Date: Approved: Type: Fixture: Project: FCF1103Specification Sheet 3 US Commercial Lighting...
Transcript of Date: Approved: Type: Fixture: Project: FCF1103Specification Sheet 3 US Commercial Lighting...
Specification Sheet a US Commercial Lighting Manufacturer Since 1982
SPECIFICATIONS
PhySICAlbeam spread 15° | 25° | 40° | 60° | 110°
lengths/dimensions [ lxDxh ] 3.75"W x 3.3"D x 5.7"H
weight 2.8 lbs
housing marine grade, corrosion resistant, low copper, solid die-cast aluminum; captive stainless steel fasteners
lens anti-reflective-clear, tempered glass w/silicone gasketing - IK07 Impact Rating
mounting standard mounting is flat base U-Joint Bracket with ¼" holeincludes adjustments for 180° vertical rotation and 360° horizontal rotation
ingress protection dry, damp or wet locations IP66 rated
vibration resistance compliant with 3G ANSI C136.31
finish UV stable polyester powder coat
PErFOrmANCEcolor temperature 2700K 3000K 3500K 4000K 5000K
lumen output 867 lm 885 lm 900 lm 915 lm 933 lm
lifetime > 70,000 hours / L90 or better
color consistency Step 2 McAdams Ellipse / CRI ≥ 90
temperature operating: -49°F to 104°F (-40°C to 40°C) | start up: -49°F to 104°F (-40°C to 40°C) | storage: -49°F to 176°F (-45°C to 80°C)
junction temperature 73°C @ TA 25°C
warranty 5 year limited warranty (refer to website for details)
ElECTrICAlinput voltage Universal 120–277V AC
power supply integral Class II, electronic high-power factor > 94% @120V
certification CEC Title 24 - JA8 Compliant
standards ETL / cETL or CE, tested to UL 1598 and UL 8750 standards / UL-Class I / IES LM-79 / LM-80
power consumption 7W @ 120V
interface optional: 0-10V Dimmingw (only available with optional remote driver)
This product has Quick Ship options available. Click to view the FC|SSl Quick Ship catalog.
FCF1103FCF1103 in the FC Lighting 1100 Flood Light Series is a round, compact luminaire that provides the widest range of mounting options in the industry. The FCF1103 is available with 5 CCT options and an integral universal voltage driver which allows for easy installation. Our wide range of optical accessories provides the tools to design every project with an ideal lighting solution.
FCF1103 Shown with visor optical accessory.
Date: Approved:
Type:
Fixture:
Project:
Expanded Disclaimer: Due to continuous development and improvements, specifications are subject to change without notice. FC Lighting and Solid State Luminaires reserves the right to change lab test details or specifica-tions without notice. Product use certifies agreement to Solid State Luminaires terms and conditions. FCF1100 Series Flood Lights are engineered and produced in our Illinois manufacturing facility.
RF Rev. 08/23/2018
Specification Sheet a US Commercial Lighting Manufacturer Since 1982
ORDERING INFORMATION
FCF1103
model voltage CCT finish optics factory installed accessories*
FCF1103 3" Flood Light UNV 120V - 277V 27K 2700K BK black SP Spot - 15° lD-r LED Dimming (0-10V remote only) max 10” leadwire120V 120 Volt 3K 3000K BZ bronze mS Medium Spot - 25° PE Photo Eye (120V only)
35K 3500K Wh white mF Medium Flood - 40° optical accessories (choose only one per fixture)
4K 4000K Sl silver Fl Flood - 60° CV3 Cut-Off Visor
5K 5000K CC custom color WFl Wide Flood - 110° CV3-rG3 Cut-Off Visor w/Rock Guard
Static Colors lSN3 Long Snoot
r Red lSN3-SF3 Long Snoot w/Screen Frame
G Green rG3 Rock Guard
B Blue rPS Remote Power Supply (3 fixture max - required for 0-10V Dimming)
* Parts designated as factory installed require assembly prior to shipment and are not adjustable in the field. Adjustments made to these features or tamporing with factory installed parts by any other agent will result in voiding the product warranty.
mounting Accessories (choose only one mounting option per fixture below for each fixture ordered)
FCF1103
_______ AS Architectural Surface Mount
_______ FEA6 Flood Extension Arm - 6"
_______ FEA12 Flood Extension Arm - 12"
_______ FEA18 Flood Extension Arm - 18"
_______ Dr Direct Round Pole Mount
_______ GS3 Ground Stake
_______ hGS Heavy Duty Ground Stake
_______ JB Junction Box (Outdoor Rated)
_______ mP Mounting Plate
_______ PC Pole Clamp
_______ PF Post Top Fitter
_______ SB Surface Base Mount
_______ SF Slip Fitter
_______ TA Tenon Adaptor
_______ Tm Tree Mount
______ y3 Yoke Arm (removes knuckle)
RF Rev. 08/23/2018
Specification Sheet a US Commercial Lighting Manufacturer Since 1982
FACTOry INSTAllED ACCESSOrIES
FCF1103 DimensionsPrODUCT DImENSIONS - STANDArD PrODUCT
width 3.75" W
diameter 3.3" D
height 5.7" H
CV3 - cut-off visor 2" W
overall width 5.75" W
2
3.35
6
1332"
PHOTO EYE
AA
BB
4
4
3
3
2
2
1
1
Notes:
1. All parts to be deburred and degreased/clean of oil2. All parts to be adequately packaged3 Undefined dimensions are to be obained from the 3-D model
Default1/31/2018
DESCRIPTION:
1/31/2018
Date:
X.X° 0.1°
--
BY.
Material:
REVISION# A
--
DESCRIPTION
X/X 1/8
RELEASE FOR PROTOTYPE--
DATE
--
--
ECN#- A
REV.
Designed by:
FCLighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
X.X 0.064
Part Number:
Sheet 1 of 1 X° 1° X.XXX 0.016Approved by:X.XX 0.032AL. Date:
FILE NAME: PHOTO EYE FCF1103.SLDDRW
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
AA
BB
4
4
3
3
2
2
1
1
Notes:
1. All parts to be deburred and degreased/clean of oil2. All parts to be adequately packaged3 Undefined dimensions are to be obained from the 3-D model
No Stake1/31/2018
DESCRIPTION:
1/31/2018
Date:
X.X° 0.1°
--
BY.
Material:
REVISION# A
--
DESCRIPTION
X/X 1/8
RELEASE FOR PROTOTYPE--
DATE
--
--
ECN#- A
REV.
Designed by:
FCLighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
X.X 0.064
Part Number:
Sheet 1 of 1 X° 1° X.XXX 0.016
Approved by:X.XX 0.032AL. Date:
FILE NAME: Long Snoot FCF1105.SLDDRW
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
6.25 in
AA
BB
4
4
3
3
2
2
1
1
Notes:
1. All parts to be deburred and degreased/clean of oil2. All parts to be adequately packaged3 Undefined dimensions are to be obained from the 3-D model
No Stake1/31/2018
DESCRIPTION:
1/31/2018
Date:
X.X° 0.1°
--
BY.
Material:
REVISION# A
--
DESCRIPTION
X/X 1/8
RELEASE FOR PROTOTYPE--
DATE
--
--
ECN#- A
REV.
Designed by:
FCLighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
X.X 0.064
Part Number:
Sheet 1 of 1 X° 1° X.XXX 0.016
Approved by:X.XX 0.032AL. Date:
FILE NAME: Long Snoot FCF1105.SLDDRW
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
2.5 in
AA
BB
4
4
3
3
2
2
1
1
Notes:
1. All parts to be deburred and degreased/clean of oil2. All parts to be adequately packaged3 Undefined dimensions are to be obained from the 3-D model
No Stake1/31/2018
DESCRIPTION:
1/31/2018
Date:
X.X° 0.1°
--
BY.
Material:
REVISION# A
--
DESCRIPTION
X/X 1/8
RELEASE FOR PROTOTYPE--
DATE
--
--
ECN#- A
REV.
Designed by:
FCLighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
X.X 0.064
Part Number:
Sheet 1 of 1 X° 1° X.XXX 0.016
Approved by:X.XX 0.032AL. Date:
FILE NAME: Long Snoot FCF1105.SLDDRW
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
2.5 in
AA
BB
4
4
3
3
2
2
1
1
Notes:
1. All parts to be deburred and degreased/clean of oil2. All parts to be adequately packaged3 Undefined dimensions are to be obained from the 3-D model
No Stake1/31/2018
DESCRIPTION:
1/31/2018
Date:
X.X° 0.1°
--
BY.
Material:
REVISION# A
--
DESCRIPTION
X/X 1/8
RELEASE FOR PROTOTYPE--
DATE
--
--
ECN#- A
REV.
Designed by:
FCLighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
X.X 0.064
Part Number:
Sheet 1 of 1 X° 1° X.XXX 0.016
Approved by:X.XX 0.032AL. Date:
FILE NAME: Long Snoot FCF1105.SLDDRW
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
6.25 in
3.7 in
3.3 in 5.7in
2
3.35
6
3.140
N11103
J11103B
J11103A 0.39
WELD AND GRIND8 PLACES
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
FILE NAME: RG11103, ROCK GUARD, ASSEMBLY.SLDDRW
Date:X.XX 0.032 Approved by:
X.XXX 0.016X° 1°Sheet 1 of 1
Part Number: RG11103
X.X 0.064
Lighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
FCDesigned by:
REV.A-
ECN#
--
--
DATE
--
RELEASE FOR PRODUCTION
X/X 1/8
DESCRIPTION
--
REVISION# AMaterial:SEE DRAWING
BY.JO
--
X.X° 0.1°
Date:
1/26/18
DESCRIPTION: ROCK GUARD ASSEMBLY
JOHN O1/26/18
/2017
3.14 in.4 in
3.140
N11103
J11103B
J11103A
0.39
WELD AND GRIND
8 PLACES
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FC LIGHTING. ANY REPRODUCTION IN
PART OR AS A WHOLE W
ITHOUT THE
WRITTEN PERM
ISSION OF FC LIGHTING
IS PROHIBITED.PROPRIETARY AND CONFIDENTIAL
FILE NAME: RG11103, ROCK GUARD, ASSEM
BLY.SLDDRW
Date:
X.XX 0.032
Approved by:
X.XXX 0.016
X° 1°
Sheet 1 of 1
Part Number: RG
11103
X.X 0.064
Lighting Manufacturers
3609 Swenson Ave
Saint Charles, IL 60174
FCDesigned by:REV.A
-
ECN#
--
--
DATE
--
RELEASE FOR PRODUCTION
X/X 1/8DESCRIPTION--
REVISION# A
Material:
SEE DRAWING
BY.JO
--
X.X° 0.1°
Date:
1/26/18
DESCRIPTION: ROCK GUARD
ASSEMBLY
JOHN O
1/26/18
/2017
4.15 in
3.140
N11103
J11103B
J11103A 0.39
WELD AND GRIND8 PLACES
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
FILE NAME: RG11103, ROCK GUARD, ASSEMBLY.SLDDRW
Date:X.XX 0.032 Approved by:
X.XXX 0.016X° 1°Sheet 1 of 1
Part Number: RG11103
X.X 0.064
Lighting Manufacturers3609 Swenson AveSaint Charles, IL 60174 FC
Designed by:
REV.A-
ECN#
--
--
DATE
--
RELEASE FOR PRODUCTION
X/X 1/8
DESCRIPTION
--
REVISION# AMaterial:SEE DRAWING
BY.JO
--
X.X° 0.1°
Date:
1/26/18
DESCRIPTION: ROCK GUARD ASSEMBLY
JOHN O1/26/18
/2017
2
3.35
6
Photo Eye
5.75 in2 in
2
3.35
6
6 162
5115
379
FC LIGHTING MODEL FCF1106
SHYLON P/N: SL1103S-1
CAST ALUMINUM - NO FINISH
FILE NAME: F1106CV.SLDDRW
X.XX 0.032
Approved by:
X.XXX 0.016
X° 1°
Sheet 1 of 1
X.X 0.064
Lighting Manufacturers
3609 Swenson Ave
Saint Charles, IL 60174
FCREV.
- ECN#
-
-
Date:1-02-18
1-02-18 DATE
-
RELEASE FOR PRODUCTION
X/X 1/8
DESCRIPTION
-
BY.
JA
-X.X° 0.1°
1
Part No: F1106CV
Material:
REVISION#
DESCRIPTION: SL1103S-1 VISOR BEZEL
Date:
Designed by: JOE ASTA
1
1.5 in
1.5 in
3.3 in 3.7495
3.385
7.87
200
5.71
145
.875 in
180°
360°
rG3 - rock guard .4" W
overall width 4.15" W
PE - photo eye flush
overall width 3.75" W
lSN3 - long snoot 2.5" L
overall length 6.25" L
lSN3 w/ SF3 - screen frame 2.5" L
overall length 6.25" L
standard mounting isa flat based
U-Joint Bracket with ¼" hole
Specification Sheet a US Commercial Lighting Manufacturer Since 1982
PrODUCT WITh mOUNTING OPTIONS
2
3.35
6
GS3 - ground stake 7.9" H
overall height 13.6" H
PrODUCT DImENSIONS CONTINUED
Tm - tree mount 2.5" Depth
overall length 8.2" L (from tree)
3.75 in
13.6 in
7.9 in
1.5 in
5.7 in
JB - junction box 2.125" H
overall height 7.825" H
2.125 in
1.5 in
hGS - heavy duty GS 20.5" H
overall height 26.2" H
20 716 "
2 2732 "
9 14 "
A A
B B
4
4
3
3
2
2
1
1
9.25 in
20.5 in2.875 in
3.75 in
5.7 in
20 716 "
2 2732 "
9 14 "
A A
B B
4
4
3
3
2
2
1
1
26.5 in
2
3.35
6
8.2 in
2.5 in Assembled
Tree Not Included
20716"
22732"
914"
AA
BB
4
4
3
3
2
2
1
1
top / bottomconduit exits
17.9 in maximumbelow surface depth available
20716"
22732"
914"
AA
BB
4
4
3
3
2
2
1
1 adjustable wing height
2
3.35
6
AS - architectural surface mount 1.5" H
overall height 7.2" H
3.75 in
5 1332 "
1 1332 "
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
FILE NAME: Architectural Surface Mount Floods.SLDDRW
Date: X.XX 0.032Approved by:
X.XXX 0.016 X° 1° Sheet 1 of 2
DESCRIPTION: DIE CAST CANOPY COVER MACHINED FOR FCF FLOODS
Part Number: V25520-M2 X.X 0.064
Lighting Manufacturers3609 Swenson AveSaint Charles, IL 60174FC
Designed by:JOE ASTA
REV.A -
ECN#
-
-
-
-
Date:2/01/18
2/01/18DATE
-
-RELEASE FOR PRODUCTION
X/X 1/8
DESCRIPTION
-
-
REVISION#
Material:
BY.JA
-
-
X.X° 0.1°
513 32
"
113 32
"
THE
INFO
RMA
TION
CO
NTA
INED
IN T
HIS
DRA
WIN
G IS
THE
SO
LE P
ROPE
RTY
OF
FC L
IGHT
ING
. A
NY
REPR
OD
UCTIO
N IN
PA
RT O
R A
S A
WHO
LE W
ITHO
UT T
HE
WRI
TTEN
PER
MIS
SIO
N O
F FC
LIG
HTIN
G
IS P
ROHI
BITE
D.
PRO
PRIE
TARY
AN
D C
ON
FIDE
NTIA
L
FILE
NA
ME:
Arc
hite
ctur
al S
urfa
ce M
ount
Flo
ods.S
LDD
RW
Dat
e:X.
XX
0.03
2A
pp
rove
d b
y:
X.XX
X 0
.016
X°
1°Sh
ee
t 1 o
f 2
DES
CRI
PTIO
N: D
IE C
AST
CA
NO
PY C
OV
ER
MA
CHI
NED
FO
R FC
F FL
OO
DS
Part
Num
ber
: V
2552
0-M
2 X.
X
0.06
4
Ligh
ting
Man
ufac
ture
rs36
09 S
wen
son
Ave
Sain
t Cha
rles
, IL
6017
4FC
Des
igne
d b
y:JO
E A
STA
REV
.A
-EC
N#
- -
- -
Dat
e:2/
01/1
8
2/01
/18
DA
TE- -RE
LEA
SE F
OR
PRO
DUC
TION
X/X
1/8
DES
CRI
PTIO
N
- -
REV
ISIO
N#
Ma
teria
l:
BY.
JA- -
X.X°
0.1
°
5.5 in1.5 in
7.5 in
5.7 in
.625 in
Job:Approval:Type:
Tree Mount Box Option MODEL MO91” Strap, Cast Box, Tree Mount
Specifications:
Ordering Information:
Example: MO9A - BNT - 1 - MO6S-1 - 72 ©2003 - 2012 Vision3 Lighting® P.O. Box 607, Fowler, CA 93625 (559) 834-5749 (559) 834-4779 fax www.vision3lighting.com
revision 10/15/12
Junction Box: Industry standard cast aluminum single gang junction box.Up to three boxes can be mounted on a single strap (the number of boxes that can be safely supported varies by fixture type and material. Contact a Vision3 lighting CSR for allowable combinations). 304 stainless steel bracket attaches box to strap and allows for easy sliding adjustment during installation.Cover: Available with no cover, single mount hole cast aluminum box cover (MO6S-1), or double mount hole cast aluminum box cover (MO6S-2). See MO6 specification sheet for more information (box cover options come with foam gasket).Strap: 48”, 72”, & 120” long strap assembly consists of a 1” wide, olive green nylon strap stitched to a steel flat hook. Steel hook is coated with Bronze Textured TGIC thermo set polyester powder coat paint, applied over a corrosion resistant chromate finish. 48” strap assembly fits up to 14” diameter trees. 72” strap assembly fits up to 21” diameter trees. 72” strap assembly fits up to 36”
diameter tree. (Contact factory for larger applications.) Note: Strap should be loosened periodically to fit tree as it grows. Allow for future tree growth when considering strap requirements.Buckle: 304 stainless steel ratcheting buckle is corrosion resistant and is coated with Bronze Textured TGIC thermo set polyester powder coat paint. Ratchet allows for easy adjustment of strap. Strap hook clips to buckle, allowing easy installation and removal.Finish: Box and optional covers are coated with TGIC thermo set polyester powder coat paint; available in 14 standard colors. Electrical: Box comes with one open 1/2” NPS conduit entry hole on bottom (Conduit or liquid tight cable entry connectors not supplied.)Certification: CSA tested & certified to US and Canadian safety standards for wet location landscape use.
Notes:1.Thenumberofcanopiesthatcanbesafelysupportedvariesbyfixturetype
andmaterial.ContactaVision3lightingCSRforallowablecombinations.2.Whenacoverisspecified,allboxeswillhavethesamecover.Ifadifferent
coverisdesiredoneachbox,thanspecifythe‘0-NoCover’optionandorderthecoversseparately.
3.TousewithMO4machinedrectangularcanopy,specify‘0-NoCover’optionandorderMO4canopyseparately.
4.SeeMO6specificationsheetforcoverdetails.5.Specifications,certifications,andorderinginformationaresubjecttochange.
Pleasecheckwebsiteforlatestspecificationsheets.
FinishBL-BlackBLT-TexturedBlackBN-BronzeBNT-TexturedBronzeBAT-TexturedBarkWI-WhiteGRT-TexturedGreenSI-SilverGY-GreyBE-BeigeGNT-TexturedGraniteSAT-TexturedSandPAT-TexturedPatinaEAT-TexturedEarth
Cover Option 2, 3
0-NoCoverMO6S-1-SingleMountHoleCastCover4MO6S-2-DoubleMountHoleCastCover4
ModelMO9A-Aluminum
Box Qty. 1
1-OneBox2-TwoBoxes3-ThreeBoxes
MO9AStrap Length
48-48”TreeStrap72-72”TreeStrap120-120”TreeStrap
Job:Approval:Type:
Tree Mount Box Option MODEL MO91” Strap, Cast Box, Tree Mount
Specifications:
Ordering Information:
Example: MO9A - BNT - 1 - MO6S-1 - 72 ©2003 - 2012 Vision3 Lighting® P.O. Box 607, Fowler, CA 93625 (559) 834-5749 (559) 834-4779 fax www.vision3lighting.com
revision 10/15/12
Junction Box: Industry standard cast aluminum single gang junction box.Up to three boxes can be mounted on a single strap (the number of boxes that can be safely supported varies by fixture type and material. Contact a Vision3 lighting CSR for allowable combinations). 304 stainless steel bracket attaches box to strap and allows for easy sliding adjustment during installation.Cover: Available with no cover, single mount hole cast aluminum box cover (MO6S-1), or double mount hole cast aluminum box cover (MO6S-2). See MO6 specification sheet for more information (box cover options come with foam gasket).Strap: 48”, 72”, & 120” long strap assembly consists of a 1” wide, olive green nylon strap stitched to a steel flat hook. Steel hook is coated with Bronze Textured TGIC thermo set polyester powder coat paint, applied over a corrosion resistant chromate finish. 48” strap assembly fits up to 14” diameter trees. 72” strap assembly fits up to 21” diameter trees. 72” strap assembly fits up to 36”
diameter tree. (Contact factory for larger applications.) Note: Strap should be loosened periodically to fit tree as it grows. Allow for future tree growth when considering strap requirements.Buckle: 304 stainless steel ratcheting buckle is corrosion resistant and is coated with Bronze Textured TGIC thermo set polyester powder coat paint. Ratchet allows for easy adjustment of strap. Strap hook clips to buckle, allowing easy installation and removal.Finish: Box and optional covers are coated with TGIC thermo set polyester powder coat paint; available in 14 standard colors. Electrical: Box comes with one open 1/2” NPS conduit entry hole on bottom (Conduit or liquid tight cable entry connectors not supplied.)Certification: CSA tested & certified to US and Canadian safety standards for wet location landscape use.
Notes:1.Thenumberofcanopiesthatcanbesafelysupportedvariesbyfixturetype
andmaterial.ContactaVision3lightingCSRforallowablecombinations.2.Whenacoverisspecified,allboxeswillhavethesamecover.Ifadifferent
coverisdesiredoneachbox,thanspecifythe‘0-NoCover’optionandorderthecoversseparately.
3.TousewithMO4machinedrectangularcanopy,specify‘0-NoCover’optionandorderMO4canopyseparately.
4.SeeMO6specificationsheetforcoverdetails.5.Specifications,certifications,andorderinginformationaresubjecttochange.
Pleasecheckwebsiteforlatestspecificationsheets.
FinishBL-BlackBLT-TexturedBlackBN-BronzeBNT-TexturedBronzeBAT-TexturedBarkWI-WhiteGRT-TexturedGreenSI-SilverGY-GreyBE-BeigeGNT-TexturedGraniteSAT-TexturedSandPAT-TexturedPatinaEAT-TexturedEarth
Cover Option 2, 3
0-NoCoverMO6S-1-SingleMountHoleCastCover4MO6S-2-DoubleMountHoleCastCover4
ModelMO9A-Aluminum
Box Qty. 1
1-OneBox2-TwoBoxes3-ThreeBoxes
MO9AStrap Length
48-48”TreeStrap72-72”TreeStrap120-120”TreeStrap
Job:Approval:Type:
Tree Mount Box Option MODEL MO91” Strap, Cast Box, Tree Mount
Specifications:
Ordering Information:
Example: MO9A - BNT - 1 - MO6S-1 - 72 ©2003 - 2012 Vision3 Lighting® P.O. Box 607, Fowler, CA 93625 (559) 834-5749 (559) 834-4779 fax www.vision3lighting.com
revision 10/15/12
Junction Box: Industry standard cast aluminum single gang junction box.Up to three boxes can be mounted on a single strap (the number of boxes that can be safely supported varies by fixture type and material. Contact a Vision3 lighting CSR for allowable combinations). 304 stainless steel bracket attaches box to strap and allows for easy sliding adjustment during installation.Cover: Available with no cover, single mount hole cast aluminum box cover (MO6S-1), or double mount hole cast aluminum box cover (MO6S-2). See MO6 specification sheet for more information (box cover options come with foam gasket).Strap: 48”, 72”, & 120” long strap assembly consists of a 1” wide, olive green nylon strap stitched to a steel flat hook. Steel hook is coated with Bronze Textured TGIC thermo set polyester powder coat paint, applied over a corrosion resistant chromate finish. 48” strap assembly fits up to 14” diameter trees. 72” strap assembly fits up to 21” diameter trees. 72” strap assembly fits up to 36”
diameter tree. (Contact factory for larger applications.) Note: Strap should be loosened periodically to fit tree as it grows. Allow for future tree growth when considering strap requirements.Buckle: 304 stainless steel ratcheting buckle is corrosion resistant and is coated with Bronze Textured TGIC thermo set polyester powder coat paint. Ratchet allows for easy adjustment of strap. Strap hook clips to buckle, allowing easy installation and removal.Finish: Box and optional covers are coated with TGIC thermo set polyester powder coat paint; available in 14 standard colors. Electrical: Box comes with one open 1/2” NPS conduit entry hole on bottom (Conduit or liquid tight cable entry connectors not supplied.)Certification: CSA tested & certified to US and Canadian safety standards for wet location landscape use.
Notes:1.Thenumberofcanopiesthatcanbesafelysupportedvariesbyfixturetype
andmaterial.ContactaVision3lightingCSRforallowablecombinations.2.Whenacoverisspecified,allboxeswillhavethesamecover.Ifadifferent
coverisdesiredoneachbox,thanspecifythe‘0-NoCover’optionandorderthecoversseparately.
3.TousewithMO4machinedrectangularcanopy,specify‘0-NoCover’optionandorderMO4canopyseparately.
4.SeeMO6specificationsheetforcoverdetails.5.Specifications,certifications,andorderinginformationaresubjecttochange.
Pleasecheckwebsiteforlatestspecificationsheets.
FinishBL-BlackBLT-TexturedBlackBN-BronzeBNT-TexturedBronzeBAT-TexturedBarkWI-WhiteGRT-TexturedGreenSI-SilverGY-GreyBE-BeigeGNT-TexturedGraniteSAT-TexturedSandPAT-TexturedPatinaEAT-TexturedEarth
Cover Option 2, 3
0-NoCoverMO6S-1-SingleMountHoleCastCover4MO6S-2-DoubleMountHoleCastCover4
ModelMO9A-Aluminum
Box Qty. 1
1-OneBox2-TwoBoxes3-ThreeBoxes
MO9AStrap Length
48-48”TreeStrap72-72”TreeStrap120-120”TreeStrap
22.5°
90°
7.2
0.80
0.18
3.5
30°
30°
SB - SURFACE BASE
AS - ARCHITECURAL M
OUNT
DESIG
NED FO
R OCTA
GO
NAL
JUNCTIO
N BO
X
HOLE DRAWIN
GS
5.11" outside diameter
3.5" bolt diameter
30° bolt spacing
0.2
FCF1103 W/ CANTILEVER ARM12 INCH SHOWN
OVERALL LENGTH - 12.25 - 8"
OVERALL LENGTH - 16.25 - 12"
OVERALL LENGTH - 22.25 - 18"FEAX - flood extension arm 3 Lengths
overall length 10.3" L 6" L
overall length 16.3" L 12" L
overall length 22.3" L 18" L
12 in
Available in 3 lengths.
4 in
Mounting Plate
Shown as FEA12 (12 in catilever arm)
0.2
FCF1103 W/ CANTILEVER ARM12 INCH SHOWN
OVERALL LENGTH - 12.25 - 8"
OVERALL LENGTH - 16.25 - 12"
OVERALL LENGTH - 22.25 - 18"16.3 in
0.2
FCF1103 W/ CANTILEVER ARM12 INCH SHOWN
OVERALL LENGTH - 12.25 - 8"
OVERALL LENGTH - 16.25 - 12"
OVERALL LENGTH - 22.25 - 18"
4 in
2.5 in
2.5 in
2
3.35
6
offset flat based mounting U-Joint Bracket with ¼" hole
2
3.35
6
Specification Sheet a US Commercial Lighting Manufacturer Since 1982
PrODUCT WITh mOUNTING OPTIONS
PrODUCT DImENSIONS CONTINUED
SF - slip fitter 1.75" H 6.5" H
overall height (fully extended) 14.25" H
PF - post top fitter 4.5" H
overall height 10.2" H
10 12 "
A A
B B
4
4
3
3
2
2
1
1
Notes:
1. All parts to be deburred and degreased/clean of oil2. All parts to be adequately packaged3 Undefined dimensions are to be obained from the 3-D model
Default2/1/2018
DESCRIPTION:
2/1/2018
Date:
X.X° 0.1°
--
BY.
Material:
REVISION# A
--
DESCRIPTION
X/X 1/8
RELEASE FOR PROTOTYPE--
DATE
--
--
ECN#-A
REV.
Designed by:
FC Lighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
X.X 0.064
Part Number:
Sheet 1 of 1X° 1°X.XXX 0.016Approved by: X.XX 0.032 AL.Date:
FILE NAME: Tenon Adapter Assy.SLDDRW
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
TA - 4X tenon adapter 10.5" L 4" H
overall height 9.7" H
180°adjustable
6 1532 "
3 332 "
A A
B B
4
4
3
3
2
2
1
1
1.75 in
6.5 in
3.1 in
61532"
3332"
A
A
B
B
4
4
3
3
2
2
1
1
61532"
3332"
A
A
B
B
4
4
3
3
2
2
1
1
for use with 2.325 in tenon(tenon supplied by others)
6 1532 "
3 332 "
A A
B B
4
4
3
3
2
2
1
1
2
3.35
6
Inside Diameter2.5 in
attacheswith (2) two.5 in bolts(supplied)
4 116 "
4 12 "
A A
B B
4
4
3
3
2
2
1
1
Notes:
1. All parts to be deburred and degreased/clean of oil2. All parts to be adequately packaged3 Undefined dimensions are to be obained from the 3-D model
Default2/2/2018
DESCRIPTION:
2/2/2018
Date:
X.X° 0.1°
--
BY.
Material:
REVISION# A
--
DESCRIPTION
X/X 1/8
RELEASE FOR PROTOTYPE--
DATE
--
--
ECN#-A
REV.
Designed by:
FC Lighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
X.X 0.064
Part Number:
Sheet 1 of 1X° 1°X.XXX 0.016Approved by: X.XX 0.032 AL.Date:
FILE NAME: post top cap.SLDDRW
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
4.5 in
4 in
4 116 "
4 12 "
A A
B B
4
4
3
3
2
2
1
1
Notes:
1. All parts to be deburred and degreased/clean of oil2. All parts to be adequately packaged3 Undefined dimensions are to be obained from the 3-D model
Default2/2/2018
DESCRIPTION:
2/2/2018
Date:
X.X° 0.1°
--
BY.
Material:
REVISION# A
--
DESCRIPTION
X/X 1/8
RELEASE FOR PROTOTYPE--
DATE
--
--
ECN#-A
REV.
Designed by:
FC Lighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
X.X 0.064
Part Number:
Sheet 1 of 1X° 1°X.XXX 0.016Approved by: X.XX 0.032 AL.Date:
FILE NAME: post top cap.SLDDRW
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
10.5 in
2
3.35
6
for use with 3.5 in pole or tenon adapter(supplied by
others)
for use with 2.325 in tenon(tenon supplied
by others)
.5 in threaded hole for tenon
attachment
4 in
10 12 "
A A
B B
4
4
3
3
2
2
1
1
Notes:
1. All parts to be deburred and degreased/clean of oil2. All parts to be adequately packaged3 Undefined dimensions are to be obained from the 3-D model
Default2/1/2018
DESCRIPTION:
2/1/2018
Date:
X.X° 0.1°
--
BY.
Material:
REVISION# A
--
DESCRIPTION
X/X 1/8
RELEASE FOR PROTOTYPE--
DATE
--
--
ECN#-A
REV.
Designed by:
FC Lighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
X.X 0.064
Part Number:
Sheet 1 of 1X° 1°X.XXX 0.016Approved by: X.XX 0.032 AL.Date:
FILE NAME: Tenon Adapter Assy.SLDDRW
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
tenon adapter can mount up to 4 fixtures(1 per side)
PVC plugs provided
for unused holes
150°adjustable
93.73.69
31.71.25
85.03.3
5
13
0.6
5.14
88
.23.
47
5.14 in
5.250
7.625
6.275
A A
B B
4
4
3
3
2
2
1
1
Notes:
1. All parts to be deburred and degreased/clean of oil2. All parts to be adequately packaged3 Undefined dimensions are to be obained from the 3-D model
Default2/2/2018
DESCRIPTION:
2/2/2018
Date:
X.X° 0.1°
--
BY.
Material:
REVISION# A
--
DESCRIPTION
X/X 1/8
RELEASE FOR PROTOTYPE--
DATE
--
--
ECN#-A
REV.
Designed by:
FC Lighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
X.X 0.064
Part Number:
Sheet 1 of 1X° 1°X.XXX 0.016Approved by: X.XX 0.032 AL.Date:
FILE NAME: Surface Base Mount.SLDDRW
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
10.95 in
5.250
7.625
6.275
A A
B B
4
4
3
3
2
2
1
1
Notes:
1. All parts to be deburred and degreased/clean of oil2. All parts to be adequately packaged3 Undefined dimensions are to be obained from the 3-D model
Default2/2/2018
DESCRIPTION:
2/2/2018
Date:
X.X° 0.1°
--
BY.
Material:
REVISION# A
--
DESCRIPTION
X/X 1/8
RELEASE FOR PROTOTYPE--
DATE
--
--
ECN#-A
REV.
Designed by:
FC Lighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
X.X 0.064
Part Number:
Sheet 1 of 1X° 1°X.XXX 0.016Approved by: X.XX 0.032 AL.Date:
FILE NAME: Surface Base Mount.SLDDRW
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
5.25 in7.625 in
2
3.35
6
SB - surface base 5.25" H
overall height 10.95" H
y3 - yoke arm 4" H
overall height 5.14" H
360°
93.73.69
31.71.25
85.03.3
5
13
0.6
5.14
88
.23.
47
270° adjustable
22.5°
90°
7.2
0.80
0.18
3.5 30°
30°
SB - SURFACE BASE AS - ARCHITECURAL MOUNT
DESIGNED FOR OCTAGONAL JUNCTION BOX
HOLE DRAWINGS
90°
7.2 in bolt diameter
10.5 in
FCF1103 - Y3 FCF1105 - Y5
FCF1106 - Y6
3.8 in
2.08 in
1.04" X .625" center
7.63 in outer diameter