 1: DC-drive programmable hoist

HOIST SYSTEMSTechnic [nc" Equipment Vil'., Pawtucket. R.l.

Technic offers a complete line of hoist systemswith lift capacities ranging from 5 to 4,000 lbs.Hoist configurations include Overhead In-board orOut-board. Cantilevered Side-arm, Rim Runner,Tri-axis, MAC-250, MAC-750, and E-Class, a fullyenclosed hoist for cleanroom-type environments.Hoist features and options include low-cost PLCand PC controllers or Technic's exclusive MPSrandom loading and process control software.

Circle 159 on reader information card

ORRHEAD CONVEYORPadill!, COllwyvrs lIlt'"~ Buffalv, N. Y.

Pacline track and chain conveying systems consistof a universal link conveyor chain inside a roundconveyor track. Flexibility enables conveyingthrough tight radius curves on both the horizontaland vertical plane. Loads can be transportedhanging or can be inverted to convey load-carryingtrays. C-250 series chain is designed for loads to50 lb per pendant, which are standard on 6-in.centers. Distributed loads to 30,000 lb can beconveyed on a 600-ft system with only one drive.Adding additional drives proportionally increasesconveyor length. Track sections are prefabricatedwith a joining flange at each end, simplifyinginstallation. On-site welding is unnecessary andrerouting changes can be made.

Circle 161 on reader information card

March 2000

DC-DRIVE PROGRAMMABLE HOISTAutv Technolvgy Co., Strongsville. Ohio

The DC Series programmable hoist is designed toconsume less power and with fewer components toreplace than adjustable frequency AC-drivehoists. Routine maintenance is minimal becausethere are no inverter circuits or cables. Dynamicbraking and a holding brake eliminate brake andclutch maintenance. Microelectronic controls au­tomate the unit for easier operation, and produc­tion is maximized by ramped acceleration anddeceleration for high-speed movement withoutrack swing.

Circle 160 on reader information card

23