data sheets A4 - HyDrive · 2016. 1. 23. · HYDRAULIC STEERING FOR OUTBOARD MOTORS OBKIT1 For...
Transcript of data sheets A4 - HyDrive · 2016. 1. 23. · HYDRAULIC STEERING FOR OUTBOARD MOTORS OBKIT1 For...
HYDRAULIC STEERING
TECHNICAL DATA SHEETS
Admiral SeriesRevised 31/3/11
Model 211BH
Model 210BH& 210BH-HP
Model 411BH
HELM UNITSThe new Admiral Series 401 and 402 helm units offer improved internal efficiencies and unique assembly design, consolidating HyDrive Engineering‘s position as a world-leader in hydraulic
boat steering. Two years of design development and testing have resulted in these helms being selected as the standard helm supplied in all HyDrive steering kits from 1st January 2010.
Sleek new shape to match modern console designs
Front-mount design for maximum appeal
Hi-Tech composite alloy housing material which is
stronger than aluminium and totally corrosion resistant for
maximum exposure to the elements
Improved internal efficiency
Smoothest and most powerful helm of its size
Brass wheel nutand washer
Stainless steel steering wheel shaft - not aluminium
Anti-splash filler cap for rough conditions
Unique assembly design for easeof service and maximum performance
Stainless steel studs, nuts & washerspre-fitted for convenience
Highly efficient non-return valves for non feedbackof helm unit - eliminates all torque from the steering cylinder
Field-replaceable shaftseal for ease of service
Model 401 Helm28cc per rev
Model 402 Helm35cc per rev
FEATURES
See rear pages for details on Model 101 & 102 helmsplus TILTING HELM options
401 Helm accessoriesThe new Bosun Series 401 and 402 helm units come with a
range of fitting options.
STANDARD FRONT-MOUNT
WEDGE MOUNTED TO +/- 20DEGREES
MID TO REAR MOUNT FOR LOWER PROFILE
WEDGE-401 20 degree wedge kit for mounting horizontal to vertical installationsfits any standard model 401 and 402 helm unit.
REAR-MOUNT Kit - fits any model 401 & 402 helm unit - adjustable from low-profile to full protrusion for maximum flexibility in helm placement. Simply trim the spacers and
studs to adjust the amount of penetration into the helm position. The front dash orconsole ring is fully O-ring sealed against pump body to prevent water ingress to the
rear of the console. Easy to fit - easy to adjust - looks great.
The new 401 & 402 series helms - now the most versatile helm on the market!
OU
TB
OA
RD
S
BULLHORN TYPE CYLINDERS
211BH “Bullhorn” CylinderThere are several different ways to steer outboard motors, mostly depending on the room available and the design of
the individual boat's engine well. By far the most popular of our Outboard steering cylinders are the “bullhorn” units.
The new 211BH cylinder is the latest in our range of top quality marine steering cylinders, utilising state-of-the-art
reinforced horn mouldings for absolute electrolytic insulation and high impact absorbtion which gives added
protection to the tiller mounting bolt.
What sets these HyDrive cylinders apart from the competition
is the materials used to build them. While other brands use
only anodised or painted aluminum alloy cylinders, the
HyDrive Admiral Series offers Chromed Brass,
Bronze and stainless steel - truly built for the
toughest marine environment. The 211BH
cylinder mounts very simply to the tilt-tube of the
outboard motor and fits neatly under the front of the
motor cowling. The compact design requires only 540mm clearance, considerably less space than our competitors.
Designed for use with single outboards up to 300HP or dual (counter-rotating) outboards up to combined 600HP.
BOSUN SERIES - Model 411BH
The model 411BH is a hard wearing and robust version of the
211BH made from anodised aluminium, and ideal for pleasure
use on outboards. This model is the perfect alternative to
other aluminium cylinders on the market as it features the
same electrolytic insulation design of the Model 211BH, which
ensures the most advanced protection against corrosion in a
low priced steering cylinder. Designed for use with single
outboards up to 300HP or dual (counter-rotating) outboards
up to combined 600HP.
It comes in kit for single station monohull: - BOSUN-KIT-1
Some model Honda outboards require BOSUN-KIT-1-HONDA
Admiral Series 210BH - Capable of handling single or
multiple outboard engine installations up to 1200HP
combined, this heavy duty version of the 211BH is the ideal
choice for high performance or heavy commercial use.
It comes in kit for single station monohull: - OBKIT1-HP
Some model Honda outboards require OBKIT1-HP-HONDA
Admiral Series 210BH-HP - the Extra Security version of the
210BH is designed for extremes. Supplied with split pin
security on all threaded items, it ensures that vibration and
shocks from severe long term pounding cannot threaten the
integrity of the unit. Perfect for power-steering on large
horsepower installations
It comes in kit for single station monohull:- OBKIT1-HP-XT
Model 411BH cylinder
Brilliant anodised marine aluminium with all stainless steel tiller plate & insulated mountings
Model 210BH cylinder&
Model 210BH-HP-XT
Durable and Powerful bronze, brass and stainless steel construction - the strongest cylinder in its class anywhere!
Typical installation of a bullhorn cylinder (Model 210BH pictured)
211BH cylinder Powerful all bronze, brassand stainless steel construction sets it apartfrom the others.
This unit comes in a kit for a single station monohull - Part No. OBKIT1. Some model Honda outboards require OBKIT1-HONDA
68
.8
11
1.6
68
.8
11
1.6
68
.8
11
1.66
8.8
11
1.6
HYDRAULIC STEERING FOROUTBOARD MOTORS
68
.8
11
1.6
68
.8
11
1.66
8.8
11
1.6
68
.8
11
1.66
8.8
11
1.66
8.8
11
1.6
Typical steering circuits for outboard motorsBullhorn type cylinders pictured but same circuits can be used on all cylinder types
HYDRAULIC STEERING
Single stationSingle engine
Single stationDual enginewith mechanicaltie-bar
Single stationSingle enginewith hydraulicautopilot
Dual stationSingle engine
Single stationDual enginewith fluid-link
hydraulic tie-bar
Single stationTriple engine
with fluid-link hydraulic tie-bar
Same circuit appliesto all cylinder combinationswhether single or twin
HYDRAULIC STEERING FOROUTBOARD MOTORS
PROKIT For Outboards in very narrow engine wells up to single 250HP
or dual outboards Counter-rotating up to 500HP total**
68
.8
11
1.6
539.8
68
.8
11
1.6
PROKITComplete Kit comprises:-Model 401 HelmModel 212BH cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 15Kg
492
11669
Model 212BH Cylinder dimensions
Capacity:- 135ccStroke:- 178mm
Weight:- 5Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY OUTBOARD**See steering circuits for multiple outboards and
catamaran installation options.
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
Cylinder constructionBronze, Brass and Stainless steel
WHEEL TURNSlock to lock
401 helm = 4.8402 helm = 3.8
**LIMITED STROKE - should only be used for enginewells that cannot be fitted with other full stroke models..
HYDRAULIC STEERING FOROUTBOARD MOTORS
OBKIT1 For Outboards up to single 300HP or dual outboards
Counter-rotating up to 600HP total
68
.8
11
1.6
539.8
68
.8
11
1.6
OBKIT1Complete Kit comprises:-Model 401 HelmModel 211BH cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 15Kg
540
11669
Model 211BH Cylinder dimensions
Capacity:- 154ccStroke:- 203mm
Weight:- 5Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY OUTBOARD**See steering circuits for multiple outboards and
catamaran installation options.
**For some model Honda and other 4-strokes the211BH-Honda version is required to avoid interferenceon motor cowling.
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
Cylinder constructionBronze, Brass and Stainless steel
WHEEL TURNSlock to lock
401 helm = 5.5402 helm = 4.4
HYDRAULIC STEERING FOROUTBOARD MOTORS
BOSUNKIT-1 For Outboards up to single 300HP or dual outboards
Counter-rotating up to 600HP total
68
.8
11
1.6
539.8
68
.8
11
1.6
BOSUNKIT-1Complete Kit comprises:-Model 401 HelmModel 411BH cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 13Kg
540
11669
Model 411BH Cylinder dimensions
Capacity:- 154ccStroke:- 203mm
Weight:- 3Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
**For some model Honda and other 4-strokes the411BH-Honda version is required to avoid interferenceon motor cowling.
See also optional helm choices for front-mount and tilting helms for this kit
SIMPLE INSTALLATION TO ANY OUTBOARD**See steering circuits for multiple outboards and
catamaran installation options.
HYDRAULIC STEERING
Cylinder constructionAnodised aluminium and Stainless steel
WHEEL TURNSlock to lock
401 helm = 5.5402 helm = 4.4
HYDRAULIC STEERING FOROUTBOARD MOTORS
OBKIT1-HP For Outboards up to single 350HP or MULTIPLE outboards
Counter-rotating up to 1200HP total
68
.8
11
1.6
OBKIT1-HPComplete Kit comprises:-Model 401 HelmModel 210BH cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 15Kg
Model 210BH Cylinder dimensions
Capacity:- 154ccStroke:- 203mm
Weight:- 5Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY OUTBOARD**See steering circuits for multiple outboards and
catamaran installation options.
**For some model Honda and other 4-strokes the210BH-Honda version is required to avoid interferenceon motor cowling.
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
Cylinder constructionBronze, Brass and Stainless steel
WHEEL TURNSlock to lock
401 helm = 5.5402 helm = 4.4
75.0
11
3.0
571.0615
131
HYDRAULIC STEERING FOROUTBOARD MOTORS
OBKIT1-HP-XT For Outboards up to single 350HP or MULTIPLE outboards
Counter-rotating up to 1200HP total
68
.8
11
1.6
OBKIT1-HP-XTComplete Kit comprises:-Model 401 HelmModel 210BH-XT cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 15Kg
Model 210BH-XT Cylinder dimensions
Capacity:- 154ccStroke:- 203mm
Weight:- 5Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY OUTBOARD**See steering circuits for multiple outboards and
catamaran installation options.
**For some model Honda and other 4-strokes the210BH-Honda version is required to avoid interferenceon motor cowling.
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
Cylinder constructionBronze, Brass and Stainless steel
WHEEL TURNSlock to lock
401 helm = 5.5402 helm = 4.4
75.0
11
3.0
571.0615
131
535.5 Mid Stroke Length
737.5 Full Stroke Length
HYDRAULIC STEERING FOROUTBOARD MOTORS
OBKIT5Complete Kit comprises:-Model 401 HelmModel 216FM cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 15Kg
Model 216FM Cylinder dimensions
Capacity:- 137ccStroke:- 203mm
Weight:- 5Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY OUTBOARD**See steering circuits for multiple outboards and
catamaran installation options.
**For some model Honda and other 4-strokes the211BH-Honda version is required to avoid interferenceon motor cowling.
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
Cylinder constructionBronze, Brass and Stainless steel
OBKIT5 For Outboards up to single 235HP or dual outboards
Counter-rotating up to 400HP total
WHEEL TURNSlock to lock
401 helm = 4.9402 helm = 3.9
HYDRAULIC STEERING FOROUTBOARDS & STERNDRIVES
SPORTKITComplete Kit comprises:-Model 401 HelmModel 212TN8 cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 11Kg
Model 212T Cylinder dimensions
Capacity:- 77ccStroke:- 203mm
Weight:- 2Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY OUTBOARD**See steering circuits for multiple outboards and
catamaran installation options.
**Unit designed to be used with standard outboardmotor drag-link supplied with the engine. Not includedin the kit as each outboard manufacturer and model hasdifferent drag-link design..
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
Cylinder constructionAnodised marine aluminium
and Stainless steel
SPORTKIT For Outboards up to single 200HP or dual outboards
Counter-rotating up to 300HP total
315mm
WHEEL TURNSlock to lock
401 helm = 2.75402 helm = 2.2
HYDRAULIC STEERING FOROUTBOARDS & STERNDRIVES
OBKIT3Complete Kit comprises:-Model 401 HelmModel 21OTSEN8 cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 12Kg
Model 210TSE unbalanced &
210T Balanced Cylinder dimensions
Capacity:- 154ccStroke:- 203mm
Weight:- 3Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY OUTBOARD**See steering circuits for multiple outboards and
catamaran installation options.
**Unit designed to be used with standard outboardmotor drag-link supplied with the engine. Not includedin the kit as each outboard manufacturer and model hasdifferent drag-link design..
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
Cylinder constructionMarine brass and Stainless steel
OBKIT2 & OBKIT3For Outboards up to single 235HP or dual outboards
Counter-rotating up to 600HP total
330mm540mm for 210T balanced cylinder
WHEEL TURNSlock to lock
401 helm = 5.5402 helm = 4.4
OBKIT2Complete Kit comprises:-Model 401 HelmModel 21OTN8 cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 12Kg
HYDRAULIC STEERING FOROUTBOARDS & STERNDRIVES
HydraCable KitComplete Kit comprises:-Model 401 HelmModel 212TN8 cylinderHydraCable and fitting kit2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 13Kg
Model 212T Cylinder dimensions
Capacity:- 77ccStroke:- 203mm
Weight:- 2Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY OUTBOARD**See steering circuits for multiple outboards.
**Unit designed to be used with standard outboardmotor drag-link supplied with the engine. Not includedin the kit as each outboard manufacturer and model hasdifferent drag-link design..
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
Cable constructioninner & outer
Stainless steel
HYDRAKIT-1 For Outboards up to single 200HP or dual outboards
Counter-rotating up to 300HP total
315mm
Cylinder constructionAnodised marine aluminium
and Stainless steel
HYDRAKIT-1 Cable length - 1 metreHYDRAKIT-1.5 Cable length - 1.5 metres
WHEEL TURNSlock to lock
401 helm = 2.75402 helm = 2.2
HYDRAULIC STEERING FOROUTBOARD MOTORS
OBKIT4Complete Kit comprises:-Model 401 HelmModel 210DE cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 15Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5KgSee also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
Cylinder constructionBronze, Brass and Stainless steel
OBKIT4 For Outboards up to twin outboards
on some catamaran installations
WHEEL TURNSlock to lock
401 helm = 5.5402 helm = 4.4
Model 210DE Cylinder dimensionsCapacity:- 154ccStroke:- 203mm
Weight:- 5Kg
HYDRAULIC STEERING FORSTERNDRIVES
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5KgSee also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
Cylinder constructionBronze, Brass and Stainless steel
VOLVOKIT For STERNDRIVES - VOLVO
MERCRUISER-KIT same details except 210MERC cylinder used
WHEEL TURNSlock to lock
401 helm = 4.4402 helm = 3.5
216V cylinder
HyDrive has released the new 216V sterndrive cylinder for VOLVO which is now being supplied as the standard model for all VOLVOKIT systems. The new model is designed for use on the Volvo Model DPS & SX sterndrives and has a new type of mounting plate, new drag link and spherical rod-end for better alignment. The cylinder is internally stroke-limited to avoid collision with the transom shield.
While the unit looks similar to the popular 210MERC cylinder for Mercruiser sterndrives, they are not interchangeable. Basic specifications of the VOLVO and MERCRUISER systems are the same - only the cylinder model is changed.
The original 210V cylinders should only be used on the older DPD to DPE models.
The new cylinder is more expensive, but does include the drag link which was not required with the older model and has heavier piston rod and rod-end, making it a significantly different unit.
Note: This cylinder type should only be used in installations where the standard 210T or 210TSE type cylinder cannot be used due to restricted side clearance. For POWER STEERING systems supplied with the stern-drive use the SPORTKIT
MERCRUISERKITComplete Kit comprises:-Model 401 HelmModel 210MERC cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 15Kg
VOLVOKITComplete Kit comprises:-Model 401 HelmModel 216V or 210V cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 15Kg
Model 210V, 216Vor 210MERC Cylinder details
Capacity:- 125ccStroke:- 186mm
Weight:- 5Kg
HYDRAULIC STEERING FORINBOARD MOTORS & JETS
SPORTKIT-1Complete Kit comprises:-Model 401 HelmModel 212N8 cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 12Kg
Model 212 Cylinder dimensions
Capacity:- 68ccStroke:- 182mm
Weight:- 2Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY INBOARD**See steering circuits for multiple rudders and
catamaran installation options.
.
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
SPORTKIT-1 For Inboard rudders or jets - Rudder torque:-40KgM
Cylinder constructionAnodised marine aluminium
and Stainless steel
WHEEL TURNSlock to lock
401 helm = 2.4402 helm = 2
Mounting Bracket
Rod End
HYDRAULIC STEERING FORINBOARD MOTORS & JETS
JETKITComplete Kit comprises:-Model 401 HelmModel 212JETN8 cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 12Kg
Model 212JET Cylinder dimensions
Capacity:- 39ccStroke:- 104mm
Weight:- 1Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY INBOARD**See steering circuits for multiple rudders and
catamaran installation options.
.
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
JETKIT For Inboard Jets - Rudder torque:-20KgM
Cylinder constructionAnodised marine aluminium
and Stainless steel
WHEEL TURNSlock to lock
401 helm = 1.4402 helm =1.1
Mounting Bracket
Rod End
HYDRAULIC STEERING FORINBOARD MOTORS & JETS
IBKIT-1Complete Kit comprises:-Model 401 HelmModel 210N8 cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 15Kg
Model 210 Cylinder dimensions
Capacity:- 154ccStroke:- 204mm
Weight:- 5Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY INBOARD**See steering circuits for multiple rudders and
catamaran installation options.
.
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
IBKIT-1 For Inboard rudders or jets - Model 210 cylinder
Rudder torque:-85KgM
WHEEL TURNSlock to lock
401 helm = 5.5402 helm = 4.4
527121
41
47
661
76
106
330 210
95
Rod End
HYDRAULIC STEERING FORINBOARD MOTORS & JETS
IBKIT-3Complete Kit comprises:-Model 401 HelmModel 216N8 cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 15Kg
Model 216 Cylinder dimensions
Capacity:- 137ccStroke:- 204mm
Weight:- 5Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY INBOARD**See steering circuits for multiple rudders and
catamaran installation options.
.
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
IBKIT-3 For Inboard rudders or jets - Model 216 cylinder
Rudder torque:-80KgM
WHEEL TURNSlock to lock
401 helm = 4.9402 helm = 3.9
527121
41
47
661
76
106
330 210
95
Mounting Bracket
Rod End
HYDRAULIC STEERING FORINBOARD MOTORS & JETS
IBKIT-2Complete Kit comprises:-Model 401 HelmModel 210SEN8 cylinder2 litres ULTRA-15 fluid15Mtrs 3/8” OD Nylon tubingBleeding KitAll fittingsInstallation ManualPacked weight 15Kg
Model 210SE Cylinder dimensions
Capacity:- 154ccStroke:- 204mm
Weight:- 5Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY INBOARD**See steering circuits for multiple rudders and catamaran installation options. - Note: single
ended cylinders must be fitted mirror-image on fluid link circuits.
.
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
IBKIT-2 - Unbalanced For Inboard rudders or jets - Model 210SE cylinder
Rudder torque:-85KgM
WHEEL TURNSlock to lock
401 helm = 5.5-6.4402 helm = 4.4-5.2
527121
41
47
578
76
106
330 210
95
Mounting Bracket
Rod End
HYDRAULIC STEERING FORINBOARD MOTORS & JETS
IBKIT-4Complete Kit comprises:-Model 401 HelmModel 213C12 cylinder2 litres ULTRA-15 fluid1 pair high pressure flex hosesto suit ½”copper tubing Bleeding KitAll fittingsInstallation ManualPacked weight 15Kg
Model 213 Cylinder dimensions
Capacity:- 174ccStroke:- 204mm
Weight:- 5Kg
Model 401 and 402 Helm pump dimensions
Model 401 Capacity:-28cc/revModel 402 Capacity:-35cc/revIn-built Lock valveMaximum working pressure:- 1000psiAbsolute maximum pressure:- 1500psiWeight:- 5Kg
SIMPLE INSTALLATION TO ANY INBOARD**See steering circuits for multiple rudders and
catamaran installation options.
.
See also optional helm choices for front-mount and tilting helms for this kit HYDRAULIC STEERING
IBKIT-4-C For Inboard rudders or jets - Model 213 cylinder
Rudder torque:-110KgM
WHEEL TURNSlock to lock
401 helm = 6.2402 helm = 4.9
527121
661
76
335 205
95
Rod End
NOTE: This system should be used withonly steel or copper tubing - ½”OD
Tired of fighting with the steering on yourboat? Then let an Admiral put you in command.HyDrive, Australia's largest selling hydraulic
steering for small boats, offers the finest in smooth,
powerful steering with quality and materials that are
built to last. Large horsepower outboards are
handled with comfort and without feedback from
engine torque.
It doesn't matter whether you have a small boat with
a small outboard, or a larger craft with multiple V-8's,
there is a HyDrive Admiral to suit. Everything you
need to handle virtually any boat using outboards,
inboards, sterndrives or jet units from 4-15 Metres -
delivered in a single carton!
The heart of the Admiral Series is the HyDrive
Model 101( 28cc/rev) and 102 (35cc/rev) helm unit.
These 7-piston pumps are precision manufactured
to standards and tolerances that are second to
none. In-built lock valves, which eliminate torque
feedback are standard. The light, smooth steering
must be experienced to be appreciated.
The Admiral Helm unitCompact low-profile standard helm with minimal protrusion from the console.Optional front mount or tilting helm style.In-built lock -valve eliminates torque feedback. The wheel stays where you put it!F i e l d r e p l a c e a b l e s h a f t s e a l .Solid stainless steel helm shaft for optimum s t r e n g t h a n d d u r a b i l i t y . S o m e manufacturers use “hardened alloy” (anodised aluminium) for economy- nothing is better than stainless steel, it just costs more to make. Superior material choice - even the wheel nut and washer are brass. (One major manufacturer uses plated steel!)4 precision bearings for smoothest performance. All helms are built to High Performance standards - you don't have to pay more for HyDrive Power!-
Fully tilting helm designModel 101-Tilt or 102 Tilt
Model 101 & 102 Helm unitalternative to model 401 and 402 helm unit - mid-mount
The HyDrive Admiral Tilt-helm unit is designed to mount flat to any surface and give a tilt angle of up to 20 degrees in each direction. Perfect for that awkward flybridge or lower vertical bulkhead.
Available only as the model 101 equivalent, this tilt helm combines a great water resistant design and practical good looks. It is ideal for leisure and light commercial use - subject to being used to turn the wheel and not to support the weight of the operator in heavy seas - see warning.
POWER STEERING TILT HELMHyDrive can now offer probably the only full tilting power-steering helm unit. This is not to be confused with a manual helm which may be used on a servo-system, but a fully dedicated power hydraulic helm unit. These u n i t s a r e o n l y a v a i l a b l e i n displacements from 50cc to 80cc per revolution. Ideal for use with the POWERKIT-12 systems..
.
The model 101-TILT
Model PS-TILT
Basic Dimensions
Simple to fit
WARNING RE: USE OF TILT MECHANISM
It is important to note that the tilt mechanism attached to this steering helm is designed to transmit the wheel turn through an angle of +/- 20 degrees and is fully adjustable. It is a rather complex device with several moving parts and is not designed for use as a support for full body weight in heavy seas.
The weight of an average build person being thrown around in heavy seas can generate a large amount of force onto the rim of the steering wheel. This force is multiplied by the lever effect of the steering wheel and can result in internal damage to the tilt unit. Simply rotating the steering wheel normally to ‘steer’ the boat cannot damage it.
Boat operators should use grab-rails to support their weight whilst standing and not rely on the strength of the steering
unit itself.
TILTING HELM OPTIONS
OBKIT1OUTBOARD KIT
Complete with:-1 x 401N8 helm1 x 211BH cylinder2 litres ULTRA-1515M nylon hydaulic tubingFittingsBleeding kitInstructions
**OBKIT1-HONDA for honda**
OBKIT1-HPOUTBOARD KIT
Complete with:-1 x 401N8 helm1 x 210BH cylinder2 litres ULTRA-1515M nylon hydaulic tubingFittingsBleeding kitInstructions
MODEL 211BHMODEL 211BH-HONDA
MODEL 210BHMODEL 210BH-HONDA
BULLHORN-STYLE KIT RANGEPACKING DETAILS & CODES
OBKIT1&
OBKIT1-HONDA
OBKIT1-HP&
Honda version
OBKIT1-HP-XTOUTBOARD KIT
Complete with:-1 x 401N8 helm1 x 210BH-HP cylinder2 litres ULTRA-1515M nylon hydaulic tubingFittingsBleeding kitInstructions
MODEL 210BH-HPMODEL 210BH-HP-HONDA
OBKIT1-HP-XT&
Honda Version
BOSUN KIT-1OUTBOARD KIT
Complete with:-1 x 401N8 helm1 x 411BH cylinder2 litres ULTRA-1515M nylon hydaulic tubingFittingsBleeding kitInstructions
**BOSUN KIT-1-HONDA**
MODEL 411BHMODEL 411BH-HONDA
BOSUNKIT-1&
Honda Version
BULLHORN-STYLE KIT RANGEPACKING DETAILS & CODES
PROKITOUTBOARD KIT
Complete with:-1 x 401N8 helm1 x212BH cylinder2 litres ULTRA-1515M nylon hydaulic tubingFittingsBleeding kitInstructions
**PROKIT-HONDA**
PROKIT&
Honda Version
MODEL 212BHMODEL 212BH-HONDA