caleron-datasheet · Title: caleron-datasheet Created Date: 20190218125606Z
Datasheet chitu
-
Upload
oklok-filamenta -
Category
Technology
-
view
219 -
download
3
Transcript of Datasheet chitu
![Page 1: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/1.jpg)
3D PRINTER CONTROLLER
CBD-TECH CHITU V3.XA very easy but advance controller
board with pre-configured data
settings and add-on module
functions
Supports both delta, kossel-and cartesian
built 3D Printer
Full Color
Touchscreen
Included
![Page 2: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/2.jpg)
CBD-TECH CHITU V3.X WITH TFT SCREEN 2.8/3.5 INCH
COLOR TOUCH SCREEN
ADDITIONAL 5-10” TABLET CAN BE ADDED AND
SUPPORTED
![Page 3: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/3.jpg)
FEATURES
√ Support color TFT touch screen
√ ARM STM32 microprocessor
√ Allegro A4988 motor driver
√ Compatible with most 3D-printer structures (delta,kossel,cartesian)
√ Chitu firmware consist of important historically data settings\variables from different 3D-printer manufacturer and tests
√ Very stable, can print many hours ( tested and successfully printed none-stop 72 h)
√ Support breakpoints, pause print, save and continue next day
√ Optimized PID parameters and others important parameters in the firmware
√ 12/24V compatible!
√ Not limited to any print size, build as big as you wants!
√ Closed sourced firmware, but includes a configuration file for changing settings, very easy to use
√ Compatible with 5 motors!
√ Upgradeable hardware design letting you add extra hardware (add-on modules) to the 3D printer controller board(from V3.6)
The Chitu controller board is not open source, which means
the firmware is closed, instead you can change machine
setting and setup through a configuration file that is included.
The firmware is pre-loaded on the board and only CBD-Tech
has the access to change the firmware if needed.
![Page 4: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/4.jpg)
TECHNICAL
SPECIFICATIONS
External Dimension: 150x100 mm
Microprocessor: ARM chip STM32 (STM32F103ZET6)
Input Voltage: 12V~24V, 10~15A
Power Interface: Ordinary /Circular Interface of Adapter
Motor Driver: Allegro A4988
Motor Driven Interface: Single-end features 4 paths & 16 segments and double-end features 5
paths & 16 segments
Temperature Sensor Interface: 3 paths of 100K NTC (thermistor), 2 paths of MAX6675 (thermocouple)
Color Touch Screen: 2.8 or 3.5 inches of TFT
Connectivity: SD card, square USB that is convenient for plug and play; communication Baud Rate is 115200
File Format Supported: G-code
Machine Structure Supported: XYZ type, Ultimaker type, Hbot type, Delta,Kossel type.
Recommendation of Software: Cura/Repetier-host/Makerware
2.8 Inch Touchscreen Size: 60mmx100mm
3.5 Inch Touchscreen Size: 65mmx115mm
Manual: Yes full english manual and schematics
Drivers: Yes, full english drivers included
![Page 5: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/5.jpg)
SOME ADD-ON MODULES
The Chitu board is ”add-on” friendly. Simple add a module
to the controller board to upgrade your 3D Printer.
Customization have never been as easy with the Chitu
controller board.
![Page 6: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/6.jpg)
ADD-ON MODULES MAKES 3D PRINTING
UPGRADEABLE
![Page 7: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/7.jpg)
SEND FILE AND CONTROLL YOUR 3D PRINTER WIRELESS
WITH THE WI-FI ADD-ON MODULE
ANDROID APP INCLUDED
![Page 8: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/8.jpg)
SCHEMATIC OF THE
CHITU BOARD
![Page 9: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/9.jpg)
EASY TO USE WITH PRECONFIGURED
DATA
1. Simple choose your 3D Printer structure
type (delta, kossel or cartesian)
2. Open the ”complete machine
parameters” file and change settingsFor example:
Value 0=reprap type of machineValue 1=Makerbot type of machineValue 2=Ultimaker type of machine
M8029 I2 <---means you have successfully setup to use a 3D printer with
same construction as the Ultimaker.
3. Insert your new saved settings and input
the file Into SD card, make a setup run and
you are finished.
![Page 10: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/10.jpg)
CHITU
STANDARD
INTERFACE
DISPLAY
ALL
TOUCHSCREEN
AND
COLORFUL
![Page 11: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/11.jpg)
CHITU V3.X COMES IN 8 TYPES
Type A: Single extruder motherboard (Thermistor) + 2.8 inch touch screen
Type B: Single extruder motherboard (Thermocouple) + 2.8 inch touch screen
Type C: Double extruder motherboard (Thermistor) + 2.8 inch touch screen
Type D: Double extruder motherboard (Thermocouple) + 2.8 inch touch screen
Type E: Single extruder motherboard (Thermistor) + 3.5 inch touch screen
Type F: Single extruder motherboard (Thermocouple) + 3.5 inch touch screen
Type G: Double extruder motherboard (Thermistor) + 3.5 inch touch screen
Type H: Double extruder motherboard (Thermocouple) + 3.5 inch touch screen
![Page 12: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/12.jpg)
CHITU CURRENTLY HAVE THESE ADD-ON
MODULES (201507)
Type I: WiFi Adapter: You can control the machine, such as stop,
pause, continue, change temp but can also send file through
Type J: Power Module: which allows you to have more current for your 3D printer
Type K: SD Card Reader Module: Add an external SD Card reader
Type L: USB Module: Add an external USB Card port
![Page 13: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/13.jpg)
WHO IS CBD-TECH?
CBD-Tech Ltd. is a R&D company with its seat in China, Shenzhen
just 30 minutes from Hong Kong. The company mainly focuses on
3D Printing R&D, but also do external R&D related to the Makers
Space.
![Page 14: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/14.jpg)
CUSTOMER SUPPORT?
At current stage all customer service is handled by staff at www.3dfilamenta.com
You can also visit the official english forum for CBD-Tech here:
http://3dfilamenta.com/forum/forum-18.html
![Page 15: Datasheet chitu](https://reader030.fdocuments.net/reader030/viewer/2022012314/588054361a28ab22088b6405/html5/thumbnails/15.jpg)
WHERE TO BUY?
Official International Sales Agency is handled by Tradecore Ltd. (www.trcore.com) through its sales channel www.3dfilamenta.com
You can find the product here: http://3dfilamenta.com/motherboards/290-cbd-chitu-v31-3d-printer-main-board.html
If you want to be a distributor in your country, please send a email to [email protected]
ApplicationQualification
VerificationDiscussion Sign Contract Start Sale