![EPS Snabdevanje Pravilnik o Sistematizaciji EPS Snabdevanje05.11.2013[1]](https://static.fdocuments.net/doc/165x107/577cd1801a28ab9e789496d9/eps-snabdevanje-pravilnik-o-sistematizaciji-eps-snabdevanje051120131.jpg)
EPS Snabdevanje Pravilnik o Sistematizaciji EPS Snabdevanje05.11.2013[1]
Datasheet for NETTROLL 4 - eps-est.com
2
DS NetTroll 4 August 2010 Take control over your remote devices with our low-cost, flexible SCADA soſt- ware. Don’t worry about communicaon media. Don’t worry about complex programming algorithms or high user thresholds. NetTroll 4.0 is the intelligent choice. The built-in device configuraon tool and drawing editor enable you to con- trol and monitor your fault passage indicators and RTU’s in your own tailo- red environment. NetTroll ® 4 The powerful SCADA system for NORTROLL’s distributed applications. Features • Runs on a standard Windows PC plaorm. • Easy installaon and configuraon. • Easy-to-use operator interface. • User defined logs for monitoring of specific events. • Advanced Alarm Management. • Built-in Condional Acons Module (CAM) • Ideally suited for monitoring and control of report-by-excepon fault passage indicators and RTU’s. • Secure password protected user levels. • Advanced graphical features. • Built-in bitmap editor for creang user defined symbols. • Device specific message properes. • Unlimited number of devices can be installed. • Easy Master SCADA integraon with a wide range of SCADA protocols. Applicaons • Surveillance and control of all NORTROLL re- port-by-excepon applicaons • Fault Passage Indicators • Remote Terminals in substaons • Overhead-line actuators. • Water reservoir monitoring and control • Distributed generaon applicaons • Street lights control • ...and more!
Transcript of Datasheet for NETTROLL 4 - eps-est.com
DS NetTroll 4 August 2010
Take control over your remote devices with our low-cost, flexible SCADA soft-ware. Don’t worry about communication media. Don’t worry about complex programming algorithms or high user thresholds. NetTroll 4.0 is the intelligent choice. The built-in device configuration tool and drawing editor enable you to con-trol and monitor your fault passage indicators and RTU’s in your own tailo-red environment.
NetTroll® 4
The powerful SCADA system for NORTROLL’s distributed applications.
Features • Runs on a standard Windows PC platform.
• Easy installation and configuration.
• Easy-to-use operator interface.
• User defined logs for monitoring of specific events.
• Advanced Alarm Management.
• Built-in Conditional Actions Module (CAM)
• Ideally suited for monitoring and control of report-by-exception fault passage indicators and RTU’s.
• Secure password protected user levels.
• Advanced graphical features.
• Built-in bitmap editor for creating user defined symbols.
• Device specific message properties.
• Unlimited number of devices can be installed.
• Easy Master SCADA integration with a wide range of SCADA protocols.
Applications • Surveillance and control of all NORTROLL re-
port-by-exception applications
• Fault Passage Indicators
• Remote Terminals in substations
• Overhead-line actuators.
• Water reservoir monitoring and control
• Distributed generation applications
• Street lights control • ...and more!
DS NetTroll 4 August 2010
The ComTroll System Architecture
Supplementary Applications
About Nortroll AS Your Representative
Since the foundation in 1976, Nortroll AS has de-voted its activities to the development of equip-ment aiming to reduce electric utilities outage times. We offers a wide range of products for fault detection and remote operation in the MV Distribu-tion Network.
GSM
Internet or LAN
SCADA protocol
Fibre
GSM
Twisted Pairs
Ethernet
microSCADA
NETTROLLUHF/VHF radio
Fibre
UHF/VHF radio
UHF/VHF radio
ComTroll
RTU
ComTroll
RTU
ComTroll
RTU
LineTroll FPI
TES
T1
2
3 RESE
T
The
IntelligentFault Current
Indicator
CableTroll
LineTroll
V
ComTroll
GSM RTU
UHF/VHF radio
ComTroll
Substation RTUFibre
TES
T1
2
3 RESE
T
The
IntelligentFault Current
Indicator
CableTrollTwisted Pairs
SCADA Server
ComTroll
RTU
UHF/VHF radio
NetAlert NetAlert is a program that sends SMS alarms to one or more pre-defined users set up in a call list. NetAlert forwards messages set up as an alarm in the message properties in NetTroll. The SMS will contain the same alarm string as defined for the actual message in NetTroll. It also con-tains date, time and the outstation name.
NetGraph NetGraph is a program to to graphically present analog values from the outstations. Every time an updated analog value is received by NetTroll, the analog value is stored in a seperate log. NetGraph continously reads this log and updates the actual curve in real-time. All scales are dy-manic and will adjusted according to incomming values.
Ordering Information NetTroll SCADA Gateway The NetTroll SCADA Gateway comprises a pro-tocol engine for the SCADA protocol that is runned and a cross-reference table. NetTroll will appear in the SCADA network as a SLAVE. The NetTroll SCADA Gateway can be controlled from up to ten SCADA Masters.
15-7540-51 NetTroll 4 classic 15-7540-52 NetTroll 4 messenger 15-7540-50 NetTroll 4 plus 15-7500-40 NetTroll SCADA Gateway 15-7500-10 NetGraph 2.0 15-7500-02 NetAlert 3.0 SMS Alarm module w/GSM Modem 15-7540-03 NetTroll 4 Upgrade
