DATA S BULL NOSE - Hole Opener
1
CORPORATE HEADQUARTERS 103 Southpark Road Lafayette, LA 70508 USA T: (337) 837-3314 F: (337) 837-3058 E: [email protected] www.HoleOpener.com/Bull-Nose BHA COMPONENTS TECHNICAL DATA SHEET HOC BN102017 Part ID BN-350 BN-475 BN-06 BN-08 BN-950 (A) Outside Diameter 3.50” 4.75” 6.00” 8.00” 9.50” (B) Length 1 30.00” 36.00” 38.00” 42.00” 42.00” (C) Connecon 2 2-3/8” Reg Pin 3-1/2” Reg Pin 4-1/2” Reg Pin 7-5/8” Reg Pin 7-5/8” Reg Pin (D) Internal Diameter 1.00” 1.50” 2.25” 2.81” 3.00” (E) Nozzle Type Reed Series C Reed Series C Reed Series C Reed Series C Reed Series C Material 4145 HT 4145 HT 4145 HT 4145 HT 4145 HT BULL NOSE TECHNICAL SUMMARY The HOC Bull Nose is designed to guide the BHA assembly in a pre-drilled pilot hole where deviation and angle are common. The Bull Nose is the most effective way to prevent side tracking. FEATURES Machined from 4145 HT steel giving it exceptional strength A standard Bull Nose has one jet port in the end. It can be blanked or fitted with a nozzle The jet nozzles housing/bushing can be replaced in the field should it become damaged. Jet Nozzles are also interchangeable with other HOC tools. Reversed jetting ports offered on custom bull noses 1. Lengths listed are from shoulder of connection to end. Lengths are common to Gulf of Mexico operations but may vary depending on location, formation and customer preference. 2. Standard bull noses have bit bevels on connection. 3. It is recommended to run a blank nozzle in highly deviated holes. TECHNICAL SPECIFICATIONS AND OPERATING PARAMETERS
Transcript of DATA S BULL NOSE - Hole Opener
CORPORATE HEADQUARTERS103 Southpark RoadLafayette, LA 70508 USAT: (337) 837-3314F: (337) 837-3058E: [email protected] www.HoleOpener.com/Bull-Nose
BHACOMPONENTS
TECHNICALDATASHEET
HOCBN102017
Part ID BN-350 BN-475 BN-06 BN-08 BN-950
(A) Outside Diameter 3.50” 4.75” 6.00” 8.00” 9.50”
(B) Length 1 30.00” 36.00” 38.00” 42.00” 42.00”
(C) Connection 2 2-3/8” Reg Pin 3-1/2” Reg Pin 4-1/2” Reg Pin 7-5/8” Reg Pin 7-5/8” Reg Pin
(D) Internal Diameter 1.00” 1.50” 2.25” 2.81” 3.00”
(E) Nozzle Type Reed Series C Reed Series C Reed Series C Reed Series C Reed Series C
Material 4145 HT 4145 HT 4145 HT 4145 HT 4145 HT
BULL NOSE
TECHNICAL SUMMARYThe HOC Bull Nose is designed to guide the BHA assembly in a pre-drilled pilot hole wheredeviation and angle are common. The Bull Noseis the most effective way to prevent side tracking.
FEATURESMachined from 4145 HT steel giving it exceptional strengthA standard Bull Nose has one jet port in the end. It can be blankedor fitted with a nozzleThe jet nozzles housing/bushing can be replaced in the field should itbecome damaged.Jet Nozzles are also interchangeable with other HOC tools.Reversed jetting ports offered on custom bull noses
1. Lengths listed are from shoulder of connection to end. Lengths are common to Gulf of Mexico operations but may vary depending on location, formation and customer preference.2. Standard bull noses have bit bevels on connection.3. It is recommended to run a blank nozzle in highly deviated holes.
TECHNICAL SPECIFICATIONS AND OPERATING PARAMETERS
