DATA ACQUISITION & KPI PORTAL...The Rigsmart KPI Portal has an HTML interface that allows for...
4
DATA ACQUISITION & KPI PORTAL Greater visibility means greater efficiency for your well, workover or completion. Rig Safety. Made Simple.
Transcript of DATA ACQUISITION & KPI PORTAL...The Rigsmart KPI Portal has an HTML interface that allows for...
DATA ACQUISITION& KPI PORTALGreater visibility means greater efficiencyfor your well, workover or completion.
Rig Safety. Made Simple.
The Rigsmart KPI PortalRigsmart is well known globally for our accurate and reliable wireless sensors. Our equipment has proven to be effective in every oilfield environment around the world, both on and off-shore.
Drive efficiency with the Rigsmart DAS and KPI portal. The wireless systems are scalable and the userinterface is customizable. Focus on the information that is important to your operation. Create customized logging reports and apply analytics to improve your workover operations.
Rugged, wireless sensors monitor equipmentand transmit data to the DAS for processing, display, logging, and analysis
16 gauge steel body construction, welded seams and poured-in-place gaskets ensurecontinuous, accurate duty in the toughest rigenvironments and all weather conditions
Key Performance Indicators can drive efficiencyin your well workover. The Rigsmart Wireless Data Acquisition System (DAS) can be fitted to allworkover rigs quickly and easily.
Customize the user interface to show only the components necessary for the job, and quickly adjust every setting, limit, alarm point, or any other vital parameter.
The Data Acquisition System (DAS) is the centralprocessing unit, and collects all functional data that is relevant to any operation
DATA ACQUISITION
WIRELESS SENSORS MONITOR:
BLOCK HEIGHT
DRILL DEPTH
RPM
SLIP STATUS
TEMPERATURE
WIND SPEED
TORQUE
H2S/LEL DETECTION
PRESSURE
LEVEL
FLOW
LOAD
100Radio Strength
0Packet Count
224ID
FalseEnable
FalseActivate
Diagnostic
Configuration
OKCrown Saver Status
Crown Saver
15,000 psiMax Rising Pressure
Limit
Configuration
Calibration
168 psi
Pressure 7
181ID
TrueEnable
TrueActivate
Pressure
CUSTOMIZABLE USER INTERFACE
DYNAMIC LOG ANALYSIS
The Rigsmart DAS and KPI Portal allows users to customize viewing and logs. Events can be isolated to specific dates and times.
Data analytics provides information that will lead to greater efficiency in your workover operation. This flexible tool can be quickly and easily customized to suit your equipment, location and well type.
Data is recorded locally on the rig, and optionally uploaded to a cloud database. From smaller rigs pulling rods,to large mobile rigs drilling out multiple plugs in long laterals, the end user can choose the data they wantcollected and displayed through a customized dashboard.
The Rigsmart KPI Portal has an HTML interface that allows for viewing from anyphone, tablet or laptop and can be accessed via a local Wi-Fi connection.
The system saves to a cloud through an LTE signal or data feed to an existing satellitesystem. If cell or satellite service are unavailable on the jobsite, the system will trendand save data offline, then upload to the cloud when connection resumes.
Rich visualizations provide complete status at a glance, tailored to any set of specific needs.
Each Rigsmart sensor offers its own device manager, for customization of units of measure, alarm states, logging
All alarms, are clearly display and logged,indicated by type, time, date and status.
Bypass Alarms
Bypass Alarms
Driller Panel
Swap Mode
Swap Trip Mode
Skate Position
Zero
5,111.2 gal
Volume
2” Flow Meter
Zero
0.2 gal
Volume
1” Flow Meter
55.6 ft
Height
Block Height
Open
Status
7” Ram 2B
Open
Status
7” Ram 2A
Open
Status
11” Ram 1B
Open
Status
11”
4 psi (0%)
Pressure
Accumulator Pressure
2,600 lb (1%)
Weight
Load
77.1 ft
Crown Saver Height
Block Height
powered by SMARTRIG
9:40 AM MDTPipe TallyReportingDevicesDashboardDashboardMULTIPANEL...
L: 20’ OD: 5” afterJoint: 30Test Tool 6
L: 20’ OD: 5” afterJoint: 25Test Tool 5
L: 20’ OD: 5” afterJoint: 20Test Tool 4
L: 20’ OD: 5” afterJoint: 15Test Tool 3
L: 20’ OD: 5” afterJoint: 10Test Tool 2
L: 20’ OD: 5” afterJoint: 5Test Tool
L: 20’ OD: 5”BHA
Elevation: 25”Kelly Bushing
Pipe-+DHT-+BHA-+KB-+
SkipPipe OutPipe In
+Trip Adjustment -Trip Adjustment
+Trip Out
Next Joint Out: 0
-Trip Out
+Trip In
Next Joint In: 9
Last Joint In: 8
Joints Remaining to Target: 7
Target Depth feet
-Trip In
On Surface Count: 102
In Hole Count: 8
25 ftKB
20 ftBHA -
20 ftDHT +
240 ftPipe +
278 ftDepth =
Trip Mode Clear TripPipe TallyTrip
powered by SMARTRIG
9:40 AM MDTPipe TallyPipe TallyReportingDevicesDashboardMULTIPANEL...
100Radio Strength
0Packet Count
224ID
FalseEnable
FalseActivate
Diagnostic
Configuration
OKCrown Saver Status
Crown Saver
180
TrueEnable
TrueActivate
Diagnostic
Limit
Calibration
Configuration
937 psiPressure
Pressure 6
ID
TrueActivate
TrueEnable
161ID
JarringSet Mode
900 lbPeak Weight
Configuration
800 lbWeight
Load
Limit 15,000 psiMax Rising Pressure
Limit
Configuration
Calibration
168 psi
Pressure 7
181ID
TrueEnable
TrueActivate
Pressure
TrueOutput 6 Status
TrueOutput 5 Status
FalseOutput 4 Status
FalseOutput 3 Status
FalseOutput 2 Status
FalseOutput 1 Status
Diagnostic
Configuration
Driller IMD
Filter Search...
9:40 AM MDTPipe TallyReportingDashboardMULTIPANEL... Devices
TAKEACTIONTOWARDREDUCING INCIDENTS,COSTS, AND NPT.
CONTACT THE EXPERTS AT RIGSMART TODAY
(780) 438-9475
rigsmart.com
[email protected] | [email protected]
MEETING OR EXCEEDINGPRODUCER BID REQUIREMENTSRigsmart safety equipment is approved and meetsand/or exceeds the guidelines set forth by the followingregulatory bodies:
